From 13d57e64352a5d3457d7782bc2f8b576e12b05f3 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 2 Feb 2016 18:27:38 +0800 Subject: regulator: axp20x: Use linear voltage ranges for AXP20X LDO4 AXP20X datasheet lists the possible voltage settings for LDO4, so it was implemented using a voltage table. Upon closer examination, the valid voltages can be mapped into 3 linear ranges. Move AXP20X LDO4 to use linear ranges. The supporting code can be reused with later AXP8xx PMICs, which have a number of regulators that have 2 linear ranges. Signed-off-by: Chen-Yu Tsai Signed-off-by: Mark Brown --- drivers/regulator/axp20x-regulator.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'drivers/regulator') diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c index fafaaa8..7d29893 100644 --- a/drivers/regulator/axp20x-regulator.c +++ b/drivers/regulator/axp20x-regulator.c @@ -106,8 +106,8 @@ .ops = &axp20x_ops_fixed \ } -#define AXP_DESC_TABLE(_family, _id, _match, _supply, _table, _vreg, _vmask, \ - _ereg, _emask) \ +#define AXP_DESC_RANGES(_family, _id, _match, _supply, _ranges, _n_voltages, \ + _vreg, _vmask, _ereg, _emask) \ [_family##_##_id] = { \ .name = #_id, \ .supply_name = (_supply), \ @@ -115,30 +115,25 @@ .regulators_node = of_match_ptr("regulators"), \ .type = REGULATOR_VOLTAGE, \ .id = _family##_##_id, \ - .n_voltages = ARRAY_SIZE(_table), \ + .n_voltages = (_n_voltages), \ .owner = THIS_MODULE, \ .vsel_reg = (_vreg), \ .vsel_mask = (_vmask), \ .enable_reg = (_ereg), \ .enable_mask = (_emask), \ - .volt_table = (_table), \ - .ops = &axp20x_ops_table, \ + .linear_ranges = (_ranges), \ + .n_linear_ranges = ARRAY_SIZE(_ranges), \ + .ops = &axp20x_ops_range, \ } -static const int axp20x_ldo4_data[] = { 1250000, 1300000, 1400000, 1500000, 1600000, - 1700000, 1800000, 1900000, 2000000, 2500000, - 2700000, 2800000, 3000000, 3100000, 3200000, - 3300000 }; - static struct regulator_ops axp20x_ops_fixed = { .list_voltage = regulator_list_voltage_linear, }; -static struct regulator_ops axp20x_ops_table = { +static struct regulator_ops axp20x_ops_range = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, - .list_voltage = regulator_list_voltage_table, - .map_voltage = regulator_map_voltage_ascend, + .list_voltage = regulator_list_voltage_linear_range, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, .is_enabled = regulator_is_enabled_regmap, @@ -159,6 +154,12 @@ static struct regulator_ops axp20x_ops_sw = { .is_enabled = regulator_is_enabled_regmap, }; +static const struct regulator_linear_range axp20x_ldo4_ranges[] = { + REGULATOR_LINEAR_RANGE(1250000, 0x0, 0x0, 0), + REGULATOR_LINEAR_RANGE(1300000, 0x1, 0x8, 100000), + REGULATOR_LINEAR_RANGE(2500000, 0x9, 0xf, 100000), +}; + static const struct regulator_desc axp20x_regulators[] = { AXP_DESC(AXP20X, DCDC2, "dcdc2", "vin2", 700, 2275, 25, AXP20X_DCDC2_V_OUT, 0x3f, AXP20X_PWR_OUT_CTRL, 0x10), @@ -169,8 +170,9 @@ static const struct regulator_desc axp20x_regulators[] = { AXP20X_LDO24_V_OUT, 0xf0, AXP20X_PWR_OUT_CTRL, 0x04), AXP_DESC(AXP20X, LDO3, "ldo3", "ldo3in", 700, 3500, 25, AXP20X_LDO3_V_OUT, 0x7f, AXP20X_PWR_OUT_CTRL, 0x40), - AXP_DESC_TABLE(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_data, - AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, 0x08), + AXP_DESC_RANGES(AXP20X, LDO4, "ldo4", "ldo24in", axp20x_ldo4_ranges, + 16, AXP20X_LDO24_V_OUT, 0x0f, AXP20X_PWR_OUT_CTRL, + 0x08), AXP_DESC_IO(AXP20X, LDO5, "ldo5", "ldo5in", 1800, 3300, 100, AXP20X_LDO5_V_OUT, 0xf0, AXP20X_GPIO0_CTRL, 0x07, AXP20X_IO_ENABLED, AXP20X_IO_DISABLED), -- cgit v1.1