From f6603ff2b7a8e02b748dd1acf00fcde78eb5dbcb Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 12 Jan 2015 12:30:02 +0200
Subject: ath10k: Fix DMA burst size

A value of zero indicates that 128B is the maximum
DMA request size for read/writes. But PCI cards based
on AR9880 can support 256B, so enable this for
the 10.2 firmware.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/hw.h  | 3 +++
 drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 5729901..7b771ae 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -183,6 +183,9 @@ struct ath10k_pktlog_hdr {
 #define TARGET_10X_NUM_MSDU_DESC		(1024 + 400)
 #define TARGET_10X_MAX_FRAG_ENTRIES		0
 
+/* 10.2 parameters */
+#define TARGET_10_2_DMA_BURST_SIZE		1
+
 /* Target specific defines for WMI-TLV firmware */
 #define TARGET_TLV_NUM_VDEVS			3
 #define TARGET_TLV_NUM_STATIONS			32
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index ac74290..b103122 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3744,7 +3744,7 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
 	config.mcast2ucast_mode = __cpu_to_le32(TARGET_10X_MCAST2UCAST_MODE);
 	config.tx_dbg_log_size = __cpu_to_le32(TARGET_10X_TX_DBG_LOG_SIZE);
 	config.num_wds_entries = __cpu_to_le32(TARGET_10X_NUM_WDS_ENTRIES);
-	config.dma_burst_size = __cpu_to_le32(TARGET_10X_DMA_BURST_SIZE);
+	config.dma_burst_size = __cpu_to_le32(TARGET_10_2_DMA_BURST_SIZE);
 	config.mac_aggr_delim = __cpu_to_le32(TARGET_10X_MAC_AGGR_DELIM);
 
 	val = TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;
-- 
cgit v1.1


From b6c8e287f6089559146e2a388a63fbe5460d7f44 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 12 Jan 2015 12:30:02 +0200
Subject: ath10k: Enable RX batching

This feature allows the FW to batch RX indications,
reducing the rate of host interrupt generation, which
in turn reduces CPU load. Currently, this is enabled
only for the 10.2 firmware.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index b103122..c56d2fa 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3710,7 +3710,7 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
 	struct wmi_init_cmd_10_2 *cmd;
 	struct sk_buff *buf;
 	struct wmi_resource_config_10x config = {};
-	u32 len, val;
+	u32 len, val, features;
 
 	config.num_vdevs = __cpu_to_le32(TARGET_10X_NUM_VDEVS);
 	config.num_peers = __cpu_to_le32(TARGET_10X_NUM_PEERS);
@@ -3764,6 +3764,9 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar)
 
 	cmd = (struct wmi_init_cmd_10_2 *)buf->data;
 
+	features = WMI_10_2_RX_BATCH_MODE;
+	cmd->resource_config.feature_mask = __cpu_to_le32(features);
+
 	memcpy(&cmd->resource_config.common, &config, sizeof(config));
 	ath10k_wmi_put_host_mem_chunks(ar, &cmd->mem_chunks);
 
-- 
cgit v1.1


From dc8ab27861b2c1277bd9603a85f317708149d844 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 12 Jan 2015 14:07:25 +0200
Subject: ath10k: add wmi support for addba_clear_resp

Add WMI support for clearing addba response before switching aggregation
mode (auto/manual) for debugging purpose.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 18 ++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  1 +
 drivers/net/wireless/ath/ath10k/wmi.c     | 28 ++++++++++++++++++++++++++++
 3 files changed, 47 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 20e2c30..b161043 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -119,6 +119,8 @@ struct wmi_ops {
 						   u32 next_offset,
 						   u32 enabled);
 	struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar);
+	struct sk_buff *(*gen_addba_clear_resp)(struct ath10k *ar, u32 vdev_id,
+						const u8 *mac);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -857,4 +859,20 @@ ath10k_wmi_pdev_get_temperature(struct ath10k *ar)
 				   ar->wmi.cmd->pdev_get_temperature_cmdid);
 }
 
+static inline int
+ath10k_wmi_addba_clear_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_addba_clear_resp)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_addba_clear_resp(ar, vdev_id, mac);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   ar->wmi.cmd->addba_clear_resp_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 4c050ce..499a779 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2207,6 +2207,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
 	/* .gen_pdev_set_quiet_mode not implemented */
 	/* .gen_pdev_get_temperature not implemented */
+	/* .gen_addba_clear_resp not implemented */
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index c56d2fa..47ef1a9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4880,6 +4880,30 @@ ath10k_wmi_op_gen_pdev_set_quiet_mode(struct ath10k *ar, u32 period,
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_clear_resp(struct ath10k *ar, u32 vdev_id,
+				   const u8 *mac)
+{
+	struct wmi_addba_clear_resp_cmd *cmd;
+	struct sk_buff *skb;
+
+	if (!mac)
+		return ERR_PTR(-EINVAL);
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	cmd = (struct wmi_addba_clear_resp_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	ether_addr_copy(cmd->peer_macaddr.addr, mac);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi addba clear resp vdev_id 0x%X mac_addr %pM\n",
+		   vdev_id, mac);
+	return skb;
+}
+
 static const struct wmi_ops wmi_ops = {
 	.rx = ath10k_wmi_op_rx,
 	.map_svc = wmi_main_svc_map,
@@ -4931,6 +4955,7 @@ static const struct wmi_ops wmi_ops = {
 	.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
 	/* .gen_pdev_get_temperature not implemented */
+	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 };
 
 static const struct wmi_ops wmi_10_1_ops = {
@@ -4985,6 +5010,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
 	.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 };
 
 static const struct wmi_ops wmi_10_2_ops = {
@@ -5040,6 +5066,7 @@ static const struct wmi_ops wmi_10_2_ops = {
 	.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
 	.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 };
 
 static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5095,6 +5122,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable,
 	.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
+	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
-- 
cgit v1.1


From 65c0893d91b33018e8eaacc6aeb777c5faf6a094 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 12 Jan 2015 14:07:26 +0200
Subject: ath10k: add wmi support for addba_send

Add WMI support for sending addba request. This command is meant
for debugging purpose.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 19 +++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  1 +
 drivers/net/wireless/ath/ath10k/wmi.c     | 30 ++++++++++++++++++++++++++++++
 3 files changed, 50 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index b161043..badf422 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -121,6 +121,8 @@ struct wmi_ops {
 	struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar);
 	struct sk_buff *(*gen_addba_clear_resp)(struct ath10k *ar, u32 vdev_id,
 						const u8 *mac);
+	struct sk_buff *(*gen_addba_send)(struct ath10k *ar, u32 vdev_id,
+					  const u8 *mac, u32 tid, u32 buf_size);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -875,4 +877,21 @@ ath10k_wmi_addba_clear_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac)
 				   ar->wmi.cmd->addba_clear_resp_cmdid);
 }
 
+static inline int
+ath10k_wmi_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+		      u32 tid, u32 buf_size)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_addba_send)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_addba_send(ar, vdev_id, mac, tid, buf_size);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   ar->wmi.cmd->addba_send_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 499a779..74a0598 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2208,6 +2208,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	/* .gen_pdev_set_quiet_mode not implemented */
 	/* .gen_pdev_get_temperature not implemented */
 	/* .gen_addba_clear_resp not implemented */
+	/* .gen_addba_send not implemented */
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 47ef1a9..980d6ee 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4904,6 +4904,32 @@ ath10k_wmi_op_gen_addba_clear_resp(struct ath10k *ar, u32 vdev_id,
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+			     u32 tid, u32 buf_size)
+{
+	struct wmi_addba_send_cmd *cmd;
+	struct sk_buff *skb;
+
+	if (!mac)
+		return ERR_PTR(-EINVAL);
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	cmd = (struct wmi_addba_send_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	ether_addr_copy(cmd->peer_macaddr.addr, mac);
+	cmd->tid = __cpu_to_le32(tid);
+	cmd->buffersize = __cpu_to_le32(buf_size);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi addba send vdev_id 0x%X mac_addr %pM tid %u bufsize %u\n",
+		   vdev_id, mac, tid, buf_size);
+	return skb;
+}
+
 static const struct wmi_ops wmi_ops = {
 	.rx = ath10k_wmi_op_rx,
 	.map_svc = wmi_main_svc_map,
@@ -4956,6 +4982,7 @@ static const struct wmi_ops wmi_ops = {
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
 	/* .gen_pdev_get_temperature not implemented */
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 };
 
 static const struct wmi_ops wmi_10_1_ops = {
@@ -5011,6 +5038,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 };
 
 static const struct wmi_ops wmi_10_2_ops = {
@@ -5067,6 +5095,7 @@ static const struct wmi_ops wmi_10_2_ops = {
 	.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 };
 
 static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5123,6 +5152,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable,
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
+	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
-- 
cgit v1.1


From 11597413b22d1a2ee02501d4167ae712a2b7929e Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 12 Jan 2015 14:07:26 +0200
Subject: ath10k: add wmi support for addba_set_resp

Add WMI support for sending addba response manually. This command
is used for debugging purpose.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 20 ++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  1 +
 drivers/net/wireless/ath/ath10k/wmi.c     | 30 ++++++++++++++++++++++++++++++
 3 files changed, 51 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index badf422..e8f49de 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -123,6 +123,9 @@ struct wmi_ops {
 						const u8 *mac);
 	struct sk_buff *(*gen_addba_send)(struct ath10k *ar, u32 vdev_id,
 					  const u8 *mac, u32 tid, u32 buf_size);
+	struct sk_buff *(*gen_addba_set_resp)(struct ath10k *ar, u32 vdev_id,
+					      const u8 *mac, u32 tid,
+					      u32 status);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -894,4 +897,21 @@ ath10k_wmi_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
 				   ar->wmi.cmd->addba_send_cmdid);
 }
 
+static inline int
+ath10k_wmi_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+			  u32 tid, u32 status)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_addba_set_resp)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_addba_set_resp(ar, vdev_id, mac, tid, status);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   ar->wmi.cmd->addba_set_resp_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 74a0598..63f9860 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2209,6 +2209,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	/* .gen_pdev_get_temperature not implemented */
 	/* .gen_addba_clear_resp not implemented */
 	/* .gen_addba_send not implemented */
+	/* .gen_addba_set_resp not implemented */
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 980d6ee..9872181 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4930,6 +4930,32 @@ ath10k_wmi_op_gen_addba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_op_gen_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+				 u32 tid, u32 status)
+{
+	struct wmi_addba_setresponse_cmd *cmd;
+	struct sk_buff *skb;
+
+	if (!mac)
+		return ERR_PTR(-EINVAL);
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	cmd = (struct wmi_addba_setresponse_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	ether_addr_copy(cmd->peer_macaddr.addr, mac);
+	cmd->tid = __cpu_to_le32(tid);
+	cmd->statuscode = __cpu_to_le32(status);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi addba set resp vdev_id 0x%X mac_addr %pM tid %u status %u\n",
+		   vdev_id, mac, tid, status);
+	return skb;
+}
+
 static const struct wmi_ops wmi_ops = {
 	.rx = ath10k_wmi_op_rx,
 	.map_svc = wmi_main_svc_map,
@@ -4983,6 +5009,7 @@ static const struct wmi_ops wmi_ops = {
 	/* .gen_pdev_get_temperature not implemented */
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 };
 
 static const struct wmi_ops wmi_10_1_ops = {
@@ -5039,6 +5066,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 };
 
 static const struct wmi_ops wmi_10_2_ops = {
@@ -5096,6 +5124,7 @@ static const struct wmi_ops wmi_10_2_ops = {
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 };
 
 static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5153,6 +5182,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode,
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
+	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
-- 
cgit v1.1


From 50abef85e7cc7576b37ba8dbe480f0537fe74d6d Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 12 Jan 2015 14:07:26 +0200
Subject: ath10k: add wmi support for delba_send

Add WMI support for sending delba request. This command is used for
debugging purpose.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 21 +++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  1 +
 drivers/net/wireless/ath/ath10k/wmi.c     | 31 +++++++++++++++++++++++++++++++
 3 files changed, 53 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index e8f49de..3a3d15e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -126,6 +126,9 @@ struct wmi_ops {
 	struct sk_buff *(*gen_addba_set_resp)(struct ath10k *ar, u32 vdev_id,
 					      const u8 *mac, u32 tid,
 					      u32 status);
+	struct sk_buff *(*gen_delba_send)(struct ath10k *ar, u32 vdev_id,
+					  const u8 *mac, u32 tid, u32 initiator,
+					  u32 reason);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -914,4 +917,22 @@ ath10k_wmi_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
 				   ar->wmi.cmd->addba_set_resp_cmdid);
 }
 
+static inline int
+ath10k_wmi_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+		      u32 tid, u32 initiator, u32 reason)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_delba_send)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_delba_send(ar, vdev_id, mac, tid, initiator,
+					  reason);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb,
+				   ar->wmi.cmd->delba_send_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 63f9860..57d2b50 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2210,6 +2210,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	/* .gen_addba_clear_resp not implemented */
 	/* .gen_addba_send not implemented */
 	/* .gen_addba_set_resp not implemented */
+	/* .gen_delba_send not implemented */
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 9872181..2d3c700 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4956,6 +4956,33 @@ ath10k_wmi_op_gen_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac,
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_op_gen_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
+			     u32 tid, u32 initiator, u32 reason)
+{
+	struct wmi_delba_send_cmd *cmd;
+	struct sk_buff *skb;
+
+	if (!mac)
+		return ERR_PTR(-EINVAL);
+
+	skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	cmd = (struct wmi_delba_send_cmd *)skb->data;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	ether_addr_copy(cmd->peer_macaddr.addr, mac);
+	cmd->tid = __cpu_to_le32(tid);
+	cmd->initiator = __cpu_to_le32(initiator);
+	cmd->reasoncode = __cpu_to_le32(reason);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi delba send vdev_id 0x%X mac_addr %pM tid %u initiator %u reason %u\n",
+		   vdev_id, mac, tid, initiator, reason);
+	return skb;
+}
+
 static const struct wmi_ops wmi_ops = {
 	.rx = ath10k_wmi_op_rx,
 	.map_svc = wmi_main_svc_map,
@@ -5010,6 +5037,7 @@ static const struct wmi_ops wmi_ops = {
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 };
 
 static const struct wmi_ops wmi_10_1_ops = {
@@ -5067,6 +5095,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 };
 
 static const struct wmi_ops wmi_10_2_ops = {
@@ -5125,6 +5154,7 @@ static const struct wmi_ops wmi_10_2_ops = {
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 };
 
 static const struct wmi_ops wmi_10_2_4_ops = {
@@ -5183,6 +5213,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp,
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
+	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
-- 
cgit v1.1


From f5045988b937e4801e3185f9d95c34a7c050b681 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 12 Jan 2015 14:07:27 +0200
Subject: ath10k: Implement sta_add_debugfs

Add per station debugfs files when a station is added to mac80211's
station list. This helps to group peer specific debugfs entries
altogether. Right now this callback adds support to test aggregation
procedures (addba/addba_resp/delba) manually.

To enable automatic aggregation in target,
echo 0 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
	stations/XX:XX:XX:XX:XX:XX/aggr_mode

For manual mode,
echo 1 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
	stations/XX:XX:XX:XX:XX:XX/aggr_mode

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/Makefile      |  1 +
 drivers/net/wireless/ath/ath10k/core.h        |  5 ++
 drivers/net/wireless/ath/ath10k/debug.h       | 11 +++-
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 88 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/mac.c         |  3 +
 5 files changed, 107 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/ath/ath10k/debugfs_sta.c

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index ffa3b1a..6c0c23e 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -15,6 +15,7 @@ ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
 ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
 ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
 ath10k_core-$(CONFIG_THERMAL) += thermal.o
+ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
 
 obj-$(CONFIG_ATH10K_PCI) += ath10k_pci.o
 ath10k_pci-y += pci.o \
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 7b6d9e4..c568612 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -239,6 +239,11 @@ struct ath10k_sta {
 	u32 smps;
 
 	struct work_struct update_wk;
+
+#ifdef CONFIG_MAC80211_DEBUGFS
+	/* protected by conf_mutex */
+	bool aggr_mode;
+#endif
 };
 
 #define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 1b87a5d..a12b832 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -48,6 +48,12 @@ enum ath10k_pktlog_filter {
 	ATH10K_PKTLOG_ANY        = 0x00000001f,
 };
 
+enum ath10k_dbg_aggr_mode {
+	ATH10K_DBG_AGGR_MODE_AUTO,
+	ATH10K_DBG_AGGR_MODE_MANUAL,
+	ATH10K_DBG_AGGR_MODE_MAX,
+};
+
 extern unsigned int ath10k_debug_mask;
 
 __printf(2, 3) void ath10k_info(struct ath10k *ar, const char *fmt, ...);
@@ -77,7 +83,6 @@ int ath10k_debug_get_et_sset_count(struct ieee80211_hw *hw,
 void ath10k_debug_get_et_stats(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif,
 			       struct ethtool_stats *stats, u64 *data);
-
 #else
 static inline int ath10k_debug_start(struct ath10k *ar)
 {
@@ -129,6 +134,10 @@ ath10k_debug_get_new_fw_crash_data(struct ath10k *ar)
 #define ath10k_debug_get_et_stats NULL
 
 #endif /* CONFIG_ATH10K_DEBUGFS */
+#ifdef CONFIG_MAC80211_DEBUGFS
+void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta, struct dentry *dir);
+#endif /* CONFIG_MAC80211_DEBUGFS */
 
 #ifdef CONFIG_ATH10K_DEBUG
 __printf(3, 4) void ath10k_dbg(struct ath10k *ar,
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
new file mode 100644
index 0000000..5df9673
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "core.h"
+#include "wmi-ops.h"
+#include "debug.h"
+
+static ssize_t ath10k_dbg_sta_read_aggr_mode(struct file *file,
+					     char __user *user_buf,
+					     size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	struct ath10k *ar = arsta->arvif->ar;
+	char buf[32];
+	int len = 0;
+
+	mutex_lock(&ar->conf_mutex);
+	len = scnprintf(buf, sizeof(buf) - len, "aggregation mode: %s\n",
+			(arsta->aggr_mode == ATH10K_DBG_AGGR_MODE_AUTO) ?
+			"auto" : "manual");
+	mutex_unlock(&ar->conf_mutex);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath10k_dbg_sta_write_aggr_mode(struct file *file,
+					      const char __user *user_buf,
+					      size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	struct ath10k *ar = arsta->arvif->ar;
+	u32 aggr_mode;
+	int ret;
+
+	if (kstrtouint_from_user(user_buf, count, 0, &aggr_mode))
+		return -EINVAL;
+
+	if (aggr_mode >= ATH10K_DBG_AGGR_MODE_MAX)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+	if ((ar->state != ATH10K_STATE_ON) ||
+	    (aggr_mode == arsta->aggr_mode)) {
+		ret = count;
+		goto out;
+	}
+
+	ret = ath10k_wmi_addba_clear_resp(ar, arsta->arvif->vdev_id, sta->addr);
+	if (ret) {
+		ath10k_warn(ar, "failed to clear addba session ret: %d\n", ret);
+		goto out;
+	}
+
+	arsta->aggr_mode = aggr_mode;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static const struct file_operations fops_aggr_mode = {
+	.read = ath10k_dbg_sta_read_aggr_mode,
+	.write = ath10k_dbg_sta_write_aggr_mode,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			    struct ieee80211_sta *sta, struct dentry *dir)
+{
+	debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
+			    &fops_aggr_mode);
+}
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5085f55..c7febfc 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4746,6 +4746,9 @@ static const struct ieee80211_ops ath10k_ops = {
 	.suspend			= ath10k_suspend,
 	.resume				= ath10k_resume,
 #endif
+#ifdef CONFIG_MAC80211_DEBUGFS
+	.sta_add_debugfs		= ath10k_sta_add_debugfs,
+#endif
 };
 
 #define RATETAB_ENT(_rate, _rateid, _flags) { \
-- 
cgit v1.1


From 8bf8f190febcd2b4544d5fa13ed0809e2e92f53b Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 12 Jan 2015 14:07:27 +0200
Subject: ath10k: add support to send addba request

This per-station debugfs entry helps to send addba request in manual
mode. Need to pass two configuration parameters (tid, buffer size)
as input.

To send addba,

echo 1 32 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
	   stations/XX:XX:XX:XX:XX:XX/addba

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 52 +++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 5df9673..23d81a2 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -80,9 +80,61 @@ static const struct file_operations fops_aggr_mode = {
 	.llseek = default_llseek,
 };
 
+static ssize_t ath10k_dbg_sta_write_addba(struct file *file,
+					  const char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	struct ath10k *ar = arsta->arvif->ar;
+	u32 tid, buf_size;
+	int ret;
+	char buf[64];
+
+	simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+	/* make sure that buf is null terminated */
+	buf[sizeof(buf) - 1] = '\0';
+
+	ret = sscanf(buf, "%u %u", &tid, &buf_size);
+	if (ret != 2)
+		return -EINVAL;
+
+	/* Valid TID values are 0 through 15 */
+	if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+	if ((ar->state != ATH10K_STATE_ON) ||
+	    (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+		ret = count;
+		goto out;
+	}
+
+	ret = ath10k_wmi_addba_send(ar, arsta->arvif->vdev_id, sta->addr,
+				    tid, buf_size);
+	if (ret) {
+		ath10k_warn(ar, "failed to send addba request: vdev_id %u peer %pM tid %u buf_size %u\n",
+			    arsta->arvif->vdev_id, sta->addr, tid, buf_size);
+	}
+
+	ret = count;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static const struct file_operations fops_addba = {
+	.write = ath10k_dbg_sta_write_addba,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta, struct dentry *dir)
 {
 	debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
 			    &fops_aggr_mode);
+	debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
 }
-- 
cgit v1.1


From 8e68d55f5e4a0444a569ecf605f482b9af0b9264 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 12 Jan 2015 14:07:27 +0200
Subject: ath10k: add support to send addba response

This per-station debugfs entry helps to send addba response in
manual mode for debugging purpose. It accepts tid and status code
as input arguments.

To send addba response,

echo 0 25 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
	   stations/XX:XX:XX:XX:XX:XX/addba_resp

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 51 +++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 23d81a2..31a72d4 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -131,10 +131,61 @@ static const struct file_operations fops_addba = {
 	.llseek = default_llseek,
 };
 
+static ssize_t ath10k_dbg_sta_write_addba_resp(struct file *file,
+					       const char __user *user_buf,
+					       size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	struct ath10k *ar = arsta->arvif->ar;
+	u32 tid, status;
+	int ret;
+	char buf[64];
+
+	simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+	/* make sure that buf is null terminated */
+	buf[sizeof(buf) - 1] = '\0';
+
+	ret = sscanf(buf, "%u %u", &tid, &status);
+	if (ret != 2)
+		return -EINVAL;
+
+	/* Valid TID values are 0 through 15 */
+	if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+	if ((ar->state != ATH10K_STATE_ON) ||
+	    (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+		ret = count;
+		goto out;
+	}
+
+	ret = ath10k_wmi_addba_set_resp(ar, arsta->arvif->vdev_id, sta->addr,
+					tid, status);
+	if (ret) {
+		ath10k_warn(ar, "failed to send addba response: vdev_id %u peer %pM tid %u status%u\n",
+			    arsta->arvif->vdev_id, sta->addr, tid, status);
+	}
+	ret = count;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static const struct file_operations fops_addba_resp = {
+	.write = ath10k_dbg_sta_write_addba_resp,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta, struct dentry *dir)
 {
 	debugfs_create_file("aggr_mode", S_IRUGO | S_IWUSR, dir, sta,
 			    &fops_aggr_mode);
 	debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
+	debugfs_create_file("addba_resp", S_IWUSR, dir, sta, &fops_addba_resp);
 }
-- 
cgit v1.1


From da2aedcadbe2e03db78b30adccbdba77e25f406b Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 12 Jan 2015 14:07:28 +0200
Subject: ath10k: add support to send delba

This per-station debugfs entry helps to send delba in manual mode
for debugging purpose. It accepts tid, initiator and reason code
as inputs.

To send delba,

echo 0 1 37 >/sys/kernel/debug/ieee80211/phyX/netdev:wlanX/
	     stations/XX:XX:XX:XX:XX:XX/delba

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debugfs_sta.c | 52 +++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index 31a72d4..95b5c49 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -181,6 +181,57 @@ static const struct file_operations fops_addba_resp = {
 	.llseek = default_llseek,
 };
 
+static ssize_t ath10k_dbg_sta_write_delba(struct file *file,
+					  const char __user *user_buf,
+					  size_t count, loff_t *ppos)
+{
+	struct ieee80211_sta *sta = file->private_data;
+	struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+	struct ath10k *ar = arsta->arvif->ar;
+	u32 tid, initiator, reason;
+	int ret;
+	char buf[64];
+
+	simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+	/* make sure that buf is null terminated */
+	buf[sizeof(buf) - 1] = '\0';
+
+	ret = sscanf(buf, "%u %u %u", &tid, &initiator, &reason);
+	if (ret != 3)
+		return -EINVAL;
+
+	/* Valid TID values are 0 through 15 */
+	if (tid > HTT_DATA_TX_EXT_TID_MGMT - 2)
+		return -EINVAL;
+
+	mutex_lock(&ar->conf_mutex);
+	if ((ar->state != ATH10K_STATE_ON) ||
+	    (arsta->aggr_mode != ATH10K_DBG_AGGR_MODE_MANUAL)) {
+		ret = count;
+		goto out;
+	}
+
+	ret = ath10k_wmi_delba_send(ar, arsta->arvif->vdev_id, sta->addr,
+				    tid, initiator, reason);
+	if (ret) {
+		ath10k_warn(ar, "failed to send delba: vdev_id %u peer %pM tid %u initiator %u reason %u\n",
+			    arsta->arvif->vdev_id, sta->addr, tid, initiator,
+			    reason);
+	}
+	ret = count;
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static const struct file_operations fops_delba = {
+	.write = ath10k_dbg_sta_write_delba,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    struct ieee80211_sta *sta, struct dentry *dir)
 {
@@ -188,4 +239,5 @@ void ath10k_sta_add_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    &fops_aggr_mode);
 	debugfs_create_file("addba", S_IWUSR, dir, sta, &fops_addba);
 	debugfs_create_file("addba_resp", S_IWUSR, dir, sta, &fops_addba_resp);
+	debugfs_create_file("delba", S_IWUSR, dir, sta, &fops_delba);
 }
-- 
cgit v1.1


From 8be3b69259ce2b9efc9a822ff3bf48a42460f133 Mon Sep 17 00:00:00 2001
From: Julia Lawall <Julia.Lawall@lip6.fr>
Date: Mon, 29 Dec 2014 18:04:43 +0100
Subject: ath10k: fix error return code

Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index a1bda41..5c64139 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -475,8 +475,10 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 
 	skb_cb->htt.txbuf = dma_pool_alloc(htt->tx_pool, GFP_ATOMIC,
 					   &paddr);
-	if (!skb_cb->htt.txbuf)
+	if (!skb_cb->htt.txbuf) {
+		res = -ENOMEM;
 		goto err_free_msdu_id;
+	}
 	skb_cb->htt.txbuf_paddr = paddr;
 
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
-- 
cgit v1.1


From c3ebfede463ca071ae42d5b5aa3b6cb89c592951 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 5 Jan 2015 10:10:22 +0530
Subject: ath10k: Remove unused htt->max_throughput_mbps

htt->max_throughput_mbps is not used anywhere.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt.c | 1 -
 drivers/net/wireless/ath/ath10k/htt.h | 1 -
 2 files changed, 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
index 56cb4ac..ceec764 100644
--- a/drivers/net/wireless/ath/ath10k/htt.c
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -53,7 +53,6 @@ int ath10k_htt_init(struct ath10k *ar)
 	struct ath10k_htt *htt = &ar->htt;
 
 	htt->ar = ar;
-	htt->max_throughput_mbps = 800;
 
 	/*
 	 * Prefetch enough data to satisfy target
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 1bd5545..8809b37 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -1182,7 +1182,6 @@ struct ath10k_htt {
 	struct ath10k *ar;
 	enum ath10k_htc_ep_id eid;
 
-	int max_throughput_mbps;
 	u8 target_version_major;
 	u8 target_version_minor;
 	struct completion target_version_received;
-- 
cgit v1.1


From 49274332a43a70b3a3f40ba6db14d9c0677e8e02 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 8 Jan 2015 11:36:56 +0100
Subject: ath10k: fill max_num_vdevs for wmi-tlv

Recent commit
30c78167bc6536d9074aa79385a575596343bf69 ("ath10k:
set max_num_vdevs based on wmi op version")
skipped wmi-tlv case and left max_num_vdevs reset.
Make sure it is properly set.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 2d0671e..a546575 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -927,6 +927,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
 	case ATH10K_FW_WMI_OP_VERSION_TLV:
 		ar->max_num_peers = TARGET_TLV_NUM_PEERS;
 		ar->max_num_stations = TARGET_TLV_NUM_STATIONS;
+		ar->max_num_vdevs = TARGET_TLV_NUM_VDEVS;
 		ar->htt.max_num_pending_tx = TARGET_TLV_NUM_MSDU_DESC;
 		break;
 	case ATH10K_FW_WMI_OP_VERSION_UNSET:
-- 
cgit v1.1


From 38e2a644174e74f948ec4415ae5b5c76f1412b0e Mon Sep 17 00:00:00 2001
From: Nicholas Mc Guire <der.herr@hofr.at>
Date: Thu, 8 Jan 2015 13:27:34 +0100
Subject: ath10k: fixup wait_for_completion_timeout return handling

wait_for_completion_timeout does not return negative values so the tests
for <= 0 are not needed and the case differentiation in the error handling
path unnecessary.

Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/debug.c | 2 +-
 drivers/net/wireless/ath/ath10k/htc.c   | 6 ++----
 drivers/net/wireless/ath/ath10k/htt.c   | 2 +-
 drivers/net/wireless/ath/ath10k/mac.c   | 2 +-
 4 files changed, 5 insertions(+), 7 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 6ca2442..42b2e49 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -371,7 +371,7 @@ static int ath10k_debug_fw_stats_request(struct ath10k *ar)
 
 		ret = wait_for_completion_timeout(&ar->debug.fw_stats_complete,
 						  1*HZ);
-		if (ret <= 0)
+		if (ret == 0)
 			return -ETIMEDOUT;
 
 		spin_lock_bh(&ar->data_lock);
diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c
index f1946a6..2fd9e18 100644
--- a/drivers/net/wireless/ath/ath10k/htc.c
+++ b/drivers/net/wireless/ath/ath10k/htc.c
@@ -703,11 +703,9 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc,
 	/* wait for response */
 	status = wait_for_completion_timeout(&htc->ctl_resp,
 					     ATH10K_HTC_CONN_SVC_TIMEOUT_HZ);
-	if (status <= 0) {
-		if (status == 0)
-			status = -ETIMEDOUT;
+	if (status == 0) {
 		ath10k_err(ar, "Service connect timeout: %d\n", status);
-		return status;
+		return -ETIMEDOUT;
 	}
 
 	/* we controlled the buffer creation, it's aligned */
diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
index ceec764..4f59ab9 100644
--- a/drivers/net/wireless/ath/ath10k/htt.c
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -101,7 +101,7 @@ int ath10k_htt_setup(struct ath10k_htt *htt)
 
 	status = wait_for_completion_timeout(&htt->target_version_received,
 					     HTT_TARGET_VERSION_TIMEOUT_HZ);
-	if (status <= 0) {
+	if (status == 0) {
 		ath10k_warn(ar, "htt version request timed out\n");
 		return -ETIMEDOUT;
 	}
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index c7febfc..b403cba 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2228,7 +2228,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 
 		ret = wait_for_completion_timeout(&ar->offchan_tx_completed,
 						  3 * HZ);
-		if (ret <= 0)
+		if (ret == 0)
 			ath10k_warn(ar, "timed out waiting for offchannel skb %p\n",
 				    skb);
 
-- 
cgit v1.1


From 5de6dfc82f715b9fe9cf5c0cccce4384a82279ef Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Date: Fri, 9 Jan 2015 22:49:46 +0530
Subject: ath10k: Fix potential Rx ring corruption

When replenishing Rx buffers driver updates the address of the
buffer and the index of rx buffer in rx ring to the firmware.
Change in order by CPU can cause rx ring corruption. Add memory
barrier before updating rx buffer index to guarantee the order.

