From 2d0cfb527944c2cfee2cffab14f52d483e329fcf Mon Sep 17 00:00:00 2001 From: Patrick Gefre Date: Sat, 14 Jan 2006 13:20:40 -0800 Subject: [PATCH] Altix: ioc3 serial support Add driver support for a 2 port PCI IOC3-based serial card on Altix boxes: This is a re-submission. On the original submission I was asked to organize the code so that the MIPS ioc3 ethernet and serial parts could be used with this driver. Stanislaw Skowronek was kind enough to provide the shim layer for this - thanks Stanislaw. This patch includes the shim layer and the Altix PCI ioc3 serial driver. The MIPS merged ioc3 ethernet and serial support is forthcoming. Signed-off-by: Patrick Gefre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/sn/Kconfig | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/sn/Kconfig') diff --git a/drivers/sn/Kconfig b/drivers/sn/Kconfig index 13b8d24..d95265b1 100644 --- a/drivers/sn/Kconfig +++ b/drivers/sn/Kconfig @@ -17,4 +17,18 @@ config SGI_IOC4 If you have an SGI Altix with an IOC4-based I/O controller say Y. Otherwise say N. +config SGI_IOC3 + tristate "SGI IOC3 Base IO support" + depends on (IA64_GENERIC || IA64_SGI_SN2) + default m + ---help--- + This option enables basic support for the SGI IOC3-based Base IO + controller card. This option does not enable any specific + functions on such a card, but provides necessary infrastructure + for other drivers to utilize. + + If you have an SGI Altix with an IOC3-based + I/O controller or a PCI IOC3 serial card say Y. + Otherwise say N. + endmenu -- cgit v1.1