From 20b09c2992fefbe78f8cede7b404fb143a413c52 Mon Sep 17 00:00:00 2001 From: Andy Yan Date: Fri, 8 May 2009 17:46:40 -0400 Subject: [SCSI] mvsas: add support for 94xx; layout change; bug fixes This version contains following main changes - Switch to new layout to support more types of ASIC. - SSP TMF supported and related Error Handing enhanced. - Support flash feature with delay 2*HZ when PHY changed. - Support Marvell 94xx series ASIC for 6G SAS/SATA, which has 2 88SE64xx chips but any different register description. - Support SPI flash for HBA-related configuration info. - Other patch enhanced from kernel side such as increasing PHY type [jejb: fold back in DMA_BIT_MASK changes] Signed-off-by: Ying Chu Signed-off-by: Andy Yan Signed-off-by: Ke Wei Signed-off-by: Jeff Garzik Signed-off-by: James Bottomley --- drivers/scsi/mvsas/mv_94xx.h | 222 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 222 insertions(+) create mode 100644 drivers/scsi/mvsas/mv_94xx.h (limited to 'drivers/scsi/mvsas/mv_94xx.h') diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h new file mode 100644 index 0000000..23ed9b1 --- /dev/null +++ b/drivers/scsi/mvsas/mv_94xx.h @@ -0,0 +1,222 @@ +/* + * Marvell 88SE94xx hardware specific head file + * + * Copyright 2007 Red Hat, Inc. + * Copyright 2008 Marvell. + * + * This file is licensed under GPLv2. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA +*/ + +#ifndef _MVS94XX_REG_H_ +#define _MVS94XX_REG_H_ + +#include + +#define MAX_LINK_RATE SAS_LINK_RATE_6_0_GBPS + +enum hw_registers { + MVS_GBL_CTL = 0x04, /* global control */ + MVS_GBL_INT_STAT = 0x00, /* global irq status */ + MVS_GBL_PI = 0x0C, /* ports implemented bitmask */ + + MVS_PHY_CTL = 0x40, /* SOC PHY Control */ + MVS_PORTS_IMP = 0x9C, /* SOC Port Implemented */ + + MVS_GBL_PORT_TYPE = 0xa0, /* port type */ + + MVS_CTL = 0x100, /* SAS/SATA port configuration */ + MVS_PCS = 0x104, /* SAS/SATA port control/status */ + MVS_CMD_LIST_LO = 0x108, /* cmd list addr */ + MVS_CMD_LIST_HI = 0x10C, + MVS_RX_FIS_LO = 0x110, /* RX FIS list addr */ + MVS_RX_FIS_HI = 0x114, + MVS_STP_REG_SET_0 = 0x118, /* STP/SATA Register Set Enable */ + MVS_STP_REG_SET_1 = 0x11C, + MVS_TX_CFG = 0x120, /* TX configuration */ + MVS_TX_LO = 0x124, /* TX (delivery) ring addr */ + MVS_TX_HI = 0x128, + + MVS_TX_PROD_IDX = 0x12C, /* TX producer pointer */ + MVS_TX_CONS_IDX = 0x130, /* TX consumer pointer (RO) */ + MVS_RX_CFG = 0x134, /* RX configuration */ + MVS_RX_LO = 0x138, /* RX (completion) ring addr */ + MVS_RX_HI = 0x13C, + MVS_RX_CONS_IDX = 0x140, /* RX consumer pointer (RO) */ + + MVS_INT_COAL = 0x148, /* Int coalescing config */ + MVS_INT_COAL_TMOUT = 0x14C, /* Int coalescing timeout */ + MVS_INT_STAT = 0x150, /* Central int status */ + MVS_INT_MASK = 0x154, /* Central int enable */ + MVS_INT_STAT_SRS_0 = 0x158, /* SATA register set status */ + MVS_INT_MASK_SRS_0 = 0x15C, + MVS_INT_STAT_SRS_1 = 0x160, + MVS_INT_MASK_SRS_1 = 0x164, + MVS_NON_NCQ_ERR_0 = 0x168, /* SRS Non-specific NCQ Error */ + MVS_NON_NCQ_ERR_1 = 0x16C, + MVS_CMD_ADDR = 0x170, /* Command register port (addr) */ + MVS_CMD_DATA = 0x174, /* Command register port (data) */ + MVS_MEM_PARITY_ERR = 0x178, /* Memory parity error */ + + /* ports 1-3 follow after this */ + MVS_P0_INT_STAT = 0x180, /* port0 interrupt status */ + MVS_P0_INT_MASK = 0x184, /* port0 interrupt mask */ + /* ports 5-7 follow after this */ + MVS_P4_INT_STAT = 0x1A0, /* Port4 interrupt status */ + MVS_P4_INT_MASK = 0x1A4, /* Port4 interrupt enable mask */ + + /* ports 1-3 follow after this */ + MVS_P0_SER_CTLSTAT = 0x1D0, /* port0 serial control/status */ + /* ports 5-7 follow after this */ + MVS_P4_SER_CTLSTAT = 0x1E0, /* port4 serial control/status */ + + /* ports 1-3 follow after this */ + MVS_P0_CFG_ADDR = 0x200, /* port0 