From 1708d242d222e751a0922e3c56ef857cf60bbedd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 29 Jun 2006 15:14:03 -0700 Subject: [SERIAL] sunsu: Convert to of_driver framework. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 491 ++++++++++++++++--------------------------------- 1 file changed, 157 insertions(+), 334 deletions(-) (limited to 'drivers/serial/sunsu.c') diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 6e28c25..4ef47c8 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -40,11 +40,8 @@ #include #include -#include -#include -#ifdef CONFIG_SPARC64 -#include -#endif +#include +#include #if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ @@ -94,10 +91,10 @@ struct uart_sunsu_port { /* Probing information. */ enum su_type su_type; unsigned int type_probed; /* XXX Stupid */ - int port_node; + unsigned long reg_size; #ifdef CONFIG_SERIO - struct serio *serio; + struct serio serio; int serio_open; #endif }; @@ -509,7 +506,7 @@ static void receive_kbd_ms_chars(struct uart_sunsu_port *up, struct pt_regs *reg /* Stop-A is handled by drivers/char/keyboard.c now. */ if (up->su_type == SU_PORT_KBD) { #ifdef CONFIG_SERIO - serio_interrupt(up->serio, ch, 0, regs); + serio_interrupt(&up->serio, ch, 0, regs); #endif } else if (up->su_type == SU_PORT_MS) { int ret = suncore_mouse_baud_detection(ch, is_break); @@ -523,7 +520,7 @@ static void receive_kbd_ms_chars(struct uart_sunsu_port *up, struct pt_regs *reg case 0: #ifdef CONFIG_SERIO - serio_interrupt(up->serio, ch, 0, regs); + serio_interrupt(&up->serio, ch, 0, regs); #endif break; }; @@ -1031,99 +1028,14 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up) { unsigned char status1, status2, scratch, scratch2, scratch3; unsigned char save_lcr, save_mcr; - struct linux_ebus_device *dev = NULL; - struct linux_ebus *ebus; -#ifdef CONFIG_SPARC64 - struct sparc_isa_bridge *isa_br; - struct sparc_isa_device *isa_dev; -#endif -#ifndef CONFIG_SPARC64 - struct linux_prom_registers reg0; -#endif unsigned long flags; - if (!up->port_node || !up->su_type) + if (up->su_type == SU_PORT_NONE) return; up->type_probed = PORT_UNKNOWN; up->port.iotype = UPIO_MEM; - /* - * First we look for Ebus-bases su's - */ - for_each_ebus(ebus) { - for_each_ebusdev(dev, ebus) { - if (dev->prom_node->node == up->port_node) { - /* - * The EBus is broken on sparc; it delivers - * virtual addresses in resources. Oh well... - * This is correct on sparc64, though. - */ - up->port.membase = (char *) dev->resource[0].start; - /* - * This is correct on both architectures. - */ - up->port.mapbase = dev->resource[0].start; - up->port.irq = dev->irqs[0]; - goto ebus_done; - } - } - } - -#ifdef CONFIG_SPARC64 - for_each_isa(isa_br) { - for_each_isadev(isa_dev, isa_br) { - if (isa_dev->prom_node->node == up->port_node) { - /* Same on sparc64. Cool architecure... */ - up->port.membase = (char *) isa_dev->resource.start; - up->port.mapbase = isa_dev->resource.start; - up->port.irq = isa_dev->irq; - goto ebus_done; - } - } - } -#endif - -#ifdef CONFIG_SPARC64 - /* - * Not on Ebus, bailing. - */ - return; -#else - /* - * Not on Ebus, must be OBIO. - */ - if (prom_getproperty(up->port_node, "reg", - (char *)®0, sizeof(reg0)) == -1) { - prom_printf("sunsu: no \"reg\" property\n"); - return; - } - prom_apply_obio_ranges(®0, 1); - if (reg0.which_io != 0) { /* Just in case... */ - prom_printf("sunsu: bus number nonzero: 0x%x:%x\n", - reg0.which_io, reg0.phys_addr); - return; - } - up->port.mapbase = reg0.phys_addr; - if ((up->port.membase = ioremap(reg0.phys_addr, reg0.reg_size)) == 0) { - prom_printf("sunsu: Cannot map registers.\n"); - return; - } - - /* - * 0x20 is sun4m thing, Dave Redman heritage. - * See arch/sparc/kernel/irq.c. - */ -#define IRQ_4M(n) ((n)|0x20) - - /* - * There is no intr property on MrCoffee, so hardwire it. - */ - up->port.irq = IRQ_4M(13); -#endif - -ebus_done: - spin_lock_irqsave(&up->port.lock, flags); if (!