This could fix some instances of rx ring corruption due to done
bit in rx attention flag not set.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 9c782a4..baa1c44 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -97,6 +97,11 @@ static int __ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
 	}
 
 fail:
+	/*
+	 * Make sure the rx buffer is updated before available buffer
+	 * index to avoid any potential rx ring corruption.
+	 */
+	mb();
 	*htt->rx_ring.alloc_idx.vaddr = __cpu_to_le32(idx);
 	return ret;
 }
-- 
cgit v1.1


From a4031afbdc7bfdf26b98b160a5fca05b9cf38140 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Tue, 13 Jan 2015 14:21:45 +0530
Subject: ath10k: fix config_enabled check for hwmon

Because of wrong macro check in commit 96bba98393f9 ("ath10k: fix build error
when hwmon is off"), hwmon never be enabled. Fix that.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c
index b14ae8d..c384c79 100644
--- a/drivers/net/wireless/ath/ath10k/thermal.c
+++ b/drivers/net/wireless/ath/ath10k/thermal.c
@@ -215,7 +215,7 @@ int ath10k_thermal_register(struct ath10k *ar)
 
 	/* Avoid linking error on devm_hwmon_device_register_with_groups, I
 	 * guess linux/hwmon.h is missing proper stubs. */
-	if (!config_enabled(HWMON))
+	if (!config_enabled(CONFIG_HWMON))
 		return 0;
 
 	hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev,
-- 
cgit v1.1


From 6bf1206289115c277cfa569f570a97ada345a2d5 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Tue, 13 Jan 2015 16:30:10 +0200
Subject: ath10k: implement new beacon tx status event

This event is delivered to host by firmware if it
supports beacon templates only.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 50 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 12 ++++++++
 2 files changed, 62 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 57d2b50..67138a6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -58,6 +58,8 @@ static const struct wmi_tlv_policy wmi_tlv_policies[] = {
 		= { .min_len = sizeof(struct wlan_host_mem_req) },
 	[WMI_TLV_TAG_STRUCT_READY_EVENT]
 		= { .min_len = sizeof(struct wmi_tlv_rdy_ev) },
+	[WMI_TLV_TAG_STRUCT_OFFLOAD_BCN_TX_STATUS_EVENT]
+		= { .min_len = sizeof(struct wmi_tlv_bcn_tx_status_ev) },
 };
 
 static int
@@ -156,6 +158,51 @@ static u16 ath10k_wmi_tlv_len(const void *ptr)
 	return __le16_to_cpu((((const struct wmi_tlv *)ptr) - 1)->len);
 }
 
+/**************/
+/* TLV events */
+/**************/
+static int ath10k_wmi_tlv_event_bcn_tx_status(struct ath10k *ar,
+					      struct sk_buff *skb)
+{
+	const void **tb;
+	const struct wmi_tlv_bcn_tx_status_ev *ev;
+	u32 vdev_id, tx_status;
+	int ret;
+
+	tb = ath10k_wmi_tlv_parse_alloc(ar, skb->data, skb->len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ret = PTR_ERR(tb);
+		ath10k_warn(ar, "failed to parse tlv: %d\n", ret);
+		return ret;
+	}
+
+	ev = tb[WMI_TLV_TAG_STRUCT_OFFLOAD_BCN_TX_STATUS_EVENT];
+	if (!ev) {
+		kfree(tb);
+		return -EPROTO;
+	}
+
+	tx_status = __le32_to_cpu(ev->tx_status);
+	vdev_id = __le32_to_cpu(ev->vdev_id);
+
+	switch (tx_status) {
+	case WMI_TLV_BCN_TX_STATUS_OK:
+		break;
+	case WMI_TLV_BCN_TX_STATUS_XRETRY:
+	case WMI_TLV_BCN_TX_STATUS_DROP:
+	case WMI_TLV_BCN_TX_STATUS_FILTERED:
+		/* FIXME: It's probably worth telling mac80211 to stop the
+		 * interface as it is crippled.
+		 */
+		ath10k_warn(ar, "received bcn tmpl tx status on vdev %i: %d",
+			    vdev_id, tx_status);
+		break;
+	}
+
+	kfree(tb);
+	return 0;
+}
+
 /***********/
 /* TLV ops */
 /***********/
@@ -268,6 +315,9 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	case WMI_TLV_READY_EVENTID:
 		ath10k_wmi_event_ready(ar, skb);
 		break;
+	case WMI_TLV_OFFLOAD_BCN_TX_STATUS_EVENTID:
+		ath10k_wmi_tlv_event_bcn_tx_status(ar, skb);
+		break;
 	default:
 		ath10k_warn(ar, "Unknown eventid: %d\n", id);
 		break;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 54ffa12..ee19353 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1375,6 +1375,18 @@ struct wmi_tlv_pktlog_disable {
 	__le32 reserved;
 } __packed;
 
+enum wmi_tlv_bcn_tx_status {
+	WMI_TLV_BCN_TX_STATUS_OK,
+	WMI_TLV_BCN_TX_STATUS_XRETRY,
+	WMI_TLV_BCN_TX_STATUS_DROP,
+	WMI_TLV_BCN_TX_STATUS_FILTERED,
+};
+
+struct wmi_tlv_bcn_tx_status_ev {
+	__le32 vdev_id;
+	__le32 tx_status;
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
-- 
cgit v1.1


From be9ce9d8c196bf150eace10aaf43110672d6eb4c Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Tue, 13 Jan 2015 16:30:11 +0200
Subject: ath10k: implement beacon template command

New firmware revisions may support setting beacon
template. Implement wmi interface for it.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 23 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 65 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 12 ++++++
 drivers/net/wireless/ath/ath10k/wmi.c     |  3 ++
 4 files changed, 103 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 3a3d15e..5469702 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -129,6 +129,10 @@ struct wmi_ops {
 	struct sk_buff *(*gen_delba_send)(struct ath10k *ar, u32 vdev_id,
 					  const u8 *mac, u32 tid, u32 initiator,
 					  u32 reason);
+	struct sk_buff *(*gen_bcn_tmpl)(struct ath10k *ar, u32 vdev_id,
+					u32 tim_ie_offset, struct sk_buff *bcn,
+					u32 prb_caps, u32 prb_erp,
+					void *prb_ies, size_t prb_ies_len);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -935,4 +939,23 @@ ath10k_wmi_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac,
 				   ar->wmi.cmd->delba_send_cmdid);
 }
 
+static inline int
+ath10k_wmi_bcn_tmpl(struct ath10k *ar, u32 vdev_id, u32 tim_ie_offset,
+		    struct sk_buff *bcn, u32 prb_caps, u32 prb_erp,
+		    void *prb_ies, size_t prb_ies_len)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_bcn_tmpl)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_bcn_tmpl(ar, vdev_id, tim_ie_offset, bcn,
+					prb_caps, prb_erp, prb_ies,
+					prb_ies_len);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->bcn_tmpl_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 67138a6..08a9b2b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1972,6 +1972,70 @@ ath10k_wmi_tlv_op_gen_pktlog_disable(struct ath10k *ar)
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_bcn_tmpl(struct ath10k *ar, u32 vdev_id,
+			       u32 tim_ie_offset, struct sk_buff *bcn,
+			       u32 prb_caps, u32 prb_erp, void *prb_ies,
+			       size_t prb_ies_len)
+{
+	struct wmi_tlv_bcn_tmpl_cmd *cmd;
+	struct wmi_tlv_bcn_prb_info *info;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	void *ptr;
+	size_t len;
+
+	if (WARN_ON(prb_ies_len > 0 && !prb_ies))
+		return ERR_PTR(-EINVAL);
+
+	len = sizeof(*tlv) + sizeof(*cmd) +
+	      sizeof(*tlv) + sizeof(*info) + prb_ies_len +
+	      sizeof(*tlv) + roundup(bcn->len, 4);
+	skb = ath10k_wmi_alloc_skb(ar, len);
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	ptr = (void *)skb->data;
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_BCN_TMPL_CMD);
+	tlv->len = __cpu_to_le16(sizeof(*cmd));
+	cmd = (void *)tlv->value;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	cmd->tim_ie_offset = __cpu_to_le32(tim_ie_offset);
+	cmd->buf_len = __cpu_to_le32(bcn->len);
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*cmd);
+
+	/* FIXME: prb_ies_len should be probably aligned to 4byte boundary but
+	 * then it is then impossible to pass original ie len.
+	 * This chunk is not used yet so if setting probe resp template yields
+	 * problems with beaconing or crashes firmware look here.
+	 */
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_BCN_PRB_INFO);
+	tlv->len = __cpu_to_le16(sizeof(*info) + prb_ies_len);
+	info = (void *)tlv->value;
+	info->caps = __cpu_to_le32(prb_caps);
+	info->erp = __cpu_to_le32(prb_erp);
+	memcpy(info->ies, prb_ies, prb_ies_len);
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*info);
+	ptr += prb_ies_len;
+
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_ARRAY_BYTE);
+	tlv->len = __cpu_to_le16(roundup(bcn->len, 4));
+	memcpy(tlv->value, bcn->data, bcn->len);
+
+	/* FIXME: Adjust TSF? */
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv bcn tmpl vdev_id %i\n",
+		   vdev_id);
+	return skb;
+}
+
 /****************/
 /* TLV mappings */
 /****************/
@@ -2261,6 +2325,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	/* .gen_addba_send not implemented */
 	/* .gen_addba_set_resp not implemented */
 	/* .gen_delba_send not implemented */
+	.gen_bcn_tmpl = ath10k_wmi_tlv_op_gen_bcn_tmpl,
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index ee19353..c477365 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1387,6 +1387,18 @@ struct wmi_tlv_bcn_tx_status_ev {
 	__le32 tx_status;
 } __packed;
 
+struct wmi_tlv_bcn_prb_info {
+	__le32 caps;
+	__le32 erp;
+	u8 ies[0];
+} __packed;
+
+struct wmi_tlv_bcn_tmpl_cmd {
+	__le32 vdev_id;
+	__le32 tim_ie_offset;
+	__le32 buf_len;
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 2d3c700..d37a485 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -5038,6 +5038,7 @@ static const struct wmi_ops wmi_ops = {
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
+	/* .gen_bcn_tmpl not implemented */
 };
 
 static const struct wmi_ops wmi_10_1_ops = {
@@ -5096,6 +5097,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
+	/* .gen_bcn_tmpl not implemented */
 };
 
 static const struct wmi_ops wmi_10_2_ops = {
@@ -5214,6 +5216,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.gen_addba_send = ath10k_wmi_op_gen_addba_send,
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
+	/* .gen_bcn_tmpl not implemented */
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
-- 
cgit v1.1


From 4c4955fe4f879fb0bd3bf8630ba23a9811617b59 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Tue, 13 Jan 2015 16:30:11 +0200
Subject: ath10k: implement prb tmpl wmi command

New firmware revisions with beacon templates need
probe templates as well because they don't forward
probe requests to host at all.

This is required for new firmware to work with
direct probe requests (notably required by hidden
ssid AP).

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 17 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 50 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  5 ++++
 drivers/net/wireless/ath/ath10k/wmi.c     |  3 ++
 4 files changed, 75 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 5469702..7084096 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -133,6 +133,8 @@ struct wmi_ops {
 					u32 tim_ie_offset, struct sk_buff *bcn,
 					u32 prb_caps, u32 prb_erp,
 					void *prb_ies, size_t prb_ies_len);
+	struct sk_buff *(*gen_prb_tmpl)(struct ath10k *ar, u32 vdev_id,
+					struct sk_buff *bcn);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -958,4 +960,19 @@ ath10k_wmi_bcn_tmpl(struct ath10k *ar, u32 vdev_id, u32 tim_ie_offset,
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->bcn_tmpl_cmdid);
 }
 
+static inline int
+ath10k_wmi_prb_tmpl(struct ath10k *ar, u32 vdev_id, struct sk_buff *prb)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_prb_tmpl)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_prb_tmpl(ar, vdev_id, prb);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->prb_tmpl_cmdid);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 08a9b2b..29dc094 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2036,6 +2036,55 @@ ath10k_wmi_tlv_op_gen_bcn_tmpl(struct ath10k *ar, u32 vdev_id,
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_prb_tmpl(struct ath10k *ar, u32 vdev_id,
+			       struct sk_buff *prb)
+{
+	struct wmi_tlv_prb_tmpl_cmd *cmd;
+	struct wmi_tlv_bcn_prb_info *info;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	void *ptr;
+	size_t len;
+
+	len = sizeof(*tlv) + sizeof(*cmd) +
+	      sizeof(*tlv) + sizeof(*info) +
+	      sizeof(*tlv) + roundup(prb->len, 4);
+	skb = ath10k_wmi_alloc_skb(ar, len);
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	ptr = (void *)skb->data;
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_PRB_TMPL_CMD);
+	tlv->len = __cpu_to_le16(sizeof(*cmd));
+	cmd = (void *)tlv->value;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	cmd->buf_len = __cpu_to_le32(prb->len);
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*cmd);
+
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_BCN_PRB_INFO);
+	tlv->len = __cpu_to_le16(sizeof(*info));
+	info = (void *)tlv->value;
+	info->caps = 0;
+	info->erp = 0;
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*info);
+
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_ARRAY_BYTE);
+	tlv->len = __cpu_to_le16(roundup(prb->len, 4));
+	memcpy(tlv->value, prb->data, prb->len);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv prb tmpl vdev_id %i\n",
+		   vdev_id);
+	return skb;
+}
+
 /****************/
 /* TLV mappings */
 /****************/
@@ -2326,6 +2375,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	/* .gen_addba_set_resp not implemented */
 	/* .gen_delba_send not implemented */
 	.gen_bcn_tmpl = ath10k_wmi_tlv_op_gen_bcn_tmpl,
+	.gen_prb_tmpl = ath10k_wmi_tlv_op_gen_prb_tmpl,
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index c477365..5772519 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1399,6 +1399,11 @@ struct wmi_tlv_bcn_tmpl_cmd {
 	__le32 buf_len;
 } __packed;
 
+struct wmi_tlv_prb_tmpl_cmd {
+	__le32 vdev_id;
+	__le32 buf_len;
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index d37a485..bfa3862 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -5039,6 +5039,7 @@ static const struct wmi_ops wmi_ops = {
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 	/* .gen_bcn_tmpl not implemented */
+	/* .gen_prb_tmpl not implemented */
 };
 
 static const struct wmi_ops wmi_10_1_ops = {
@@ -5098,6 +5099,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 	/* .gen_bcn_tmpl not implemented */
+	/* .gen_prb_tmpl not implemented */
 };
 
 static const struct wmi_ops wmi_10_2_ops = {
@@ -5217,6 +5219,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp,
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 	/* .gen_bcn_tmpl not implemented */
+	/* .gen_prb_tmpl not implemented */
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
-- 
cgit v1.1


From 369242b4e3f9d29ddead61895f97a3118484f2f1 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Tue, 13 Jan 2015 16:30:11 +0200
Subject: ath10k: implement p2p bcn ie command

Along beacon template host is expected to setup
p2p information elements as well. Implement wmi
interface for it.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 17 +++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 41 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  5 ++++
 drivers/net/wireless/ath/ath10k/wmi.c     |  3 +++
 4 files changed, 66 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 7084096..0dd49a7 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -135,6 +135,8 @@ struct wmi_ops {
 					void *prb_ies, size_t prb_ies_len);
 	struct sk_buff *(*gen_prb_tmpl)(struct ath10k *ar, u32 vdev_id,
 					struct sk_buff *bcn);
+	struct sk_buff *(*gen_p2p_go_bcn_ie)(struct ath10k *ar, u32 vdev_id,
+					     const u8 *p2p_ie);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -975,4 +977,19 @@ ath10k_wmi_prb_tmpl(struct ath10k *ar, u32 vdev_id, struct sk_buff *prb)
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->prb_tmpl_cmdid);
 }
 
+static inline int
+ath10k_wmi_p2p_go_bcn_ie(struct ath10k *ar, u32 vdev_id, const u8 *p2p_ie)
+{
+	struct sk_buff *skb;
+
+	if (!ar->wmi.ops->gen_p2p_go_bcn_ie)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_p2p_go_bcn_ie(ar, vdev_id, p2p_ie);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->p2p_go_set_beacon_ie);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 29dc094..6f34fc7 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2085,6 +2085,46 @@ ath10k_wmi_tlv_op_gen_prb_tmpl(struct ath10k *ar, u32 vdev_id,
 	return skb;
 }
 
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie(struct ath10k *ar, u32 vdev_id,
+				    const u8 *p2p_ie)
+{
+	struct wmi_tlv_p2p_go_bcn_ie *cmd;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	void *ptr;
+	size_t len;
+
+	len = sizeof(*tlv) + sizeof(*cmd) +
+	      sizeof(*tlv) + roundup(p2p_ie[1] + 2, 4);
+	skb = ath10k_wmi_alloc_skb(ar, len);
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	ptr = (void *)skb->data;
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_P2P_GO_SET_BEACON_IE);
+	tlv->len = __cpu_to_le16(sizeof(*cmd));
+	cmd = (void *)tlv->value;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	cmd->ie_len = __cpu_to_le32(p2p_ie[1] + 2);
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*cmd);
+
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_ARRAY_BYTE);
+	tlv->len = __cpu_to_le16(roundup(p2p_ie[1] + 2, 4));
+	memcpy(tlv->value, p2p_ie, p2p_ie[1] + 2);
+
+	ptr += sizeof(*tlv);
+	ptr += roundup(p2p_ie[1] + 2, 4);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv p2p go bcn ie for vdev %i\n",
+		   vdev_id);
+	return skb;
+}
+
 /****************/
 /* TLV mappings */
 /****************/
@@ -2376,6 +2416,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	/* .gen_delba_send not implemented */
 	.gen_bcn_tmpl = ath10k_wmi_tlv_op_gen_bcn_tmpl,
 	.gen_prb_tmpl = ath10k_wmi_tlv_op_gen_prb_tmpl,
+	.gen_p2p_go_bcn_ie = ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie,
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 5772519..eb02290 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1404,6 +1404,11 @@ struct wmi_tlv_prb_tmpl_cmd {
 	__le32 buf_len;
 } __packed;
 
+struct wmi_tlv_p2p_go_bcn_ie {
+	__le32 vdev_id;
+	__le32 ie_len;
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index bfa3862..5fe17e8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -5040,6 +5040,7 @@ static const struct wmi_ops wmi_ops = {
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
+	/* .gen_p2p_go_bcn_ie not implemented */
 };
 
 static const struct wmi_ops wmi_10_1_ops = {
@@ -5100,6 +5101,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
+	/* .gen_p2p_go_bcn_ie not implemented */
 };
 
 static const struct wmi_ops wmi_10_2_ops = {
@@ -5220,6 +5222,7 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	.gen_delba_send = ath10k_wmi_op_gen_delba_send,
 	/* .gen_bcn_tmpl not implemented */
 	/* .gen_prb_tmpl not implemented */
+	/* .gen_p2p_go_bcn_ie not implemented */
 };
 
 int ath10k_wmi_attach(struct ath10k *ar)
-- 
cgit v1.1


From fbb8f1b729b82f2b48350ffc096f107d1a6ea12d Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Tue, 13 Jan 2015 16:30:12 +0200
Subject: ath10k: implement support for ap beacon offloading

New firmware revisions support beacon and probe
response templates instead. This means SWBA events
are no longer delivered for these firmware
revisions.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 162 ++++++++++++++++++++++++++++++++++
 1 file changed, 162 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index b403cba..36dde24 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -967,6 +967,143 @@ static int ath10k_vdev_stop(struct ath10k_vif *arvif)
 	return ret;
 }
 
+static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif,
+				       struct sk_buff *bcn)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_mgmt *mgmt;
+	const u8 *p2p_ie;
+	int ret;
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
+		return 0;
+
+	if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+		return 0;
+
+	mgmt = (void *)bcn->data;
+	p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+					 mgmt->u.beacon.variable,
+					 bcn->len - (mgmt->u.beacon.variable -
+						     bcn->data));
+	if (!p2p_ie)
+		return -ENOENT;
+
+	ret = ath10k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit p2p go bcn ie for vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui,
+				       u8 oui_type, size_t ie_offset)
+{
+	size_t len;
+	const u8 *next;
+	const u8 *end;
+	u8 *ie;
+
+	if (WARN_ON(skb->len < ie_offset))
+		return -EINVAL;
+
+	ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type,
+					   skb->data + ie_offset,
+					   skb->len - ie_offset);
+	if (!ie)
+		return -ENOENT;
+
+	len = ie[1] + 2;
+	end = skb->data + skb->len;
+	next = ie + len;
+
+	if (WARN_ON(next > end))
+		return -EINVAL;
+
+	memmove(ie, next, end - next);
+	skb_trim(skb, skb->len - len);
+
+	return 0;
+}
+
+static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_hw *hw = ar->hw;
+	struct ieee80211_vif *vif = arvif->vif;
+	struct ieee80211_mutable_offsets offs = {};
+	struct sk_buff *bcn;
+	int ret;
+
+	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+		return 0;
+
+	bcn = ieee80211_beacon_get_template(hw, vif, &offs);
+	if (!bcn) {
+		ath10k_warn(ar, "failed to get beacon template from mac80211\n");
+		return -EPERM;
+	}
+
+	ret = ath10k_mac_setup_bcn_p2p_ie(arvif, bcn);
+	if (ret) {
+		ath10k_warn(ar, "failed to setup p2p go bcn ie: %d\n", ret);
+		kfree_skb(bcn);
+		return ret;
+	}
+
+	/* P2P IE is inserted by firmware automatically (as configured above)
+	 * so remove it from the base beacon template to avoid duplicate P2P
+	 * IEs in beacon frames.
+	 */
+	ath10k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+				    offsetof(struct ieee80211_mgmt,
+					     u.beacon.variable));
+
+	ret = ath10k_wmi_bcn_tmpl(ar, arvif->vdev_id, offs.tim_offset, bcn, 0,
+				  0, NULL, 0);
+	kfree_skb(bcn);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to submit beacon template command: %d\n",
+			    ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct ieee80211_hw *hw = ar->hw;
+	struct ieee80211_vif *vif = arvif->vif;
+	struct sk_buff *prb;
+	int ret;
+
+	if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+		return 0;
+
+	prb = ieee80211_proberesp_get(hw, vif);
+	if (!prb) {
+		ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
+		return -EPERM;
+	}
+
+	ret = ath10k_wmi_prb_tmpl(ar, arvif->vdev_id, prb);
+	kfree_skb(prb);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to submit probe resp template command: %d\n",
+			    ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static void ath10k_control_beaconing(struct ath10k_vif *arvif,
 				     struct ieee80211_bss_conf *info)
 {
@@ -3283,6 +3420,18 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 		if (ret)
 			ath10k_warn(ar, "failed to set beacon mode for vdev %d: %i\n",
 				    arvif->vdev_id, ret);
+
+		ret = ath10k_mac_setup_bcn_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to update beacon template: %d\n",
+				    ret);
+	}
+
+	if (changed & BSS_CHANGED_AP_PROBE_RESP) {
+		ret = ath10k_mac_setup_prb_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to setup probe resp template on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
 	}
 
 	if (changed & BSS_CHANGED_BEACON_INFO) {
@@ -5130,6 +5279,19 @@ int ath10k_mac_register(struct ath10k *ar)
 
 	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
 
+	if (test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) {
+		ar->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
+
+		/* Firmware delivers WPS/P2P Probe Requests frames to driver so
+		 * that userspace (e.g. wpa_supplicant/hostapd) can generate
+		 * correct Probe Responses. This is more of a hack advert..
+		 */
+		ar->hw->wiphy->probe_resp_offload |=
+			NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
+			NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
+			NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
+	}
+
 	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 	ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
 	ar->hw->wiphy->max_remain_on_channel_duration = 5000;
-- 
cgit v1.1


From 8bdadac13f65c14d7b6df711793eb31ba9db296e Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Tue, 13 Jan 2015 14:52:14 +0530
Subject: ath10k: fix duration calculation for quiet param

The duty cycle (% of quiet duration) is used to put the device
in quiet mode for the given period. Currently the quiet duration
is wrongly calculated which results in not enabling quiet mode.
Fix the calculation as below

     duration = (period * duty cycle) / 100

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/thermal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c
index c384c79..41cff50 100644
--- a/drivers/net/wireless/ath/ath10k/thermal.c
+++ b/drivers/net/wireless/ath/ath10k/thermal.c
@@ -98,7 +98,7 @@ static int ath10k_thermal_set_cur_dutycycle(struct thermal_cooling_device *cdev,
 	}
 	period = max(ATH10K_QUIET_PERIOD_MIN,
 		     (ATH10K_QUIET_PERIOD_DEFAULT / num_bss));
-	duration = period * (duty_cycle / 100);
+	duration = (period * duty_cycle) / 100;
 	enabled = duration ? 1 : 0;
 
 	ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration,
-- 
cgit v1.1


From a2fa88003213ea2167545b5306b4d54437b857b7 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Mon, 12 Jan 2015 15:29:37 +0100
Subject: ath10k: prevent fw reg dump spam

Originally the explicit fw register dump was added
to wait_for_target_init because interrupts are
masked early during power_up.

Due to some changes in power_up/reset sequences
sometimes when fw crashed ath10k would print the
dump more than once via hif_stop -> warm_reset ->
wait_for_target_init, possibly with different
values each.

Prevent this by doing the explicit fw register
dump only during power_up instead of
wait_for_target_init.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 5e50214..3b40a86 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -1910,6 +1910,12 @@ static int ath10k_pci_hif_power_up(struct ath10k *ar)
 	 */
 	ret = ath10k_pci_chip_reset(ar);
 	if (ret) {
+		if (ath10k_pci_has_fw_crashed(ar)) {
+			ath10k_warn(ar, "firmware crashed during chip reset\n");
+			ath10k_pci_fw_crashed_clear(ar);
+			ath10k_pci_fw_crashed_dump(ar);
+		}
+
 		ath10k_err(ar, "failed to reset chip: %d\n", ret);
 		goto err_sleep;
 	}
@@ -2352,8 +2358,6 @@ static int ath10k_pci_wait_for_target_init(struct ath10k *ar)
 
 	if (val & FW_IND_EVENT_PENDING) {
 		ath10k_warn(ar, "device has crashed during init\n");
-		ath10k_pci_fw_crashed_clear(ar);
-		ath10k_pci_fw_crashed_dump(ar);
 		return -ECOMM;
 	}
 
-- 
cgit v1.1


From f6eaf1e063bc0cb8efbd514aaffe5a4ef575ee02 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 12 Jan 2015 16:07:02 -0500
Subject: ath10k: document switch case fall-through in __ath10k_scan_finish

Add a comment for indicating that the ATH10K_SCAN_RUNNING case falls
through to the ATH10K_SCAN_ABORTING case in __ath10k_scan_finish.  This
will document that the lack of a break is intentional.

Coverity: CID 1260017

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 36dde24..9524bc5 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2427,6 +2427,7 @@ void __ath10k_scan_finish(struct ath10k *ar)
 	case ATH10K_SCAN_RUNNING:
 		if (ar->scan.is_roc)
 			ieee80211_remain_on_channel_expired(ar->hw);
+		/* fall through */
 	case ATH10K_SCAN_ABORTING:
 		if (!ar->scan.is_roc)
 			ieee80211_scan_completed(ar->hw,
-- 
cgit v1.1


From 6d48161678dcbeb1ac1736aaf11d10c55ed9a314 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Tue, 13 Jan 2015 12:44:24 +0530
Subject: ath10k: fix hwmon temperature input units

To be compliant with the hwmon interface the unit needs to be
millidegree Celsius. Fix that.

Reported-by: Matthias Kaehlcke <mka@google.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/thermal.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c
index 41cff50..aede750 100644
--- a/drivers/net/wireless/ath/ath10k/thermal.c
+++ b/drivers/net/wireless/ath/ath10k/thermal.c
@@ -160,7 +160,8 @@ static ssize_t ath10k_thermal_show_temp(struct device *dev,
 	temperature = ar->thermal.temperature;
 	spin_unlock_bh(&ar->data_lock);
 
-	ret = snprintf(buf, PAGE_SIZE, "%d", temperature);
+	/* display in millidegree celcius */
+	ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000);
 out:
 	mutex_unlock(&ar->conf_mutex);
 	return ret;
-- 
cgit v1.1


From c774905d98badddbeb4ad1bc653aedbd7ab024e4 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 25 Jan 2015 10:03:17 +0200
Subject: iwlwifi: mvm: check IWL_UCODE_TLV_API_SCD_CFG in API and not in capa

IWL_UCODE_TLV_API_SCD_CFG is a new API and hence, check if
enabled in the correct field.

Fixes: 0294d9eece86 ("iwlwifi: mvm: let the firmware configure the scheduler")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mvm.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 979ac23..7773ffc 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -874,7 +874,7 @@ static inline bool iwl_mvm_is_d0i3_supported(struct iwl_mvm *mvm)
 
 static inline bool iwl_mvm_is_scd_cfg_supported(struct iwl_mvm *mvm)
 {
-	return mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_API_SCD_CFG;
+	return mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_SCD_CFG;
 }
 
 extern const u8 iwl_mvm_ac_to_tx_fifo[];
-- 
cgit v1.1


From 04de6c6ce612ad159d44572b6ed566e57ecefcab Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:47 +0200
Subject: ath10k: implement diag data container event

Some firmware revisions may report this event as
part of their diagnostics.

This avoids `unknown event` warnings and adds
tracing for the event.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/trace.h   | 41 +++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 68 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 19 +++++++++
 3 files changed, 128 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/trace.h b/drivers/net/wireless/ath/ath10k/trace.h
index b289378..1c541f7 100644
--- a/drivers/net/wireless/ath/ath10k/trace.h
+++ b/drivers/net/wireless/ath/ath10k/trace.h
@@ -453,6 +453,47 @@ TRACE_EVENT(ath10k_htt_rx_desc,
 	 )
 );
 
+TRACE_EVENT(ath10k_wmi_diag_container,
+	    TP_PROTO(struct ath10k *ar,
+		     u8 type,
+		     u32 timestamp,
+		     u32 code,
+		     u16 len,
+		     const void *data),
+
+	TP_ARGS(ar, type, timestamp, code, len, data),
+
+	TP_STRUCT__entry(
+		__string(device, dev_name(ar->dev))
+		__string(driver, dev_driver_string(ar->dev))
+		__field(u8, type)
+		__field(u32, timestamp)
+		__field(u32, code)
+		__field(u16, len)
+		__dynamic_array(u8, data, len)
+	),
+
+	TP_fast_assign(
+		__assign_str(device, dev_name(ar->dev));
+		__assign_str(driver, dev_driver_string(ar->dev));
+		__entry->type = type;
+		__entry->timestamp = timestamp;
+		__entry->code = code;
+		__entry->len = len;
+		memcpy(__get_dynamic_array(data), data, len);
+	),
+
+	TP_printk(
+		"%s %s diag container type %hhu timestamp %u code %u len %d",
+		__get_str(driver),
+		__get_str(device),
+		__entry->type,
+		__entry->timestamp,
+		__entry->code,
+		__entry->len
+	)
+);
+
 #endif /* _TRACE_H_ || TRACE_HEADER_MULTI_READ*/
 
 /* we don't want to use include/trace/events */
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 6f34fc7..56cd51d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -60,6 +60,8 @@ static const struct wmi_tlv_policy wmi_tlv_policies[] = {
 		= { .min_len = sizeof(struct wmi_tlv_rdy_ev) },
 	[WMI_TLV_TAG_STRUCT_OFFLOAD_BCN_TX_STATUS_EVENT]
 		= { .min_len = sizeof(struct wmi_tlv_bcn_tx_status_ev) },
+	[WMI_TLV_TAG_STRUCT_DIAG_DATA_CONTAINER_EVENT]
+		= { .min_len = sizeof(struct wmi_tlv_diag_data_ev) },
 };
 
 static int
@@ -203,6 +205,69 @@ static int ath10k_wmi_tlv_event_bcn_tx_status(struct ath10k *ar,
 	return 0;
 }
 
+static int ath10k_wmi_tlv_event_diag_data(struct ath10k *ar,
+					  struct sk_buff *skb)
+{
+	const void **tb;
+	const struct wmi_tlv_diag_data_ev *ev;
+	const struct wmi_tlv_diag_item *item;
+	const void *data;
+	int ret, num_items, len;
+
+	tb = ath10k_wmi_tlv_parse_alloc(ar, skb->data, skb->len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ret = PTR_ERR(tb);
+		ath10k_warn(ar, "failed to parse tlv: %d\n", ret);
+		return ret;
+	}
+
+	ev = tb[WMI_TLV_TAG_STRUCT_DIAG_DATA_CONTAINER_EVENT];
+	data = tb[WMI_TLV_TAG_ARRAY_BYTE];
+	if (!ev || !data) {
+		kfree(tb);
+		return -EPROTO;
+	}
+
+	num_items = __le32_to_cpu(ev->num_items);
+	len = ath10k_wmi_tlv_len(data);
+
+	while (num_items--) {
+		if (len == 0)
+			break;
+		if (len < sizeof(*item)) {
+			ath10k_warn(ar, "failed to parse diag data: can't fit item header\n");
+			break;
+		}
+
+		item = data;
+
+		if (len < sizeof(*item) + __le16_to_cpu(item->len)) {
+			ath10k_warn(ar, "failed to parse diag data: item is too long\n");
+			break;
+		}
+
+		trace_ath10k_wmi_diag_container(ar,
+						item->type,
+						__le32_to_cpu(item->timestamp),
+						__le32_to_cpu(item->code),
+						__le16_to_cpu(item->len),
+						item->payload);
+
+		len -= sizeof(*item);
+		len -= roundup(__le16_to_cpu(item->len), 4);
+
+		data += sizeof(*item);
+		data += roundup(__le16_to_cpu(item->len), 4);
+	}
+
+	if (num_items != -1 || len != 0)
+		ath10k_warn(ar, "failed to parse diag data event: num_items %d len %d\n",
+			    num_items, len);
+
+	kfree(tb);
+	return 0;
+}
+
 /***********/
 /* TLV ops */
 /***********/
@@ -318,6 +383,9 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	case WMI_TLV_OFFLOAD_BCN_TX_STATUS_EVENTID:
 		ath10k_wmi_tlv_event_bcn_tx_status(ar, skb);
 		break;
+	case WMI_TLV_DIAG_DATA_CONTAINER_EVENTID:
+		ath10k_wmi_tlv_event_diag_data(ar, skb);
+		break;
 	default:
 		ath10k_warn(ar, "Unknown eventid: %d\n", id);
 		break;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index eb02290..87db762 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1409,6 +1409,25 @@ struct wmi_tlv_p2p_go_bcn_ie {
 	__le32 ie_len;
 } __packed;
 
+enum wmi_tlv_diag_item_type {
+	WMI_TLV_DIAG_ITEM_TYPE_FW_EVENT,
+	WMI_TLV_DIAG_ITEM_TYPE_FW_LOG,
+	WMI_TLV_DIAG_ITEM_TYPE_FW_DEBUG_MSG,
+};
+
+struct wmi_tlv_diag_item {
+	u8 type;
+	u8 reserved;
+	__le16 len;
+	__le32 timestamp;
+	__le32 code;
+	u8 payload[0];
+} __packed;
+
+struct wmi_tlv_diag_data_ev {
+	__le32 num_items;
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
-- 
cgit v1.1


From c3113c393e81feb2193e000794498625fe4a7d5d Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:47 +0200
Subject: ath10k: implement diag event

Some firmware revisions may report this event as
part of their diagnostics.

