From ab56dc2e1d32556971e0729b3a6c37e0ff3104a6 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 16 Feb 2011 12:39:57 -0500 Subject: [SCSI] lpfc 8.3.21: Initialization and user interface changes - Make link speed not supported by port message an error message. - Add support for new SLI failure codes add sysfs parameter to reflect the security setting and current state. - Add all lpfc module parameters to the /sys/modules/lpfc/parameters directory. [jejb: fix up compile failure] Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_debugfs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/scsi/lpfc/lpfc_debugfs.c') diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index a80d938..3c8c91a 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -82,23 +82,23 @@ * the HBA. X MUST also be a power of 2. */ static int lpfc_debugfs_enable = 1; -module_param(lpfc_debugfs_enable, int, 0); +module_param(lpfc_debugfs_enable, int, S_IRUGO); MODULE_PARM_DESC(lpfc_debugfs_enable, "Enable debugfs services"); /* This MUST be a power of 2 */ static int lpfc_debugfs_max_disc_trc; -module_param(lpfc_debugfs_max_disc_trc, int, 0); +module_param(lpfc_debugfs_max_disc_trc, int, S_IRUGO); MODULE_PARM_DESC(lpfc_debugfs_max_disc_trc, "Set debugfs discovery trace depth"); /* This MUST be a power of 2 */ static int lpfc_debugfs_max_slow_ring_trc; -module_param(lpfc_debugfs_max_slow_ring_trc, int, 0); +module_param(lpfc_debugfs_max_slow_ring_trc, int, S_IRUGO); MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc, "Set debugfs slow ring trace depth"); static int lpfc_debugfs_mask_disc_trc; -module_param(lpfc_debugfs_mask_disc_trc, int, 0); +module_param(lpfc_debugfs_mask_disc_trc, int, S_IRUGO); MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, "Set debugfs discovery trace mask"); -- cgit v1.1 From 2a622bfbe1d95664ecd4bc1cfe6dacf4788dfc10 Mon Sep 17 00:00:00 2001 From: James Smart Date: Wed, 16 Feb 2011 12:40:06 -0500 Subject: [SCSI] lpfc 8.3.21: Debugfs additions - Add the driver debugfs framework for supporting debugfs read and write operations, and iDiag command structure. - Add read and write to SLI4 device PCI config space registers. - Add the driver support of debugfs PCI config space register bits set/clear methods to the provided bitmask. - Add iDiag driver support for SLI4 device queue diagnostic. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_debugfs.c | 954 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 902 insertions(+), 52 deletions(-) (limited to 'drivers/scsi/lpfc/lpfc_debugfs.c') diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 3c8c91a..a753581 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1,7 +1,7 @@ /******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * - * Copyright (C) 2007-2009 Emulex. All rights reserved. * + * Copyright (C) 2007-2011 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.emulex.com * * * @@ -57,8 +57,8 @@ * # mount -t debugfs none /sys/kernel/debug * * The lpfc debugfs directory hierarchy is: - * lpfc/lpfcX/vportY - * where X is the lpfc hba unique_id + * /sys/kernel/debug/lpfc/fnX/vportY + * where X is the lpfc hba function unique_id * where Y is the vport VPI on that hba * * Debugging services available per vport: @@ -104,30 +104,12 @@ MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc, #include -/* size of output line, for discovery_trace and slow_ring_trace */ -#define LPFC_DEBUG_TRC_ENTRY_SIZE 100 - -/* nodelist output buffer size */ -#define LPFC_NODELIST_SIZE 8192 -#define LPFC_NODELIST_ENTRY_SIZE 120 - -/* dumpHBASlim output buffer size */ -#define LPFC_DUMPHBASLIM_SIZE 4096 - -/* dumpHostSlim output buffer size */ -#define LPFC_DUMPHOSTSLIM_SIZE 4096 - -/* hbqinfo output buffer size */ -#define LPFC_HBQINFO_SIZE 8192 - -struct lpfc_debug { - char *buffer; - int len; -}; - static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0); static unsigned long lpfc_debugfs_start_time = 0L; +/* iDiag */ +static struct lpfc_idiag idiag; + /** * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer * @vport: The vport to gather the log info from. @@ -996,8 +978,6 @@ lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf, return nbytes; } - - /** * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file * @inode: The inode pointer that contains a vport pointer. @@ -1099,6 +1079,7 @@ lpfc_debugfs_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) { struct lpfc_debug *debug = file->private_data; + return simple_read_from_buffer(buf, nbytes, ppos, debug->buffer, debug->len); } @@ -1137,6 +1118,776 @@ lpfc_debugfs_dumpDataDif_release(struct inode *inode, struct file *file) return 0; } +/* + * iDiag debugfs file access methods + */ + +/* + * iDiag PCI config space register access methods: + * + * The PCI config space register accessees of read, write, read-modify-write + * for set bits, and read-modify-write for clear bits to SLI4 PCI functions + * are provided. In the proper SLI4 PCI function's debugfs iDiag directory, + * + * /sys/kernel/debug/lpfc/fn<#>/iDiag + * + * the access is through the debugfs entry pciCfg: + * + * 1. For PCI config space register read access, there are two read methods: + * A) read a single PCI config space register in the size of a byte + * (8 bits), a word (16 bits), or a dword (32 bits); or B) browse through + * the 4K extended PCI config space. + * + * A) Read a single PCI config space register consists of two steps: + * + * Step-1: Set up PCI config space register read command, the command + * syntax is, + * + * echo 1 > pciCfg + * + * where, 1 is the iDiag command for PCI config space read, is the + * offset from the beginning of the device's PCI config space to read from, + * and is the size of PCI config space register data to read back, + * it will be 1 for reading a byte (8 bits), 2 for reading a word (16 bits + * or 2 bytes), or 4 for reading a dword (32 bits or 4 bytes). + * + * Setp-2: Perform the debugfs read operation to execute the idiag command + * set up in Step-1, + * + * cat pciCfg + * + * Examples: + * To read PCI device's vendor-id and device-id from PCI config space, + * + * echo 1 0 4 > pciCfg + * cat pciCfg + * + * To read PCI device's currnt command from config space, + * + * echo 1 4 2 > pciCfg + * cat pciCfg + * + * B) Browse through the entire 4K extended PCI config space also consists + * of two steps: + * + * Step-1: Set up PCI config space register browsing command, the command + * syntax is, + * + * echo 1 0 4096 > pciCfg + * + * where, 1 is the iDiag command for PCI config space read, 0 must be used + * as the offset for PCI config space register browse, and 4096 must be + * used as the count for PCI config space register browse. + * + * Step-2: Repeately issue the debugfs read operation to browse through + * the entire PCI config space registers: + * + * cat pciCfg + * cat pciCfg + * cat pciCfg + * ... + * + * When browsing to the end of the 4K PCI config space, the browse method + * shall wrap around to start reading from beginning again, and again... + * + * 2. For PCI config space register write access, it supports a single PCI + * config space register write in the size of a byte (8 bits), a word + * (16 bits), or a dword (32 bits). The command syntax is, + * + * echo 2 > pciCfg + * + * where, 2 is the iDiag command for PCI config space write, is + * the offset from the beginning of the device's PCI config space to write + * into, is the size of data to write into the PCI config space, + * it will be 1 for writing a byte (8 bits), 2 for writing a word (16 bits + * or 2 bytes), or 4 for writing a dword (32 bits or 4 bytes), and + * is the data to be written into the PCI config space register at the + * offset. + * + * Examples: + * To disable PCI device's interrupt assertion, + * + * 1) Read in device's PCI config space register command field : + * + * echo 1 4 2 > pciCfg + * cat pciCfg + * + * 2) Set bit 10 (Interrupt Disable bit) in the : + * + * = | (1 < 10) + * + * 3) Write the modified command back: + * + * echo 2 4 2 > pciCfg + * + * 3. For PCI config space register set bits access, it supports a single PCI + * config space register set bits in the size of a byte (8 bits), a word + * (16 bits), or a dword (32 bits). The command syntax is, + * + * echo 3 > pciCfg + * + * where, 3 is the iDiag command for PCI config space set bits, is + * the offset from the beginning of the device's PCI config space to set + * bits into, is the size of the bitmask to set into the PCI config + * space, it will be 1 for setting a byte (8 bits), 2 for setting a word + * (16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 bytes), and + * is the bitmask, indicating the bits