From 31304165ffb888483e0f7c805876f25f493a3049 Mon Sep 17 00:00:00 2001 From: Torsten Kaiser Date: Mon, 9 Apr 2012 05:14:15 +0000 Subject: net: Fix misplaced parenthesis in virtio_net.c Commit 2e57b79ccef1ff1422fdf45a9b28fe60f8f084f7 misplaced its parenthesis and now tx_fifo_errors will only be incremented if an ENOMEM error is not written to the syslog. Correct the parenthesis and indentation to the original goal of counting all non ENOMEM errors and ratelimiting only the messages. Signed-of-by: Torsten Kaiser Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 4de2760..af8acc8 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -626,16 +626,15 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev) /* This can happen with OOM and indirect buffers. */ if (unlikely(capacity < 0)) { if (likely(capacity == -ENOMEM)) { - if (net_ratelimit()) { + if (net_ratelimit()) dev_warn(&dev->dev, "TX queue failure: out of memory\n"); - } else { + } else { dev->stats.tx_fifo_errors++; if (net_ratelimit()) dev_warn(&dev->dev, "Unexpected TX queue failure: %d\n", capacity); - } } dev->stats.tx_dropped++; kfree_skb(skb); -- cgit v1.1 From 5f614e6b7005685b3e34da0742f79389c858c7e1 Mon Sep 17 00:00:00 2001 From: "sjur.brandeland@stericsson.com" Date: Thu, 12 Apr 2012 08:18:08 +0000 Subject: caif-hsi: Free flip_buffer at shutdown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix memory leak of RX flip-buffer. Signed-off-by: Sjur Brændeland Signed-off-by: David S. Miller --- drivers/net/caif/caif_hsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index 9a66e2a..d0d9a6f 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -1210,7 +1210,7 @@ int cfhsi_probe(struct platform_device *pdev) static void cfhsi_shutdown(struct cfhsi *cfhsi) { - u8 *tx_buf, *rx_buf; + u8 *tx_buf, *rx_buf, *flip_buf; /* Stop TXing */ netif_tx_stop_all_queues(cfhsi->ndev); @@ -1234,7 +1234,7 @@ static void cfhsi_shutdown(struct cfhsi *cfhsi) /* Store bufferes: will be freed later. */ tx_buf = cfhsi->tx_buf; rx_buf = cfhsi->rx_buf; - + flip_buf = cfhsi->rx_flip_buf; /* Flush transmit queues. */ cfhsi_abort_tx(cfhsi); @@ -1247,6 +1247,7 @@ static void cfhsi_shutdown(struct cfhsi *cfhsi) /* Free buffers. */ kfree(tx_buf); kfree(rx_buf); + kfree(flip_buf); } int cfhsi_remove(struct platform_device *pdev) -- cgit v1.1 From d62f8dbb5b7771910f7c4657345df8ac93acb832 Mon Sep 17 00:00:00 2001 From: Kim Lilliestierna XX Date: Thu, 12 Apr 2012 08:18:09 +0000 Subject: caif_hsi: use dev_dbg not dev_err for reporting Use dev_dbg instead of dev_err for reporting in cfhsi_wakeup_cb. Signed-off-by: Kim Lilliestierna Signed-off-by: David S. Miller --- drivers/net/caif/caif_hsi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/caif/caif_hsi.c b/drivers/net/caif/caif_hsi.c index d0d9a6f..9c1c8cd 100644 --- a/drivers/net/caif/caif_hsi.c +++ b/drivers/net/caif/caif_hsi.c @@ -744,14 +744,14 @@ static void cfhsi_wake_up(struct work_struct *work) size_t fifo_occupancy = 0; /* Wakeup timeout */ - dev_err(&cfhsi->ndev->dev, "%s: Timeout.\n", + dev_dbg(&cfhsi->ndev->dev, "%s: Timeout.\n", __func__); /* Check FIFO to check if modem has sent something. */ WARN_ON(cfhsi->dev->cfhsi_fifo_occupancy(cfhsi->dev, &fifo_occupancy)); - dev_err(&cfhsi->ndev->dev, "%s: Bytes in FIFO: %u.\n", + dev_dbg(&cfhsi->ndev->dev, "%s: Bytes in FIFO: %u.\n", __func__, (unsigned) fifo_occupancy); /* Check if we misssed the interrupt. */ -- cgit v1.1 From 9a5d2bd99e0dfe9a31b3c160073ac445ba3d773f Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Sun, 8 Apr 2012 10:01:44 +0000 Subject: ppp: Fix race condition with queue start/stop Commit e675f0cc9a872fd152edc0c77acfed19bf28b81e ("ppp: Don't stop and restart queue on every TX packet") introduced a race condition which could leave the net queue stopped even when the channel is no longer busy. By calling netif_stop_queue() from ppp_start_xmit(), based on the return value from ppp_xmit_process() but *after* all the locks have been dropped, we could potentially do so *after* the channel has actually finished transmitting and attempted to re-wake the queue. Fix this by moving the netif_stop_queue() into ppp_xmit_process() under the xmit lock. I hadn't done this previously, because it gets called from other places than ppp_start_xmit(). But I now think it's the better option. The net queue *should* be stopped if the channel becomes congested due to writes from pppd, anyway. Signed-off-by: David Woodhouse Signed-off-by: David S. Miller --- drivers/net/ppp/ppp_generic.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ppp/ppp_generic.c b/drivers/net/ppp/ppp_generic.c index 33f8c51..21d7151 100644 --- a/drivers/net/ppp/ppp_generic.c +++ b/drivers/net/ppp/ppp_generic.c @@ -235,7 +235,7 @@ struct ppp_net { /* Prototypes. */ static int ppp_unattached_ioctl(struct net *net, struct ppp_file *pf, struct file *file, unsigned int cmd, unsigned long arg); -static int ppp_xmit_process(struct ppp *ppp); +static void ppp_xmit_process(struct ppp *ppp); static void ppp_send_frame(struct ppp *ppp, struct sk_buff *skb); static void ppp_push(struct ppp *ppp); static void ppp_channel_push(struct channel *pch); @@ -969,8 +969,7 @@ ppp_start_xmit(struct sk_buff *skb, struct net_device *dev) put_unaligned_be16(proto, pp); skb_queue_tail(&ppp->file.xq, skb); - if (!ppp_xmit_process(ppp)) - netif_stop_queue(dev); + ppp_xmit_process(ppp); return NETDEV_TX_OK; outf: @@ -1048,11 +1047,10 @@ static void ppp_setup(struct net_device *dev) * Called to do any work queued up on the transmit side * that can now be done. */ -static int +static void ppp_xmit_process(struct ppp *ppp) { struct sk_buff *skb; - int ret = 0; ppp_xmit_lock(ppp); if (!ppp->closing) { @@ -1062,13 +1060,12 @@ ppp_xmit_process(struct ppp *ppp) ppp_send_frame(ppp, skb); /* If there's no work left to do, tell the core net code that we can accept some more. */ - if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq)) { + if (!ppp->xmit_pending && !skb_peek(&ppp->file.xq)) netif_wake_queue(ppp->dev); - ret = 1; - } + else + netif_stop_queue(ppp->dev); } ppp_xmit_unlock(ppp); - return ret; } static inline struct sk_buff * -- cgit v1.1 From 03662e41c7cff64a776bfb1b3816de4be43de881 Mon Sep 17 00:00:00 2001 From: Tony Zelenoff Date: Wed, 11 Apr 2012 06:15:03 +0000 Subject: atl1: fix kernel panic in case of DMA errors Problem: There was two separate work_struct structures which share one handler. Unfortunately getting atl1_adapter structure from work_struct in case of DMA error was done from incorrect offset which cause kernel panics. Solution: The useless work_struct for DMA error removed and handler name changed to more generic one. Signed-off-by: Tony Zelenoff Signed-off-by: David S. Miller --- drivers/net/ethernet/atheros/atlx/atl1.c | 12 +++++------- drivers/net/ethernet/atheros/atlx/atl1.h | 3 +-- drivers/net/ethernet/atheros/atlx/atlx.c | 2 +- 3 files changed, 7 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c index 40ac414..c926857 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.c +++ b/drivers/net/ethernet/atheros/atlx/atl1.c @@ -2476,7 +2476,7 @@ static irqreturn_t atl1_intr(int irq, void *data) "pcie phy link down %x\n", status); if (netif_running(adapter->netdev)) { /* reset MAC */ iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); + schedule_work(&adapter->reset_dev_task); return IRQ_HANDLED; } } @@ -2488,7 +2488,7 @@ static irqreturn_t atl1_intr(int irq, void *data) "pcie DMA r/w error (status = 0x%x)\n", status); iowrite32(0, adapter->hw.hw_addr + REG_IMR); - schedule_work(&adapter->pcie_dma_to_rst_task); + schedule_work(&adapter->reset_dev_task); return IRQ_HANDLED; } @@ -2633,10 +2633,10 @@ static void atl1_down(struct atl1_adapter *adapter) atl1_clean_rx_ring(adapter); } -static void atl1_tx_timeout_task(struct work_struct *work) +static void atl1_reset_dev_task(struct work_struct *work) { struct atl1_adapter *adapter = - container_of(work, struct atl1_adapter, tx_timeout_task); + container_of(work, struct atl1_adapter, reset_dev_task); struct net_device *netdev = adapter->netdev; netif_device_detach(netdev); @@ -3038,12 +3038,10 @@ static int __devinit atl1_probe(struct pci_dev *pdev, (unsigned long)adapter); adapter->phy_timer_pending = false; - INIT_WORK(&adapter->tx_timeout_task, atl1_tx_timeout_task); + INIT_WORK(&adapter->reset_dev_task, atl1_reset_dev_task); INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task); - INIT_WORK(&adapter->pcie_dma_to_rst_task, atl1_tx_timeout_task); - err = register_netdev(netdev); if (err) goto err_common; diff --git a/drivers/net/ethernet/atheros/atlx/atl1.h b/drivers/net/ethernet/atheros/atlx/atl1.h index 109d6da..e04bf4d 100644 --- a/drivers/net/ethernet/atheros/atlx/atl1.h +++ b/drivers/net/ethernet/atheros/atlx/atl1.h @@ -758,9 +758,8 @@ struct atl1_adapter { u16 link_speed; u16 link_duplex; spinlock_t lock; - struct work_struct tx_timeout_task; + struct work_struct reset_dev_task; struct work_struct link_chg_task; - struct work_struct pcie_dma_to_rst_task; struct timer_list phy_config_timer; bool phy_timer_pending; diff --git a/drivers/net/ethernet/atheros/atlx/atlx.c b/drivers/net/ethernet/atheros/atlx/atlx.c index 3cd8837..c9e9dc5 100644 --- a/drivers/net/ethernet/atheros/atlx/atlx.c +++ b/drivers/net/ethernet/atheros/atlx/atlx.c @@ -194,7 +194,7 @@ static void atlx_tx_timeout(struct net_device *netdev) { struct atlx_adapter *adapter = netdev_priv(netdev); /* Do the reset outside of interrupt context */ - schedule_work(&adapter->tx_timeout_task); + schedule_work(&adapter->reset_dev_task); } /* -- cgit v1.1 From a8c9cb106fe79c28d6b7f1397652cadd228715ff Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Wed, 11 Apr 2012 22:10:54 +0000 Subject: 8139cp: set intr mask after its handler is registered We set intr mask before its handler is registered, this does not work well when 8139cp is sharing irq line with other devices. As the irq could be enabled by the device before 8139cp's hander is registered which may lead unhandled irq. Fix this by introducing an helper cp_irq_enable() and call it after request_irq(). Signed-off-by: Jason Wang Reviewed-by: Flavio Leitner Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/8139cp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index abc7907..b3287c0 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -958,6 +958,11 @@ static inline void cp_start_hw (struct cp_private *cp) cpw8(Cmd, RxOn | TxOn); } +static void cp_enable_irq(struct cp_private *cp) +{ + cpw16_f(IntrMask, cp_intr_mask); +} + static void cp_init_hw (struct cp_private *cp) { struct net_device *dev = cp->dev; @@ -997,8 +1002,6 @@ static void cp_init_hw (struct cp_private *cp) cpw16(MultiIntr, 0); - cpw16_f(IntrMask, cp_intr_mask); - cpw8_f(Cfg9346, Cfg9346_Lock); } @@ -1130,6 +1133,8 @@ static int cp_open (struct net_device *dev) if (rc) goto err_out_hw; + cp_enable_irq(cp); + netif_carrier_off(dev); mii_check_media(&cp->mii_if, netif_msg_link(cp), true); netif_start_queue(dev); @@ -2031,6 +2036,7 @@ static int cp_resume (struct pci_dev *pdev) /* FIXME: sh*t may happen if the Rx ring buffer is depleted */ cp_init_rings_index (cp); cp_init_hw (cp); + cp_enable_irq(cp); netif_start_queue (dev); spin_lock_irqsave (&cp->lock, flags); -- cgit v1.1 From 59a54f3082b9847c1240e24879750e3a03f96754 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 12 Apr 2012 01:11:12 +0000 Subject: drivers/net/ethernet/xilinx/axi ethernet: Correct Copyright Also fix MAINTAINERS file to reflect autorship. Daniel and Ariane changed coding style but not any functional changes in the driver itself. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/xilinx_axienet.h | 4 +--- drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 6 +++--- drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 6 +++--- 3 files changed, 7 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h index cc83af0..44b8d2b 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet.h +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -2,9 +2,7 @@ * Definitions for Xilinx Axi Ethernet device driver. * * Copyright (c) 2009 Secret Lab Technologies, Ltd. - * Copyright (c) 2010 Xilinx, Inc. All rights reserved. - * Copyright (c) 2012 Daniel Borkmann, - * Copyright (c) 2012 Ariane Keller, + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. */ #ifndef XILINX_AXIENET_H diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 2fcbeba..9c365e1 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -4,9 +4,9 @@ * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. * Copyright (c) 2008-2009 Secret Lab Technologies Ltd. - * Copyright (c) 2010 Xilinx, Inc. All rights reserved. - * Copyright (c) 2012 Daniel Borkmann, - * Copyright (c) 2012 Ariane Keller, + * Copyright (c) 2010 - 2011 Michal Simek + * Copyright (c) 2010 - 2011 PetaLogix + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. * * This is a driver for the Xilinx Axi Ethernet which is used in the Virtex6 * and Spartan6. diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c index d70b6e7..e90e1f4 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -2,9 +2,9 @@ * MDIO bus driver for the Xilinx Axi Ethernet device * * Copyright (c) 2009 Secret Lab Technologies, Ltd. - * Copyright (c) 2010 Xilinx, Inc. All rights reserved. - * Copyright (c) 2012 Daniel Borkmann, - * Copyright (c) 2012 Ariane Keller, + * Copyright (c) 2010 - 2011 Michal Simek + * Copyright (c) 2010 - 2011 PetaLogix + * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. */ #include -- cgit v1.1 From 51c61a2838c33dab7b6659b9a3e008bb1b40bc9b Mon Sep 17 00:00:00 2001 From: Matt Renzelmann Date: Fri, 13 Apr 2012 07:59:40 +0000 Subject: ks8851: Fix missing mutex_lock/unlock Move the ks8851_rdreg16 call above the call to request_irq and cache the result for subsequent repeated use. A spurious interrupt may otherwise cause a crash. Thanks to Stephen Boyd, Flavio Leitner, and Ben Hutchings for feedback. Signed-off-by: Matt Renzelmann Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index c722aa6..e5dc075 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -1418,6 +1418,7 @@ static int __devinit ks8851_probe(struct spi_device *spi) struct net_device *ndev; struct ks8851_net *ks; int ret; + unsigned cider; ndev = alloc_etherdev(sizeof(struct ks8851_net)); if (!ndev) @@ -1484,8 +1485,8 @@ static int __devinit ks8851_probe(struct spi_device *spi) ks8851_soft_reset(ks, GRR_GSR); /* simple check for a valid chip being connected to the bus */ - - if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) { + cider = ks8851_rdreg16(ks, KS_CIDER); + if ((cider & ~CIDER_REV_MASK) != CIDER_ID) { dev_err(&spi->dev, "failed to read device ID\n"); ret = -ENODEV; goto err_id; @@ -1516,8 +1517,7 @@ static int __devinit ks8851_probe(struct spi_device *spi) } netdev_info(ndev, "revision %d, MAC %pM, IRQ %d, %s EEPROM\n", - CIDER_REV_GET(ks8851_rdreg16(ks, KS_CIDER)), - ndev->dev_addr, ndev->irq, + CIDER_REV_GET(cider), ndev->dev_addr, ndev->irq, ks->rc_ccr & CCR_EEPROM ? "has" : "no"); return 0; -- cgit v1.1 From effcc625eb4ab3b10b4744237fd37e8f7dcd6511 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Wed, 28 Mar 2012 11:38:01 -0700 Subject: libertas: fix signedness bug in lbs_auth_to_authtype() Return type for lbs_auth_to_authtype() is changed from "u8" to "int" to return negative error code correctly. Also an error check is added in connect handler for invalid auth type. Reported-by: Dan Carpenter Signed-off-by: Amitkumar Karwar Signed-off-by: Kiran Divekar Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/cfg.