From ddf0e1c20d8b72c409e4c954002069445babc762 Mon Sep 17 00:00:00 2001 From: Martin Sperl Date: Thu, 15 Oct 2015 10:09:11 +0000 Subject: spi: bcm2835: change initialization order and switch to platform_get_irq Change the initialization order of the HW so that the interrupt is only requested after the HW is initialized Also the use of irq_of_parse_and_map is replaced by platform_get_irq. Signed-off-by: Martin Sperl Signed-off-by: Mark Brown --- drivers/spi/spi-bcm2835.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/spi/spi-bcm2835.c') diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index e7874a6..370822e 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -777,7 +777,7 @@ static int bcm2835_spi_probe(struct platform_device *pdev) goto out_master_put; } - bs->irq = irq_of_parse_and_map(pdev->dev.of_node, 0); + bs->irq = platform_get_irq(pdev, 0); if (bs->irq <= 0) { dev_err(&pdev->dev, "could not get IRQ: %d\n", bs->irq); err = bs->irq ? bs->irq : -ENODEV; @@ -786,6 +786,12 @@ static int bcm2835_spi_probe(struct platform_device *pdev) clk_prepare_enable(bs->clk); + bcm2835_dma_init(master, &pdev->dev); + + /* initialise the hardware with the default polarities */ + bcm2835_wr(bs, BCM2835_SPI_CS, + BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); + err = devm_request_irq(&pdev->dev, bs->irq, bcm2835_spi_interrupt, 0, dev_name(&pdev->dev), master); if (err) { @@ -793,12 +799,6 @@ static int bcm2835_spi_probe(struct platform_device *pdev) goto out_clk_disable; } - bcm2835_dma_init(master, &pdev->dev); - - /* initialise the hardware with the default polarities */ - bcm2835_wr(bs, BCM2835_SPI_CS, - BCM2835_SPI_CS_CLEAR_RX | BCM2835_SPI_CS_CLEAR_TX); - err = devm_spi_register_master(&pdev->dev, master); if (err) { dev_err(&pdev->dev, "could not register SPI master: %d\n", err); -- cgit v1.1