From 7b6e7ba8e81a862e20d213d90aa5ba1e5a02aba6 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 4 Mar 2016 14:31:48 -0800 Subject: PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices The cavium,pci-thunder-ecam devices are exactly ECAM-based PCI root complexes. These root complexes (loosely referred to as ECAM units in the hardware manuals) are used to access the Thunder on-chip devices. They are special in that all the BARs on devices behind these root complexes are at fixed addresses. Add a driver for these devices that synthesizes Enhanced Allocation (EA) capability entries for each BAR. Since this EA synthesis is needed for exactly two chip models, we can hard- code some assumptions about the device topology and the layout of the config space of specific DEVFNs in the driver. [bhelgaas: changelog, whitespace] Signed-off-by: David Daney Signed-off-by: Bjorn Helgaas Acked-by: Rob Herring --- drivers/pci/host/Kconfig | 7 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-thunder-ecam.c | 403 ++++++++++++++++++++++++++++++++++++ 3 files changed, 411 insertions(+) create mode 100644 drivers/pci/host/pci-thunder-ecam.c (limited to 'drivers/pci') diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 184df22..ad833a0 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -202,4 +202,11 @@ config PCI_HOST_THUNDER_PEM help Say Y here if you want PCIe support for CN88XX Cavium Thunder SoCs. +config PCI_HOST_THUNDER_ECAM + bool "Cavium Thunder ECAM controller to on-chip devices on pass-1.x silicon" + depends on OF && ARM64 + select PCI_HOST_COMMON + help + Say Y here if you want ECAM support for CN88XX-Pass-1.x Cavium Thunder SoCs. + endmenu diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 8903172..d6af3ba 100644 --- a/drivers/pci/host/Makefile +++ b/drivers/pci/host/Makefile @@ -23,4 +23,5 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o obj-$(CONFIG_PCI_HISI) += pcie-hisi.o obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o +obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o diff --git a/drivers/pci/host/pci-thunder-ecam.c b/drivers/pci/host/pci-thunder-ecam.c new file mode 100644 index 0000000..d71935cb --- /dev/null +++ b/drivers/pci/host/pci-thunder-ecam.c @@ -0,0 +1,403 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2015, 2016 Cavium, Inc. + */ + +#include +#include +#include +#include +#include +#include + +#include "pci-host-common.h" + +/* Mapping is standard ECAM */ +static void __iomem *thunder_ecam_map_bus(struct pci_bus *bus, + unsigned int devfn, + int where) +{ + struct gen_pci *pci = bus->sysdata; + resource_size_t idx = bus->number - pci->cfg.bus_range->start; + + return pci->cfg.win[idx] + ((devfn << 12) | where); +} + +static void set_val(u32 v, int where, int size, u32 *val) +{ + int shift = (where & 3) * 8; + + pr_debug("set_val %04x: %08x\n", (unsigned)(where & ~3), v); + v >>= shift; + if (size == 1) + v &= 0xff; + else if (size == 2) + v &= 0xffff; + *val = v; +} + +static int handle_ea_bar(u32 e0, int bar, struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 *val) +{ + void __iomem *addr; + u32 v; + + /* Entries are 16-byte aligned; bits[2,3] select word in entry */ + int where_a = where & 0xc; + + if (where_a == 0) { + set_val(e0, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0x4) { + addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */ + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + v = readl(addr); + v &= ~0xf; + v |= 2; /* EA entry-1. Base-L */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0x8) { + u32 barl_orig; + u32 barl_rb; + + addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */ + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + barl_orig = readl(addr + 0); + writel(0xffffffff, addr + 0); + barl_rb = readl(addr + 0); + writel(barl_orig, addr + 0); + /* zeros in unsettable bits */ + v = ~barl_rb & ~3; + v |= 0xc; /* EA entry-2. Offset-L */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xc) { + addr = bus->ops->map_bus(bus, devfn, bar + 4); /* BAR 1 */ + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + v = readl(addr); /* EA entry-3. Base-H */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int thunder_ecam_p2_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + struct gen_pci *pci = bus->sysdata; + int where_a = where & ~3; + void __iomem *addr; + u32 node_bits; + u32 v; + + /* EA Base[63:32] may be missing some bits ... */ + switch (where_a) { + case 0xa8: + case 0xbc: + case 0xd0: + case 0xe4: + break; + default: + return pci_generic_config_read(bus, devfn, where, size, val); + } + + addr = bus->ops->map_bus(bus, devfn, where_a); + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + v = readl(addr); + + /* + * Bit 44 of the 64-bit Base must match the same bit in + * the config space access window. Since we are working with + * the high-order 32 bits, shift everything down by 32 bits. + */ + node_bits = (pci->cfg.res.start >> 32) & (1 << 12); + + v |= node_bits; + set_val(v, where, size, val); + + return PCIBIOS_SUCCESSFUL; +} + +static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + u32 v; + u32 vendor_device; + u32 class_rev; + void __iomem *addr; + int cfg_type; + int where_a = where & ~3; + + addr = bus->ops->map_bus(bus, devfn, 0xc); + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + v = readl(addr); + + /* Check for non type-00 header */ + cfg_type = (v >> 16) & 0x7f; + + addr = bus->ops->map_bus(bus, devfn, 8); + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + class_rev = readl(addr); + if (class_rev == 0xffffffff) + goto no_emulation; + + if ((class_rev & 0xff) >= 8) { + /* Pass-2 handling */ + if (cfg_type) + goto no_emulation; + return thunder_ecam_p2_config_read(bus, devfn, where, + size, val); + } + + /* + * All BARs have fixed addresses specified by the EA + * capability; they must return zero on read. + */ + if (cfg_type == 0 && + ((where >= 0x10 && where < 0x2c) || + (where >= 0x1a4 && where < 0x1bc))) { + /* BAR or SR-IOV BAR */ + *val = 0; + return PCIBIOS_SUCCESSFUL; + } + + addr = bus->ops->map_bus(bus, devfn, 0); + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + vendor_device = readl(addr); + if (vendor_device == 0xffffffff) + goto no_emulation; + + pr_debug("%04x:%04x - Fix pass#: %08x, where: %03x, devfn: %03x\n", + vendor_device & 0xffff, vendor_device >> 16, class_rev, + (unsigned) where, devfn); + + /* Check for non type-00 header */ + if (cfg_type == 0) { + bool has_msix; + bool is_nic = (vendor_device == 0xa01e177d); + bool is_tns = (vendor_device == 0xa01f177d); + + addr = bus->ops->map_bus(bus, devfn, 0x70); + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + /* E_CAP */ + v = readl(addr); + has_msix = (v & 0xff00) != 0; + + if (!has_msix && where_a == 0x70) { + v |= 0xbc00; /* next capability is EA at 0xbc */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xb0) { + addr = bus->ops->map_bus(bus, devfn, where_a); + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + v = readl(addr); + if (v & 0xff00) + pr_err("Bad MSIX cap header: %08x\n", v); + v |= 0xbc00; /* next capability is EA at 0xbc */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xbc) { + if (is_nic) + v = 0x40014; /* EA last in chain, 4 entries */ + else if (is_tns) + v = 0x30014; /* EA last in chain, 3 entries */ + else if (has_msix) + v = 0x20014; /* EA last in chain, 2 entries */ + else + v = 0x10014; /* EA last in chain, 1 entry */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a >= 0xc0 && where_a < 0xd0) + /* EA entry-0. PP=0, BAR0 Size:3 */ + return handle_ea_bar(0x80ff0003, + 0x10, bus, devfn, where, + size, val); + if (where_a >= 0xd0 && where_a < 0xe0 && has_msix) + /* EA entry-1. PP=0, BAR4 Size:3 */ + return