This avoids `unknown event` warnings and adds
tracing for the event.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/trace.h   | 27 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 31 +++++++++++++++++++++++++++++++
 2 files changed, 58 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/trace.h b/drivers/net/wireless/ath/ath10k/trace.h
index 1c541f7..5407887 100644
--- a/drivers/net/wireless/ath/ath10k/trace.h
+++ b/drivers/net/wireless/ath/ath10k/trace.h
@@ -494,6 +494,33 @@ TRACE_EVENT(ath10k_wmi_diag_container,
 	)
 );
 
+TRACE_EVENT(ath10k_wmi_diag,
+	    TP_PROTO(struct ath10k *ar, const void *data, size_t len),
+
+	TP_ARGS(ar, data, len),
+
+	TP_STRUCT__entry(
+		__string(device, dev_name(ar->dev))
+		__string(driver, dev_driver_string(ar->dev))
+		__field(u16, len)
+		__dynamic_array(u8, data, len)
+	),
+
+	TP_fast_assign(
+		__assign_str(device, dev_name(ar->dev));
+		__assign_str(driver, dev_driver_string(ar->dev));
+		__entry->len = len;
+		memcpy(__get_dynamic_array(data), data, len);
+	),
+
+	TP_printk(
+		"%s %s tlv diag len %d",
+		__get_str(driver),
+		__get_str(device),
+		__entry->len
+	)
+);
+
 #endif /* _TRACE_H_ || TRACE_HEADER_MULTI_READ*/
 
 /* we don't want to use include/trace/events */
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 56cd51d..a6c634a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -268,6 +268,34 @@ static int ath10k_wmi_tlv_event_diag_data(struct ath10k *ar,
 	return 0;
 }
 
+static int ath10k_wmi_tlv_event_diag(struct ath10k *ar,
+				     struct sk_buff *skb)
+{
+	const void **tb;
+	const void *data;
+	int ret, len;
+
+	tb = ath10k_wmi_tlv_parse_alloc(ar, skb->data, skb->len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ret = PTR_ERR(tb);
+		ath10k_warn(ar, "failed to parse tlv: %d\n", ret);
+		return ret;
+	}
+
+	data = tb[WMI_TLV_TAG_ARRAY_BYTE];
+	if (!data) {
+		kfree(tb);
+		return -EPROTO;
+	}
+	len = ath10k_wmi_tlv_len(data);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv diag event len %d\n", len);
+	trace_ath10k_wmi_diag(ar, data, len);
+
+	kfree(tb);
+	return 0;
+}
+
 /***********/
 /* TLV ops */
 /***********/
@@ -386,6 +414,9 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	case WMI_TLV_DIAG_DATA_CONTAINER_EVENTID:
 		ath10k_wmi_tlv_event_diag_data(ar, skb);
 		break;
+	case WMI_TLV_DIAG_EVENTID:
+		ath10k_wmi_tlv_event_diag(ar, skb);
+		break;
 	default:
 		ath10k_warn(ar, "Unknown eventid: %d\n", id);
 		break;
-- 
cgit v1.1


From 8582bf3be70f35b6150da37eed9549a585498363 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:47 +0200
Subject: ath10k: introduce struct ath10k_skb_rxcb

It doesn't make much sense to share the
ath10k_skb_cb with Rx path. The Rx path doesn't
need to keep any mac80211's data.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h   | 10 ++++++++++
 drivers/net/wireless/ath/ath10k/htt_rx.c | 10 +++++-----
 drivers/net/wireless/ath/ath10k/pci.c    |  6 +++---
 3 files changed, 18 insertions(+), 8 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index c568612..739d9d69 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -97,6 +97,10 @@ struct ath10k_skb_cb {
 	} bcn;
 } __packed;
 
+struct ath10k_skb_rxcb {
+	dma_addr_t paddr;
+};
+
 static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb)
 {
 	BUILD_BUG_ON(sizeof(struct ath10k_skb_cb) >
@@ -104,6 +108,12 @@ static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb)
 	return (struct ath10k_skb_cb *)&IEEE80211_SKB_CB(skb)->driver_data;
 }
 
+static inline struct ath10k_skb_rxcb *ATH10K_SKB_RXCB(struct sk_buff *skb)
+{
+	BUILD_BUG_ON(sizeof(struct ath10k_skb_rxcb) > sizeof(skb->cb));
+	return (struct ath10k_skb_rxcb *)skb->cb;
+}
+
 static inline u32 host_interest_item_address(u32 item_offset)
 {
 	return QCA988X_HOST_INTEREST_ADDRESS + item_offset;
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index baa1c44..2e55ed7 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -37,12 +37,12 @@ static void ath10k_htt_txrx_compl_task(unsigned long ptr);
 static void ath10k_htt_rx_ring_free(struct ath10k_htt *htt)
 {
 	struct sk_buff *skb;
-	struct ath10k_skb_cb *cb;
+	struct ath10k_skb_rxcb *cb;
 	int i;
 
 	for (i = 0; i < htt->rx_ring.fill_cnt; i++) {
 		skb = htt->rx_ring.netbufs_ring[i];
-		cb = ATH10K_SKB_CB(skb);
+		cb = ATH10K_SKB_RXCB(skb);
 		dma_unmap_single(htt->ar->dev, cb->paddr,
 				 skb->len + skb_tailroom(skb),
 				 DMA_FROM_DEVICE);
@@ -86,7 +86,7 @@ static int __ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
 			goto fail;
 		}
 
-		ATH10K_SKB_CB(skb)->paddr = paddr;
+		ATH10K_SKB_RXCB(skb)->paddr = paddr;
 		htt->rx_ring.netbufs_ring[idx] = skb;
 		htt->rx_ring.paddrs_ring[idx] = __cpu_to_le32(paddr);
 		htt->rx_ring.fill_cnt++;
@@ -168,7 +168,7 @@ static void ath10k_htt_rx_ring_clean_up(struct ath10k_htt *htt)
 		if (!skb)
 			continue;
 
-		dma_unmap_single(htt->ar->dev, ATH10K_SKB_CB(skb)->paddr,
+		dma_unmap_single(htt->ar->dev, ATH10K_SKB_RXCB(skb)->paddr,
 				 skb->len + skb_tailroom(skb),
 				 DMA_FROM_DEVICE);
 		dev_kfree_skb_any(skb);
@@ -224,7 +224,7 @@ static inline struct sk_buff *ath10k_htt_rx_netbuf_pop(struct ath10k_htt *htt)
 	htt->rx_ring.fill_cnt--;
 
 	dma_unmap_single(htt->ar->dev,
-			 ATH10K_SKB_CB(msdu)->paddr,
+			 ATH10K_SKB_RXCB(msdu)->paddr,
 			 msdu->len + skb_tailroom(msdu),
 			 DMA_FROM_DEVICE);
 	ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL, "htt rx netbuf pop: ",
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 3b40a86..b98354c 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -403,7 +403,7 @@ static int __ath10k_pci_rx_post_buf(struct ath10k_pci_pipe *pipe)
 		return -EIO;
 	}
 
-	ATH10K_SKB_CB(skb)->paddr = paddr;
+	ATH10K_SKB_RXCB(skb)->paddr = paddr;
 
 	ret = __ath10k_ce_rx_post_buf(ce_pipe, skb, paddr);
 	if (ret) {
@@ -872,7 +872,7 @@ static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state)
 					     &flags) == 0) {
 		skb = transfer_context;
 		max_nbytes = skb->len + skb_tailroom(skb);
-		dma_unmap_single(ar->dev, ATH10K_SKB_CB(skb)->paddr,
+		dma_unmap_single(ar->dev, ATH10K_SKB_RXCB(skb)->paddr,
 				 max_nbytes, DMA_FROM_DEVICE);
 
 		if (unlikely(max_nbytes < nbytes)) {
@@ -1238,7 +1238,7 @@ static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pci_pipe)
 
 		ce_ring->per_transfer_context[i] = NULL;
 
-		dma_unmap_single(ar->dev, ATH10K_SKB_CB(skb)->paddr,
+		dma_unmap_single(ar->dev, ATH10K_SKB_RXCB(skb)->paddr,
 				 skb->len + skb_tailroom(skb),
 				 DMA_FROM_DEVICE);
 		dev_kfree_skb_any(skb);
-- 
cgit v1.1


From c545070e404bfb20e5b72ae725332fe512e5d22c Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:48 +0200
Subject: ath10k: implement rx reorder support

New firmware and firmware (qca6174 hw3.0+ and fw
266+) are capable of full aggregation rx
reordering. If it's enabled then Rx is handled via
a new, separate htt event.

The rx ring behaviour is changed a little to
support the new rx scheme. These changes shouldn't
affect qca988x performance.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c    |  12 +
 drivers/net/wireless/ath/ath10k/core.h    |   4 +
 drivers/net/wireless/ath/ath10k/htt.h     |  79 ++++++
 drivers/net/wireless/ath/ath10k/htt_rx.c  | 393 +++++++++++++++++++++++++++---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  11 +-
 5 files changed, 463 insertions(+), 36 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index a546575..6860afb 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -1061,6 +1061,18 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 		goto err_hif_stop;
 	}
 
+	/* If firmware indicates Full Rx Reorder support it must be used in a
+	 * slightly different manner. Let HTT code know.
+	 */
+	ar->htt.rx_ring.in_ord_rx = !!(test_bit(WMI_SERVICE_RX_FULL_REORDER,
+						ar->wmi.svc_map));
+
+	status = ath10k_htt_rx_ring_refill(ar);
+	if (status) {
+		ath10k_err(ar, "failed to refill htt rx ring: %d\n", status);
+		goto err_hif_stop;
+	}
+
 	/* we don't care about HTT in UTF mode */
 	if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
 		status = ath10k_htt_setup(&ar->htt);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 739d9d69..774d8ce 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -99,6 +99,7 @@ struct ath10k_skb_cb {
 
 struct ath10k_skb_rxcb {
 	dma_addr_t paddr;
+	struct hlist_node hlist;
 };
 
 static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb)
@@ -114,6 +115,9 @@ static inline struct ath10k_skb_rxcb *ATH10K_SKB_RXCB(struct sk_buff *skb)
 	return (struct ath10k_skb_rxcb *)skb->cb;
 }
 
+#define ATH10K_RXCB_SKB(rxcb) \
+		container_of((void *)rxcb, struct sk_buff, cb)
+
 static inline u32 host_interest_item_address(u32 item_offset)
 {
 	return QCA988X_HOST_INTEREST_ADDRESS + item_offset;
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 8809b37..d1f6eb2 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -21,6 +21,7 @@
 #include <linux/bug.h>
 #include <linux/interrupt.h>
 #include <linux/dmapool.h>
+#include <linux/hashtable.h>
 #include <net/mac80211.h>
 
 #include "htc.h"
@@ -286,7 +287,19 @@ enum htt_t2h_msg_type {
 	HTT_T2H_MSG_TYPE_RC_UPDATE_IND		= 0xc,
 	HTT_T2H_MSG_TYPE_TX_INSPECT_IND		= 0xd,
 	HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION	= 0xe,
+	HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND	= 0xf,
+	HTT_T2H_MSG_TYPE_RX_PN_IND		= 0x10,
+	HTT_T2H_MSG_TYPE_RX_OFFLOAD_DELIVER_IND = 0x11,
+	HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND	= 0x12,
+	/* 0x13 reservd */
+	HTT_T2H_MSG_TYPE_WDI_IPA_OP_RESPONSE	= 0x14,
+
+	/* FIXME: Do not depend on this event id. Numbering of this event id is
+	 * broken across different firmware revisions and HTT version fails to
+	 * indicate this.
+	 */
 	HTT_T2H_MSG_TYPE_TEST,
+
 	/* keep this last */
 	HTT_T2H_NUM_MSGS
 };
@@ -655,6 +668,53 @@ struct htt_rx_fragment_indication {
 #define HTT_RX_FRAG_IND_INFO1_FLUSH_SEQ_NUM_END_MASK   0x00000FC0
 #define HTT_RX_FRAG_IND_INFO1_FLUSH_SEQ_NUM_END_LSB    6
 
+struct htt_rx_pn_ind {
+	__le16 peer_id;
+	u8 tid;
+	u8 seqno_start;
+	u8 seqno_end;
+	u8 pn_ie_count;
+	u8 reserved;
+	u8 pn_ies[0];
+} __packed;
+
+struct htt_rx_offload_msdu {
+	__le16 msdu_len;
+	__le16 peer_id;
+	u8 vdev_id;
+	u8 tid;
+	u8 fw_desc;
+	u8 payload[0];
+} __packed;
+
+struct htt_rx_offload_ind {
+	u8 reserved;
+	__le16 msdu_count;
+} __packed;
+
+struct htt_rx_in_ord_msdu_desc {
+	__le32 msdu_paddr;
+	__le16 msdu_len;
+	u8 fw_desc;
+	u8 reserved;
+} __packed;
+
+struct htt_rx_in_ord_ind {
+	u8 info;
+	__le16 peer_id;
+	u8 vdev_id;
+	u8 reserved;
+	__le16 msdu_count;
+	struct htt_rx_in_ord_msdu_desc msdu_descs[0];
+} __packed;
+
+#define HTT_RX_IN_ORD_IND_INFO_TID_MASK		0x0000001f
+#define HTT_RX_IN_ORD_IND_INFO_TID_LSB		0
+#define HTT_RX_IN_ORD_IND_INFO_OFFLOAD_MASK	0x00000020
+#define HTT_RX_IN_ORD_IND_INFO_OFFLOAD_LSB	5
+#define HTT_RX_IN_ORD_IND_INFO_FRAG_MASK	0x00000040
+#define HTT_RX_IN_ORD_IND_INFO_FRAG_LSB		6
+
 /*
  * target -> host test message definition
  *
@@ -1150,6 +1210,9 @@ struct htt_resp {
 		struct htt_rx_test rx_test;
 		struct htt_pktlog_msg pktlog_msg;
 		struct htt_stats_conf stats_conf;
+		struct htt_rx_pn_ind rx_pn_ind;
+		struct htt_rx_offload_ind rx_offload_ind;
+		struct htt_rx_in_ord_ind rx_in_ord_ind;
 	};
 } __packed;
 
@@ -1197,6 +1260,20 @@ struct ath10k_htt {
 		 * filled.
 		 */
 		struct sk_buff **netbufs_ring;
+
+		/* This is used only with firmware supporting IN_ORD_IND.
+		 *
+		 * With Full Rx Reorder the HTT Rx Ring is more of a temporary
+		 * buffer ring from which buffer addresses are copied by the
+		 * firmware to MAC Rx ring. Firmware then delivers IN_ORD_IND
+		 * pointing to specific (re-ordered) buffers.
+		 *
+		 * FIXME: With kernel generic hashing functions there's a lot
+		 * of hash collisions for sk_buffs.
+		 */
+		bool in_ord_rx;
+		DECLARE_HASHTABLE(skb_table, 4);
+
 		/*
 		 * Ring of buffer addresses -
 		 * This ring holds the "physical" device address of the
@@ -1270,6 +1347,7 @@ struct ath10k_htt {
 	struct tasklet_struct txrx_compl_task;
 	struct sk_buff_head tx_compl_q;
 	struct sk_buff_head rx_compl_q;
+	struct sk_buff_head rx_in_ord_compl_q;
 
 	/* rx_status template */
 	struct ieee80211_rx_status rx_status;
@@ -1333,6 +1411,7 @@ int ath10k_htt_tx_alloc(struct ath10k_htt *htt);
 void ath10k_htt_tx_free(struct ath10k_htt *htt);
 
 int ath10k_htt_rx_alloc(struct ath10k_htt *htt);
+int ath10k_htt_rx_ring_refill(struct ath10k *ar);
 void ath10k_htt_rx_free(struct ath10k_htt *htt);
 
 void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb);
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 2e55ed7..661785f 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -25,8 +25,8 @@
 
 #include <linux/log2.h>
 
-#define HTT_RX_RING_SIZE 1024
-#define HTT_RX_RING_FILL_LEVEL 1000
+#define HTT_RX_RING_SIZE HTT_RX_RING_SIZE_MAX
+#define HTT_RX_RING_FILL_LEVEL (((HTT_RX_RING_SIZE) / 2) - 1)
 
 /* when under memory pressure rx ring refill may fail and needs a retry */
 #define HTT_RX_RING_REFILL_RETRY_MS 50
@@ -34,31 +34,70 @@
 static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb);
 static void ath10k_htt_txrx_compl_task(unsigned long ptr);
 
+static struct sk_buff *
+ath10k_htt_rx_find_skb_paddr(struct ath10k *ar, u32 paddr)
+{
+	struct ath10k_skb_rxcb *rxcb;
+
+	hash_for_each_possible(ar->htt.rx_ring.skb_table, rxcb, hlist, paddr)
+		if (rxcb->paddr == paddr)
+			return ATH10K_RXCB_SKB(rxcb);
+
+	WARN_ON_ONCE(1);
+	return NULL;
+}
+
 static void ath10k_htt_rx_ring_free(struct ath10k_htt *htt)
 {
 	struct sk_buff *skb;
-	struct ath10k_skb_rxcb *cb;
+	struct ath10k_skb_rxcb *rxcb;
+	struct hlist_node *n;
 	int i;
 
-	for (i = 0; i < htt->rx_ring.fill_cnt; i++) {
-		skb = htt->rx_ring.netbufs_ring[i];
-		cb = ATH10K_SKB_RXCB(skb);
-		dma_unmap_single(htt->ar->dev, cb->paddr,
-				 skb->len + skb_tailroom(skb),
-				 DMA_FROM_DEVICE);
-		dev_kfree_skb_any(skb);
+	if (htt->rx_ring.in_ord_rx) {
+		hash_for_each_safe(htt->rx_ring.skb_table, i, n, rxcb, hlist) {
+			skb = ATH10K_RXCB_SKB(rxcb);
+			dma_unmap_single(htt->ar->dev, rxcb->paddr,
+					 skb->len + skb_tailroom(skb),
+					 DMA_FROM_DEVICE);
+			hash_del(&rxcb->hlist);
+			dev_kfree_skb_any(skb);
+		}
+	} else {
+		for (i = 0; i < htt->rx_ring.size; i++) {
+			skb = htt->rx_ring.netbufs_ring[i];
+			if (!skb)
+				continue;
+
+			rxcb = ATH10K_SKB_RXCB(skb);
+			dma_unmap_single(htt->ar->dev, rxcb->paddr,
+					 skb->len + skb_tailroom(skb),
+					 DMA_FROM_DEVICE);
+			dev_kfree_skb_any(skb);
+		}
 	}
 
 	htt->rx_ring.fill_cnt = 0;
+	hash_init(htt->rx_ring.skb_table);
+	memset(htt->rx_ring.netbufs_ring, 0,
+	       htt->rx_ring.size * sizeof(htt->rx_ring.netbufs_ring[0]));
 }
 
 static int __ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
 {
 	struct htt_rx_desc *rx_desc;
+	struct ath10k_skb_rxcb *rxcb;
 	struct sk_buff *skb;
 	dma_addr_t paddr;
 	int ret = 0, idx;
 
+	/* The Full Rx Reorder firmware has no way of telling the host
+	 * implicitly when it copied HTT Rx Ring buffers to MAC Rx Ring.
+	 * To keep things simple make sure ring is always half empty. This
+	 * guarantees there'll be no replenishment overruns possible.
+	 */
+	BUILD_BUG_ON(HTT_RX_RING_FILL_LEVEL >= HTT_RX_RING_SIZE / 2);
+
 	idx = __le32_to_cpu(*htt->rx_ring.alloc_idx.vaddr);
 	while (num > 0) {
 		skb = dev_alloc_skb(HTT_RX_BUF_SIZE + HTT_RX_DESC_ALIGN);
@@ -86,11 +125,18 @@ static int __ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num)
 			goto fail;
 		}
 
-		ATH10K_SKB_RXCB(skb)->paddr = paddr;
+		rxcb = ATH10K_SKB_RXCB(skb);
+		rxcb->paddr = paddr;
 		htt->rx_ring.netbufs_ring[idx] = skb;
 		htt->rx_ring.paddrs_ring[idx] = __cpu_to_le32(paddr);
 		htt->rx_ring.fill_cnt++;
 
+		if (htt->rx_ring.in_ord_rx) {
+			hash_add(htt->rx_ring.skb_table,
+				 &ATH10K_SKB_RXCB(skb)->hlist,
+				 (u32)paddr);
+		}
+
 		num--;
 		idx++;
 		idx &= htt->rx_ring.size_mask;
@@ -158,22 +204,20 @@ static void ath10k_htt_rx_ring_refill_retry(unsigned long arg)
 	ath10k_htt_rx_msdu_buff_replenish(htt);
 }
 
-static void ath10k_htt_rx_ring_clean_up(struct ath10k_htt *htt)
+int ath10k_htt_rx_ring_refill(struct ath10k *ar)
 {
-	struct sk_buff *skb;
-	int i;
+	struct ath10k_htt *htt = &ar->htt;
+	int ret;
 
-	for (i = 0; i < htt->rx_ring.size; i++) {
-		skb = htt->rx_ring.netbufs_ring[i];
-		if (!skb)
-			continue;
+	spin_lock_bh(&htt->rx_ring.lock);
+	ret = ath10k_htt_rx_ring_fill_n(htt, (htt->rx_ring.fill_level -
+					      htt->rx_ring.fill_cnt));
+	spin_unlock_bh(&htt->rx_ring.lock);
 
-		dma_unmap_single(htt->ar->dev, ATH10K_SKB_RXCB(skb)->paddr,
-				 skb->len + skb_tailroom(skb),
-				 DMA_FROM_DEVICE);
-		dev_kfree_skb_any(skb);
-		htt->rx_ring.netbufs_ring[i] = NULL;
-	}
+	if (ret)
+		ath10k_htt_rx_ring_free(htt);
+
+	return ret;
 }
 
 void ath10k_htt_rx_free(struct ath10k_htt *htt)
@@ -184,8 +228,9 @@ void ath10k_htt_rx_free(struct ath10k_htt *htt)
 
 	skb_queue_purge(&htt->tx_compl_q);
 	skb_queue_purge(&htt->rx_compl_q);
+	skb_queue_purge(&htt->rx_in_ord_compl_q);
 
-	ath10k_htt_rx_ring_clean_up(htt);
+	ath10k_htt_rx_ring_free(htt);
 
 	dma_free_coherent(htt->ar->dev,
 			  (htt->rx_ring.size *
@@ -217,6 +262,7 @@ static inline struct sk_buff *ath10k_htt_rx_netbuf_pop(struct ath10k_htt *htt)
 	idx = htt->rx_ring.sw_rd_idx.msdu_payld;
 	msdu = htt->rx_ring.netbufs_ring[idx];
 	htt->rx_ring.netbufs_ring[idx] = NULL;
+	htt->rx_ring.paddrs_ring[idx] = 0;
 
 	idx++;
 	idx &= htt->rx_ring.size_mask;
@@ -384,6 +430,82 @@ static void ath10k_htt_rx_replenish_task(unsigned long ptr)
 	ath10k_htt_rx_msdu_buff_replenish(htt);
 }
 
+static struct sk_buff *ath10k_htt_rx_pop_paddr(struct ath10k_htt *htt,
+					       u32 paddr)
+{
+	struct ath10k *ar = htt->ar;
+	struct ath10k_skb_rxcb *rxcb;
+	struct sk_buff *msdu;
+
+	lockdep_assert_held(&htt->rx_ring.lock);
+
+	msdu = ath10k_htt_rx_find_skb_paddr(ar, paddr);
+	if (!msdu)
+		return NULL;
+
+	rxcb = ATH10K_SKB_RXCB(msdu);
+	hash_del(&rxcb->hlist);
+	htt->rx_ring.fill_cnt--;
+
+	dma_unmap_single(htt->ar->dev, rxcb->paddr,
+			 msdu->len + skb_tailroom(msdu),
+			 DMA_FROM_DEVICE);
+	ath10k_dbg_dump(ar, ATH10K_DBG_HTT_DUMP, NULL, "htt rx netbuf pop: ",
+			msdu->data, msdu->len + skb_tailroom(msdu));
+
+	return msdu;
+}
+
+static int ath10k_htt_rx_pop_paddr_list(struct ath10k_htt *htt,
+					struct htt_rx_in_ord_ind *ev,
+					struct sk_buff_head *list)
+{
+	struct ath10k *ar = htt->ar;
+	struct htt_rx_in_ord_msdu_desc *msdu_desc = ev->msdu_descs;
+	struct htt_rx_desc *rxd;
+	struct sk_buff *msdu;
+	int msdu_count;
+	bool is_offload;
+	u32 paddr;
+
+	lockdep_assert_held(&htt->rx_ring.lock);
+
+	msdu_count = __le16_to_cpu(ev->msdu_count);
+	is_offload = !!(ev->info & HTT_RX_IN_ORD_IND_INFO_OFFLOAD_MASK);
+
+	while (msdu_count--) {
+		paddr = __le32_to_cpu(msdu_desc->msdu_paddr);
+
+		msdu = ath10k_htt_rx_pop_paddr(htt, paddr);
+		if (!msdu) {
+			__skb_queue_purge(list);
+			return -ENOENT;
+		}
+
+		__skb_queue_tail(list, msdu);
+
+		if (!is_offload) {
+			rxd = (void *)msdu->data;
+
+			trace_ath10k_htt_rx_desc(ar, rxd, sizeof(*rxd));
+
+			skb_put(msdu, sizeof(*rxd));
+			skb_pull(msdu, sizeof(*rxd));
+			skb_put(msdu, __le16_to_cpu(msdu_desc->msdu_len));
+
+			if (!(__le32_to_cpu(rxd->attention.flags) &
+			      RX_ATTENTION_FLAGS_MSDU_DONE)) {
+				ath10k_warn(htt->ar, "tried to pop an incomplete frame, oops!\n");
+				return -EIO;
+			}
+		}
+
+		msdu_desc++;
+	}
+
+	return 0;
+}
+
 int ath10k_htt_rx_alloc(struct ath10k_htt *htt)
 {
 	struct ath10k *ar = htt->ar;
@@ -429,7 +551,7 @@ int ath10k_htt_rx_alloc(struct ath10k_htt *htt)
 
 	htt->rx_ring.alloc_idx.vaddr = vaddr;
 	htt->rx_ring.alloc_idx.paddr = paddr;
-	htt->rx_ring.sw_rd_idx.msdu_payld = 0;
+	htt->rx_ring.sw_rd_idx.msdu_payld = htt->rx_ring.size_mask;
 	*htt->rx_ring.alloc_idx.vaddr = 0;
 
 	/* Initialize the Rx refill retry timer */
@@ -438,14 +560,15 @@ int ath10k_htt_rx_alloc(struct ath10k_htt *htt)
 	spin_lock_init(&htt->rx_ring.lock);
 
 	htt->rx_ring.fill_cnt = 0;
-	if (__ath10k_htt_rx_ring_fill_n(htt, htt->rx_ring.fill_level))
-		goto err_fill_ring;
+	htt->rx_ring.sw_rd_idx.msdu_payld = 0;
+	hash_init(htt->rx_ring.skb_table);
 
 	tasklet_init(&htt->rx_replenish_task, ath10k_htt_rx_replenish_task,
 		     (unsigned long)htt);
 
 	skb_queue_head_init(&htt->tx_compl_q);
 	skb_queue_head_init(&htt->rx_compl_q);
+	skb_queue_head_init(&htt->rx_in_ord_compl_q);
 
 	tasklet_init(&htt->txrx_compl_task, ath10k_htt_txrx_compl_task,
 		     (unsigned long)htt);
@@ -454,12 +577,6 @@ int ath10k_htt_rx_alloc(struct ath10k_htt *htt)
 		   htt->rx_ring.size, htt->rx_ring.fill_level);
 	return 0;
 
-err_fill_ring:
-	ath10k_htt_rx_ring_free(htt);
-	dma_free_coherent(htt->ar->dev,
-			  sizeof(*htt->rx_ring.alloc_idx.vaddr),
-			  htt->rx_ring.alloc_idx.vaddr,
-			  htt->rx_ring.alloc_idx.paddr);
 err_dma_idx:
 	dma_free_coherent(htt->ar->dev,
 			  (htt->rx_ring.size *
@@ -1583,6 +1700,194 @@ static void ath10k_htt_rx_delba(struct ath10k *ar, struct htt_resp *resp)
 	spin_unlock_bh(&ar->data_lock);
 }
 
+static int ath10k_htt_rx_extract_amsdu(struct sk_buff_head *list,
+				       struct sk_buff_head *amsdu)
+{
+	struct sk_buff *msdu;
+	struct htt_rx_desc *rxd;
+
+	if (skb_queue_empty(list))
+		return -ENOBUFS;
+
+	if (WARN_ON(!skb_queue_empty(amsdu)))
+		return -EINVAL;
+
+	while ((msdu = __skb_dequeue(list))) {
+		__skb_queue_tail(amsdu, msdu);
+
+		rxd = (void *)msdu->data - sizeof(*rxd);
+		if (rxd->msdu_end.info0 &
+		    __cpu_to_le32(RX_MSDU_END_INFO0_LAST_MSDU))
+			break;
+	}
+
+	msdu = skb_peek_tail(amsdu);
+	rxd = (void *)msdu->data - sizeof(*rxd);
+	if (!(rxd->msdu_end.info0 &
+	      __cpu_to_le32(RX_MSDU_END_INFO0_LAST_MSDU))) {
+		skb_queue_splice_init(amsdu, list);
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+static void ath10k_htt_rx_h_rx_offload_prot(struct ieee80211_rx_status *status,
+					    struct sk_buff *skb)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+
+	if (!ieee80211_has_protected(hdr->frame_control))
+		return;
+
+	/* Offloaded frames are already decrypted but firmware insists they are
+	 * protected in the 802.11 header. Strip the flag.  Otherwise mac80211
+	 * will drop the frame.
+	 */
+
+	hdr->frame_control &= ~__cpu_to_le16(IEEE80211_FCTL_PROTECTED);
+	status->flag |= RX_FLAG_DECRYPTED |
+			RX_FLAG_IV_STRIPPED |
+			RX_FLAG_MMIC_STRIPPED;
+}
+
+static void ath10k_htt_rx_h_rx_offload(struct ath10k *ar,
+				       struct sk_buff_head *list)
+{
+	struct ath10k_htt *htt = &ar->htt;
+	struct ieee80211_rx_status *status = &htt->rx_status;
+	struct htt_rx_offload_msdu *rx;
+	struct sk_buff *msdu;
+	size_t offset;
+
+	while ((msdu = __skb_dequeue(list))) {
+		/* Offloaded frames don't have Rx descriptor. Instead they have
+		 * a short meta information header.
+		 */
+
+		rx = (void *)msdu->data;
+
+		skb_put(msdu, sizeof(*rx));
+		skb_pull(msdu, sizeof(*rx));
+
+		if (skb_tailroom(msdu) < __le16_to_cpu(rx->msdu_len)) {
+			ath10k_warn(ar, "dropping frame: offloaded rx msdu is too long!\n");
+			dev_kfree_skb_any(msdu);
+			continue;
+		}
+
+		skb_put(msdu, __le16_to_cpu(rx->msdu_len));
+
+		/* Offloaded rx header length isn't multiple of 2 nor 4 so the
+		 * actual payload is unaligned. Align the frame.  Otherwise
+		 * mac80211 complains.  This shouldn't reduce performance much
+		 * because these offloaded frames are rare.
+		 */
+		offset = 4 - ((unsigned long)msdu->data & 3);
+		skb_put(msdu, offset);
+		memmove(msdu->data + offset, msdu->data, msdu->len);
+		skb_pull(msdu, offset);
+
+		/* FIXME: The frame is NWifi. Re-construct QoS Control
+		 * if possible later.
+		 */
+
+		memset(status, 0, sizeof(*status));
+		status->flag |= RX_FLAG_NO_SIGNAL_VAL;
+
+		ath10k_htt_rx_h_rx_offload_prot(status, msdu);
+		ath10k_htt_rx_h_channel(ar, status);
+		ath10k_process_rx(ar, status, msdu);
+	}
+}
+
+static void ath10k_htt_rx_in_ord_ind(struct ath10k *ar, struct sk_buff *skb)
+{
+	struct ath10k_htt *htt = &ar->htt;
+	struct htt_resp *resp = (void *)skb->data;
+	struct ieee80211_rx_status *status = &htt->rx_status;
+	struct sk_buff_head list;
+	struct sk_buff_head amsdu;
+	u16 peer_id;
+	u16 msdu_count;
+	u8 vdev_id;
+	u8 tid;
+	bool offload;
+	bool frag;
+	int ret;
+
+	lockdep_assert_held(&htt->rx_ring.lock);
+
+	if (htt->rx_confused)
+		return;
+
+	skb_pull(skb, sizeof(resp->hdr));
+	skb_pull(skb, sizeof(resp->rx_in_ord_ind));
+
+	peer_id = __le16_to_cpu(resp->rx_in_ord_ind.peer_id);
+	msdu_count = __le16_to_cpu(resp->rx_in_ord_ind.msdu_count);
+	vdev_id = resp->rx_in_ord_ind.vdev_id;
+	tid = SM(resp->rx_in_ord_ind.info, HTT_RX_IN_ORD_IND_INFO_TID);
+	offload = !!(resp->rx_in_ord_ind.info &
+			HTT_RX_IN_ORD_IND_INFO_OFFLOAD_MASK);
+	frag = !!(resp->rx_in_ord_ind.info & HTT_RX_IN_ORD_IND_INFO_FRAG_MASK);
+
+	ath10k_dbg(ar, ATH10K_DBG_HTT,
+		   "htt rx in ord vdev %i peer %i tid %i offload %i frag %i msdu count %i\n",
+		   vdev_id, peer_id, tid, offload, frag, msdu_count);
+
+	if (skb->len < msdu_count * sizeof(*resp->rx_in_ord_ind.msdu_descs)) {
+		ath10k_warn(ar, "dropping invalid in order rx indication\n");
+		return;
+	}
+
+	/* The event can deliver more than 1 A-MSDU. Each A-MSDU is later
+	 * extracted and processed.
+	 */
+	__skb_queue_head_init(&list);
+	ret = ath10k_htt_rx_pop_paddr_list(htt, &resp->rx_in_ord_ind, &list);
+	if (ret < 0) {
+		ath10k_warn(ar, "failed to pop paddr list: %d\n", ret);
+		htt->rx_confused = true;
+		return;
+	}
+
+	/* Offloaded frames are very different and need to be handled
+	 * separately.
+	 */
+	if (offload)
+		ath10k_htt_rx_h_rx_offload(ar, &list);
+
+	while (!skb_queue_empty(&list)) {
+		__skb_queue_head_init(&amsdu);
+		ret = ath10k_htt_rx_extract_amsdu(&list, &amsdu);
+		switch (ret) {
+		case 0:
+			/* Note: The in-order indication may report interleaved
+			 * frames from different PPDUs meaning reported rx rate
+			 * to mac80211 isn't accurate/reliable. It's still
+			 * better to report something than nothing though. This
+			 * should still give an idea about rx rate to the user.
+			 */
+			ath10k_htt_rx_h_ppdu(ar, &amsdu, status);
+			ath10k_htt_rx_h_filter(ar, &amsdu, status);
+			ath10k_htt_rx_h_mpdu(ar, &amsdu, status);
+			ath10k_htt_rx_h_deliver(ar, &amsdu, status);
+			break;
+		case -EAGAIN:
+			/* fall through */
+		default:
+			/* Should not happen. */
+			ath10k_warn(ar, "failed to extract amsdu: %d\n", ret);
+			htt->rx_confused = true;
+			__skb_queue_purge(&list);
+			return;
+		}
+	}
+
+	tasklet_schedule(&htt->rx_replenish_task);
+}
+
 void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct ath10k_htt *htt = &ar->htt;
@@ -1705,6 +2010,20 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		 */
 		break;
 	}
+	case HTT_T2H_MSG_TYPE_RX_IN_ORD_PADDR_IND: {
+		spin_lock_bh(&htt->rx_ring.lock);
+		__skb_queue_tail(&htt->rx_in_ord_compl_q, skb);
+		spin_unlock_bh(&htt->rx_ring.lock);
+		tasklet_schedule(&htt->txrx_compl_task);
+		return;
+	}
+	case HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND:
+		/* FIXME: This WMI-TLV event is overlapping with 10.2
+		 * CHAN_CHANGE - both being 0xF. Neither is being used in
+		 * practice so no immediate action is necessary. Nevertheless
+		 * HTT may need an abstraction layer like WMI has one day.
+		 */
+		break;
 	default:
 		ath10k_warn(ar, "htt event (%d) not handled\n",
 			    resp->hdr.msg_type);
@@ -1720,6 +2039,7 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 static void ath10k_htt_txrx_compl_task(unsigned long ptr)
 {
 	struct ath10k_htt *htt = (struct ath10k_htt *)ptr;
+	struct ath10k *ar = htt->ar;
 	struct htt_resp *resp;
 	struct sk_buff *skb;
 