to be set into the PCI + * config space register at the offset. The logic performed to the content + * of the PCI config space register, regval, is, + * + * regval |= + * + * 4. For PCI config space register clear bits access, it supports a single + * PCI config space register clear bits in the size of a byte (8 bits), + * a word (16 bits), or a dword (32 bits). The command syntax is, + * + * echo 4 > pciCfg + * + * where, 4 is the iDiag command for PCI config space clear bits, + * is the offset from the beginning of the device's PCI config space to + * clear bits from, is the size of the bitmask to set into the PCI + * config space, it will be 1 for setting a byte (8 bits), 2 for setting + * a word(16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 + * bytes), and is the bitmask, indicating the bits to be cleared + * from the PCI config space register at the offset. the logic performed + * to the content of the PCI config space register, regval, is, + * + * regval &= ~ + * + * Note, for all single register read, write, set bits, or clear bits access, + * the offset () must be aligned with the size of the data: + * + * For data size of byte (8 bits), the offset must be aligned to the byte + * boundary; for data size of word (16 bits), the offset must be aligned + * to the word boundary; while for data size of dword (32 bits), the offset + * must be aligned to the dword boundary. Otherwise, the interface will + * return the error: + * + * "-bash: echo: write error: Invalid argument". + * + * For example: + * + * echo 1 2 4 > pciCfg + * -bash: echo: write error: Invalid argument + * + * Note also, all of the numbers in the command fields for all read, write, + * set bits, and clear bits PCI config space register command fields can be + * either decimal or hex. + * + * For example, + * echo 1 0 4096 > pciCfg + * + * will be the same as + * echo 1 0 0x1000 > pciCfg + * + * And, + * echo 2 155 1 10 > pciCfg + * + * will be + * echo 2 0x9b 1 0xa > pciCfg + */ + +/** + * lpfc_idiag_cmd_get - Get and parse idiag debugfs comands from user space + * @buf: The pointer to the user space buffer. + * @nbytes: The number of bytes in the user space buffer. + * @idiag_cmd: pointer to the idiag command struct. + * + * This routine reads data from debugfs user space buffer and parses the + * buffer for getting the idiag command and arguments. The while space in + * between the set of data is used as the parsing separator. + * + * This routine returns 0 when successful, it returns proper error code + * back to the user space in error conditions. + */ +static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes, + struct lpfc_idiag_cmd *idiag_cmd) +{ + char mybuf[64]; + char *pbuf, *step_str; + int bsize, i; + + /* Protect copy from user */ + if (!access_ok(VERIFY_READ, buf, nbytes)) + return -EFAULT; + + memset(mybuf, 0, sizeof(mybuf)); + memset(idiag_cmd, 0, sizeof(*idiag_cmd)); + bsize = min(nbytes, (sizeof(mybuf)-1)); + + if (copy_from_user(mybuf, buf, bsize)) + return -EFAULT; + pbuf = &mybuf[0]; + step_str = strsep(&pbuf, "\t "); + + /* The opcode must present */ + if (!step_str) + return -EINVAL; + + idiag_cmd->opcode = simple_strtol(step_str, NULL, 0); + if (idiag_cmd->opcode == 0) + return -EINVAL; + + for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) { + step_str = strsep(&pbuf, "\t "); + if (!step_str) + return 0; + idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0); + } + return 0; +} + +/** + * lpfc_idiag_open - idiag open debugfs + * @inode: The inode pointer that contains a pointer to phba. + * @file: The file pointer to attach the file operation. + * + * Description: + * This routine is the entry point for the debugfs open file operation. It + * gets the reference to phba from the i_private field in @inode, it then + * allocates buffer for the file operation, performs the necessary PCI config + * space read into the allocated buffer according to the idiag user command + * setup, and then returns a pointer to buffer in the private_data field in + * @file. + * + * Returns: + * This function returns zero if successful. On error it will return an + * negative error value. + **/ +static int +lpfc_idiag_open(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug; + + debug = kmalloc(sizeof(*debug), GFP_KERNEL); + if (!debug) + return -ENOMEM; + + debug->i_private = inode->i_private; + debug->buffer = NULL; + file->private_data = debug; + + return 0; +} + +/** + * lpfc_idiag_release - Release idiag access file operation + * @inode: The inode pointer that contains a vport pointer. (unused) + * @file: The file pointer that contains the buffer to release. + * + * Description: + * This routine is the generic release routine for the idiag access file + * operation, it frees the buffer that was allocated when the debugfs file + * was opened. + * + * Returns: + * This function returns zero. + **/ +static int +lpfc_idiag_release(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug = file->private_data; + + /* Free the buffers to the file operation */ + kfree(debug->buffer); + kfree(debug); + + return 0; +} + +/** + * lpfc_idiag_cmd_release - Release idiag cmd access file operation + * @inode: The inode pointer that contains a vport pointer. (unused) + * @file: The file pointer that contains the buffer to release. + * + * Description: + * This routine frees the buffer that was allocated when the debugfs file + * was opened. It also reset the fields in the idiag command struct in the + * case the command is not continuous browsing of the data structure. + * + * Returns: + * This function returns zero. + **/ +static int +lpfc_idiag_cmd_release(struct inode *inode, struct file *file) +{ + struct lpfc_debug *debug = file->private_data; + + /* Read PCI config register, if not read all, clear command fields */ + if ((debug->op == LPFC_IDIAG_OP_RD) && + (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD)) + if ((idiag.cmd.data[1] == sizeof(uint8_t)) || + (idiag.cmd.data[1] == sizeof(uint16_t)) || + (idiag.cmd.data[1] == sizeof(uint32_t))) + memset(&idiag, 0, sizeof(idiag)); + + /* Write PCI config register, clear command fields */ + if ((debug->op == LPFC_IDIAG_OP_WR) && + (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)) + memset(&idiag, 0, sizeof(idiag)); + + /* Free the buffers to the file operation */ + kfree(debug->buffer); + kfree(debug); + + return 0; +} + +/** + * lpfc_idiag_pcicfg_read - idiag debugfs read pcicfg + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba pci config space according to the + * idiag command, and copies to user @buf. Depending on the PCI config space + * read command setup, it does either a single register read of a byte + * (8 bits), a word (16 bits), or a dword (32 bits) or browsing through all + * registers from the 4K extended PCI config space. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + int offset_label, offset, len = 0, index = LPFC_PCI_CFG_RD_SIZE; + int where, count; + char *pbuffer; + struct pci_dev *pdev; + uint32_t u32val; + uint16_t u16val; + uint8_t u8val; + + pdev = phba->pcidev; + if (!pdev) + return 0; + + /* This is a user read operation */ + debug->op = LPFC_IDIAG_OP_RD; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_PCI_CFG_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) { + where = idiag.cmd.data[0]; + count = idiag.cmd.data[1]; + } else + return 0; + + /* Read single PCI config space register */ + switch (count) { + case SIZE_U8: /* byte (8 bits) */ + pci_read_config_byte(pdev, where, &u8val); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%03x: %02x\n", where, u8val); + break; + case SIZE_U16: /* word (16 bits) */ + pci_read_config_word(pdev, where, &u16val); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%03x: %04x\n", where, u16val); + break; + case SIZE_U32: /* double word (32 bits) */ + pci_read_config_dword(pdev, where, &u32val); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%03x: %08x\n", where, u32val); + break; + case LPFC_PCI_CFG_SIZE: /* browse all */ + goto pcicfg_browse; + break; + default: + /* illegal count */ + len = 0; + break; + } + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); + +pcicfg_browse: + + /* Browse all PCI config space registers */ + offset_label = idiag.offset.last_rd; + offset = offset_label; + + /* Read PCI config space */ + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%03x: ", offset_label); + while (index > 0) { + pci_read_config_dword(pdev, offset, &u32val); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "%08x ", u32val); + offset += sizeof(uint32_t); + index -= sizeof(uint32_t); + if (!index) + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "\n"); + else if (!