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 3fa1ece..2fa879b 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -103,7 +103,7 @@ static const u32 cipher_suites[] = { * Convert NL80211's auth_type to the one from Libertas, see chapter 5.9.1 * in the firmware spec */ -static u8 lbs_auth_to_authtype(enum nl80211_auth_type auth_type) +static int lbs_auth_to_authtype(enum nl80211_auth_type auth_type) { int ret = -ENOTSUPP; @@ -1411,7 +1411,12 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, goto done; } - lbs_set_authtype(priv, sme); + ret = lbs_set_authtype(priv, sme); + if (ret == -ENOTSUPP) { + wiphy_err(wiphy, "unsupported authtype 0x%x\n", sme->auth_type); + goto done; + } + lbs_set_radio(priv, preamble, 1); /* Do the actual association */ -- cgit v1.1 From badc4f07622f0f7093a201638f45e85765f1b5e4 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 11 Apr 2012 11:52:51 +0200 Subject: brcm80211: smac: resume transmit fifo upon receiving frames There have been reports about not being able to use access-points on channel 12 and 13 or having connectivity issues when these channels were part of the selected regulatory domain. Upon switching to these channels the brcmsmac driver suspends the transmit dma fifos. This patch resumes them upon handing over the first received beacon to mac80211. This patch is to be applied to the stable tree for kernel versions 3.2 and 3.3. Cc: stable@vger.kernel.org Tested-by: Francesco Saverio Schiavarelli Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Brett Rudley Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 231ddf4..7083db7 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -7614,6 +7614,7 @@ brcms_c_recvctl(struct brcms_c_info *wlc, struct d11rxhdr *rxh, { int len_mpdu; struct ieee80211_rx_status rx_status; + struct ieee80211_hdr *hdr; memset(&rx_status, 0, sizeof(rx_status)); prep_mac80211_status(wlc, rxh, p, &rx_status); @@ -7623,6 +7624,13 @@ brcms_c_recvctl(struct brcms_c_info *wlc, struct d11rxhdr *rxh, skb_pull(p, D11_PHY_HDR_LEN); __skb_trim(p, len_mpdu); + /* unmute transmit */ + if (wlc->hw->suspended_fifos) { + hdr = (struct ieee80211_hdr *)p->data; + if (ieee80211_is_beacon(hdr->frame_control)) + brcms_b_mute(wlc->hw, false); + } + memcpy(IEEE80211_SKB_RXCB(p), &rx_status, sizeof(rx_status)); ieee80211_rx_irqsafe(wlc->pub->ieee_hw, p); } -- cgit v1.1 From 32b92f4f3f261697a49f944e31920dbcbbd4ad01 Mon Sep 17 00:00:00 2001 From: Jonathan Bither Date: Thu, 12 Apr 2012 06:13:33 -0400 Subject: ath5k: fix undefined 'THIS_MODULE' When cross compiling ath5k for a Mips machine with kernel 3.2.14 the compilation fails with "/ath5k/ahb.c:231:12: error: 'THIS_MODULE' undeclared here (not in a function)" Fix the build by including Signed-off-by: Jonathan Bither Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ahb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index 8faa129..47b6c35 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include "ath5k.h" #include "debug.h" -- cgit v1.1 From 2db0d2ba97801fb57c91e99b9e22b2a24c32d3d7 Mon Sep 17 00:00:00 2001 From: Jonathan Bither Date: Thu, 12 Apr 2012 07:03:09 -0400 Subject: ath5k: unmap io memory on probe failure Signed-off-by: Jonathan Bither Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ahb.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index 47b6c35..8c50d9d 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -120,7 +120,7 @@ static int ath_ahb_probe(struct platform_device *pdev) if (res == NULL) { dev_err(&pdev->dev, "no IRQ resource found\n"); ret = -ENXIO; - goto err_out; + goto err_iounmap; } irq = res->start; @@ -129,7 +129,7 @@ static int ath_ahb_probe(struct platform_device *pdev) if (hw == NULL) { dev_err(&pdev->dev, "no memory for ieee80211_hw\n"); ret = -ENOMEM; - goto err_out; + goto err_iounmap; } ah = hw->priv; @@ -186,6 +186,8 @@ static int ath_ahb_probe(struct platform_device *pdev) err_free_hw: ieee80211_free_hw(hw); platform_set_drvdata(pdev, NULL); + err_iounmap: + iounmap(mem); err_out: return ret; } -- cgit v1.1 From 75600abf1991657580233570400009e85f861787 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 12 Apr 2012 20:36:31 +0200 Subject: ath9k: wake up the hardware from full sleep when idle is turned off The hardware needs a reset to recover from full sleep. Issue this reset directly in the ath9k_config call that turns off idle, otherwise tx remains dead until the first channel change after the idle state change Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 2504ab0..798ea57 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1548,6 +1548,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); struct ieee80211_conf *conf = &hw->conf; + bool reset_channel = false; ath9k_ps_wakeup(sc); mutex_lock(&sc->mutex); @@ -1556,6 +1557,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE); if (sc->ps_idle) ath_cancel_work(sc); + else + /* + * The chip needs a reset to properly wake up from + * full sleep + */ + reset_channel = ah->chip_fullsleep; } /* @@ -1584,7 +1591,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) } } - if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + if ((changed & IEEE80211_CONF_CHANGE_CHANNEL) || reset_channel) { struct ieee80211_channel *curchan = hw->conf.channel; int pos = curchan->hw_value; int old_pos = -1; -- cgit v1.1 From 428ca8a7065354877db63ceabfc493107686eebe Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Thu, 12 Apr 2012 19:00:35 -0700 Subject: mwifiex: update pcie8766 scratch register addresses The scratch register addresses have been changed for newer chips. Since the old chip was never shipped and it will not be supported any more, just update register addresses to support the new chips. Cc: # 3.2.y, 3.3.y Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 445ff21..2f218f9 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -48,15 +48,15 @@ #define PCIE_HOST_INT_STATUS_MASK 0xC3C #define PCIE_SCRATCH_2_REG 0xC40 #define PCIE_SCRATCH_3_REG 0xC44 -#define PCIE_SCRATCH_4_REG 0xCC0 -#define PCIE_SCRATCH_5_REG 0xCC4 -#define PCIE_SCRATCH_6_REG 0xCC8 -#define PCIE_SCRATCH_7_REG 0xCCC -#define PCIE_SCRATCH_8_REG 0xCD0 -#define PCIE_SCRATCH_9_REG 0xCD4 -#define PCIE_SCRATCH_10_REG 0xCD8 -#define PCIE_SCRATCH_11_REG 0xCDC -#define PCIE_SCRATCH_12_REG 0xCE0 +#define PCIE_SCRATCH_4_REG 0xCD0 +#define PCIE_SCRATCH_5_REG 0xCD4 +#define PCIE_SCRATCH_6_REG 0xCD8 +#define PCIE_SCRATCH_7_REG 0xCDC +#define PCIE_SCRATCH_8_REG 0xCE0 +#define PCIE_SCRATCH_9_REG 0xCE4 +#define PCIE_SCRATCH_10_REG 0xCE8 +#define PCIE_SCRATCH_11_REG 0xCEC +#define