@@ -1736,5 +2056,10 @@ static void ath10k_htt_txrx_compl_task(unsigned long ptr)
 		ath10k_htt_rx_handler(htt, &resp->rx_ind);
 		dev_kfree_skb_any(skb);
 	}
+
+	while ((skb = __skb_dequeue(&htt->rx_in_ord_compl_q))) {
+		ath10k_htt_rx_in_ord_ind(ar, skb);
+		dev_kfree_skb_any(skb);
+	}
 	spin_unlock_bh(&htt->rx_ring.lock);
 }
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index a6c634a..35f5191 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1052,8 +1052,15 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)
 
 	cfg->num_vdevs = __cpu_to_le32(TARGET_TLV_NUM_VDEVS);
 	cfg->num_peers = __cpu_to_le32(TARGET_TLV_NUM_PEERS);
-	cfg->num_offload_peers = __cpu_to_le32(0);
-	cfg->num_offload_reorder_bufs = __cpu_to_le32(0);
+
+	if (test_bit(WMI_SERVICE_RX_FULL_REORDER, ar->wmi.svc_map)) {
+		cfg->num_offload_peers = __cpu_to_le32(3);
+		cfg->num_offload_reorder_bufs = __cpu_to_le32(3);
+	} else {
+		cfg->num_offload_peers = __cpu_to_le32(0);
+		cfg->num_offload_reorder_bufs = __cpu_to_le32(0);
+	}
+
 	cfg->num_peer_keys = __cpu_to_le32(2);
 	cfg->num_tids = __cpu_to_le32(TARGET_TLV_NUM_TIDS);
 	cfg->ast_skid_limit = __cpu_to_le32(0x10);
-- 
cgit v1.1


From 1a7fecb766c83dace747f42b25bbb544b00a0163 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:48 +0200
Subject: ath10k: reset chip before reading chip_id in probe

There are some very rare cases with some hardware
configuration that the device doesn't init quickly
enough in which case reading chip_id yielded 0.
This caused driver to subsequently fail to setup
the device.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index b98354c..e0c9f46 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2544,18 +2544,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_release;
 	}
 
-	chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
-	if (chip_id == 0xffffffff) {
-		ath10k_err(ar, "failed to get chip id\n");
-		goto err_sleep;
-	}
-
-	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
-		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
-			   pdev->device, chip_id);
-		goto err_sleep;
-	}
-
 	ret = ath10k_pci_alloc_pipes(ar);
 	if (ret) {
 		ath10k_err(ar, "failed to allocate copy engine pipes: %d\n",
@@ -2582,6 +2570,24 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		goto err_deinit_irq;
 	}
 
+	ret = ath10k_pci_chip_reset(ar);
+	if (ret) {
+		ath10k_err(ar, "failed to reset chip: %d\n", ret);
+		goto err_free_irq;
+	}
+
+	chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
+	if (chip_id == 0xffffffff) {
+		ath10k_err(ar, "failed to get chip id\n");
+		goto err_free_irq;
+	}
+
+	if (!ath10k_pci_chip_is_supported(pdev->device, chip_id)) {
+		ath10k_err(ar, "device %04x with chip_id %08x isn't supported\n",
+			   pdev->device, chip_id);
+		goto err_sleep;
+	}
+
 	ath10k_pci_sleep(ar);
 
 	ret = ath10k_core_register(ar, chip_id);
-- 
cgit v1.1


From 3ec79e3a75ed062cb0c13ceef0690929b777cf59 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:48 +0200
Subject: ath10k: add support for qca6174 Rx descriptors

The QCA6174 chip has an extra 4 bytes in
rx_ppdu_end structure which is used in htt_rx_desc
and HTT Rx ring offset setup. This is necessary
for correct Rx for QCA6174 (otherwise Rx
descriptors are overwritten and corrupted).

This means QCA988X will have an extra 4 byte
padding in Rx descriptor layout which is harmless.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c  |  2 +-
 drivers/net/wireless/ath/ath10k/rx_desc.h | 25 ++++++++++++++++++++++++-
 2 files changed, 25 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 661785f..c1da44f 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -813,7 +813,7 @@ static void ath10k_htt_rx_h_mactime(struct ath10k *ar,
 	 *
 	 * FIXME: Can we get/compute 64bit TSF?
 	 */
-	status->mactime = __le32_to_cpu(rxd->ppdu_end.tsf_timestamp);
+	status->mactime = __le32_to_cpu(rxd->ppdu_end.common.tsf_timestamp);
 	status->flag |= RX_FLAG_MACTIME_END;
 }
 
diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h
index e1ffdd5..e9cc778 100644
--- a/drivers/net/wireless/ath/ath10k/rx_desc.h
+++ b/drivers/net/wireless/ath/ath10k/rx_desc.h
@@ -850,7 +850,7 @@ struct rx_ppdu_start {
 
 #define RX_PPDU_END_INFO1_PPDU_DONE (1 << 15)
 
-struct rx_ppdu_end {
+struct rx_ppdu_end_common {
 	__le32 evm_p0;
 	__le32 evm_p1;
 	__le32 evm_p2;
@@ -873,10 +873,33 @@ struct rx_ppdu_end {
 	u8 phy_err_code;
 	__le16 flags; /* %RX_PPDU_END_FLAGS_ */
 	__le32 info0; /* %RX_PPDU_END_INFO0_ */
+} __packed;
+
+struct rx_ppdu_end_qca988x {
 	__le16 bb_length;
 	__le16 info1; /* %RX_PPDU_END_INFO1_ */
 } __packed;
 
+#define RX_PPDU_END_RTT_CORRELATION_VALUE_MASK 0x00ffffff
+#define RX_PPDU_END_RTT_CORRELATION_VALUE_LSB  0
+#define RX_PPDU_END_RTT_UNUSED_MASK            0x7f000000
+#define RX_PPDU_END_RTT_UNUSED_LSB             24
+#define RX_PPDU_END_RTT_NORMAL_MODE            BIT(31)
+
+struct rx_ppdu_end_qca6174 {
+	__le32 rtt; /* %RX_PPDU_END_RTT_ */
+	__le16 bb_length;
+	__le16 info1; /* %RX_PPDU_END_INFO1_ */
+} __packed;
+
+struct rx_ppdu_end {
+	struct rx_ppdu_end_common common;
+	union {
+		struct rx_ppdu_end_qca988x qca988x;
+		struct rx_ppdu_end_qca6174 qca6174;
+	} __packed;
+} __packed;
+
 /*
  * evm_p0
  *		EVM for pilot 0.  Contain EVM for streams: 0, 1, 2 and 3.
-- 
cgit v1.1


From d63955b33b3bee45d784ffdfafeb93076c765660 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:49 +0200
Subject: ath10k: add support for qca6174

The QCA6174 in combination with new wmi-tlv firmware is capable of
multi-channel, beamforming, tdls and other features.

This patch just makes it possible to boot these devices and do some basic stuff
like connect to an AP without encryption. Some things may not work or may be
unreliable. New features will be implemented later. This will be addressed
eventually with future patches.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/Makefile    |   3 +-
 drivers/net/wireless/ath/ath10k/ce.c        |  12 ++--
 drivers/net/wireless/ath/ath10k/ce.h        |   2 +-
 drivers/net/wireless/ath/ath10k/core.c      |  44 ++++++++++++
 drivers/net/wireless/ath/ath10k/core.h      |   6 +-
 drivers/net/wireless/ath/ath10k/hw.c        |  58 +++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h        | 102 ++++++++++++++++++++++-----
 drivers/net/wireless/ath/ath10k/pci.c       | 105 ++++++++++++++++++++++++++--
 drivers/net/wireless/ath/ath10k/targaddrs.h |   5 ++
 9 files changed, 302 insertions(+), 35 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath10k/hw.c

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index 6c0c23e..f4dbb3e 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -9,7 +9,8 @@ ath10k_core-y += mac.o \
 		 txrx.o \
 		 wmi.o \
 		 wmi-tlv.o \
-		 bmi.o
+		 bmi.o \
+		 hw.o
 
 ath10k_core-$(CONFIG_ATH10K_DEBUGFS) += spectral.o
 ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
index 42ec793..e508c65 100644
--- a/drivers/net/wireless/ath/ath10k/ce.c
+++ b/drivers/net/wireless/ath/ath10k/ce.c
@@ -803,7 +803,7 @@ int ath10k_ce_disable_interrupts(struct ath10k *ar)
 	int ce_id;
 
 	for (ce_id = 0; ce_id < CE_COUNT; ce_id++) {
-		u32 ctrl_addr = ath10k_ce_base_address(ce_id);
+		u32 ctrl_addr = ath10k_ce_base_address(ar, ce_id);
 
 		ath10k_ce_copy_complete_intr_disable(ar, ctrl_addr);
 		ath10k_ce_error_intr_disable(ar, ctrl_addr);
@@ -832,7 +832,7 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar,
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id];
 	struct ath10k_ce_ring *src_ring = ce_state->src_ring;
-	u32 nentries, ctrl_addr = ath10k_ce_base_address(ce_id);
+	u32 nentries, ctrl_addr = ath10k_ce_base_address(ar, ce_id);
 
 	nentries = roundup_pow_of_two(attr->src_nentries);
 
@@ -869,7 +869,7 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar,
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 	struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id];
 	struct ath10k_ce_ring *dest_ring = ce_state->dest_ring;
-	u32 nentries, ctrl_addr = ath10k_ce_base_address(ce_id);
+	u32 nentries, ctrl_addr = ath10k_ce_base_address(ar, ce_id);
 
 	nentries = roundup_pow_of_two(attr->dest_nentries);
 
@@ -1051,7 +1051,7 @@ int ath10k_ce_init_pipe(struct ath10k *ar, unsigned int ce_id,
 
 static void ath10k_ce_deinit_src_ring(struct ath10k *ar, unsigned int ce_id)
 {
-	u32 ctrl_addr = ath10k_ce_base_address(ce_id);
+	u32 ctrl_addr = ath10k_ce_base_address(ar, ce_id);
 
 	ath10k_ce_src_ring_base_addr_set(ar, ctrl_addr, 0);
 	ath10k_ce_src_ring_size_set(ar, ctrl_addr, 0);
@@ -1061,7 +1061,7 @@ static void ath10k_ce_deinit_src_ring(struct ath10k *ar, unsigned int ce_id)
 
 static void ath10k_ce_deinit_dest_ring(struct ath10k *ar, unsigned int ce_id)
 {
-	u32 ctrl_addr = ath10k_ce_base_address(ce_id);
+	u32 ctrl_addr = ath10k_ce_base_address(ar, ce_id);
 
 	ath10k_ce_dest_ring_base_addr_set(ar, ctrl_addr, 0);
 	ath10k_ce_dest_ring_size_set(ar, ctrl_addr, 0);
@@ -1098,7 +1098,7 @@ int ath10k_ce_alloc_pipe(struct ath10k *ar, int ce_id,
 
 	ce_state->ar = ar;
 	ce_state->id = ce_id;
-	ce_state->ctrl_addr = ath10k_ce_base_address(ce_id);
+	ce_state->ctrl_addr = ath10k_ce_base_address(ar, ce_id);
 	ce_state->attr_flags = attr->flags;
 	ce_state->src_sz_max = attr->src_sz_max;
 
diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h
index 617a151..c18647b 100644
--- a/drivers/net/wireless/ath/ath10k/ce.h
+++ b/drivers/net/wireless/ath/ath10k/ce.h
@@ -394,7 +394,7 @@ struct ce_attr {
 #define DST_WATERMARK_HIGH_RESET		0
 #define DST_WATERMARK_ADDRESS			0x0050
 
-static inline u32 ath10k_ce_base_address(unsigned int ce_id)
+static inline u32 ath10k_ce_base_address(struct ath10k *ar, unsigned int ce_id)
 {
 	return CE0_BASE_ADDRESS + (CE1_BASE_ADDRESS - CE0_BASE_ADDRESS) * ce_id;
 }
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 6860afb..5e9e1a6 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -57,6 +57,34 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
 		},
 	},
+	{
+		.id = QCA6174_HW_2_1_VERSION,
+		.name = "qca6174 hw2.1",
+		.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
+		.uart_pin = 6,
+		.fw = {
+			.dir = QCA6174_HW_2_1_FW_DIR,
+			.fw = QCA6174_HW_2_1_FW_FILE,
+			.otp = QCA6174_HW_2_1_OTP_FILE,
+			.board = QCA6174_HW_2_1_BOARD_DATA_FILE,
+			.board_size = QCA6174_BOARD_DATA_SZ,
+			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
+		},
+	},
+	{
+		.id = QCA6174_HW_3_0_VERSION,
+		.name = "qca6174 hw3.0",
+		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
+		.uart_pin = 6,
+		.fw = {
+			.dir = QCA6174_HW_3_0_FW_DIR,
+			.fw = QCA6174_HW_3_0_FW_FILE,
+			.otp = QCA6174_HW_3_0_OTP_FILE,
+			.board = QCA6174_HW_3_0_BOARD_DATA_FILE,
+			.board_size = QCA6174_BOARD_DATA_SZ,
+			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
+		},
+	},
 };
 
 static void ath10k_send_suspend_complete(struct ath10k *ar)
@@ -1308,6 +1336,7 @@ EXPORT_SYMBOL(ath10k_core_unregister);
 
 struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 				  enum ath10k_bus bus,
+				  enum ath10k_hw_rev hw_rev,
 				  const struct ath10k_hif_ops *hif_ops)
 {
 	struct ath10k *ar;
@@ -1320,9 +1349,24 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 	ar->ath_common.priv = ar;
 	ar->ath_common.hw = ar->hw;
 	ar->dev = dev;
+	ar->hw_rev = hw_rev;
 	ar->hif.ops = hif_ops;
 	ar->hif.bus = bus;
 
+	switch (hw_rev) {
+	case ATH10K_HW_QCA988X:
+		ar->regs = &qca988x_regs;
+		break;
+	case ATH10K_HW_QCA6174:
+		ar->regs = &qca6174_regs;
+		break;
+	default:
+		ath10k_err(ar, "unsupported core hardware revision %d\n",
+			   hw_rev);
+		ret = -ENOTSUPP;
+		goto err_free_mac;
+	}
+
 	init_completion(&ar->scan.started);
 	init_completion(&ar->scan.completed);
 	init_completion(&ar->scan.on_channel);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 774d8ce..2d9f871 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -471,6 +471,7 @@ struct ath10k {
 	struct device *dev;
 	u8 mac_addr[ETH_ALEN];
 
+	enum ath10k_hw_rev hw_rev;
 	u32 chip_id;
 	u32 target_version;
 	u8 fw_version_major;
@@ -486,9 +487,6 @@ struct ath10k {
 
 	DECLARE_BITMAP(fw_features, ATH10K_FW_FEATURE_COUNT);
 
-	struct targetdef *targetdef;
-	struct hostdef *hostdef;
-
 	bool p2p;
 
 	struct {
@@ -498,6 +496,7 @@ struct ath10k {
 
 	struct completion target_suspend;
 
+	const struct ath10k_hw_regs *regs;
 	struct ath10k_bmi bmi;
 	struct ath10k_wmi wmi;
 	struct ath10k_htc htc;
@@ -662,6 +661,7 @@ struct ath10k {
 
 struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 				  enum ath10k_bus bus,
+				  enum ath10k_hw_rev hw_rev,
 				  const struct ath10k_hif_ops *hif_ops);
 void ath10k_core_destroy(struct ath10k *ar);
 
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
new file mode 100644
index 0000000..839a879
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2014-2015 Qualcomm Atheros, Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/types.h>
+#include "hw.h"
+
+const struct ath10k_hw_regs qca988x_regs = {
+	.rtc_state_cold_reset_mask	= 0x00000400,
+	.rtc_soc_base_address		= 0x00004000,
+	.rtc_wmac_base_address		= 0x00005000,
+	.soc_core_base_address		= 0x00009000,
+	.ce_wrapper_base_address	= 0x00057000,
+	.ce0_base_address		= 0x00057400,
+	.ce1_base_address		= 0x00057800,
+	.ce2_base_address		= 0x00057c00,
+	.ce3_base_address		= 0x00058000,
+	.ce4_base_address		= 0x00058400,
+	.ce5_base_address		= 0x00058800,
+	.ce6_base_address		= 0x00058c00,
+	.ce7_base_address		= 0x00059000,
+	.soc_reset_control_si0_rst_mask	= 0x00000001,
+	.soc_reset_control_ce_rst_mask	= 0x00040000,
+	.soc_chip_id_address		= 0x00ec,
+	.scratch_3_address		= 0x0030,
+};
+
+const struct ath10k_hw_regs qca6174_regs = {
+	.rtc_state_cold_reset_mask		= 0x00002000,
+	.rtc_soc_base_address			= 0x00000800,
+	.rtc_wmac_base_address			= 0x00001000,
+	.soc_core_base_address			= 0x0003a000,
+	.ce_wrapper_base_address		= 0x00034000,
+	.ce0_base_address			= 0x00034400,
+	.ce1_base_address			= 0x00034800,
+	.ce2_base_address			= 0x00034c00,
+	.ce3_base_address			= 0x00035000,
+	.ce4_base_address			= 0x00035400,
+	.ce5_base_address			= 0x00035800,
+	.ce6_base_address			= 0x00035c00,
+	.ce7_base_address			= 0x00036000,
+	.soc_reset_control_si0_rst_mask		= 0x00000000,
+	.soc_reset_control_ce_rst_mask		= 0x00000001,
+	.soc_chip_id_address			= 0x000f0,
+	.scratch_3_address			= 0x0028,
+};
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 7b771ae..5771278 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -34,6 +34,43 @@
 #define QCA988X_HW_2_0_BOARD_DATA_FILE	"board.bin"
 #define QCA988X_HW_2_0_PATCH_LOAD_ADDR	0x1234
 
+/* QCA6174 target BMI version signatures */
+#define QCA6174_HW_1_0_VERSION		0x05000000
+#define QCA6174_HW_1_1_VERSION		0x05000001
+#define QCA6174_HW_1_3_VERSION		0x05000003
+#define QCA6174_HW_2_1_VERSION		0x05010000
+#define QCA6174_HW_3_0_VERSION		0x05020000
+
+enum qca6174_pci_rev {
+	QCA6174_PCI_REV_1_1 = 0x11,
+	QCA6174_PCI_REV_1_3 = 0x13,
+	QCA6174_PCI_REV_2_0 = 0x20,
+	QCA6174_PCI_REV_3_0 = 0x30,
+};
+
+enum qca6174_chip_id_rev {
+	QCA6174_HW_1_0_CHIP_ID_REV = 0,
+	QCA6174_HW_1_1_CHIP_ID_REV = 1,
+	QCA6174_HW_1_3_CHIP_ID_REV = 2,
+	QCA6174_HW_2_1_CHIP_ID_REV = 4,
+	QCA6174_HW_2_2_CHIP_ID_REV = 5,
+	QCA6174_HW_3_0_CHIP_ID_REV = 8,
+	QCA6174_HW_3_1_CHIP_ID_REV = 9,
+	QCA6174_HW_3_2_CHIP_ID_REV = 10,
+};
+
+#define QCA6174_HW_2_1_FW_DIR		"ath10k/QCA6174/hw2.1"
+#define QCA6174_HW_2_1_FW_FILE		"firmware.bin"
+#define QCA6174_HW_2_1_OTP_FILE		"otp.bin"
+#define QCA6174_HW_2_1_BOARD_DATA_FILE	"board.bin"
+#define QCA6174_HW_2_1_PATCH_LOAD_ADDR	0x1234
+
+#define QCA6174_HW_3_0_FW_DIR		"ath10k/QCA6174/hw3.0"
+#define QCA6174_HW_3_0_FW_FILE		"firmware.bin"
+#define QCA6174_HW_3_0_OTP_FILE		"otp.bin"
+#define QCA6174_HW_3_0_BOARD_DATA_FILE	"board.bin"
+#define QCA6174_HW_3_0_PATCH_LOAD_ADDR	0x1234
+
 #define ATH10K_FW_API2_FILE		"firmware-2.bin"
 #define ATH10K_FW_API3_FILE		"firmware-3.bin"
 
@@ -81,6 +118,37 @@ enum ath10k_fw_wmi_op_version {
 	ATH10K_FW_WMI_OP_VERSION_MAX,
 };
 
+enum ath10k_hw_rev {
+	ATH10K_HW_QCA988X,
+	ATH10K_HW_QCA6174,
+};
+
+struct ath10k_hw_regs {
+	u32 rtc_state_cold_reset_mask;
+	u32 rtc_soc_base_address;
+	u32 rtc_wmac_base_address;
+	u32 soc_core_base_address;
+	u32 ce_wrapper_base_address;
+	u32 ce0_base_address;
+	u32 ce1_base_address;
+	u32 ce2_base_address;
+	u32 ce3_base_address;
+	u32 ce4_base_address;
+	u32 ce5_base_address;
+	u32 ce6_base_address;
+	u32 ce7_base_address;
+	u32 soc_reset_control_si0_rst_mask;
+	u32 soc_reset_control_ce_rst_mask;
+	u32 soc_chip_id_address;
+	u32 scratch_3_address;
+};
+
+extern const struct ath10k_hw_regs qca988x_regs;
+extern const struct ath10k_hw_regs qca6174_regs;
+
+#define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X)
+#define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)
+
 /* Known pecularities:
  *  - current FW doesn't support raw rx mode (last tested v599)
  *  - current FW dumps upon raw tx mode (last tested v599)
@@ -225,7 +293,7 @@ struct ath10k_pktlog_hdr {
 /* as of IP3.7.1 */
 #define RTC_STATE_V_ON				3
 
-#define RTC_STATE_COLD_RESET_MASK		0x00000400
+#define RTC_STATE_COLD_RESET_MASK		ar->regs->rtc_state_cold_reset_mask
 #define RTC_STATE_V_LSB				0
 #define RTC_STATE_V_MASK			0x00000007
 #define RTC_STATE_ADDRESS			0x0000
@@ -234,12 +302,12 @@ struct ath10k_pktlog_hdr {
 #define PCIE_SOC_WAKE_RESET			0x00000000
 #define SOC_GLOBAL_RESET_ADDRESS		0x0008
 
-#define RTC_SOC_BASE_ADDRESS			0x00004000
-#define RTC_WMAC_BASE_ADDRESS			0x00005000
+#define RTC_SOC_BASE_ADDRESS			ar->regs->rtc_soc_base_address
+#define RTC_WMAC_BASE_ADDRESS			ar->regs->rtc_wmac_base_address
 #define MAC_COEX_BASE_ADDRESS			0x00006000
 #define BT_COEX_BASE_ADDRESS			0x00007000
 #define SOC_PCIE_BASE_ADDRESS			0x00008000
-#define SOC_CORE_BASE_ADDRESS			0x00009000
+#define SOC_CORE_BASE_ADDRESS			ar->regs->soc_core_base_address
 #define WLAN_UART_BASE_ADDRESS			0x0000c000
 #define WLAN_SI_BASE_ADDRESS			0x00010000
 #define WLAN_GPIO_BASE_ADDRESS			0x00014000
@@ -248,23 +316,23 @@ struct ath10k_pktlog_hdr {
 #define EFUSE_BASE_ADDRESS			0x00030000
 #define FPGA_REG_BASE_ADDRESS			0x00039000
 #define WLAN_UART2_BASE_ADDRESS			0x00054c00
-#define CE_WRAPPER_BASE_ADDRESS			0x00057000
-#define CE0_BASE_ADDRESS			0x00057400
-#define CE1_BASE_ADDRESS			0x00057800
-#define CE2_BASE_ADDRESS			0x00057c00
-#define CE3_BASE_ADDRESS			0x00058000
-#define CE4_BASE_ADDRESS			0x00058400
-#define CE5_BASE_ADDRESS			0x00058800
-#define CE6_BASE_ADDRESS			0x00058c00
-#define CE7_BASE_ADDRESS			0x00059000
+#define CE_WRAPPER_BASE_ADDRESS			ar->regs->ce_wrapper_base_address
+#define CE0_BASE_ADDRESS			ar->regs->ce0_base_address
+#define CE1_BASE_ADDRESS			ar->regs->ce1_base_address
+#define CE2_BASE_ADDRESS			ar->regs->ce2_base_address
+#define CE3_BASE_ADDRESS			ar->regs->ce3_base_address
+#define CE4_BASE_ADDRESS			ar->regs->ce4_base_address
+#define CE5_BASE_ADDRESS			ar->regs->ce5_base_address
+#define CE6_BASE_ADDRESS			ar->regs->ce6_base_address
+#define CE7_BASE_ADDRESS			ar->regs->ce7_base_address
 #define DBI_BASE_ADDRESS			0x00060000
 #define WLAN_ANALOG_INTF_PCIE_BASE_ADDRESS	0x0006c000
 #define PCIE_LOCAL_BASE_ADDRESS			0x00080000
 
 #define SOC_RESET_CONTROL_ADDRESS		0x00000000
 #define SOC_RESET_CONTROL_OFFSET		0x00000000
-#define SOC_RESET_CONTROL_SI0_RST_MASK		0x00000001
-#define SOC_RESET_CONTROL_CE_RST_MASK		0x00040000
+#define SOC_RESET_CONTROL_SI0_RST_MASK		ar->regs->soc_reset_control_si0_rst_mask
+#define SOC_RESET_CONTROL_CE_RST_MASK		ar->regs->soc_reset_control_ce_rst_mask
 #define SOC_RESET_CONTROL_CPU_WARM_RST_MASK	0x00000040
 #define SOC_CPU_CLOCK_OFFSET			0x00000020
 #define SOC_CPU_CLOCK_STANDARD_LSB		0
@@ -278,7 +346,7 @@ struct ath10k_pktlog_hdr {
 #define SOC_LF_TIMER_CONTROL0_ADDRESS		0x00000050
 #define SOC_LF_TIMER_CONTROL0_ENABLE_MASK	0x00000004
 
-#define SOC_CHIP_ID_ADDRESS			0x000000ec
+#define SOC_CHIP_ID_ADDRESS			ar->regs->soc_chip_id_address
 #define SOC_CHIP_ID_REV_LSB			8
 #define SOC_CHIP_ID_REV_MASK			0x00000f00
 
@@ -334,7 +402,7 @@ struct ath10k_pktlog_hdr {
 #define PCIE_INTR_ENABLE_ADDRESS		0x0008
 #define PCIE_INTR_CAUSE_ADDRESS			0x000c
 #define PCIE_INTR_CLR_ADDRESS			0x0014
-#define SCRATCH_3_ADDRESS			0x0030
+#define SCRATCH_3_ADDRESS			ar->regs->scratch_3_address
 #define CPU_INTR_ADDRESS			0x0010
 
 /* Firmware indications to the Host via SCRATCH_3 register. */
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index e0c9f46..a31746d 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -58,9 +58,11 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
 #define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
 
 #define QCA988X_2_0_DEVICE_ID	(0x003c)
+#define QCA6174_2_1_DEVICE_ID	(0x003e)
 
 static const struct pci_device_id ath10k_pci_id_table[] = {
 	{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
+	{ PCI_VDEVICE(ATHEROS, QCA6174_2_1_DEVICE_ID) }, /* PCI-E QCA6174 V2.1 */
 	{0}
 };
 
@@ -70,6 +72,11 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
 	 * because of that.
 	 */
 	{ QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_2_1_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_2_2_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_0_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_1_CHIP_ID_REV },
+	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
 };
 
 static void ath10k_pci_buffer_cleanup(struct ath10k *ar);
@@ -1506,6 +1513,35 @@ static int ath10k_pci_wake_target_cpu(struct ath10k *ar)
 	return 0;
 }
 
+static int ath10k_pci_get_num_banks(struct ath10k *ar)
+{
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+
+	switch (ar_pci->pdev->device) {
+	case QCA988X_2_0_DEVICE_ID:
+		return 1;
+	case QCA6174_2_1_DEVICE_ID:
+		switch (MS(ar->chip_id, SOC_CHIP_ID_REV)) {
+		case QCA6174_HW_1_0_CHIP_ID_REV:
+		case QCA6174_HW_1_1_CHIP_ID_REV:
+			return 3;
+		case QCA6174_HW_1_3_CHIP_ID_REV:
+			return 2;
+		case QCA6174_HW_2_1_CHIP_ID_REV:
+		case QCA6174_HW_2_2_CHIP_ID_REV:
+			return 6;
+		case QCA6174_HW_3_0_CHIP_ID_REV:
+		case QCA6174_HW_3_1_CHIP_ID_REV:
+		case QCA6174_HW_3_2_CHIP_ID_REV:
+			return 9;
+		}
+		break;
+	}
+
+	ath10k_warn(ar, "unknown number of banks, assuming 1\n");
+	return 1;
+}
+
 static int ath10k_pci_init_config(struct ath10k *ar)
 {
 	u32 interconnect_targ_addr;
@@ -1616,7 +1652,8 @@ static int ath10k_pci_init_config(struct ath10k *ar)
 	/* first bank is switched to IRAM */
 	ealloc_value |= ((HI_EARLY_ALLOC_MAGIC << HI_EARLY_ALLOC_MAGIC_SHIFT) &
 			 HI_EARLY_ALLOC_MAGIC_MASK);
-	ealloc_value |= ((1 << HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) &
+	ealloc_value |= ((ath10k_pci_get_num_banks(ar) <<
+			  HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) &
 			 HI_EARLY_ALLOC_IRAM_BANKS_MASK);
 
 	ret = ath10k_pci_diag_write32(ar, ealloc_targ_addr, ealloc_value);
@@ -1812,12 +1849,12 @@ static int ath10k_pci_warm_reset(struct ath10k *ar)
 	return 0;
 }
 
-static int ath10k_pci_chip_reset(struct ath10k *ar)
+static int ath10k_pci_qca988x_chip_reset(struct ath10k *ar)
 {
 	int i, ret;
 	u32 val;
 
-	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip reset\n");
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot 988x chip reset\n");
 
 	/* Some hardware revisions (e.g. CUS223v2) has issues with cold reset.
 	 * It is thus preferred to use warm reset which is safer but may not be
@@ -1881,11 +1918,53 @@ static int ath10k_pci_chip_reset(struct ath10k *ar)
 		return ret;
 	}
 
-	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot chip reset complete (cold)\n");
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca988x chip reset complete (cold)\n");
+
+	return 0;
+}
+
+static int ath10k_pci_qca6174_chip_reset(struct ath10k *ar)
+{
+	int ret;
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca6174 chip reset\n");
+
+	/* FIXME: QCA6174 requires cold + warm reset to work. */
+
+	ret = ath10k_pci_cold_reset(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to cold reset: %d\n", ret);
+		return ret;
+	}
+
+	ret = ath10k_pci_wait_for_target_init(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to wait for target after cold reset: %d\n",
+				ret);
+		return ret;
+	}
+
+	ret = ath10k_pci_warm_reset(ar);
+	if (ret) {
+		ath10k_warn(ar, "failed to warm reset: %d\n", ret);
+		return ret;
+	}
+
+	ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot qca6174 chip reset complete (cold)\n");
 
 	return 0;
 }
 
+static int ath10k_pci_chip_reset(struct ath10k *ar)
+{
+	if (QCA_REV_988X(ar))
+		return ath10k_pci_qca988x_chip_reset(ar);
+	else if (QCA_REV_6174(ar))
+		return ath10k_pci_qca6174_chip_reset(ar);
+	else
+		return -ENOTSUPP;
+}
+
 static int ath10k_pci_hif_power_up(struct ath10k *ar)
 {
 	int ret;
@@ -2511,11 +2590,23 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	int ret = 0;
 	struct ath10k *ar;
 	struct ath10k_pci *ar_pci;
+	enum ath10k_hw_rev hw_rev;
 	u32 chip_id;
 
-	ar = ath10k_core_create(sizeof(*ar_pci), &pdev->dev,
-				ATH10K_BUS_PCI,
-				&ath10k_pci_hif_ops);
+	switch (pci_dev->device) {
+	case QCA988X_2_0_DEVICE_ID:
+		hw_rev = ATH10K_HW_QCA988X;
+		break;
+	case QCA6174_2_1_DEVICE_ID:
+		hw_rev = ATH10K_HW_QCA6174;
+		break;
+	default:
+		WARN_ON(1);
+		return -ENOTSUPP;
+	}
+
+	ar = ath10k_core_create(sizeof(*ar_pci), &pdev->dev, ATH10K_BUS_PCI,
+				hw_rev, &ath10k_pci_hif_ops);
 	if (!ar) {
 		dev_err(&pdev->dev, "failed to allocate core\n");
 		return -ENOMEM;
diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h b/drivers/net/wireless/ath/ath10k/targaddrs.h
index 9d0ae30..a417aae 100644
--- a/drivers/net/wireless/ath/ath10k/targaddrs.h
+++ b/drivers/net/wireless/ath/ath10k/targaddrs.h
@@ -18,6 +18,8 @@
 #ifndef __TARGADDRS_H__
 #define __TARGADDRS_H__
 
+#include "hw.h"
+
 /*
  * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the
  * host_interest structure.  It must match the address of the _host_interest
@@ -445,4 +447,7 @@ Fw Mode/SubMode Mask
 #define QCA988X_BOARD_DATA_SZ     7168
 #define QCA988X_BOARD_EXT_DATA_SZ 0
 
+#define QCA6174_BOARD_DATA_SZ     8192
+#define QCA6174_BOARD_EXT_DATA_SZ 0
+
 #endif /* __TARGADDRS_H__ */
-- 
cgit v1.1


From b91251fbe88c9db1a7af29cfe49ca50aa4da9cd2 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:49 +0200
Subject: ath10k: split fw pdev stats parsing

This will make it easier to implement fw stats
parsing for firmware 10.2.

