From f3506b755f730f199aea3289712f9604ae562319 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 22 Jul 2010 20:40:10 +0900
Subject: [SCSI] 53c700: remove dma_is_consistent usage

This driver is the only user of dma_is_consistent(). We plan to remove
this API.

The driver uses the API in the following way:

BUG_ON(!dma_is_consistent(hostdata->dev, pScript) && L1_CACHE_BYTES < dma_get_cache_alignment());

The above code tries to see if L1_CACHE_BYTES is greater than
dma_get_cache_alignment() on sysmtes that can not allocate coherent
memory (some old systems can't).

James Bottomley exmplained that this is necesary because the driver
packs the set of mailboxes into a single coherent area and separates
the different usages by a L1 cache stride. So it's fatal if the dma
coherence stride is greater than the L1 cache size.

He also pointed out that we can kill this checking because we don't
hit this BUG_ON on all architectures that actually use the driver.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/53c700.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 80dc3ac..89fc1c8 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -309,9 +309,6 @@ NCR_700_detect(struct scsi_host_template *tpnt,
 	hostdata->msgin = memory + MSGIN_OFFSET;
 	hostdata->msgout = memory + MSGOUT_OFFSET;
 	hostdata->status = memory + STATUS_OFFSET;
-	/* all of these offsets are L1_CACHE_BYTES separated.  It is fatal
-	 * if this isn't sufficient separation to avoid dma flushing issues */
-	BUG_ON(!dma_is_consistent(hostdata->dev, pScript) && L1_CACHE_BYTES < dma_get_cache_alignment());
 	hostdata->slots = (struct NCR_700_command_slot *)(memory + SLOTS_OFFSET);
 	hostdata->dev = dev;
 
-- 
cgit v1.1


From c7acc5b8f9a0e6cb17d313ebfbc5d392aa837ac7 Mon Sep 17 00:00:00 2001
From: Jayamohan Kallickal <jayamohank@serverengines.com>
Date: Thu, 22 Jul 2010 04:29:18 +0530
Subject: [SCSI] be2iscsi: Add support for iscsi boot

This patch contains changes for adding support for iscsi_boot.
Have modified to make read of mac address from chip as a function.

  The mac_address is being cached after teh first call as it is
not expected to change

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/be2iscsi/be_cmds.h  | 147 +++++++++++++++---
 drivers/scsi/be2iscsi/be_iscsi.c |  76 ++++++----
 drivers/scsi/be2iscsi/be_iscsi.h |   2 +
 drivers/scsi/be2iscsi/be_main.c  | 311 +++++++++++++++++++++++++++++++++++++++
 drivers/scsi/be2iscsi/be_main.h  |   3 +
 drivers/scsi/be2iscsi/be_mgmt.c  |  71 +++++++++
 6 files changed, 564 insertions(+), 46 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 40641d0..5218de4 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -162,6 +162,13 @@ struct be_mcc_mailbox {
 #define OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES		2
 #define OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES        3
 #define OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG		7
+#define OPCODE_COMMON_ISCSI_NTWK_SET_VLAN		14
+#define OPCODE_COMMON_ISCSI_NTWK_CONFIGURE_STATELESS_IP_ADDR	17
+#define OPCODE_COMMON_ISCSI_NTWK_MODIFY_IP_ADDR		21
+#define OPCODE_COMMON_ISCSI_NTWK_GET_DEFAULT_GATEWAY	22
+#define OPCODE_COMMON_ISCSI_NTWK_MODIFY_DEFAULT_GATEWAY 23
+#define OPCODE_COMMON_ISCSI_NTWK_GET_ALL_IF_ID		24
+#define OPCODE_COMMON_ISCSI_NTWK_GET_IF_INFO		25
 #define OPCODE_COMMON_ISCSI_SET_FRAGNUM_BITS_FOR_SGL_CRA 61
 #define OPCODE_COMMON_ISCSI_DEFQ_CREATE                 64
 #define OPCODE_COMMON_ISCSI_DEFQ_DESTROY		65
@@ -237,11 +244,109 @@ struct be_cmd_resp_eq_create {
 	u16 rsvd0;		/* sword */
 } __packed;
 
+struct mgmt_chap_format {
+	u32 flags;
+	u8  intr_chap_name[256];
+	u8  intr_secret[16];
+	u8  target_chap_name[256];
+	u8  target_secret[16];
+	u16 intr_chap_name_length;
+	u16 intr_secret_length;
+	u16 target_chap_name_length;
+	u16 target_secret_length;
+} __packed;
+
+struct mgmt_auth_method_format {
+	u8	auth_method_type;
+	u8	padding[3];
+	struct	mgmt_chap_format chap;
+} __packed;
+
+struct mgmt_conn_login_options {
+	u8 flags;
+	u8 header_digest;
+	u8 data_digest;
+	u8 rsvd0;
+	u32 max_recv_datasegment_len_ini;
+	u32 max_recv_datasegment_len_tgt;
+	u32 tcp_mss;
+	u32 tcp_window_size;
+	struct	mgmt_auth_method_format auth_data;
+} __packed;
+
+struct ip_address_format {
+	u16 size_of_structure;
+	u8 reserved;
+	u8 ip_type;
+	u8 ip_address[16];
+	u32 rsvd0;
+} __packed;
+
+struct	mgmt_conn_info {
+	u32	connection_handle;
+	u32	connection_status;
+	u16	src_port;
+	u16	dest_port;
+	u16	dest_port_redirected;
+	u16	cid;
+	u32	estimated_throughput;
+	struct	ip_address_format	src_ipaddr;
+	struct	ip_address_format	dest_ipaddr;
+	struct	ip_address_format	dest_ipaddr_redirected;
+	struct	mgmt_conn_login_options	negotiated_login_options;
+} __packed;
+
+struct mgmt_session_login_options {
+	u8	flags;
+	u8	error_recovery_level;
+	u16	rsvd0;
+	u32	first_burst_length;
+	u32	max_burst_length;
+	u16	max_connections;
+	u16	max_outstanding_r2t;
+	u16	default_time2wait;
+	u16	default_time2retain;
+} __packed;
+
+struct mgmt_session_info {
+	u32	session_handle;
+	u32	status;
+	u8	isid[6];
+	u16	tsih;
+	u32	session_flags;
+	u16	conn_count;
+	u16	pad;
+	u8	target_name[224];
+	u8	initiator_iscsiname[224];
+	struct	mgmt_session_login_options negotiated_login_options;
+	struct	mgmt_conn_info	conn_list[1];
+} __packed;
+
+struct  be_cmd_req_get_session {
+	struct be_cmd_req_hdr hdr;
+	u32 session_handle;
+} __packed;
+
+struct  be_cmd_resp_get_session {
+	struct be_cmd_resp_hdr hdr;
+	struct mgmt_session_info session_info;
+} __packed;
+
 struct mac_addr {
 	u16 size_of_struct;
 	u8 addr[ETH_ALEN];
 } __packed;
 
+struct be_cmd_req_get_boot_target {
+	struct be_cmd_req_hdr hdr;
+} __packed;
+
+struct be_cmd_resp_get_boot_target {
+	struct be_cmd_resp_hdr hdr;
+	u32  boot_session_count;
+	int  boot_session_handle;
+};
+
 struct be_cmd_req_mac_query {
 	struct be_cmd_req_hdr hdr;
 	u8 type;
@@ -426,6 +531,11 @@ int be_poll_mcc(struct be_ctrl_info *ctrl);
 int mgmt_check_supported_fw(struct be_ctrl_info *ctrl,
 				      struct beiscsi_hba *phba);
 unsigned int be_cmd_get_mac_addr(struct beiscsi_hba *phba);
+unsigned int beiscsi_get_boot_target(struct beiscsi_hba *phba);
+unsigned int beiscsi_get_session_info(struct beiscsi_hba *phba,
+				  u32 boot_session_handle,
+				  struct be_dma_mem *nonemb_cmd);
+
 void free_mcc_tag(struct be_ctrl_info *ctrl, unsigned int tag);
 /*ISCSI Functuions */
 int be_cmd_fw_initialize(struct be_ctrl_info *ctrl);
@@ -601,14 +711,6 @@ struct be_eq_delay_params_in {
 	struct eq_delay delay[8];
 } __packed;
 
-struct ip_address_format {
-	u16 size_of_structure;
-	u8 reserved;
-	u8 ip_type;
-	u8 ip_address[16];
-	u32 rsvd0;
-} __packed;
-
 struct tcp_connect_and_offload_in {
 	struct be_cmd_req_hdr hdr;
 	struct ip_address_format ip_address;
@@ -688,18 +790,29 @@ struct be_fw_cfg {
 	u32 function_caps;
 } __packed;
 
-#define CMD_ISCSI_COMMAND_INVALIDATE  1
-#define ISCSI_OPCODE_SCSI_DATA_OUT      5
+struct be_all_if_id {
+	struct be_cmd_req_hdr hdr;
+	u32 if_count;
+	u32 if_hndl_list[1];
+} __packed;
+
+#define ISCSI_OPCODE_SCSI_DATA_OUT		5
+#define OPCODE_COMMON_MODIFY_EQ_DELAY		41
+#define OPCODE_COMMON_ISCSI_CLEANUP		59
+#define	OPCODE_COMMON_TCP_UPLOAD		56
 #define OPCODE_COMMON_ISCSI_TCP_CONNECT_AND_OFFLOAD 70
-#define OPCODE_ISCSI_INI_DRIVER_OFFLOAD_SESSION 41
-#define OPCODE_COMMON_MODIFY_EQ_DELAY	41
-#define OPCODE_COMMON_ISCSI_CLEANUP	59
-#define	OPCODE_COMMON_TCP_UPLOAD	56
 #define OPCODE_COMMON_ISCSI_ERROR_RECOVERY_INVALIDATE_COMMANDS 1
-/* --- CMD_ISCSI_INVALIDATE_CONNECTION_TYPE --- */
-#define CMD_ISCSI_CONNECTION_INVALIDATE 0x8001
-#define CMD_ISCSI_CONNECTION_ISSUE_TCP_RST 0x8002
+#define OPCODE_ISCSI_INI_CFG_GET_HBA_NAME	6
+#define OPCODE_ISCSI_INI_CFG_SET_HBA_NAME	7
+#define OPCODE_ISCSI_INI_SESSION_GET_A_SESSION  14
+#define OPCODE_ISCSI_INI_DRIVER_OFFLOAD_SESSION 41
 #define OPCODE_ISCSI_INI_DRIVER_INVALIDATE_CONNECTION 42
+#define OPCODE_ISCSI_INI_BOOT_GET_BOOT_TARGET	52
+
+/* --- CMD_ISCSI_INVALIDATE_CONNECTION_TYPE --- */
+#define CMD_ISCSI_COMMAND_INVALIDATE		1
+#define CMD_ISCSI_CONNECTION_INVALIDATE		0x8001
+#define CMD_ISCSI_CONNECTION_ISSUE_TCP_RST	0x8002
 
 #define INI_WR_CMD			1	/* Initiator write command */
 #define INI_TMF_CMD			2	/* Initiator TMF command */
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 6d63e7b..7d4d227 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -300,40 +300,16 @@ int beiscsi_get_host_param(struct Scsi_Host *shost,
 			   enum iscsi_host_param param, char *buf)
 {
 	struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
-	struct be_cmd_resp_get_mac_addr *resp;
-	struct be_mcc_wrb *wrb;
-	unsigned int tag, wrb_num;
 	int len = 0;
-	unsigned short status, extd_status;
-	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+	int status;
 
 	SE_DEBUG(DBG_LVL_8, "In beiscsi_get_host_param, param= %d\n", param);
 	switch (param) {
 	case ISCSI_HOST_PARAM_HWADDRESS:
-		tag = be_cmd_get_mac_addr(phba);
-		if (!tag) {
-			SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed\n");
-			return -EAGAIN;
-		} else
-			wait_event_interruptible(phba->ctrl.mcc_wait[tag],
-						 phba->ctrl.mcc_numtag[tag]);
-
-		wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
-		extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
-		status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
-		if (status || extd_status) {
-			SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed"
-					    " status = %d extd_status = %d\n",
-					    status, extd_status);
-			free_mcc_tag(&phba->ctrl, tag);
-			return -EAGAIN;
-		} else {
-			wrb = queue_get_wrb(mccq, wrb_num);
-			free_mcc_tag(&phba->ctrl, tag);
-			resp = embedded_payload(wrb);
-			memcpy(phba->mac_address, resp->mac_address, ETH_ALEN);
-			len = sysfs_format_mac(buf, phba->mac_address,
-					       ETH_ALEN);
+		status = beiscsi_get_macaddr(buf, phba);
+		if (status < 0) {
+			SE_DEBUG(DBG_LVL_1, "beiscsi_get_macaddr Failed\n");
+			return status;
 		}
 		break;
 	default:
@@ -342,6 +318,48 @@ int beiscsi_get_host_param(struct Scsi_Host *shost,
 	return len;
 }
 
+int beiscsi_get_macaddr(char *buf, struct beiscsi_hba *phba)
+{
+	struct be_cmd_resp_get_mac_addr *resp;
+	struct be_mcc_wrb *wrb;
+	unsigned int tag, wrb_num;
+	unsigned short status, extd_status;
+	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+	int rc;
+
+	if (phba->read_mac_address)
+		return sysfs_format_mac(buf, phba->mac_address,
+					ETH_ALEN);
+
+	tag = be_cmd_get_mac_addr(phba);
+	if (!tag) {
+		SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed\n");
+		return -EBUSY;
+	} else
+		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+					 phba->ctrl.mcc_numtag[tag]);
+
+	wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
+	extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
+	status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+	if (status || extd_status) {
+		SE_DEBUG(DBG_LVL_1, "Failed to get be_cmd_get_mac_addr"
+				    " status = %d extd_status = %d\n",
+				    status, extd_status);
+		free_mcc_tag(&phba->ctrl, tag);
+		return -EAGAIN;
+	}
+	wrb = queue_get_wrb(mccq, wrb_num);
+	free_mcc_tag(&phba->ctrl, tag);
+	resp = embedded_payload(wrb);
+	memcpy(phba->mac_address, resp->mac_address, ETH_ALEN);
+	rc = sysfs_format_mac(buf, phba->mac_address,
+			       ETH_ALEN);
+	phba->read_mac_address = 1;
+	return rc;
+}
+
+
 /**
  * beiscsi_conn_get_stats - get the iscsi stats
  * @cls_conn: pointer to iscsi cls conn
diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h
index 870cdb2..8950a70 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.h
+++ b/drivers/scsi/be2iscsi/be_iscsi.h
@@ -54,6 +54,8 @@ int beiscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
 int beiscsi_get_host_param(struct Scsi_Host *shost,
 			   enum iscsi_host_param param, char *buf);
 
+int beiscsi_get_macaddr(char *buf, struct beiscsi_hba *phba);
+
 int beiscsi_set_param(struct iscsi_cls_conn *cls_conn,
 		      enum iscsi_param param, char *buf, int buflen);
 
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 7436c5a..8220bde 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -26,6 +26,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/semaphore.h>
+#include <linux/iscsi_boot_sysfs.h>
 
 #include <scsi/libiscsi.h>
 #include <scsi/scsi_transport_iscsi.h>
@@ -211,6 +212,218 @@ unlock:
 	return rc;
 }
 
+static ssize_t beiscsi_show_boot_tgt_info(void *data, int type, char *buf)
+{
+	struct beiscsi_hba *phba = data;
+	char *str = buf;
+	int rc;
+
+	switch (type) {
+	case ISCSI_BOOT_TGT_NAME:
+		rc = sprintf(buf, "%.*s\n",
+				(int)strlen(phba->boot_sess.target_name),
+				(char *)&phba->boot_sess.target_name);
+		break;
+	case ISCSI_BOOT_TGT_IP_ADDR:
+		if (phba->boot_sess.conn_list[0].dest_ipaddr.ip_type == 0x1)
+			rc = sprintf(buf, "%pI4\n",
+				(char *)&phba->boot_sess.conn_list[0].
+				dest_ipaddr.ip_address);
+		else
+			rc = sprintf(str, "%pI6\n",
+				(char *)&phba->boot_sess.conn_list[0].
+				dest_ipaddr.ip_address);
+		break;
+	case ISCSI_BOOT_TGT_PORT:
+		rc = sprintf(str, "%d\n", phba->boot_sess.conn_list[0].
+				  dest_port);
+		break;
+
+	case ISCSI_BOOT_TGT_CHAP_NAME:
+		rc = sprintf(str,  "%.*s\n",
+				      phba->boot_sess.conn_list[0].
+				      negotiated_login_options.auth_data.chap.
+				      target_chap_name_length,
+				      (char *)&phba->boot_sess.conn_list[0].
+				      negotiated_login_options.auth_data.chap.
+				      target_chap_name);
+		break;
+	case ISCSI_BOOT_TGT_CHAP_SECRET:
+		rc = sprintf(str,  "%.*s\n",
+				      phba->boot_sess.conn_list[0].
+				      negotiated_login_options.auth_data.chap.
+				      target_secret_length,
+				      (char *)&phba->boot_sess.conn_list[0].
+				      negotiated_login_options.auth_data.chap.
+				      target_secret);
+
+		break;
+	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+		rc = sprintf(str,  "%.*s\n",
+				      phba->boot_sess.conn_list[0].
+				      negotiated_login_options.auth_data.chap.
+				      intr_chap_name_length,
+				      (char *)&phba->boot_sess.conn_list[0].
+				      negotiated_login_options.auth_data.chap.
+				      intr_chap_name);
+
+		break;
+	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+			rc = sprintf(str,  "%.*s\n",
+				      phba->boot_sess.conn_list[0].
+				      negotiated_login_options.auth_data.chap.
+				      intr_secret_length,
+				      (char *)&phba->boot_sess.conn_list[0].
+				      negotiated_login_options.auth_data.chap.
+				      intr_secret);
+		break;
+	case ISCSI_BOOT_TGT_FLAGS:
+			rc = sprintf(str, "2\n");
+		break;
+	case ISCSI_BOOT_TGT_NIC_ASSOC:
+			rc = sprintf(str, "0\n");
+		break;
+	default:
+		rc = -ENOSYS;
+		break;
+	}
+	return rc;
+}
+
+static ssize_t beiscsi_show_boot_ini_info(void *data, int type, char *buf)
+{
+	struct beiscsi_hba *phba = data;
+	char *str = buf;
+	int rc;
+
+	switch (type) {
+	case ISCSI_BOOT_INI_INITIATOR_NAME:
+		rc = sprintf(str, "%s\n", phba->boot_sess.initiator_iscsiname);
+		break;
+	default:
+		rc = -ENOSYS;
+		break;
+	}
+	return rc;
+}
+
+static ssize_t beiscsi_show_boot_eth_info(void *data, int type, char *buf)
+{
+	struct beiscsi_hba *phba = data;
+	char *str = buf;
+	int rc;
+
+	switch (type) {
+	case ISCSI_BOOT_ETH_FLAGS:
+			rc = sprintf(str, "2\n");
+		break;
+	case ISCSI_BOOT_ETH_INDEX:
+			rc = sprintf(str, "0\n");
+		break;
+	case ISCSI_BOOT_ETH_MAC:
+		rc  = beiscsi_get_macaddr(buf, phba);
+		if (rc < 0) {
+			SE_DEBUG(DBG_LVL_1, "beiscsi_get_macaddr Failed\n");
+			return rc;
+		}
+	break;
+	default:
+		rc = -ENOSYS;
+		break;
+	}
+	return rc;
+}
+
+
+static mode_t beiscsi_tgt_get_attr_visibility(void *data, int type)
+{
+	int rc;
+
+	switch (type) {
+	case ISCSI_BOOT_TGT_NAME:
+	case ISCSI_BOOT_TGT_IP_ADDR:
+	case ISCSI_BOOT_TGT_PORT:
+	case ISCSI_BOOT_TGT_CHAP_NAME:
+	case ISCSI_BOOT_TGT_CHAP_SECRET:
+	case ISCSI_BOOT_TGT_REV_CHAP_NAME:
+	case ISCSI_BOOT_TGT_REV_CHAP_SECRET:
+	case ISCSI_BOOT_TGT_NIC_ASSOC:
+	case ISCSI_BOOT_TGT_FLAGS:
+		rc = S_IRUGO;
+		break;
+	default:
+		rc = 0;
+		break;
+	}
+	return rc;
+}
+
+static mode_t beiscsi_ini_get_attr_visibility(void *data, int type)
+{
+	int rc;
+
+	switch (type) {
+	case ISCSI_BOOT_INI_INITIATOR_NAME:
+		rc = S_IRUGO;
+		break;
+	default:
+		rc = 0;
+		break;
+	}
+	return rc;
+}
+
+
+static mode_t beiscsi_eth_get_attr_visibility(void *data, int type)
+{
+	int rc;
+
+	switch (type) {
+	case ISCSI_BOOT_ETH_FLAGS:
+	case ISCSI_BOOT_ETH_MAC:
+	case ISCSI_BOOT_ETH_INDEX:
+		rc = S_IRUGO;
+		break;
+	default:
+		rc = 0;
+		break;
+	}
+	return rc;
+}
+
+static int beiscsi_setup_boot_info(struct beiscsi_hba *phba)
+{
+	struct iscsi_boot_kobj *boot_kobj;
+
+	phba->boot_kset = iscsi_boot_create_host_kset(phba->shost->host_no);
+	if (!phba->boot_kset)
+		return -ENOMEM;
+
+	/* get boot info using mgmt cmd */
+	boot_kobj = iscsi_boot_create_target(phba->boot_kset, 0, phba,
+					     beiscsi_show_boot_tgt_info,
+					     beiscsi_tgt_get_attr_visibility);
+	if (!boot_kobj)
+		goto free_kset;
+
+	boot_kobj = iscsi_boot_create_initiator(phba->boot_kset, 0, phba,
+					     beiscsi_show_boot_ini_info,
+					     beiscsi_ini_get_attr_visibility);
+	if (!boot_kobj)
+		goto free_kset;
+
+	boot_kobj = iscsi_boot_create_ethernet(phba->boot_kset, 0, phba,
+					     beiscsi_show_boot_eth_info,
+					     beiscsi_eth_get_attr_visibility);
+	if (!boot_kobj)
+		goto free_kset;
+	return 0;
+
+free_kset:
+	iscsi_boot_destroy_kset(phba->boot_kset);
+	return -ENOMEM;
+}
+
 /*------------------- PCI Driver operations and data ----------------- */
 static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = {
 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
@@ -268,6 +481,15 @@ static struct beiscsi_hba *beiscsi_hba_alloc(struct pci_dev *pcidev)
 
