From c2d3db8c7cbb94e77461627085b85d74dc64d716 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Mon, 16 Jul 2007 18:26:43 -0700 Subject: [BNX2]: Add delay before reading firmware version. The management firmware may still be loading during bnx2_init_one() because of the D3hot -> D0 transition and the firmware version may not be available without waiting a bit. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 311c859..28399d8 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -4143,10 +4143,6 @@ bnx2_init_chip(struct bnx2 *bp) REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_EVENTS); - if (REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_FEATURE) & - BNX2_PORT_FEATURE_ASF_ENABLED) - bp->flags |= ASF_ENABLE_FLAG; - /* Initialize the receive filter. */ bnx2_set_rx_mode(bp->dev); @@ -6645,6 +6641,18 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if (i != 2) bp->fw_version[j++] = '.'; } + if (REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_FEATURE) & + BNX2_PORT_FEATURE_ASF_ENABLED) { + bp->flags |= ASF_ENABLE_FLAG; + + for (i = 0; i < 30; i++) { + reg = REG_RD_IND(bp, bp->shmem_base + + BNX2_BC_STATE_CONDITION); + if (reg & BNX2_CONDITION_MFW_RUN_MASK) + break; + msleep(10); + } + } reg = REG_RD_IND(bp, bp->shmem_base + BNX2_BC_STATE_CONDITION); reg &= BNX2_CONDITION_MFW_RUN_MASK; if (reg != BNX2_CONDITION_MFW_RUN_UNKNOWN && -- cgit v1.1