From 3ee59f8d0dcab2e114546038b2b224776c82b7f7 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Thu, 30 Apr 2009 09:58:50 +0200 Subject: iwlwifi: remove EXPORT_SYMBOL for static symbol It does not make sense to apply EXPORT_SYMBOL to a static symbol. Fixes this build error: drivers/net/wireless/iwlwifi/iwl3945-base.c:1697: error: __ksymtab_iwl3945_rx_queue_reset causes a section type conflict Signed-off-by: Andreas Schwab Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 70a00c8..4cce661 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1744,7 +1744,6 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx rxq->bd = NULL; rxq->rb_stts = NULL; } -EXPORT_SYMBOL(iwl3945_rx_queue_free); /* Convert linear signal-to-noise ratio into dB */ -- cgit v1.1 From 299f5462087f3bc2141e6bc83ba7e2b15d8a07d2 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Thu, 30 Apr 2009 13:56:31 -0700 Subject: iwlwifi: update key flags at time key is set We need to be symmetrical in what is done when key is set and cleared. This is important wrt the key flags as they are used during key clearing and if they are not set when the key is set the key cannot be cleared completely. This addresses the many occurences of the WARN found in iwl_set_tkip_dynamic_key_info() and tracked in http://www.kerneloops.org/searchweek.php?search=iwl_set_dynamic_key If calling iwl_set_tkip_dynamic_key_info()/iwl_remove_dynamic_key() pair a few times in a row will cause that we run out of key space. This is because the index stored in the key flags is used by iwl_remove_dynamic_key() to decide if it should remove the key. Unfortunately the key flags, and hence the key index is currently only set at the time the key is written to the device (in iwl_update_tkip_key()) and _not_ in iwl_set_tkip_dynamic_key_info(). Fix this by setting flags in iwl_set_tkip_dynamic_key_info(). Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-sta.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c index 5798fe4..44ab03a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-sta.c +++ b/drivers/net/wireless/iwlwifi/iwl-sta.c @@ -719,6 +719,14 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, { unsigned long flags; int ret = 0; + __le16 key_flags = 0; + + key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); + key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); + key_flags &= ~STA_KEY_FLG_INVALID; + + if (sta_id == priv->hw_params.bcast_sta_id) + key_flags |= STA_KEY_MULTICAST_MSK; keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; @@ -738,6 +746,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv, WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET, "no space for a new key"); + priv->stations[sta_id].sta.key.key_flags = key_flags; + + /* This copy is acutally not needed: we get the key with each TX */ memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16); @@ -754,9 +765,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv, { u8 sta_id = IWL_INVALID_STATION; unsigned long flags; - __le16 key_flags = 0; int i; - DECLARE_MAC_BUF(mac); sta_id = iwl_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { @@ -771,16 +780,8 @@ void iwl_update_tkip_key(struct iwl_priv *priv, return; } - key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK); - key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS); - key_flags &= ~STA_KEY_FLG_INVALID; - - if (sta_id == priv->hw_params.bcast_sta_id) - key_flags |= STA_KEY_MULTICAST_MSK; - spin_lock_irqsave(&priv->sta_lock, flags); - priv->stations[sta_id].sta.key.key_flags = key_flags; priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32; for (i = 0; i < 5; i++) -- cgit v1.1 From 77a22941f9ed052a0fdaa92753b1a1ab8072ee76 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 6 May 2009 16:43:48 -0700 Subject: igb: resolve panic on shutdown when SR-IOV is enabled The setup_rctl call was making a call into the ring structure after it had been freed. This was causing a panic on shutdown. This call wasn't necessary since it is possible to get the needed index from adapter->vfs_allocated_count. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 08c8014..e253435 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -2006,7 +2006,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; u32 rctl; u32 srrctl = 0; - int i, j; + int i; rctl = rd32(E1000_RCTL); @@ -2071,8 +2071,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter) if (adapter->vfs_allocated_count) { u32 vmolr; - j = adapter->rx_ring[0].reg_idx; - /* set all queue drop enable bits */ wr32(E1000_QDE, ALL_QUEUES); srrctl |= E1000_SRRCTL_DROP_EN; @@ -2080,16 +2078,16 @@ static void igb_setup_rctl(struct igb_adapter *adapter) /* disable queue 0 to prevent tail write w/o re-config */ wr32(E1000_RXDCTL(0), 0); - vmolr = rd32(E1000_VMOLR(j)); + vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count)); if (rctl & E1000_RCTL_LPE) vmolr |= E1000_VMOLR_LPE; - if (adapter->num_rx_queues > 0) + if (adapter->num_rx_queues > 1) vmolr |= E1000_VMOLR_RSSE; - wr32(E1000_VMOLR(j), vmolr); + wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr); } for (i = 0; i < adapter->num_rx_queues; i++) { - j = adapter->rx_ring[i].reg_idx; + int j = adapter->rx_ring[i].reg_idx; wr32(E1000_SRRCTL(j), srrctl); } -- cgit v1.1 From 581daf7e00c5e766f26aff80a61a860a17b0d75a Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 6 May 2009 16:46:47 -0700 Subject: bnx2: Fix panic in bnx2_poll_work(). Add barrier() to bnx2_get_hw_{tx|rx}_cons() to fix this issue: http://bugzilla.kernel.org/show_bug.cgi?id=12698 This issue was reported by multiple i386 users. Without barrier(), the compiled code looks like the following where %eax contains the address of the tx_cons or rx_cons in the DMA status block. The status block contents can change between the cmpb and the movzwl instruction. The driver would crash if the value was not 0xff during the cmpb instruction, but changed to 0xff during the movzwl instruction. 6828: 80 38 ff cmpb $0xff,(%eax) 682b: 0f b7 10 movzwl (%eax),%edx With the added barrier(), the compiled code now looks correct: 683d: 0f b7 10 movzwl (%eax),%edx 6840: 0f b6 c2 movzbl %dl,%eax 6843: 3d ff 00 00 00 cmp $0xff,%eax Thanks to Pascal de Bruijn for reporting the problem and Holger Noefer for patiently testing test patches for us. Also updated version to 2.0.1. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index d478391..b0cb29d 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -54,8 +54,8 @@ #define DRV_MODULE_NAME "bnx2" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "2.0.0" -#define DRV_MODULE_RELDATE "April 2, 2009" +#define DRV_MODULE_VERSION "2.0.1" +#define DRV_MODULE_RELDATE "May 6, 2009" #define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-4.6.16.fw" #define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-4.6.16.fw" #define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-4.6.17.fw" @@ -2600,6 +2600,7 @@ bnx2_get_hw_tx_cons(struct bnx2_napi *bnapi) /* Tell compiler that status block fields can change. */ barrier(); cons = *bnapi->hw_tx_cons_ptr; + barrier(); if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT)) cons++; return cons; @@ -2879,6 +2880,7 @@ bnx2_get_hw_rx_cons(struct bnx2_napi *bnapi) /* Tell compiler that status block fields can change. */ barrier(); cons = *bnapi->hw_rx_cons_ptr; + barrier(); if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT)) cons++; return cons; -- cgit v1.1 From 3ba8c7920552865a338e00512715786b54db4da0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 28 Apr 2009 14:54:07 +0200 Subject: IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization. ENOSYS makes modutils complain about missing kernel module support. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/arm/ixp4xx_eth.c | 6 +++--- drivers/net/wan/ixp4xx_hss.