From 78bdcad05ea17fa1fe4644324b877162b1df4e16 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Tue, 28 Jul 2015 19:09:09 +0530 Subject: PCI: dra7xx: Add support to make GPIO drive PERST# line The PERST# line in am57x-evm is connected to a GPIO line and PERST# should be driven high to indicate the clocks are stable (As per Figure 2-10: Power Up of the PCIe CEM spec 3.0). Add support to make GPIO drive PERST# line. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Bjorn Helgaas --- drivers/pci/host/pci-dra7xx.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c index 3772aff..abb85a1 100644 --- a/drivers/pci/host/pci-dra7xx.c +++ b/drivers/pci/host/pci-dra7xx.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -336,6 +337,9 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; char name[10]; + int gpio_sel; + enum of_gpio_flags flags; + unsigned long gpio_flags; dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL); if (!dra7xx) @@ -398,6 +402,22 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) goto err_get_sync; } + gpio_sel = of_get_gpio_flags(dev->of_node, 0, &flags); + if (gpio_is_valid(gpio_sel)) { + gpio_flags = (flags & OF_GPIO_ACTIVE_LOW) ? + GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH; + ret = devm_gpio_request_one(dev, gpio_sel, gpio_flags, + "pcie_reset"); + if (ret) { + dev_err(&pdev->dev, "gpio%d request failed, ret %d\n", + gpio_sel, ret); + goto err_gpio; + } + } else if (gpio_sel == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto err_gpio; + } + reg = dra7xx_pcie_readl(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD); reg &= ~LTSSM_EN; dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg); @@ -406,11 +426,11 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev) ret = dra7xx_add_pcie_port(dra7xx, pdev); if (ret < 0) - goto err_add_port; + goto err_gpio; return 0; -err_add_port: +err_gpio: pm_runtime_put(dev); err_get_sync: -- cgit v1.1