From 7e0540f41332cb07055c5fe6629dc83c71974c82 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 12 Oct 2017 15:34:45 +0900 Subject: phy: rcar-gen3-usb2: check dr_mode for otg mode The previous code assumed a channel has otg capability if a channel has interrupt property. But, it is not good because: - Battery charging feature also needs interrupt property. - Some R-Car Gen3 SoCs (e.g. R-Car D3) don't have OTG capability. So, this patch checks whether usb 2.0 host node has dr_mode property or not. If it has 'dr_mode = "otg";', this driver enables otg capability. Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/renesas/phy-rcar-gen3-usb2.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/phy') diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c index 54c3429..e00e99a 100644 --- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c +++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c @@ -1,7 +1,7 @@ /* * Renesas R-Car Gen3 for USB2.0 PHY driver * - * Copyright (C) 2015 Renesas Electronics Corporation + * Copyright (C) 2015-2017 Renesas Electronics Corporation * * This is based on the phy-rcar-gen2 driver: * Copyright (C) 2014 Renesas Solutions Corp. @@ -22,6 +22,7 @@ #include #include #include +#include #include /******* USB2.0 Host registers (original offset is +0x200) *******/ @@ -415,13 +416,16 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) /* call request_irq for OTG */ irq = platform_get_irq(pdev, 0); if (irq >= 0) { - int ret; - INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work); irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq, IRQF_SHARED, dev_name(dev), channel); if (irq < 0) dev_err(dev, "No irq handler (%d)\n", irq); + } + + if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) { + int ret; + channel->has_otg = true; channel->extcon = devm_extcon_dev_allocate(dev, rcar_gen3_phy_cable); -- cgit v1.1