From 5a49f2036ad14092c11d09f186da86fd5ae49a05 Mon Sep 17 00:00:00 2001 From: Rajesh Shah Date: Wed, 23 Nov 2005 15:44:54 -0800 Subject: [PATCH] PCI Express Hotplug: clear sticky power-fault bit Per the PCI Express spec, the power-fault-detected bit in the slot status register can be set anytime hardware detects a power fault, regardless of whether the slot has a device populated in it or not. This bit is sticky and must be explicitly cleared. This patch is needed to allow hot-add after such a power fault has been detected. Signed-off-by: Rajesh Shah Signed-off-by: Greg Kroah-Hartman Signed-off-by: Linus Torvalds --- drivers/pci/hotplug/pciehp_ctrl.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) (limited to 'drivers/pci/hotplug/pciehp_ctrl.c') diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 5e582ec..83c4b86 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -207,7 +207,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) * power fault Cleared */ info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot); - p_slot->status = 0x00; taskInfo->event_type = INT_POWER_FAULT_CLEAR; } else { /* @@ -215,8 +214,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) */ info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot); taskInfo->event_type = INT_POWER_FAULT; - /* set power fault status for this board */ - p_slot->status = 0xFF; info("power fault bit %x set\n", hp_slot); } if (rc) @@ -317,13 +314,10 @@ static int board_added(struct slot *p_slot) return rc; } - dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status); - /* Check for a power fault */ - if (p_slot->status == 0xFF) { - /* power fault occurred, but it was benign */ + if (p_slot->hpc_ops->query_power_fault(p_slot)) { + dbg("%s: power fault detected\n", __FUNCTION__); rc = POWER_FAILURE; - p_slot->status = 0; goto err_exit; } @@ -334,8 +328,6 @@ static int board_added(struct slot *p_slot) goto err_exit; } - p_slot->status = 0; - /* * Some PCI Express root ports require fixup after hot-plug operation. */ @@ -382,9 +374,6 @@ static int remove_board(struct slot *p_slot) dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); - /* Change status to shutdown */ - p_slot->status = 0x01; - /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); -- cgit v1.1