This also renames a few structures for
consistency.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 117 +++++++++++++++++++---------------
 drivers/net/wireless/ath/ath10k/wmi.h |  55 ++++++++++------
 2 files changed, 100 insertions(+), 72 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 5fe17e8..ce095da 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1680,12 +1680,9 @@ int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb)
 	return 0;
 }
 
-void ath10k_wmi_pull_pdev_stats(const struct wmi_pdev_stats *src,
-				struct ath10k_fw_stats_pdev *dst)
+void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
+				     struct ath10k_fw_stats_pdev *dst)
 {
-	const struct wal_dbg_tx_stats *tx = &src->wal.tx;
-	const struct wal_dbg_rx_stats *rx = &src->wal.rx;
-
 	dst->ch_noise_floor = __le32_to_cpu(src->chan_nf);
 	dst->tx_frame_count = __le32_to_cpu(src->tx_frame_count);
 	dst->rx_frame_count = __le32_to_cpu(src->rx_frame_count);
@@ -1693,44 +1690,63 @@ void ath10k_wmi_pull_pdev_stats(const struct wmi_pdev_stats *src,
 	dst->cycle_count = __le32_to_cpu(src->cycle_count);
 	dst->phy_err_count = __le32_to_cpu(src->phy_err_count);
 	dst->chan_tx_power = __le32_to_cpu(src->chan_tx_pwr);
+}
 
-	dst->comp_queued = __le32_to_cpu(tx->comp_queued);
-	dst->comp_delivered = __le32_to_cpu(tx->comp_delivered);
-	dst->msdu_enqued = __le32_to_cpu(tx->msdu_enqued);
-	dst->mpdu_enqued = __le32_to_cpu(tx->mpdu_enqued);
-	dst->wmm_drop = __le32_to_cpu(tx->wmm_drop);
-	dst->local_enqued = __le32_to_cpu(tx->local_enqued);
-	dst->local_freed = __le32_to_cpu(tx->local_freed);
-	dst->hw_queued = __le32_to_cpu(tx->hw_queued);
-	dst->hw_reaped = __le32_to_cpu(tx->hw_reaped);
-	dst->underrun = __le32_to_cpu(tx->underrun);
-	dst->tx_abort = __le32_to_cpu(tx->tx_abort);
-	dst->mpdus_requed = __le32_to_cpu(tx->mpdus_requed);
-	dst->tx_ko = __le32_to_cpu(tx->tx_ko);
-	dst->data_rc = __le32_to_cpu(tx->data_rc);
-	dst->self_triggers = __le32_to_cpu(tx->self_triggers);
-	dst->sw_retry_failure = __le32_to_cpu(tx->sw_retry_failure);
-	dst->illgl_rate_phy_err = __le32_to_cpu(tx->illgl_rate_phy_err);
-	dst->pdev_cont_xretry = __le32_to_cpu(tx->pdev_cont_xretry);
-	dst->pdev_tx_timeout = __le32_to_cpu(tx->pdev_tx_timeout);
-	dst->pdev_resets = __le32_to_cpu(tx->pdev_resets);
-	dst->phy_underrun = __le32_to_cpu(tx->phy_underrun);
-	dst->txop_ovf = __le32_to_cpu(tx->txop_ovf);
-
-	dst->mid_ppdu_route_change = __le32_to_cpu(rx->mid_ppdu_route_change);
-	dst->status_rcvd = __le32_to_cpu(rx->status_rcvd);
-	dst->r0_frags = __le32_to_cpu(rx->r0_frags);
-	dst->r1_frags = __le32_to_cpu(rx->r1_frags);
-	dst->r2_frags = __le32_to_cpu(rx->r2_frags);
-	dst->r3_frags = __le32_to_cpu(rx->r3_frags);
-	dst->htt_msdus = __le32_to_cpu(rx->htt_msdus);
-	dst->htt_mpdus = __le32_to_cpu(rx->htt_mpdus);
-	dst->loc_msdus = __le32_to_cpu(rx->loc_msdus);
-	dst->loc_mpdus = __le32_to_cpu(rx->loc_mpdus);
-	dst->oversize_amsdu = __le32_to_cpu(rx->oversize_amsdu);
-	dst->phy_errs = __le32_to_cpu(rx->phy_errs);
-	dst->phy_err_drop = __le32_to_cpu(rx->phy_err_drop);
-	dst->mpdu_errs = __le32_to_cpu(rx->mpdu_errs);
+void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
+				   struct ath10k_fw_stats_pdev *dst)
+{
+	dst->comp_queued = __le32_to_cpu(src->comp_queued);
+	dst->comp_delivered = __le32_to_cpu(src->comp_delivered);
+	dst->msdu_enqued = __le32_to_cpu(src->msdu_enqued);
+	dst->mpdu_enqued = __le32_to_cpu(src->mpdu_enqued);
+	dst->wmm_drop = __le32_to_cpu(src->wmm_drop);
+	dst->local_enqued = __le32_to_cpu(src->local_enqued);
+	dst->local_freed = __le32_to_cpu(src->local_freed);
+	dst->hw_queued = __le32_to_cpu(src->hw_queued);
+	dst->hw_reaped = __le32_to_cpu(src->hw_reaped);
+	dst->underrun = __le32_to_cpu(src->underrun);
+	dst->tx_abort = __le32_to_cpu(src->tx_abort);
+	dst->mpdus_requed = __le32_to_cpu(src->mpdus_requed);
+	dst->tx_ko = __le32_to_cpu(src->tx_ko);
+	dst->data_rc = __le32_to_cpu(src->data_rc);
+	dst->self_triggers = __le32_to_cpu(src->self_triggers);
+	dst->sw_retry_failure = __le32_to_cpu(src->sw_retry_failure);
+	dst->illgl_rate_phy_err = __le32_to_cpu(src->illgl_rate_phy_err);
+	dst->pdev_cont_xretry = __le32_to_cpu(src->pdev_cont_xretry);
+	dst->pdev_tx_timeout = __le32_to_cpu(src->pdev_tx_timeout);
+	dst->pdev_resets = __le32_to_cpu(src->pdev_resets);
+	dst->phy_underrun = __le32_to_cpu(src->phy_underrun);
+	dst->txop_ovf = __le32_to_cpu(src->txop_ovf);
+}
+
+void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
+				   struct ath10k_fw_stats_pdev *dst)
+{
+	dst->mid_ppdu_route_change = __le32_to_cpu(src->mid_ppdu_route_change);
+	dst->status_rcvd = __le32_to_cpu(src->status_rcvd);
+	dst->r0_frags = __le32_to_cpu(src->r0_frags);
+	dst->r1_frags = __le32_to_cpu(src->r1_frags);
+	dst->r2_frags = __le32_to_cpu(src->r2_frags);
+	dst->r3_frags = __le32_to_cpu(src->r3_frags);
+	dst->htt_msdus = __le32_to_cpu(src->htt_msdus);
+	dst->htt_mpdus = __le32_to_cpu(src->htt_mpdus);
+	dst->loc_msdus = __le32_to_cpu(src->loc_msdus);
+	dst->loc_mpdus = __le32_to_cpu(src->loc_mpdus);
+	dst->oversize_amsdu = __le32_to_cpu(src->oversize_amsdu);
+	dst->phy_errs = __le32_to_cpu(src->phy_errs);
+	dst->phy_err_drop = __le32_to_cpu(src->phy_err_drop);
+	dst->mpdu_errs = __le32_to_cpu(src->mpdu_errs);
+}
+
+void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
+				      struct ath10k_fw_stats_pdev *dst)
+{
+	dst->ack_rx_bad = __le32_to_cpu(src->ack_rx_bad);
+	dst->rts_bad = __le32_to_cpu(src->rts_bad);
+	dst->rts_good = __le32_to_cpu(src->rts_good);
+	dst->fcs_bad = __le32_to_cpu(src->fcs_bad);
+	dst->no_beacons = __le32_to_cpu(src->no_beacons);
+	dst->mib_int_count = __le32_to_cpu(src->mib_int_count);
 }
 
 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
@@ -1768,7 +1784,10 @@ static int ath10k_wmi_main_op_pull_fw_stats(struct ath10k *ar,
 		if (!dst)
 			continue;
 
-		ath10k_wmi_pull_pdev_stats(src, dst);
+		ath10k_wmi_pull_pdev_stats_base(&src->base, dst);
+		ath10k_wmi_pull_pdev_stats_tx(&src->tx, dst);
+		ath10k_wmi_pull_pdev_stats_rx(&src->rx, dst);
+
 		list_add_tail(&dst->list, &stats->pdevs);
 	}
 
@@ -1820,14 +1839,10 @@ static int ath10k_wmi_10x_op_pull_fw_stats(struct ath10k *ar,
 		if (!dst)
 			continue;
 
-		ath10k_wmi_pull_pdev_stats(&src->old, dst);
-
-		dst->ack_rx_bad = __le32_to_cpu(src->ack_rx_bad);
-		dst->rts_bad = __le32_to_cpu(src->rts_bad);
-		dst->rts_good = __le32_to_cpu(src->rts_good);
-		dst->fcs_bad = __le32_to_cpu(src->fcs_bad);
-		dst->no_beacons = __le32_to_cpu(src->no_beacons);
-		dst->mib_int_count = __le32_to_cpu(src->mib_int_count);
+		ath10k_wmi_pull_pdev_stats_base(&src->base, dst);
+		ath10k_wmi_pull_pdev_stats_tx(&src->tx, dst);
+		ath10k_wmi_pull_pdev_stats_rx(&src->rx, dst);
+		ath10k_wmi_pull_pdev_stats_extra(&src->extra, dst);
 
 		list_add_tail(&dst->list, &stats->pdevs);
 	}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index bd7f29a..109ed62 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2946,7 +2946,7 @@ struct wmi_pdev_set_wmm_params_arg {
 	struct wmi_wmm_params_arg ac_vo;
 };
 
-struct wal_dbg_tx_stats {
+struct wmi_pdev_stats_tx {
 	/* Num HTT cookies queued to dispatch list */
 	__le32 comp_queued;
 
@@ -3016,7 +3016,7 @@ struct wal_dbg_tx_stats {
 	__le32 txop_ovf;
 } __packed;
 
-struct wal_dbg_rx_stats {
+struct wmi_pdev_stats_rx {
 	/* Cnts any change in ring routing mid-ppdu */
 	__le32 mid_ppdu_route_change;
 
@@ -3050,17 +3050,11 @@ struct wal_dbg_rx_stats {
 	__le32 mpdu_errs;
 } __packed;
 
-struct wal_dbg_peer_stats {
+struct wmi_pdev_stats_peer {
 	/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
 	__le32 dummy;
 } __packed;
 
-struct wal_dbg_stats {
-	struct wal_dbg_tx_stats tx;
-	struct wal_dbg_rx_stats rx;
-	struct wal_dbg_peer_stats peer;
-} __packed;
-
 enum wmi_stats_id {
 	WMI_REQUEST_PEER_STAT	= 0x01,
 	WMI_REQUEST_AP_STAT	= 0x02
@@ -3131,19 +3125,24 @@ struct wmi_stats_event {
  * PDEV statistics
  * TODO: add all PDEV stats here
  */
+struct wmi_pdev_stats_base {
+	__le32 chan_nf;
+	__le32 tx_frame_count;
+	__le32 rx_frame_count;
+	__le32 rx_clear_count;
+	__le32 cycle_count;
+	__le32 phy_err_count;
+	__le32 chan_tx_pwr;
+} __packed;
+
 struct wmi_pdev_stats {
-	__le32 chan_nf;        /* Channel noise floor */
-	__le32 tx_frame_count; /* TX frame count */
-	__le32 rx_frame_count; /* RX frame count */
-	__le32 rx_clear_count; /* rx clear count */
-	__le32 cycle_count;    /* cycle count */
-	__le32 phy_err_count;  /* Phy error count */
-	__le32 chan_tx_pwr;    /* channel tx power */
-	struct wal_dbg_stats wal; /* WAL dbg stats */
+	struct wmi_pdev_stats_base base;
+	struct wmi_pdev_stats_tx tx;
+	struct wmi_pdev_stats_rx rx;
+	struct wmi_pdev_stats_peer peer;
 } __packed;
 
-struct wmi_10x_pdev_stats {
-	struct wmi_pdev_stats old;
+struct wmi_pdev_stats_extra {
 	__le32 ack_rx_bad;
 	__le32 rts_bad;
 	__le32 rts_good;
@@ -3152,6 +3151,14 @@ struct wmi_10x_pdev_stats {
 	__le32 mib_int_count;
 } __packed;
 
+struct wmi_10x_pdev_stats {
+	struct wmi_pdev_stats_base base;
+	struct wmi_pdev_stats_tx tx;
+	struct wmi_pdev_stats_rx rx;
+	struct wmi_pdev_stats_peer peer;
+	struct wmi_pdev_stats_extra extra;
+} __packed;
+
 /*
  * VDEV statistics
  * TODO: add all VDEV stats here
@@ -4772,8 +4779,14 @@ int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
 			       u32 cmd_id);
 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
 
-void ath10k_wmi_pull_pdev_stats(const struct wmi_pdev_stats *src,
-				struct ath10k_fw_stats_pdev *dst);
+void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
+				     struct ath10k_fw_stats_pdev *dst);
+void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
+				   struct ath10k_fw_stats_pdev *dst);
+void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
+				   struct ath10k_fw_stats_pdev *dst);
+void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
+				      struct ath10k_fw_stats_pdev *dst);
 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
 				struct ath10k_fw_stats_peer *dst);
 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
-- 
cgit v1.1


From 20de2229c634382777eb3b8fc54a34be9669ff8a Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:49 +0200
Subject: ath10k: fix 10.2 fw stats parsing

Both 10.2 firmware binaries 10.2-00082-4 and
10.2.4.20 have introduced ABI changes to fw_stats
each. This caused fw_stats to output wrong data.

Define new structures and use them to parse the
statistics correctly.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 162 +++++++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/wmi.h |  52 +++++++++++
 2 files changed, 212 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index ce095da..fb1e2d1 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -1871,6 +1871,164 @@ static int ath10k_wmi_10x_op_pull_fw_stats(struct ath10k *ar,
 	return 0;
 }
 
+static int ath10k_wmi_10_2_op_pull_fw_stats(struct ath10k *ar,
+					    struct sk_buff *skb,
+					    struct ath10k_fw_stats *stats)
+{
+	const struct wmi_10_2_stats_event *ev = (void *)skb->data;
+	u32 num_pdev_stats;
+	u32 num_pdev_ext_stats;
+	u32 num_vdev_stats;
+	u32 num_peer_stats;
+	int i;
+
+	if (!skb_pull(skb, sizeof(*ev)))
+		return -EPROTO;
+
+	num_pdev_stats = __le32_to_cpu(ev->num_pdev_stats);
+	num_pdev_ext_stats = __le32_to_cpu(ev->num_pdev_ext_stats);
+	num_vdev_stats = __le32_to_cpu(ev->num_vdev_stats);
+	num_peer_stats = __le32_to_cpu(ev->num_peer_stats);
+
+	for (i = 0; i < num_pdev_stats; i++) {
+		const struct wmi_10_2_pdev_stats *src;
+		struct ath10k_fw_stats_pdev *dst;
+
+		src = (void *)skb->data;
+		if (!skb_pull(skb, sizeof(*src)))
+			return -EPROTO;
+
+		dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
+		if (!dst)
+			continue;
+
+		ath10k_wmi_pull_pdev_stats_base(&src->base, dst);
+		ath10k_wmi_pull_pdev_stats_tx(&src->tx, dst);
+		ath10k_wmi_pull_pdev_stats_rx(&src->rx, dst);
+		ath10k_wmi_pull_pdev_stats_extra(&src->extra, dst);
+		/* FIXME: expose 10.2 specific values */
+
+		list_add_tail(&dst->list, &stats->pdevs);
+	}
+
+	for (i = 0; i < num_pdev_ext_stats; i++) {
+		const struct wmi_10_2_pdev_ext_stats *src;
+
+		src = (void *)skb->data;
+		if (!skb_pull(skb, sizeof(*src)))
+			return -EPROTO;
+
+		/* FIXME: expose values to userspace
+		 *
+		 * Note: Even though this loop seems to do nothing it is
+		 * required to parse following sub-structures properly.
+		 */
+	}
+
+	/* fw doesn't implement vdev stats */
+
+	for (i = 0; i < num_peer_stats; i++) {
+		const struct wmi_10_2_peer_stats *src;
+		struct ath10k_fw_stats_peer *dst;
+
+		src = (void *)skb->data;
+		if (!skb_pull(skb, sizeof(*src)))
+			return -EPROTO;
+
+		dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
+		if (!dst)
+			continue;
+
+		ath10k_wmi_pull_peer_stats(&src->old, dst);
+
+		dst->peer_rx_rate = __le32_to_cpu(src->peer_rx_rate);
+		/* FIXME: expose 10.2 specific values */
+
+		list_add_tail(&dst->list, &stats->peers);
+	}
+
+	return 0;
+}
+
+static int ath10k_wmi_10_2_4_op_pull_fw_stats(struct ath10k *ar,
+					      struct sk_buff *skb,
+					      struct ath10k_fw_stats *stats)
+{
+	const struct wmi_10_2_stats_event *ev = (void *)skb->data;
+	u32 num_pdev_stats;
+	u32 num_pdev_ext_stats;
+	u32 num_vdev_stats;
+	u32 num_peer_stats;
+	int i;
+
+	if (!skb_pull(skb, sizeof(*ev)))
+		return -EPROTO;
+
+	num_pdev_stats = __le32_to_cpu(ev->num_pdev_stats);
+	num_pdev_ext_stats = __le32_to_cpu(ev->num_pdev_ext_stats);
+	num_vdev_stats = __le32_to_cpu(ev->num_vdev_stats);
+	num_peer_stats = __le32_to_cpu(ev->num_peer_stats);
+
+	for (i = 0; i < num_pdev_stats; i++) {
+		const struct wmi_10_2_pdev_stats *src;
+		struct ath10k_fw_stats_pdev *dst;
+
+		src = (void *)skb->data;
+		if (!skb_pull(skb, sizeof(*src)))
+			return -EPROTO;
+
+		dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
+		if (!dst)
+			continue;
+
+		ath10k_wmi_pull_pdev_stats_base(&src->base, dst);
+		ath10k_wmi_pull_pdev_stats_tx(&src->tx, dst);
+		ath10k_wmi_pull_pdev_stats_rx(&src->rx, dst);
+		ath10k_wmi_pull_pdev_stats_extra(&src->extra, dst);
+		/* FIXME: expose 10.2 specific values */
+
+		list_add_tail(&dst->list, &stats->pdevs);
+	}
+
+	for (i = 0; i < num_pdev_ext_stats; i++) {
+		const struct wmi_10_2_pdev_ext_stats *src;
+
+		src = (void *)skb->data;
+		if (!skb_pull(skb, sizeof(*src)))
+			return -EPROTO;
+
+		/* FIXME: expose values to userspace
+		 *
+		 * Note: Even though this loop seems to do nothing it is
+		 * required to parse following sub-structures properly.
+		 */
+	}
+
+	/* fw doesn't implement vdev stats */
+
+	for (i = 0; i < num_peer_stats; i++) {
+		const struct wmi_10_2_4_peer_stats *src;
+		struct ath10k_fw_stats_peer *dst;
+
+		src = (void *)skb->data;
+		if (!skb_pull(skb, sizeof(*src)))
+			return -EPROTO;
+
+		dst = kzalloc(sizeof(*dst), GFP_ATOMIC);
+		if (!dst)
+			continue;
+
+		ath10k_wmi_pull_peer_stats(&src->common.old, dst);
+
+		dst->peer_rx_rate = __le32_to_cpu(src->common.peer_rx_rate);
+		/* FIXME: expose 10.2 specific values */
+
+		list_add_tail(&dst->list, &stats->peers);
+	}
+
+	return 0;
+}
+
 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb)
 {
 	ath10k_dbg(ar, ATH10K_DBG_WMI, "WMI_UPDATE_STATS_EVENTID\n");
@@ -5121,6 +5279,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 
 static const struct wmi_ops wmi_10_2_ops = {
 	.rx = ath10k_wmi_10_2_op_rx,
+	.pull_fw_stats = ath10k_wmi_10_2_op_pull_fw_stats,
 	.gen_init = ath10k_wmi_10_2_op_gen_init,
 	.gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
 	/* .gen_pdev_get_temperature not implemented */
@@ -5128,7 +5287,6 @@ static const struct wmi_ops wmi_10_2_ops = {
 	/* shared with 10.1 */
 	.map_svc = wmi_10x_svc_map,
 	.pull_svc_rdy = ath10k_wmi_10x_op_pull_svc_rdy_ev,
-	.pull_fw_stats = ath10k_wmi_10x_op_pull_fw_stats,
 	.gen_pdev_set_rd = ath10k_wmi_10x_op_gen_pdev_set_rd,
 	.gen_start_scan = ath10k_wmi_10x_op_gen_start_scan,
 
@@ -5180,6 +5338,7 @@ static const struct wmi_ops wmi_10_2_ops = {
 
 static const struct wmi_ops wmi_10_2_4_ops = {
 	.rx = ath10k_wmi_10_2_op_rx,
+	.pull_fw_stats = ath10k_wmi_10_2_4_op_pull_fw_stats,
 	.gen_init = ath10k_wmi_10_2_op_gen_init,
 	.gen_peer_assoc = ath10k_wmi_10_2_op_gen_peer_assoc,
 	.gen_pdev_get_temperature = ath10k_wmi_10_2_op_gen_pdev_get_temperature,
@@ -5187,7 +5346,6 @@ static const struct wmi_ops wmi_10_2_4_ops = {
 	/* shared with 10.1 */
 	.map_svc = wmi_10x_svc_map,
 	.pull_svc_rdy = ath10k_wmi_10x_op_pull_svc_rdy_ev,
-	.pull_fw_stats = ath10k_wmi_10x_op_pull_fw_stats,
 	.gen_pdev_set_rd = ath10k_wmi_10x_op_gen_pdev_set_rd,
 	.gen_start_scan = ath10k_wmi_10x_op_gen_start_scan,
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 109ed62..0514b1a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -3121,6 +3121,16 @@ struct wmi_stats_event {
 	u8 data[0];
 } __packed;
 
+struct wmi_10_2_stats_event {
+	__le32 stats_id; /* %WMI_REQUEST_ */
+	__le32 num_pdev_stats;
+	__le32 num_pdev_ext_stats;
+	__le32 num_vdev_stats;
+	__le32 num_peer_stats;
+	__le32 num_bcnflt_stats;
+	u8 data[0];
+} __packed;
+
 /*
  * PDEV statistics
  * TODO: add all PDEV stats here
@@ -3159,6 +3169,22 @@ struct wmi_10x_pdev_stats {
 	struct wmi_pdev_stats_extra extra;
 } __packed;
 
+struct wmi_pdev_stats_mem {
+	__le32 dram_free;
+	__le32 iram_free;
+} __packed;
+
+struct wmi_10_2_pdev_stats {
+	struct wmi_pdev_stats_base base;
+	struct wmi_pdev_stats_tx tx;
+	__le32 mc_drop;
+	struct wmi_pdev_stats_rx rx;
+	__le32 pdev_rx_timeout;
+	struct wmi_pdev_stats_mem mem;
+	struct wmi_pdev_stats_peer peer;
+	struct wmi_pdev_stats_extra extra;
+} __packed;
+
 /*
  * VDEV statistics
  * TODO: add all VDEV stats here
@@ -3182,6 +3208,32 @@ struct wmi_10x_peer_stats {
 	__le32 peer_rx_rate;
 } __packed;
 
+struct wmi_10_2_peer_stats {
+	struct wmi_peer_stats old;
+	__le32 peer_rx_rate;
+	__le32 current_per;
+	__le32 retries;
+	__le32 tx_rate_count;
+	__le32 max_4ms_frame_len;
+	__le32 total_sub_frames;
+	__le32 tx_bytes;
+	__le32 num_pkt_loss_overflow[4];
+	__le32 num_pkt_loss_excess_retry[4];
+} __packed;
+
+struct wmi_10_2_4_peer_stats {
+	struct wmi_10_2_peer_stats common;
+	__le32 unknown_value; /* FIXME: what is this word? */
+} __packed;
+
+struct wmi_10_2_pdev_ext_stats {
+	__le32 rx_rssi_comb;
+	__le32 rx_rssi[4];
+	__le32 rx_mcs[10];
+	__le32 tx_mcs[10];
+	__le32 ack_rssi;
+} __packed;
+
 struct wmi_vdev_create_cmd {
 	__le32 vdev_id;
 	__le32 vdev_type;
-- 
cgit v1.1


From 89d6d83565e9a18ae77f4542348d8a34c264c9b1 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:51 +0200
Subject: ath10k: use idr api for msdu_ids

HTT Tx protocol uses arbitrary host assigned ids
too associate with MSDUs when delivering
completions.

Instead of rolling out own id generation scheme
use the tools provided in kernel.

This should have little to no effect on
performance.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt.h    |  7 ++-
 drivers/net/wireless/ath/ath10k/htt_tx.c | 78 ++++++++++----------------------
 drivers/net/wireless/ath/ath10k/txrx.c   |  9 +++-
 3 files changed, 35 insertions(+), 59 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index d1f6eb2..874bf44 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -1328,12 +1328,11 @@ struct ath10k_htt {
 
 	unsigned int prefetch_len;
 
-	/* Protects access to %pending_tx, %used_msdu_ids */
+	/* Protects access to pending_tx, num_pending_tx */
 	spinlock_t tx_lock;
 	int max_num_pending_tx;
 	int num_pending_tx;
-	struct sk_buff **pending_tx;
-	unsigned long *used_msdu_ids; /* bitmap */
+	struct idr pending_tx;
 	wait_queue_head_t empty_tx_wq;
 	struct dma_pool *tx_pool;
 
@@ -1424,7 +1423,7 @@ int ath10k_htt_h2t_aggr_cfg_msg(struct ath10k_htt *htt,
 				u8 max_subfrms_amsdu);
 
 void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt);
-int ath10k_htt_tx_alloc_msdu_id(struct ath10k_htt *htt);
+int ath10k_htt_tx_alloc_msdu_id(struct ath10k_htt *htt, struct sk_buff *skb);
 void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id);
 int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *);
 int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *);
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 5c64139..2a8667e 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -56,21 +56,18 @@ exit:
 	return ret;
 }
 
-int ath10k_htt_tx_alloc_msdu_id(struct ath10k_htt *htt)
+int ath10k_htt_tx_alloc_msdu_id(struct ath10k_htt *htt, struct sk_buff *skb)
 {
 	struct ath10k *ar = htt->ar;
-	int msdu_id;
+	int ret;
 
 	lockdep_assert_held(&htt->tx_lock);
 
-	msdu_id = find_first_zero_bit(htt->used_msdu_ids,
-				      htt->max_num_pending_tx);
-	if (msdu_id == htt->max_num_pending_tx)
-		return -ENOBUFS;
+	ret = idr_alloc(&htt->pending_tx, skb, 0, 0x10000, GFP_ATOMIC);
+
+	ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx alloc msdu_id %d\n", ret);
 
-	ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx alloc msdu_id %d\n", msdu_id);
-	__set_bit(msdu_id, htt->used_msdu_ids);
-	return msdu_id;
+	return ret;
 }
 
 void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id)
@@ -79,74 +76,53 @@ void ath10k_htt_tx_free_msdu_id(struct ath10k_htt *htt, u16 msdu_id)
 
 	lockdep_assert_held(&htt->tx_lock);
 
-	if (!test_bit(msdu_id, htt->used_msdu_ids))
-		ath10k_warn(ar, "trying to free unallocated msdu_id %d\n",
-			    msdu_id);
-
 	ath10k_dbg(ar, ATH10K_DBG_HTT, "htt tx free msdu_id %hu\n", msdu_id);
-	__clear_bit(msdu_id, htt->used_msdu_ids);
+
+	idr_remove(&htt->pending_tx, msdu_id);
 }
 
 int ath10k_htt_tx_alloc(struct ath10k_htt *htt)
 {
 	struct ath10k *ar = htt->ar;
 
-	spin_lock_init(&htt->tx_lock);
-
 	ath10k_dbg(ar, ATH10K_DBG_BOOT, "htt tx max num pending tx %d\n",
 		   htt->max_num_pending_tx);
 
-	htt->pending_tx = kzalloc(sizeof(*htt->pending_tx) *
-				  htt->max_num_pending_tx, GFP_KERNEL);
-	if (!htt->pending_tx)
-		return -ENOMEM;
-
-	htt->used_msdu_ids = kzalloc(sizeof(unsigned long) *
-				     BITS_TO_LONGS(htt->max_num_pending_tx),
-				     GFP_KERNEL);
-	if (!htt->used_msdu_ids) {
-		kfree(htt->pending_tx);
-		return -ENOMEM;
-	}
+	spin_lock_init(&htt->tx_lock);
+	idr_init(&htt->pending_tx);
 
 	htt->tx_pool = dma_pool_create("ath10k htt tx pool", htt->ar->dev,
 				       sizeof(struct ath10k_htt_txbuf), 4, 0);
 	if (!htt->tx_pool) {
-		kfree(htt->used_msdu_ids);
-		kfree(htt->pending_tx);
+		idr_destroy(&htt->pending_tx);
 		return -ENOMEM;
 	}
 
 	return 0;
 }
 
-static void ath10k_htt_tx_free_pending(struct ath10k_htt *htt)
+static int ath10k_htt_tx_clean_up_pending(int msdu_id, void *skb, void *ctx)
 {
-	struct ath10k *ar = htt->ar;
+	struct ath10k *ar = ctx;
+	struct ath10k_htt *htt = &ar->htt;
 	struct htt_tx_done tx_done = {0};
-	int msdu_id;
-
-	spin_lock_bh(&htt->tx_lock);
-	for (msdu_id = 0; msdu_id < htt->max_num_pending_tx; msdu_id++) {
-		if (!test_bit(msdu_id, htt->used_msdu_ids))
-			continue;
 
-		ath10k_dbg(ar, ATH10K_DBG_HTT, "force cleanup msdu_id %hu\n",
-			   msdu_id);
+	ath10k_dbg(ar, ATH10K_DBG_HTT, "force cleanup msdu_id %hu\n", msdu_id);
 
-		tx_done.discard = 1;
-		tx_done.msdu_id = msdu_id;
+	tx_done.discard = 1;
+	tx_done.msdu_id = msdu_id;
 
-		ath10k_txrx_tx_unref(htt, &tx_done);
-	}
+	spin_lock_bh(&htt->tx_lock);
+	ath10k_txrx_tx_unref(htt, &tx_done);
 	spin_unlock_bh(&htt->tx_lock);
+
+	return 0;
 }
 
 void ath10k_htt_tx_free(struct ath10k_htt *htt)
 {
-	ath10k_htt_tx_free_pending(htt);
-	kfree(htt->pending_tx);
-	kfree(htt->used_msdu_ids);
+	idr_for_each(&htt->pending_tx, ath10k_htt_tx_clean_up_pending, htt->ar);
+	idr_destroy(&htt->pending_tx);
 	dma_pool_destroy(htt->tx_pool);
 }
 
@@ -378,13 +354,12 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	len += sizeof(cmd->mgmt_tx);
 
 	spin_lock_bh(&htt->tx_lock);
-	res = ath10k_htt_tx_alloc_msdu_id(htt);
+	res = ath10k_htt_tx_alloc_msdu_id(htt, msdu);
 	if (res < 0) {
 		spin_unlock_bh(&htt->tx_lock);
 		goto err_tx_dec;
 	}
 	msdu_id = res;
-	htt->pending_tx[msdu_id] = msdu;
 	spin_unlock_bh(&htt->tx_lock);
 
 	txdesc = ath10k_htc_alloc_skb(ar, len);
@@ -423,7 +398,6 @@ err_free_txdesc:
 	dev_kfree_skb_any(txdesc);
 err_free_msdu_id:
 	spin_lock_bh(&htt->tx_lock);
-	htt->pending_tx[msdu_id] = NULL;
 	ath10k_htt_tx_free_msdu_id(htt, msdu_id);
 	spin_unlock_bh(&htt->tx_lock);
 err_tx_dec:
@@ -455,13 +429,12 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 		goto err;
 
 	spin_lock_bh(&htt->tx_lock);
-	res = ath10k_htt_tx_alloc_msdu_id(htt);
+	res = ath10k_htt_tx_alloc_msdu_id(htt, msdu);
 	if (res < 0) {
 		spin_unlock_bh(&htt->tx_lock);
 		goto err_tx_dec;
 	}
 	msdu_id = res;
-	htt->pending_tx[msdu_id] = msdu;
 	spin_unlock_bh(&htt->tx_lock);
 
 	prefetch_len = min(htt->prefetch_len, msdu->len);
@@ -595,7 +568,6 @@ err_free_txbuf:
 		      skb_cb->htt.txbuf_paddr);
 err_free_msdu_id:
 	spin_lock_bh(&htt->tx_lock);
-	htt->pending_tx[msdu_id] = NULL;
 	ath10k_htt_tx_free_msdu_id(htt, msdu_id);
 	spin_unlock_bh(&htt->tx_lock);
 err_tx_dec:
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 7579de8..3f00cec 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -64,7 +64,13 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 		return;
 	}
 
-	msdu = htt->pending_tx[tx_done->msdu_id];
+	msdu = idr_find(&htt->pending_tx, tx_done->msdu_id);
+	if (!msdu) {
+		ath10k_warn(ar, "received tx completion for invalid msdu_id: %d\n",
+			    tx_done->msdu_id);
+		return;
+	}
+
 	skb_cb = ATH10K_SKB_CB(msdu);
 
 	dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
@@ -95,7 +101,6 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	/* we do not own the msdu anymore */
 
 exit:
-	htt->pending_tx[tx_done->msdu_id] = NULL;
 	ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
 	__ath10k_htt_tx_dec_pending(htt);
 	if (htt->num_pending_tx == 0)
-- 
cgit v1.1


From ba2479fe65025bc48d79f86bce74567016632c3a Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:51 +0200
Subject: ath10k: fix dtim period with beacon templates

Firmware supporting beacon templates (i.e. wmi-tlv
for qca6174) doesn't implicitly take dtim period
from the template. Instead it requires vdev param
to be set accordingly.