PCIE_SCRATCH_12_REG 0xCF0 #define CPU_INTR_DNLD_RDY BIT(0) #define CPU_INTR_DOOR_BELL BIT(1) -- cgit v1.1 From 3c5e979bd037888dd7d722da22da4b43659af485 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 12 Apr 2012 05:54:09 +0000 Subject: net: smsc911x: fix skb handling in receive path The SMSC911x driver resets the ->head, ->data and ->tail pointers in the skb on the reset path in order to avoid buffer overflow due to packet padding performed by the hardware. This patch fixes the receive path so that the skb pointers are fixed up after the data has been read from the device, The error path is also fixed to use number of words consistently and prevent erroneous FIFO fastforwarding when skipping over bad data. Signed-off-by: Will Deacon Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 4a69710..5aa2dbe 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -1166,10 +1166,8 @@ smsc911x_rx_counterrors(struct net_device *dev, unsigned int rxstat) /* Quickly dumps bad packets */ static void -smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktbytes) +smsc911x_rx_fastforward(struct smsc911x_data *pdata, unsigned int pktwords) { - unsigned int pktwords = (pktbytes + NET_IP_ALIGN + 3) >> 2; - if (likely(pktwords >= 4)) { unsigned int timeout = 500; unsigned int val; @@ -1233,7 +1231,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) continue; } - skb = netdev_alloc_skb(dev, pktlength + NET_IP_ALIGN); + skb = netdev_alloc_skb(dev, pktwords << 2); if (unlikely(!skb)) { SMSC_WARN(pdata, rx_err, "Unable to allocate skb for rx packet"); @@ -1243,14 +1241,12 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) break; } - skb->data = skb->head; - skb_reset_tail_pointer(skb); + pdata->ops->rx_readfifo(pdata, + (unsigned int *)skb->data, pktwords); /* Align IP on 16B boundary */ skb_reserve(skb, NET_IP_ALIGN); skb_put(skb, pktlength - 4); - pdata->ops->rx_readfifo(pdata, - (unsigned int *)skb->head, pktwords); skb->protocol = eth_type_trans(skb, dev); skb_checksum_none_assert(skb); netif_receive_skb(skb); @@ -1565,7 +1561,7 @@ static int smsc911x_open(struct net_device *dev) smsc911x_reg_write(pdata, FIFO_INT, temp); /* set RX Data offset to 2 bytes for alignment */ - smsc911x_reg_write(pdata, RX_CFG, (2 << 8)); + smsc911x_reg_write(pdata, RX_CFG, (NET_IP_ALIGN << 8)); /* enable NAPI polling before enabling RX interrupts */ napi_enable(&pdata->napi); -- cgit v1.1 From 92fe173391b3e0d0a7212fa8b9d72c8d61f31c26 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 12 Apr 2012 06:27:03 +0000 Subject: e1000e: issues in Sx on 82577/8/9 A workaround was previously put in the driver to reset the device when transitioning to Sx in order to activate the changed settings of the PHY OEM bits (Low Power Link Up, or LPLU, and GbE disable configuration) for 82577/8/9 devices. After further review, it was found such a reset can cause the 82579 to confuse which version of 82579 it actually is and broke LPLU on all 82577/8/9 devices. The workaround during an S0->Sx transition on 82579 (instead of resetting the PHY) is to restart auto-negotiation after the OEM bits are configured; the restart of auto-negotiation activates the new OEM bits as does the reset. With 82577/8, the reset is changed to a generic reset which fixes the LPLU bits getting set wrong. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index 64c7644..b461c24 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1310,10 +1310,6 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) if (mac_reg & E1000_PHY_CTRL_D0A_LPLU) oem_reg |= HV_OEM_BITS_LPLU; - - /* Set Restart auto-neg to activate the bits */ - if (!hw->phy.ops.check_reset_block(hw)) - oem_reg |= HV_OEM_BITS_RESTART_AN; } else { if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE | E1000_PHY_CTRL_NOND0A_GBE_DISABLE)) @@ -1324,6 +1320,11 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) oem_reg |= HV_OEM_BITS_LPLU; } + /* Set Restart auto-neg to activate the bits */ + if ((d0_state || (hw->mac.type != e1000_pchlan)) && + !hw->phy.ops.check_reset_block(hw)) + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg); release: @@ -3682,7 +3683,11 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) if (hw->mac.type >= e1000_pchlan) { e1000_oem_bits_config_ich8lan(hw, false); - e1000_phy_hw_reset_ich8lan(hw); + + /* Reset PHY to activate OEM bits on 82577/8 */ + if (hw->mac.type == e1000_pchlan) + e1000e_phy_hw_reset_generic(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return; -- cgit v1.1 From c509e754af96882eb46130e215cc4aa8f763d4ac Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Thu, 5 Apr 2012 08:12:05 +0000 Subject: ixgbe: fix WoL issue with fiber There are times we turn of the laser before shutdown. This is a bad thing if we want to wake on lan to work so now we make sure the laser is on before shutdown if we support WoL. Signed-off-by: Don Skidmore Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 3e26b1f..dac7c01 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4893,6 +4893,16 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) if (wufc) { ixgbe_set_rx_mode(netdev); + /* + * enable the optics for both mult-speed fiber and + * 82599 SFP+ fiber as we can WoL. + */ + if (hw->mac.ops.enable_tx_laser && + (hw->phy.multispeed_fiber || + (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber && + hw->mac.type == ixgbe_mac_82599EB))) + hw->mac.ops.enable_tx_laser(hw); + /* turn on all-multi mode if wake on multicast is enabled */ if (wufc & IXGBE_WUFC_MC) { fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); -- cgit v1.1 From 8a9a0ea6032186e3030419262678d652b88bf6a8 Mon Sep 17 00:00:00 2001 From: Davide Ciminaghi Date: Fri, 13 Apr 2012 04:48:25 +0000 Subject: net/ethernet: ks8851_mll fix rx frame buffer overflow At the beginning of ks_rcv(), a for loop retrieves the header information relevant to all the frames stored in the mac's internal buffers. The number of pending frames is stored as an 8 bits field in KS_RXFCTR. If interrupts are disabled long enough to allow for more than 32 frames to accumulate in the MAC's internal buffers, a buffer overflow occurs. This patch fixes the problem by making the driver's frame_head_info buffer big enough. Well actually, since the chip appears to have 12K of internal rx buffers and the shortest ethernet frame should be 64 bytes long, maybe the limit could be set to 12*1024/64 = 192 frames, but 255 should be safer. Signed-off-by: Davide Ciminaghi Signed-off-by: Raffaele Recalcati Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851_mll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c index b8104d9..5ffde23 100644 --- a/drivers/net/ethernet/micrel/ks8851_mll.c +++ b/drivers/net/ethernet/micrel/ks8851_mll.c @@ -40,7 +40,7 @@ #define DRV_NAME "ks8851_mll" static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 }; -#define MAX_RECV_FRAMES 32 +#define MAX_RECV_FRAMES 255 #define MAX_BUF_SIZE 2048 #define TX_BUF_SIZE 2000 #define RX_BUF_SIZE 2000 -- cgit v1.1 From a49bcabedc18319f673319d5e71b5751e3978179 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 11 Apr 2012 23:23:41 +0200 Subject: can: usb: PCAN-USB Pro: fix mem leaks in pcan_usb_pro_init() on error paths If either call to pcan_usb_pro_send_req() in drivers/net/can/usb/peak_usb/pcan_usb_pro.c::pcan_usb_pro_init() fails, we'll leak the memory we allocated to 'usb_if' with kzalloc() when