From fa5da2f7bdcf885efe65a37df13907c7d72296f6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 8 Mar 2007 17:27:37 +0900 Subject: sh: Bring kgdb back from the dead. This code has suffered quite a bit of bitrot, do some basic tidying to get it to a reasonably functional state again. This gets the basic support and the console working again. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 53 ++++++++++++++++++++++++++++++------------------- 1 file changed, 33 insertions(+), 20 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 46c40bb..4b17f84 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -46,6 +46,7 @@ #endif #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) +#include #include #include #include @@ -163,7 +164,7 @@ static void put_string(struct sci_port *sci_port, const char *buffer, int count) usegdb |= sh_bios_in_gdb_mode(); #endif #ifdef CONFIG_SH_KGDB - usegdb |= (kgdb_in_gdb_mode && (port == kgdb_sci_port)); + usegdb |= (kgdb_in_gdb_mode && (sci_port == kgdb_sci_port)); #endif if (usegdb) { @@ -204,7 +205,7 @@ static int kgdb_sci_getchar(void) int c; /* Keep trying to read a character, this could be neater */ - while ((c = get_char(kgdb_sci_port)) < 0) + while ((c = get_char(&kgdb_sci_port->port)) < 0) cpu_relax(); return c; @@ -212,7 +213,7 @@ static int kgdb_sci_getchar(void) static inline void kgdb_sci_putchar(int c) { - put_char(kgdb_sci_port, c); + put_char(&kgdb_sci_port->port, c); } #endif /* CONFIG_SH_KGDB */ @@ -738,7 +739,7 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) #ifdef CONFIG_SH_KGDB /* Break into the debugger if a break is detected */ - BREAKPOINT(); + breakpoint(); #endif sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); @@ -971,7 +972,6 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, { struct sci_port *s = &sci_ports[port->line]; unsigned int status, baud, smr_val; - unsigned long flags; int t; baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); @@ -989,12 +989,10 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, #else t = SCBRR_VALUE(baud); #endif - } break; + } } - spin_lock_irqsave(&port->lock, flags); - do { status = sci_in(port, SCxSR); } while (!(status & SCxSR_TEND(port))); @@ -1038,8 +1036,6 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, if ((termios->c_cflag & CREAD) != 0) sci_start_rx(port,0); - - spin_unlock_irqrestore(&port->lock, flags); } static const char *sci_type(struct uart_port *port) @@ -1220,8 +1216,6 @@ static int __init serial_console_setup(struct console *co, char *options) if (!port->membase || !port->mapbase) return -ENODEV; - spin_lock_init(&port->lock); - port->type = serial_console_port->type; if (port->flags & UPF_IOREMAP) @@ -1247,7 +1241,7 @@ static struct console serial_console = { .device = uart_console_device, .write = serial_console_write, .setup = serial_console_setup, - .flags = CON_PRINTBUFFER, + .flags = CON_PRINTBUFFER, .index = -1, .data = &sci_uart_driver, }; @@ -1292,11 +1286,23 @@ int __init kgdb_console_setup(struct console *co, char *options) int parity = 'n'; int flow = 'n'; - spin_lock_init(&port->lock); - if (co->index != kgdb_portnum) co->index = kgdb_portnum; + kgdb_sci_port = &sci_ports[co->index]; + port = &kgdb_sci_port->port; + + /* + * Also need to check port->type, we don't actually have any + * UPIO_PORT ports, but uart_report_port() handily misreports + * it anyways if we don't have a port available by the time this is + * called. + */ + if (!port->type) + return -ENODEV; + if (!port->membase || !port->mapbase) + return -ENODEV; + if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else @@ -1311,11 +1317,12 @@ int __init kgdb_console_setup(struct console *co, char *options) #ifdef CONFIG_SH_KGDB_CONSOLE static struct console kgdb_console = { - .name = "ttySC", - .write = kgdb_console_write, - .setup = kgdb_console_setup, - .flags = CON_PRINTBUFFER | CON_ENABLED, - .index = -1, + .name = "ttySC", + .device = uart_console_device, + .write = kgdb_console_write, + .setup = kgdb_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, .data = &sci_uart_driver, }; @@ -1386,6 +1393,12 @@ static int __devinit sci_probe(struct platform_device *dev) uart_add_one_port(&sci_uart_driver, &sciport->port); } +#if defined(CONFIG_SH_KGDB) && !defined(CONFIG_SH_KGDB_CONSOLE) + kgdb_sci_port = &sci_ports[kgdb_portnum]; + kgdb_getchar = kgdb_sci_getchar; + kgdb_putchar = kgdb_sci_putchar; +#endif + #ifdef CONFIG_CPU_FREQ cpufreq_register_notifier(&sci_nb, CPUFREQ_TRANSITION_NOTIFIER); dev_info(&dev->dev, "sci: CPU frequency notifier registered\n"); -- cgit v1.1 From 32351a28a7e1f2c68afbe559dd35e1ad0301be6d Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 12 Mar 2007 14:38:59 +0900 Subject: sh: Add SH7785 Highlander board support (R7785RP). This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 20 ++++++++++++++++---- drivers/serial/sh-sci.h | 40 +++++++++++++++++++++++++++++++++++++--- 2 files changed, 53 insertions(+), 7 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 4b17f84..94deebd 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -62,7 +62,7 @@ struct sci_port { unsigned int type; /* Port IRQs: ERI, RXI, TXI, BRI (optional) */ - unsigned int irqs[SCIx_NR_IRQS]; + unsigned int irqs[SCIx_NR_IRQS]; /* Port pin configuration */ void (*init_pins)(struct uart_port *port, @@ -351,7 +351,7 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) } else { #ifdef CONFIG_CPU_SUBTYPE_SH7343 /* Nothing */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) +#elif defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) ctrl_outw(0x0080, SCSPTR0); /* Set RTS = 1 */ #else ctrl_outw(0x0080, SCSPTR2); /* Set RTS = 1 */ @@ -361,7 +361,9 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) } #endif -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) +#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) static inline int scif_txroom(struct uart_port *port) { return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0x7f); @@ -1368,9 +1370,19 @@ static int __devinit sci_probe(struct platform_device *dev) struct plat_sci_port *p = dev->dev.platform_data; int i; - for (i = 0; p && p->flags != 0 && i < SCI_NPORTS; p++, i++) { + for (i = 0; p && p->flags != 0; p++, i++) { struct sci_port *sciport = &sci_ports[i]; + /* Sanity check */ + if (unlikely(i == SCI_NPORTS)) { + dev_notice(&dev->dev, "Attempting to register port " + "%d when only %d are available.\n", + i+1, SCI_NPORTS); + dev_notice(&dev->dev, "Consider bumping " + "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); + break; + } + sciport->port.mapbase = p->mapbase; /* diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 77f7d63..854153a 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -140,6 +140,16 @@ # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) +# define SCSPTR0 0xffea0024 /* 16 bit SCIF */ +# define SCSPTR1 0xffeb0024 /* 16 bit SCIF */ +# define SCSPTR2 0xffec0024 /* 16 bit SCIF */ +# define SCSPTR3 0xffed0024 /* 16 bit SCIF */ +# define SCSPTR4 0xffee0024 /* 16 bit SCIF */ +# define SCSPTR5 0xffef0024 /* 16 bit SCIF */ +# define SCIF_OPER 0x0001 /* Overrun error bit */ +# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7206) # define SCSPTR0 0xfffe8020 /* 16 bit SCIF */ # define SCSPTR1 0xfffe8820 /* 16 bit SCIF */ @@ -163,7 +173,10 @@ #define SCI_CTRL_FLAGS_RIE 0x40 /* all */ #define SCI_CTRL_FLAGS_TE 0x20 /* all */ #define SCI_CTRL_FLAGS_RE 0x10 /* all */ -#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7780) +#if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ + defined(CONFIG_CPU_SUBTYPE_SH7751) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) #define SCI_CTRL_FLAGS_REIE 0x08 /* 7750 SCIF */ #else #define SCI_CTRL_FLAGS_REIE 0 @@ -385,7 +398,9 @@ SCIx_FNS(SCxTDR, 0x06, 8, 0x0c, 8, 0x06, 8, 0x0C, 8, 0x03, 8) SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) -#if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) +#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) @@ -576,6 +591,23 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ return 1; } +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) +static inline int sci_rxd_in(struct uart_port *port) +{ + if (port->mapbase == 0xffea0000) + return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffeb0000) + return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffec0000) + return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffed0000) + return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffee0000) + return ctrl_inw(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffef0000) + return ctrl_inw(SCSPTR5) & 0x0001 ? 