From efbf62e9f4d93c3716a4d6d3221d537c71e299a2 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 11 Dec 2005 06:42:18 +0100 Subject: [PATCH] PCI: Reduce nr of ptr derefs in drivers/pci/hotplug/cpqphp_core.c Here's a small patch to reduce the nr of pointer dereferences in drivers/pci/hotplug/cpqphp_core.c Benefits of this patch: - micro speed optimization due to fewer pointer derefs - generated code is slightly smaller - tiny line length and whitespace cleanup - better readability Signed-off-by: Jesper Juhl Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/cpqphp_core.c | 121 +++++++++++++++++++++----------------- 1 file changed, 67 insertions(+), 54 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 9aed8ef..d364470 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -327,7 +327,9 @@ static int ctrl_slot_setup(struct controller *ctrl, void __iomem *smbios_start, void __iomem *smbios_table) { - struct slot *new_slot; + struct slot *slot; + struct hotplug_slot *hotplug_slot; + struct hotplug_slot_info *hotplug_slot_info; u8 number_of_slots; u8 slot_device; u8 slot_number; @@ -345,93 +347,105 @@ static int ctrl_slot_setup(struct controller *ctrl, slot_number = ctrl->first_slot; while (number_of_slots) { - new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL); - if (!new_slot) + slot = kmalloc(sizeof(*slot), GFP_KERNEL); + if (!slot) goto error; - memset(new_slot, 0, sizeof(struct slot)); - new_slot->hotplug_slot = kmalloc(sizeof(*(new_slot->hotplug_slot)), + memset(slot, 0, sizeof(struct slot)); + slot->hotplug_slot = kmalloc(sizeof(*(slot->hotplug_slot)), GFP_KERNEL); - if (!new_slot->hotplug_slot) + if (!slot->hotplug_slot) goto error_slot; - memset(new_slot->hotplug_slot, 0, sizeof(struct hotplug_slot)); + hotplug_slot = slot->hotplug_slot; + memset(hotplug_slot, 0, sizeof(struct hotplug_slot)); - new_slot->hotplug_slot->info = - kmalloc(sizeof(*(new_slot->hotplug_slot->info)), + hotplug_slot->info = + kmalloc(sizeof(*(hotplug_slot->info)), GFP_KERNEL); - if (!new_slot->hotplug_slot->info) + if (!hotplug_slot->info) goto error_hpslot; - memset(new_slot->hotplug_slot->info, 0, + hotplug_slot_info = hotplug_slot->info; + memset(hotplug_slot_info, 0, sizeof(struct hotplug_slot_info)); - new_slot->hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL); - if (!new_slot->hotplug_slot->name) + hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL); + + if (!hotplug_slot->name) goto error_info; - new_slot->ctrl = ctrl; - new_slot->bus = ctrl->bus; - new_slot->device = slot_device; - new_slot->number = slot_number; - dbg("slot->number = %d\n",new_slot->number); + slot->ctrl = ctrl; + slot->bus = ctrl->bus; + slot->device = slot_device; + slot->number = slot_number; + dbg("slot->number = %d\n", slot->number); slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, slot_entry); - while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) != new_slot->number)) { + while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) != + slot->number)) { slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, slot_entry); } - new_slot->p_sm_slot = slot_entry; + slot->p_sm_slot = slot_entry; - init_timer(&new_slot->task_event); - new_slot->task_event.expires = jiffies + 5 * HZ; - new_slot->task_event.function = cpqhp_pushbutton_thread; + init_timer(&slot->task_event); + slot->task_event.expires = jiffies + 5 * HZ; + slot->task_event.function = cpqhp_pushbutton_thread; //FIXME: these capabilities aren't used but if they are // they need to be correctly implemented - new_slot->capabilities |= PCISLOT_REPLACE_SUPPORTED; - new_slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED; + slot->capabilities |= PCISLOT_REPLACE_SUPPORTED; + slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED; - if (is_slot64bit(new_slot)) - new_slot->capabilities |= PCISLOT_64_BIT_SUPPORTED; - if (is_slot66mhz(new_slot)) - new_slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED; + if (is_slot64bit(slot)) + slot->capabilities |= PCISLOT_64_BIT_SUPPORTED; + if (is_slot66mhz(slot)) + slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED; if (ctrl->speed == PCI_SPEED_66MHz) - new_slot->capabilities |= PCISLOT_66_MHZ_OPERATION; + slot->capabilities |= PCISLOT_66_MHZ_OPERATION; - ctrl_slot = slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4); + ctrl_slot = + slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4); // Check presence - new_slot->capabilities |= ((((~tempdword) >> 23) | ((~tempdword) >> 15)) >> ctrl_slot) & 0x02; + slot->capabilities |= + ((((~tempdword) >> 23) | + ((~tempdword) >> 15)) >> ctrl_slot) & 0x02; // Check the switch state - new_slot->capabilities |= ((~tempdword & 0xFF) >> ctrl_slot) & 0x01; + slot->capabilities |= + ((~tempdword & 0xFF) >> ctrl_slot) & 0x01; // Check the slot enable - new_slot->capabilities |= ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04; + slot->capabilities |= + ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04; /* register this slot with the hotplug pci core */ - new_slot->hotplug_slot->release = &release_slot; - new_slot->hotplug_slot->private = new_slot; - make_slot_name(new_slot->hotplug_slot->name, SLOT_NAME_SIZE, new_slot); - new_slot->hotplug_slot->ops = &cpqphp_hotplug_slot_ops; + hotplug_slot->release = &release_slot; + hotplug_slot->private = slot; + make_slot_name(hotplug_slot->name, SLOT_NAME_SIZE, slot); + hotplug_slot->ops = &cpqphp_hotplug_slot_ops; - new_slot->hotplug_slot->info->power_status = get_slot_enabled(ctrl, new_slot); - new_slot->hotplug_slot->info->attention_status = cpq_get_attention_status(ctrl, new_slot); - new_slot->hotplug_slot->info->latch_status = cpq_get_latch_status(ctrl, new_slot); - new_slot->hotplug_slot->info->adapter_status = get_presence_status(ctrl, new_slot); + hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot); + hotplug_slot_info->attention_status = + cpq_get_attention_status(ctrl, slot); + hotplug_slot_info->latch_status = + cpq_get_latch_status(ctrl, slot); + hotplug_slot_info->adapter_status = + get_presence_status(ctrl, slot); - dbg ("registering bus %d, dev %d, number %d, " + dbg("registering bus %d, dev %d, number %d, " "ctrl->slot_device_offset %d, slot %d\n", - new_slot->bus, new_slot->device, - new_slot->number, ctrl->slot_device_offset, + slot->bus, slot->device, + slot->number, ctrl->slot_device_offset, slot_number); - result = pci_hp_register (new_slot->hotplug_slot); + result = pci_hp_register(hotplug_slot); if (result) { - err ("pci_hp_register failed with error %d\n", result); + err("pci_hp_register failed with error %d\n", result); goto error_name; } - new_slot->next = ctrl->slot; - ctrl->slot = new_slot; + slot->next = ctrl->slot; + ctrl->slot = slot; number_of_slots--; slot_device++; @@ -439,15 +453,14 @@ static int ctrl_slot_setup(struct controller *ctrl, } return 0; - error_name: - kfree(new_slot->hotplug_slot->name); + kfree(hotplug_slot->name); error_info: - kfree(new_slot->hotplug_slot->info); + kfree(hotplug_slot_info); error_hpslot: - kfree(new_slot->hotplug_slot); + kfree(hotplug_slot); error_slot: - kfree(new_slot); + kfree(slot); error: return result; } -- cgit v1.1