the 'usb_if' variable goes out of scope without having been assigned to anything as we 'return err;'. Fix this by adding appropriate kfree(usb_if) calls to the error paths. Signed-off-by: Jesper Juhl Acked-by: Stephane Grosjean Signed-off-by: Marc Kleine-Budde --- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 5234586..629c4ba 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -875,6 +875,7 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) PCAN_USBPRO_INFO_FW, &fi, sizeof(fi)); if (err) { + kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s firmware info (err %d)\n", pcan_usb_pro.name, err); @@ -885,6 +886,7 @@ static int pcan_usb_pro_init(struct peak_usb_device *dev) PCAN_USBPRO_INFO_BL, &bi, sizeof(bi)); if (err) { + kfree(usb_if); dev_err(dev->netdev->dev.parent, "unable to read %s bootloader info (err %d)\n", pcan_usb_pro.name, err); -- cgit v1.1 From a99ff7d0123b19ecad3b589480b6542716ab6b52 Mon Sep 17 00:00:00 2001 From: Stephane Fillod Date: Sun, 15 Apr 2012 11:38:29 +0000 Subject: net: usb: smsc75xx: fix mtu Make smsc75xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1492 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7936c01d5b426c03a691eca082b03f2b9. Tested on ARM/Omap3 with EVB-LAN7500-LC. Signed-off-by: Stephane Fillod Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 187d01c..a234948 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1051,6 +1051,7 @@ static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &smsc75xx_ethtool_ops; dev->net->flags |= IFF_MULTICAST; dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; return 0; } -- cgit v1.1 From 890fdf2a0cb88202d1427589db2cf29c1bdd3c1d Mon Sep 17 00:00:00 2001 From: Hiroaki SHIMODA Date: Sun, 15 Apr 2012 13:26:01 +0000 Subject: dummy: Add ndo_uninit(). In register_netdevice(), when ndo_init() is successful and later some error occurred, ndo_uninit() will be called. So dummy deivce is desirable to implement ndo_uninit() method to free percpu stats for this case. And, ndo_uninit() is also called along with dev->destructor() when device is unregistered, so in order to prevent dev->dstats from being freed twice, dev->destructor is modified to free_netdev(). Signed-off-by: Hiroaki SHIMODA Signed-off-by: David S. Miller --- drivers/net/dummy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/dummy.c b/drivers/net/dummy.c index d5c6d92..442d91a 100644 --- a/drivers/net/dummy.c +++ b/drivers/net/dummy.c @@ -107,14 +107,14 @@ static int dummy_dev_init(struct net_device *dev) return 0; } -static void dummy_dev_free(struct net_device *dev) +static void dummy_dev_uninit(struct net_device *dev) { free_percpu(dev->dstats); - free_netdev(dev); } static const struct net_device_ops dummy_netdev_ops = { .ndo_init = dummy_dev_init, + .ndo_uninit = dummy_dev_uninit, .ndo_start_xmit = dummy_xmit, .ndo_validate_addr = eth_validate_addr, .ndo_set_rx_mode = set_multicast_list, @@ -128,7 +128,7 @@ static void dummy_setup(struct net_device *dev) /* Initialize the device structure. */ dev->netdev_ops = &dummy_netdev_ops; - dev->destructor = dummy_dev_free; + dev->destructor = free_netdev; /* Fill in device structure with ethernet-generic values. */ dev->tx_queue_len = 0; -- cgit v1.1 From fd09c85fe15aa66a69f091ba178817d5ef82476d Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 17 Apr 2012 08:34:50 +0530 Subject: ath9k: Fix TX fragmentation Assigning sequence number for frames without taking care of the fragment field breaks transmission of fragmented frames. Fix this by assigning the fragment number properly. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 834e6bc..23eaa1b 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1820,6 +1820,7 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc, struct ath_frame_info *fi = get_frame_info(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ath_buf *bf; + int fragno; u16 seqno; bf = ath_tx_get_buffer(sc); @@ -1831,9 +1832,16 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc, ATH_TXBUF_RESET(bf); if (tid) { + fragno = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG; seqno = tid->seq_next; hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT); - INCR(tid->seq_next, IEEE80211_SEQ_MAX); + + if (fragno) + hdr->seq_ctrl |= cpu_to_le16(fragno); + + if (!ieee80211_has_morefrags(hdr->frame_control)) + INCR(tid->seq_next, IEEE80211_SEQ_MAX); + bf->bf_state.seqno = seqno; } -- cgit v1.1 From 34948a947d1a576c10afee6d14792fd237549577 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Fri, 6 Apr 2012 07:20:21 +0000 Subject: ixgbe: add missing rtnl_lock in PM resume path Upon resume from standby, ixgbe may trigger the ASSERT_RTNL() in netif_set_real_num_tx_queues(). The call stack is: netif_set_real_num_tx_queues ixgbe_set_num_queues ixgbe_init_interrupt_scheme ixgbe_resume Signed-off-by: Benjamin Poirier Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index dac7c01..9e2be8c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4836,7 +4836,9 @@ static int ixgbe_resume(struct pci_dev *pdev) pci_wake_from_d3(pdev, false); + rtnl_lock(); err = ixgbe_init_interrupt_scheme(adapter); + rtnl_unlock(); if (err) { e_dev_err("Cannot initialize interrupts for device\n"); return err; -- cgit v1.1 From b2db497eb25510052fc2d3152384f964b3312004 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 7 Apr 2012 04:57:29 +0000 Subject: ixgbe: Identify FCoE rings earlier to resolve memory corruption w/ FCoE This patch makes it so that we identify FCoE rings earlier than ixgbe_set_rx_buffer_len. Instead we identify the Rx FCoE rings at allocation time in ixgbe_alloc_q_vector. The motivation behind this change is to avoid memory corruption when FCoE is enabled. Without this change we were initializing the rings at 0, and 2K on systems with 4K pages, then when we bumped the buffer size to 4K with order 1 pages we were accessing offsets 2K and 6K instead of 0 and 4K. This was resulting in memory corruptions. Signed-off-by: Alexander Duyck Acked-by: Yi Zou Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c | 10 ++++++++++ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 -------- 2 files changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c index 027d7a7..ed1b47d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c @@ -622,6 +622,16 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, int v_idx, if (adapter->hw.mac.type == ixgbe_mac_82599EB) set_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state); +#ifdef IXGBE_FCOE + if (adapter->netdev->features & NETIF_F_FCOE_MTU) { + struct ixgbe_ring_feature *f; + f = &adapter->ring_feature[RING_F_FCOE]; + if ((rxr_idx >= f->mask) && + (rxr_idx < f->mask + f->indices)) + set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state); + } + +#endif /* IXGBE_FCOE */ /* apply Rx specific ring traits */ ring->count = adapter->rx_ring_count; ring->queue_index = rxr_idx; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 9e2be8c..a7f3cd8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -3154,14 +3154,6 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) set_ring_rsc_enabled(rx_ring); else clear_ring_rsc_enabled(rx_ring); -#ifdef IXGBE_FCOE - if (netdev->features & NETIF_F_FCOE_MTU) { - struct ixgbe_ring_feature *f; - f = &adapter->ring_feature[RING_F_FCOE]; - if ((i >= f->mask) && (i < f->mask + f->indices)) - set_bit(__IXGBE_RX_FCOE_BUFSZ, &rx_ring->state); - } -#endif /* IXGBE_FCOE */ } } -- cgit v1.1 From b95465c8fcd7c8619ff9ff7bbf8038ab31c7f34b Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 16 Apr 2012 02:02:48 +0000 Subject: arcnet: rimi: Fix device name in debug output arcrimi_probe() calls BUGMSG() before register_netdev() happens. BUGMSG() itself prints dev->name, but as the format string hasn't been expanded by register_netdev() yet, the output contains bogus device name such as arc%d: Given: node 00h, shmem 0h, irq 0 As we don't know the device name yet, just drop the prefix completely from the debugging messages. Reported-by: Steven Young Signed-off-by: Jiri Kosina Signed-off-by: David S. Miller --- drivers/net/arcnet/arc-rimi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arcnet/arc-rimi.c b/drivers/net/arcnet/arc-rimi.c index 25197b6..b8b4c7b 100644 --- a/drivers/net/arcnet/arc-rimi.c +++ b/drivers/net/arcnet/arc-rimi.c @@ -89,16 +89,16 @@ static int __init arcrimi_probe(struct net_device *dev) BUGLVL(D_NORMAL) printk(VERSION); BUGLVL(D_NORMAL) printk("E-mail me if you actually test the RIM I driver, please!