From 19a74263f49dce2b96e2213f7f4c029cedbbf0ce Mon Sep 17 00:00:00 2001 From: Stephen Neuendorffer Date: Thu, 3 Apr 2008 03:52:13 +1100 Subject: [POWERPC] of_serial: Fix possible null dereference. The of_serial driver queries the current-speed property and attempts to use it to register the custom_divisor property of the uart_port. However, if current-speed is not set, then this code will dereference a bad pointer. The fix is to only set custom_divisor when a current-speed property appears in the device tree. Signed-off-by: Stephen Neuendorffer Signed-off-by: John Linn Signed-off-by: Josh Boyer --- drivers/serial/of_serial.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/serial') diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index c0e50a4..8aacfb7 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -56,7 +56,9 @@ static int __devinit of_platform_serial_setup(struct of_device *ofdev, port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT; port->dev = &ofdev->dev; - port->custom_divisor = *clk / (16 * (*spd)); + /* If current-speed was set, then try not to change it. */ + if (spd) + port->custom_divisor = *clk / (16 * (*spd)); return 0; } -- cgit v1.1 From d464df2667cf181419604e656773f80996cf0470 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 10 Apr 2008 17:01:27 +0200 Subject: [POWERPC] cpm_uart: Allocate DPRAM memory for SMC ports on CPM2-based platforms. This patch allocates parameter RAM for SMC serial ports without relying on previous initialisation by a boot loader or a wrapper layer. SMC parameter RAM on CPM2-based platforms can be allocated anywhere in the general-purpose areas of the dual-port RAM. The current code relies on the boot loader to allocate a section of general-purpose CPM RAM and gets the section address from the device tree. This patch modifies the device tree address usage to reference the SMC parameter RAM base pointer instead of a pre-allocated RAM section and allocates memory from the CPM dual-port RAM when initialising the SMC port. CPM1-based platforms are not affected. Signed-off-by: Laurent Pinchart Acked-by: Scott Wood Signed-off-by: Kumar Gala --- drivers/serial/cpm_uart/cpm_uart.h | 3 ++ drivers/serial/cpm_uart/cpm_uart_core.c | 19 ++++++------ drivers/serial/cpm_uart/cpm_uart_cpm1.c | 14 +++++++++ drivers/serial/cpm_uart/cpm_uart_cpm2.c | 52 +++++++++++++++++++++++++++++++++ 4 files changed, 78 insertions(+), 10 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index 32b9737..0cc39f8 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -92,6 +92,9 @@ extern struct uart_cpm_port cpm_uart_ports[UART_NR]; /* these are located in their respective files */ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np); +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram); int cpm_uart_init_portdesc(void); int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); void cpm_uart_freebuf(struct uart_cpm_port *pinfo); diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 236af9d..a638ba0 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -966,24 +966,23 @@ static int cpm_uart_init_port(struct device_node *np, if (!mem) return -ENOMEM; - pram = of_iomap(np, 1); - if (!pram) { - ret = -ENOMEM; - goto out_mem; - } - if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") || of_device_is_compatible(np, "fsl,cpm2-scc-uart")) { pinfo->sccp = mem; - pinfo->sccup = pram; + pinfo->sccup = pram = cpm_uart_map_pram(pinfo, np); } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") || of_device_is_compatible(np, "fsl,cpm2-smc-uart")) { pinfo->flags |= FLAG_SMC; pinfo->smcp = mem; - pinfo->smcup = pram; + pinfo->smcup = pram = cpm_uart_map_pram(pinfo, np); } else { ret = -ENODEV; - goto out_pram; + goto out_mem; + } + + if (!pram) { + ret = -ENOMEM; + goto out_mem; } pinfo->tx_nrfifos = TX_NUM_FIFO; @@ -1007,7 +1006,7 @@ static int cpm_uart_init_port(struct device_node *np, return cpm_uart_request_port(&pinfo->port); out_pram: - iounmap(pram); + cpm_uart_unmap_pram(pinfo, pram); out_mem: iounmap(mem); return ret; diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 6ea0366..74f1432 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -45,6 +45,8 @@ #include #include +#include + #include "cpm_uart.h" /**************************************************************/ @@ -54,6 +56,18 @@ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { cpm_command(port->command, cmd); } + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + return of_iomap(np, 1); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + iounmap(pram); +} + #else void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c index d9af06a..bb862e2 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c @@ -41,6 +41,9 @@ #include #include #include +#ifdef CONFIG_PPC_CPM_NEW_BINDING +#include +#endif #include #include @@ -54,6 +57,55 @@ void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { cpm_command(port->command, cmd); } + +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np) +{ + void __iomem *pram; + unsigned long offset; + struct resource res; + unsigned long len; + + /* Don't remap parameter RAM if it has already been initialized + * during console setup. + */ + if (IS_SMC(port) && port->smcup) + return port->smcup; + else if (!IS_SMC(port) && port->sccup) + return port->sccup; + + if (of_address_to_resource(np, 1, &res)) + return NULL; + + len = 1 + res.end - res.start; + pram = ioremap(res.start, len); + if (!pram) + return NULL; + + if (!IS_SMC(port)) + return pram; + + if (len != 2) { + printk(KERN_WARNING "cpm_uart[%d]: device tree references " + "SMC pram, using boot loader/wrapper pram mapping. " + "Please fix your device tree to reference the pram " + "base register instead.\n", + port->port.line); + return pram; + } + + offset = cpm_dpalloc(PROFF_SMC_SIZE, 64); + out_be16(pram, offset); + iounmap(pram); + return cpm_muram_addr(offset); +} + +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) +{ + if (!IS_SMC(port)) + iounmap(pram); +} + #else void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { -- cgit v1.1 From 56626f335b76eecd79d07fb21d0e625eb4aa52da Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 11 Apr 2008 20:06:54 +0400 Subject: [POWERPC] QE: UCC nodes cleanup - get rid of `model = "UCC"' in the ucc nodes It isn't used anywhere, so remove it. If we'll ever need something like this, we'll use compatible property instead. - replace last occurrences of device-id with cell-index. Drivers are modified for backward compatibility's sake. Signed-off-by: Anton Vorontsov Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- drivers/serial/ucc_uart.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index e0994f0..5e4310c 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -1270,10 +1270,18 @@ static int ucc_uart_probe(struct of_device *ofdev, /* Get the UCC number (device ID) */ /* UCCs are numbered 1-7 */ - iprop = of_get_property(np, "device-id", NULL); - if (!iprop || (*iprop < 1) || (*iprop > UCC_MAX_NUM)) { - dev_err(&ofdev->dev, - "missing or invalid UCC specified in device tree\n"); + iprop = of_get_property(np, "cell-index", NULL); + if (!iprop) { + iprop = of_get_property(np, "device-id", NULL); + if (!iprop) { + dev_err(&ofdev->dev, "UCC is unspecified in " + "device tree\n"); + return -EINVAL; + } + } + + if ((*iprop < 1) || (*iprop > UCC_MAX_NUM)) { + dev_err(&ofdev->dev, "no support for UCC%u\n", *iprop); kfree(qe_port); return -ENODEV; } -- cgit v1.1