From 39f802d6b6d9a922f2c7a9165f0a7a5b819a1e3f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 Jan 2015 20:29:31 +0100 Subject: regulator: Build sysfs entries with static attribute groups Instead of calling device_create_file() manually after the device registration, put all in attribute groups and filter the unwanted ones via is_visible callback. This not only simplifies the code but also avoids the possible race between the device registration and sysfs registration. Signed-off-by: Takashi Iwai Signed-off-by: Mark Brown --- drivers/regulator/core.c | 235 ++++++++++++++++++++++------------------------- 1 file changed, 108 insertions(+), 127 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index c2554d8..91d79b8 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -632,30 +632,6 @@ static ssize_t regulator_bypass_show(struct device *dev, static DEVICE_ATTR(bypass, 0444, regulator_bypass_show, NULL); -/* - * These are the only attributes are present for all regulators. - * Other attributes are a function of regulator functionality. - */ -static struct attribute *regulator_dev_attrs[] = { - &dev_attr_name.attr, - &dev_attr_num_users.attr, - &dev_attr_type.attr, - NULL, -}; -ATTRIBUTE_GROUPS(regulator_dev); - -static void regulator_dev_release(struct device *dev) -{ - struct regulator_dev *rdev = dev_get_drvdata(dev); - kfree(rdev); -} - -static struct class regulator_class = { - .name = "regulator", - .dev_release = regulator_dev_release, - .dev_groups = regulator_dev_groups, -}; - /* Calculate the new optimum regulator operating mode based on the new total * consumer load. All locks held by caller */ static void drms_uA_update(struct regulator_dev *rdev) @@ -3434,126 +3410,136 @@ int regulator_mode_to_status(unsigned int mode) } EXPORT_SYMBOL_GPL(regulator_mode_to_status); +static struct attribute *regulator_dev_attrs[] = { + &dev_attr_name.attr, + &dev_attr_num_users.attr, + &dev_attr_type.attr, + &dev_attr_microvolts.attr, + &dev_attr_microamps.attr, + &dev_attr_opmode.attr, + &dev_attr_state.attr, + &dev_attr_status.attr, + &dev_attr_bypass.attr, + &dev_attr_requested_microamps.attr, + &dev_attr_min_microvolts.attr, + &dev_attr_max_microvolts.attr, + &dev_attr_min_microamps.attr, + &dev_attr_max_microamps.attr, + &dev_attr_suspend_standby_state.attr, + &dev_attr_suspend_mem_state.attr, + &dev_attr_suspend_disk_state.attr, + &dev_attr_suspend_standby_microvolts.attr, + &dev_attr_suspend_mem_microvolts.attr, + &dev_attr_suspend_disk_microvolts.attr, + &dev_attr_suspend_standby_mode.attr, + &dev_attr_suspend_mem_mode.attr, + &dev_attr_suspend_disk_mode.attr, + NULL +}; + /* * To avoid cluttering sysfs (and memory) with useless state, only * create attributes that can be meaningfully displayed. */ -static int add_regulator_attributes(struct regulator_dev *rdev) +static umode_t regulator_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) { - struct device *dev = &rdev->dev; + struct device *dev = kobj_to_dev(kobj); + struct regulator_dev *rdev = container_of(dev, struct regulator_dev, dev); const struct regulator_ops *ops = rdev->desc->ops; - int status = 0; + umode_t mode = attr->mode; + + /* these three are always present */ + if (attr == &dev_attr_name.attr || + attr == &dev_attr_num_users.attr || + attr == &dev_attr_type.attr) + return mode; /* some attributes need specific methods to be displayed */ - if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || - (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || - (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) || - (rdev->desc->fixed_uV && (rdev->desc->n_voltages == 1))) { - status = device_create_file(dev, &dev_attr_microvolts); - if (status < 0) - return status; - } - if (ops->get_current_limit) { - status = device_create_file(dev, &dev_attr_microamps); - if (status < 0) - return status; - } - if (ops->get_mode) { - status = device_create_file(dev, &dev_attr_opmode); - if (status < 0) - return status; - } - if (rdev->ena_pin || ops->is_enabled) { - status = device_create_file(dev, &dev_attr_state); - if (status < 0) - return status; - } - if (ops->get_status) { - status = device_create_file(dev, &dev_attr_status); - if (status < 0) - return status; - } - if (ops->get_bypass) { - status = device_create_file(dev, &dev_attr_bypass); - if (status < 0) - return status; + if (attr == &dev_attr_microvolts.attr) { + if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) || + (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0) || + (ops->list_voltage && ops->list_voltage(rdev, 0) >= 0) || + (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1)) + return mode; + return 0; } + if (attr == &dev_attr_microamps.attr) + return ops->get_current_limit ? mode : 0; + + if (attr == &dev_attr_opmode.attr) + return ops->get_mode ? mode : 0; + + if (attr == &dev_attr_state.attr) + return (rdev->ena_pin || ops->is_enabled) ? mode : 0; + + if (attr == &dev_attr_status.attr) + return ops->get_status ? mode : 0; + + if (attr == &dev_attr_bypass.attr) + return ops->get_bypass ? mode : 0; + /* some attributes are type-specific */ - if (rdev->desc->type == REGULATOR_CURRENT) { - status = device_create_file(dev, &dev_attr_requested_microamps); - if (status < 0) - return status; - } + if (attr == &dev_attr_requested_microamps.attr) + return rdev->desc->type == REGULATOR_CURRENT ? mode : 0; /* all the other attributes exist to support constraints; * don't show them if there are no constraints, or if the * relevant supporting methods are missing. */ if (!rdev->constraints) - return status; + return 0; /* constraints need specific supporting methods */ - if (ops->set_voltage || ops->set_voltage_sel) { - status = device_create_file(dev, &dev_attr_min_microvolts); - if (status < 0) - return status; - status = device_create_file(dev, &dev_attr_max_microvolts); - if (status < 0) - return status; - } - if (ops->set_current_limit) { - status = device_create_file(dev, &dev_attr_min_microamps); - if (status < 0) - return status; - status = device_create_file(dev, &dev_attr_max_microamps); - if (status < 0) - return status; - } - - status = device_create_file(dev, &dev_attr_suspend_standby_state); - if (status < 0) - return status; - status = device_create_file(dev, &dev_attr_suspend_mem_state); - if (status < 0) - return status; - status = device_create_file(dev, &dev_attr_suspend_disk_state); - if (status < 0) - return status; + if (attr == &dev_attr_min_microvolts.attr || + attr == &dev_attr_max_microvolts.attr) + return (ops->set_voltage || ops->set_voltage_sel) ? mode : 0; + + if (attr == &dev_attr_min_microamps.attr || + attr == &dev_attr_max_microamps.attr) + return ops->set_current_limit ? mode : 0; + + if (attr == &dev_attr_suspend_standby_state.attr || + attr == &dev_attr_suspend_mem_state.attr || + attr == &dev_attr_suspend_disk_state.attr) + return mode; + + if (attr == &dev_attr_suspend_standby_microvolts.attr || + attr == &dev_attr_suspend_mem_microvolts.attr || + attr == &dev_attr_suspend_disk_microvolts.attr) + return ops->set_suspend_voltage ? mode : 0; + + if (attr == &dev_attr_suspend_standby_mode.attr || + attr == &dev_attr_suspend_mem_mode.attr || + attr == &dev_attr_suspend_disk_mode.attr) + return ops->set_suspend_mode ? mode : 0; + + return mode; +} + +static const struct attribute_group regulator_dev_group = { + .attrs = regulator_dev_attrs, + .is_visible = regulator_attr_is_visible, +}; + +static const struct attribute_group *regulator_dev_groups[] = { + ®ulator_dev_group, + NULL +}; - if (ops->set_suspend_voltage) { - status = device_create_file(dev, - &dev_attr_suspend_standby_microvolts); - if (status < 0) - return status; - status = device_create_file(dev, - &dev_attr_suspend_mem_microvolts); - if (status < 0) - return status; - status = device_create_file(dev, - &dev_attr_suspend_disk_microvolts); - if (status < 0) - return status; - } - - if (ops->set_suspend_mode) { - status = device_create_file(dev, - &dev_attr_suspend_standby_mode); - if (status < 0) - return status; - status = device_create_file(dev, - &dev_attr_suspend_mem_mode); - if (status < 0) - return status; - status = device_create_file(dev, - &dev_attr_suspend_disk_mode); - if (status < 0) - return status; - } - - return status; +static void regulator_dev_release(struct device *dev) +{ + struct regulator_dev *rdev = dev_get_drvdata(dev); + kfree(rdev); } +static struct class regulator_class = { + .name = "regulator", + .dev_release = regulator_dev_release, + .dev_groups = regulator_dev_groups, +}; + static void rdev_init_debugfs(struct regulator_dev *rdev) { rdev->debugfs = debugfs_create_dir(rdev_get_name(rdev), debugfs_root); @@ -3692,11 +3678,6 @@ regulator_register(const struct regulator_desc *regulator_desc, if (ret < 0) goto scrub; - /* add attributes supported by this regulator */ - ret = add_regulator_attributes(rdev); - if (ret < 0) - goto scrub; - if (init_data && init_data->supply_regulator) supply = init_data->supply_regulator; else if (regulator_desc->supply_name) -- cgit v1.1