From b8730b403aee94db4631bfefb546a6ce8c287dc2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 27 Mar 2013 20:49:58 +0100 Subject: iwlwifi: dvm: fix the passive-no-RX workaround Alex Romosan reported that since the mac80211 changes in "mac80211: start auth/assoc timeout on frame status" and the subsequent fixes in "mac80211: fix auth/assoc timeout handling" (commits 1672c0e31917 and 89afe614c0c) there's sometimes an issue connecting to a 5 GHz network with the iwlwifi DVM driver. The reason appears to be that since these commits any bad TX status makes mac80211 immediately try again, causing all of the authentication attempts to be quickly rejected by the firmware as it hasn't heard a beacon yet. Before, it would wait for the timeout regardless of status. To fix this, invoke the passive-no-RX workaround when not associated yet as well. This will cause the first frame to get lost, but then the driver will stop the queues and the second attempt will only be transmitted after hearing a beacon, thus delaying it appropriately to not make the firmware reject it again. Reported-by: Alex Romosan Tested-by: Alex Romosan Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/rxon.c | 18 ++++++++---------- drivers/net/wireless/iwlwifi/dvm/tx.c | 2 +- 2 files changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 23be948..a82b6b3 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1419,6 +1419,14 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, mutex_lock(&priv->mutex); + if (changes & BSS_CHANGED_IDLE && bss_conf->idle) { + /* + * If we go idle, then clearly no "passive-no-rx" + * workaround is needed any more, this is a reset. + */ + iwlagn_lift_passive_no_rx(priv); + } + if (unlikely(!iwl_is_ready(priv))) { IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); mutex_unlock(&priv->mutex); @@ -1450,16 +1458,6 @@ void iwlagn_bss_info_changed(struct ieee80211_hw *hw, priv->timestamp = bss_conf->sync_tsf; ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; } else { - /* - * If we disassociate while there are pending - * frames, just wake up the queues and let the - * frames "escape" ... This shouldn't really - * be happening to start with, but we should - * not get stuck in this case either since it - * can happen if userspace gets confused. - */ - iwlagn_lift_passive_no_rx(priv); - ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; if (ctx->ctxid == IWL_RXON_CTX_BSS) diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index 6aec2df..d1a670d 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1192,7 +1192,7 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, memset(&info->status, 0, sizeof(info->status)); if (status == TX_STATUS_FAIL_PASSIVE_NO_RX && - iwl_is_associated_ctx(ctx) && ctx->vif && + ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION) { /* block and stop all queues */ priv->passive_no_rx = true; -- cgit v1.1 From 901ceba4e81e9dd6b4a3c4c37ee22000a6c5c65f Mon Sep 17 00:00:00 2001 From: Stone Piao Date: Fri, 29 Mar 2013 19:21:21 -0700 Subject: mwifiex: limit channel number not to overflow memory Limit the channel number in scan request, or the driver scan config structure memory will be overflowed. Cc: # 3.5+ Signed-off-by: Stone Piao Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a44023a..8aaf56a 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1892,7 +1892,8 @@ mwifiex_cfg80211_scan(struct wiphy *wiphy, } } - for (i = 0; i < request->n_channels; i++) { + for (i = 0; i < min_t(u32, request->n_channels, + MWIFIEX_USER_SCAN_CHAN_MAX); i++) { chan = request->channels[i]; priv->user_scan_cfg->chan_list[i].chan_number = chan->hw_value; priv->user_scan_cfg->chan_list[i].radio_type = chan->band; -- cgit v1.1 From e2409d83434d77874b461b78af6a19cd6e6a1280 Mon Sep 17 00:00:00 2001 From: hayeswang Date: Sun, 31 Mar 2013 17:02:04 +0000 Subject: r8169: fix auto speed down issue It would cause no link after suspending or shutdowning when the nic changes the speed to 10M and connects to a link partner which forces the speed to 100M. Check the link partner ability to determine which speed to set. Signed-off-by: Hayes Wang Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 28 +++++++++++++++++++++++++--- 1 file changed, 25 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 28fb50a..4ecbe64 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -3818,6 +3818,30 @@ static void rtl_init_mdio_ops(struct rtl8169_private *tp) } } +static void rtl_speed_down(struct rtl8169_private *tp) +{ + u32 adv; + int lpa; + + rtl_writephy(tp, 0x1f, 0x0000); + lpa = rtl_readphy(tp, MII_LPA); + + if (lpa & (LPA_10HALF | LPA_10FULL)) + adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full; + else if (lpa & (LPA_100HALF | LPA_100FULL)) + adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; + else + adv = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | + (tp->mii.supports_gmii ? + ADVERTISED_1000baseT_Half | + ADVERTISED_1000baseT_Full : 0); + + rtl8169_set_speed(tp->dev, AUTONEG_ENABLE, SPEED_1000, DUPLEX_FULL, + adv); +} + static void rtl_wol_suspend_quirk(struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; @@ -3848,9 +3872,7 @@ static bool rtl_wol_pll_power_down(struct rtl8169_private *tp) if (!