handle_ea_bar(0x80ff0043, + 0x20, bus, devfn, where, + size, val); + if (where_a >= 0xe0 && where_a < 0xf0 && is_tns) + /* EA entry-2. PP=0, BAR2, Size:3 */ + return handle_ea_bar(0x80ff0023, + 0x18, bus, devfn, where, + size, val); + if (where_a >= 0xe0 && where_a < 0xf0 && is_nic) + /* EA entry-2. PP=4, VF_BAR0 (9), Size:3 */ + return handle_ea_bar(0x80ff0493, + 0x1a4, bus, devfn, where, + size, val); + if (where_a >= 0xf0 && where_a < 0x100 && is_nic) + /* EA entry-3. PP=4, VF_BAR4 (d), Size:3 */ + return handle_ea_bar(0x80ff04d3, + 0x1b4, bus, devfn, where, + size, val); + } else if (cfg_type == 1) { + bool is_rsl_bridge = devfn == 0x08; + bool is_rad_bridge = devfn == 0xa0; + bool is_zip_bridge = devfn == 0xa8; + bool is_dfa_bridge = devfn == 0xb0; + bool is_nic_bridge = devfn == 0x10; + + if (where_a == 0x70) { + addr = bus->ops->map_bus(bus, devfn, where_a); + if (!addr) { + *val = ~0; + return PCIBIOS_DEVICE_NOT_FOUND; + } + v = readl(addr); + if (v & 0xff00) + pr_err("Bad PCIe cap header: %08x\n", v); + v |= 0xbc00; /* next capability is EA at 0xbc */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xbc) { + if (is_nic_bridge) + v = 0x10014; /* EA last in chain, 1 entry */ + else + v = 0x00014; /* EA last in chain, no entries */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xc0) { + if (is_rsl_bridge || is_nic_bridge) + v = 0x0101; /* subordinate:secondary = 1:1 */ + else if (is_rad_bridge) + v = 0x0202; /* subordinate:secondary = 2:2 */ + else if (is_zip_bridge) + v = 0x0303; /* subordinate:secondary = 3:3 */ + else if (is_dfa_bridge) + v = 0x0404; /* subordinate:secondary = 4:4 */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xc4 && is_nic_bridge) { + /* Enabled, not-Write, SP=ff, PP=05, BEI=6, ES=4 */ + v = 0x80ff0564; + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xc8 && is_nic_bridge) { + v = 0x00000002; /* Base-L 64-bit */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xcc && is_nic_bridge) { + v = 0xfffffffe; /* MaxOffset-L 64-bit */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xd0 && is_nic_bridge) { + v = 0x00008430; /* NIC Base-H */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + if (where_a == 0xd4 && is_nic_bridge) { + v = 0x0000000f; /* MaxOffset-H */ + set_val(v, where, size, val); + return PCIBIOS_SUCCESSFUL; + } + } +no_emulation: + return pci_generic_config_read(bus, devfn, where, size, val); +} + +static int thunder_ecam_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + /* + * All BARs have fixed addresses; ignore BAR writes so they + * don't get corrupted. + */ + if ((where >= 0x10 && where < 0x2c) || + (where >= 0x1a4 && where < 0x1bc)) + /* BAR or SR-IOV BAR */ + return PCIBIOS_SUCCESSFUL; + + return pci_generic_config_write(bus, devfn, where, size, val); +} + +static struct gen_pci_cfg_bus_ops thunder_ecam_bus_ops = { + .bus_shift = 20, + .ops = { + .map_bus = thunder_ecam_map_bus, + .read = thunder_ecam_config_read, + .write = thunder_ecam_config_write, + } +}; + +static const struct of_device_id thunder_ecam_of_match[] = { + { .compatible = "cavium,pci-host-thunder-ecam", + .data = &thunder_ecam_bus_ops }, + + { }, +}; +MODULE_DEVICE_TABLE(of, thunder_ecam_of_match); + +static int thunder_ecam_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *of_id; + struct gen_pci *pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL); + + if (!pci) + return -ENOMEM; + + of_id = of_match_node(thunder_ecam_of_match, dev->of_node); + pci->cfg.ops = (struct gen_pci_cfg_bus_ops *)of_id->data; + + return pci_host_common_probe(pdev, pci); +} + +static struct platform_driver thunder_ecam_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = thunder_ecam_of_match, + }, + .probe = thunder_ecam_probe, +}; +module_platform_driver(thunder_ecam_driver); + +MODULE_DESCRIPTION("Thunder ECAM PCI host driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.1