 	if (iscsi_host_add(shost, &phba->pcidev->dev))
 		goto free_devices;
+
+	if (beiscsi_setup_boot_info(phba))
+		/*
+		 * log error but continue, because we may not be using
+		 * iscsi boot.
+		 */
+		shost_printk(KERN_ERR, phba->shost, "Could not set up "
+		"iSCSI boot info.");
+
 	return phba;
 
 free_devices:
@@ -3279,6 +3501,89 @@ static void hwi_disable_intr(struct beiscsi_hba *phba)
 			     "In hwi_disable_intr, Already Disabled\n");
 }
 
+static int beiscsi_get_boot_info(struct beiscsi_hba *phba)
+{
+	struct be_cmd_resp_get_boot_target *boot_resp;
+	struct be_cmd_resp_get_session *session_resp;
+	struct be_mcc_wrb *wrb;
+	struct be_dma_mem nonemb_cmd;
+	unsigned int tag, wrb_num;
+	unsigned short status, extd_status;
+	struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
+
+	tag = beiscsi_get_boot_target(phba);
+	if (!tag) {
+		SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed\n");
+		return -EAGAIN;
+	} else
+		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+					 phba->ctrl.mcc_numtag[tag]);
+
+	wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
+	extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
+	status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+	if (status || extd_status) {
+		SE_DEBUG(DBG_LVL_1, "be_cmd_get_mac_addr Failed"
+				    " status = %d extd_status = %d\n",
+				    status, extd_status);
+		free_mcc_tag(&phba->ctrl, tag);
+		return -EBUSY;
+	}
+	wrb = queue_get_wrb(mccq, wrb_num);
+	free_mcc_tag(&phba->ctrl, tag);
+	boot_resp = embedded_payload(wrb);
+
+	if (boot_resp->boot_session_handle < 0) {
+		printk(KERN_ERR "No Boot Session for this pci_func,"
+			"session Hndl = %d\n", boot_resp->boot_session_handle);
+		return -ENXIO;
+	}
+
+	nonemb_cmd.va = pci_alloc_consistent(phba->ctrl.pdev,
+				sizeof(*session_resp),
+				&nonemb_cmd.dma);
+	if (nonemb_cmd.va == NULL) {
+		SE_DEBUG(DBG_LVL_1,
+			 "Failed to allocate memory for"
+			 "beiscsi_get_session_info\n");
+		return -ENOMEM;
+	}
+
+	memset(nonemb_cmd.va, 0, sizeof(*session_resp));
+	tag = beiscsi_get_session_info(phba,
+		boot_resp->boot_session_handle, &nonemb_cmd);
+	if (!tag) {
+		SE_DEBUG(DBG_LVL_1, "beiscsi_get_session_info"
+			" Failed\n");
+		goto boot_freemem;
+	} else
+		wait_event_interruptible(phba->ctrl.mcc_wait[tag],
+					 phba->ctrl.mcc_numtag[tag]);
+
+	wrb_num = (phba->ctrl.mcc_numtag[tag] & 0x00FF0000) >> 16;
+	extd_status = (phba->ctrl.mcc_numtag[tag] & 0x0000FF00) >> 8;
+	status = phba->ctrl.mcc_numtag[tag] & 0x000000FF;
+	if (status || extd_status) {
+		SE_DEBUG(DBG_LVL_1, "beiscsi_get_session_info Failed"
+				    " status = %d extd_status = %d\n",
+				    status, extd_status);
+		free_mcc_tag(&phba->ctrl, tag);
+		goto boot_freemem;
+	}
+	wrb = queue_get_wrb(mccq, wrb_num);
+	free_mcc_tag(&phba->ctrl, tag);
+	session_resp = nonemb_cmd.va ;
+	memcpy(&phba->boot_sess, &session_resp->session_info,
+	       sizeof(struct mgmt_session_info));
+	pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
+		    nonemb_cmd.va, nonemb_cmd.dma);
+	return 0;
+boot_freemem:
+	pci_free_consistent(phba->ctrl.pdev, nonemb_cmd.size,
+		    nonemb_cmd.va, nonemb_cmd.dma);
+	return -ENOMEM;
+}
+
 static int beiscsi_init_port(struct beiscsi_hba *phba)
 {
 	int ret;
@@ -3841,6 +4146,7 @@ static void beiscsi_remove(struct pci_dev *pcidev)
 	iscsi_host_remove(phba->shost);
 	pci_dev_put(phba->pcidev);
 	iscsi_host_free(phba->shost);
+	iscsi_boot_destroy_kset(phba->boot_kset);
 }
 
 static void beiscsi_msix_enable(struct beiscsi_hba *phba)
@@ -3996,6 +4302,11 @@ static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
 		goto free_blkenbld;
 	}
 	hwi_enable_intr(phba);
+	ret = beiscsi_get_boot_info(phba);
+	if (ret < 0) {
+		shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+			     "No Boot Devices !!!!!\n");
+	}
 	SE_DEBUG(DBG_LVL_8, "\n\n\n SUCCESS - DRIVER LOADED\n\n\n");
 	return 0;
 
diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index c643bb3..48b7d4d 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -312,6 +312,7 @@ struct beiscsi_hba {
 	struct list_head hba_queue;
 	unsigned short *cid_array;
 	struct iscsi_endpoint **ep_array;
+	struct iscsi_boot_kset *boot_kset;
 	struct Scsi_Host *shost;
 	struct {
 		/**
@@ -342,6 +343,8 @@ struct beiscsi_hba {
 	struct work_struct work_cqs;	/* The work being queued */
 	struct be_ctrl_info ctrl;
 	unsigned int generation;
+	unsigned int read_mac_address;
+	struct mgmt_session_info boot_sess;
 	struct invalidate_command_table inv_tbl[128];
 
 };
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 3f3fab9..26350e4 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -20,6 +20,77 @@
 
 #include "be_mgmt.h"
 #include "be_iscsi.h"
+#include <scsi/scsi_transport_iscsi.h>
+
+unsigned int beiscsi_get_boot_target(struct beiscsi_hba *phba)
+{
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_get_mac_addr *req;
+	unsigned int tag = 0;
+
+	SE_DEBUG(DBG_LVL_8, "In bescsi_get_boot_target\n");
+	spin_lock(&ctrl->mbox_lock);
+	tag = alloc_mcc_tag(phba);
+	if (!tag) {
+		spin_unlock(&ctrl->mbox_lock);
+		return tag;
+	}
+
+	wrb = wrb_from_mccq(phba);
+	req = embedded_payload(wrb);
+	wrb->tag0 |= tag;
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI_INI,
+			   OPCODE_ISCSI_INI_BOOT_GET_BOOT_TARGET,
+			   sizeof(*req));
+
+	be_mcc_notify(phba);
+	spin_unlock(&ctrl->mbox_lock);
+	return tag;
+}
+
+unsigned int beiscsi_get_session_info(struct beiscsi_hba *phba,
+				  u32 boot_session_handle,
+				  struct be_dma_mem *nonemb_cmd)
+{
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct be_mcc_wrb *wrb;
+	unsigned int tag = 0;
+	struct  be_cmd_req_get_session *req;
+	struct be_cmd_resp_get_session *resp;
+	struct be_sge *sge;
+
+	SE_DEBUG(DBG_LVL_8, "In beiscsi_get_session_info\n");
+	spin_lock(&ctrl->mbox_lock);
+	tag = alloc_mcc_tag(phba);
+	if (!tag) {
+		spin_unlock(&ctrl->mbox_lock);
+		return tag;
+	}
+
+	nonemb_cmd->size = sizeof(*resp);
+	req = nonemb_cmd->va;
+	memset(req, 0, sizeof(*req));
+	wrb = wrb_from_mccq(phba);
+	sge = nonembedded_sgl(wrb);
+	wrb->tag0 |= tag;
+
+
+	wrb->tag0 |= tag;
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI_INI,
+			   OPCODE_ISCSI_INI_SESSION_GET_A_SESSION,
+			   sizeof(*resp));
+	req->session_handle = boot_session_handle;
+	sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd->dma));
+	sge->pa_lo = cpu_to_le32(nonemb_cmd->dma & 0xFFFFFFFF);
+	sge->len = cpu_to_le32(nonemb_cmd->size);
+
+	be_mcc_notify(phba);
+	spin_unlock(&ctrl->mbox_lock);
+	return tag;
+}
 
 int mgmt_get_fw_config(struct be_ctrl_info *ctrl,
 				struct beiscsi_hba *phba)
-- 
cgit v1.1


From e919dee8a398fea1db184ce1418e70170a01c8fa Mon Sep 17 00:00:00 2001
From: Jayamohan Kallickal <jayamohank@serverengines.com>
Date: Thu, 22 Jul 2010 04:30:32 +0530
Subject: [SCSI] be2iscsi: Increase max sector

This patch increases the max_sectors to 2048

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/be2iscsi/be_main.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 48b7d4d..6cfa55d 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -63,7 +63,7 @@
 #define BEISCSI_SGLIST_ELEMENTS	30
 
 #define BEISCSI_CMD_PER_LUN	128	/* scsi_host->cmd_per_lun */
-#define BEISCSI_MAX_SECTORS	256	/* scsi_host->max_sectors */
+#define BEISCSI_MAX_SECTORS	2048	/* scsi_host->max_sectors */
 
 #define BEISCSI_MAX_CMD_LEN	16	/* scsi_host->max_cmd_len */
 #define BEISCSI_NUM_MAX_LUN	256	/* scsi_host->max_lun */
-- 
cgit v1.1


From dd81beaee9a8bf000f7fbfe609b5a0fc9607e233 Mon Sep 17 00:00:00 2001
From: Jayamohan Kallickal <jayamohank@serverengines.com>
Date: Thu, 22 Jul 2010 04:31:07 +0530
Subject: [SCSI] be2iscsi: Driver Version change to 2.0.549.0

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/be2iscsi/be_main.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/be2iscsi/be_main.h b/drivers/scsi/be2iscsi/be_main.h
index 6cfa55d..90eb74f 100644
--- a/drivers/scsi/be2iscsi/be_main.h
+++ b/drivers/scsi/be2iscsi/be_main.h
@@ -35,7 +35,7 @@
 
 #include "be.h"
 #define DRV_NAME		"be2iscsi"
-#define BUILD_STR		"2.0.527.0"
+#define BUILD_STR		"2.0.549.0"
 #define BE_NAME			"ServerEngines BladeEngine2" \
 				"Linux iSCSI Driver version" BUILD_STR
 #define DRV_DESC		BE_NAME " " "Driver"
-- 
cgit v1.1


From 787f0bd3376aedb3f9ba9bbf862d85e4b176f9b0 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 29 Jul 2010 10:16:09 -0700
Subject: [SCSI] be2iscsi: select ISCSI_BOOT_SYSFS

be2iscsi uses iscsi_boot_*() interfaces, so it should ensure that
ISCSI_BOOT_SYSFS is enabled.

ERROR: "iscsi_boot_create_target" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_create_ethernet" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_create_host_kset" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_create_initiator" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!
ERROR: "iscsi_boot_destroy_kset" [drivers/scsi/be2iscsi/be2iscsi.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/be2iscsi/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/be2iscsi/Kconfig b/drivers/scsi/be2iscsi/Kconfig
index 84c275f..ceaca32 100644
--- a/drivers/scsi/be2iscsi/Kconfig
+++ b/drivers/scsi/be2iscsi/Kconfig
@@ -2,6 +2,7 @@ config BE2ISCSI
 	tristate "ServerEngines' 10Gbps iSCSI - BladeEngine 2"
 	depends on PCI && SCSI && NET
 	select SCSI_ISCSI_ATTRS
+	select ISCSI_BOOT_SYSFS
 
 	help
 	This driver implements the iSCSI functionality for ServerEngines'
-- 
cgit v1.1


From aab7a8fd19d0c2f7fcac4d07616899655e326dfe Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 2 Aug 2010 12:46:12 -0500
Subject: [SCSI] iscsi boot: mv iscsi_boot_sysfs to drivers/scsi

iscsi_boot_sysfs does not depend on firmware. Any iscsi driver
can use it. This patch moves iscsi_boot_sysfs to the scsi
dir, so that it can be used on any arch with any driver.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Acked-by: Konrad Rzeszutek Wilk <konrad@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/Kconfig            |   8 +
 drivers/scsi/Makefile           |   1 +
 drivers/scsi/iscsi_boot_sysfs.c | 481 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 490 insertions(+)
 create mode 100644 drivers/scsi/iscsi_boot_sysfs.c

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 158284f..a479b3b 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -370,6 +370,14 @@ config ISCSI_TCP
 