(index % (8 * sizeof(uint32_t)))) { + offset_label += (8 * sizeof(uint32_t)); + len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len, + "\n%03x: ", offset_label); + } + } + + /* Set up the offset for next portion of pci cfg read */ + idiag.offset.last_rd += LPFC_PCI_CFG_RD_SIZE; + if (idiag.offset.last_rd >= LPFC_PCI_CFG_SIZE) + idiag.offset.last_rd = 0; + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + +/** + * lpfc_idiag_pcicfg_write - Syntax check and set up idiag pcicfg commands + * @file: The file pointer to read from. + * @buf: The buffer to copy the user data from. + * @nbytes: The number of bytes to get. + * @ppos: The position in the file to start reading from. + * + * This routine get the debugfs idiag command struct from user space and + * then perform the syntax check for PCI config space read or write command + * accordingly. In the case of PCI config space read command, it sets up + * the command in the idiag command struct for the debugfs read operation. + * In the case of PCI config space write operation, it executes the write + * operation into the PCI config space accordingly. + * + * It returns the @nbytges passing in from debugfs user space when successful. + * In case of error conditions, it returns proper error code back to the user + * space. + */ +static ssize_t +lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + uint32_t where, value, count; + uint32_t u32val; + uint16_t u16val; + uint8_t u8val; + struct pci_dev *pdev; + int rc; + + pdev = phba->pcidev; + if (!pdev) + return -EFAULT; + + /* This is a user write operation */ + debug->op = LPFC_IDIAG_OP_WR; + + rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd); + if (rc) + return rc; + + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) { + /* Read command from PCI config space, set up command fields */ + where = idiag.cmd.data[0]; + count = idiag.cmd.data[1]; + if (count == LPFC_PCI_CFG_SIZE) { + if (where != 0) + goto error_out; + } else if ((count != sizeof(uint8_t)) && + (count != sizeof(uint16_t)) && + (count != sizeof(uint32_t))) + goto error_out; + if (count == sizeof(uint8_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t)) + goto error_out; + if (where % sizeof(uint8_t)) + goto error_out; + } + if (count == sizeof(uint16_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t)) + goto error_out; + if (where % sizeof(uint16_t)) + goto error_out; + } + if (count == sizeof(uint32_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t)) + goto error_out; + if (where % sizeof(uint32_t)) + goto error_out; + } + } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR || + idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST || + idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { + /* Write command to PCI config space, read-modify-write */ + where = idiag.cmd.data[0]; + count = idiag.cmd.data[1]; + value = idiag.cmd.data[2]; + /* Sanity checks */ + if ((count != sizeof(uint8_t)) && + (count != sizeof(uint16_t)) && + (count != sizeof(uint32_t))) + goto error_out; + if (count == sizeof(uint8_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t)) + goto error_out; + if (where % sizeof(uint8_t)) + goto error_out; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR) + pci_write_config_byte(pdev, where, + (uint8_t)value); + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) { + rc = pci_read_config_byte(pdev, where, &u8val); + if (!rc) { + u8val |= (uint8_t)value; + pci_write_config_byte(pdev, where, + u8val); + } + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { + rc = pci_read_config_byte(pdev, where, &u8val); + if (!rc) { + u8val &= (uint8_t)(~value); + pci_write_config_byte(pdev, where, + u8val); + } + } + } + if (count == sizeof(uint16_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t)) + goto error_out; + if (where % sizeof(uint16_t)) + goto error_out; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR) + pci_write_config_word(pdev, where, + (uint16_t)value); + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) { + rc = pci_read_config_word(pdev, where, &u16val); + if (!rc) { + u16val |= (uint16_t)value; + pci_write_config_word(pdev, where, + u16val); + } + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { + rc = pci_read_config_word(pdev, where, &u16val); + if (!rc) { + u16val &= (uint16_t)(~value); + pci_write_config_word(pdev, where, + u16val); + } + } + } + if (count == sizeof(uint32_t)) { + if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t)) + goto error_out; + if (where % sizeof(uint32_t)) + goto error_out; + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR) + pci_write_config_dword(pdev, where, value); + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) { + rc = pci_read_config_dword(pdev, where, + &u32val); + if (!rc) { + u32val |= value; + pci_write_config_dword(pdev, where, + u32val); + } + } + if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) { + rc = pci_read_config_dword(pdev, where, + &u32val); + if (!rc) { + u32val &= ~value; + pci_write_config_dword(pdev, where, + u32val); + } + } + } + } else + /* All other opecodes are illegal for now */ + goto error_out; + + return nbytes; +error_out: + memset(&idiag, 0, sizeof(idiag)); + return -EINVAL; +} + +/** + * lpfc_idiag_queinfo_read - idiag debugfs read queue information + * @file: The file pointer to read from. + * @buf: The buffer to copy the data to. + * @nbytes: The number of bytes to read. + * @ppos: The position in the file to start reading from. + * + * Description: + * This routine reads data from the @phba SLI4 PCI function queue information, + * and copies to user @buf. + * + * Returns: + * This function returns the amount of data that was read (this could be less + * than @nbytes if the end of the file was reached) or a negative error value. + **/ +static ssize_t +lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, + loff_t *ppos) +{ + struct lpfc_debug *debug = file->private_data; + struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private; + int len = 0, fcp_qidx; + char *pbuffer; + + if (!debug->buffer) + debug->buffer = kmalloc(LPFC_QUE_INFO_GET_BUF_SIZE, GFP_KERNEL); + if (!debug->buffer) + return 0; + pbuffer = debug->buffer; + + if (*ppos) + return 0; + + /* Get slow-path event queue information */ + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "Slow-path EQ information:\n"); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], EQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + phba->sli4_hba.sp_eq->queue_id, + phba->sli4_hba.sp_eq->entry_count, + phba->sli4_hba.sp_eq->host_index, + phba->sli4_hba.sp_eq->hba_index); + + /* Get fast-path event queue information */ + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "Fast-path EQ information:\n"); + for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) { + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], EQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", + phba->sli4_hba.fp_eq[fcp_qidx]->queue_id, + phba->sli4_hba.fp_eq[fcp_qidx]->entry_count, + phba->sli4_hba.fp_eq[fcp_qidx]->host_index, + phba->sli4_hba.fp_eq[fcp_qidx]->hba_index); + } + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + + /* Get mailbox complete queue information */ + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "Mailbox CQ information:\n"); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tAssociated EQ-ID [%02d]:\n", + phba->sli4_hba.mbx_cq->assoc_qid); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], CQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + phba->sli4_hba.mbx_cq->queue_id, + phba->sli4_hba.mbx_cq->entry_count, + phba->sli4_hba.mbx_cq->host_index, + phba->sli4_hba.mbx_cq->hba_index); + + /* Get slow-path complete queue information */ + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "Slow-path CQ information:\n"); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tAssociated EQ-ID [%02d]:\n", + phba->sli4_hba.els_cq->assoc_qid); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], CQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + phba->sli4_hba.els_cq->queue_id, + phba->sli4_hba.els_cq->entry_count, + phba->sli4_hba.els_cq->host_index, + phba->sli4_hba.els_cq->hba_index); + + /* Get fast-path complete queue information */ + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "Fast-path CQ information:\n"); + for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) { + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tAssociated EQ-ID [%02d]:\n", + phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], EQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", + phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id, + phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count, + phba->sli4_hba.fcp_cq[fcp_qidx]->host_index, + phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index); + } + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + + /* Get mailbox queue information */ + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "Mailbox MQ information:\n"); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tAssociated CQ-ID [%02d]:\n", + phba->sli4_hba.mbx_wq->assoc_qid); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], MQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + phba->sli4_hba.mbx_wq->queue_id, + phba->sli4_hba.mbx_wq->entry_count, + phba->sli4_hba.mbx_wq->host_index, + phba->sli4_hba.mbx_wq->hba_index); + + /* Get slow-path work queue information */ + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "Slow-path WQ information:\n"); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tAssociated CQ-ID [%02d]:\n", + phba->sli4_hba.els_wq->assoc_qid); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], WQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n", + phba->sli4_hba.els_wq->queue_id, + phba->sli4_hba.els_wq->entry_count, + phba->sli4_hba.els_wq->host_index, + phba->sli4_hba.els_wq->hba_index); + + /* Get fast-path work queue information */ + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "Fast-path WQ information:\n"); + for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++) { + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tAssociated CQ-ID [%02d]:\n", + phba->sli4_hba.fcp_wq[fcp_qidx]->assoc_qid); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], WQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", + phba->sli4_hba.fcp_wq[fcp_qidx]->queue_id, + phba->sli4_hba.fcp_wq[fcp_qidx]->entry_count, + phba->sli4_hba.fcp_wq[fcp_qidx]->host_index, + phba->sli4_hba.fcp_wq[fcp_qidx]->hba_index); + } + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); + + /* Get receive queue information */ + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "Slow-path RQ information:\n"); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\t\tAssociated CQ-ID [%02d]:\n", + phba->sli4_hba.hdr_rq->assoc_qid); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], RHQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", + phba->sli4_hba.hdr_rq->queue_id, + phba->sli4_hba.hdr_rq->entry_count, + phba->sli4_hba.hdr_rq->host_index, + phba->sli4_hba.hdr_rq->hba_index); + len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, + "\tID [%02d], RDQE-COUNT [%04d], " + "HOST-INDEX [%04x], PORT-INDEX [%04x]\n", + phba->sli4_hba.dat_rq->queue_id, + phba->sli4_hba.dat_rq->entry_count, + phba->sli4_hba.dat_rq->host_index, + phba->sli4_hba.dat_rq->hba_index); + + return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len); +} + #undef lpfc_debugfs_op_disc_trc static const struct file_operations lpfc_debugfs_op_disc_trc = { .owner = THIS_MODULE, @@ -1213,6 +1964,28 @@ static const struct file_operations lpfc_debugfs_op_slow_ring_trc = { static struct dentry *lpfc_debugfs_root = NULL; static atomic_t lpfc_debugfs_hba_count; + +/* + * File operations for the iDiag debugfs + */ +#undef lpfc_idiag_op_pciCfg +static const struct file_operations lpfc_idiag_op_pciCfg = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .llseek = lpfc_debugfs_lseek, + .read = lpfc_idiag_pcicfg_read, + .write = lpfc_idiag_pcicfg_write, + .release = lpfc_idiag_cmd_release, +}; + +#undef lpfc_idiag_op_queInfo +static const struct file_operations lpfc_idiag_op_queInfo = { + .owner = THIS_MODULE, + .open = lpfc_idiag_open, + .read = lpfc_idiag_queinfo_read, + .release = lpfc_idiag_release, +}; + #endif /** @@ -1249,8 +2022,8 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) if (!lpfc_debugfs_start_time) lpfc_debugfs_start_time = jiffies; - /* Setup lpfcX directory for specific HBA */ - snprintf(name, sizeof(name), "lpfc%d", phba->brd_no); + /* Setup funcX directory for specific HBA PCI function */ + snprintf(name, sizeof(name), "fn%d", phba->brd_no); if (!phba->hba_debugfs_root) { phba->hba_debugfs_root = debugfs_create_dir(name, lpfc_debugfs_root); @@ -1275,28 +2048,38 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) } /* Setup dumpHBASlim */ - snprintf(name, sizeof(name), "dumpHBASlim"); - phba->debug_dumpHBASlim = - debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, - phba->hba_debugfs_root, - phba, &lpfc_debugfs_op_dumpHBASlim); - if (!phba->debug_dumpHBASlim) { - lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0413 Cannot create debugfs dumpHBASlim\n"); - goto debug_failed; - } + if (phba->sli_rev < LPFC_SLI_REV4) { + snprintf(name, sizeof(name), "dumpHBASlim"); + phba->debug_dumpHBASlim = + debugfs_create_file(name, + S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dumpHBASlim); + if (!phba->debug_dumpHBASlim) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0413 Cannot create debugfs " + "dumpHBASlim\n"); + goto debug_failed; + } + } else + phba->debug_dumpHBASlim = NULL; /* Setup dumpHostSlim */ - snprintf(name, sizeof(name), "dumpHostSlim"); - phba->debug_dumpHostSlim = - debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, - phba->hba_debugfs_root, - phba, &lpfc_debugfs_op_dumpHostSlim); - if (!phba->debug_dumpHostSlim) { - lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, - "0414 Cannot create debugfs dumpHostSlim\n"); - goto debug_failed; - } + if (phba->sli_rev < LPFC_SLI_REV4) { + snprintf(name, sizeof(name), "dumpHostSlim"); + phba->debug_dumpHostSlim = + debugfs_create_file(name, + S_IFREG|S_IRUGO|S_IWUSR, + phba->hba_debugfs_root, + phba, &lpfc_debugfs_op_dumpHostSlim); + if (!phba->debug_dumpHostSlim) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "0414 Cannot create debugfs " + "dumpHostSlim\n"); + goto debug_failed; + } + } else + phba->debug_dumpHBASlim = NULL; /* Setup dumpData */ snprintf(name, sizeof(name), "dumpData"); @@ -1322,8 +2105,6 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) goto debug_failed; } - - /* Setup slow ring trace */ if (lpfc_debugfs_max_slow_ring_trc) { num = lpfc_debugfs_max_slow_ring_trc - 1; @@ -1342,7 +2123,6 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) } } - snprintf(name, sizeof(name), "slow_ring_trace"); phba->debug_slow_ring_trc = debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, @@ -1434,6 +2214,53 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport) "0409 Cant create debugfs nodelist\n"); goto debug_failed; } + + /* + * iDiag debugfs root entry points for SLI4 device only + */ + if (phba->sli_rev < LPFC_SLI_REV4) + goto debug_failed; + + snprintf(name, sizeof(name), "iDiag"); + if (!phba->idiag_root) { + phba->idiag_root = + debugfs_create_dir(name, phba->hba_debugfs_root); + if (!phba->idiag_root) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2922 Can't create idiag debugfs\n"); + goto debug_failed; + } + /* Initialize iDiag data structure */ + memset(&idiag, 0, sizeof(idiag)); + } + + /* iDiag read PCI config space */ + snprintf(name, sizeof(name), "pciCfg"); + if (!phba->idiag_pci_cfg) { + phba->idiag_pci_cfg = + debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR, + phba->idiag_root, phba, &lpfc_idiag_op_pciCfg); + if (!phba->idiag_pci_cfg) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2923 Can't create idiag debugfs\n"); + goto debug_failed; + } + idiag.offset.last_rd = 0; + } + + /* iDiag get PCI function queue information */ + snprintf(name, sizeof(name), "queInfo"); + if (!phba->idiag_que_info) { + phba->idiag_que_info = + debugfs_create_file(name, S_IFREG|S_IRUGO, + phba->idiag_root, phba, &lpfc_idiag_op_queInfo); + if (!phba->idiag_que_info) { + lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, + "2924 Can't create idiag debugfs\n"); + goto debug_failed; + } + } + debug_failed: return; #endif @@ -1508,8 +2335,31 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport) phba->debug_slow_ring_trc = NULL; } + /* + * iDiag release + */ + if (phba->sli_rev == LPFC_SLI_REV4) { + if (phba->idiag_que_info) { + /* iDiag queInfo */ + debugfs_remove(phba->idiag_que_info); + phba->idiag_que_info = NULL; + } + if (phba->idiag_pci_cfg) { + /* iDiag pciCfg */ + debugfs_remove(phba->idiag_pci_cfg); + phba->idiag_pci_cfg = NULL; + } + + /* Finally remove the iDiag debugfs root */ + if (phba->idiag_root) { + /* iDiag root */ + debugfs_remove(phba->idiag_root); + phba->idiag_root = NULL; + } + } + if (phba->hba_debugfs_root) { - debugfs_remove(phba->hba_debugfs_root); /* lpfcX */ + debugfs_remove(phba->hba_debugfs_root); /* fnX */ phba->hba_debugfs_root = NULL; atomic_dec(&lpfc_debugfs_hba_count); } -- cgit v1.1