\n"); - BUGMSG(D_NORMAL, "Given: node %02Xh, shmem %lXh, irq %d\n", + BUGLVL(D_NORMAL) printk("Given: node %02Xh, shmem %lXh, irq %d\n", dev->dev_addr[0], dev->mem_start, dev->irq); if (dev->mem_start <= 0 || dev->irq <= 0) { - BUGMSG(D_NORMAL, "No autoprobe for RIM I; you " + BUGLVL(D_NORMAL) printk("No autoprobe for RIM I; you " "must specify the shmem and irq!\n"); return -ENODEV; } if (dev->dev_addr[0] == 0) { - BUGMSG(D_NORMAL, "You need to specify your card's station " + BUGLVL(D_NORMAL) printk("You need to specify your card's station " "ID!\n"); return -ENODEV; } @@ -109,7 +109,7 @@ static int __init arcrimi_probe(struct net_device *dev) * will be taken. */ if (!request_mem_region(dev->mem_start, MIRROR_SIZE, "arcnet (90xx)")) { - BUGMSG(D_NORMAL, "Card memory already allocated\n"); + BUGLVL(D_NORMAL) printk("Card memory already allocated\n"); return -ENODEV; } return arcrimi_found(dev); -- cgit v1.1 From 5b76d0600b2b08eef77f8e9226938b7b6bde3099 Mon Sep 17 00:00:00 2001 From: Christian Riesch Date: Mon, 16 Apr 2012 04:35:25 +0000 Subject: davinci_mdio: Fix MDIO timeout check Under heavy load (flood ping) it is possible for the MDIO timeout to expire before the loop checks the GO bit again. This patch adds an additional check whether the operation was done before actually returning -ETIMEDOUT. To reproduce this bug, flood ping the device, e.g., ping -f -l 1000 After some time, a "timed out waiting for user access" warning may appear. And even worse, link may go down since the PHY reported a timeout. Signed-off-by: Christian Riesch Cc: Cc: Cyril Chemparathy Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_mdio.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c index 2757c7d..e4e4708 100644 --- a/drivers/net/ethernet/ti/davinci_mdio.c +++ b/drivers/net/ethernet/ti/davinci_mdio.c @@ -181,6 +181,11 @@ static inline int wait_for_user_access(struct davinci_mdio_data *data) __davinci_mdio_reset(data); return -EAGAIN; } + + reg = __raw_readl(®s->user[0].access); + if ((reg & USERACCESS_GO) == 0) + return 0; + dev_err(data->dev, "timed out waiting for user access\n"); return -ETIMEDOUT; } -- cgit v1.1 From 48159f009f5f92ef5962e7c278ac615d74242fa5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Apr 2012 05:22:12 +0000 Subject: drivers/net/wan/farsync.c: add missing iounmap Free card->mem in the error-handling code since it was successfully allocated just above. Signed-off-by: Julia Lawall Signed-off-by: David S. Miller --- drivers/net/wan/farsync.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/wan/farsync.c b/drivers/net/wan/farsync.c index ebb9f24..1a62318 100644 --- a/drivers/net/wan/farsync.c +++ b/drivers/net/wan/farsync.c @@ -2483,6 +2483,7 @@ fst_add_one(struct pci_dev *pdev, const struct pci_device_id *ent) pr_err("Control memory remap failed\n"); pci_release_regions(pdev); pci_disable_device(pdev); + iounmap(card->mem); kfree(card); return -ENODEV; } -- cgit v1.1 From 716af4abd6e6370226f567af50bfaca274515980 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 19 Apr 2012 10:00:19 +0300 Subject: ksz884x: don't copy too much in netdev_set_mac_address() MAX_ADDR_LEN is 32. ETH_ALEN is 6. mac->sa_data is a 14 byte array, so the memcpy() is doing a read past the end of the array. I asked about this on netdev and Ben Hutchings told me it's supposed to be copying ETH_ALEN bytes (thanks Ben). Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ksz884x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c index ef723b1..eaf9ff0 100644 --- a/drivers/net/ethernet/micrel/ksz884x.c +++ b/drivers/net/ethernet/micrel/ksz884x.c @@ -5675,7 +5675,7 @@ static int netdev_set_mac_address(struct net_device *dev, void *addr) memcpy(hw->override_addr, mac->sa_data, ETH_ALEN); } - memcpy(dev->dev_addr, mac->sa_data, MAX_ADDR_LEN); + memcpy(dev->dev_addr, mac->sa_data, ETH_ALEN); interrupt = hw_block_intr(hw); -- cgit v1.1 From 7e5998aa74065d3ab31d17e667f40ffebf4b8425 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 17 Apr 2012 20:53:42 +0000 Subject: bnx2x: off by one in bnx2x_ets_e3b0_sp_pri_to_cos_set() The sp_pri_to_cos[] array size depends on the config but lets say it is BX_E3B0_MAX_NUM_COS_PORT0 and max_num_of_cos is also DCBX_E3B0_MAX_NUM_COS_PORT0. In the original code "pri == max_num_of_cos" was accepted but it is one past the end of the array. Also we used "pri" before capping it. It's a harmless read past the end of the array, but it would affect which error message gets printed. Signed-off-by: Dan Carpenter Acked-by: Eilon Greenstein Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index ad95324..64392ec 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -942,6 +942,12 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params, const u8 max_num_of_cos = (port) ? DCBX_E3B0_MAX_NUM_COS_PORT1 : DCBX_E3B0_MAX_NUM_COS_PORT0; + if (pri >= max_num_of_cos) { + DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " + "parameter Illegal strict priority\n"); + return -EINVAL; + } + if (sp_pri_to_cos[pri] != DCBX_INVALID_COS) { DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " "parameter There can't be two COS's with " @@ -949,12 +955,6 @@ static int bnx2x_ets_e3b0_sp_pri_to_cos_set(const struct link_params *params, return -EINVAL; } - if (pri > max_num_of_cos) { - DP(NETIF_MSG_LINK, "bnx2x_ets_e3b0_sp_pri_to_cos_set invalid " - "parameter Illegal strict priority\n"); - return -EINVAL; - } - sp_pri_to_cos[pri] = cos_entry; return 0; -- cgit v1.1 From 3bc17d10c9f8ac67eb474737d74894ef2e60d27c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 17 Apr 2012 09:38:23 +0000 Subject: net: qmi_wwan: support Sierra Wireless MC77xx devices in QMI mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MC77xx devices can operate in two modes: "Direct IP" or "QMI", switchable using a password protected AT command. Both product ID and USB interface configuration will change when switched. The "sierra_net" driver supports the "Direct IP" mode. This driver supports the "QMI" mode. There are also multiple possible USB interface configurations in each mode, some providing more than one wwan interface. Like many other devices made for Windows, different interface types are identified using a static interface number. We define a Sierra specific interface whitelist to support this. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 552d24b..d316503b 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -365,6 +365,27 @@ static const struct driver_info qmi_wwan_force_int4 = { .data = BIT(4), /* interface whitelist bitmap */ }; +/* Sierra Wireless provide equally useless interface descriptors + * Devices in QMI mode can be switched between two different + * configurations: + * a) USB interface #8 is QMI/wwan + * b) USB interfaces #8, #19 and #20 are QMI/wwan + * + * Both configurations provide a number of other interfaces (serial++), + * some of which have the same endpoint configuration as we expect, so + * a whitelist or blacklist is necessary. + * + * FIXME: The below whitelist should include BIT(20). It does not + * because I cannot get it to work... + */ +static const struct driver_info qmi_wwan_sierra = { + .description = "Sierra Wireless wwan/QMI device", + .flags = FLAG_WWAN, + .bind = qmi_wwan_bind_gobi, + .unbind = qmi_wwan_unbind_shared, + .manage_power = qmi_wwan_manage_power, + .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ +}; #define HUAWEI_VENDOR_ID 0x12D1 #define QMI_GOBI_DEVICE(vend, prod) \ @@ -445,6 +466,15 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_force_int4, }, + { /* Sierra Wireless MC77xx in QMI mode */ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x1199, + .idProduct = 0x68a2, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + .driver_info = (unsigned long)&qmi_wwan_sierra, + }, {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ -- cgit v1.1 From 996f73937cd85031da8dbcd3222a710cb762d428 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Tue, 17 Apr 2012 21:16:40 +0000 Subject: icplus: fix interrupt for IC+ 101A/G and 1001LF This patch fixes and adds the irq handler for the IC+ 101A/G where we need to read the reg17 to clean the irq. Also remove the flag for the 1001LF where no interrupt can be used for this device. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/phy/icplus.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c index f08c85a..5ac46f5 100644 --- a/drivers/net/phy/icplus.c +++ b/drivers/net/phy/icplus.c @@ -40,6 +40,7 @@ MODULE_LICENSE("GPL"); #define IP1001_PHASE_SEL_MASK 3 /* IP1001 RX/TXPHASE_SEL */ #define IP1001_APS_ON 11 /* IP1001 APS Mode bit */ #define IP101A_G_APS_ON 2 /* IP101A/G APS Mode bit */ +#define IP101A_G_IRQ_CONF_STATUS 0x11 /* Conf Info IRQ & Status Reg */ static int ip175c_config_init(struct phy_device *phydev) { @@ -185,6 +186,15 @@ static int ip175c_config_aneg(struct phy_device *phydev) return 0; } +static int ip101a_g_ack_interrupt(struct phy_device *phydev) +{ + int err = phy_read(phydev, IP101A_G_IRQ_CONF_STATUS); + if (err < 0) + return err; + + return 0; +} + static struct phy_driver ip175c_driver = { .phy_id = 0x02430d80, .name = "ICPlus IP175C", @@ -204,7 +214,6 @@ static struct phy_driver ip1001_driver = { .phy_id_mask = 0x0ffffff0, .features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, - .flags = PHY_HAS_INTERRUPT, .config_init = &ip1001_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, @@ -220,6 +229,7 @@ static struct phy_driver ip101a_g_driver = { .features = PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause, .flags = PHY_HAS_INTERRUPT, + .ack_interrupt = ip101a_g_ack_interrupt, .config_init = &ip101a_g_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, -- cgit v1.1 From c5a99937a9cf74a623384023201a7d98b51e7e3b Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 18 Apr 2012 17:25:58 +0000 Subject: ks8851: Fix mutex deadlock in ks8851_net_stop() There is a potential deadlock scenario when the ks8851 driver is removed. The interrupt handler schedules a workqueue which acquires a mutex that ks8851_net_stop() also acquires before flushing the workqueue. Previously lockdep wouldn't be able to find this problem but now that it has the support we can trigger this lockdep warning by rmmoding the driver after an ifconfig up. Fix the possible deadlock by disabling the interrupts in the chip and then release the lock across the workqueue flushing. The mutex is only there to proect the registers anyway so this should be ok. ======================================================= [ INFO: possible circular locking dependency detected ] 3.0.21-00021-g8b33780-dirty #2911 ------------------------------------------------------- rmmod/125 is trying to acquire lock: ((&ks->irq_work)){+.+...}, at: [] flush_work+0x0/0xac but task is already holding lock: (&ks->lock){+.+...}, at: [] ks8851_net_stop+0x64/0x138 [ks8851] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ks->lock){+.+...}: [] __lock_acquire+0x940/0x9f8 [] lock_acquire+0x10c/0x130 [] mutex_lock_nested+0x68/0x3dc [] ks8851_irq_work+0x24/0x46c [ks8851] [] process_one_work+0x2d8/0x518 [] worker_thread+0x220/0x3a0 [] kthread+0x88/0x94 [] kernel_thread_exit+0x0/0x8 -> #0 ((&ks->irq_work)){+.+...}: [] validate_chain+0x914/0x1018 [] __lock_acquire+0x940/0x9f8 [] lock_acquire+0x10c/0x130 [] flush_work+0x4c/0xac [] ks8851_net_stop+0x6c/0x138 [ks8851] [] __dev_close_many+0x98/0xcc [] dev_close_many+0x68/0xd0 [] rollback_registered_many+0xcc/0x2b8 [] rollback_registered+0x28/0x34 [] unregister_netdevice_queue+0x58/0x7c [] unregister_netdev+0x18/0x20 [] ks8851_remove+0x64/0xb4 [ks8851] [] spi_drv_remove+0x18/0x1c [] __device_release_driver+0x7c/0xbc [] driver_detach+0x8c/0xb4 [] bus_remove_driver+0xb8/0xe8 [] sys_delete_module+0x1e8/0x27c [] ret_fast_syscall+0x0/0x3c other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ks->lock); lock((&ks->irq_work)); lock(&ks->lock); lock((&ks->irq_work)); *** DEADLOCK *** 4 locks held by rmmod/125: #0: (&__lockdep_no_validate__){+.+.+.}, at: [] driver_detach+0x6c/0xb4 #1: (&__lockdep_no_validate__){+.+.+.}, at: [] driver_detach+0x78/0xb4 #2: (rtnl_mutex){+.+.+.}, at: [] unregister_netdev+0xc/0x20 #3: (&ks->lock){+.+...}, at: [] ks8851_net_stop+0x64/0x138 [ks8851] Cc: Ben Dooks Signed-off-by: Stephen Boyd Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index e5dc075..ad10759 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -889,16 +889,17 @@ static int ks8851_net_stop(struct net_device *dev) netif_stop_queue(dev); mutex_lock(&ks->lock); + /* turn off the IRQs and ack any outstanding */ + ks8851_wrreg16(ks, KS_IER, 0x0000); + ks8851_wrreg16(ks, KS_ISR, 0xffff); + mutex_unlock(&ks->lock); /* stop any outstanding work */ flush_work(&ks->irq_work); flush_work(&ks->tx_work); flush_work(&ks->rxctrl_work); - /* turn off the IRQs and ack any outstanding */ - ks8851_wrreg16(ks, KS_IER, 0x0000); - ks8851_wrreg16(ks, KS_ISR, 0xffff); - + mutex_lock(&ks->lock); /* shutdown RX process */ ks8851_wrreg16(ks, KS_RXCR1, 0x0000); @@ -907,6 +908,7 @@ static int ks8851_net_stop(struct net_device *dev) /* set powermode to soft power down to save power */ ks8851_set_powermode(ks, PMECR_PM_SOFTDOWN); + mutex_unlock(&ks->lock); /* ensure any queued tx buffers are dumped */ while (!skb_queue_empty(&ks->txq)) { @@ -918,7 +920,6 @@ static int ks8851_net_stop(struct net_device *dev) dev_kfree_skb(txb); } - mutex_unlock(&ks->lock); return 0; } -- cgit v1.1 From 792df87228965c58c307877af00498641584bd47 Mon Sep 17 00:00:00 2001 From: Wenqi Ma Date: Thu, 19 Apr 2012 00:39:37 +0000 Subject: net/hyperv: Adding cancellation to ensure rndis filter is closed Although the network interface is down, the