 	 http://open-iscsi.org
 
+config ISCSI_BOOT_SYSFS
+	tristate "iSCSI Boot Sysfs Interface"
+	default	n
+	help
+	  This option enables support for exposing iSCSI boot information
+	  via sysfs to userspace. If you wish to export this information,
+	  say Y. Otherwise, say N.
+
 source "drivers/scsi/cxgb3i/Kconfig"
 source "drivers/scsi/bnx2i/Kconfig"
 source "drivers/scsi/be2iscsi/Kconfig"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 2a3fca2..2703c6e 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_FCOE)		+= fcoe/
 obj-$(CONFIG_FCOE_FNIC)		+= fnic/
 obj-$(CONFIG_ISCSI_TCP) 	+= libiscsi.o	libiscsi_tcp.o iscsi_tcp.o
 obj-$(CONFIG_INFINIBAND_ISER) 	+= libiscsi.o
+obj-$(CONFIG_ISCSI_BOOT_SYSFS)	+= iscsi_boot_sysfs.o
 obj-$(CONFIG_SCSI_A4000T)	+= 53c700.o	a4000t.o
 obj-$(CONFIG_SCSI_ZORRO7XX)	+= 53c700.o	zorro7xx.o
 obj-$(CONFIG_A3000_SCSI)	+= a3000.o	wd33c93.o
diff --git a/drivers/scsi/iscsi_boot_sysfs.c b/drivers/scsi/iscsi_boot_sysfs.c
new file mode 100644
index 0000000..df6bff7
--- /dev/null
+++ b/drivers/scsi/iscsi_boot_sysfs.c
@@ -0,0 +1,481 @@
+/*
+ * Export the iSCSI boot info to userland via sysfs.
+ *
+ * Copyright (C) 2010 Red Hat, Inc.  All rights reserved.
+ * Copyright (C) 2010 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2.0 as published by
+ * the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/capability.h>
+#include <linux/iscsi_boot_sysfs.h>
+
+
+MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>");
+MODULE_DESCRIPTION("sysfs interface and helpers to export iSCSI boot information");
+MODULE_LICENSE("GPL");
+/*
+ * The kobject and attribute structures.
+ */
+struct iscsi_boot_attr {
+	struct attribute attr;
+	int type;
+	ssize_t (*show) (void *data, int type, char *buf);
+};
+
+/*
+ * The routine called for all sysfs attributes.
+ */
+static ssize_t iscsi_boot_show_attribute(struct kobject *kobj,
+					 struct attribute *attr, char *buf)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+	struct iscsi_boot_attr *boot_attr =
+			container_of(attr, struct iscsi_boot_attr, attr);
+	ssize_t ret = -EIO;
+	char *str = buf;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EACCES;
+
+	if (boot_kobj->show)
+		ret = boot_kobj->show(boot_kobj->data, boot_attr->type, str);
+	return ret;
+}
+
+static const struct sysfs_ops iscsi_boot_attr_ops = {
+	.show = iscsi_boot_show_attribute,
+};
+
+static void iscsi_boot_kobj_release(struct kobject *kobj)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+	kfree(boot_kobj->data);
+	kfree(boot_kobj);
+}
+
+static struct kobj_type iscsi_boot_ktype = {
+	.release = iscsi_boot_kobj_release,
+	.sysfs_ops = &iscsi_boot_attr_ops,
+};
+
+#define iscsi_boot_rd_attr(fnname, sysfs_name, attr_type)		\
+static struct iscsi_boot_attr iscsi_boot_attr_##fnname = {	\
+	.attr	= { .name = __stringify(sysfs_name), .mode = 0444 },	\
+	.type	= attr_type,						\
+}
+
+/* Target attrs */
+iscsi_boot_rd_attr(tgt_index, index, ISCSI_BOOT_TGT_INDEX);
+iscsi_boot_rd_attr(tgt_flags, flags, ISCSI_BOOT_TGT_FLAGS);
+iscsi_boot_rd_attr(tgt_ip, ip-addr, ISCSI_BOOT_TGT_IP_ADDR);
+iscsi_boot_rd_attr(tgt_port, port, ISCSI_BOOT_TGT_PORT);
+iscsi_boot_rd_attr(tgt_lun, lun, ISCSI_BOOT_TGT_LUN);
+iscsi_boot_rd_attr(tgt_chap, chap-type, ISCSI_BOOT_TGT_CHAP_TYPE);
+iscsi_boot_rd_attr(tgt_nic, nic-assoc, ISCSI_BOOT_TGT_NIC_ASSOC);
+iscsi_boot_rd_attr(tgt_name, target-name, ISCSI_BOOT_TGT_NAME);
+iscsi_boot_rd_attr(tgt_chap_name, chap-name, ISCSI_BOOT_TGT_CHAP_NAME);
+iscsi_boot_rd_attr(tgt_chap_secret, chap-secret, ISCSI_BOOT_TGT_CHAP_SECRET);
+iscsi_boot_rd_attr(tgt_chap_rev_name, rev-chap-name,
+		   ISCSI_BOOT_TGT_REV_CHAP_NAME);
+iscsi_boot_rd_attr(tgt_chap_rev_secret, rev-chap-name-secret,
+		   ISCSI_BOOT_TGT_REV_CHAP_SECRET);
+
+static struct attribute *target_attrs[] = {
+	&iscsi_boot_attr_tgt_index.attr,
+	&iscsi_boot_attr_tgt_flags.attr,
+	&iscsi_boot_attr_tgt_ip.attr,
+	&iscsi_boot_attr_tgt_port.attr,
+	&iscsi_boot_attr_tgt_lun.attr,
+	&iscsi_boot_attr_tgt_chap.attr,
+	&iscsi_boot_attr_tgt_nic.attr,
+	&iscsi_boot_attr_tgt_name.attr,
+	&iscsi_boot_attr_tgt_chap_name.attr,
+	&iscsi_boot_attr_tgt_chap_secret.attr,
+	&iscsi_boot_attr_tgt_chap_rev_name.attr,
+	&iscsi_boot_attr_tgt_chap_rev_secret.attr,
+	NULL
+};
+
+static mode_t iscsi_boot_tgt_attr_is_visible(struct kobject *kobj,
+					     struct attribute *attr, int i)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+	if (attr ==  &iscsi_boot_attr_tgt_index.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_INDEX);
+	else if (attr == &iscsi_boot_attr_tgt_flags.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_FLAGS);
+	else if (attr == &iscsi_boot_attr_tgt_ip.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					      ISCSI_BOOT_TGT_IP_ADDR);
+	else if (attr == &iscsi_boot_attr_tgt_port.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					      ISCSI_BOOT_TGT_PORT);
+	else if (attr == &iscsi_boot_attr_tgt_lun.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					      ISCSI_BOOT_TGT_LUN);
+	else if (attr == &iscsi_boot_attr_tgt_chap.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_CHAP_TYPE);
+	else if (attr == &iscsi_boot_attr_tgt_nic.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_NIC_ASSOC);
+	else if (attr == &iscsi_boot_attr_tgt_name.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_NAME);
+	else if (attr == &iscsi_boot_attr_tgt_chap_name.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_CHAP_NAME);
+	else if (attr == &iscsi_boot_attr_tgt_chap_secret.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_CHAP_SECRET);
+	else if (attr == &iscsi_boot_attr_tgt_chap_rev_name.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_REV_CHAP_NAME);
+	else if (attr == &iscsi_boot_attr_tgt_chap_rev_secret.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_TGT_REV_CHAP_SECRET);
+	return 0;
+}
+
+static struct attribute_group iscsi_boot_target_attr_group = {
+	.attrs = target_attrs,
+	.is_visible = iscsi_boot_tgt_attr_is_visible,
+};
+
+/* Ethernet attrs */
+iscsi_boot_rd_attr(eth_index, index, ISCSI_BOOT_ETH_INDEX);
+iscsi_boot_rd_attr(eth_flags, flags, ISCSI_BOOT_ETH_FLAGS);
+iscsi_boot_rd_attr(eth_ip, ip-addr, ISCSI_BOOT_ETH_IP_ADDR);
+iscsi_boot_rd_attr(eth_subnet, subnet-mask, ISCSI_BOOT_ETH_SUBNET_MASK);
+iscsi_boot_rd_attr(eth_origin, origin, ISCSI_BOOT_ETH_ORIGIN);
+iscsi_boot_rd_attr(eth_gateway, gateway, ISCSI_BOOT_ETH_GATEWAY);
+iscsi_boot_rd_attr(eth_primary_dns, primary-dns, ISCSI_BOOT_ETH_PRIMARY_DNS);
+iscsi_boot_rd_attr(eth_secondary_dns, secondary-dns,
+		   ISCSI_BOOT_ETH_SECONDARY_DNS);
+iscsi_boot_rd_attr(eth_dhcp, dhcp, ISCSI_BOOT_ETH_DHCP);
+iscsi_boot_rd_attr(eth_vlan, vlan, ISCSI_BOOT_ETH_VLAN);
+iscsi_boot_rd_attr(eth_mac, mac, ISCSI_BOOT_ETH_MAC);
+iscsi_boot_rd_attr(eth_hostname, hostname, ISCSI_BOOT_ETH_HOSTNAME);
+
+static struct attribute *ethernet_attrs[] = {
+	&iscsi_boot_attr_eth_index.attr,
+	&iscsi_boot_attr_eth_flags.attr,
+	&iscsi_boot_attr_eth_ip.attr,
+	&iscsi_boot_attr_eth_subnet.attr,
+	&iscsi_boot_attr_eth_origin.attr,
+	&iscsi_boot_attr_eth_gateway.attr,
+	&iscsi_boot_attr_eth_primary_dns.attr,
+	&iscsi_boot_attr_eth_secondary_dns.attr,
+	&iscsi_boot_attr_eth_dhcp.attr,
+	&iscsi_boot_attr_eth_vlan.attr,
+	&iscsi_boot_attr_eth_mac.attr,
+	&iscsi_boot_attr_eth_hostname.attr,
+	NULL
+};
+
+static mode_t iscsi_boot_eth_attr_is_visible(struct kobject *kobj,
+					     struct attribute *attr, int i)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+	if (attr ==  &iscsi_boot_attr_eth_index.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_INDEX);
+	else if (attr ==  &iscsi_boot_attr_eth_flags.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_FLAGS);
+	else if (attr ==  &iscsi_boot_attr_eth_ip.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_IP_ADDR);
+	else if (attr ==  &iscsi_boot_attr_eth_subnet.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_SUBNET_MASK);
+	else if (attr ==  &iscsi_boot_attr_eth_origin.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_ORIGIN);
+	else if (attr ==  &iscsi_boot_attr_eth_gateway.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_GATEWAY);
+	else if (attr ==  &iscsi_boot_attr_eth_primary_dns.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_PRIMARY_DNS);
+	else if (attr ==  &iscsi_boot_attr_eth_secondary_dns.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_SECONDARY_DNS);
+	else if (attr ==  &iscsi_boot_attr_eth_dhcp.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_DHCP);
+	else if (attr ==  &iscsi_boot_attr_eth_vlan.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_VLAN);
+	else if (attr ==  &iscsi_boot_attr_eth_mac.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_MAC);
+	else if (attr ==  &iscsi_boot_attr_eth_hostname.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_ETH_HOSTNAME);
+	return 0;
+}
+
+static struct attribute_group iscsi_boot_ethernet_attr_group = {
+	.attrs = ethernet_attrs,
+	.is_visible = iscsi_boot_eth_attr_is_visible,
+};
+
+/* Initiator attrs */
+iscsi_boot_rd_attr(ini_index, index, ISCSI_BOOT_INI_INDEX);
+iscsi_boot_rd_attr(ini_flags, flags, ISCSI_BOOT_INI_FLAGS);
+iscsi_boot_rd_attr(ini_isns, isns-server, ISCSI_BOOT_INI_ISNS_SERVER);
+iscsi_boot_rd_attr(ini_slp, slp-server, ISCSI_BOOT_INI_SLP_SERVER);
+iscsi_boot_rd_attr(ini_primary_radius, pri-radius-server,
+		   ISCSI_BOOT_INI_PRI_RADIUS_SERVER);
+iscsi_boot_rd_attr(ini_secondary_radius, sec-radius-server,
+		   ISCSI_BOOT_INI_SEC_RADIUS_SERVER);
+iscsi_boot_rd_attr(ini_name, initiator-name, ISCSI_BOOT_INI_INITIATOR_NAME);
+
+static struct attribute *initiator_attrs[] = {
+	&iscsi_boot_attr_ini_index.attr,
+	&iscsi_boot_attr_ini_flags.attr,
+	&iscsi_boot_attr_ini_isns.attr,
+	&iscsi_boot_attr_ini_slp.attr,
+	&iscsi_boot_attr_ini_primary_radius.attr,
+	&iscsi_boot_attr_ini_secondary_radius.attr,
+	&iscsi_boot_attr_ini_name.attr,
+	NULL
+};
+
+static mode_t iscsi_boot_ini_attr_is_visible(struct kobject *kobj,
+					     struct attribute *attr, int i)
+{
+	struct iscsi_boot_kobj *boot_kobj =
+			container_of(kobj, struct iscsi_boot_kobj, kobj);
+
+	if (attr ==  &iscsi_boot_attr_ini_index.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_INDEX);
+	if (attr ==  &iscsi_boot_attr_ini_flags.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_FLAGS);
+	if (attr ==  &iscsi_boot_attr_ini_isns.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_ISNS_SERVER);
+	if (attr ==  &iscsi_boot_attr_ini_slp.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_SLP_SERVER);
+	if (attr ==  &iscsi_boot_attr_ini_primary_radius.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_PRI_RADIUS_SERVER);
+	if (attr ==  &iscsi_boot_attr_ini_secondary_radius.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_SEC_RADIUS_SERVER);
+	if (attr ==  &iscsi_boot_attr_ini_name.attr)
+		return boot_kobj->is_visible(boot_kobj->data,
+					     ISCSI_BOOT_INI_INITIATOR_NAME);
+
+	return 0;
+}
+
+static struct attribute_group iscsi_boot_initiator_attr_group = {
+	.attrs = initiator_attrs,
+	.is_visible = iscsi_boot_ini_attr_is_visible,
+};
+
+static struct iscsi_boot_kobj *
+iscsi_boot_create_kobj(struct iscsi_boot_kset *boot_kset,
+		       struct attribute_group *attr_group,
+		       const char *name, int index, void *data,
+		       ssize_t (*show) (void *data, int type, char *buf),
+		       mode_t (*is_visible) (void *data, int type))
+{
+	struct iscsi_boot_kobj *boot_kobj;
+
+	boot_kobj = kzalloc(sizeof(*boot_kobj), GFP_KERNEL);
+	if (!boot_kobj)
+		return NULL;
+	INIT_LIST_HEAD(&boot_kobj->list);
+
+	boot_kobj->kobj.kset = boot_kset->kset;
+	if (kobject_init_and_add(&boot_kobj->kobj, &iscsi_boot_ktype,
+				 NULL, name, index)) {
+		kfree(boot_kobj);
+		return NULL;
+	}
+	boot_kobj->data = data;
+	boot_kobj->show = show;
+	boot_kobj->is_visible = is_visible;
+
+	if (sysfs_create_group(&boot_kobj->kobj, attr_group)) {
+		/*
+		 * We do not want to free this because the caller
+		 * will assume that since the creation call failed
+		 * the boot kobj was not setup and the normal release
+		 * path is not being run.
+		 */
+		boot_kobj->data = NULL;
+		kobject_put(&boot_kobj->kobj);
+		return NULL;
+	}
+	boot_kobj->attr_group = attr_group;
+
+	kobject_uevent(&boot_kobj->kobj, KOBJ_ADD);
+	/* Nothing broke so lets add it to the list. */
+	list_add_tail(&boot_kobj->list, &boot_kset->kobj_list);
+	return boot_kobj;
+}
+
+static void iscsi_boot_remove_kobj(struct iscsi_boot_kobj *boot_kobj)
+{
+	list_del(&boot_kobj->list);
+	sysfs_remove_group(&boot_kobj->kobj, boot_kobj->attr_group);
+	kobject_put(&boot_kobj->kobj);
+}
+
+/**
+ * iscsi_boot_create_target() - create boot target sysfs dir
+ * @boot_kset: boot kset
+ * @index: the target id
+ * @data: driver specific data for target
+ * @show: attr show function
+ * @is_visible: attr visibility function
+ *
+ * Note: The boot sysfs lib will free the data passed in for the caller
+ * when all refs to the target kobject have been released.
+ */
+struct iscsi_boot_kobj *
+iscsi_boot_create_target(struct iscsi_boot_kset *boot_kset, int index,
+			 void *data,
+			 ssize_t (*show) (void *data, int type, char *buf),
+			 mode_t (*is_visible) (void *data, int type))
+{
+	return iscsi_boot_create_kobj(boot_kset, &iscsi_boot_target_attr_group,
+				      "target%d", index, data, show, is_visible);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_target);
+
+/**
+ * iscsi_boot_create_initiator() - create boot initiator sysfs dir
+ * @boot_kset: boot kset
+ * @index: the initiator id
+ * @data: driver specific data
+ * @show: attr show function
+ * @is_visible: attr visibility function
+ *
+ * Note: The boot sysfs lib will free the data passed in for the caller
+ * when all refs to the initiator kobject have been released.
+ */
+struct iscsi_boot_kobj *
+iscsi_boot_create_initiator(struct iscsi_boot_kset *boot_kset, int index,
+			    void *data,
+			    ssize_t (*show) (void *data, int type, char *buf),
+			    mode_t (*is_visible) (void *data, int type))
+{
+	return iscsi_boot_create_kobj(boot_kset,
+				      &iscsi_boot_initiator_attr_group,
+				      "initiator", index, data, show,
+				      is_visible);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_initiator);
+
+/**
+ * iscsi_boot_create_ethernet() - create boot ethernet sysfs dir
+ * @boot_kset: boot kset
+ * @index: the ethernet device id
+ * @data: driver specific data
+ * @show: attr show function
+ * @is_visible: attr visibility function
+ *
+ * Note: The boot sysfs lib will free the data passed in for the caller
+ * when all refs to the ethernet kobject have been released.
+ */
+struct iscsi_boot_kobj *
+iscsi_boot_create_ethernet(struct iscsi_boot_kset *boot_kset, int index,
+			   void *data,
+			   ssize_t (*show) (void *data, int type, char *buf),
+			   mode_t (*is_visible) (void *data, int type))
+{
+	return iscsi_boot_create_kobj(boot_kset,
+				      &iscsi_boot_ethernet_attr_group,
+				      "ethernet%d", index, data, show,
+				      is_visible);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_ethernet);
+
+/**
+ * iscsi_boot_create_kset() - creates root sysfs tree
+ * @set_name: name of root dir
+ */
+struct iscsi_boot_kset *iscsi_boot_create_kset(const char *set_name)
+{
+	struct iscsi_boot_kset *boot_kset;
+
+	boot_kset = kzalloc(sizeof(*boot_kset), GFP_KERNEL);
+	if (!boot_kset)
+		return NULL;
+
+	boot_kset->kset = kset_create_and_add(set_name, NULL, firmware_kobj);
+	if (!boot_kset->kset) {
+		kfree(boot_kset);
+		return NULL;
+	}
+
+	INIT_LIST_HEAD(&boot_kset->kobj_list);
+	return boot_kset;
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_kset);
+
+/**
+ * iscsi_boot_create_host_kset() - creates root sysfs tree for a scsi host
+ * @hostno: host number of scsi host
+ */
+struct iscsi_boot_kset *iscsi_boot_create_host_kset(unsigned int hostno)
+{
+	struct iscsi_boot_kset *boot_kset;
+	char *set_name;
+
+	set_name = kasprintf(GFP_KERNEL, "iscsi_boot%u", hostno);
+	if (!set_name)
+		return NULL;
+
+	boot_kset = iscsi_boot_create_kset(set_name);
+	kfree(set_name);
+	return boot_kset;
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_create_host_kset);
+
+/**
+ * iscsi_boot_destroy_kset() - destroy kset and kobjects under it
+ * @boot_kset: boot kset
+ *
+ * This will remove the kset and kobjects and attrs under it.
+ */
+void iscsi_boot_destroy_kset(struct iscsi_boot_kset *boot_kset)
+{
+	struct iscsi_boot_kobj *boot_kobj, *tmp_kobj;
+
+	list_for_each_entry_safe(boot_kobj, tmp_kobj,
+				 &boot_kset->kobj_list, list)
+		iscsi_boot_remove_kobj(boot_kobj);
+
+	kset_unregister(boot_kset->kset);
+}
+EXPORT_SYMBOL_GPL(iscsi_boot_destroy_kset);
-- 
cgit v1.1


From 26845f585fad66dc23d87dad89d403cd64b48780 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Thu, 5 Aug 2010 13:17:10 -0400
Subject: [SCSI] remove fake "address-of" expression

Fake "address-of" expressions that evaluate to NULL generally confuse
readers and can provoke compiler warnings.  This patch (as1411)
removes one such fake expression introduced by:

commit db5bd1e0b505c54ff492172ce4abc245cf6cd639
Author: Alan Stern <stern@rowland.harvard.edu>
Date:   Thu Jun 17 10:36:49 2010 -0400

    [SCSI] convert to the new PM framework

using an "#ifdef" in its place.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/scsi_priv.h  | 2 --
 drivers/scsi/scsi_sysfs.c | 2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 026295e..b4056d1 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -148,8 +148,6 @@ static inline void scsi_netlink_exit(void) {}
 /* scsi_pm.c */
 #ifdef CONFIG_PM_OPS
 extern const struct dev_pm_ops scsi_bus_pm_ops;
-#else /* CONFIG_PM_OPS */
-#define scsi_bus_pm_ops		(*NULL)
 #endif
 #ifdef CONFIG_PM_RUNTIME
 extern void scsi_autopm_get_target(struct scsi_target *);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 562fb3b..c3f6737 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -381,7 +381,9 @@ struct bus_type scsi_bus_type = {
         .name		= "scsi",
         .match		= scsi_bus_match,
 	.uevent		= scsi_bus_uevent,
+#ifdef CONFIG_PM_OPS
 	.pm		= &scsi_bus_pm_ops,
+#endif
 };
 EXPORT_SYMBOL_GPL(scsi_bus_type);
 
-- 
cgit v1.1


From be948fc30dabc347e4fba4daf4da9fd83d2abf49 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Mon, 2 Aug 2010 16:02:24 -0500
Subject: [SCSI] libfc: call fc_remote_port_chkready under the host lock.