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 448487e..721b542 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -338,12 +338,12 @@ static int ixp4xx_mdio_register(void) if (cpu_is_ixp43x()) { /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH)) - return -ENOSYS; + return -ENODEV; mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT; } else { /* All MII PHY accesses use NPE-B Ethernet registers */ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) - return -ENOSYS; + return -ENODEV; mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; } @@ -1174,7 +1174,7 @@ static int __devinit eth_init_one(struct platform_device *pdev) regs_phys = IXP4XX_EthC_BASE_PHYS; break; default: - err = -ENOSYS; + err = -ENODEV; goto err_free; } diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 3bf7d3f..765a7f5 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -1249,7 +1249,7 @@ static int __devinit hss_init_one(struct platform_device *pdev) return -ENOMEM; if ((port->npe = npe_request(0)) == NULL) { - err = -ENOSYS; + err = -ENODEV; goto err_free; } @@ -1311,7 +1311,7 @@ static int __init hss_init_module(void) if ((ixp4xx_read_feature_bits() & (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) != (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) - return -ENOSYS; + return -ENODEV; spin_lock_init(&npe_lock); -- cgit v1.1 From 7aa6a4786e70fe826b998d1f95ba911a28546844 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Mon, 4 May 2009 21:31:52 +0200 Subject: IXP4xx: complete Ethernet netdev setup before calling register_netdev(). MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa --- drivers/net/arm/ixp4xx_eth.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 721b542..a740053 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c @@ -1189,15 +1189,10 @@ static int __devinit eth_init_one(struct platform_device *pdev) goto err_free; } - if (register_netdev(dev)) { - err = -EIO; - goto err_npe_rel; - } - port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name); if (!port->mem_res) { err = -EBUSY; - goto err_unreg; + goto err_npe_rel; } port->plat = plat; @@ -1215,20 +1210,25 @@ static int __devinit eth_init_one(struct platform_device *pdev) snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy); port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0, PHY_INTERFACE_MODE_MII); - if (IS_ERR(port->phydev)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(port->phydev); - } + if ((err = IS_ERR(port->phydev))) + goto err_free_mem; port->phydev->irq = PHY_POLL; + if ((err = register_netdev(dev))) + goto err_phy_dis; + printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy, npe_name(port->npe)); return 0; -err_unreg: - unregister_netdev(dev); +err_phy_dis: + phy_disconnect(port->phydev); +err_free_mem: + npe_port_tab[NPE_ID(port->id)] = NULL; + platform_set_drvdata(pdev, NULL); + release_resource(port->mem_res); err_npe_rel: npe_release(port->npe); err_free: @@ -1242,6 +1242,7 @@ static int __devexit eth_remove_one(struct platform_device *pdev) struct port *port = netdev_priv(dev); unregister_netdev(dev); + phy_disconnect(port->phydev); npe_port_tab[NPE_ID(port->id)] = NULL; platform_set_drvdata(pdev, NULL); npe_release(port->npe); -- cgit v1.1 From 9d34d1a20e8171be819a6c8c4de4eea6104d174e Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 8 May 2009 11:49:11 +0000 Subject: bonding: fix panic if initialization fails If module initialisation failed (e.g. because the bonding sysfs entry cannot be created), kernel panics: IP: [] destroy_workqueue+0x2d/0x146 Call Trace: [] bond_destructor+0x28/0x78 [] netdev_run_todo+0x231/0x25a [] rtnl_unlock+0x9/0xb [] bonding_init+0x83e/0x84a Remove the calls to bond_work_cancel_all() and destroy_workqueue(); both are also called/scheduled via bond_free_all(). bond_destroy_sysfs is unecessary because the sysfs entry has not been created in the error case. Signed-off-by: Florian Westphal Signed-off-by: Jay Vosburgh Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 2188a96..7482402 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -5181,7 +5181,6 @@ static int __init bonding_init(void) { int i; int res; - struct bonding *bond; printk(KERN_INFO "%s", version); @@ -5212,13 +5211,6 @@ static int __init bonding_init(void) goto out; err: - list_for_each_entry(bond, &bond_dev_list, bond_list) { - bond_work_cancel_all(bond); - destroy_workqueue(bond->wq); - } - - bond_destroy_sysfs(); - rtnl_lock(); bond_free_all(); rtnl_unlock(); -- cgit v1.1