RX packets number which could be observed by ifconfig may keep on increasing. This is because the WORK scheduled in netvsc_set_multicast_list() may be executed after netvsc_close(). That means the rndis filter may be re-enabled by do_set_multicast() even if it was closed by netvsc_close(). By canceling possible WORK before close the rndis filter, the issue could be never happened. Signed-off-by: Wenqi Ma Reviewed-by: Wei Yongjun Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc_drv.c | 38 ++++++++++++++------------------------ 1 file changed, 14 insertions(+), 24 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c index dd29478..2d59138 100644 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -44,6 +44,7 @@ struct net_device_context { /* point back to our device context */ struct hv_device *device_ctx; struct delayed_work dwork; + struct work_struct work; }; @@ -51,30 +52,22 @@ static int ring_size = 128; module_param(ring_size, int, S_IRUGO); MODULE_PARM_DESC(ring_size, "Ring buffer size (# of pages)"); -struct set_multicast_work { - struct work_struct work; - struct net_device *net; -}; - static void do_set_multicast(struct work_struct *w) { - struct set_multicast_work *swk = - container_of(w, struct set_multicast_work, work); - struct net_device *net = swk->net; - - struct net_device_context *ndevctx = netdev_priv(net); + struct net_device_context *ndevctx = + container_of(w, struct net_device_context, work); struct netvsc_device *nvdev; struct rndis_device *rdev; nvdev = hv_get_drvdata(ndevctx->device_ctx); - if (nvdev == NULL) - goto out; + if (nvdev == NULL || nvdev->ndev == NULL) + return; rdev = nvdev->extension; if (rdev == NULL) - goto out; + return; - if (net->flags & IFF_PROMISC) + if (nvdev->ndev->flags & IFF_PROMISC) rndis_filter_set_packet_filter(rdev, NDIS_PACKET_TYPE_PROMISCUOUS); else @@ -82,21 +75,13 @@ static void do_set_multicast(struct work_struct *w) NDIS_PACKET_TYPE_BROADCAST | NDIS_PACKET_TYPE_ALL_MULTICAST | NDIS_PACKET_TYPE_DIRECTED); - -out: - kfree(w); } static void netvsc_set_multicast_list(struct net_device *net) { - struct set_multicast_work *swk = - kmalloc(sizeof(struct set_multicast_work), GFP_ATOMIC); - if (swk == NULL) - return; + struct net_device_context *net_device_ctx = netdev_priv(net); - swk->net = net; - INIT_WORK(&swk->work, do_set_multicast); - schedule_work(&swk->work); + schedule_work(&net_device_ctx->work); } static int netvsc_open(struct net_device *net) @@ -125,6 +110,8 @@ static int netvsc_close(struct net_device *net) netif_tx_disable(net); + /* Make sure netvsc_set_multicast_list doesn't re-enable filter! */ + cancel_work_sync(&net_device_ctx->work); ret = rndis_filter_close(device_obj); if (ret != 0) netdev_err(net, "unable to close device (ret %d).\n", ret); @@ -335,6 +322,7 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu) nvdev->start_remove = true; cancel_delayed_work_sync(&ndevctx->dwork); + cancel_work_sync(&ndevctx->work); netif_tx_disable(ndev); rndis_filter_device_remove(hdev); @@ -403,6 +391,7 @@ static int netvsc_probe(struct hv_device *dev, net_device_ctx->device_ctx = dev; hv_set_drvdata(dev, net); INIT_DELAYED_WORK(&net_device_ctx->dwork, netvsc_send_garp); + INIT_WORK(&net_device_ctx->work, do_set_multicast); net->netdev_ops = &device_ops; @@ -456,6 +445,7 @@ static int netvsc_remove(struct hv_device *dev) ndev_ctx = netdev_priv(net); cancel_delayed_work_sync(&ndev_ctx->dwork); + cancel_work_sync(&ndev_ctx->work); /* Stop outbound asap */ netif_tx_disable(net); -- cgit v1.1 From e8195b24feb208f6e944e7542779f4397776794d Mon Sep 17 00:00:00 2001 From: Matt Renzelmann Date: Thu, 19 Apr 2012 07:17:17 +0000 Subject: ks8851: Fix request_irq/free_irq mismatch The dev_id parameter passed to free_irq needs to match the one passed to the corresponding request_irq. Signed-off-by: Matt Renzelmann Acked-by: Stephen Boyd Signed-off-by: David S. Miller --- drivers/net/ethernet/micrel/ks8851.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c index ad10759..f8dda00 100644 --- a/drivers/net/ethernet/micrel/ks8851.c +++ b/drivers/net/ethernet/micrel/ks8851.c @@ -1525,7 +1525,7 @@ static int __devinit ks8851_probe(struct spi_device *spi) err_netdev: - free_irq(ndev->irq, ndev); + free_irq(ndev->irq, ks); err_id: err_irq: -- cgit v1.1 From 163faf31778e536ac6125bc8b14f4667adc910e9 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 19 Apr 2012 10:36:33 +0000 Subject: drivers/net: Do not free an IRQ if its request failed Refrain from attempting to free an interrupt line if the request fails and hence, there is no IRQ to free. CC: netdev@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 5aa2dbe..cd3defb 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2378,7 +2378,6 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); pdata = netdev_priv(dev); - dev->irq = irq_res->start; irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; pdata->ioaddr = ioremap_nocache(res->start, res_size); @@ -2442,7 +2441,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) if (retval) { SMSC_WARN(pdata, probe, "Unable to claim requested irq: %d", dev->irq); - goto out_free_irq; + goto out_disable_resources; } retval = register_netdev(dev); -- cgit v1.1 From b2bccee1793ebcf47272fc6556e741a9fba896c7 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 20:24:04 +0800 Subject: net: fec: adopt pinctrl support Cc: netdev@vger.kernel.org Signed-off-by: Shawn Guo Acked-by: Dong Aisheng Acked-by: David S. Miller --- drivers/net/ethernet/freescale/fec.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c index a12b3f5..500c106 100644 --- a/drivers/net/ethernet/freescale/fec.c +++ b/drivers/net/ethernet/freescale/fec.c @@ -48,6 +48,7 @@ #include #include #include +#include #include @@ -1542,6 +1543,7 @@ fec_probe(struct platform_device *pdev) struct resource *r; const struct of_device_id *of_id; static int dev_id; + struct pinctrl *pinctrl; of_id = of_match_device(fec_dt_ids, &pdev->dev); if (of_id) @@ -1609,6 +1611,12 @@ fec_probe(struct platform_device *pdev) } } + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) { + ret = PTR_ERR(pinctrl); + goto failed_pin; + } + fep->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(fep->clk)) { ret = PTR_ERR(fep->clk); @@ -1639,6 +1647,7 @@ failed_mii_init: failed_init: clk_disable_unprepare(fep->clk); clk_put(fep->clk); +failed_pin: failed_clk: for (i = 0; i < FEC_IRQ_NUM; i++) { irq = platform_get_irq(pdev, i); -- cgit v1.1 From a53157c21c699c392921e243fa96abc27722f910 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Sun, 6 May 2012 20:25:13 +0800 Subject: can: flexcan: adopt pinctrl support Cc: linux-can@vger.kernel.org Signed-off-by: Shawn Guo Acked-by: Marc Kleine-Budde Acked-by: Dong Aisheng --- drivers/net/can/flexcan.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 1efb083..38c0690 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -35,6 +35,7 @@ #include #include #include +#include #define DRV_NAME "flexcan" @@ -927,11 +928,16 @@ static int __devinit flexcan_probe(struct platform_device *pdev) struct flexcan_priv *priv; struct resource *mem; struct clk *clk = NULL; + struct pinctrl *pinctrl; void __iomem *base; resource_size_t mem_size; int err, irq; u32 clock_freq = 0; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + return PTR_ERR(pinctrl); + if (pdev->dev.of_node) { const u32 *clock_freq_p; -- cgit v1.1