From 128ebb89c50e5452704de82d78845baeb3333c24 Mon Sep 17 00:00:00 2001 From: Amelie Delaunay Date: Tue, 27 Jun 2017 17:45:17 +0200 Subject: spi: stm32: use normal conditional statements instead of ternary operator This patch replace ternary operator use by normal condition statements to ease code reading. It also removes redundant !!. Signed-off-by: Amelie Delaunay Signed-off-by: Mark Brown --- drivers/spi/spi-stm32.c | 44 ++++++++++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 14 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-stm32.c b/drivers/spi/spi-stm32.c index 3df4baa..123529a 100644 --- a/drivers/spi/spi-stm32.c +++ b/drivers/spi/spi-stm32.c @@ -267,7 +267,10 @@ static int stm32_spi_prepare_mbr(struct stm32_spi *spi, u32 speed_hz) return -EINVAL; /* Determine the first power of 2 greater than or equal to div */ - mbrdiv = (div & (div - 1)) ? fls(div) : fls(div) - 1; + if (div & (div - 1)) + mbrdiv = fls(div); + else + mbrdiv = fls(div) - 1; spi->cur_speed = spi->clk_rate / (1 << mbrdiv); @@ -285,9 +288,12 @@ static u32 stm32_spi_prepare_fthlv(struct stm32_spi *spi) /* data packet should not exceed 1/2 of fifo space */ half_fifo = (spi->fifo_size / 2); - fthlv = (spi->cur_bpw <= 8) ? half_fifo : - (spi->cur_bpw <= 16) ? (half_fifo / 2) : - (half_fifo / 4); + if (spi->cur_bpw <= 8) + fthlv = half_fifo; + else if (spi->cur_bpw <= 16) + fthlv = half_fifo / 2; + else + fthlv = half_fifo / 4; /* align packet size with data registers access */ if (spi->cur_bpw > 8) @@ -462,9 +468,9 @@ static bool stm32_spi_can_dma(struct spi_master *master, struct stm32_spi *spi = spi_master_get_devdata(master); dev_dbg(spi->dev, "%s: %s\n", __func__, - (!!(transfer->len > spi->fifo_size)) ? "true" : "false"); + (transfer->len > spi->fifo_size) ? "true" : "false"); - return !!(transfer->len > spi->fifo_size); + return (transfer->len > spi->fifo_size); } /** @@ -493,7 +499,8 @@ static irqreturn_t stm32_spi_irq(int irq, void *dev_id) * Full-Duplex, need to poll RXP event to know if there are remaining * data, before disabling SPI. */ - mask |= ((spi->rx_buf && !spi->cur_usedma) ? SPI_SR_RXP : 0); + if (spi->rx_buf && !spi->cur_usedma) + mask |= SPI_SR_RXP; if (!(sr & mask)) { dev_dbg(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n", @@ -656,12 +663,18 @@ static void stm32_spi_dma_config(struct stm32_spi *spi, enum dma_slave_buswidth buswidth; u32 maxburst; - buswidth = (spi->cur_bpw <= 8) ? DMA_SLAVE_BUSWIDTH_1_BYTE : - (spi->cur_bpw <= 16) ? DMA_SLAVE_BUSWIDTH_2_BYTES : - DMA_SLAVE_BUSWIDTH_4_BYTES; + if (spi->cur_bpw <= 8) + buswidth = DMA_SLAVE_BUSWIDTH_1_BYTE; + else if (spi->cur_bpw <= 16) + buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES; + else + buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES; /* Valid for DMA Half or Full Fifo threshold */ - maxburst = (spi->cur_fthlv == 2) ? 1 : spi->cur_fthlv; + if (spi->cur_fthlv == 2) + maxburst = 1; + else + maxburst = spi->cur_fthlv; memset(dma_conf, 0, sizeof(struct dma_slave_config)); dma_conf->direction = dir; @@ -920,9 +933,12 @@ static int stm32_spi_transfer_one_setup(struct stm32_spi *spi, ~cfg2_clrb) | cfg2_setb, spi->base + STM32_SPI_CFG2); - nb_words = DIV_ROUND_UP(transfer->len * 8, - (spi->cur_bpw <= 8) ? 8 : - (spi->cur_bpw <= 16) ? 16 : 32); + if (spi->cur_bpw <= 8) + nb_words = transfer->len; + else if (spi->cur_bpw <= 16) + nb_words = DIV_ROUND_UP(transfer->len * 8, 16); + else + nb_words = DIV_ROUND_UP(transfer->len * 8, 32); nb_words <<= SPI_CR2_TSIZE_SHIFT; if (nb_words <= SPI_CR2_TSIZE) { -- cgit v1.1