phy register address */ + MVS_P0_CFG_DATA = 0x204, /* port0 phy register data */ + /* ports 5-7 follow after this */ + MVS_P4_CFG_ADDR = 0x220, /* Port4 config address */ + MVS_P4_CFG_DATA = 0x224, /* Port4 config data */ + + /* phys 1-3 follow after this */ + MVS_P0_VSR_ADDR = 0x250, /* phy0 VSR address */ + MVS_P0_VSR_DATA = 0x254, /* phy0 VSR data */ + /* phys 1-3 follow after this */ + /* multiplexing */ + MVS_P4_VSR_ADDR = 0x250, /* phy4 VSR address */ + MVS_P4_VSR_DATA = 0x254, /* phy4 VSR data */ + MVS_PA_VSR_ADDR = 0x290, /* All port VSR addr */ + MVS_PA_VSR_PORT = 0x294, /* All port VSR data */ +}; + +enum pci_cfg_registers { + PCR_PHY_CTL = 0x40, + PCR_PHY_CTL2 = 0x90, + PCR_DEV_CTRL = 0x78, + PCR_LINK_STAT = 0x82, +}; + +/* SAS/SATA Vendor Specific Port Registers */ +enum sas_sata_vsp_regs { + VSR_PHY_STAT = 0x00 * 4, /* Phy Status */ + VSR_PHY_MODE1 = 0x01 * 4, /* phy tx */ + VSR_PHY_MODE2 = 0x02 * 4, /* tx scc */ + VSR_PHY_MODE3 = 0x03 * 4, /* pll */ + VSR_PHY_MODE4 = 0x04 * 4, /* VCO */ + VSR_PHY_MODE5 = 0x05 * 4, /* Rx */ + VSR_PHY_MODE6 = 0x06 * 4, /* CDR */ + VSR_PHY_MODE7 = 0x07 * 4, /* Impedance */ + VSR_PHY_MODE8 = 0x08 * 4, /* Voltage */ + VSR_PHY_MODE9 = 0x09 * 4, /* Test */ + VSR_PHY_MODE10 = 0x0A * 4, /* Power */ + VSR_PHY_MODE11 = 0x0B * 4, /* Phy Mode */ + VSR_PHY_VS0 = 0x0C * 4, /* Vednor Specific 0 */ + VSR_PHY_VS1 = 0x0D * 4, /* Vednor Specific 1 */ +}; + +enum chip_register_bits { + PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8), + PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8), + PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (12), + PHY_NEG_SPP_PHYS_LINK_RATE_MASK = + (0x3 << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET), +}; + +enum pci_interrupt_cause { + /* MAIN_IRQ_CAUSE (R10200) Bits*/ + IRQ_COM_IN_I2O_IOP0 = (1 << 0), + IRQ_COM_IN_I2O_IOP1 = (1 << 1), + IRQ_COM_IN_I2O_IOP2 = (1 << 2), + IRQ_COM_IN_I2O_IOP3 = (1 << 3), + IRQ_COM_OUT_I2O_HOS0 = (1 << 4), + IRQ_COM_OUT_I2O_HOS1 = (1 << 5), + IRQ_COM_OUT_I2O_HOS2 = (1 << 6), + IRQ_COM_OUT_I2O_HOS3 = (1 << 7), + IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8), + IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9), + IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10), + IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11), + IRQ_PCIF_DRBL0 = (1 << 12), + IRQ_PCIF_DRBL1 = (1 << 13), + IRQ_PCIF_DRBL2 = (1 << 14), + IRQ_PCIF_DRBL3 = (1 << 15), + IRQ_XOR_A = (1 << 16), + IRQ_XOR_B = (1 << 17), + IRQ_SAS_A = (1 << 18), + IRQ_SAS_B = (1 << 19), + IRQ_CPU_CNTRL = (1 << 20), + IRQ_GPIO = (1 << 21), + IRQ_UART = (1 << 22), + IRQ_SPI = (1 << 23), + IRQ_I2C = (1 << 24), + IRQ_SGPIO = (1 << 25), + IRQ_COM_ERR = (1 << 29), + IRQ_I2O_ERR = (1 << 30), + IRQ_PCIE_ERR = (1 << 31), +}; + +#define MAX_SG_ENTRY 255 + +struct mvs_prd_imt { + __le32 len:22; + u8 _r_a:2; + u8 misc_ctl:4; + u8 inter_sel:4; +}; + +struct mvs_prd { + /* 64-bit buffer address */ + __le64 addr; + /* 22-bit length */ + struct mvs_prd_imt im_len; +} __attribute__ ((packed)); + +#define SPI_CTRL_REG_94XX 0xc800 +#define SPI_ADDR_REG_94XX 0xc804 +#define SPI_WR_DATA_REG_94XX 0xc808 +#define SPI_RD_DATA_REG_94XX 0xc80c +#define SPI_CTRL_READ_94XX (1U << 2) +#define SPI_ADDR_VLD_94XX (1U << 1) +#define SPI_CTRL_SpiStart_94XX (1U << 0) + +#define mv_ffc(x) ffz(x) + +static inline int +mv_ffc64(u64 v) +{ + int i; + i = mv_ffc((u32)v); + if (i >= 0) + return i; + i = mv_ffc((u32)(v>>32)); + + if (i != 0) + return 32 + i; + + return -1; +} + +#define r_reg_set_enable(i) \ + (((i) > 31) ? mr32(MVS_STP_REG_SET_1) : \ + mr32(MVS_STP_REG_SET_0)) + +#define w_reg_set_enable(i, tmp) \ + (((i) > 31) ? mw32(MVS_STP_REG_SET_1, tmp) : \ + mw32(MVS_STP_REG_SET_0, tmp)) + +extern const struct mvs_dispatch mvs_94xx_dispatch; +#endif + -- cgit v1.1