From 24ad0ef9c8b946ed2abe681e4e44f4a1e643d882 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 28 Mar 2013 11:07:29 +0000 Subject: PCI/ACPI: Always resume devices on ACPI wakeup notifications It turns out that the _Lxx control methods provided by some BIOSes clear the PME Status bit of PCI devices they handle, which means that pci_acpi_wake_dev() cannot really use that bit to check whether or not the device has signalled wakeup. One symptom of the problem is, for example, that when an affected PCI USB controller is runtime-suspended, then plugging in a new USB device into one of the controller's ports will not wake up the controller, which should happen. For this reason, make pci_acpi_wake_dev() always attempt to resume the device it is called for regardless of the device's PME Status bit value (that bit still has to be cleared if set at this point, though). Reported-by: Sarah Sharp Signed-off-by: Rafael J. Wysocki Signed-off-by: Bjorn Helgaas Acked-by: Matthew Garrett CC: stable@vger.kernel.org # v3.7+ --- drivers/pci/pci-acpi.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) (limited to 'drivers/pci') diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index dee5ddd..5147c21 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -53,14 +53,15 @@ static void pci_acpi_wake_dev(acpi_handle handle, u32 event, void *context) return; } - if (!pci_dev->pm_cap || !pci_dev->pme_support - || pci_check_pme_status(pci_dev)) { - if (pci_dev->pme_poll) - pci_dev->pme_poll = false; + /* Clear PME Status if set. */ + if (pci_dev->pme_support) + pci_check_pme_status(pci_dev); - pci_wakeup_event(pci_dev); - pm_runtime_resume(&pci_dev->dev); - } + if (pci_dev->pme_poll) + pci_dev->pme_poll = false; + + pci_wakeup_event(pci_dev); + pm_runtime_resume(&pci_dev->dev); if (pci_dev->subordinate) pci_pme_wakeup_bus(pci_dev->subordinate); -- cgit v1.1