This fixes dtim period being stuck at 3.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 9524bc5..99af537 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3435,7 +3435,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
 				    arvif->vdev_id, ret);
 	}
 
-	if (changed & BSS_CHANGED_BEACON_INFO) {
+	if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) {
 		arvif->dtim_period = info->dtim_period;
 
 		ath10k_dbg(ar, ATH10K_DBG_MAC,
-- 
cgit v1.1


From bf0a26d31ba141b7f41976392ea393ce90ca64e3 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:51 +0200
Subject: ath10k: fix nullfunc workaround

The workaround couldn't work correctly because the
802.11 header wasn't properly stripped of QoS Data
bit so it wasn't recognized in the later parts of
tx path as NullFunc frame and ended up in HTT Tx
instead of HTT Mgmt Tx.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 99af537..5331350 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -2145,6 +2145,7 @@ static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * used only for CQM purposes (e.g. hostapd station keepalive ping) so
 	 * it is safe to downgrade to NullFunc.
 	 */
+	hdr = (void *)skb->data;
 	if (ieee80211_is_qos_nullfunc(hdr->frame_control)) {
 		hdr->frame_control &= ~__cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
 		cb->htt.tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST;
-- 
cgit v1.1


From 0c7e477c666e767f231fafe08e117669c64e5e14 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Sat, 24 Jan 2015 12:14:52 +0200
Subject: ath10k: implement uapsd autotrigger command

New wmi-tlv firmware for qca6174 has u-UAPSD
autotrigger service. If it is enabled firmware
generates trigger frames automatically as
configured.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 25 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 73 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h     | 24 ++++++++++
 3 files changed, 122 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 0dd49a7..80bd28a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -137,6 +137,10 @@ struct wmi_ops {
 					struct sk_buff *bcn);
 	struct sk_buff *(*gen_p2p_go_bcn_ie)(struct ath10k *ar, u32 vdev_id,
 					     const u8 *p2p_ie);
+	struct sk_buff *(*gen_vdev_sta_uapsd)(struct ath10k *ar, u32 vdev_id,
+					      const u8 peer_addr[ETH_ALEN],
+					      const struct wmi_sta_uapsd_auto_trig_arg *args,
+					      u32 num_ac);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -576,6 +580,27 @@ ath10k_wmi_vdev_spectral_enable(struct ath10k *ar, u32 vdev_id, u32 trigger,
 }
 
 static inline int
+ath10k_wmi_vdev_sta_uapsd(struct ath10k *ar, u32 vdev_id,
+			  const u8 peer_addr[ETH_ALEN],
+			  const struct wmi_sta_uapsd_auto_trig_arg *args,
+			  u32 num_ac)
+{
+	struct sk_buff *skb;
+	u32 cmd_id;
+
+	if (!ar->wmi.ops->gen_vdev_sta_uapsd)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_vdev_sta_uapsd(ar, vdev_id, peer_addr, args,
+					      num_ac);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	cmd_id = ar->wmi.cmd->sta_uapsd_auto_trig_cmdid;
+	return ath10k_wmi_cmd_send(ar, skb, cmd_id);
+}
+
+static inline int
 ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
 		       const u8 peer_addr[ETH_ALEN])
 {
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 35f5191..d3cf91dc 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1512,6 +1512,78 @@ ath10k_wmi_tlv_op_gen_vdev_install_key(struct ath10k *ar,
 	return skb;
 }
 
+static void *ath10k_wmi_tlv_put_uapsd_ac(struct ath10k *ar, void *ptr,
+					 const struct wmi_sta_uapsd_auto_trig_arg *arg)
+{
+	struct wmi_sta_uapsd_auto_trig_param *ac;
+	struct wmi_tlv *tlv;
+
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_STA_UAPSD_AUTO_TRIG_PARAM);
+	tlv->len = __cpu_to_le16(sizeof(*ac));
+	ac = (void *)tlv->value;
+
+	ac->wmm_ac = __cpu_to_le32(arg->wmm_ac);
+	ac->user_priority = __cpu_to_le32(arg->user_priority);
+	ac->service_interval = __cpu_to_le32(arg->service_interval);
+	ac->suspend_interval = __cpu_to_le32(arg->suspend_interval);
+	ac->delay_interval = __cpu_to_le32(arg->delay_interval);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi tlv vdev sta uapsd auto trigger ac %d prio %d svc int %d susp int %d delay int %d\n",
+		   ac->wmm_ac, ac->user_priority, ac->service_interval,
+		   ac->suspend_interval, ac->delay_interval);
+
+	return ptr + sizeof(*tlv) + sizeof(*ac);
+}
+
+static struct sk_buff *
+ath10k_wmi_tlv_op_gen_vdev_sta_uapsd(struct ath10k *ar, u32 vdev_id,
+				     const u8 peer_addr[ETH_ALEN],
+				     const struct wmi_sta_uapsd_auto_trig_arg *args,
+				     u32 num_ac)
+{
+	struct wmi_sta_uapsd_auto_trig_cmd_fixed_param *cmd;
+	struct wmi_sta_uapsd_auto_trig_param *ac;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	size_t len;
+	size_t ac_tlv_len;
+	void *ptr;
+	int i;
+
+	ac_tlv_len = num_ac * (sizeof(*tlv) + sizeof(*ac));
+	len = sizeof(*tlv) + sizeof(*cmd) +
+	      sizeof(*tlv) + ac_tlv_len;
+	skb = ath10k_wmi_alloc_skb(ar, len);
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	ptr = (void *)skb->data;
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_STA_UAPSD_AUTO_TRIG_CMD);
+	tlv->len = __cpu_to_le16(sizeof(*cmd));
+	cmd = (void *)tlv->value;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	cmd->num_ac = __cpu_to_le32(num_ac);
+	ether_addr_copy(cmd->peer_macaddr.addr, peer_addr);
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*cmd);
+
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_ARRAY_STRUCT);
+	tlv->len = __cpu_to_le16(ac_tlv_len);
+	ac = (void *)tlv->value;
+
+	ptr += sizeof(*tlv);
+	for (i = 0; i < num_ac; i++)
+		ptr = ath10k_wmi_tlv_put_uapsd_ac(ar, ptr, &args[i]);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev sta uapsd auto trigger\n");
+	return skb;
+}
+
 static struct sk_buff *
 ath10k_wmi_tlv_op_gen_peer_create(struct ath10k *ar, u32 vdev_id,
 				  const u8 peer_addr[ETH_ALEN])
@@ -2523,6 +2595,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_bcn_tmpl = ath10k_wmi_tlv_op_gen_bcn_tmpl,
 	.gen_prb_tmpl = ath10k_wmi_tlv_op_gen_prb_tmpl,
 	.gen_p2p_go_bcn_ie = ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie,
+	.gen_vdev_sta_uapsd = ath10k_wmi_tlv_op_gen_vdev_sta_uapsd,
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 0514b1a..34d8c44 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4119,6 +4119,30 @@ enum wmi_sta_ps_param_uapsd {
 	WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
 };
 
+#define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
+
+struct wmi_sta_uapsd_auto_trig_param {
+	__le32 wmm_ac;
+	__le32 user_priority;
+	__le32 service_interval;
+	__le32 suspend_interval;
+	__le32 delay_interval;
+};
+
+struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
+	__le32 vdev_id;
+	struct wmi_mac_addr peer_macaddr;
+	__le32 num_ac;
+};
+
+struct wmi_sta_uapsd_auto_trig_arg {
+	u32 wmm_ac;
+	u32 user_priority;
+	u32 service_interval;
+	u32 suspend_interval;
+	u32 delay_interval;
+};
+
 enum wmi_sta_powersave_param {
 	/*
 	 * Controls how frames are retrievd from AP while STA is sleeping
-- 
cgit v1.1


From b0e561549316f520a80dc15dd341923b57bd4500 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:52 +0200
Subject: ath10k: disable uapsd autotrigger

Only userspace can make an educated decision when
a trigger frame is required so make sure the
autotrigger service is disabled.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 5331350..e3a3bbd 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3988,6 +3988,8 @@ static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
 				u16 ac, bool enable)
 {
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	struct wmi_sta_uapsd_auto_trig_arg arg = {};
+	u32 prio = 0, acc = 0;
 	u32 value = 0;
 	int ret = 0;
 
@@ -4000,18 +4002,26 @@ static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
 	case IEEE80211_AC_VO:
 		value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN |
 			WMI_STA_PS_UAPSD_AC3_TRIGGER_EN;
+		prio = 7;
+		acc = 3;
 		break;
 	case IEEE80211_AC_VI:
 		value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN |
 			WMI_STA_PS_UAPSD_AC2_TRIGGER_EN;
+		prio = 5;
+		acc = 2;
 		break;
 	case IEEE80211_AC_BE:
 		value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN |
 			WMI_STA_PS_UAPSD_AC1_TRIGGER_EN;
+		prio = 2;
+		acc = 1;
 		break;
 	case IEEE80211_AC_BK:
 		value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN |
 			WMI_STA_PS_UAPSD_AC0_TRIGGER_EN;
+		prio = 0;
+		acc = 0;
 		break;
 	}
 
@@ -4053,6 +4063,29 @@ static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif,
 		return ret;
 	}
 
+	if (test_bit(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, ar->wmi.svc_map) ||
+	    test_bit(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, ar->wmi.svc_map)) {
+		/* Only userspace can make an educated decision when to send
+		 * trigger frame. The following effectively disables u-UAPSD
+		 * autotrigger in firmware (which is enabled by default
+		 * provided the autotrigger service is available).
+		 */
+
+		arg.wmm_ac = acc;
+		arg.user_priority = prio;
+		arg.service_interval = 0;
+		arg.suspend_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;
+		arg.delay_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC;
+
+		ret = ath10k_wmi_vdev_sta_uapsd(ar, arvif->vdev_id,
+						arvif->bssid, &arg, 1);
+		if (ret) {
+			ath10k_warn(ar, "failed to set uapsd auto trigger %d\n",
+				    ret);
+			return ret;
+		}
+	}
+
 exit:
 	return ret;
 }
-- 
cgit v1.1


From 6f3b7ff4e309031e15402b71891b57eb14951b7a Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Sat, 24 Jan 2015 12:14:52 +0200
Subject: ath10k: disable irqs after fw crash

It makes little sense to keep handling irqs if fw
is dead.

This prevents multiple fw register dumps upon
crash on some devices (seen on QCA6174).

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index a31746d..e6972b0 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2126,6 +2126,7 @@ static void ath10k_msi_err_tasklet(unsigned long data)
 		return;
 	}
 
+	ath10k_pci_irq_disable(ar);
 	ath10k_pci_fw_crashed_clear(ar);
 	ath10k_pci_fw_crashed_dump(ar);
 }
@@ -2195,6 +2196,7 @@ static void ath10k_pci_tasklet(unsigned long data)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
 	if (ath10k_pci_has_fw_crashed(ar)) {
+		ath10k_pci_irq_disable(ar);
 		ath10k_pci_fw_crashed_clear(ar);
 		ath10k_pci_fw_crashed_dump(ar);
 		return;
-- 
cgit v1.1


From e4e82e9af8f02f9f3e19d240170c8c4b68f28bd4 Mon Sep 17 00:00:00 2001
From: Marek Kwaczynski <marek.kwaczynski@tieto.com>
Date: Sat, 24 Jan 2015 12:14:53 +0200
Subject: ath10k: remove sw encryption for pmf

Software encryption was never necessary.
Tested with fw 636 and fw 10.x.

Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e3a3bbd..02e2bfc 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -58,10 +58,7 @@ static int ath10k_send_key(struct ath10k_vif *arvif,
 	switch (key->cipher) {
 	case WLAN_CIPHER_SUITE_CCMP:
 		arg.key_cipher = WMI_CIPHER_AES_CCM;
-		if (arvif->vdev_type == WMI_VDEV_TYPE_AP)
-			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV_MGMT;
-		else
-			key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV_MGMT;
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
 		arg.key_cipher = WMI_CIPHER_TKIP;
-- 
cgit v1.1


From eebc67fef3eed8c768b9c046273dff6467b22cf4 Mon Sep 17 00:00:00 2001
From: Marek Kwaczynski <marek.kwaczynski@tieto.com>
Date: Sat, 24 Jan 2015 12:14:53 +0200
Subject: ath10k: fix pmf for wmi-tlv on qca6174

New wmi-tlv firmware uses HTT 3.0 protocol which
uses TX_FRM command for management frames (instead
of a dedicated command). To support PMF it is
necessary to provide explicit tailroom.

Signed-off-by: Marek Kwaczynski <marek.kwaczynski@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index 2a8667e..c1961e7 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -454,6 +454,12 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 	}
 	skb_cb->htt.txbuf_paddr = paddr;
 
+	if ((ieee80211_is_action(hdr->frame_control) ||
+	     ieee80211_is_deauth(hdr->frame_control) ||
+	     ieee80211_is_disassoc(hdr->frame_control)) &&
+	     ieee80211_has_protected(hdr->frame_control))
+		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
 				       DMA_TO_DEVICE);
 	res = dma_mapping_error(dev, skb_cb->paddr);
-- 
cgit v1.1


From ea2325b89d16c0803714d48e28b116aec2ef5026 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Mon, 19 Jan 2015 15:54:36 +0530
Subject: mwifiex: set netif carrier off in ndo_open

This patch adds fix to set carrier state off during ndo_open.
Carrier should be set to ON when device is ready to send data.
In case of station/adhoc interface device is able to transfer
data after successful association/join operation.
For AP this would be after bss_active event.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index d235adb..9836df0 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -562,7 +562,8 @@ static int mwifiex_init_hw_fw(struct mwifiex_adapter *adapter)
 static int
 mwifiex_open(struct net_device *dev)
 {
-	netif_tx_start_all_queues(dev);
+	netif_carrier_off(dev);
+
 	return 0;
 }
 
-- 
cgit v1.1


From 33511b157bbcebaef853cc1811992b664a2e5862 Mon Sep 17 00:00:00 2001
From: Taehee Yoo <ap420073@gmail.com>
Date: Wed, 21 Jan 2015 16:58:19 +0900
Subject: rtlwifi: add support to send beacon frame.

In AP mode, beacon frame is necessary to keep connection.
this patch adds a sending beacon frame routine in initialization routine.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/rtlwifi/core.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index eb20316..a31a127 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -1010,6 +1010,16 @@ static int rtl_op_conf_tx(struct ieee80211_hw *hw,
 	return 0;
 }
 
+static void send_beacon_frame(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct sk_buff *skb = ieee80211_beacon_get(hw, vif);
+
+	if (skb)
+		rtlpriv->intf_ops->adapter_tx(hw, NULL, skb, NULL);
+}
+
 static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
 				    struct ieee80211_vif *vif,
 				    struct ieee80211_bss_conf *bss_conf,
@@ -1040,6 +1050,7 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
 
 				if (rtlpriv->cfg->ops->linked_set_reg)
 					rtlpriv->cfg->ops->linked_set_reg(hw);
+				send_beacon_frame(hw, vif);
 			}
 		}
 		if ((changed & BSS_CHANGED_BEACON_ENABLED &&
-- 
cgit v1.1


From 0b70dc273c13da02241b5b9e76fca5a714bd2965 Mon Sep 17 00:00:00 2001
From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Fri, 23 Jan 2015 16:59:24 +0800
Subject: rtl8192cu: fix the mesh beaconing

Patch "rtlwifi: add support to send beacon frame" allows
the beaconing of rtl8192cu. But mesh beaconing is not
working. Fix this.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 5513217..e5a7c4f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -1509,6 +1509,7 @@ void rtl92cu_set_beacon_related_registers(struct ieee80211_hw *hw)
 	/* TODO: Modify later (Find the right parameters)
 	 * NOTE: Fix test chip's bug (about contention windows's randomness) */
 	if ((mac->opmode == NL80211_IFTYPE_ADHOC) ||
+	    (mac->opmode == NL80211_IFTYPE_MESH_POINT) ||
 	    (mac->opmode == NL80211_IFTYPE_AP)) {
 		rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x50);
 		rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x50);
-- 
cgit v1.1


From 0c8a1e43aa3a1cefe125fd9385057aba5b4b4873 Mon Sep 17 00:00:00 2001
From: Hong Xu <hong@topbug.net>
Date: Sat, 24 Jan 2015 03:34:03 -0800
Subject: ath9k and ath9k_htc: rename variable "led_blink"

ath9k and ath9k_htc use the variable name "led_blink" to indicate
whether the module parameter "blink" is on. This name is easy to
conflict with other variables, and has caused a compiler error found
by kbuild test bot. The compiler error is as following:

drivers/net/wireless/ath/ath9k/ath9k_htc.o:(.data+0x47c): multiple definition of `led_blink'
drivers/net/wireless/ath/ath9k/ath9k.o:(.bss+0x20): first defined here

Fixes: 3a939a671225 ("ath9k_htc: Add a module parameter to disable blink")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Hong Xu <hong@topbug.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ath9k.h        | 2 +-
 drivers/net/wireless/ath/ath9k/gpio.c         | 2 +-
 drivers/net/wireless/ath/ath9k/htc.h          | 2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_gpio.c | 2 +-
 drivers/net/wireless/ath/ath9k/htc_drv_init.c | 4 ++--
 drivers/net/wireless/ath/ath9k/init.c         | 4 ++--
 6 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 1a9fe09..e84b576 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -34,7 +34,7 @@ struct ath_vif;
 
 extern struct ieee80211_ops ath9k_ops;
 extern int ath9k_modparam_nohwcrypt;
-extern int led_blink;
+extern int ath9k_led_blink;
 extern bool is_ath9k_unloaded;
 extern int ath9k_use_chanctx;
 
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 2fef7a4..da344b2 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -49,7 +49,7 @@ void ath_init_leds(struct ath_softc *sc)
 	if (AR_SREV_9100(sc->sc_ah))
 		return;
 
-	if (!led_blink)
+	if (!ath9k_led_blink)
 		sc->led_cdev.default_trigger =
 			ieee80211_get_radio_led_name(sc->hw);
 
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index c43fec5..300d367 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -45,7 +45,7 @@
 extern struct ieee80211_ops ath9k_htc_ops;
 extern int htc_modparam_nohwcrypt;
 #ifdef CONFIG_MAC80211_LEDS
-extern int led_blink;
+extern int ath9k_htc_led_blink;
 #endif
 
 enum htc_phymode {
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
index 998b558..2aabcbd 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
@@ -279,7 +279,7 @@ void ath9k_init_leds(struct ath9k_htc_priv *priv)
 	else
 		priv->ah->led_pin = ATH_LED_PIN_DEF;
 
-	if (!led_blink)
+	if (!ath9k_htc_led_blink)
 		priv->led_cdev.default_trigger =
 			ieee80211_get_radio_led_name(priv->hw);
 
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 9470127..fd22940 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -39,8 +39,8 @@ module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
 MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
 
 #ifdef CONFIG_MAC80211_LEDS
-int led_blink = 1;
-module_param_named(blink, led_blink, int, 0444);
+int ath9k_htc_led_blink = 1;
+module_param_named(blink, ath9k_htc_led_blink, int, 0444);
 MODULE_PARM_DESC(blink, "Enable LED blink on activity");
 
 static const struct ieee80211_tpt_blink ath9k_htc_tpt_blink[] = {
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index d1c3934..2aef14e 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -45,8 +45,8 @@ int ath9k_modparam_nohwcrypt;
 module_param_named(nohwcrypt, ath9k_modparam_nohwcrypt, int, 0444);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
 
-int led_blink;
-module_param_named(blink, led_blink, int, 0444);
+int ath9k_led_blink;
+module_param_named(blink, ath9k_led_blink, int, 0444);
 MODULE_PARM_DESC(blink, "Enable LED blink on activity");
 
 static int ath9k_btcoex_enable;
-- 
cgit v1.1


From 52bd3d2023d4740850a2e30c7f24f18f5fe9d462 Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Fri, 23 Jan 2015 17:09:17 +0530
Subject: mwifiex: add support for SD8801

SD8801 is Marvell's 1x1 802.11bgn offering.
This patch adds Device IDs for SD8801 and also defines card
structure which has definition for register offsets, buffer sizes etc.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Reviewed-by: James Cameron <quozl@laptop.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/sdio.c |  5 +++++
 drivers/net/wireless/mwifiex/sdio.h | 15 +++++++++++++++
 2 files changed, 20 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index a70f1033..cee107f 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -282,6 +282,9 @@ static int mwifiex_sdio_suspend(struct device *dev)
 #define SDIO_DEVICE_ID_MARVELL_8897   (0x912d)
 /* Device ID for SD8887 */
 #define SDIO_DEVICE_ID_MARVELL_8887   (0x9135)
+/* Device ID for SD8801 */
+#define SDIO_DEVICE_ID_MARVELL_8801   (0x9139)
+
 
 /* WLAN IDs */
 static const struct sdio_device_id mwifiex_ids[] = {
@@ -295,6 +298,8 @@ static const struct sdio_device_id mwifiex_ids[] = {
 		.driver_data = (unsigned long) &mwifiex_sdio_sd8897},
 	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887),
 		.driver_data = (unsigned long)&mwifiex_sdio_sd8887},
+	{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8801),
+		.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
 	{},
 };
 
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index 895eea0..a4bb0db 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -34,6 +34,7 @@
 #define SD8797_DEFAULT_FW_NAME "mrvl/sd8797_uapsta.bin"
 #define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
 #define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
+#define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
 
 #define BLOCK_MODE	1
 #define BYTE_MODE	0
@@ -474,6 +475,20 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
 	.auto_tdls = true,
 };
 
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = {
+	.firmware = SD8801_DEFAULT_FW_NAME,
+	.reg = &mwifiex_reg_sd87xx,
+	.max_ports = 16,
+	.mp_agg_pkt_limit = 8,
+	.supports_sdio_new_mode = false,
+	.has_control_mask = true,
+	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
+	.mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
+	.supports_fw_dump = false,
+	.auto_tdls = false,
+};
+
 /*
  * .cmdrsp_complete handler
  */
-- 
cgit v1.1


From eaa3d9fa08c55555aedd967d4bfe7fe03c41cfaf Mon Sep 17 00:00:00 2001
From: Yogesh Ashok Powar <yogeshp@marvell.com>
Date: Fri, 23 Jan 2015 17:09:18 +0530
Subject: mwifiex: add support for USB8801

USB8801 is Marvell's 1x1 802.11bgn offering.
Patch adds Device IDs support and defines TX buffer size.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Frank Huang <frankh@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/usb.c | 13 +++++++++++++
 drivers/net/wireless/mwifiex/usb.h |  4 ++++
 2 files changed, 17 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index 6c62995..50517b7 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -37,6 +37,11 @@ static struct usb_device_id mwifiex_usb_table[] = {
 	{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8797_PID_2,
 				       USB_CLASS_VENDOR_SPEC,
 				       USB_SUBCLASS_VENDOR_SPEC, 0xff)},
+	/* 8801 */
+	{USB_DEVICE(USB8XXX_VID, USB8801_PID_1)},
+	{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8801_PID_2,
+				       USB_CLASS_VENDOR_SPEC,
+				       USB_SUBCLASS_VENDOR_SPEC, 0xff)},
 	/* 8897 */
 	{USB_DEVICE(USB8XXX_VID, USB8897_PID_1)},
 	{USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8897_PID_2,
@@ -361,11 +366,13 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
 	switch (id_product) {
 	case USB8766_PID_1:
 	case USB8797_PID_1:
+	case USB8801_PID_1:
 	case USB8897_PID_1:
 		card->usb_boot_state = USB8XXX_FW_DNLD;
 		break;
 	case USB8766_PID_2:
 	case USB8797_PID_2:
+	case USB8801_PID_2:
 	case USB8897_PID_2:
 		card->usb_boot_state = USB8XXX_FW_READY;
 		break;
@@ -798,6 +805,11 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 		adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
 		strcpy(adapter->fw_name, USB8766_DEFAULT_FW_NAME);
 		break;
+	case USB8801_PID_1:
+	case USB8801_PID_2:
+		adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
+		strcpy(adapter->fw_name, USB8801_DEFAULT_FW_NAME);
+		break;
 	case USB8797_PID_1:
 	case USB8797_PID_2:
 	default:
@@ -1083,4 +1095,5 @@ MODULE_VERSION(USB_VERSION);
 MODULE_LICENSE("GPL v2");
 MODULE_FIRMWARE(USB8766_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(USB8797_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(USB8801_DEFAULT_FW_NAME);
 MODULE_FIRMWARE(USB8897_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/mwifiex/usb.h b/drivers/net/wireless/mwifiex/usb.h
index 0ad1beb..57e1a57 100644
--- a/drivers/net/wireless/mwifiex/usb.h
+++ b/drivers/net/wireless/mwifiex/usb.h
@@ -30,6 +30,9 @@
 #define USB8797_PID_2		0x2044
 #define USB8897_PID_1		0x2045
 #define USB8897_PID_2		0x2046
+#define USB8801_PID_1		0x2049
+#define USB8801_PID_2		0x204a
+
 
 #define USB8XXX_FW_DNLD		1
 #define USB8XXX_FW_READY	2
@@ -41,6 +44,7 @@
 
 #define USB8766_DEFAULT_FW_NAME	"mrvl/usb8766_uapsta.bin"
 #define USB8797_DEFAULT_FW_NAME	"mrvl/usb8797_uapsta.bin"
+#define USB8801_DEFAULT_FW_NAME	"mrvl/usb8801_uapsta.bin"
 #define USB8897_DEFAULT_FW_NAME	"mrvl/usb8897_uapsta.bin"
 
 #define FW_DNLD_TX_BUF_SIZE	620
-- 
cgit v1.1


From 1fe192d8d63f32daf83c49a29c3acd9c062164ec Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Fri, 23 Jan 2015 17:09:19 +0530
Subject: mwifiex: selectively choose ext_scan support

Some devices do not support extended scan.
This patch adds support to enble ext_scan selectively.
For SD/PCIe interfaces, deefine ext_scan_support as part of
card structure and use it to initialize ext_scan in adapter
during registering device. For USB interfaces, we initialize
ext_scan during register_dev handler.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/init.c | 2 +-
 drivers/net/wireless/mwifiex/pcie.c | 2 ++
 drivers/net/wireless/mwifiex/pcie.h | 3 +++
 drivers/net/wireless/mwifiex/sdio.c | 2 ++
 drivers/net/wireless/mwifiex/sdio.h | 8 ++++++++
 drivers/net/wireless/mwifiex/usb.c  | 3 +++
 6 files changed, 19 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index b115e0f..8004d14 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -294,7 +294,7 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
 	memset(&adapter->arp_filter, 0, sizeof(adapter->arp_filter));
 	adapter->arp_filter_size = 0;
 	adapter->max_mgmt_ie_index = MAX_MGMT_IE_INDEX;
-	adapter->ext_scan = true;
+	adapter->ext_scan = false;
 	adapter->key_api_major_ver = 0;
 	adapter->key_api_minor_ver = 0;
 
diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c
index a460b0e..a5828da 100644
--- a/drivers/net/wireless/mwifiex/pcie.c
+++ b/drivers/net/wireless/mwifiex/pcie.c
@@ -204,6 +204,7 @@ static int mwifiex_pcie_probe(struct pci_dev *pdev,
 		card->pcie.blksz_fw_dl = data->blksz_fw_dl;
 		card->pcie.tx_buf_size = data->tx_buf_size;
 		card->pcie.supports_fw_dump = data->supports_fw_dump;
+		card->pcie.can_ext_scan = data->can_ext_scan;
 	}
 
 	if (mwifiex_add_card(card, &add_remove_card_sem, &pcie_ops,
@@ -2563,6 +2564,7 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 	adapter->mem_type_mapping_tbl = mem_type_mapping_tbl;
 	adapter->num_mem_types = ARRAY_SIZE(mem_type_mapping_tbl);
 	strcpy(adapter->fw_name, card->pcie.firmware);
+	adapter->ext_scan = card->pcie.can_ext_scan;
 
 	return 0;
 }
diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h
index 200e8b0..666d40e 100644
--- a/drivers/net/wireless/mwifiex/pcie.h
+++ b/drivers/net/wireless/mwifiex/pcie.h
@@ -206,6 +206,7 @@ struct mwifiex_pcie_device {
 	u16 blksz_fw_dl;
 	u16 tx_buf_size;
 	bool supports_fw_dump;
+	bool can_ext_scan;
 };
 
 static const struct mwifiex_pcie_device mwifiex_pcie8766 = {
@@ -214,6 +215,7 @@ static const struct mwifiex_pcie_device mwifiex_pcie8766 = {
 	.blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD,
 	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K,
 	.supports_fw_dump = false,
+	.can_ext_scan = true,
 };
 
 static const struct mwifiex_pcie_device mwifiex_pcie8897 = {
@@ -222,6 +224,7 @@ static const struct mwifiex_pcie_device mwifiex_pcie8897 = {
 	.blksz_fw_dl = MWIFIEX_PCIE_BLOCK_SIZE_FW_DNLD,
 	.tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
 	.supports_fw_dump = true,
+	.can_ext_scan = true,
 };
 
 struct mwifiex_evt_buf_desc {
diff --git a/drivers/net/wireless/mwifiex/sdio.c b/drivers/net/wireless/mwifiex/sdio.c
index cee107f..91e36cd 100644
--- a/drivers/net/wireless/mwifiex/sdio.c
+++ b/drivers/net/wireless/mwifiex/sdio.c
@@ -107,6 +107,7 @@ mwifiex_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 		card->mp_rx_agg_buf_size = data->mp_rx_agg_buf_size;
 		card->supports_fw_dump = data->supports_fw_dump;
 		card->auto_tdls = data->auto_tdls;
+		card->can_ext_scan = data->can_ext_scan;
 	}
 
 	sdio_claim_host(func);
@@ -1887,6 +1888,7 @@ static int mwifiex_init_sdio(struct mwifiex_adapter *adapter)
 	}
 
 	adapter->auto_tdls = card->auto_tdls;
+	adapter->ext_scan = card->can_ext_scan;
 	return ret;
 }
 
diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h
index a4bb0db..957cca2 100644
--- a/drivers/net/wireless/mwifiex/sdio.h
+++ b/drivers/net/wireless/mwifiex/sdio.h
@@ -256,6 +256,7 @@ struct sdio_mmc_card {
 
 	u8 *mp_regs;
 	u8 auto_tdls;
+	bool can_ext_scan;
 
 	struct mwifiex_sdio_mpa_tx mpa_tx;
 	struct mwifiex_sdio_mpa_rx mpa_rx;
@@ -273,6 +274,7 @@ struct mwifiex_sdio_device {
 	u32 mp_tx_agg_buf_size;
 	u32 mp_rx_agg_buf_size;
 	u8 auto_tdls;
+	bool can_ext_scan;
 };
 
 static const struct mwifiex_sdio_card_reg mwifiex_reg_sd87xx = {
@@ -417,6 +419,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
 	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 	.supports_fw_dump = false,
 	.auto_tdls = false,
+	.can_ext_scan = false,
 };
 
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
@@ -431,6 +434,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
 	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 	.supports_fw_dump = false,
 	.auto_tdls = false,
+	.can_ext_scan = true,
 };
 
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
@@ -445,6 +449,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
 	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 	.supports_fw_dump = false,
 	.auto_tdls = false,
+	.can_ext_scan = true,
 };
 
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
@@ -459,6 +464,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
 	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K,
 	.supports_fw_dump = true,
 	.auto_tdls = false,
+	.can_ext_scan = true,
 };
 
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
@@ -473,6 +479,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
 	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_32K,
 	.supports_fw_dump = false,
 	.auto_tdls = true,
+	.can_ext_scan = true,
 };
 
 static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = {
@@ -487,6 +494,7 @@ static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = {
 	.mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_16K,
 	.supports_fw_dump = false,
 	.auto_tdls = false,
+	.can_ext_scan = true,
 };
 
 /*
diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c
index 50517b7..2238730 100644
--- a/drivers/net/wireless/mwifiex/usb.c
+++ b/drivers/net/wireless/mwifiex/usb.c
@@ -799,16 +799,19 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter)
 	case USB8897_PID_2:
 		adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K;
 		strcpy(adapter->fw_name, USB8897_DEFAULT_FW_NAME);
+		adapter->ext_scan = true;
 		break;
 	case USB8766_PID_1:
 	case USB8766_PID_2:
 		adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
 		strcpy(adapter->fw_name, USB8766_DEFAULT_FW_NAME);
+		adapter->ext_scan = true;
 		break;
 	case USB8801_PID_1:
 	case USB8801_PID_2:
 		adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K;
 		strcpy(adapter->fw_name, USB8801_DEFAULT_FW_NAME);
+		adapter->ext_scan = false;
 		break;
 	case USB8797_PID_1:
 	case USB8797_PID_2:
-- 
cgit v1.1


From 314112e0023acddaae1b43d549bc03be29a146ce Mon Sep 17 00:00:00 2001
From: Taehee Yoo <ap420073@gmail.com>
Date: Sat, 24 Jan 2015 20:55:40 +0900
Subject: rtlwifi: rtl8192cu: Set fw_ready flag

After rtl8192cu download firmware routine, set fw_ready flag.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index e5a7c4f..fe4b699 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -1000,6 +1000,7 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
 	local_save_flags(flags);
 	local_irq_enable();
 
+	rtlhal->fw_ready = false;
 	rtlhal->hw_type = HARDWARE_TYPE_RTL8192CU;
 	err = _rtl92cu_init_mac(hw);
 	if (err) {
@@ -1013,6 +1014,8 @@ int rtl92cu_hw_init(struct ieee80211_hw *hw)
 		err = 1;
 		goto exit;
 	}
+
+	rtlhal->fw_ready = true;
 	rtlhal->last_hmeboxnum = 0; /* h2c */
 	_rtl92cu_phy_param_tab_init(hw);
 	rtl92cu_phy_mac_config(hw);
-- 
cgit v1.1


