From c506a5090272752932be6ac0c29ffcbca38f2404 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 27 Jun 2005 11:33:09 -0700 Subject: [PATCH] skge: remove Yukon2 related special cases Remove the bits and pieces added relating to Yukon II chipset. The Yukon 2 will be in a separate driver. Signed-off-by: Stephen Hemminger --- drivers/net/skge.c | 54 +++++++----------------------------------------------- 1 file changed, 7 insertions(+), 47 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 8fd7981..c29e187 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -205,9 +205,6 @@ static int skge_get_settings(struct net_device *dev, if (hw->chip_id == CHIP_ID_YUKON) ecmd->supported &= ~SUPPORTED_1000baseT_Half; - else if (hw->chip_id == CHIP_ID_YUKON_FE) - ecmd->supported &= ~(SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full); } ecmd->port = PORT_TP; @@ -248,9 +245,6 @@ static u32 skge_modes(const struct skge_hw *hw) modes &= ~ADVERTISED_1000baseT_Half; break; - case CHIP_ID_YUKON_FE: - modes &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full); - break; } } else { modes |= ADVERTISED_FIBRE; @@ -270,8 +264,6 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) } else { switch (ecmd->speed) { case SPEED_1000: - if (hw->chip_id == CHIP_ID_YUKON_FE) - return -EINVAL; break; case SPEED_100: case SPEED_10: @@ -540,8 +532,6 @@ static inline u32 hwkhz(const struct skge_hw *hw) { if (hw->chip_id == CHIP_ID_GENESIS) return 53215; /* or: 53.125 MHz */ - else if (hw->chip_id == CHIP_ID_YUKON_EC) - return 125000; /* or: 125.000 MHz */ else return 78215; /* or: 78.125 MHz */ } @@ -1598,11 +1588,7 @@ static void yukon_init(struct skge_hw *hw, int port) PHY_M_EC_MAC_S_MSK); ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); - /* on PHY 88E1111 there is a change for downshift control */ - if (hw->chip_id == CHIP_ID_YUKON_EC) - ectrl |= PHY_M_EC_M_DSC_2(0) | PHY_M_EC_DOWN_S_ENA; - else - ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); + ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); } @@ -1688,8 +1674,7 @@ static void yukon_init(struct skge_hw *hw, int port) ctrl |= PHY_CT_RESET; } - if (hw->chip_id != CHIP_ID_YUKON_FE) - gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); + gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); @@ -1698,22 +1683,10 @@ static void yukon_init(struct skge_hw *hw, int port) ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); ledover = 0; - if (hw->chip_id == CHIP_ID_YUKON_FE) { - /* on 88E3082 these bits are at 11..9 (shifted left) */ - ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; - gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, - ((gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR) - - & ~PHY_M_FELP_LED1_MSK) - | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL))); - } else { - /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ - ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; - - /* turn off the Rx LED (LED_RX) */ - ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); - } + /* turn off the Rx LED (LED_RX) */ + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); /* disable blink mode (LED_DUPLEX) on collisions */ ctrl |= PHY_M_LEDC_DP_CTRL; @@ -1928,9 +1901,6 @@ static void yukon_mac_intr(struct skge_hw *hw, int port) static u16 yukon_speed(const struct skge_hw *hw, u16 aux) { - if (hw->chip_id == CHIP_ID_YUKON_FE) - return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; - switch (aux & PHY_M_PS_SPEED_MSK) { case PHY_M_PS_SPEED_1000: return SPEED_1000; @@ -1975,8 +1945,7 @@ static void yukon_link_down(struct skge_port *skge) gm_phy_read(hw, port, GM_GP_CTRL) & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA)); - if (hw->chip_id != CHIP_ID_YUKON_FE && - skge->flow_control == FLOW_MODE_REM_SEND) { + if (skge->flow_control == FLOW_MODE_REM_SEND) { /* restore Asymmetric Pause bit */ gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, gm_phy_read(hw, port, @@ -2009,9 +1978,7 @@ static void yukon_phy_intr(struct skge_port *skge) goto failed; } - if (!(hw->chip_id == CHIP_ID_YUKON_FE || hw->chip_id == CHIP_ID_YUKON_EC) - && (gm_phy_read(hw, port, PHY_MARV_1000T_STAT) - & PHY_B_1000S_MSF)) { + if (gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) { reason = "master/slave fault"; goto failed; } @@ -2025,10 +1992,6 @@ static void yukon_phy_intr(struct skge_port *skge) ? DUPLEX_FULL : DUPLEX_HALF; skge->speed = yukon_speed(hw, phystat); - /* Tx & Rx Pause Enabled bits are at 9..8 */ - if (hw->chip_id == CHIP_ID_YUKON_XL) - phystat >>= 6; - /* We are using IEEE 802.3z/D5.0 Table 37-4 */ switch (phystat & PHY_M_PS_PAUSE_MSK) { case PHY_M_PS_PAUSE_MSK: @@ -2875,9 +2838,6 @@ static const struct { { CHIP_ID_YUKON, "Yukon" }, { CHIP_ID_YUKON_LITE, "Yukon-Lite"}, { CHIP_ID_YUKON_LP, "Yukon-LP"}, - { CHIP_ID_YUKON_XL, "Yukon-2 XL"}, - { CHIP_ID_YUKON_EC, "YUKON-2 EC"}, - { CHIP_ID_YUKON_FE, "YUKON-2 FE"}, }; static const char *skge_board_name(const struct skge_hw *hw) -- cgit v1.1