(up->port.flags & UPF_BUGGY_UART)) { @@ -1269,18 +1181,13 @@ static struct uart_driver sunsu_reg = { .major = TTY_MAJOR, }; -static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel) +static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up) { int quot, baud; #ifdef CONFIG_SERIO struct serio *serio; #endif - spin_lock_init(&up->port.lock); - up->port.line = channel; - up->port.type = PORT_UNKNOWN; - up->port.uartclk = (SU_BASE_BAUD * 16); - if (up->su_type == SU_PORT_KBD) { up->cflag = B1200 | CS8 | CLOCAL | CREAD; baud = 1200; @@ -1292,41 +1199,31 @@ static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up, int channel) sunsu_autoconfig(up); if (up->port.type == PORT_UNKNOWN) - return -1; - - printk(KERN_INFO "su%d at 0x%p (irq = %d) is a %s\n", - channel, - up->port.membase, up->port.irq, - sunsu_type(&up->port)); + return -ENODEV; #ifdef CONFIG_SERIO - up->serio = serio = kmalloc(sizeof(struct serio), GFP_KERNEL); - if (serio) { - memset(serio, 0, sizeof(*serio)); - - serio->port_data = up; - - serio->id.type = SERIO_RS232; - if (up->su_type == SU_PORT_KBD) { - serio->id.proto = SERIO_SUNKBD; - strlcpy(serio->name, "sukbd", sizeof(serio->name)); - } else { - serio->id.proto = SERIO_SUN; - serio->id.extra = 1; - strlcpy(serio->name, "sums", sizeof(serio->name)); - } - strlcpy(serio->phys, (channel == 0 ? "su/serio0" : "su/serio1"), - sizeof(serio->phys)); + serio = &up->serio; + serio->port_data = up; - serio->write = sunsu_serio_write; - serio->open = sunsu_serio_open; - serio->close = sunsu_serio_close; - - serio_register_port(serio); + serio->id.type = SERIO_RS232; + if (up->su_type == SU_PORT_KBD) { + serio->id.proto = SERIO_SUNKBD; + strlcpy(serio->name, "sukbd", sizeof(serio->name)); } else { - printk(KERN_WARNING "su%d: not enough memory for serio port\n", - channel); + serio->id.proto = SERIO_SUN; + serio->id.extra = 1; + strlcpy(serio->name, "sums", sizeof(serio->name)); } + strlcpy(serio->phys, + (!(up->port.line & 1) ? "su/serio0" : "su/serio1"), + sizeof(serio->phys)); + + serio->write = sunsu_serio_write; + serio->open = sunsu_serio_open; + serio->close = sunsu_serio_close; + serio->dev.parent = up->port.dev; + + serio_register_port(serio); #endif sunsu_change_speed(&up->port, up->cflag, 0, quot); @@ -1458,22 +1355,20 @@ static struct console sunsu_cons = { * Register console. */ -static inline struct console *SUNSU_CONSOLE(void) +static inline struct console *SUNSU_CONSOLE(int num_uart) { int i; if (con_is_present()) return NULL; - for (i = 0; i < UART_NR; i++) { + for (i = 0; i < num_uart; i++) { int this_minor = sunsu_reg.minor + i; if ((this_minor - 64) == (serial_console - 1)) break; } - if (i == UART_NR) - return NULL; - if (sunsu_ports[i].port_node == 0) + if (i == num_uart) return NULL; sunsu_cons.index = i; @@ -1481,252 +1376,180 @@ static inline struct console *SUNSU_CONSOLE(void) return &sunsu_cons; } #else -#define SUNSU_CONSOLE() (NULL) +#define SUNSU_CONSOLE(num_uart) (NULL) #define sunsu_serial_console_init() do { } while (0) #endif -static int __init sunsu_serial_init(void) +static enum su_type __devinit su_get_type(struct device_node *dp) { - int instance, ret, i; - - /* How many instances do we need? */ - instance = 0; - for (i = 0; i < UART_NR; i++) { - struct uart_sunsu_port *up = &sunsu_ports[i]; + struct device_node *ap = of_find_node_by_path("/aliases"); - if (up->su_type == SU_PORT_MS || - up->su_type == SU_PORT_KBD) - continue; + if (ap) { + char *keyb = of_get_property(ap, "keyboard", NULL); + char *ms = of_get_property(ap, "mouse", NULL); - spin_lock_init(&up->port.lock); - up->port.flags |= UPF_BOOT_AUTOCONF; - up->port.type = PORT_UNKNOWN; - up->port.uartclk = (SU_BASE_BAUD * 16); + if (keyb) { + if (dp == of_find_node_by_path(keyb)) + return SU_PORT_KBD; + } + if (ms) { + if (dp == of_find_node_by_path(ms)) + return SU_PORT_MS; + } + } - sunsu_autoconfig(up); - if (up->port.type == PORT_UNKNOWN) - continue; + return SU_PORT_PORT; +} - up->port.line = instance++; - up->port.ops = &sunsu_pops; - } +static int __devinit su_probe(struct of_device *op, const struct of_device_id *match) +{ + static int inst; + struct device_node *dp = op->node; + struct uart_sunsu_port *up; + struct resource *rp; + int err; - sunsu_reg.minor = sunserial_current_minor; + if (inst >= UART_NR) + return -EINVAL; - sunsu_reg.nr = instance; + up = &sunsu_ports[inst]; + up->port.line = inst; - ret = uart_register_driver(&sunsu_reg); - if (ret < 0) - return ret; + spin_lock_init(&up->port.lock); - sunsu_reg.tty_driver->name_base = sunsu_reg.minor - 64; + up->su_type = su_get_type(dp); - sunserial_current_minor += instance; + rp = &op->resource[0]; + up->port.mapbase = op->resource[0].start; - sunsu_reg.cons = SUNSU_CONSOLE(); + up->reg_size = (rp->end - rp->start) + 1; + up->port.membase = of_ioremap(rp, 0, up->reg_size, "su"); + if (!up->port.membase) + return -ENOMEM; - for (i = 0; i < UART_NR; i++) { - struct uart_sunsu_port *up = &sunsu_ports[i]; + up->port.irq = op->irqs[0]; - /* Do not register Keyboard/Mouse lines with UART - * layer. - */ - if (up->su_type == SU_PORT_MS || - up->su_type == SU_PORT_KBD) - continue; + up->port.dev = &op->dev; - if (up->port.type == PORT_UNKNOWN) - continue; + up->port.type = PORT_UNKNOWN; + up->port.uartclk = (SU_BASE_BAUD * 16); - uart_add_one_port(&sunsu_reg, &up->port); + err = 0; + if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) { + err = sunsu_kbd_ms_init(up); + if (err) + goto out_unmap; } - return 0; -} + up->port.flags |= UPF_BOOT_AUTOCONF; -static int su_node_ok(int node, char *name, int namelen) -{ - if (strncmp(name, "su", namelen) == 0 || - strncmp(name, "su_pnp", namelen) == 0) - return 1; - - if (strncmp(name, "serial", namelen) == 0) { - char compat[32]; - int clen; - - /* Is it _really_ a 'su' device? */ - clen = prom_getproperty(node, "compatible", compat, sizeof(compat)); - if (clen > 0) { - if (strncmp(compat, "sab82532", 8) == 0) { - /* Nope, Siemens serial, not for us. */ - return 0; - } - } - return 1; - } + sunsu_autoconfig(up); - return 0; -} + err = -ENODEV; + if (up->port.type == PORT_UNKNOWN) + goto out_unmap; -#define SU_PROPSIZE 128 + up->port.ops = &sunsu_pops; -/* - * Scan status structure. - * "prop" is a local variable but it eats stack to keep it in each - * stack frame of a recursive procedure. - */ -struct su_probe_scan { - int msnode, kbnode; /* PROM nodes for mouse and keyboard */ - int msx, kbx; /* minors for mouse and keyboard */ - int devices; /* scan index */ - char prop[SU_PROPSIZE]; -}; + err = uart_add_one_port(&sunsu_reg, &up->port); + if (err) + goto out_unmap; -/* - * We have several platforms which present 'su' in different parts - * of the device tree. 'su' may be found under obio, ebus, isa and pci. - * We walk over the tree and find them wherever PROM hides them. - */ -static void __init su_probe_any(struct su_probe_scan *t, int sunode) -{ - struct uart_sunsu_port *up; - int len; + dev_set_drvdata(&op->dev, up); - if (t->devices >= UART_NR) - return; + inst++; - for (; sunode != 0; sunode = prom_getsibling(sunode)) { - len = prom_getproperty(sunode, "name", t->prop, SU_PROPSIZE); - if (len <= 1) - continue; /* Broken PROM node */ - - if (su_node_ok(sunode, t->prop, len)) { - up = &sunsu_ports[t->devices]; - if (t->kbnode != 0 && sunode == t->kbnode) { - t->kbx = t->devices; - up->su_type = SU_PORT_KBD; - } else if (t->msnode != 0 && sunode == t->msnode) { - t->msx = t->devices; - up->su_type = SU_PORT_MS; - } else { -#ifdef CONFIG_SPARC64 - /* - * Do not attempt to use the truncated - * keyboard/mouse ports as serial ports - * on Ultras with PC keyboard attached. - */ - if (prom_getbool(sunode, "mouse")) - continue; - if (prom_getbool(sunode, "keyboard")) - continue; -#endif - up->su_type = SU_PORT_PORT; - } - up->port_node = sunode; - ++t->devices; - } else { - su_probe_any(t, prom_getchild(sunode)); - } - } + return 0; + +out_unmap: + of_iounmap(up->port.membase, up->reg_size); + return err; } -static int __init sunsu_probe(void) +static int __devexit su_remove(struct of_device *dev) { - int node; - int len; - struct su_probe_scan scan; + struct uart_sunsu_port *up = dev_get_drvdata(&dev->dev);; - /* - * First, we scan the tree. - */ - scan.devices = 0; - scan.msx = -1; - scan.kbx = -1; - scan.kbnode = 0; - scan.msnode = 0; + if (up->su_type == SU_PORT_MS || + up->su_type == SU_PORT_KBD) { +#ifdef CONFIG_SERIO + serio_unregister_port(&up->serio); +#endif + } else if (up->port.type != PORT_UNKNOWN) + uart_remove_one_port(&sunsu_reg, &up->port); - /* - * Get the nodes for keyboard and mouse from 'aliases'... - */ - node = prom_getchild(prom_root_node); - node = prom_searchsiblings(node, "aliases"); - if (node != 0) { - len = prom_getproperty(node, "keyboard", scan.prop, SU_PROPSIZE); - if (len > 0) { - scan.prop[len] = 0; - scan.kbnode = prom_finddevice(scan.prop); - } + return 0; +} - len = prom_getproperty(node, "mouse", scan.prop, SU_PROPSIZE); - if (len > 0) { - scan.prop[len] = 0; - scan.msnode = prom_finddevice(scan.prop); - } - } +static struct of_device_id su_match[] = { + { + .name = "su", + }, + { + .name = "su_pnp", + }, + { + .name = "serial", + .compatible = "su", + }, + {}, +}; +MODULE_DEVICE_TABLE(of, su_match); - su_probe_any(&scan, prom_getchild(prom_root_node)); +static struct of_platform_driver su_driver = { + .name = "su", + .match_table = su_match, + .probe = su_probe, + .remove = __devexit_p(su_remove), +}; - /* - * Second, we process the special case of keyboard and mouse. - * - * Currently if we got keyboard and mouse hooked to "su" ports - * we do not use any possible remaining "su" as a serial port. - * Thus, we ignore values of .msx and .kbx, then compact ports. - */ - if (scan.msx != -1 && scan.kbx != -1) { - sunsu_ports[0].su_type = SU_PORT_MS; - sunsu_ports[0].port_node = scan.msnode; - sunsu_kbd_ms_init(&sunsu_ports[0], 0); +static int num_uart; - sunsu_ports[1].su_type = SU_PORT_KBD; - sunsu_ports[1].port_node = scan.kbnode; - sunsu_kbd_ms_init(&sunsu_ports[1], 1); +static int __init sunsu_init(void) +{ + struct device_node *dp; + int err; - return 0; + num_uart = 0; + for_each_node_by_name(dp, "su") { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; } - - if (scan.msx != -1 || scan.kbx != -1) { - printk("sunsu_probe: cannot match keyboard and mouse, confused\n"); - return -ENODEV; + for_each_node_by_name(dp, "su_pnp") { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + for_each_node_by_name(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } } - if (scan.devices == 0) - return -ENODEV; + if (num_uart) { + sunsu_reg.minor = sunserial_current_minor; + sunsu_reg.nr = num_uart; + err = uart_register_driver(&sunsu_reg); + if (err) + return err; + sunsu_reg.tty_driver->name_base = sunsu_reg.minor - 64; + sunserial_current_minor += num_uart; + sunsu_reg.cons = SUNSU_CONSOLE(num_uart); + } - /* - * Console must be initiated after the generic initialization. - */ - sunsu_serial_init(); + err = of_register_driver(&su_driver, &of_bus_type); + if (err && num_uart) + uart_unregister_driver(&sunsu_reg); - return 0; + return err; } static void __exit sunsu_exit(void) { - int i, saw_uart; - - saw_uart = 0; - for (i = 0; i < UART_NR; i++) { - struct uart_sunsu_port *up = &sunsu_ports[i]; - - if (up->su_type == SU_PORT_MS || - up->su_type == SU_PORT_KBD) { -#ifdef CONFIG_SERIO - if (up->serio) { - serio_unregister_port(up->serio); - up->serio = NULL; - } -#endif - } else if (up->port.type != PORT_UNKNOWN) { - uart_remove_one_port(&sunsu_reg, &up->port); - saw_uart++; - } - } - - if (saw_uart) + if (num_uart) uart_unregister_driver(&sunsu_reg); } -module_init(sunsu_probe); +module_init(sunsu_init); module_exit(sunsu_exit); MODULE_LICENSE("GPL"); -- cgit v1.1