The rport port state and flags are set under the host lock,
so this patch calls fc_remote_port_chkready with the host lock
held like is also done in the other fc drivers.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/libfc/fc_fcp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index eac4d09..c797f6b 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1765,14 +1765,14 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
 	struct fcoe_dev_stats *stats;
 
 	lport = shost_priv(sc_cmd->device->host);
-	spin_unlock_irq(lport->host->host_lock);
 
 	rval = fc_remote_port_chkready(rport);
 	if (rval) {
 		sc_cmd->result = rval;
 		done(sc_cmd);
-		goto out;
+		return 0;
 	}
+	spin_unlock_irq(lport->host->host_lock);
 
 	if (!*(struct fc_remote_port **)rport->dd_data) {
 		/*
-- 
cgit v1.1


From 3013cea83ef3532e49b973a0bc9b3562f56871c6 Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Fri, 30 Jul 2010 14:25:46 +0530
Subject: [SCSI] qla4xxx: set correct value in sess->recovery_tmo

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_def.h  | 5 +++--
 drivers/scsi/qla4xxx/ql4_init.c | 3 ---
 drivers/scsi/qla4xxx/ql4_mbx.c  | 1 -
 drivers/scsi/qla4xxx/ql4_os.c   | 7 ++++---
 4 files changed, 7 insertions(+), 9 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index a79da8d..6af5d04 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -137,6 +137,9 @@
 #define ISCSI_ALIAS_SIZE		32	/* ISCSI Alias name size */
 #define ISCSI_NAME_SIZE			0xE0	/* ISCSI Name size */
 
+#define QL4_SESS_RECOVERY_TMO		30	/* iSCSI session */
+						/* recovery timeout */
+
 #define LSDW(x) ((u32)((u64)(x)))
 #define MSDW(x) ((u32)((((u64)(x)) >> 16) >> 16))
 
@@ -249,7 +252,6 @@ struct ddb_entry {
 	uint32_t default_time2wait; /* Default Min time between
 				     * relogins (+aens) */
 
-	atomic_t port_down_timer; /* Device connection timer */
 	atomic_t retry_relogin_timer; /* Min Time between relogins
 				       * (4000 only) */
 	atomic_t relogin_timer;	/* Max Time to wait for relogin to complete */
@@ -474,7 +476,6 @@ struct scsi_qla_host {
 	uint32_t timer_active;
 
 	/* Recovery Timers */
-	uint32_t port_down_retry_count;
 	uint32_t discovery_wait;
 	atomic_t check_relogin_timeouts;
 	uint32_t retry_reset_ha_cnt;
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 3007357..b69c573 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -669,7 +669,6 @@ static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha,
 	}
 
 	ddb_entry->fw_ddb_index = fw_ddb_index;
-	atomic_set(&ddb_entry->port_down_timer, ha->port_down_retry_count);
 	atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY);
 	atomic_set(&ddb_entry->relogin_timer, 0);
 	atomic_set(&ddb_entry->relogin_retry_count, 0);
@@ -1556,8 +1555,6 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index,
 	/* Device is back online. */
 	if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) {
 		atomic_set(&ddb_entry->state, DDB_STATE_ONLINE);
-		atomic_set(&ddb_entry->port_down_timer,
-			   ha->port_down_retry_count);
 		atomic_set(&ddb_entry->relogin_retry_count, 0);
 		atomic_set(&ddb_entry->relogin_timer, 0);
 		clear_bit(DF_RELOGIN, &ddb_entry->flags);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 940ee56..c4e036b 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -361,7 +361,6 @@ qla4xxx_update_local_ifcb(struct scsi_qla_host *ha,
 	       min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/
 
 	/* Save Command Line Paramater info */
-	ha->port_down_retry_count = le16_to_cpu(init_fw_cb->conn_ka_timeout);
 	ha->discovery_wait = ql4xdiscoverywait;
 
 	if (ha->acb_version == ACB_SUPPORTED) {
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 5529b2a..fd1af23 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -163,10 +163,10 @@ static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session)
 	if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) {
 		atomic_set(&ddb_entry->state, DDB_STATE_DEAD);
 
-		DEBUG2(printk("scsi%ld: %s: ddb [%d] port down retry count "
+		DEBUG2(printk("scsi%ld: %s: ddb [%d] session recovery timeout "
 			      "of (%d) secs exhausted, marking device DEAD.\n",
 			      ha->host_no, __func__, ddb_entry->fw_ddb_index,
-			      ha->port_down_retry_count));
+			      QL4_SESS_RECOVERY_TMO));
 
 		qla4xxx_wake_dpc(ha);
 	}
@@ -298,7 +298,8 @@ int qla4xxx_add_sess(struct ddb_entry *ddb_entry)
 {
 	int err;
 
-	ddb_entry->sess->recovery_tmo = ddb_entry->ha->port_down_retry_count;
+	ddb_entry->sess->recovery_tmo = QL4_SESS_RECOVERY_TMO;
+
 	err = iscsi_add_session(ddb_entry->sess, ddb_entry->fw_ddb_index);
 	if (err) {
 		DEBUG2(printk(KERN_ERR "Could not add session.\n"));
-- 
cgit v1.1


From b173a132cbf0a4a48b2f341716e20a6d8b24957e Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Fri, 30 Jul 2010 14:26:08 +0530
Subject: [SCSI] qla4xxx: Use the correct request queue.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_iocb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index f89973d..4ef9ba1 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -19,7 +19,7 @@ qla4xxx_space_in_req_ring(struct scsi_qla_host *ha, uint16_t req_cnt)
 
 	/* Calculate number of free request entries. */
 	if ((req_cnt + 2) >= ha->req_q_count) {
-		cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out);
+		cnt = (uint16_t) ha->isp_ops->rd_shdw_req_q_out(ha);
 		if (ha->request_in < cnt)
 			ha->req_q_count = cnt - ha->request_in;
 		else
-- 
cgit v1.1


From 9d4946f89fc050cadf66d08c47379ab62848a5b7 Mon Sep 17 00:00:00 2001
From: Lalit Chandivade <lalit.chandivade@qlogic.com>
Date: Fri, 30 Jul 2010 14:26:31 +0530
Subject: [SCSI] qla4xxx: Stop firmware before doing init firmware.

If BIOS is enabled then drivers init firmware fails since
BIOS has done the init once.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_init.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index b69c573..39048d9 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -445,6 +445,12 @@ static int qla4xxx_init_firmware(struct scsi_qla_host *ha)
 {
 	int status = QLA_ERROR;
 
+	/* For 82xx, stop firmware before initializing because if BIOS
+	 * has previously initialized firmware, then driver's initialize
+	 * firmware will fail. */
+	if (is_qla8022(ha))
+		qla4_8xxx_stop_firmware(ha);
+
 	ql4_printk(KERN_INFO, ha, "Initializing firmware..\n");
 	if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) {
 		DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware "
-- 
cgit v1.1


From 0753b4871d5b09687cee652b380a6ca15aee330e Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Fri, 30 Jul 2010 14:27:19 +0530
Subject: [SCSI] qla4xxx: clear AF_DPC_SCHEDULED flage when exit from do_dpc

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_os.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index fd1af23..e575d76 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -1208,7 +1208,7 @@ static void qla4xxx_do_dpc(struct work_struct *work)
 
 	/* Initialization not yet finished. Don't do anything yet. */
 	if (!test_bit(AF_INIT_DONE, &ha->flags))
-		return;
+		goto do_dpc_exit;
 
 	/* HBA is in the process of being permanently disabled.
 	 * Don't process anything */
@@ -1347,6 +1347,8 @@ dpc_post_reset_ha:
 			}
 		}
 	}
+
+do_dpc_exit:
 	clear_bit(AF_DPC_SCHEDULED, &ha->flags);
 }
 
-- 
cgit v1.1


From 2ccdf0dce41a39db3721fe801dac5c5effa8e4be Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Fri, 30 Jul 2010 14:27:45 +0530
Subject: [SCSI] qla4xxx: updated mbx_sys_info struct to sync with FW 4.6.x

Also, changed boundary checking from size of total
structure to verification that we received the amount of
data needed to cache inernally. This change will provide
compatibility with mbx_sys_info structure sizes in both
older and newer firmware versions.

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_fw.h | 20 ++++++++++----------
 drivers/scsi/qla4xxx/ql4_nx.c |  3 ++-
 2 files changed, 12 insertions(+), 11 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index c94c9dd..0336c6d 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -673,17 +673,17 @@ struct flash_sys_info {
 };	/* 200 */
 
 struct mbx_sys_info {
-	uint8_t board_id_str[16];	/* Keep board ID string first */
-					/* in this structure for GUI. */
-	uint16_t board_id;	/* board ID code */
-	uint16_t phys_port_cnt;	/* number of physical network ports */
-	uint16_t port_num;	/* network port for this PCI function */
+	uint8_t board_id_str[16];   /*  0-f  Keep board ID string first */
+				/* in this structure for GUI. */
+	uint16_t board_id;	/* 10-11 board ID code */
+	uint16_t phys_port_cnt;	/* 12-13 number of physical network ports */
+	uint16_t port_num;	/* 14-15 network port for this PCI function */
 				/* (port 0 is first port) */
-	uint8_t mac_addr[6];	/* MAC address for this PCI function */
-	uint32_t iscsi_pci_func_cnt;	/* number of iSCSI PCI functions */
-	uint32_t pci_func;		/* this PCI function */
-	unsigned char serial_number[16];	/* serial number string */
-	uint8_t reserved[16];
+	uint8_t mac_addr[6];	/* 16-1b MAC address for this PCI function */
+	uint32_t iscsi_pci_func_cnt;  /* 1c-1f number of iSCSI PCI functions */
+	uint32_t pci_func;	      /* 20-23 this PCI function */
+	unsigned char serial_number[16];  /* 24-33 serial number string */
+	uint8_t reserved[12];		  /* 34-3f */
 };
 
 struct crash_record {
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 3e119ae..ec46651 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -2145,7 +2145,8 @@ int qla4_8xxx_get_sys_info(struct scsi_qla_host *ha)
 		goto exit_validate_mac82;
 	}
 
-	if (mbox_sts[4] < sizeof(*sys_info)) {
+	/* Make sure we receive the minimum required data to cache internally */
+	if (mbox_sts[4] < offsetof(struct mbx_sys_info, reserved)) {
 		DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO data receive"
 		    " error (%x)\n", ha->host_no, __func__, mbox_sts[4]));
 		goto exit_validate_mac82;
-- 
cgit v1.1


From 21033639699d883668f6937b03e7b710771ad37e Mon Sep 17 00:00:00 2001
From: Nilesh Javali <nilesh.javali@qlogic.com>
Date: Fri, 30 Jul 2010 14:28:07 +0530
Subject: [SCSI] qla4xxx: Handle outstanding mbx cmds on hung f/w scenarios

Outstanding mailbox commands, have no way to recover on f/w hung, and we
timeout on waiting for mbx response. This in turn affects the recovery process
as follows:
 - We might already be in dpc while waiting for mbx to complete, so recovery for
   that pci function will never get invoked. Reset Timeout (10 sec) is far less
   than mbx timeout (30 sec).
 - Other mbx cmds will get stuck due to serial mbx access.

Solution is to identify fw-hung scenario and handle outstanding mbx commands to
have an early-exit instead of waiting for response.
Other mbx commands waiting for access will also do an early-exit if fw-hung is
still applicable.

Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_def.h  |  1 +
 drivers/scsi/qla4xxx/ql4_glbl.h |  1 +
 drivers/scsi/qla4xxx/ql4_mbx.c  | 39 +++++++++++++++++++++++++++++++++++++++
 drivers/scsi/qla4xxx/ql4_nx.c   |  3 +++
 drivers/scsi/qla4xxx/ql4_os.c   |  3 +++
 5 files changed, 47 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 6af5d04..6c92627 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -380,6 +380,7 @@ struct scsi_qla_host {
 #define AF_MSI_ENABLED			16 /* 0x00010000 */
 #define AF_MSIX_ENABLED			17 /* 0x00020000 */
 #define AF_MBOX_COMMAND_NOPOLL		18 /* 0x00040000 */
+#define AF_FW_RECOVERY			19 /* 0x00080000 */
 
 
 	unsigned long dpc_flags;
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index c9cd5d6..ea3db23 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -93,6 +93,7 @@ void qla4xxx_free_irqs(struct scsi_qla_host *ha);
 void qla4xxx_process_response_queue(struct scsi_qla_host *ha);
 void qla4xxx_wake_dpc(struct scsi_qla_host *ha);
 void qla4xxx_get_conn_event_log(struct scsi_qla_host *ha);
+void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha);
 
 void qla4_8xxx_pci_config(struct scsi_qla_host *);
 int qla4_8xxx_iospace_config(struct scsi_qla_host *ha);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index c4e036b..1003e48 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -39,6 +39,15 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 			      "pointer\n", ha->host_no, __func__));
 		return status;
 	}
+
+	if (is_qla8022(ha) &&
+	    test_bit(AF_FW_RECOVERY, &ha->flags)) {
+		DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: prematurely "
+		    "completing mbx cmd as firmware recovery detected\n",
+		    ha->host_no, __func__));
+		return status;
+	}
+
 	/* Mailbox code active */
 	wait_count = MBOX_TOV * 100;
 
@@ -196,6 +205,14 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 
 	/* Check for mailbox timeout. */
 	if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) {
+		if (is_qla8022(ha) &&
+		    test_bit(AF_FW_RECOVERY, &ha->flags)) {
+			DEBUG2(ql4_printk(KERN_INFO, ha,
+			    "scsi%ld: %s: prematurely completing mbx cmd as "
+			    "firmware recovery detected\n",
+			    ha->host_no, __func__));
+			goto mbox_exit;
+		}
 		DEBUG2(printk("scsi%ld: Mailbox Cmd 0x%08X timed out ...,"
 			      " Scheduling Adapter Reset\n", ha->host_no,
 			      mbx_cmd[0]));
@@ -246,6 +263,28 @@ mbox_exit:
 	return status;
 }
 
+void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha)
+{
+	set_bit(AF_FW_RECOVERY, &ha->flags);
+	ql4_printk(KERN_INFO, ha, "scsi%ld: %s: set FW RECOVERY!\n",
+	    ha->host_no, __func__);
+
+	if (test_bit(AF_MBOX_COMMAND, &ha->flags)) {
+		if (test_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags)) {
+			complete(&ha->mbx_intr_comp);
+			ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
+			    "recovery, doing premature completion of "
+			    "mbx cmd\n", ha->host_no, __func__);
+
+		} else {
+			set_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
+			ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw "
+			    "recovery, doing premature completion of "
+			    "polling mbx cmd\n", ha->host_no, __func__);
+		}
+	}
+}
+
 static uint8_t
 qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd,
 		 uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma)
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index ec46651..0830ea9 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -2105,6 +2105,9 @@ qla4_8xxx_isp_reset(struct scsi_qla_host *ha)
 	qla4_8xxx_clear_rst_ready(ha);
 	qla4_8xxx_idc_unlock(ha);
 
+	if (rval == QLA_SUCCESS)
+		clear_bit(AF_FW_RECOVERY, &ha->flags);
+
 	return rval;
 }
 
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index e575d76..2bb362c 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -663,6 +663,7 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
 			ha->seconds_since_last_heartbeat = 0;
 			halt_status = qla4_8xxx_rd_32(ha,
 			    QLA82XX_PEG_HALT_STATUS1);
+
 			/* Since we cannot change dev_state in interrupt
 			 * context, set appropriate DPC flag then wakeup
 			 * DPC */
@@ -674,6 +675,7 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
 				set_bit(DPC_RESET_HA, &ha->dpc_flags);
 			}
 			qla4xxx_wake_dpc(ha);
+			qla4xxx_mailbox_premature_completion(ha);
 		}
 	}
 	ha->fw_heartbeat_counter = fw_heartbeat_counter;
@@ -699,6 +701,7 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
 			    ha->host_no, __func__);
 			set_bit(DPC_RESET_HA, &ha->dpc_flags);
 			qla4xxx_wake_dpc(ha);
+			qla4xxx_mailbox_premature_completion(ha);
 		} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
 		    !test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) {
 			printk("scsi%ld: %s: HW State: NEED QUIES!\n",
-- 
cgit v1.1


From 2232be0d5707cd331b92027c0fd7ea5e843c2121 Mon Sep 17 00:00:00 2001
From: Lalit Chandivade <lalit.chandivade@qlogic.com>
Date: Fri, 30 Jul 2010 14:38:47 +0530
Subject: [SCSI] qla4xxx: Added AER support for ISP82xx

Added support for PCI error handling

Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com>
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_def.h  |  30 +++-
 drivers/scsi/qla4xxx/ql4_glbl.h |   1 +
 drivers/scsi/qla4xxx/ql4_init.c |   5 +-
 drivers/scsi/qla4xxx/ql4_isr.c  |   3 +
 drivers/scsi/qla4xxx/ql4_mbx.c  |   8 ++
 drivers/scsi/qla4xxx/ql4_nx.c   |   8 +-
 drivers/scsi/qla4xxx/ql4_os.c   | 301 ++++++++++++++++++++++++++++++++++++++++
 7 files changed, 352 insertions(+), 4 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 6c92627..9dc0a66 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -36,6 +36,24 @@
 #include "ql4_dbg.h"
 #include "ql4_nx.h"
 
+#if defined(CONFIG_PCIEAER)
+#include <linux/aer.h>
+#else
+/* AER releated */
+static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
+static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
+static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
+{
+	return -EINVAL;
+}
+#endif
+
 #ifndef PCI_DEVICE_ID_QLOGIC_ISP4010
 #define PCI_DEVICE_ID_QLOGIC_ISP4010	0x4010
 #endif
@@ -381,7 +399,8 @@ struct scsi_qla_host {
 #define AF_MSIX_ENABLED			17 /* 0x00020000 */
 #define AF_MBOX_COMMAND_NOPOLL		18 /* 0x00040000 */
 #define AF_FW_RECOVERY			19 /* 0x00080000 */
-
+#define AF_EEH_BUSY			20 /* 0x00100000 */
+#define AF_PCI_CHANNEL_IO_PERM_FAILURE	21 /* 0x00200000 */
 
 	unsigned long dpc_flags;
 
@@ -617,6 +636,15 @@ static inline int is_qla8022(struct scsi_qla_host *ha)
 	return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022;
 }
 
+/* Note: Currently AER/EEH is now supported only for 8022 cards
+ * This function needs to be updated when AER/EEH is enabled
+ * for other cards.
+ */
+static inline int is_aer_supported(struct scsi_qla_host *ha)
+{
+	return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022;
+}
+
 static inline int adapter_up(struct scsi_qla_host *ha)
 {
 	return (test_bit(AF_ONLINE, &ha->flags) != 0) &&
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index ea3db23..f065204 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -132,6 +132,7 @@ void qla4_8xxx_idc_unlock(struct scsi_qla_host *ha);
 int qla4_8xxx_device_state_handler(struct scsi_qla_host *ha);
 void qla4_8xxx_need_qsnt_handler(struct scsi_qla_host *ha);
 void qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha);
+inline void qla4_8xxx_set_drv_active(struct scsi_qla_host *ha);
 
 extern int ql4xextended_error_logging;
 extern int ql4xdiscoverywait;
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index 39048d9..4c9be77 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -308,7 +308,6 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha)
 			DEBUG2(printk("scsi%ld: %s: unable to get firmware "
 				      "state\n", ha->host_no, __func__));
 			break;
-
 		}
 
 		if (ha->firmware_state & FW_STATE_ERROR) {
@@ -445,6 +444,10 @@ static int qla4xxx_init_firmware(struct scsi_qla_host *ha)
 {
 	int status = QLA_ERROR;
 
+	if (is_aer_supported(ha) &&
+	    test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))
+		return status;
+
 	/* For 82xx, stop firmware before initializing because if BIOS
 	 * has previously initialized firmware, then driver's initialize
 	 * firmware will fail. */
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index aa65697..2a1ab63 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -816,6 +816,9 @@ irqreturn_t qla4_8xxx_intr_handler(int irq, void *dev_id)
 	unsigned long flags = 0;
 	uint8_t reqs_count = 0;
 
+	if (unlikely(pci_channel_offline(ha->pdev)))
+		return IRQ_HANDLED;
+
 	ha->isr_count++;
 	status = qla4_8xxx_rd_32(ha, ISR_INT_VECTOR);
 	if (!(status & ha->nx_legacy_intr.int_vec_bit))
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 1003e48..9002170 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -48,6 +48,13 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 		return status;
 	}
 
+	if ((is_aer_supported(ha)) &&
+	    (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))) {
+		DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, "
+		    "timeout MBX Exiting.\n", ha->host_no, __func__));
+		return status;
+	}
+
 	/* Mailbox code active */
 	wait_count = MBOX_TOV * 100;
 
@@ -159,6 +166,7 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 		while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) {
 			if (time_after_eq(jiffies, wait_count))
 				break;
+
 			/*
 			 * Service the interrupt.
 			 * The ISR will save the mailbox status registers
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 0830ea9..1b85235 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -1418,7 +1418,7 @@ static int qla4_8xxx_rcvpeg_ready(struct scsi_qla_host *ha)
 	return QLA_SUCCESS;
 }
 
-static inline void
+inline void
 qla4_8xxx_set_drv_active(struct scsi_qla_host *ha)
 {
 	uint32_t drv_active;
@@ -1441,11 +1441,15 @@ qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha)
 static inline int
 qla4_8xxx_need_reset(struct scsi_qla_host *ha)
 {
-	uint32_t drv_state;
+	uint32_t drv_state, drv_active;
 	int rval;
 
+	drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
 	drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
 	rval = drv_state & (1 << (ha->func_num * 4));
+	if ((test_bit(AF_EEH_BUSY, &ha->flags)) && drv_active)
+		rval = 1;
+
 	return rval;
 }
 
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index 2bb362c..370d40f 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -475,6 +475,14 @@ static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
 	struct srb *srb;
 	int rval;
 