1 : 0; /* SCIF */ + return 1; +} #elif defined(CONFIG_CPU_SUBTYPE_SH7206) static inline int sci_rxd_in(struct uart_port *port) { @@ -634,7 +666,9 @@ static inline int sci_rxd_in(struct uart_port *port) * -- Mitch Davis - 15 Jul 2000 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7780) +#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) #define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1) -- cgit v1.1 From 8248daac6b9cde7748a659dcabea6584d62a9fd8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 14 Mar 2007 14:23:22 +0900 Subject: serial: sh-sci: Kill off breakpoint in break IRQ. With the GDB stub being entered via a special sysrq trigger, we don't want to hit it directly from sci_br_interrupt(). Without this, there is access to the other sysrq triggers when kgdb is enabled. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 94deebd..8f38721 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -738,12 +738,6 @@ static irqreturn_t sci_br_interrupt(int irq, void *ptr) /* Handle BREAKs */ sci_handle_breaks(port); - -#ifdef CONFIG_SH_KGDB - /* Break into the debugger if a break is detected */ - breakpoint(); -#endif - sci_out(port, SCxSR, SCxSR_BREAK_CLEAR(port)); return IRQ_HANDLED; -- cgit v1.1 From 9465a54fa4a9da628091c372baa84120f8304587 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 27 Mar 2007 18:13:51 +0900 Subject: sh: MS7712SE01 board support. Support the SH7712 (SH3-DSP) Solution Engine reference board. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 13 ++++++++++++- drivers/serial/sh-sci.h | 43 ++++++++++++++++++++++++++++++++----------- 2 files changed, 44 insertions(+), 12 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 8f38721..0a34fa9 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -284,12 +284,23 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag) #endif #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF) -#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710) +#if defined(CONFIG_CPU_SUBTYPE_SH7300) /* SH7300 doesn't use RTS/CTS */ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) { sci_out(port, SCFCR, 0); } +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag) +{ + unsigned int fcr_val = 0; + + set_sh771x_scif_pfc(port); + if (cflag & CRTSCTS) { + fcr_val |= SCFCR_MCE; + } + sci_out(port, SCFCR, fcr_val); +} #elif defined(CONFIG_CPU_SH3) /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 854153a..fb04fb5 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -73,9 +73,13 @@ # define SCPDR 0xA4050136 /* 16 bit SCIF */ # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ # define SCIF_ONLY -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) # define SCSPTR0 0xA4400000 /* 16 bit SCIF */ -# define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ +# define SCI_NPORTS 2 +# define SCIF_ORER 0x0001 /* overrun error bit */ +# define PACR 0xa4050100 +# define PBCR 0xa4050102 +# define SCSCR_INIT(port) 0x3B # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH73180) # define SCPDR 0xA4050138 /* 16 bit SCIF */ @@ -346,9 +350,15 @@ } #ifdef CONFIG_CPU_SH3 -#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \ - defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) +#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \ + sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \ + h8_sci_offset, h8_sci_size) \ + CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size) +#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \ + CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) +#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \ + defined(CONFIG_CPU_SUBTYPE_SH7705) #define SCIF_FNS(name, scif_offset, scif_size) \ CPU_SCIF_FNS(name, scif_offset, scif_size) #else @@ -375,8 +385,8 @@ #endif #if defined(CONFIG_CPU_SUBTYPE_SH7300) || \ - defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) + defined(CONFIG_CPU_SUBTYPE_SH7705) + SCIF_FNS(SCSMR, 0x00, 16) SCIF_FNS(SCBRR, 0x04, 8) SCIF_FNS(SCSCR, 0x08, 16) @@ -486,13 +496,24 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */ return 1; } -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) +#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) static inline int sci_rxd_in(struct uart_port *port) { - if (port->mapbase == SCSPTR0) - return ctrl_inw(SCSPTR0 + 0x10) & 0x01 ? 1 : 0; - return 1; + return sci_in(port,SCxSR)&0x0010 ? 1 : 0; +} +static inline void set_sh771x_scif_pfc(struct uart_port *port) +{ + if (port->mapbase == 0xA4400000){ + ctrl_outw(ctrl_inw(PACR)&0xffc0,PACR); + ctrl_outw(ctrl_inw(PBCR)&0x0fff,PBCR); + return; + } + if (port->mapbase == 0xA4410000){ + ctrl_outw(ctrl_inw(PBCR)&0xf003,PBCR); + return; + } } + #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH4_202) -- cgit v1.1 From 1534a3b3dc1cbab006f0add253be1b095d738b82 Mon Sep 17 00:00:00 2001 From: dmitry pervushin Date: Tue, 24 Apr 2007 13:41:12 +0900 Subject: serial: sh-sci: Fix module clock refcounting. This adds the enable/disable hooks for the port clock to sh-sci. Signed-off-by: dmitry pervushin Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 0a34fa9..e5cf57f 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -77,6 +77,9 @@ struct sci_port { /* Break timer */ struct timer_list break_timer; int break_flag; + + /* Port clock */ + struct clk *clk; }; #ifdef CONFIG_SH_KGDB @@ -955,6 +958,8 @@ static int sci_startup(struct uart_port *port) if (s->enable) s->enable(port); + s->clk = clk_get(NULL, "module_clk"); + sci_request_irq(s); sci_start_tx(port); sci_start_rx(port, 1); @@ -972,6 +977,9 @@ static void sci_shutdown(struct uart_port *port) if (s->disable) s->disable(port); + + clk_put(s->clk); + s->clk = NULL; } static void sci_set_termios(struct uart_port *port, struct ktermios *termios, @@ -990,9 +998,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, default: { #if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) - struct clk *clk = clk_get(NULL, "module_clk"); - t = SCBRR_VALUE(baud, clk_get_rate(clk)); - clk_put(clk); + t = SCBRR_VALUE(baud, clk_get_rate(s->clk)); #else t = SCBRR_VALUE(baud); #endif -- cgit v1.1 From 005a336e71e9e3ea356f9afca5d66318d6901319 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 26 Apr 2007 11:45:32 +0900 Subject: serial: sh-sci: Fix module clock refcount for serial console. Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/serial') diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index e5cf57f..1f89496 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -78,8 +78,10 @@ struct sci_port { struct timer_list break_timer; int break_flag; +#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) /* Port clock */ struct clk *clk; +#endif }; #ifdef CONFIG_SH_KGDB @@ -958,7 +960,9 @@ static int sci_startup(struct uart_port *port) if (s->enable) s->enable(port); +#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) s->clk = clk_get(NULL, "module_clk"); +#endif sci_request_irq(s); sci_start_tx(port); @@ -978,8 +982,10 @@ static void sci_shutdown(struct uart_port *port) if (s->disable) s->disable(port); +#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) clk_put(s->clk); s->clk = NULL; +#endif } static void sci_set_termios(struct uart_port *port, struct ktermios *termios, @@ -1231,6 +1237,11 @@ static int __init serial_console_setup(struct console *co, char *options) port->type = serial_console_port->type; +#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64) + if (!serial_console_port->clk) + serial_console_port->clk = clk_get(NULL, "module_clk"); +#endif + if (port->flags & UPF_IOREMAP) sci_config_port(port, 0); -- cgit v1.1