From d61cca60aa79aa5afde29e37e26aff819e5b2f16 Mon Sep 17 00:00:00 2001 From: Sawan Chandak Date: Wed, 23 Aug 2017 15:05:24 -0700 Subject: scsi: qla2xxx: Do not call abort handler function during chip reset If there are IO's running and host reset or chip reset is triggered, IO's can fail due to rport time out. During chip reset recovery process, driver notifies the transport layer that remote port no longer exist, by calling fc_remote_port_delete(). When this function is called, it actually delays deletion by "blocking" it. It sets the remote port state to "FC_PORTSTATE_BLOCKED" and sets FC_RPORT_DEVLOSS_PENDING. When driver tries to abort the command by calling its abort handler function, abort handler will wait until remote port state is blocked state or wait for dev_loss_tmo time. Due to this blocking, rport times out and results in an IO failure. This patch adds a check for any active reset process before calling abort handler function. [mkp: typo] Signed-off-by: Sawan Chandak Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/scsi/qla2xxx') diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 715427f..56bd086 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1732,6 +1732,8 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) &ha->hardware_lock, flags); } else if (GET_CMD_SP(sp) && !ha->flags.eeh_busy && + (!test_bit(ABORT_ISP_ACTIVE, + &vha->dpc_flags)) && (sp->type == SRB_SCSI_CMD)) { /* * Don't abort commands in -- cgit v1.1