+	if (test_bit(AF_EEH_BUSY, &ha->flags)) {
+		if (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))
+			cmd->result = DID_NO_CONNECT << 16;
+		else
+			cmd->result = DID_REQUEUE << 16;
+		goto qc_fail_command;
+	}
+
 	if (!sess) {
 		cmd->result = DID_IMM_RETRY << 16;
 		goto qc_fail_command;
@@ -655,6 +663,13 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha)
 	uint32_t fw_heartbeat_counter, halt_status;
 
 	fw_heartbeat_counter = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER);
+	/* If PEG_ALIVE_COUNTER is 0xffffffff, AER/EEH is in progress, ignore */
+	if (fw_heartbeat_counter == 0xffffffff) {
+		DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen "
+		    "state, QLA82XX_PEG_ALIVE_COUNTER is 0xffffffff\n",
+		    ha->host_no, __func__));
+		return;
+	}
 
 	if (ha->fw_heartbeat_counter == fw_heartbeat_counter) {
 		ha->seconds_since_last_heartbeat++;
@@ -723,6 +738,19 @@ static void qla4xxx_timer(struct scsi_qla_host *ha)
 {
 	struct ddb_entry *ddb_entry, *dtemp;
 	int start_dpc = 0;
+	uint16_t w;
+
+	/* If we are in the middle of AER/EEH processing
+	 * skip any processing and reschedule the timer
+	 */
+	if (test_bit(AF_EEH_BUSY, &ha->flags)) {
+		mod_timer(&ha->timer, jiffies + HZ);
+		return;
+	}
+
+	/* Hardware read to trigger an EEH error during mailbox waits. */
+	if (!pci_channel_offline(ha->pdev))
+		pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
 
 	if (test_bit(AF_HBA_GOING_AWAY, &ha->flags)) {
 		DEBUG2(ql4_printk(KERN_INFO, ha, "%s exited. HBA GOING AWAY\n",
@@ -1213,6 +1241,12 @@ static void qla4xxx_do_dpc(struct work_struct *work)
 	if (!test_bit(AF_INIT_DONE, &ha->flags))
 		goto do_dpc_exit;
 
+	if (test_bit(AF_EEH_BUSY, &ha->flags)) {
+		DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n",
+		    ha->host_no, __func__, ha->flags));
+		goto do_dpc_exit;
+	}
+
 	/* HBA is in the process of being permanently disabled.
 	 * Don't process anything */
 	if (test_bit(AF_HBA_GOING_AWAY, &ha->flags))
@@ -1618,6 +1652,8 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
 	ha->host = host;
 	ha->host_no = host->host_no;
 
+	pci_enable_pcie_error_reporting(pdev);
+
 	/* Setup Runtime configurable options */
 	if (is_qla8022(ha)) {
 		ha->isp_ops = &qla4_8xxx_isp_ops;
@@ -1636,6 +1672,10 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
 		ha->isp_ops = &qla4xxx_isp_ops;
 	}
 
+	/* Set EEH reset type to fundamental if required by hba */
+	if (is_qla8022(ha))
+		pdev->needs_freset = 1;
+
 	/* Configure PCI I/O space. */
 	ret = ha->isp_ops->iospace_config(ha);
 	if (ret)
@@ -1732,6 +1772,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
 		}
 	}
 
+	pci_save_state(ha->pdev);
 	ha->isp_ops->enable_intrs(ha);
 
 	/* Start timer thread. */
@@ -1758,6 +1799,7 @@ probe_failed:
 	qla4xxx_free_adapter(ha);
 
 probe_failed_ioconfig:
+	pci_disable_pcie_error_reporting(pdev);
 	scsi_host_put(ha->host);
 
 probe_disable_device:
@@ -1787,6 +1829,7 @@ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev)
 
 	scsi_host_put(ha->host);
 
+	pci_disable_pcie_error_reporting(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 }
@@ -1883,6 +1926,17 @@ static int qla4xxx_eh_wait_on_command(struct scsi_qla_host *ha,
 	int done = 0;
 	struct srb *rp;
 	uint32_t max_wait_time = EH_WAIT_CMD_TOV;
+	int ret = SUCCESS;
+
+	/* Dont wait on command if PCI error is being handled
+	 * by PCI AER driver
+	 */
+	if (unlikely(pci_channel_offline(ha->pdev)) ||
+	    (test_bit(AF_EEH_BUSY, &ha->flags))) {
+		ql4_printk(KERN_WARNING, ha, "scsi%ld: Return from %s\n",
+		    ha->host_no, __func__);
+		return ret;
+	}
 
 	do {
 		/* Checking to see if its returned to OS */
@@ -2178,6 +2232,252 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
 	return return_status;
 }
 
+/* PCI AER driver recovers from all correctable errors w/o
+ * driver intervention. For uncorrectable errors PCI AER
+ * driver calls the following device driver's callbacks
+ *
+ * - Fatal Errors - link_reset
+ * - Non-Fatal Errors - driver's pci_error_detected() which
+ * returns CAN_RECOVER, NEED_RESET or DISCONNECT.
+ *
+ * PCI AER driver calls
+ * CAN_RECOVER - driver's pci_mmio_enabled(), mmio_enabled
+ *               returns RECOVERED or NEED_RESET if fw_hung
+ * NEED_RESET - driver's slot_reset()
+ * DISCONNECT - device is dead & cannot recover
+ * RECOVERED - driver's pci_resume()
+ */
+static pci_ers_result_t
+qla4xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+	struct scsi_qla_host *ha = pci_get_drvdata(pdev);
+
+	ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: error detected:state %x\n",
+	    ha->host_no, __func__, state);
+
+	if (!is_aer_supported(ha))
+		return PCI_ERS_RESULT_NONE;
+
+	switch (state) {
+	case pci_channel_io_normal:
+		clear_bit(AF_EEH_BUSY, &ha->flags);
+		return PCI_ERS_RESULT_CAN_RECOVER;
+	case pci_channel_io_frozen:
+		set_bit(AF_EEH_BUSY, &ha->flags);
+		qla4xxx_mailbox_premature_completion(ha);
+		qla4xxx_free_irqs(ha);
+		pci_disable_device(pdev);
+		return PCI_ERS_RESULT_NEED_RESET;
+	case pci_channel_io_perm_failure:
+		set_bit(AF_EEH_BUSY, &ha->flags);
+		set_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags);
+		qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16);
+		return PCI_ERS_RESULT_DISCONNECT;
+	}
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * qla4xxx_pci_mmio_enabled() gets called if
+ * qla4xxx_pci_error_detected() returns PCI_ERS_RESULT_CAN_RECOVER
+ * and read/write to the device still works.
+ **/
+static pci_ers_result_t
+qla4xxx_pci_mmio_enabled(struct pci_dev *pdev)
+{
+	struct scsi_qla_host *ha = pci_get_drvdata(pdev);
+
+	if (!is_aer_supported(ha))
+		return PCI_ERS_RESULT_NONE;
+
+	if (test_bit(AF_FW_RECOVERY, &ha->flags)) {
+		ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: firmware hang  -- "
+		    "mmio_enabled\n", ha->host_no, __func__);
+		return PCI_ERS_RESULT_NEED_RESET;
+	} else
+		return PCI_ERS_RESULT_RECOVERED;
+}
+
+uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha)
+{
+	uint32_t rval = QLA_ERROR;
+	int fn;
+	struct pci_dev *other_pdev = NULL;
+
+	ql4_printk(KERN_WARNING, ha, "scsi%ld: In %s\n", ha->host_no, __func__);
+
+	set_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
+
+	if (test_bit(AF_ONLINE, &ha->flags)) {
+		clear_bit(AF_ONLINE, &ha->flags);
+		qla4xxx_mark_all_devices_missing(ha);
+		qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS);
+		qla4xxx_abort_active_cmds(ha, DID_RESET << 16);
+	}
+
+	fn = PCI_FUNC(ha->pdev->devfn);
+	while (fn > 0) {
+		fn--;
+		ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Finding PCI device at "
+		    "func %x\n", ha->host_no, __func__, fn);
+		/* Get the pci device given the domain, bus,
+		 * slot/function number */
+		other_pdev =
+		    pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus),
+		    ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn),
+		    fn));
+
+		if (!other_pdev)
+			continue;
+
+		if (atomic_read(&other_pdev->enable_cnt)) {
+			ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Found PCI "
+			    "func in enabled state%x\n", ha->host_no,
+			    __func__, fn);
+			pci_dev_put(other_pdev);
+			break;
+		}
+		pci_dev_put(other_pdev);
+	}
+
+	/* The first function on the card, the reset owner will
+	 * start & initialize the firmware. The other functions
+	 * on the card will reset the firmware context
+	 */
+	if (!fn) {
+		ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn being reset "
+		    "0x%x is the owner\n", ha->host_no, __func__,
+		    ha->pdev->devfn);
+
+		qla4_8xxx_idc_lock(ha);
+		qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+		    QLA82XX_DEV_COLD);
+
+		qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION,
+		    QLA82XX_IDC_VERSION);
+
+		qla4_8xxx_idc_unlock(ha);
+		clear_bit(AF_FW_RECOVERY, &ha->flags);
+		rval = qla4xxx_initialize_adapter(ha, PRESERVE_DDB_LIST);
+		qla4_8xxx_idc_lock(ha);
+
+		if (rval != QLA_SUCCESS) {
+			ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
+			    "FAILED\n", ha->host_no, __func__);
+			qla4_8xxx_clear_drv_active(ha);
+			qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+			    QLA82XX_DEV_FAILED);
+		} else {
+			ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: "
+			    "READY\n", ha->host_no, __func__);
+			qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+			    QLA82XX_DEV_READY);
+			/* Clear driver state register */
+			qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0);
+			qla4_8xxx_set_drv_active(ha);
+			ha->isp_ops->enable_intrs(ha);
+		}
+		qla4_8xxx_idc_unlock(ha);
+	} else {
+		ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn 0x%x is not "
+		    "the reset owner\n", ha->host_no, __func__,
+		    ha->pdev->devfn);
+		if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) ==
+		    QLA82XX_DEV_READY)) {
+			clear_bit(AF_FW_RECOVERY, &ha->flags);
+			rval = qla4xxx_initialize_adapter(ha,
+			    PRESERVE_DDB_LIST);
+			if (rval == QLA_SUCCESS)
+				ha->isp_ops->enable_intrs(ha);
+			qla4_8xxx_idc_lock(ha);
+			qla4_8xxx_set_drv_active(ha);
+			qla4_8xxx_idc_unlock(ha);
+		}
+	}
+	clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
+	return rval;
+}
+
+static pci_ers_result_t
+qla4xxx_pci_slot_reset(struct pci_dev *pdev)
+{
+	pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT;
+	struct scsi_qla_host *ha = pci_get_drvdata(pdev);
+	int rc;
+
+	ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: slot_reset\n",
+	    ha->host_no, __func__);
+
+	if (!is_aer_supported(ha))
+		return PCI_ERS_RESULT_NONE;
+
+	/* Restore the saved state of PCIe device -
+	 * BAR registers, PCI Config space, PCIX, MSI,
+	 * IOV states
+	 */
+	pci_restore_state(pdev);
+
+	/* pci_restore_state() clears the saved_state flag of the device
+	 * save restored state which resets saved_state flag
+	 */
+	pci_save_state(pdev);
+
+	/* Initialize device or resume if in suspended state */
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Cant re-enable "
+		    "device after reset\n", ha->host_no, __func__);
+		goto exit_slot_reset;
+	}
+
+	ret = qla4xxx_request_irqs(ha);
+	if (ret) {
+		ql4_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d"
+		    " already in use.\n", pdev->irq);
+		goto exit_slot_reset;
+	}
+
+	if (is_qla8022(ha)) {
+		if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) {
+			ret = PCI_ERS_RESULT_RECOVERED;
+			goto exit_slot_reset;
+		} else
+			goto exit_slot_reset;
+	}
+
+exit_slot_reset:
+	ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Return=%x\n"
+	    "device after reset\n", ha->host_no, __func__, ret);
+	return ret;
+}
+
+static void
+qla4xxx_pci_resume(struct pci_dev *pdev)
+{
+	struct scsi_qla_host *ha = pci_get_drvdata(pdev);
+	int ret;
+
+	ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: pci_resume\n",
+	    ha->host_no, __func__);
+
+	ret = qla4xxx_wait_for_hba_online(ha);
+	if (ret != QLA_SUCCESS) {
+		ql4_printk(KERN_ERR, ha, "scsi%ld: %s: the device failed to "
+		    "resume I/O from slot/link_reset\n", ha->host_no,
+		     __func__);
+	}
+
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+	clear_bit(AF_EEH_BUSY, &ha->flags);
+}
+
+static struct pci_error_handlers qla4xxx_err_handler = {
+	.error_detected = qla4xxx_pci_error_detected,
+	.mmio_enabled = qla4xxx_pci_mmio_enabled,
+	.slot_reset = qla4xxx_pci_slot_reset,
+	.resume = qla4xxx_pci_resume,
+};
+
 static struct pci_device_id qla4xxx_pci_tbl[] = {
 	{
 		.vendor		= PCI_VENDOR_ID_QLOGIC,
@@ -2212,6 +2512,7 @@ static struct pci_driver qla4xxx_pci_driver = {
 	.id_table	= qla4xxx_pci_tbl,
 	.probe		= qla4xxx_probe_adapter,
 	.remove		= qla4xxx_remove_adapter,
+	.err_handler = &qla4xxx_err_handler,
 };
 
 static int __init qla4xxx_module_init(void)
-- 
cgit v1.1


From e8ed741fcd521a25f1d983ec81f72ac823d8429a Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Fri, 30 Jul 2010 14:28:52 +0530
Subject: [SCSI] qla4xxx: Update driver version to 5.02.00-k3

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index c905dbd..a77b973 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -5,4 +5,4 @@
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
 
-#define QLA4XXX_DRIVER_VERSION	"5.02.00-k2"
+#define QLA4XXX_DRIVER_VERSION	"5.02.00-k3"
-- 
cgit v1.1


From 823d219f23b958292279cfdc8583dc4f1f91c2d5 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sun, 1 Aug 2010 19:23:35 +0200
Subject: [SCSI] pm8001: introduce missing kfree

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
expression E;
identifier f,f1;
position p1,p2;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
<... when != x
     when != if (...) { <+...x...+> }
     when != (x) == NULL
     when != (x) != NULL
     when != (x) == 0
     when != (x) != 0
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return <+...x...+>;
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: jack wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/pm8001/pm8001_hwi.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 58d1134..9793aa6 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4199,8 +4199,10 @@ static int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 	circularQ = &pm8001_ha->inbnd_q_tbl[0];
 	memset(&nvmd_req, 0, sizeof(nvmd_req));
 	rc = pm8001_tag_alloc(pm8001_ha, &tag);
-	if (rc)
+	if (rc) {
+		kfree(fw_control_context);
 		return rc;
+	}
 	ccb = &pm8001_ha->ccb_info[tag];
 	ccb->ccb_tag = tag;
 	ccb->fw_control_context = fw_control_context;
@@ -4276,8 +4278,10 @@ static int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
 		ioctl_payload->length);
 	memset(&nvmd_req, 0, sizeof(nvmd_req));
 	rc = pm8001_tag_alloc(pm8001_ha, &tag);
-	if (rc)
+	if (rc) {
+		kfree(fw_control_context);
 		return rc;
+	}
 	ccb = &pm8001_ha->ccb_info[tag];
 	ccb->fw_control_context = fw_control_context;
 	ccb->ccb_tag = tag;
@@ -4387,6 +4391,7 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
 			fw_control->len, 0) != 0) {
 				PM8001_FAIL_DBG(pm8001_ha,
 					pm8001_printk("Mem alloc failure\n"));
+				kfree(fw_control_context);
 				return -ENOMEM;
 		}
 	}
@@ -4401,8 +4406,10 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
 	fw_control_context->virtAddr = buffer;
 	fw_control_context->len = fw_control->len;
 	rc = pm8001_tag_alloc(pm8001_ha, &tag);
-	if (rc)
+	if (rc) {
+		kfree(fw_control_context);
 		return rc;
+	}
 	ccb = &pm8001_ha->ccb_info[tag];
 	ccb->fw_control_context = fw_control_context;
 	ccb->ccb_tag = tag;
-- 
cgit v1.1


From bc73905abf7701920fe687564ecd3c6b316b9a2e Mon Sep 17 00:00:00 2001
From: James Smart <james.smart@emulex.com>
Date: Wed, 4 Aug 2010 16:11:18 -0400
Subject: [SCSI] lpfc 8.3.16: SLI Additions, updates, and code cleanup

- Remove unneeded Endian swap for Block Guard IOCB response
- Add a check for mailbox active before issuing the heartbeat command
- Correct heartbeat last_completion updates to avoid unneeded heartbeats
- Add Security crypto support to CONFIG_PORT mailbox command
- Add fips level and fips spec revision sysfs parameters
- Remove duplicate setting of ext_byte_len fields in lpfc_bsg_issue_mbox
- Switch call to memcpy_toio to __write32_copy to prevent unaligned 64 bit copy
- Change log message 0318 from an error to a warning as it is not an error
- Patch an incorrect call to lpfc_drain_txq on SLI-3 functions

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/lpfc/lpfc.h         |  3 +++
 drivers/scsi/lpfc/lpfc_attr.c    | 46 +++++++++++++++++++++++++++++++++-
 drivers/scsi/lpfc/lpfc_bsg.c     |  9 -------
 drivers/scsi/lpfc/lpfc_compat.h  |  3 +--
 drivers/scsi/lpfc/lpfc_hbadisc.c |  2 +-
 drivers/scsi/lpfc/lpfc_hw.h      | 26 +++++++++++---------
 drivers/scsi/lpfc/lpfc_init.c    | 53 +++++++++++++++++++++++++++-------------
 drivers/scsi/lpfc/lpfc_scsi.c    |  8 +++---
 drivers/scsi/lpfc/lpfc_sli.c     | 29 +++++++++++++++++-----
 9 files changed, 128 insertions(+), 51 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 3482d5a..a50aa03 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -775,6 +775,7 @@ struct lpfc_hba {
 	uint8_t temp_sensor_support;
 	/* Fields used for heart beat. */
 	unsigned long last_completion_time;
+	unsigned long skipped_hb;
 	struct timer_list hb_tmofunc;
 	uint8_t hb_outstanding;
 	enum hba_temp_state over_temp_state;
@@ -817,6 +818,8 @@ struct lpfc_hba {
 	uint32_t iocb_cnt;
 	uint32_t iocb_max;
 	atomic_t sdev_cnt;
+	uint8_t fips_spec_rev;
+	uint8_t fips_level;
 };
 
 static inline struct Scsi_Host *
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 868874c..fac26e4 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1239,6 +1239,44 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr,
 }
 
 /**
+ * lpfc_fips_level_show - Return the current FIPS level for the HBA
+ * @dev: class unused variable.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the module description text.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_fips_level_show(struct device *dev,  struct device_attribute *attr,
+		     char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", phba->fips_level);
+}
+
+/**
+ * lpfc_fips_rev_show - Return the FIPS Spec revision for the HBA
+ * @dev: class unused variable.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the module description text.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_fips_rev_show(struct device *dev,  struct device_attribute *attr,
+		   char *buf)
+{
+	struct Scsi_Host  *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", phba->fips_spec_rev);
+}
+
+/**
  * lpfc_param_show - Return a cfg attribute value in decimal
  *
  * Description:
@@ -1676,6 +1714,8 @@ static DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL);
 static DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL);
 static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL);
 static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL);
+static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL);
+static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL);
 
 
 static char *lpfc_soft_wwn_key = "C99G71SL8032A";
@@ -3280,7 +3320,7 @@ LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
 #	- Default will result in registering capabilities for all profiles.
 #
 */
-unsigned int lpfc_prot_mask =   SHOST_DIX_TYPE0_PROTECTION;
+unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION;
 
 module_param(lpfc_prot_mask, uint, 0);
 MODULE_PARM_DESC(lpfc_prot_mask, "host protection mask");
@@ -3385,6 +3425,8 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_iocb_hw,
 	&dev_attr_txq_hw,
 	&dev_attr_txcmplq_hw,
+	&dev_attr_lpfc_fips_level,
+	&dev_attr_lpfc_fips_rev,
 	NULL,
 };
 