(__rtl8169_get_wol(tp) & WAKE_ANY)) return false; - rtl_writephy(tp, 0x1f, 0x0000); - rtl_writephy(tp, MII_BMCR, 0x0000); - + rtl_speed_down(tp); rtl_wol_suspend_quirk(tp); return true; -- cgit v1.1 From 31d1670e73f4911fe401273a8f576edc9c2b5fea Mon Sep 17 00:00:00 2001 From: Hannes Frederic Sowa Date: Tue, 2 Apr 2013 14:36:46 +0000 Subject: atl1e: limit gso segment size to prevent generation of wrong ip length fields The limit of 0x3c00 is taken from the windows driver. Suggested-by: Huang, Xiong Cc: Huang, Xiong Cc: Eric Dumazet Signed-off-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atl1e/atl1e.h | 2 +- drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e.h b/drivers/net/ethernet/atheros/atl1e/atl1e.h index edfdf6b..b5fd934 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e.h +++ b/drivers/net/ethernet/atheros/atl1e/atl1e.h @@ -186,7 +186,7 @@ struct atl1e_tpd_desc { /* how about 0x2000 */ #define MAX_TX_BUF_LEN 0x2000 #define MAX_TX_BUF_SHIFT 13 -/*#define MAX_TX_BUF_LEN 0x3000 */ +#define MAX_TSO_SEG_SIZE 0x3c00 /* rrs word 1 bit 0:31 */ #define RRS_RX_CSUM_MASK 0xFFFF diff --git a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c index f73d560..ac25f05 100644 --- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c +++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c @@ -2329,6 +2329,7 @@ static int atl1e_probe(struct pci_dev *pdev, const struct pci_device_id *ent) INIT_WORK(&adapter->reset_task, atl1e_reset_task); INIT_WORK(&adapter->link_chg_task, atl1e_link_chg_task); + netif_set_gso_max_size(netdev, MAX_TSO_SEG_SIZE); err = register_netdev(netdev); if (err) { netdev_err(netdev, "register netdevice failed\n"); -- cgit v1.1 From 4de79c737b200492195ebc54a887075327e1ec1d Mon Sep 17 00:00:00 2001 From: Veaceslav Falico Date: Wed, 3 Apr 2013 05:46:33 +0000 Subject: bonding: remove sysfs before removing devices We have a race condition if we try to rmmod bonding and simultaneously add a bond master through sysfs. In bonding_exit() we first remove the devices (through rtnl_link_unregister() ) and only after that we remove the sysfs. If we manage to add a device through sysfs after that the devices were removed - we'll end up with that device/sysfs structure and with the module unloaded. Fix this by first removing the sysfs and only after that calling rtnl_link_unregister(). Signed-off-by: Veaceslav Falico Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index a51241b..171b10f1 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4902,8 +4902,8 @@ static void __exit bonding_exit(void) bond_destroy_debugfs(); - rtnl_link_unregister(&bond_link_ops); unregister_pernet_subsys(&bond_net_ops); + rtnl_link_unregister(&bond_link_ops); #ifdef CONFIG_NET_POLL_CONTROLLER /* -- cgit v1.1 From f01fc1a82c2ee68726b400fadb156bd623b5f2f1 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 3 Apr 2013 16:50:54 +0000 Subject: ixgbe: fix registration order of driver and DCA nofitication ixgbe_notify_dca cannot be called before driver registration because it expects driver's klist_devices to be allocated and initialized. While on it make sure debugfs files are removed when registration fails. Cc: stable Signed-off-by: Jakub Kicinski Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index db5611a..79f4a26 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -7922,12 +7922,19 @@ static int __init ixgbe_init_module(void) ixgbe_dbg_init(); #endif /* CONFIG_DEBUG_FS */ + ret = pci_register_driver(&ixgbe_driver); + if (ret) { +#ifdef CONFIG_DEBUG_FS + ixgbe_dbg_exit(); +#endif /* CONFIG_DEBUG_FS */ + return ret; + } + #ifdef CONFIG_IXGBE_DCA dca_register_notify(&dca_notifier); #endif - ret = pci_register_driver(&ixgbe_driver); - return ret; + return 0; } module_init(ixgbe_init_module); -- cgit v1.1 From cb28ea3b13b86fb23448525f34720e659bda7aa8 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Sun, 7 Apr 2013 05:36:23 +0000 Subject: bnx2x: Fix KR2 rapid link flap Check KR2 recovery time at the beginning of the work-around function. Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 77ebae0..0283f34 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -13437,13 +13437,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params, { struct bnx2x *bp = params->bp; u16 base_page, next_page, not_kr2_device, lane; - int sigdet = bnx2x_warpcore_get_sigdet(phy, params); - - if (!sigdet) { - if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) - bnx2x_kr2_recovery(params, vars, phy); - return; - } + int sigdet; /* Once KR2 was disabled, wait 5 seconds before checking KR2 recovery * since some switches tend to reinit the AN process and clear the @@ -13454,6 +13448,16 @@ static void bnx2x_check_kr2_wa(struct link_params *params, vars->check_kr2_recovery_cnt--; return; } + + sigdet = bnx2x_warpcore_get_sigdet(phy, params); + if (!sigdet) { + if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { + bnx2x_kr2_recovery(params, vars, phy); + DP(NETIF_MSG_LINK, "No sigdet\n"); + } + return; + } + lane = bnx2x_get_warpcore_lane(phy, params); CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, MDIO_AER_BLOCK_AER_REG, lane); -- cgit v1.1