From 8c6796758f0abd8ee2b4d7e8c6ca5f7adf737ee6 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:42 +0200
Subject: wil6210: sync WMI with firmware

Incorporate changes from firmware.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/wmi.c | 15 +++++----
 drivers/net/wireless/ath/wil6210/wmi.h | 58 ++++++++++++++++++++++++++++++----
 2 files changed, 59 insertions(+), 14 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index b2b0fe1..097d78b 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1133,12 +1133,13 @@ int wmi_rx_chain_add(struct wil6210_priv *wil, struct vring *vring)
 	return rc;
 }
 
-int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r)
+int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_bb, u32 *t_rf)
 {
 	int rc;
 	struct wmi_temp_sense_cmd cmd = {
-		.measure_marlon_m_en = cpu_to_le32(!!t_m),
-		.measure_marlon_r_en = cpu_to_le32(!!t_r),
+		.measure_baseband_en = cpu_to_le32(!!t_bb),
+		.measure_rf_en = cpu_to_le32(!!t_rf),
+		.measure_mode = cpu_to_le32(TEMPERATURE_MEASURE_NOW),
 	};
 	struct {
 		struct wil6210_mbox_hdr_wmi wmi;
@@ -1150,10 +1151,10 @@ int wmi_get_temperature(struct wil6210_priv *wil, u32 *t_m, u32 *t_r)
 	if (rc)
 		return rc;
 
-	if (t_m)
-		*t_m = le32_to_cpu(reply.evt.marlon_m_t1000);
-	if (t_r)
-		*t_r = le32_to_cpu(reply.evt.marlon_r_t1000);
+	if (t_bb)
+		*t_bb = le32_to_cpu(reply.evt.baseband_t1000);
+	if (t_rf)
+		*t_rf = le32_to_cpu(reply.evt.rf_t1000);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index b5102f0..8a4af61 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -29,8 +29,10 @@
 
 /* General */
 #define WILOCITY_MAX_ASSOC_STA (8)
+#define WILOCITY_DEFAULT_ASSOC_STA (1)
 #define WMI_MAC_LEN		(6)
 #define WMI_PROX_RANGE_NUM	(3)
+#define WMI_MAX_LOSS_DMG_BEACONS	(32)
 
 /* List of Commands */
 enum wmi_command_id {
@@ -48,7 +50,7 @@ enum wmi_command_id {
 	WMI_SET_WSC_STATUS_CMDID	= 0x0041,
 	WMI_PXMT_RANGE_CFG_CMDID	= 0x0042,
 	WMI_PXMT_SNR2_RANGE_CFG_CMDID	= 0x0043,
-	WMI_FAST_MEM_ACC_MODE_CMDID	= 0x0300,
+/*	WMI_FAST_MEM_ACC_MODE_CMDID	= 0x0300, */
 	WMI_MEM_READ_CMDID		= 0x0800,
 	WMI_MEM_WR_CMDID		= 0x0801,
 	WMI_ECHO_CMDID			= 0x0803,
@@ -102,6 +104,8 @@ enum wmi_command_id {
 	WMI_MAINTAIN_RESUME_CMDID	= 0x0851,
 	WMI_RS_MGMT_CMDID		= 0x0852,
 	WMI_RF_MGMT_CMDID		= 0x0853,
+	WMI_THERMAL_THROTTLING_CTRL_CMDID	= 0x0854,
+	WMI_THERMAL_THROTTLING_GET_STATUS_CMDID	= 0x0855,
 	/* Performance monitoring commands */
 	WMI_BF_CTRL_CMDID		= 0x0862,
 	WMI_NOTIFY_REQ_CMDID		= 0x0863,
@@ -136,6 +140,7 @@ enum wmi_command_id {
 	WMI_EAPOL_TX_CMDID		= 0xf04c,
 	WMI_MAC_ADDR_REQ_CMDID		= 0xf04d,
 	WMI_FW_VER_CMDID		= 0xf04e,
+	WMI_PMC_CMDID			= 0xf04f,
 };
 
 /*
@@ -283,8 +288,8 @@ enum wmi_scan_type {
 	WMI_LONG_SCAN		= 0,
 	WMI_SHORT_SCAN		= 1,
 	WMI_PBC_SCAN		= 2,
-	WMI_ACTIVE_SCAN		= 3,
-	WMI_DIRECT_SCAN		= 4,
+	WMI_DIRECT_SCAN		= 3,
+	WMI_ACTIVE_SCAN		= 4,
 };
 
 struct wmi_start_scan_cmd {
@@ -375,6 +380,17 @@ struct wmi_rf_mgmt_cmd {
 } __packed;
 
 /*
+ * WMI_THERMAL_THROTTLING_CTRL_CMDID
+ */
+#define THERMAL_THROTTLING_USE_DEFAULT_MAX_TXOP_LENGTH	(0xFFFFFFFF)
+
+struct wmi_thermal_throttling_ctrl_cmd {
+	__le32 time_on_usec;
+	__le32 time_off_usec;
+	__le32 max_txop_length_usec;
+} __packed;
+
+/*
  * WMI_RF_RX_TEST_CMDID
  */
 struct wmi_rf_rx_test_cmd {
@@ -648,6 +664,7 @@ enum wmi_cfg_rx_chain_cmd_action {
 enum wmi_cfg_rx_chain_cmd_decap_trans_type {
 	WMI_DECAP_TYPE_802_3			= 0,
 	WMI_DECAP_TYPE_NATIVE_WIFI		= 1,
+	WMI_DECAP_TYPE_NONE			= 2,
 };
 
 enum wmi_cfg_rx_chain_cmd_nwifi_ds_trans_type {
@@ -785,9 +802,17 @@ struct wmi_echo_cmd {
  *
  * Measure MAC and radio temperatures
  */
+
+/* Possible modes for temperature measurement */
+enum wmi_temperature_measure_mode {
+	TEMPERATURE_USE_OLD_VALUE	= 0x1,
+	TEMPERATURE_MEASURE_NOW		= 0x2,
+};
+
 struct wmi_temp_sense_cmd {
-	__le32 measure_marlon_m_en;
-	__le32 measure_marlon_r_en;
+	__le32 measure_baseband_en;
+	__le32 measure_rf_en;
+	__le32 measure_mode;
 } __packed;
 
 /*
@@ -843,6 +868,7 @@ enum wmi_event_id {
 	WMI_BF_RXSS_MGMT_DONE_EVENTID		= 0x1839,
 	WMI_RS_MGMT_DONE_EVENTID		= 0x1852,
 	WMI_RF_MGMT_STATUS_EVENTID		= 0x1853,
+	WMI_THERMAL_THROTTLING_STATUS_EVENTID	= 0x1855,
 	WMI_BF_SM_MGMT_DONE_EVENTID		= 0x1838,
 	WMI_RX_MGMT_PACKET_EVENTID		= 0x1840,
 	WMI_TX_MGMT_PACKET_EVENTID		= 0x1841,
@@ -859,6 +885,7 @@ enum wmi_event_id {
 	WMI_FLASH_READ_DONE_EVENTID		= 0x1902,
 	WMI_FLASH_WRITE_DONE_EVENTID		= 0x1903,
 	/*P2P*/
+	WMI_P2P_CFG_DONE_EVENTID		= 0x1910,
 	WMI_PORT_ALLOCATED_EVENTID		= 0x1911,
 	WMI_PORT_DELETED_EVENTID		= 0x1912,
 	WMI_LISTEN_STARTED_EVENTID		= 0x1914,
@@ -899,6 +926,15 @@ struct wmi_rf_mgmt_status_event {
 } __packed;
 
 /*
+ * WMI_THERMAL_THROTTLING_STATUS_EVENTID
+ */
+struct wmi_thermal_throttling_status_event {
+	__le32 time_on_usec;
+	__le32 time_off_usec;
+	__le32 max_txop_length_usec;
+} __packed;
+
+/*
  * WMI_GET_STATUS_DONE_EVENTID
  */
 struct wmi_get_status_done_event {
@@ -1155,6 +1191,14 @@ struct wmi_get_pcp_channel_event {
 } __packed;
 
 /*
+ * WMI_P2P_CFG_DONE_EVENTID
+ */
+struct wmi_p2p_cfg_done_event {
+	u8 status;	/* wmi_fw_status */
+	u8 reserved[3];
+} __packed;
+
+/*
 * WMI_PORT_ALLOCATED_EVENTID
 */
 struct wmi_port_allocated_event {
@@ -1282,8 +1326,8 @@ struct wmi_echo_event {
  * Measure MAC and radio temperatures
  */
 struct wmi_temp_sense_done_event {
-	__le32 marlon_m_t1000;
-	__le32 marlon_r_t1000;
+	__le32 baseband_t1000;
+	__le32 rf_t1000;
 } __packed;
 
 #endif /* __WILOCITY_WMI_H__ */
-- 
cgit v1.1


From c5e96c91fa8f98ddceac16f410fc741648585401 Mon Sep 17 00:00:00 2001
From: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:43 +0200
Subject: wil6210: fix timing of netif_carrier_on indication

netif_carrier_on indication was too late. In case Rx packet received
before netif_carrier_on indication, upper layers could not send
Tx packet back.

The fix is to indicate netif_carrier_on earlier:
for STA, indicate netif_carrier_on when association starts.
for AP/PCP, indicate netif_carrier_on upon starting AP/PCP.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c |  8 +++++---
 drivers/net/wireless/ath/wil6210/main.c     | 30 ++++++-----------------------
 drivers/net/wireless/ath/wil6210/netdev.c   |  4 +---
 drivers/net/wireless/ath/wil6210/wil6210.h  |  2 --
 drivers/net/wireless/ath/wil6210/wmi.c      |  2 --
 5 files changed, 12 insertions(+), 34 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index bd013fd..553aa2e 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -454,6 +454,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
 
 	rc = wmi_send(wil, WMI_CONNECT_CMDID, &conn, sizeof(conn));
 	if (rc == 0) {
+		netif_carrier_on(ndev);
 		/* Connect can take lots of time */
 		mod_timer(&wil->connect_timer,
 			  jiffies + msecs_to_jiffies(2000));
@@ -757,12 +758,12 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 
 	wil->secure_pcp = info->privacy;
 
+	netif_carrier_on(ndev);
+
 	rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
 			   channel->hw_value);
 	if (rc)
-		goto out;
-
-	netif_carrier_on(ndev);
+		netif_carrier_off(ndev);
 
 out:
 	mutex_unlock(&wil->mutex);
@@ -777,6 +778,7 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
 
 	wil_dbg_misc(wil, "%s()\n", __func__);
 
+	netif_carrier_off(ndev);
 	wil_set_recovery_state(wil, fw_recovery_idle);
 
 	mutex_lock(&wil->mutex);
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 62dc241..00c9b0f 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -248,7 +248,9 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
 	switch (wdev->iftype) {
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_P2P_CLIENT:
-		wil_link_off(wil);
+		netif_tx_stop_all_queues(ndev);
+		netif_carrier_off(ndev);
+
 		if (test_bit(wil_status_fwconnected, wil->status)) {
 			clear_bit(wil_status_fwconnected, wil->status);
 			cfg80211_disconnected(ndev, reason_code,
@@ -395,6 +397,8 @@ static void wil_connect_worker(struct work_struct *work)
 	int rc;
 	struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
 						connect_worker);
+	struct net_device *ndev = wil_to_ndev(wil);
+
 	int cid = wil->pending_connect_cid;
 	int ringid = wil_find_free_vring(wil);
 
@@ -409,7 +413,7 @@ static void wil_connect_worker(struct work_struct *work)
 	wil->pending_connect_cid = -1;
 	if (rc == 0) {
 		wil->sta[cid].status = wil_sta_connected;
-		wil_link_on(wil);
+		netif_tx_wake_all_queues(ndev);
 	} else {
 		wil->sta[cid].status = wil_sta_unused;
 	}
@@ -741,28 +745,6 @@ void wil_fw_error_recovery(struct wil6210_priv *wil)
 	schedule_work(&wil->fw_error_worker);
 }
 
-void wil_link_on(struct wil6210_priv *wil)
-{
-	struct net_device *ndev = wil_to_ndev(wil);
-
-	wil_dbg_misc(wil, "%s()\n", __func__);
-
-	netif_carrier_on(ndev);
-	wil_dbg_misc(wil, "netif_tx_wake : link on\n");
-	netif_tx_wake_all_queues(ndev);
-}
-
-void wil_link_off(struct wil6210_priv *wil)
-{
-	struct net_device *ndev = wil_to_ndev(wil);
-
-	wil_dbg_misc(wil, "%s()\n", __func__);
-
-	netif_tx_stop_all_queues(ndev);
-	wil_dbg_misc(wil, "netif_tx_stop : link off\n");
-	netif_carrier_off(ndev);
-}
-
 int __wil_up(struct wil6210_priv *wil)
 {
 	struct net_device *ndev = wil_to_ndev(wil);
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index e81703c..f1f9e51 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -174,7 +174,7 @@ void *wil_if_alloc(struct device *dev, void __iomem *csr)
 	netif_napi_add(ndev, &wil->napi_tx, wil6210_netdev_poll_tx,
 		       WIL6210_NAPI_BUDGET);
 
-	wil_link_off(wil);
+	netif_tx_stop_all_queues(ndev);
 
 	return wil;
 
@@ -217,8 +217,6 @@ int wil_if_add(struct wil6210_priv *wil)
 		return rc;
 	}
 
-	wil_link_off(wil);
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index da3fe78..b4404e7 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -649,8 +649,6 @@ void wil_priv_deinit(struct wil6210_priv *wil);
 int wil_reset(struct wil6210_priv *wil);
 void wil_fw_error_recovery(struct wil6210_priv *wil);
 void wil_set_recovery_state(struct wil6210_priv *wil, int state);
-void wil_link_on(struct wil6210_priv *wil);
-void wil_link_off(struct wil6210_priv *wil);
 int wil_up(struct wil6210_priv *wil);
 int __wil_up(struct wil6210_priv *wil);
 int wil_down(struct wil6210_priv *wil);
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 097d78b..0f3e433 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -566,7 +566,6 @@ static void wil_addba_tx_cid(struct wil6210_priv *wil, u8 cid, u16 wsize)
 
 static void wmi_evt_linkup(struct wil6210_priv *wil, int id, void *d, int len)
 {
-	struct net_device *ndev = wil_to_ndev(wil);
 	struct wmi_data_port_open_event *evt = d;
 	u8 cid = evt->cid;
 
@@ -580,7 +579,6 @@ static void wmi_evt_linkup(struct wil6210_priv *wil, int id, void *d, int len)
 	wil->sta[cid].data_port_open = true;
 	if (agg_wsize >= 0)
 		wil_addba_tx_cid(wil, cid, agg_wsize);
-	netif_carrier_on(ndev);
 }
 
 static void wmi_evt_linkdown(struct wil6210_priv *wil, int id, void *d, int len)
-- 
cgit v1.1


From 32a20d46b3dcb2f96ffcd5f967616cc599bdf542 Mon Sep 17 00:00:00 2001
From: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:44 +0200
Subject: wil6210: ignore firmware failure to gracefully stop AP

upon cfg80211_stop_ap, a graceful AP shutdown is requested from firmware
followed by firmware reset.
In case graceful request failed, error was returned to cfg80211.

The change is to return success in this scenario, because firmware
reset will anyhow shutdown the AP.

Signed-off-by: Dedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 553aa2e..6b7664d 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -773,7 +773,6 @@ out:
 static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
 				struct net_device *ndev)
 {
-	int rc, rc1;
 	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
 
 	wil_dbg_misc(wil, "%s()\n", __func__);
@@ -783,14 +782,17 @@ static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
 
 	mutex_lock(&wil->mutex);
 
-	rc = wmi_pcp_stop(wil);
+	wmi_pcp_stop(wil);
 
 	__wil_down(wil);
-	rc1 = __wil_up(wil);
+	__wil_up(wil);
 
 	mutex_unlock(&wil->mutex);
 
-	return min(rc, rc1);
+	/* some functions above might fail (e.g. __wil_up). Nevertheless, we
+	 * return success because AP has stopped
+	 */
+	return 0;
 }
 
 static int wil_cfg80211_del_station(struct wiphy *wiphy,
-- 
cgit v1.1


From f1871cd95067eb695ae126d43c12bc738627a90e Mon Sep 17 00:00:00 2001
From: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:45 +0200
Subject: wil6210: Add Tx queue len configuration

Tx queue was hard-coded to 1000 in ether_setup. Add wil_dev_setup
function which configures tx queue len to chosen default value
after calling ether_setup.

Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/netdev.c  | 11 ++++++++---
 drivers/net/wireless/ath/wil6210/wil6210.h |  3 ++-
 2 files changed, 10 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index f1f9e51..ace30c1 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -15,7 +15,6 @@
  */
 
 #include <linux/etherdevice.h>
-
 #include "wil6210.h"
 #include "txrx.h"
 
@@ -122,6 +121,12 @@ static int wil6210_netdev_poll_tx(struct napi_struct *napi, int budget)
 	return min(tx_done, budget);
 }
 
+static void wil_dev_setup(struct net_device *dev)
+{
+	ether_setup(dev);
+	dev->tx_queue_len = WIL_TX_Q_LEN_DEFAULT;
+}
+
 void *wil_if_alloc(struct device *dev, void __iomem *csr)
 {
 	struct net_device *ndev;
@@ -153,7 +158,7 @@ void *wil_if_alloc(struct device *dev, void __iomem *csr)
 	ch = wdev->wiphy->bands[IEEE80211_BAND_60GHZ]->channels;
 	cfg80211_chandef_create(&wdev->preset_chandef, ch, NL80211_CHAN_NO_HT);
 
-	ndev = alloc_netdev(0, "wlan%d", NET_NAME_UNKNOWN, ether_setup);
+	ndev = alloc_netdev(0, "wlan%d", NET_NAME_UNKNOWN, wil_dev_setup);
 	if (!ndev) {
 		dev_err(dev, "alloc_netdev_mqs failed\n");
 		rc = -ENOMEM;
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index b4404e7..fc196bf 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -44,6 +44,7 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
 
 #define WIL6210_MEM_SIZE (2*1024*1024UL)
 
+#define WIL_TX_Q_LEN_DEFAULT		(4000)
 #define WIL_RX_RING_SIZE_ORDER_DEFAULT	(9)
 #define WIL_TX_RING_SIZE_ORDER_DEFAULT	(9)
 /* limit ring size in range [32..32k] */
-- 
cgit v1.1


From 3baedd9167c2e3a3593c20769256b700aba929da Mon Sep 17 00:00:00 2001
From: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:46 +0200
Subject: wil6210: tuning rings size

Tuning rings size for performance optimization.
Increasing Tx ring size, allows buffering more packets for HW, thus
eliminating idle periods which were observed with smaller ring at
high throughput, because HW was fetching packets faster than driver was
filling them into the TX ring. Rx ring was similarly increased to
avoid same problems in Rx.

Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/wil6210.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index fc196bf..2521ba1 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -45,8 +45,8 @@ static inline u32 WIL_GET_BITS(u32 x, int b0, int b1)
 #define WIL6210_MEM_SIZE (2*1024*1024UL)
 
 #define WIL_TX_Q_LEN_DEFAULT		(4000)
-#define WIL_RX_RING_SIZE_ORDER_DEFAULT	(9)
-#define WIL_TX_RING_SIZE_ORDER_DEFAULT	(9)
+#define WIL_RX_RING_SIZE_ORDER_DEFAULT	(10)
+#define WIL_TX_RING_SIZE_ORDER_DEFAULT	(10)
 /* limit ring size in range [32..32k] */
 #define WIL_RING_SIZE_ORDER_MIN	(5)
 #define WIL_RING_SIZE_ORDER_MAX	(15)
-- 
cgit v1.1


From 918465a3c2f7f28926821500152d89511d82166a Mon Sep 17 00:00:00 2001
From: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:47 +0200
Subject: wil6210: interrupt moderation configuration update

Due to HW limitation, inter-packet gap timeout max value is 13 usec.
Update of current thresholds from 15 to 13 usec.

Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/wil6210.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 2521ba1..3575b5d 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -78,8 +78,8 @@ static inline u32 wil_mtu2macbuf(u32 mtu)
 #define WIL_MAX_ETH_MTU		(IEEE80211_MAX_DATA_LEN_DMG - 8)
 /* Max supported by wil6210 value for interrupt threshold is 5sec. */
 #define WIL6210_ITR_TRSH_MAX (5000000)
-#define WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT (15) /* usec */
-#define WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT (15) /* usec */
+#define WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT (13) /* usec */
+#define WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT (13) /* usec */
 #define WIL6210_ITR_TX_MAX_BURST_DURATION_DEFAULT (500) /* usec */
 #define WIL6210_ITR_RX_MAX_BURST_DURATION_DEFAULT (500) /* usec */
 #define WIL6210_FW_RECOVERY_RETRIES	(5) /* try to recover this many times */
-- 
cgit v1.1


From 1f80af2e38f7a1f66b75c63ba83f968da62f5985 Mon Sep 17 00:00:00 2001
From: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:48 +0200
Subject: wil6210: remove unnecessary interrupt moderation module parameters

Interrupt moderation parameters will never be passed as module
parameters. For product, they will be hard-coded after lab testing,
and for debugging, they can be altered via debugfs.

Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/main.c | 38 +++++----------------------------
 1 file changed, 5 insertions(+), 33 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 00c9b0f..d259416 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2012-2014 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -33,34 +33,6 @@ static bool no_fw_load = true;
 module_param(no_fw_load, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(no_fw_load, " do not download FW, use one in on-card flash.");
 
-static unsigned int tx_interframe_timeout =
-		WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT;
-
-module_param(tx_interframe_timeout, uint, S_IRUGO);
-MODULE_PARM_DESC(tx_interframe_timeout,
-		 " Interrupt moderation TX interframe timeout, usecs.");
-
-static unsigned int rx_interframe_timeout =
-		WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT;
-
-module_param(rx_interframe_timeout, uint, S_IRUGO);
-MODULE_PARM_DESC(rx_interframe_timeout,
-		 " Interrupt moderation RX interframe timeout, usecs.");
-
-static unsigned int tx_max_burst_duration =
-		WIL6210_ITR_TX_MAX_BURST_DURATION_DEFAULT;
-
-module_param(tx_max_burst_duration, uint, S_IRUGO);
-MODULE_PARM_DESC(tx_max_burst_duration,
-		 " Interrupt moderation TX max burst duration, usecs.");
-
-static unsigned int rx_max_burst_duration =
-		WIL6210_ITR_RX_MAX_BURST_DURATION_DEFAULT;
-
-module_param(rx_max_burst_duration, uint, S_IRUGO);
-MODULE_PARM_DESC(rx_max_burst_duration,
-		 " Interrupt moderation RX max burst duration, usecs.");
-
 /* if not set via modparam, will be set to default value of 1/8 of
  * rx ring size during init flow
  */
@@ -463,10 +435,10 @@ int wil_priv_init(struct wil6210_priv *wil)
 		goto out_wmi_wq;
 
 	wil->last_fw_recovery = jiffies;
-	wil->tx_interframe_timeout = tx_interframe_timeout;
-	wil->rx_interframe_timeout = rx_interframe_timeout;
-	wil->tx_max_burst_duration = tx_max_burst_duration;
-	wil->rx_max_burst_duration = rx_max_burst_duration;
+	wil->tx_interframe_timeout = WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT;
+	wil->rx_interframe_timeout = WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT;
+	wil->tx_max_burst_duration = WIL6210_ITR_TX_MAX_BURST_DURATION_DEFAULT;
+	wil->rx_max_burst_duration = WIL6210_ITR_RX_MAX_BURST_DURATION_DEFAULT;
 
 	if (rx_ring_overflow_thrsh == WIL6210_RX_HIGH_TRSH_INIT)
 		rx_ring_overflow_thrsh = WIL6210_RX_HIGH_TRSH_DEFAULT;
-- 
cgit v1.1


From 713c8a29e4d869f7ca4cadc8a6ac2c12de532ed9 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:49 +0200
Subject: wil6210: implement skb Tx status reporting

Implement Tx status reporting using skb_complete_wifi_ack().

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c |  1 +
 drivers/net/wireless/ath/wil6210/txrx.c     | 19 +++++++++++++++++--
 2 files changed, 18 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 6b7664d..f65da91 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -858,6 +858,7 @@ static void wil_wiphy_init(struct wiphy *wiphy)
 	wiphy->cipher_suites = wil_cipher_suites;
 	wiphy->n_cipher_suites = ARRAY_SIZE(wil_cipher_suites);
 	wiphy->mgmt_stypes = wil_mgmt_stypes;
+	wiphy->features |= NL80211_FEATURE_SK_TX_STATUS;
 }
 
 struct wireless_dev *wil_cfg80211_init(struct device *dev)
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index b58ee52..0499ebc 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -1121,6 +1121,22 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 	return NET_XMIT_DROP;
 }
 
+static inline bool wil_need_txstat(struct sk_buff *skb)
+{
+	struct ethhdr *eth = (void *)skb->data;
+
+	return is_unicast_ether_addr(eth->h_dest) && skb->sk &&
+	       (skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS);
+}
+
+static inline void wil_consume_skb(struct sk_buff *skb, bool acked)
+{
+	if (unlikely(wil_need_txstat(skb)))
+		skb_complete_wifi_ack(skb, acked);
+	else
+		acked ? dev_consume_skb_any(skb) : dev_kfree_skb_any(skb);
+}
+
 /**
  * Clean up transmitted skb's from the Tx VRING
  *
@@ -1199,8 +1215,7 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 					ndev->stats.tx_errors++;
 					stats->tx_errors++;
 				}
-
-				dev_kfree_skb_any(skb);
+				wil_consume_skb(skb, d->dma.error == 0);
 			}
 			memset(ctx, 0, sizeof(*ctx));
 			/* There is no need to touch HW descriptor:
-- 
cgit v1.1


From 40822a901e3c07e50fe9f6a0cbbe77cba9fbc898 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:50 +0200
Subject: wil6210: implement cfg80211 probe_client() op

Access point require this API to check peer alive status.
Assume peer is alive when it is connected, because
firmware implements keep alive checks and will disconnect
peer if it is not alive.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 91 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/wil6210/main.c     |  5 ++
 drivers/net/wireless/ath/wil6210/wil6210.h  | 12 ++++
 3 files changed, 108 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index f65da91..e758f43 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -808,6 +808,96 @@ static int wil_cfg80211_del_station(struct wiphy *wiphy,
 	return 0;
 }
 
+/* probe_client handling */
+static void wil_probe_client_handle(struct wil6210_priv *wil,
+				    struct wil_probe_client_req *req)
+{
+	struct net_device *ndev = wil_to_ndev(wil);
+	struct wil_sta_info *sta = &wil->sta[req->cid];
+	/* assume STA is alive if it is still connected,
+	 * else FW will disconnect it
+	 */
+	bool alive = (sta->status == wil_sta_connected);
+
+	cfg80211_probe_status(ndev, sta->addr, req->cookie, alive, GFP_KERNEL);
+}
+
+static struct list_head *next_probe_client(struct wil6210_priv *wil)
+{
+	struct list_head *ret = NULL;
+
+	mutex_lock(&wil->probe_client_mutex);
+
+	if (!list_empty(&wil->probe_client_pending)) {
+		ret = wil->probe_client_pending.next;
+		list_del(ret);
+	}
+
+	mutex_unlock(&wil->probe_client_mutex);
+
+	return ret;
+}
+
+void wil_probe_client_worker(struct work_struct *work)
+{
+	struct wil6210_priv *wil = container_of(work, struct wil6210_priv,
+						probe_client_worker);
+	struct wil_probe_client_req *req;
+	struct list_head *lh;
+
+	while ((lh = next_probe_client(wil)) != NULL) {
+		req = list_entry(lh, struct wil_probe_client_req, list);
+
+		wil_probe_client_handle(wil, req);
+		kfree(req);
+	}
+}
+
+void wil_probe_client_flush(struct wil6210_priv *wil)
+{
+	struct wil_probe_client_req *req, *t;
+
+	wil_dbg_misc(wil, "%s()\n", __func__);
+
+	mutex_lock(&wil->probe_client_mutex);
+
+	list_for_each_entry_safe(req, t, &wil->probe_client_pending, list) {
+		list_del(&req->list);
+		kfree(req);
+	}
+
+	mutex_unlock(&wil->probe_client_mutex);
+}
+
+static int wil_cfg80211_probe_client(struct wiphy *wiphy,
+				     struct net_device *dev,
+				     const u8 *peer, u64 *cookie)
+{
+	struct wil6210_priv *wil = wiphy_to_wil(wiphy);
+	struct wil_probe_client_req *req;
+	int cid = wil_find_cid(wil, peer);
+
+	wil_dbg_misc(wil, "%s(%pM => CID %d)\n", __func__, peer, cid);
+
+	if (cid < 0)
+		return -ENOLINK;
+
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->cid = cid;
+	req->cookie = cid;
+
+	mutex_lock(&wil->probe_client_mutex);
+	list_add_tail(&req->list, &wil->probe_client_pending);
+	mutex_unlock(&wil->probe_client_mutex);
+
+	*cookie = req->cookie;
+	queue_work(wil->wq_service, &wil->probe_client_worker);
+	return 0;
+}
+
 static struct cfg80211_ops wil_cfg80211_ops = {
 	.scan = wil_cfg80211_scan,
 	.connect = wil_cfg80211_connect,
@@ -827,6 +917,7 @@ static struct cfg80211_ops wil_cfg80211_ops = {
 	.start_ap = wil_cfg80211_start_ap,
 	.stop_ap = wil_cfg80211_stop_ap,
 	.del_station = wil_cfg80211_del_station,
+	.probe_client = wil_cfg80211_probe_client,
 };
 
 static void wil_wiphy_init(struct wiphy *wiphy)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index d259416..b04e0af 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -405,6 +405,7 @@ int wil_priv_init(struct wil6210_priv *wil)
 	mutex_init(&wil->wmi_mutex);
 	mutex_init(&wil->back_rx_mutex);
 	mutex_init(&wil->back_tx_mutex);
+	mutex_init(&wil->probe_client_mutex);
 
 	init_completion(&wil->wmi_ready);
 	init_completion(&wil->wmi_call);
@@ -419,10 +420,12 @@ int wil_priv_init(struct wil6210_priv *wil)
 	INIT_WORK(&wil->fw_error_worker, wil_fw_error_worker);
 	INIT_WORK(&wil->back_rx_worker, wil_back_rx_worker);
 	INIT_WORK(&wil->back_tx_worker, wil_back_tx_worker);
+	INIT_WORK(&wil->probe_client_worker, wil_probe_client_worker);
 
 	INIT_LIST_HEAD(&wil->pending_wmi_ev);
 	INIT_LIST_HEAD(&wil->back_rx_pending);
 	INIT_LIST_HEAD(&wil->back_tx_pending);
+	INIT_LIST_HEAD(&wil->probe_client_pending);
 	spin_lock_init(&wil->wmi_ev_lock);
 	init_waitqueue_head(&wil->wq);
 
@@ -485,6 +488,8 @@ void wil_priv_deinit(struct wil6210_priv *wil)
 	cancel_work_sync(&wil->back_rx_worker);
 	wil_back_tx_flush(wil);
 	cancel_work_sync(&wil->back_tx_worker);
+	wil_probe_client_flush(wil);
+	cancel_work_sync(&wil->probe_client_worker);
 	destroy_workqueue(wil->wq_service);
 	destroy_workqueue(wil->wmi_wq);
 }
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 3575b5d..90dc24f 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -504,6 +504,12 @@ struct wil_back_tx {
 	u16 agg_timeout;
 };
 
+struct wil_probe_client_req {
+	struct list_head list;
+	u64 cookie;
+	u8 cid;
+};
+
 struct wil6210_priv {
 	struct pci_dev *pdev;
 	int n_msi;
@@ -564,6 +570,10 @@ struct wil6210_priv {
 	struct list_head back_tx_pending;
 	struct mutex back_tx_mutex; /* protect @back_tx_pending */
 	struct work_struct back_tx_worker;
+	/* keep alive */
+	struct list_head probe_client_pending;
+	struct mutex probe_client_mutex; /* protect @probe_client_pending */
+	struct work_struct probe_client_worker;
 	/* DMA related */
 	struct vring vring_rx;
 	struct vring vring_tx[WIL6210_MAX_TX_RINGS];
@@ -722,6 +732,8 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan);
 int wmi_pcp_stop(struct wil6210_priv *wil);
 void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
 			u16 reason_code, bool from_event);
+void wil_probe_client_flush(struct wil6210_priv *wil);
+void wil_probe_client_worker(struct work_struct *work);
 
 int wil_rx_init(struct wil6210_priv *wil, u16 size);
 void wil_rx_fini(struct wil6210_priv *wil);
-- 
cgit v1.1


From 382afc3d055b9ac4d175a4b5b9352128fc091aa3 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 25 Jan 2015 10:52:51 +0200
Subject: wil6210: move Rx reorder buffer allocation out of spinlock

This fixes issue reported by Dan Carpenter:
The patch 3277213feb1b: "wil6210: ADDBA/DELBA flows" from Dec 23,
2014, leads to the following static checker warning:

        drivers/net/wireless/ath/wil6210/rx_reorder.c:205 wil_tid_ampdu_rx_alloc()
        error: scheduling with locks held: 'spin_lock:tid_rx_lock'

drivers/net/wireless/ath/wil6210/rx_reorder.c
   202  struct wil_tid_ampdu_rx *wil_tid_ampdu_rx_alloc(struct wil6210_priv *wil,
   203                                                  int size, u16 ssn)
   204  {
   205          struct wil_tid_ampdu_rx *r = kzalloc(sizeof(*r), GFP_KERNEL);
                                                                 ^^^^^^^^^^
   206
   207          if (!r)
   208                  return NULL;
   209
   210          r->reorder_buf =
   211                  kcalloc(size, sizeof(struct sk_buff *), GFP_KERNEL);
                                                                ^^^^^^^^^^^
   212          r->reorder_time =
   213                  kcalloc(size, sizeof(unsigned long), GFP_KERNEL);
                                                             ^^^^^^^^^^^
   214          if (!r->reorder_buf || !r->reorder_time) {
   215                  kfree(r->reorder_buf);
   216                  kfree(r->reorder_time);
   217                  kfree(r);
   218                  return NULL;
   219          }
   220

[ snip ]

   331          spin_lock_bh(&sta->tid_rx_lock);
                ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
spin lock held.