@@ -3411,6 +3453,8 @@ struct device_attribute *lpfc_vport_attrs[] = {
 	&dev_attr_lpfc_max_scsicmpl_time,
 	&dev_attr_lpfc_stat_data_ctrl,
 	&dev_attr_lpfc_static_vport,
+	&dev_attr_lpfc_fips_level,
+	&dev_attr_lpfc_fips_rev,
 	NULL,
 };
 
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index d521569..49d0cf9 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -2724,15 +2724,6 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job,
 
 		pmboxq->context2 = ext;
 		pmboxq->in_ext_byte_len =
-			mbox_req->inExtWLen *
-			sizeof(uint32_t);
-		pmboxq->out_ext_byte_len =
-			mbox_req->outExtWLen *
-			sizeof(uint32_t);
-		pmboxq->mbox_offset_word =
-			mbox_req->mbOffset;
-		pmboxq->context2 = ext;
-		pmboxq->in_ext_byte_len =
 			mbox_req->inExtWLen * sizeof(uint32_t);
 		pmboxq->out_ext_byte_len =
 			mbox_req->outExtWLen * sizeof(uint32_t);
diff --git a/drivers/scsi/lpfc/lpfc_compat.h b/drivers/scsi/lpfc/lpfc_compat.h
index a11f1ae..75e2e56 100644
--- a/drivers/scsi/lpfc/lpfc_compat.h
+++ b/drivers/scsi/lpfc/lpfc_compat.h
@@ -82,8 +82,7 @@ lpfc_memcpy_from_slim( void *dest, void __iomem *src, unsigned int bytes)
 static inline void
 lpfc_memcpy_to_slim( void __iomem *dest, void *src, unsigned int bytes)
 {
-	/* actually returns 1 byte past dest */
-	memcpy_toio( dest, src, bytes);
+	__iowrite32_copy(dest, src, bytes);
 }
 
 static inline void
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 0639c99..efba65b 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -588,7 +588,7 @@ lpfc_work_done(struct lpfc_hba *phba)
 							(status &
 							 HA_RXMASK));
 		}
-		if (pring->txq_cnt)
+		if ((phba->sli_rev == LPFC_SLI_REV4) && pring->txq_cnt)
 			lpfc_drain_txq(phba);
 		/*
 		 * Turn on Ring interrupts
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index f5dbf2b..897caa0 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -2806,11 +2806,15 @@ typedef struct {
 	uint32_t rsvd6;           /* Reserved                             */
 
 #ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd7      : 16;  /* Reserved                             */
+	uint32_t fips_rev   : 3;   /* FIPS Spec Revision                   */
+	uint32_t fips_level : 4;   /* FIPS Level                           */
+	uint32_t sec_err    : 9;   /* security crypto error                */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t max_vpi    : 16;  /* Max number of virt N-Ports           */
-	uint32_t rsvd7      : 16;  /* Reserved                             */
+	uint32_t sec_err    : 9;   /* security crypto error                */
+	uint32_t fips_level : 4;   /* FIPS Level                           */
+	uint32_t fips_rev   : 3;   /* FIPS Spec Revision                   */
 #endif
 
 } CONFIG_PORT_VAR;
@@ -3441,63 +3445,63 @@ struct sli3_bg_fields {
 static inline uint32_t
 lpfc_bgs_get_bidir_bg_prof(uint32_t bgstat)
 {
-	return (le32_to_cpu(bgstat) & BGS_BIDIR_BG_PROF_MASK) >>
+	return (bgstat & BGS_BIDIR_BG_PROF_MASK) >>
 				BGS_BIDIR_BG_PROF_SHIFT;
 }
 
 static inline uint32_t
 lpfc_bgs_get_bidir_err_cond(uint32_t bgstat)
 {
-	return (le32_to_cpu(bgstat) & BGS_BIDIR_ERR_COND_FLAGS_MASK) >>
+	return (bgstat & BGS_BIDIR_ERR_COND_FLAGS_MASK) >>
 				BGS_BIDIR_ERR_COND_SHIFT;
 }
 
 static inline uint32_t
 lpfc_bgs_get_bg_prof(uint32_t bgstat)
 {
-	return (le32_to_cpu(bgstat) & BGS_BG_PROFILE_MASK) >>
+	return (bgstat & BGS_BG_PROFILE_MASK) >>
 				BGS_BG_PROFILE_SHIFT;
 }
 
 static inline uint32_t
 lpfc_bgs_get_invalid_prof(uint32_t bgstat)
 {
-	return (le32_to_cpu(bgstat) & BGS_INVALID_PROF_MASK) >>
+	return (bgstat & BGS_INVALID_PROF_MASK) >>
 				BGS_INVALID_PROF_SHIFT;
 }
 
 static inline uint32_t
 lpfc_bgs_get_uninit_dif_block(uint32_t bgstat)
 {
-	return (le32_to_cpu(bgstat) & BGS_UNINIT_DIF_BLOCK_MASK) >>
+	return (bgstat & BGS_UNINIT_DIF_BLOCK_MASK) >>
 				BGS_UNINIT_DIF_BLOCK_SHIFT;
 }
 
 static inline uint32_t
 lpfc_bgs_get_hi_water_mark_present(uint32_t bgstat)
 {
-	return (le32_to_cpu(bgstat) & BGS_HI_WATER_MARK_PRESENT_MASK) >>
+	return (bgstat & BGS_HI_WATER_MARK_PRESENT_MASK) >>
 				BGS_HI_WATER_MARK_PRESENT_SHIFT;
 }
 
 static inline uint32_t
 lpfc_bgs_get_reftag_err(uint32_t bgstat)
 {
-	return (le32_to_cpu(bgstat) & BGS_REFTAG_ERR_MASK) >>
+	return (bgstat & BGS_REFTAG_ERR_MASK) >>
 				BGS_REFTAG_ERR_SHIFT;
 }
 
 static inline uint32_t
 lpfc_bgs_get_apptag_err(uint32_t bgstat)
 {
-	return (le32_to_cpu(bgstat) & BGS_APPTAG_ERR_MASK) >>
+	return (bgstat & BGS_APPTAG_ERR_MASK) >>
 				BGS_APPTAG_ERR_SHIFT;
 }
 
 static inline uint32_t
 lpfc_bgs_get_guard_err(uint32_t bgstat)
 {
-	return (le32_to_cpu(bgstat) & BGS_GUARD_ERR_MASK) >>
+	return (bgstat & BGS_GUARD_ERR_MASK) >>
 				BGS_GUARD_ERR_SHIFT;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 2786ee3..9244aa6 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1032,27 +1032,46 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
 	/* If there is no heart beat outstanding, issue a heartbeat command */
 	if (phba->cfg_enable_hba_heartbeat) {
 		if (!phba->hb_outstanding) {
-			pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
-			if (!pmboxq) {
-				mod_timer(&phba->hb_tmofunc,
-					  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
-				return;
-			}
+			if ((!(psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) &&
+				(list_empty(&psli->mboxq))) {
+				pmboxq = mempool_alloc(phba->mbox_mem_pool,
+							GFP_KERNEL);
+				if (!pmboxq) {
+					mod_timer(&phba->hb_tmofunc,
+						 jiffies +
+						 HZ * LPFC_HB_MBOX_INTERVAL);
+					return;
+				}
 
-			lpfc_heart_beat(phba, pmboxq);
-			pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
-			pmboxq->vport = phba->pport;
-			retval = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT);
+				lpfc_heart_beat(phba, pmboxq);
+				pmboxq->mbox_cmpl = lpfc_hb_mbox_cmpl;
+				pmboxq->vport = phba->pport;
+				retval = lpfc_sli_issue_mbox(phba, pmboxq,
+						MBX_NOWAIT);
+
+				if (retval != MBX_BUSY &&
+					retval != MBX_SUCCESS) {
+					mempool_free(pmboxq,
+							phba->mbox_mem_pool);
+					mod_timer(&phba->hb_tmofunc,
+						jiffies +
+						HZ * LPFC_HB_MBOX_INTERVAL);
+					return;
+				}
+				phba->skipped_hb = 0;
+				phba->hb_outstanding = 1;
+			} else if (time_before_eq(phba->last_completion_time,
+					phba->skipped_hb)) {
+				lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"2857 Last completion time not "
+					" updated in %d ms\n",
+					jiffies_to_msecs(jiffies
+						 - phba->last_completion_time));
+			} else
+				phba->skipped_hb = jiffies;
 
-			if (retval != MBX_BUSY && retval != MBX_SUCCESS) {
-				mempool_free(pmboxq, phba->mbox_mem_pool);
-				mod_timer(&phba->hb_tmofunc,
-					  jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
-				return;
-			}
 			mod_timer(&phba->hb_tmofunc,
 				  jiffies + HZ * LPFC_HB_MBOX_TIMEOUT);
-			phba->hb_outstanding = 1;
 			return;
 		} else {
 			/*
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c818a72..2e51aa6 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1325,7 +1325,7 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
 	pde5->reftag = reftag;
 
-	/* Endian convertion if necessary for PDE5 */
+	/* Endianness conversion if necessary for PDE5 */
 	pde5->word0 = cpu_to_le32(pde5->word0);
 	pde5->reftag = cpu_to_le32(pde5->reftag);
 
@@ -1347,7 +1347,7 @@ lpfc_bg_setup_bpl(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 	bf_set(pde6_ai, pde6, 1);
 	bf_set(pde6_apptagval, pde6, apptagval);
 
-	/* Endian convertion if necessary for PDE6 */
+	/* Endianness conversion if necessary for PDE6 */
 	pde6->word0 = cpu_to_le32(pde6->word0);
 	pde6->word1 = cpu_to_le32(pde6->word1);
 	pde6->word2 = cpu_to_le32(pde6->word2);
@@ -1459,7 +1459,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		bf_set(pde5_type, pde5, LPFC_PDE5_DESCRIPTOR);
 		pde5->reftag = reftag;
 
-		/* Endian convertion if necessary for PDE5 */
+		/* Endianness conversion if necessary for PDE5 */
 		pde5->word0 = cpu_to_le32(pde5->word0);
 		pde5->reftag = cpu_to_le32(pde5->reftag);
 
@@ -1479,7 +1479,7 @@ lpfc_bg_setup_bpl_prot(struct lpfc_hba *phba, struct scsi_cmnd *sc,
 		bf_set(pde6_ai, pde6, 1);
 		bf_set(pde6_apptagval, pde6, apptagval);
 
-		/* Endian convertion if necessary for PDE6 */
+		/* Endianness conversion if necessary for PDE6 */
 		pde6->word0 = cpu_to_le32(pde6->word0);
 		pde6->word1 = cpu_to_le32(pde6->word1);
 		pde6->word2 = cpu_to_le32(pde6->word2);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index e758eae..0ce9eb7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1046,7 +1046,7 @@ lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 	} else
 		spin_unlock_irq(&phba->hbalock);
 
-	lpfc_printf_log(phba, KERN_ERR,LOG_SLI,
+	lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 			"0318 Failed to allocate IOTAG.last IOTAG is %d\n",
 			psli->last_iotag);
 
@@ -3914,7 +3914,8 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
 		phba->sli3_options &= ~(LPFC_SLI3_NPIV_ENABLED |
 					LPFC_SLI3_HBQ_ENABLED |
 					LPFC_SLI3_CRP_ENABLED |
-					LPFC_SLI3_BG_ENABLED);
+					LPFC_SLI3_BG_ENABLED |
+					LPFC_SLI3_DSS_ENABLED);
 		if (rc != MBX_SUCCESS) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0442 Adapter failed to init, mbxCmd x%x "
@@ -3949,8 +3950,23 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode)
 
 		} else
 			phba->max_vpi = 0;
-		if (pmb->u.mb.un.varCfgPort.gdss)
+		phba->fips_level = 0;
+		phba->fips_spec_rev = 0;
+		if (pmb->u.mb.un.varCfgPort.gdss) {
 			phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
+			phba->fips_level = pmb->u.mb.un.varCfgPort.fips_level;
+			phba->fips_spec_rev = pmb->u.mb.un.varCfgPort.fips_rev;
+			lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+					"2850 Security Crypto Active. FIPS x%d "
+					"(Spec Rev: x%d)",
+					phba->fips_level, phba->fips_spec_rev);
+		}
+		if (pmb->u.mb.un.varCfgPort.sec_err) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2856 Config Port Security Crypto "
+					"Error: x%x ",
+					pmb->u.mb.un.varCfgPort.sec_err);
+		}
 		if (pmb->u.mb.un.varCfgPort.gerbm)
 			phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
 		if (pmb->u.mb.un.varCfgPort.gcrp)
@@ -9040,6 +9056,7 @@ lpfc_sli4_sp_handle_cqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
 	switch (bf_get(lpfc_cqe_code, &cqevt)) {
 	case CQE_CODE_COMPL_WQE:
 		/* Process the WQ/RQ complete event */
+		phba->last_completion_time = jiffies;
 		workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
 				(struct lpfc_wcqe_complete *)&cqevt);
 		break;
@@ -9050,11 +9067,13 @@ lpfc_sli4_sp_handle_cqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
 		break;
 	case CQE_CODE_XRI_ABORTED:
 		/* Process the WQ XRI abort event */
+		phba->last_completion_time = jiffies;
 		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
 				(struct sli4_wcqe_xri_aborted *)&cqevt);
 		break;
 	case CQE_CODE_RECEIVE:
 		/* Process the RQ event */
+		phba->last_completion_time = jiffies;
 		workposted = lpfc_sli4_sp_handle_rcqe(phba,
 				(struct lpfc_rcqe *)&cqevt);
 		break;
@@ -9276,7 +9295,6 @@ lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
 {
 	struct lpfc_wcqe_release wcqe;
 	bool workposted = false;
-	unsigned long iflag;
 
 	/* Copy the work queue CQE and convert endian order if needed */
 	lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
@@ -9285,9 +9303,7 @@ lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
 	switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
 	case CQE_CODE_COMPL_WQE:
 		/* Process the WQ complete event */
-		spin_lock_irqsave(&phba->hbalock, iflag);
 		phba->last_completion_time = jiffies;
-		spin_unlock_irqrestore(&phba->hbalock, iflag);
 		lpfc_sli4_fp_handle_fcp_wcqe(phba,
 				(struct lpfc_wcqe_complete *)&wcqe);
 		break;
@@ -9298,6 +9314,7 @@ lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
 		break;
 	case CQE_CODE_XRI_ABORTED:
 		/* Process the WQ XRI abort event */
+		phba->last_completion_time = jiffies;
 		workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
 				(struct sli4_wcqe_xri_aborted *)&wcqe);
 		break;
-- 
cgit v1.1


From 38b92ef89b0d5a255f2f812c623fcdec4e63a21c Mon Sep 17 00:00:00 2001
From: James Smart <james.smart@emulex.com>
Date: Wed, 4 Aug 2010 16:11:39 -0400
Subject: [SCSI] lpfc 8.3.16: FCoE Discovery and Failover Fixes

- Add support for re-reg'ing changed VPI w/o unregister VPI
- Copy WWN and state from old nodelist when target DID change.
- Clean up old nodelist rport and put the nodelist when target DID change.
- Clear the VFI_REGISTERED flag when UNREG_VFI completes.
- Made both checks of port_state against LPFC_FLOGI and LPFC_FDISC
  non-inclusive for ignoring CVL events.
- Added logic to stop retrying of the ongoing PLOGI and FDISC if
  transitioned back to the FCF rediscovery state in reaction to CVL.
- Removed the dependency of scanning of all the available FCF table
  entries for bulding round-robin bitmap.
- Use the lpfc_sli4_fcf_rr_read_fcf_rec() in responding to
  individual New FCF found event.

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/lpfc/lpfc_els.c     | 76 +++++++++++++++++++++++++++++++++++---
 drivers/scsi/lpfc/lpfc_hbadisc.c | 15 ++++++--
 drivers/scsi/lpfc/lpfc_hw.h      |  6 ++-
 drivers/scsi/lpfc/lpfc_init.c    | 79 +++++++++++++++++++++++++---------------
 drivers/scsi/lpfc/lpfc_mbox.c    |  8 +++-
 drivers/scsi/lpfc/lpfc_sli.c     |  7 +---
 6 files changed, 144 insertions(+), 47 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index afbed6b..8d09191 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -600,6 +600,14 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
 			spin_unlock_irq(shost->host_lock);
 		}
+	} else if ((phba->sli_rev == LPFC_SLI_REV4) &&
+		!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
+			/*
+			 * Driver needs to re-reg VPI in order for f/w
+			 * to update the MAC address.
+			 */
+			lpfc_register_new_vport(phba, vport, ndlp);
+			return 0;
 	}
 
 	if (phba->sli_rev < LPFC_SLI_REV4) {
@@ -801,9 +809,12 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		    (irsp->un.ulpWord[4] != IOERR_SLI_ABORTED)) {
 			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP | LOG_ELS,
 					"2611 FLOGI failed on registered "
-					"FCF record fcf_index:%d, trying "
-					"to perform round robin failover\n",
-					phba->fcf.current_rec.fcf_indx);
+					"FCF record fcf_index(%d), status: "
+					"x%x/x%x, tmo:x%x, trying to perform "
+					"round robin failover\n",
+					phba->fcf.current_rec.fcf_indx,
+					irsp->ulpStatus, irsp->un.ulpWord[4],
+					irsp->ulpTimeout);
 			fcf_index = lpfc_sli4_fcf_rr_next_index_get(phba);
 			if (fcf_index == LPFC_FCOE_FCF_NEXT_NONE) {
 				/*
@@ -841,6 +852,12 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			}
 		}
 
+		/* FLOGI failure */
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				"2858 FLOGI failure Status:x%x/x%x TMO:x%x\n",
+				irsp->ulpStatus, irsp->un.ulpWord[4],
+				irsp->ulpTimeout);
+
 		/* Check for retry */
 		if (lpfc_els_retry(phba, cmdiocb, rspiocb))
 			goto out;
@@ -1291,6 +1308,8 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	struct serv_parm *sp;
 	uint8_t  name[sizeof(struct lpfc_name)];
 	uint32_t rc, keepDID = 0;
+	int  put_node;
+	int  put_rport;
 
 	/* Fabric nodes can have the same WWPN so we don't bother searching
 	 * by WWPN.  Just return the ndlp that was given to us.
@@ -1379,6 +1398,28 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 		/* Two ndlps cannot have the same did */
 		ndlp->nlp_DID = keepDID;
 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
+		/* Since we are swapping the ndlp passed in with the new one
+		 * and the did has already been swapped, copy over the
+		 * state and names.
+		 */
+		memcpy(&new_ndlp->nlp_portname, &ndlp->nlp_portname,
+			sizeof(struct lpfc_name));
+		memcpy(&new_ndlp->nlp_nodename, &ndlp->nlp_nodename,
+			sizeof(struct lpfc_name));
+		new_ndlp->nlp_state = ndlp->nlp_state;
+		/* Fix up the rport accordingly */
+		rport = ndlp->rport;
+		if (rport) {
+			rdata = rport->dd_data;
+			put_node = rdata->pnode != NULL;
+			put_rport = ndlp->rport != NULL;
+			rdata->pnode = NULL;
+			ndlp->rport = NULL;
+			if (put_node)
+				lpfc_nlp_put(ndlp);
+			if (put_rport)
+				put_device(&rport->dev);
+		}
 	}
 	return new_ndlp;
 }
@@ -2880,6 +2921,17 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		retry = 0;
 
 	if (retry) {
+		if ((cmd == ELS_CMD_PLOGI) || (cmd == ELS_CMD_FDISC)) {
+			/* Stop retrying PLOGI and FDISC if in FCF discovery */
+			if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
+				lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+						 "2849 Stop retry ELS command "
+						 "x%x to remote NPORT x%x, "
+						 "Data: x%x x%x\n", cmd, did,
+						 cmdiocb->retry, delay);
+				return 0;
+			}
+		}
 
