From 145d01e4287b8cbf50f87c3283e33bf5c84e8468 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 21 Jun 2005 17:15:52 -0700 Subject: [PATCH] ppc64 iSeries: allow build with no PCI This patch allows iSeries to build with CONFIG_PCI=n. This is useful for partitions that have only virtual I/O. Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/serial/Kconfig') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 6e44b46..6a15703 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -753,7 +753,7 @@ config SERIAL_MPC52xx_CONSOLE_BAUD config SERIAL_ICOM tristate "IBM Multiport Serial Adapter" - depends on PPC_ISERIES || PPC_PSERIES + depends on PCI && (PPC_ISERIES || PPC_PSERIES) select SERIAL_CORE help This driver is for a family of multiport serial adapters -- cgit v1.1 From e5d310b349b2cbcc0dab31139c92201f332695bb Mon Sep 17 00:00:00 2001 From: Brent Casavant Date: Tue, 21 Jun 2005 17:16:01 -0700 Subject: [PATCH] ioc4: CONFIG split The SGI IOC4 I/O controller chip drivers are currently all configured by CONFIG_BLK_DEV_SGIIOC4. This is undesirable as not all IOC4 hardware features are needed by all systems. This patch adds two configuration variables, CONFIG_SGI_IOC4 for core IOC4 driver support (see patch 1/3 in this series for further explanation) and CONFIG_SERIAL_SGI_IOC4 to independently enable serial port support. Signed-off-by: Brent Casavant Acked-by: Pat Gefre Acked-by: Jeremy Higdon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/serial/Kconfig') diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 6a15703..25fcef2 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -843,4 +843,13 @@ config SERIAL_JSM To compile this driver as a module, choose M here: the module will be called jsm. +config SERIAL_SGI_IOC4 + tristate "SGI IOC4 controller serial support" + depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4 + select SERIAL_CORE + help + If you have an SGI Altix with an IOC4 based Base IO card + and wish to use the serial ports on this card, say Y. + Otherwise, say N. + endmenu -- cgit v1.1