From 4ba5e35daa90871fcb9b01f5ad1e5723343cc0a9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 23 Jun 2005 10:43:04 +0100 Subject: [PATCH] Serial: Convert 8250 revision-based bug fixes to bug bitmask For some 8250 port types, we used to check the type of the port, and then determine whether the chip revision means the device is buggy. Instead, introduce a bit array, and set the appropriate bit(s) when we discover a buggy device. Signed-off-by: Russell King --- drivers/serial/8250.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) (limited to 'drivers/serial/8250.c') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 30e8beb..27cc288 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -132,9 +132,9 @@ struct uart_8250_port { struct uart_port port; struct timer_list timer; /* "no irq" timer */ struct list_head list; /* ports on this IRQ */ - unsigned int capabilities; /* port capabilities */ + unsigned short capabilities; /* port capabilities */ + unsigned short bugs; /* port bugs */ unsigned int tx_loadsz; /* transmit fifo load size */ - unsigned short rev; unsigned char acr; unsigned char ier; unsigned char lcr; @@ -560,7 +560,14 @@ static void autoconfig_has_efr(struct uart_8250_port *up) if (id1 == 0x16 && id2 == 0xC9 && (id3 == 0x50 || id3 == 0x52 || id3 == 0x54)) { up->port.type = PORT_16C950; - up->rev = rev | (id3 << 8); + + /* + * Enable work around for the Oxford Semiconductor 952 rev B + * chip which causes it to seriously miscalculate baud rates + * when DLL is 0. + */ + if (id3 == 0x52 && rev == 0x01) + up->bugs |= UART_BUG_QUOT; return; } @@ -577,8 +584,6 @@ static void autoconfig_has_efr(struct uart_8250_port *up) id2 = id1 >> 8; if (id2 == 0x10 || id2 == 0x12 || id2 == 0x14) { - if (id2 == 0x10) - up->rev = id1 & 255; up->port.type = PORT_16850; return; } @@ -809,6 +814,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) // save_flags(flags); cli(); up->capabilities = 0; + up->bugs = 0; if (!(up->port.flags & UPF_BUGGY_UART)) { /* @@ -1677,12 +1683,9 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios, quot = serial8250_get_divisor(port, baud); /* - * Work around a bug in the Oxford Semiconductor 952 rev B - * chip which causes it to seriously miscalculate baud rates - * when DLL is 0. + * Oxford Semi 952 rev B workaround */ - if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 && - up->rev == 0x5201) + if (up->bugs & UART_BUG_QUOT && (quot & 0xff) == 0) quot ++; if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) { -- cgit v1.1