 		/* Retry ELS command <elsCmd> to remote NPORT <did> */
 		lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
@@ -6076,8 +6128,12 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 
 	if (mb->mbxStatus) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
-				 "0915 Register VPI failed: 0x%x\n",
-				 mb->mbxStatus);
+				"0915 Register VPI failed : Status: x%x"
+				" upd bit: x%x \n", mb->mbxStatus,
+				 mb->un.varRegVpi.upd);
+		if (phba->sli_rev == LPFC_SLI_REV4 &&
+			mb->un.varRegVpi.upd)
+			goto mbox_err_exit ;
 
 		switch (mb->mbxStatus) {
 		case 0x11:	/* unsupported feature */
@@ -6142,7 +6198,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		} else
 			lpfc_do_scr_ns_plogi(phba, vport);
 	}
-
+mbox_err_exit:
 	/* Now, we decrement the ndlp reference count held for this
 	 * callback function
 	 */
@@ -6387,6 +6443,14 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		else
 			vport->fc_flag |= FC_LOGO_RCVD_DID_CHNG;
 		spin_unlock_irq(shost->host_lock);
+	} else if ((phba->sli_rev == LPFC_SLI_REV4) &&
+		!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
+		/*
+		 * Driver needs to re-reg VPI in order for f/w
+		 * to update the MAC address.
+		 */
+		lpfc_register_new_vport(phba, vport, ndlp);
+		return ;
 	}
 
 	if (vport->fc_flag & FC_VPORT_NEEDS_INIT_VPI)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index efba65b..1f62ea8 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1852,8 +1852,7 @@ lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 				__lpfc_sli4_stop_fcf_redisc_wait_timer(phba);
 			else if (phba->fcf.fcf_flag & FCF_REDISC_FOV)
 				/* If in fast failover, mark it's completed */
-				phba->fcf.fcf_flag &= ~(FCF_REDISC_FOV |
-							FCF_DISCOVERY);
+				phba->fcf.fcf_flag &= ~FCF_REDISC_FOV;
 			spin_unlock_irq(&phba->hbalock);
 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP,
 					"2836 The new FCF record (x%x) "
@@ -2651,7 +2650,6 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 		spin_unlock_irq(&phba->hbalock);
 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
 				"2778 Start FCF table scan at linkup\n");
-
 		rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba,
 						     LPFC_FCOE_FCF_GET_FIRST);
 		if (rc) {
@@ -2660,6 +2658,9 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 			spin_unlock_irq(&phba->hbalock);
 			goto out;
 		}
+		/* Reset FCF roundrobin bmask for new discovery */
+		memset(phba->fcf.fcf_rr_bmask, 0,
+		       sizeof(*phba->fcf.fcf_rr_bmask));
 	}
 
 	return;
@@ -5097,6 +5098,7 @@ static void
 lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 {
 	struct lpfc_vport *vport = mboxq->vport;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
 	if (mboxq->u.mb.mbxStatus) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
@@ -5104,6 +5106,9 @@ lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 			"HBA state x%x\n",
 			mboxq->u.mb.mbxStatus, vport->port_state);
 	}
+	spin_lock_irq(shost->host_lock);
+	phba->pport->fc_flag &= ~FC_VFI_REGISTERED;
+	spin_unlock_irq(shost->host_lock);
 	mempool_free(mboxq, phba->mbox_mem_pool);
 	return;
 }
@@ -5285,6 +5290,10 @@ lpfc_unregister_fcf_rescan(struct lpfc_hba *phba)
 	spin_lock_irq(&phba->hbalock);
 	phba->fcf.fcf_flag |= FCF_INIT_DISC;
 	spin_unlock_irq(&phba->hbalock);
+
+	/* Reset FCF roundrobin bmask for new discovery */
+	memset(phba->fcf.fcf_rr_bmask, 0, sizeof(*phba->fcf.fcf_rr_bmask));
+
 	rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba, LPFC_FCOE_FCF_GET_FIRST);
 
 	if (rc) {
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 897caa0..1676f61 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -2291,7 +2291,8 @@ typedef struct {
 typedef struct {
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t rsvd1;
-	uint32_t rsvd2:8;
+	uint32_t rsvd2:7;
+	uint32_t upd:1;
 	uint32_t sid:24;
 	uint32_t wwn[2];
 	uint32_t rsvd5;
@@ -2300,7 +2301,8 @@ typedef struct {
 #else	/*  __LITTLE_ENDIAN */
 	uint32_t rsvd1;
 	uint32_t sid:24;
-	uint32_t rsvd2:8;
+	uint32_t upd:1;
+	uint32_t rsvd2:7;
 	uint32_t wwn[2];
 	uint32_t rsvd5;
 	uint16_t vpi;
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 9244aa6..da9ba06 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3300,10 +3300,10 @@ lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport)
 		if (!ndlp)
 			return 0;
 	}
-	if (phba->pport->port_state <= LPFC_FLOGI)
+	if (phba->pport->port_state < LPFC_FLOGI)
 		return NULL;
 	/* If virtual link is not yet instantiated ignore CVL */
-	if (vport->port_state <= LPFC_FDISC)
+	if ((vport != phba->pport) && (vport->port_state < LPFC_FDISC))
 		return NULL;
 	shost = lpfc_shost_from_vport(vport);
 	if (!shost)
@@ -3376,21 +3376,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 					"evt_tag:x%x, fcf_index:x%x\n",
 					acqe_fcoe->event_tag,
 					acqe_fcoe->index);
-		/* If the FCF discovery is in progress, do nothing. */
-		spin_lock_irq(&phba->hbalock);
-		if (phba->hba_flag & FCF_DISC_INPROGRESS) {
-			spin_unlock_irq(&phba->hbalock);
-			break;
-		}
-		/* If fast FCF failover rescan event is pending, do nothing */
-		if (phba->fcf.fcf_flag & FCF_REDISC_EVT) {
-			spin_unlock_irq(&phba->hbalock);
-			break;
-		}
-		spin_unlock_irq(&phba->hbalock);
-
-		if ((phba->fcf.fcf_flag & FCF_DISCOVERY) &&
-		    !(phba->fcf.fcf_flag & FCF_REDISC_FOV)) {
+		if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
 			/*
 			 * During period of FCF discovery, read the FCF
 			 * table record indexed by the event to update
@@ -3404,13 +3390,26 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 					acqe_fcoe->index);
 			rc = lpfc_sli4_read_fcf_rec(phba, acqe_fcoe->index);
 		}
-		/* If the FCF has been in discovered state, do nothing. */
+
+		/* If the FCF discovery is in progress, do nothing. */
 		spin_lock_irq(&phba->hbalock);
+		if (phba->hba_flag & FCF_DISC_INPROGRESS) {
+			spin_unlock_irq(&phba->hbalock);
+			break;
+		}
+		/* If fast FCF failover rescan event is pending, do nothing */
+		if (phba->fcf.fcf_flag & FCF_REDISC_EVT) {
+			spin_unlock_irq(&phba->hbalock);
+			break;
+		}
+
+		/* If the FCF has been in discovered state, do nothing. */
 		if (phba->fcf.fcf_flag & FCF_SCAN_DONE) {
 			spin_unlock_irq(&phba->hbalock);
 			break;
 		}
 		spin_unlock_irq(&phba->hbalock);
+
 		/* Otherwise, scan the entire FCF table and re-discover SAN */
 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
 				"2770 Start FCF table scan due to new FCF "
@@ -3436,13 +3435,9 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 			"2549 FCF disconnected from network index 0x%x"
 			" tag 0x%x\n", acqe_fcoe->index,
 			acqe_fcoe->event_tag);
-		/* If the event is not for currently used fcf do nothing */
-		if (phba->fcf.current_rec.fcf_indx != acqe_fcoe->index)
-			break;
-		/* We request port to rediscover the entire FCF table for
-		 * a fast recovery from case that the current FCF record
-		 * is no longer valid if we are not in the middle of FCF
-		 * failover process already.
+		/*
+		 * If we are in the middle of FCF failover process, clear
+		 * the corresponding FCF bit in the roundrobin bitmap.
 		 */
 		spin_lock_irq(&phba->hbalock);
 		if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
@@ -3451,9 +3446,23 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 			lpfc_sli4_fcf_rr_index_clear(phba, acqe_fcoe->index);
 			break;
 		}
+		spin_unlock_irq(&phba->hbalock);
+
+		/* If the event is not for currently used fcf do nothing */
+		if (phba->fcf.current_rec.fcf_indx != acqe_fcoe->index)
+			break;
+
+		/*
+		 * Otherwise, request the port to rediscover the entire FCF
+		 * table for a fast recovery from case that the current FCF
+		 * is no longer valid as we are not in the middle of FCF
+		 * failover process already.
+		 */
+		spin_lock_irq(&phba->hbalock);
 		/* Mark the fast failover process in progress */
 		phba->fcf.fcf_flag |= FCF_DEAD_DISC;
 		spin_unlock_irq(&phba->hbalock);
+
 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
 				"2771 Start FCF fast failover process due to "
 				"FCF DEAD event: evt_tag:x%x, fcf_index:x%x "
@@ -3473,12 +3482,16 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 			 * as a link down to FCF registration.
 			 */
 			lpfc_sli4_fcf_dead_failthrough(phba);
-		} else
-			/* Handling fast FCF failover to a DEAD FCF event
-			 * is considered equalivant to receiving CVL to all
-			 * vports.
+		} else {
+			/* Reset FCF roundrobin bmask for new discovery */
+			memset(phba->fcf.fcf_rr_bmask, 0,
+			       sizeof(*phba->fcf.fcf_rr_bmask));
+			/*
+			 * Handling fast FCF failover to a DEAD FCF event is
+			 * considered equalivant to receiving CVL to all vports.
 			 */
 			lpfc_sli4_perform_all_vport_cvl(phba);
+		}
 		break;
 	case LPFC_FCOE_EVENT_TYPE_CVL:
 		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
@@ -3553,7 +3566,13 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 				 * the current registered FCF entry.
 				 */
 				lpfc_retry_pport_discovery(phba);
-			}
+			} else
+				/*
+				 * Reset FCF roundrobin bmask for new
+				 * discovery.
+				 */
+				memset(phba->fcf.fcf_rr_bmask, 0,
+				       sizeof(*phba->fcf.fcf_rr_bmask));
 		}
 		break;
 	default:
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 9c2c7c7..0dfa310 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -815,9 +815,15 @@ void
 lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb)
 {
 	MAILBOX_t *mb = &pmb->u.mb;
+	struct lpfc_hba *phba = vport->phba;
 
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
-
+	/*
+	 * Set the re-reg VPI bit for f/w to update the MAC address.
+	 */
+	if ((phba->sli_rev == LPFC_SLI_REV4) &&
+		!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI))
+		mb->un.varRegVpi.upd = 1;
 	mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base;
 	mb->un.varRegVpi.sid = vport->fc_myDID;
 	mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 0ce9eb7..fb8905f 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -12295,12 +12295,9 @@ lpfc_sli4_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, uint16_t fcf_index)
 		spin_lock_irq(&phba->hbalock);
 		phba->hba_flag |= FCF_DISC_INPROGRESS;
 		spin_unlock_irq(&phba->hbalock);
-		/* Reset FCF round robin index bmask for new scan */
-		if (fcf_index == LPFC_FCOE_FCF_GET_FIRST) {
-			memset(phba->fcf.fcf_rr_bmask, 0,
-			       sizeof(*phba->fcf.fcf_rr_bmask));
+		/* Reset eligible FCF count for new scan */
+		if (fcf_index == LPFC_FCOE_FCF_GET_FIRST)
 			phba->fcf.eligible_fcf_cnt = 0;
-		}
 		error = 0;
 	}
 fail_fcf_scan:
-- 
cgit v1.1


From 161155519c27773b8f35ee3d7a1b49acfc9eee73 Mon Sep 17 00:00:00 2001
From: James Smart <james.smart@emulex.com>
Date: Wed, 4 Aug 2010 16:12:12 -0400
Subject: [SCSI] lpfc 8.3.16: Change LPFC driver version to 8.3.16

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/lpfc/lpfc_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index d28830a..61afb34 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.15"
+#define LPFC_DRIVER_VERSION "8.3.16"
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
 #define LPFC_FP_DRIVER_HANDLER_NAME	"lpfc:fp"
-- 
cgit v1.1


From d5da3040d798df4bbb62579b97f8b6b83749da22 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Thu, 5 Aug 2010 16:38:31 -0500
Subject: [SCSI] ibmvfc: Fix rport add/delete race resulting in oops

Commit 43c8da907ccc656935d1085701f4db83385d8a59 introduced a race
condition which can occur when adding/deleting rports. There are
two possible threads now that can be deleting rports in the ibmvfc
driver, which can result in list_del being called twice, resulting
in an oops. This patch adds a new state to the ibmvfc_target struct
to indicate the target has been removed from the list and is in
the process of being deleted.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 8 ++++++++
 drivers/scsi/ibmvscsi/ibmvfc.h | 1 +
 2 files changed, 9 insertions(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index bd96cec..a13db59 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -433,6 +433,9 @@ static void ibmvfc_set_tgt_action(struct ibmvfc_target *tgt,
 {
 	switch (tgt->action) {
 	case IBMVFC_TGT_ACTION_DEL_RPORT:
+		if (action == IBMVFC_TGT_ACTION_DELETED_RPORT)
+			tgt->action = action;
+	case IBMVFC_TGT_ACTION_DELETED_RPORT:
 		break;
 	default:
 		if (action == IBMVFC_TGT_ACTION_DEL_RPORT)
@@ -4193,11 +4196,15 @@ static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
 	if (rport && tgt->action == IBMVFC_TGT_ACTION_DEL_RPORT) {
 		tgt_dbg(tgt, "Deleting rport\n");
 		list_del(&tgt->queue);
+		ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DELETED_RPORT);
 		spin_unlock_irqrestore(vhost->host->host_lock, flags);
 		fc_remote_port_delete(rport);
 		del_timer_sync(&tgt->timer);
 		kref_put(&tgt->kref, ibmvfc_release_tgt);
 		return;
+	} else if (rport && tgt->action == IBMVFC_TGT_ACTION_DELETED_RPORT) {
+		spin_unlock_irqrestore(vhost->host->host_lock, flags);
+		return;
 	}
 
 	if (rport) {
@@ -4297,6 +4304,7 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 				rport = tgt->rport;
 				tgt->rport = NULL;
 				list_del(&tgt->queue);
+				ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DELETED_RPORT);
 				spin_unlock_irqrestore(vhost->host->host_lock, flags);
 				if (rport)
 					fc_remote_port_delete(rport);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index d7e8dcd..af48172 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -597,6 +597,7 @@ enum ibmvfc_target_action {
 	IBMVFC_TGT_ACTION_INIT,
 	IBMVFC_TGT_ACTION_INIT_WAIT,
 	IBMVFC_TGT_ACTION_DEL_RPORT,
+	IBMVFC_TGT_ACTION_DELETED_RPORT,
 };
 
 struct ibmvfc_target {
-- 
cgit v1.1


From d2fab5cf3979c55f802c96616daf96e9e8de1c80 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Thu, 5 Aug 2010 16:38:34 -0500
Subject: [SCSI] ibmvfc: Fix terminate_rport_io

The ibmvfc driver was incorrectly obtaining a scsi_target pointer
from an fc_rport. The way it is coded ensures that ibmvfc's
terminate_rport_io handler does absolutely nothing. Fix this up
to iterate through affected devices differently, sending cancel
and abort task set as appropriate. Without this patch,
fast_io_fail_tmo is broken for ibmvfc.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 372 ++++++++++++++++++++++-------------------
 drivers/scsi/ibmvscsi/ibmvfc.h |   1 +
 2 files changed, 204 insertions(+), 169 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index a13db59..9f75a6d 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2039,95 +2039,108 @@ static int ibmvfc_reset_device(struct scsi_device *sdev, int type, char *desc)
 }
 
 /**
- * ibmvfc_abort_task_set - Abort outstanding commands to the device
- * @sdev:	scsi device to abort commands
- *
- * This sends an Abort Task Set to the VIOS for the specified device. This does
- * NOT send any cancel to the VIOS. That must be done separately.
+ * ibmvfc_match_rport - Match function for specified remote port
+ * @evt:	ibmvfc event struct
+ * @device:	device to match (rport)
  *
  * Returns:
- *	0 on success / other on failure
+ *	1 if event matches rport / 0 if event does not match rport
  **/
-static int ibmvfc_abort_task_set(struct scsi_device *sdev)
+static int ibmvfc_match_rport(struct ibmvfc_event *evt, void *rport)
 {
-	struct ibmvfc_host *vhost = shost_priv(sdev->host);
-	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
-	struct ibmvfc_cmd *tmf;
-	struct ibmvfc_event *evt, *found_evt;
-	union ibmvfc_iu rsp_iu;
-	struct ibmvfc_fcp_rsp *fc_rsp = &rsp_iu.cmd.rsp;
-	int rsp_rc = -EBUSY;
-	unsigned long flags;
-	int rsp_code = 0;
+	struct fc_rport *cmd_rport;
 
-	spin_lock_irqsave(vhost->host->host_lock, flags);
-	found_evt = NULL;
-	list_for_each_entry(evt, &vhost->sent, queue) {
-		if (evt->cmnd && evt->cmnd->device == sdev) {
-			found_evt = evt;
-			break;
-		}
-	}
-
-	if (!found_evt) {
-		if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
-			sdev_printk(KERN_INFO, sdev, "No events found to abort\n");
-		spin_unlock_irqrestore(vhost->host->host_lock, flags);
-		return 0;
-	}
-
-	if (vhost->state == IBMVFC_ACTIVE) {
-		evt = ibmvfc_get_event(vhost);
-		ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_CMD_FORMAT);
-
-		tmf = &evt->iu.cmd;
-		memset(tmf, 0, sizeof(*tmf));
-		tmf->resp.va = (u64)evt->crq.ioba + offsetof(struct ibmvfc_cmd, rsp);
-		tmf->resp.len = sizeof(tmf->rsp);
-		tmf->frame_type = IBMVFC_SCSI_FCP_TYPE;
-		tmf->payload_len = sizeof(tmf->iu);
-		tmf->resp_len = sizeof(tmf->rsp);
-		tmf->cancel_key = (unsigned long)sdev->hostdata;
-		tmf->tgt_scsi_id = rport->port_id;
-		int_to_scsilun(sdev->lun, &tmf->iu.lun);
-		tmf->flags = (IBMVFC_NO_MEM_DESC | IBMVFC_TMF);
-		tmf->iu.tmf_flags = IBMVFC_ABORT_TASK_SET;
-		evt->sync_iu = &rsp_iu;
-
-		init_completion(&evt->comp);
-		rsp_rc = ibmvfc_send_event(evt, vhost, default_timeout);
+	if (evt->cmnd) {
+		cmd_rport = starget_to_rport(scsi_target(evt->cmnd->device));
+		if (cmd_rport == rport)
+			return 1;
 	}
+	return 0;
+}
 
-	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+/**
+ * ibmvfc_match_target - Match function for specified target
+ * @evt:	ibmvfc event struct
+ * @device:	device to match (starget)
+ *
+ * Returns:
+ *	1 if event matches starget / 0 if event does not match starget
+ **/
+static int ibmvfc_match_target(struct ibmvfc_event *evt, void *device)
+{
+	if (evt->cmnd && scsi_target(evt->cmnd->device) == device)
+		return 1;
+	return 0;
+}
 
-	if (rsp_rc != 0) {
-		sdev_printk(KERN_ERR, sdev, "Failed to send abort. rc=%d\n", rsp_rc);
-		return -EIO;
-	}
+/**
+ * ibmvfc_match_lun - Match function for specified LUN
+ * @evt:	ibmvfc event struct
+ * @device:	device to match (sdev)
+ *
+ * Returns:
+ *	1 if event matches sdev / 0 if event does not match sdev
+ **/
+static int ibmvfc_match_lun(struct ibmvfc_event *evt, void *device)
+{
+	if (evt->cmnd && evt->cmnd->device == device)
+		return 1;
+	return 0;
+}
 
-	sdev_printk(KERN_INFO, sdev, "Aborting outstanding commands\n");
-	wait_for_completion(&evt->comp);
+/**
+ * ibmvfc_wait_for_ops - Wait for ops to complete
+ * @vhost:	ibmvfc host struct
+ * @device:	device to match (starget or sdev)
+ * @match:	match function
+ *
+ * Returns:
+ *	SUCCESS / FAILED
+ **/
+static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device,
+			       int (*match) (struct ibmvfc_event *, void *))
+{
+	struct ibmvfc_event *evt;
+	DECLARE_COMPLETION_ONSTACK(comp);
+	int wait;
+	unsigned long flags;
+	signed long timeout = IBMVFC_ABORT_WAIT_TIMEOUT * HZ;
 
-	if (rsp_iu.cmd.status)
-		rsp_code = ibmvfc_get_err_result(&rsp_iu.cmd);
+	ENTER;
+	do {
+		wait = 0;
+		spin_lock_irqsave(vhost->host->host_lock, flags);
+		list_for_each_entry(evt, &vhost->sent, queue) {
+			if (match(evt, device)) {
+				evt->eh_comp = &comp;
+				wait++;
+			}
+		}
+		spin_unlock_irqrestore(vhost->host->host_lock, flags);
 
-	if (rsp_code) {
-		if (fc_rsp->flags & FCP_RSP_LEN_VALID)
-			rsp_code = fc_rsp->data.info.rsp_code;
+		if (wait) {
+			timeout = wait_for_completion_timeout(&comp, timeout);
 
-		sdev_printk(KERN_ERR, sdev, "Abort failed: %s (%x:%x) "
-			    "flags: %x fcp_rsp: %x, scsi_status: %x\n",
-			    ibmvfc_get_cmd_error(rsp_iu.cmd.status, rsp_iu.cmd.error),
-			    rsp_iu.cmd.status, rsp_iu.cmd.error, fc_rsp->flags, rsp_code,
-			    fc_rsp->scsi_status);
-		rsp_rc = -EIO;
-	} else
-		sdev_printk(KERN_INFO, sdev, "Abort successful\n");
+			if (!timeout) {
+				wait = 0;
+				spin_lock_irqsave(vhost->host->host_lock, flags);
+				list_for_each_entry(evt, &vhost->sent, queue) {
+					if (match(evt, device)) {
+						evt->eh_comp = NULL;
+						wait++;
+					}
+				}
+				spin_unlock_irqrestore(vhost->host->host_lock, flags);
+				if (wait)
+					dev_err(vhost->dev, "Timed out waiting for aborted commands\n");
+				LEAVE;
+				return wait ? FAILED : SUCCESS;
+			}
+		}
+	} while (wait);
 
-	spin_lock_irqsave(vhost->host->host_lock, flags);
-	ibmvfc_free_event(evt);
-	spin_unlock_irqrestore(vhost->host->host_lock, flags);
-	return rsp_rc;
+	LEAVE;
+	return SUCCESS;
 }
 
 /**
@@ -2215,88 +2228,130 @@ static int ibmvfc_cancel_all(struct scsi_device *sdev, int type)
 }
 
 /**
- * ibmvfc_match_target - Match function for specified target
+ * ibmvfc_match_key - Match function for specified cancel key
  * @evt:	ibmvfc event struct
- * @device:	device to match (starget)
+ * @key:	cancel key to match
  *
  * Returns:
- *	1 if event matches starget / 0 if event does not match starget
+ *	1 if event matches key / 0 if event does not match key
  **/
-static int ibmvfc_match_target(struct ibmvfc_event *evt, void *device)
+static int ibmvfc_match_key(struct ibmvfc_event *evt, void *key)
 {
-	if (evt->cmnd && scsi_target(evt->cmnd->device) == device)
-		return 1;
-	return 0;
-}
+	unsigned long cancel_key = (unsigned long)key;
 
-/**
- * ibmvfc_match_lun - Match function for specified LUN
- * @evt:	ibmvfc event struct
- * @device:	device to match (sdev)
- *
- * Returns:
- *	1 if event matches sdev / 0 if event does not match sdev
- **/
-static int ibmvfc_match_lun(struct ibmvfc_event *evt, void *device)
-{
-	if (evt->cmnd && evt->cmnd->device == device)
+	if (evt->crq.format == IBMVFC_CMD_FORMAT &&
+	    evt->iu.cmd.cancel_key == cancel_key)
 		return 1;
 	return 0;
 }
 
 /**
- * ibmvfc_wait_for_ops - Wait for ops to complete
- * @vhost:	ibmvfc host struct
- * @device:	device to match (starget or sdev)
- * @match:	match function
+ * ibmvfc_abort_task_set - Abort outstanding commands to the device
+ * @sdev:	scsi device to abort commands
+ *
+ * This sends an Abort Task Set to the VIOS for the specified device. This does
+ * NOT send any cancel to the VIOS. That must be done separately.
  *
  * Returns:
- *	SUCCESS / FAILED
+ *	0 on success / other on failure
  **/
-static int ibmvfc_wait_for_ops(struct ibmvfc_host *vhost, void *device,
-			       int (*match) (struct ibmvfc_event *, void *))
+static int ibmvfc_abort_task_set(struct scsi_device *sdev)
 {
-	struct ibmvfc_event *evt;
-	DECLARE_COMPLETION_ONSTACK(comp);
-	int wait;
-	unsigned long flags;
-	signed long timeout = IBMVFC_ABORT_WAIT_TIMEOUT * HZ;
+	struct ibmvfc_host *vhost = shost_priv(sdev->host);
+	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+	struct ibmvfc_cmd *tmf;
+	struct ibmvfc_event *evt, *found_evt;
+	union ibmvfc_iu rsp_iu;
+	struct ibmvfc_fcp_rsp *fc_rsp = &rsp_iu.cmd.rsp;
+	int rc, rsp_rc = -EBUSY;
+	unsigned long flags, timeout = IBMVFC_ABORT_TIMEOUT;
+	int rsp_code = 0;
 
-	ENTER;
-	do {
-		wait = 0;
-		spin_lock_irqsave(vhost->host->host_lock, flags);
-		list_for_each_entry(evt, &vhost->sent, queue) {
-			if (match(evt, device)) {
-				evt->eh_comp = &comp;
-				wait++;
-			}
+	spin_lock_irqsave(vhost->host->host_lock, flags);
+	found_evt = NULL;
+	list_for_each_entry(evt, &vhost->sent, queue) {
+		if (evt->cmnd && evt->cmnd->device == sdev) {
+			found_evt = evt;
+			break;
 		}
+	}
+
+	if (!found_evt) {
+		if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL)
+			sdev_printk(KERN_INFO, sdev, "No events found to abort\n");
 		spin_unlock_irqrestore(vhost->host->host_lock, flags);
+		return 0;
+	}
 
-		if (wait) {
-			timeout = wait_for_completion_timeout(&comp, timeout);
+	if (vhost->state == IBMVFC_ACTIVE) {
+		evt = ibmvfc_get_event(vhost);
+		ibmvfc_init_event(evt, ibmvfc_sync_completion, IBMVFC_CMD_FORMAT);
 
-			if (!timeout) {
-				wait = 0;
-				spin_lock_irqsave(vhost->host->host_lock, flags);
-				list_for_each_entry(evt, &vhost->sent, queue) {
-					if (match(evt, device)) {
-						evt->eh_comp = NULL;
-						wait++;
-					}
-				}
-				spin_unlock_irqrestore(vhost->host->host_lock, flags);
-				if (wait)
-					dev_err(vhost->dev, "Timed out waiting for aborted commands\n");
-				LEAVE;
-				return wait ? FAILED : SUCCESS;
-			}
+		tmf = &evt->iu.cmd;
+		memset(tmf, 0, sizeof(*tmf));
+		tmf->resp.va = (u64)evt->crq.ioba + offsetof(struct ibmvfc_cmd, rsp);
+		tmf->resp.len = sizeof(tmf->rsp);
+		tmf->frame_type = IBMVFC_SCSI_FCP_TYPE;
+		tmf->payload_len = sizeof(tmf->iu);
+		tmf->resp_len = sizeof(tmf->rsp);
+		tmf->cancel_key = (unsigned long)sdev->hostdata;
+		tmf->tgt_scsi_id = rport->port_id;
+		int_to_scsilun(sdev->lun, &tmf->iu.lun);
+		tmf->flags = (IBMVFC_NO_MEM_DESC | IBMVFC_TMF);
+		tmf->iu.tmf_flags = IBMVFC_ABORT_TASK_SET;
+		evt->sync_iu = &rsp_iu;
+
+		init_completion(&evt->comp);
+		rsp_rc = ibmvfc_send_event(evt, vhost, default_timeout);
+	}
+
+	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+
+	if (rsp_rc != 0) {
+		sdev_printk(KERN_ERR, sdev, "Failed to send abort. rc=%d\n", rsp_rc);
+		return -EIO;
+	}
+
+	sdev_printk(KERN_INFO, sdev, "Aborting outstanding commands\n");
+	timeout = wait_for_completion_timeout(&evt->comp, timeout);
+
+	if (!timeout) {
+		rc = ibmvfc_cancel_all(sdev, IBMVFC_TMF_ABORT_TASK_SET);
+		if (!rc) {
+			rc = ibmvfc_wait_for_ops(vhost, sdev->hostdata, ibmvfc_match_key);
+			if (rc == SUCCESS)
+				rc = 0;
 		}
-	} while (wait);
 
-	LEAVE;
-	return SUCCESS;
+		if (rc) {
+			sdev_printk(KERN_INFO, sdev, "Cancel failed, resetting host\n");
+			ibmvfc_reset_host(vhost);
+			rsp_rc = 0;
+			goto out;
+		}
+	}
+
+	if (rsp_iu.cmd.status)
+		rsp_code = ibmvfc_get_err_result(&rsp_iu.cmd);
+
+	if (rsp_code) {
+		if (fc_rsp->flags & FCP_RSP_LEN_VALID)
+			rsp_code = fc_rsp->data.info.rsp_code;
+
+		sdev_printk(KERN_ERR, sdev, "Abort failed: %s (%x:%x) "
+			    "flags: %x fcp_rsp: %x, scsi_status: %x\n",
+			    ibmvfc_get_cmd_error(rsp_iu.cmd.status, rsp_iu.cmd.error),
+			    rsp_iu.cmd.status, rsp_iu.cmd.error, fc_rsp->flags, rsp_code,
+			    fc_rsp->scsi_status);
+		rsp_rc = -EIO;
+	} else
+		sdev_printk(KERN_INFO, sdev, "Abort successful\n");
+
+out:
+	spin_lock_irqsave(vhost->host->host_lock, flags);
+	ibmvfc_free_event(evt);
+	spin_unlock_irqrestore(vhost->host->host_lock, flags);
+	return rsp_rc;
 }
 
 /**
@@ -2354,18 +2409,6 @@ static int ibmvfc_eh_device_reset_handler(struct scsi_cmnd *cmd)
 }
 
 /**
- * ibmvfc_dev_cancel_all_abts - Device iterated cancel all function
- * @sdev:	scsi device struct
- * @data:	return code
- *
- **/
-static void ibmvfc_dev_cancel_all_abts(struct scsi_device *sdev, void *data)
-{
-	unsigned long *rc = data;
-	*rc |= ibmvfc_cancel_all(sdev, IBMVFC_TMF_ABORT_TASK_SET);
-}
-
-/**
  * ibmvfc_dev_cancel_all_reset - Device iterated cancel all function
  * @sdev:	scsi device struct
  * @data:	return code
@@ -2378,18 +2421,6 @@ static void ibmvfc_dev_cancel_all_reset(struct scsi_device *sdev, void *data)
 }
 
 /**
- * ibmvfc_dev_abort_all - Device iterated abort task set function
- * @sdev:	scsi device struct
- * @data:	return code
- *
- **/
-static void ibmvfc_dev_abort_all(struct scsi_device *sdev, void *data)
-{
-	unsigned long *rc = data;
-	*rc |= ibmvfc_abort_task_set(sdev);
-}
-
-/**
  * ibmvfc_eh_target_reset_handler - Reset the target
  * @cmd:	scsi command struct
  *
@@ -2443,19 +2474,22 @@ static int ibmvfc_eh_host_reset_handler(struct scsi_cmnd *cmd)
  **/
 static void ibmvfc_terminate_rport_io(struct fc_rport *rport)
 {
-	struct scsi_target *starget = to_scsi_target(&rport->dev);
-	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+	struct Scsi_Host *shost = rport_to_shost(rport);
 	struct ibmvfc_host *vhost = shost_priv(shost);
-	unsigned long cancel_rc = 0;
-	unsigned long abort_rc = 0;
-	int rc = FAILED;
+	struct fc_rport *dev_rport;
+	struct scsi_device *sdev;
+	unsigned long rc;
 
 	ENTER;
-	starget_for_each_device(starget, &cancel_rc, ibmvfc_dev_cancel_all_abts);
-	starget_for_each_device(starget, &abort_rc, ibmvfc_dev_abort_all);
+	shost_for_each_device(sdev, shost) {
+		dev_rport = starget_to_rport(scsi_target(sdev));
+		if (dev_rport != rport)
+			continue;
+		ibmvfc_cancel_all(sdev, IBMVFC_TMF_ABORT_TASK_SET);
+		ibmvfc_abort_task_set(sdev);
+	}
 
-	if (!cancel_rc && !abort_rc)
-		rc = ibmvfc_wait_for_ops(vhost, starget, ibmvfc_match_target);
+	rc = ibmvfc_wait_for_ops(vhost, rport, ibmvfc_match_rport);
 
 	if (rc == FAILED)
 		ibmvfc_issue_fc_host_lip(shost);
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index af48172..d47cefc 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -38,6 +38,7 @@
 #define IBMVFC_ADISC_PLUS_CANCEL_TIMEOUT	\
 		(IBMVFC_ADISC_TIMEOUT + IBMVFC_ADISC_CANCEL_TIMEOUT)
 #define IBMVFC_INIT_TIMEOUT		120
+#define IBMVFC_ABORT_TIMEOUT		8
 #define IBMVFC_ABORT_WAIT_TIMEOUT	40
 #define IBMVFC_MAX_REQUESTS_DEFAULT	100
 
-- 
cgit v1.1


From 7e41dfdaf11a45ab4f4dfc444a7d42bf79dd9356 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Thu, 5 Aug 2010 16:38:36 -0500
Subject: [SCSI] ibmvfc: Driver version 1.0.9

Bump driver version.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/ibmvscsi/ibmvfc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index d47cefc..608af39 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
 #include "viosrp.h"
 
 #define IBMVFC_NAME	"ibmvfc"
-#define IBMVFC_DRIVER_VERSION		"1.0.8"
-#define IBMVFC_DRIVER_DATE		"(June 17, 2010)"
+#define IBMVFC_DRIVER_VERSION		"1.0.9"
+#define IBMVFC_DRIVER_DATE		"(August 5, 2010)"
 
 #define IBMVFC_DEFAULT_TIMEOUT	60
 #define IBMVFC_ADISC_CANCEL_TIMEOUT	45
-- 
cgit v1.1


From 3eb3a92851857e6de92ad0c57bf7046ac4f58671 Mon Sep 17 00:00:00 2001
From: Hannes Reinecke <hare@suse.de>
Date: Thu, 29 Jul 2010 10:10:16 +0200
Subject: [SCSI] Return NEEDS_RETRY for eh commands with status BUSY

When the transport is busy and we're sending an EH command drivers
occasionally return 'BUSY'. As this in most cases is the TUR
command sent as part of the error recovery this is a sure way
to make the error recovery escalate. Returning 'NEEDS_RETRY'
here will just retry the TUR command and eventually abort the
original command, thus making error handling far smoother.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/scsi_error.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 2bf9846..cfd01ef 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -481,6 +481,7 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
 		scsi_handle_queue_full(scmd->device);
 		/* fall through */
 	case BUSY:
+		return NEEDS_RETRY;
 	default:
 		return FAILED;
 	}
-- 
cgit v1.1


From 3deee42088ddcf5b23021aa089b53444797e565d Mon Sep 17 00:00:00 2001
From: Joe Eykholt <jeykholt@cisco.com>
Date: Thu, 5 Aug 2010 17:50:37 -0700
Subject: [SCSI] tgt: fix warning

Using scsi_tgt_lib in a new target module, we were getting
the following warning and a stack traceback on every I/O completion:

WARNING: at block/blk-core.c:1108

Which is claiming we may be leaking a bio.
We don't leak bios (blk_rq_unmap_user should free them).

Set rq->bio to NULL before calling scsi_host_put_command().
This was as advised by Fujita Tomonori.

Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/scsi_tgt_lib.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index 66241dd..c399be9 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -185,6 +185,7 @@ static void scsi_tgt_cmd_destroy(struct work_struct *work)
 	dprintk("cmd %p %d %u\n", cmd, cmd->sc_data_direction,
 		rq_data_dir(cmd->request));
 	scsi_unmap_user_pages(tcmd);
+	tcmd->rq->bio = NULL;
 	scsi_host_put_command(scsi_tgt_cmd_to_host(cmd), cmd);
 }
 
-- 
cgit v1.1


From 67110dfd45442e70753c575cf0509eaed237b749 Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@suse.de>
Date: Fri, 6 Aug 2010 15:17:24 -0500
Subject: [SCSI] make error handling more robust in the face of reservations

commit 5f91bb050ecc4ff1d8d3d07edbe550c8f431c5e1
Author: Michael Reed <mdr@sgi.com>
Date:   Mon Aug 10 11:59:28 2009 -0500

    [SCSI] reservation conflict after timeout causes device to be taken offline

Flipped us from always returning failed to always returning success in
the name of fixing the problem where reservation conflict returns from
test unit ready cause the device always to be taken offline.
Unfortuantely, it also introduced a problem whereby for commands other
than test unit ready, the eh dispatcher thinks they succeeded when
reservation conflict is returned, whereas in reality they failed.  Fix
this by only returning success for the test unit ready case.

Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/scsi_error.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index cfd01ef..0bd8838 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -473,10 +473,12 @@ static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
 		 */
 		return SUCCESS;
 	case RESERVATION_CONFLICT:
-		/*
-		 * let issuer deal with this, it could be just fine
-		 */
-		return SUCCESS;
+		if (scmd->cmnd[0] == TEST_UNIT_READY)
+			/* it is a success, we probed the device and
+			 * found it */
+			return SUCCESS;
+		/* otherwise, we failed to send the command */
+		return FAILED;
 	case QUEUE_FULL:
 		scsi_handle_queue_full(scmd->device);
 		/* fall through */
-- 
cgit v1.1


From 3c3e210877e89aa3bfbda22551876986c035c433 Mon Sep 17 00:00:00 2001
From: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Date: Mon, 9 Aug 2010 05:14:07 -0700
Subject: [SCSI] qla4xxx: fix compilation warning

Fix following warning:

drivers/scsi/qla4xxx/ql4_nx.c: In function 'qla4_8xxx_get_flash_info':
drivers/scsi/qla4xxx/ql4_nx.c:1952: warning: 'mid' may be used uninitialized in this function
drivers/scsi/qla4xxx/ql4_nx.c:1952: note: 'mid' was declared here
drivers/scsi/qla4xxx/ql4_nx.c:1952: warning: 'fid' may be used uninitialized in this function
drivers/scsi/qla4xxx/ql4_nx.c:1952: note: 'fid' was declared here

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla4xxx/ql4_nx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/scsi')

diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 1b85235..e031a73 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -1953,7 +1953,8 @@ qla4_8xxx_get_fdt_info(struct scsi_qla_host *ha)
 	uint16_t cnt, chksum;
 	uint16_t *wptr;
 	struct qla_fdt_layout *fdt;
-	uint16_t mid, fid;
+	uint16_t mid = 0;
+	uint16_t fid = 0;
 	struct ql82xx_hw_data *hw = &ha->hw;
 
 	hw->flash_conf_off = FARX_ACCESS_FLASH_CONF;
-- 
cgit v1.1