   332
   333          wil_tid_ampdu_rx_free(wil, sta->tid_rx[tid]);
   334          sta->tid_rx[tid] = wil_tid_ampdu_rx_alloc(wil, agg_wsize, ssn);
                                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
function called with the lock held.

   335
   336          spin_unlock_bh(&sta->tid_rx_lock);

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/rx_reorder.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/rx_reorder.c b/drivers/net/wireless/ath/wil6210/rx_reorder.c
index 5522092..ca10dcf 100644
--- a/drivers/net/wireless/ath/wil6210/rx_reorder.c
+++ b/drivers/net/wireless/ath/wil6210/rx_reorder.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2014 Qualcomm Atheros, Inc.
+ * Copyright (c) 2014-2015 Qualcomm Atheros, Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -292,6 +292,7 @@ __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock)
 	u16 agg_timeout = req->ba_timeout;
 	u16 status = WLAN_STATUS_SUCCESS;
 	u16 ssn = req->ba_seq_ctrl >> 4;
+	struct wil_tid_ampdu_rx *r;
 	int rc;
 
 	might_sleep();
@@ -328,11 +329,10 @@ __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock)
 		return;
 
 	/* apply */
+	r = wil_tid_ampdu_rx_alloc(wil, agg_wsize, ssn);
 	spin_lock_bh(&sta->tid_rx_lock);
-
 	wil_tid_ampdu_rx_free(wil, sta->tid_rx[tid]);
-	sta->tid_rx[tid] = wil_tid_ampdu_rx_alloc(wil, agg_wsize, ssn);
-
+	sta->tid_rx[tid] = r;
 	spin_unlock_bh(&sta->tid_rx_lock);
 }
 
-- 
cgit v1.1


From 5ef1e604194ee629c5d9fd6b9a4d3c424cfd2a84 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:30 +0100
Subject: brcmfmac: Relax scheduling of msgbuf worker on high throughput.

On every tx the flow worker is triggered. When running high
throughput data this causes an excessive amount of times the worker
gets activated. This patch starts scheduling the worker more relaxed
once outstanding tx has reached a certain depth.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 .../net/wireless/brcm80211/brcmfmac/commonring.h   |  2 ++
 drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c   | 30 +++++++++++++++++-----
 2 files changed, 26 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/commonring.h b/drivers/net/wireless/brcm80211/brcmfmac/commonring.h
index 002336e..3d40401 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/commonring.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/commonring.h
@@ -37,6 +37,8 @@ struct brcmf_commonring {
 	unsigned long flags;
 	bool inited;
 	bool was_full;
+
+	atomic_t outstanding_tx;
 };
 
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
index ee147f5..6262612 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/msgbuf.c
@@ -73,6 +73,8 @@
 #define BRCMF_MSGBUF_TX_FLUSH_CNT1		32
 #define BRCMF_MSGBUF_TX_FLUSH_CNT2		96
 
+#define BRCMF_MSGBUF_DELAY_TXWORKER_THRS	64
+#define BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS	32
 
 struct msgbuf_common_hdr {
 	u8				msgtype;
@@ -749,6 +751,7 @@ static void brcmf_msgbuf_txflow(struct brcmf_msgbuf *msgbuf, u8 flowid)
 		tx_msghdr->metadata_buf_len = 0;
 		tx_msghdr->metadata_buf_addr.high_addr = 0;
 		tx_msghdr->metadata_buf_addr.low_addr = 0;
+		atomic_inc(&commonring->outstanding_tx);
 		if (count >= BRCMF_MSGBUF_TX_FLUSH_CNT2) {
 			brcmf_commonring_write_complete(commonring);
 			count = 0;
@@ -773,10 +776,16 @@ static void brcmf_msgbuf_txflow_worker(struct work_struct *worker)
 }
 
 
-static int brcmf_msgbuf_schedule_txdata(struct brcmf_msgbuf *msgbuf, u32 flowid)
+static int brcmf_msgbuf_schedule_txdata(struct brcmf_msgbuf *msgbuf, u32 flowid,
+					bool force)
 {
+	struct brcmf_commonring *commonring;
+
 	set_bit(flowid, msgbuf->flow_map);
-	queue_work(msgbuf->txflow_wq, &msgbuf->txflow_work);
+	commonring = msgbuf->flowrings[flowid];
+	if ((force) || (atomic_read(&commonring->outstanding_tx) <
+			BRCMF_MSGBUF_DELAY_TXWORKER_THRS))
+		queue_work(msgbuf->txflow_wq, &msgbuf->txflow_work);
 
 	return 0;
 }
@@ -797,7 +806,7 @@ static int brcmf_msgbuf_txdata(struct brcmf_pub *drvr, int ifidx,
 			return -ENOMEM;
 	}
 	brcmf_flowring_enqueue(flow, flowid, skb);
-	brcmf_msgbuf_schedule_txdata(msgbuf, flowid);
+	brcmf_msgbuf_schedule_txdata(msgbuf, flowid, false);
 
 	return 0;
 }
@@ -854,6 +863,7 @@ brcmf_msgbuf_process_ioctl_complete(struct brcmf_msgbuf *msgbuf, void *buf)
 static void
 brcmf_msgbuf_process_txstatus(struct brcmf_msgbuf *msgbuf, void *buf)
 {
+	struct brcmf_commonring *commonring;
 	struct msgbuf_tx_status *tx_status;
 	u32 idx;
 	struct sk_buff *skb;
@@ -871,6 +881,8 @@ brcmf_msgbuf_process_txstatus(struct brcmf_msgbuf *msgbuf, void *buf)
 	}
 
 	set_bit(flowid, msgbuf->txstatus_done_map);
+	commonring = msgbuf->flowrings[flowid];
+	atomic_dec(&commonring->outstanding_tx);
 
 	brcmf_txfinalize(msgbuf->drvr, skb, tx_status->msg.ifidx, true);
 }
@@ -1181,7 +1193,7 @@ brcmf_msgbuf_process_flow_ring_create_response(struct brcmf_msgbuf *msgbuf,
 
 	brcmf_flowring_open(msgbuf->flow, flowid);
 
-	brcmf_msgbuf_schedule_txdata(msgbuf, flowid);
+	brcmf_msgbuf_schedule_txdata(msgbuf, flowid, true);
 }
 
 
@@ -1280,8 +1292,10 @@ int brcmf_proto_msgbuf_rx_trigger(struct device *dev)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_pub *drvr = bus_if->drvr;
 	struct brcmf_msgbuf *msgbuf = (struct brcmf_msgbuf *)drvr->proto->pd;
+	struct brcmf_commonring *commonring;
 	void *buf;
 	u32 flowid;
+	int qlen;
 
 	buf = msgbuf->commonrings[BRCMF_D2H_MSGRING_RX_COMPLETE];
 	brcmf_msgbuf_process_rx(msgbuf, buf);
@@ -1293,8 +1307,12 @@ int brcmf_proto_msgbuf_rx_trigger(struct device *dev)
 	for_each_set_bit(flowid, msgbuf->txstatus_done_map,
 			 msgbuf->nrof_flowrings) {
 		clear_bit(flowid, msgbuf->txstatus_done_map);
-		if (brcmf_flowring_qlen(msgbuf->flow, flowid))
-			brcmf_msgbuf_schedule_txdata(msgbuf, flowid);
+		commonring = msgbuf->flowrings[flowid];
+		qlen = brcmf_flowring_qlen(msgbuf->flow, flowid);
+		if ((qlen > BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS) ||
+		    ((qlen) && (atomic_read(&commonring->outstanding_tx) <
+				BRCMF_MSGBUF_TRICKLE_TXWORKER_THRS)))
+			brcmf_msgbuf_schedule_txdata(msgbuf, flowid, true);
 	}
 
 	return 0;
-- 
cgit v1.1


From 69d03ee0b709a282f81e9f81c1359cffe1edcd2b Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:31 +0100
Subject: brcmfmac: prevent possible deadlock on resuming SDIO device.

When the system is resumed a deadlock can occur when DPC gets
entered before resume is complete. This patch fixes this by
properly checking the suspend state outside the claim_host code
block.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 33 ------------------------
 drivers/net/wireless/brcm80211/brcmfmac/sdio.c   | 18 +++++++++++++
 drivers/net/wireless/brcm80211/brcmfmac/sdio.h   |  2 --
 3 files changed, 18 insertions(+), 35 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 00ba90b8..8ba60f6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -97,25 +97,6 @@ static void brcmf_sdiod_dummy_irqhandler(struct sdio_func *func)
 {
 }
 
-static bool brcmf_sdiod_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
-{
-	bool is_err = false;
-#ifdef CONFIG_PM_SLEEP
-	is_err = atomic_read(&sdiodev->suspend);
-#endif
-	return is_err;
-}
-
-static void brcmf_sdiod_pm_resume_wait(struct brcmf_sdio_dev *sdiodev,
-				       wait_queue_head_t *wq)
-{
-#ifdef CONFIG_PM_SLEEP
-	int retry = 0;
-	while (atomic_read(&sdiodev->suspend) && retry++ != 30)
-		wait_event_timeout(*wq, false, HZ/100);
-#endif
-}
-
 int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret = 0;
@@ -244,10 +225,6 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
 	brcmf_dbg(SDIO, "rw=%d, func=%d, addr=0x%05x, nbytes=%d\n",
 		  write, fn, addr, regsz);
 
-	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_word_wait);
-	if (brcmf_sdiod_pm_resume_error(sdiodev))
-		return -EIO;
-
 	/* only allow byte access on F0 */
 	if (WARN_ON(regsz > 1 && !fn))
 		return -EINVAL;
@@ -462,10 +439,6 @@ static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	unsigned int req_sz;
 	int err;
 
-	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
-	if (brcmf_sdiod_pm_resume_error(sdiodev))
-		return -EIO;
-
 	/* Single skb use the standard mmc interface */
 	req_sz = pkt->len + 3;
 	req_sz &= (uint)~3;
@@ -516,10 +489,6 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 	if (!pktlist->qlen)
 		return -EINVAL;
 
-	brcmf_sdiod_pm_resume_wait(sdiodev, &sdiodev->request_buffer_wait);
-	if (brcmf_sdiod_pm_resume_error(sdiodev))
-		return -EIO;
-
 	target_list = pktlist;
 	/* for host with broken sg support, prepare a page aligned list */
 	__skb_queue_head_init(&local_list);
@@ -1077,8 +1046,6 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 #endif
 
 	atomic_set(&sdiodev->suspend, false);
-	init_waitqueue_head(&sdiodev->request_word_wait);
-	init_waitqueue_head(&sdiodev->request_buffer_wait);
 
 	brcmf_dbg(SDIO, "F2 found, calling brcmf_sdiod_probe...\n");
 	err = brcmf_sdiod_probe(sdiodev);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
index 99a3776..2c4f0cc 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -2609,6 +2609,21 @@ static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
 	return ret;
 }
 
+static int brcmf_sdio_pm_resume_wait(struct brcmf_sdio_dev *sdiodev)
+{
+#ifdef CONFIG_PM_SLEEP
+	int retry;
+
+	/* Wait for possible resume to complete */
+	retry = 0;
+	while ((atomic_read(&sdiodev->suspend)) && (retry++ != 50))
+		msleep(20);
+	if (atomic_read(&sdiodev->suspend))
+		return -EIO;
+#endif
+	return 0;
+}
+
 static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 {
 	u32 newstatus = 0;
@@ -2619,6 +2634,9 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 
 	brcmf_dbg(TRACE, "Enter\n");
 
+	if (brcmf_sdio_pm_resume_wait(bus->sdiodev))
+		return;
+
 	sdio_claim_host(bus->sdiodev->func[1]);
 
 	/* If waiting for HTAVAIL, check status */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
index 8eb4262..82494df 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
@@ -169,8 +169,6 @@ struct brcmf_sdio_dev {
 	u32 sbwad;			/* Save backplane window address */
 	struct brcmf_sdio *bus;
 	atomic_t suspend;		/* suspend flag */
-	wait_queue_head_t request_word_wait;
-	wait_queue_head_t request_buffer_wait;
 	struct device *dev;
 	struct brcmf_bus *bus_if;
 	struct brcmfmac_sdio_platform_data *pdata;
-- 
cgit v1.1


From 4dd8b26a40acf8450835d27bf922be145f7bd206 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:32 +0100
Subject: brcmfmac: use SDIO DPC for control frames.

Control frames are normally handled outside DPC, but sometimes
within DPC. To simplify code always handle control within DPC.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/sdio.c | 87 ++++++++++----------------
 1 file changed, 33 insertions(+), 54 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
index 2c4f0cc..b4f5fe5 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -44,7 +44,8 @@
 #include "chip.h"
 #include "firmware.h"
 
-#define DCMD_RESP_TIMEOUT  2000	/* In milli second */
+#define DCMD_RESP_TIMEOUT	2000	/* In milli second */
+#define CTL_DONE_TIMEOUT	2000	/* In milli second */
 
 #ifdef DEBUG
 
@@ -495,9 +496,9 @@ struct brcmf_sdio {
 	u8 *ctrl_frame_buf;
 	u16 ctrl_frame_len;
 	bool ctrl_frame_stat;
+	int ctrl_frame_err;
 
 	spinlock_t txq_lock;		/* protect bus->txq */
-	struct semaphore tx_seq_lock;	/* protect bus->tx_seq */
 	wait_queue_head_t ctrl_wait;
 	wait_queue_head_t dcmd_resp_wait;
 
@@ -2376,8 +2377,6 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 	/* Send frames until the limit or some other event */
 	for (cnt = 0; (cnt < maxframes) && data_ok(bus);) {
 		pkt_num = 1;
-		if (down_interruptible(&bus->tx_seq_lock))
-			return cnt;
 		if (bus->txglom)
 			pkt_num = min_t(u8, bus->tx_max - bus->tx_seq,
 					bus->sdiodev->txglomsz);
@@ -2393,13 +2392,10 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 			__skb_queue_tail(&pktq, pkt);
 		}
 		spin_unlock_bh(&bus->txq_lock);
-		if (i == 0) {
-			up(&bus->tx_seq_lock);
+		if (i == 0)
 			break;
-		}
 
 		ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL);
-		up(&bus->tx_seq_lock);
 
 		cnt += i;
 
@@ -2743,17 +2739,14 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 	brcmf_sdio_clrintr(bus);
 
 	if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
-	    (down_interruptible(&bus->tx_seq_lock) == 0)) {
-		if (data_ok(bus)) {
-			sdio_claim_host(bus->sdiodev->func[1]);
-			err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
-						      bus->ctrl_frame_len);
-			sdio_release_host(bus->sdiodev->func[1]);
-
-			bus->ctrl_frame_stat = false;
-			brcmf_sdio_wait_event_wakeup(bus);
-		}
-		up(&bus->tx_seq_lock);
+	    data_ok(bus)) {
+		sdio_claim_host(bus->sdiodev->func[1]);
+		err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
+					      bus->ctrl_frame_len);
+		sdio_release_host(bus->sdiodev->func[1]);
+		bus->ctrl_frame_err = err;
+		bus->ctrl_frame_stat = false;
+		brcmf_sdio_wait_event_wakeup(bus);
 	}
 	/* Send queued frames (limit 1 if rx may still be pending) */
 	if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
@@ -2965,43 +2958,30 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
 	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
 	struct brcmf_sdio *bus = sdiodev->bus;
-	int ret = -1;
+	int ret;
 
 	brcmf_dbg(TRACE, "Enter\n");
 
-	if (down_interruptible(&bus->tx_seq_lock))
-		return -EINTR;
-
-	if (!data_ok(bus)) {
-		brcmf_dbg(INFO, "No bus credit bus->tx_max %d, bus->tx_seq %d\n",
-			  bus->tx_max, bus->tx_seq);
-		up(&bus->tx_seq_lock);
-		/* Send from dpc */
-		bus->ctrl_frame_buf = msg;
-		bus->ctrl_frame_len = msglen;
-		bus->ctrl_frame_stat = true;
-
-		wait_event_interruptible_timeout(bus->ctrl_wait,
-						 !bus->ctrl_frame_stat,
-						 msecs_to_jiffies(2000));
-
-		if (!bus->ctrl_frame_stat) {
-			brcmf_dbg(SDIO, "ctrl_frame_stat == false\n");
-			ret = 0;
-		} else {
-			brcmf_dbg(SDIO, "ctrl_frame_stat == true\n");
-			bus->ctrl_frame_stat = false;
-			if (down_interruptible(&bus->tx_seq_lock))
-				return -EINTR;
-			ret = -1;
-		}
+	/* Send from dpc */
+	bus->ctrl_frame_buf = msg;
+	bus->ctrl_frame_len = msglen;
+	bus->ctrl_frame_stat = true;
+	if (atomic_read(&bus->dpc_tskcnt) == 0) {
+		atomic_inc(&bus->dpc_tskcnt);
+		queue_work(bus->brcmf_wq, &bus->datawork);
 	}
-	if (ret == -1) {
-		sdio_claim_host(bus->sdiodev->func[1]);
-		brcmf_sdio_bus_sleep(bus, false, false);
-		ret = brcmf_sdio_tx_ctrlframe(bus, msg, msglen);
-		sdio_release_host(bus->sdiodev->func[1]);
-		up(&bus->tx_seq_lock);
+
+	wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat,
+					 msecs_to_jiffies(CTL_DONE_TIMEOUT));
+
+	if (!bus->ctrl_frame_stat) {
+		brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
+			  bus->ctrl_frame_err);
+		ret = bus->ctrl_frame_err;
+	} else {
+		brcmf_dbg(SDIO, "ctrl_frame timeout\n");
+		bus->ctrl_frame_stat = false;
+		ret = -ETIMEDOUT;
 	}
 
 	if (ret)
@@ -3009,7 +2989,7 @@ brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
 	else
 		bus->sdcnt.tx_ctlpkts++;
 
-	return ret ? -EIO : 0;
+	return ret;
 }
 
 #ifdef DEBUG
@@ -4165,7 +4145,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 
 	spin_lock_init(&bus->rxctl_lock);
 	spin_lock_init(&bus->txq_lock);
-	sema_init(&bus->tx_seq_lock, 1);
 	init_waitqueue_head(&bus->ctrl_wait);
 	init_waitqueue_head(&bus->dcmd_resp_wait);
 
-- 
cgit v1.1


From 9b7a0ddc6073909bc61399ca3b8126ef886d5e8a Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:33 +0100
Subject: brcmfmac: pass DEAUTH/DISASSOC reason code to user-space

The driver always called cfg80211_disconnected() with reason parameter
set to zero, ie. unknown. However, firmware does provide a valid
802.11 reason code in DEAUTH and DISASSOC event message to the driver.
This patch passes the reason code to cfg80211_disconnected().

Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c | 31 +++++++++++++++++-----
 1 file changed, 25 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
index 5eba81b..b59b8c6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/cfg80211.c
@@ -1229,7 +1229,25 @@ static void brcmf_init_prof(struct brcmf_cfg80211_profile *prof)
 	memset(prof, 0, sizeof(*prof));
 }
 
-static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
+static u16 brcmf_map_fw_linkdown_reason(const struct brcmf_event_msg *e)
+{
+	u16 reason;
+
+	switch (e->event_code) {
+	case BRCMF_E_DEAUTH:
+	case BRCMF_E_DEAUTH_IND:
+	case BRCMF_E_DISASSOC_IND:
+		reason = e->reason;
+		break;
+	case BRCMF_E_LINK:
+	default:
+		reason = 0;
+		break;
+	}
+	return reason;
+}
+
+static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason)
 {
 	struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
 	s32 err = 0;
@@ -1244,7 +1262,8 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
 			brcmf_err("WLC_DISASSOC failed (%d)\n", err);
 		}
 		clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state);
-		cfg80211_disconnected(vif->wdev.netdev, 0, NULL, 0, GFP_KERNEL);
+		cfg80211_disconnected(vif->wdev.netdev, reason, NULL, 0,
+				      GFP_KERNEL);
 
 	}
 	clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state);
@@ -1414,7 +1433,7 @@ brcmf_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *ndev)
 	if (!check_vif_up(ifp->vif))
 		return -EIO;
 
-	brcmf_link_down(ifp->vif);
+	brcmf_link_down(ifp->vif, WLAN_REASON_DEAUTH_LEAVING);
 
 	brcmf_dbg(TRACE, "Exit\n");
 
@@ -3041,7 +3060,7 @@ static s32 brcmf_cfg80211_suspend(struct wiphy *wiphy,
 			 * disassociate from AP to save power while system is
 			 * in suspended state
 			 */
-			brcmf_link_down(vif);
+			brcmf_link_down(vif, WLAN_REASON_UNSPECIFIED);
 			/* Make sure WPA_Supplicant receives all the event
 			 * generated due to DISASSOC call to the fw to keep
 			 * the state fw and WPA_Supplicant state consistent
@@ -4927,7 +4946,7 @@ brcmf_notify_connect_status(struct brcmf_if *ifp,
 		if (!brcmf_is_ibssmode(ifp->vif)) {
 			brcmf_bss_connect_done(cfg, ndev, e, false);
 		}
-		brcmf_link_down(ifp->vif);
+		brcmf_link_down(ifp->vif, brcmf_map_fw_linkdown_reason(e));
 		brcmf_init_prof(ndev_to_prof(ndev));
 		if (ndev != cfg_to_ndev(cfg))
 			complete(&cfg->vif_disabled);
@@ -5868,7 +5887,7 @@ static s32 __brcmf_cfg80211_down(struct brcmf_if *ifp)
 	 * from AP to save power
 	 */
 	if (check_vif_up(ifp->vif)) {
-		brcmf_link_down(ifp->vif);
+		brcmf_link_down(ifp->vif, WLAN_REASON_UNSPECIFIED);
 
 		/* Make sure WPA_Supplicant receives all the event
 		   generated due to DISASSOC call to the fw to keep
-- 
cgit v1.1


From 8982cd40ace9b7f109ac8c63e6763409e39feb55 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:34 +0100
Subject: brcmfmac: wait for driver to go idle during suspend

Before going in suspend state the watchdog thread needs to put the
device in bus sleep state, which assures it can go in deep-sleep
state during D3 state.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 20 +++++++++++++++-----
 drivers/net/wireless/brcm80211/brcmfmac/sdio.c   | 18 ++++++++----------
 drivers/net/wireless/brcm80211/brcmfmac/sdio.h   |  2 ++
 3 files changed, 25 insertions(+), 15 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 8ba60f6..9afaeb6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -1045,7 +1045,9 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 		bus_if->wowl_supported = true;
 #endif
 
+	sdiodev->sleeping = false;
 	atomic_set(&sdiodev->suspend, false);
+	init_waitqueue_head(&sdiodev->idle_wait);
 
 	brcmf_dbg(SDIO, "F2 found, calling brcmf_sdiod_probe...\n");
 	err = brcmf_sdiod_probe(sdiodev);
@@ -1107,12 +1109,23 @@ void brcmf_sdio_wowl_config(struct device *dev, bool enabled)
 #ifdef CONFIG_PM_SLEEP
 static int brcmf_ops_sdio_suspend(struct device *dev)
 {
-	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
+	struct brcmf_bus *bus_if;
+	struct brcmf_sdio_dev *sdiodev;
 	mmc_pm_flag_t sdio_flags;
 
 	brcmf_dbg(SDIO, "Enter\n");
 
+	bus_if = dev_get_drvdata(dev);
+	sdiodev = bus_if->bus_priv.sdio;
+
+	/* wait for watchdog to go idle */
+	if (wait_event_timeout(sdiodev->idle_wait, sdiodev->sleeping,
+			       msecs_to_jiffies(3 * BRCMF_WD_POLL_MS)) == 0) {
+		brcmf_err("bus still active\n");
+		return -EBUSY;
+	}
+	/* disable watchdog */
+	brcmf_sdio_wd_timer(sdiodev->bus, 0);
 	atomic_set(&sdiodev->suspend, true);
 
 	if (sdiodev->wowl_enabled) {
@@ -1124,9 +1137,6 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
 		if (sdio_set_host_pm_flags(sdiodev->func[1], sdio_flags))
 			brcmf_err("Failed to set pm_flags %x\n", sdio_flags);
 	}
-
-	brcmf_sdio_wd_timer(sdiodev->bus, 0);
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
index b4f5fe5..488a0f6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -515,7 +515,6 @@ struct brcmf_sdio {
 	bool txoff;		/* Transmit flow-controlled */
 	struct brcmf_sdio_count sdcnt;
 	bool sr_enabled; /* SaveRestore enabled */
-	bool sleeping; /* SDIO bus sleeping */
 
 	u8 tx_hdrlen;		/* sdio bus header length for tx packet */
 	bool txglom;		/* host tx glomming enable flag */
@@ -1014,12 +1013,12 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 
 	brcmf_dbg(SDIO, "Enter: request %s currently %s\n",
 		  (sleep ? "SLEEP" : "WAKE"),
-		  (bus->sleeping ? "SLEEP" : "WAKE"));
+		  (bus->sdiodev->sleeping ? "SLEEP" : "WAKE"));
 
 	/* If SR is enabled control bus state with KSO */
 	if (bus->sr_enabled) {
 		/* Done if we're already in the requested state */
-		if (sleep == bus->sleeping)
+		if (sleep == bus->sdiodev->sleeping)
 			goto end;
 
 		/* Going to sleep */
@@ -1051,12 +1050,7 @@ brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 			bus->idlecount = 0;
 			err = brcmf_sdio_kso_control(bus, true);
 		}
-		if (!err) {
-			/* Change state */
-			bus->sleeping = sleep;
-			brcmf_dbg(SDIO, "new state %s\n",
-				  (sleep ? "SLEEP" : "WAKE"));
-		} else {
+		if (err) {
 			brcmf_err("error while changing bus sleep state %d\n",
 				  err);
 			goto done;
@@ -1071,6 +1065,11 @@ end:
 	} else {
 		brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
 	}
+	bus->sdiodev->sleeping = sleep;
+	if (sleep)
+		wake_up(&bus->sdiodev->idle_wait);
+	brcmf_dbg(SDIO, "new state %s\n",
+		  (sleep ? "SLEEP" : "WAKE"));
 done:
 	brcmf_dbg(SDIO, "Exit: err=%d\n", err);
 	return err;
@@ -4215,7 +4214,6 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
 	bus->idleclock = BRCMF_IDLE_ACTIVE;
 
 	/* SR state */
-	bus->sleeping = false;
 	bus->sr_enabled = false;
 
 	brcmf_sdio_debugfs_create(bus);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
index 82494df..9c5d42d2 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
@@ -169,6 +169,8 @@ struct brcmf_sdio_dev {
 	u32 sbwad;			/* Save backplane window address */
 	struct brcmf_sdio *bus;
 	atomic_t suspend;		/* suspend flag */
+	bool sleeping;
+	wait_queue_head_t idle_wait;
 	struct device *dev;
 	struct brcmf_bus *bus_if;
 	struct brcmfmac_sdio_platform_data *pdata;
-- 
cgit v1.1


From a1cee865c3e79b71c10cd6a3de03d0dd73f7bdd9 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:35 +0100
Subject: brcmfmac: SDIO: avoid using bus state for private states.

Each bus driver is maintaing an exported bus state indicating
if upper layers can or cannot send data. SDIO is using this state
also for more private states. This makes handling the states and
state changes complex. This patch minimises the exposed states
and makes SDIO keep track of an internal state where necessary.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 17 +++++----
 drivers/net/wireless/brcm80211/brcmfmac/bus.h    | 14 +-------
 drivers/net/wireless/brcm80211/brcmfmac/core.c   |  6 ++--
 drivers/net/wireless/brcm80211/brcmfmac/fwil.c   |  2 +-
 drivers/net/wireless/brcm80211/brcmfmac/pcie.c   |  2 +-
 drivers/net/wireless/brcm80211/brcmfmac/sdio.c   | 45 +++++++++---------------
 drivers/net/wireless/brcm80211/brcmfmac/sdio.h   |  8 +++++
 drivers/net/wireless/brcm80211/brcmfmac/usb.c    |  2 +-
 8 files changed, 43 insertions(+), 53 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index 9afaeb6..7944224 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -269,6 +269,12 @@ static int brcmf_sdiod_request_data(struct brcmf_sdio_dev *sdiodev, u8 fn,
 	return ret;
 }
 
+static void brcmf_sdiod_nomedium_state(struct brcmf_sdio_dev *sdiodev)
+{
+	sdiodev->state = BRCMF_STATE_NOMEDIUM;
+	brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_DOWN);
+}
+
 static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 				   u8 regsz, void *data, bool write)
 {
@@ -276,7 +282,7 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 	s32 retry = 0;
 	int ret;
 
-	if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM)
+	if (sdiodev->state == BRCMF_STATE_NOMEDIUM)
 		return -ENOMEDIUM;
 
 	/*
@@ -302,7 +308,7 @@ static int brcmf_sdiod_regrw_helper(struct brcmf_sdio_dev *sdiodev, u32 addr,
 		 retry++ < SDIOH_API_ACCESS_RETRY_LIMIT);
 
 	if (ret == -ENOMEDIUM)
-		brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
+		brcmf_sdiod_nomedium_state(sdiodev);
 	else if (ret != 0) {
 		/*
 		 * SleepCSR register access can fail when
@@ -325,7 +331,7 @@ brcmf_sdiod_set_sbaddr_window(struct brcmf_sdio_dev *sdiodev, u32 address)
 	int err = 0, i;
 	u8 addr[3];
 
-	if (sdiodev->bus_if->state == BRCMF_BUS_NOMEDIUM)
+	if (sdiodev->state == BRCMF_STATE_NOMEDIUM)
 		return -ENOMEDIUM;
 
 	addr[0] = (address >> 8) & SBSDIO_SBADDRLOW_MASK;
@@ -454,7 +460,7 @@ static int brcmf_sdiod_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 		err = sdio_readsb(sdiodev->func[fn], ((u8 *)(pkt->data)), addr,
 				  req_sz);
 	if (err == -ENOMEDIUM)
-		brcmf_bus_change_state(sdiodev->bus_if, BRCMF_BUS_NOMEDIUM);
+		brcmf_sdiod_nomedium_state(sdiodev);
 	return err;
 }
 
@@ -589,8 +595,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
 
 		ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error;
 		if (ret == -ENOMEDIUM) {
-			brcmf_bus_change_state(sdiodev->bus_if,
-					       BRCMF_BUS_NOMEDIUM);
+			brcmf_sdiod_nomedium_state(sdiodev);
 			break;
 		} else if (ret != 0) {
 			brcmf_err("CMD53 sg block %s failed %d\n",
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/brcm80211/brcmfmac/bus.h
index ef344e4..55d36ff 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bus.h
@@ -33,11 +33,8 @@
 
 /* The level of bus communication with the dongle */
 enum brcmf_bus_state {
-	BRCMF_BUS_UNKNOWN,	/* Not determined yet */
-	BRCMF_BUS_NOMEDIUM,	/* No medium access to dongle */
 	BRCMF_BUS_DOWN,		/* Not ready for frame transfers */
-	BRCMF_BUS_LOAD,		/* Download access only (CPU reset) */
-	BRCMF_BUS_DATA		/* Ready for frame transfers */
+	BRCMF_BUS_UP		/* Ready for frame transfers */
 };
 
 /* The level of bus communication with the dongle */
@@ -188,18 +185,9 @@ void brcmf_bus_wowl_config(struct brcmf_bus *bus, bool enabled)
 		bus->ops->wowl_config(bus->dev, enabled);
 }
 
-static inline bool brcmf_bus_ready(struct brcmf_bus *bus)
-{
-	return bus->state == BRCMF_BUS_LOAD || bus->state == BRCMF_BUS_DATA;
-}
-
 static inline void brcmf_bus_change_state(struct brcmf_bus *bus,
 					  enum brcmf_bus_state new_state)
 {
-	/* NOMEDIUM is permanent */
-	if (bus->state == BRCMF_BUS_NOMEDIUM)
-		return;
-
 	brcmf_dbg(TRACE, "%d -> %d\n", bus->state, new_state);
 	bus->state = new_state;
 }
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/core.c b/drivers/net/wireless/brcm80211/brcmfmac/core.c
index e2a9e33..ff8c97b 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
@@ -197,7 +197,7 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
 	brcmf_dbg(DATA, "Enter, idx=%d\n", ifp->bssidx);
 
 	/* Can the device send data? */
-	if (drvr->bus_if->state != BRCMF_BUS_DATA) {
+	if (drvr->bus_if->state != BRCMF_BUS_UP) {
 		brcmf_err("xmit rejected state=%d\n", drvr->bus_if->state);
 		netif_stop_queue(ndev);
 		dev_kfree_skb(skb);
@@ -637,7 +637,7 @@ static int brcmf_netdev_open(struct net_device *ndev)
 	brcmf_dbg(TRACE, "Enter, idx=%d\n", ifp->bssidx);
 
 	/* If bus is not ready, can't continue */
-	if (bus_if->state != BRCMF_BUS_DATA) {
+	if (bus_if->state != BRCMF_BUS_UP) {
 		brcmf_err("failed bus is not ready\n");
 		return -EAGAIN;
 	}
@@ -964,7 +964,7 @@ int brcmf_bus_start(struct device *dev)
 		p2p_ifp = NULL;
 
 	/* signal bus ready */
-	brcmf_bus_change_state(bus_if, BRCMF_BUS_DATA);
+	brcmf_bus_change_state(bus_if, BRCMF_BUS_UP);
 
 	/* Bus is ready, do any initialization */
 	ret = brcmf_c_preinit_dcmds(ifp);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
index 03f2c40..dcfa0bb 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.c
@@ -109,7 +109,7 @@ brcmf_fil_cmd_data(struct brcmf_if *ifp, u32 cmd, void *data, u32 len, bool set)
 	struct brcmf_pub *drvr = ifp->drvr;
 	s32 err;
 
-	if (drvr->bus_if->state != BRCMF_BUS_DATA) {
+	if (drvr->bus_if->state != BRCMF_BUS_UP) {
 		brcmf_err("bus is down. we have nothing to do.\n");
 		return -EIO;
 	}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
index e91fa9a..61c053a 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/pcie.c
@@ -1828,7 +1828,7 @@ static int brcmf_pcie_resume(struct pci_dev *pdev)
 				goto cleanup;
 			brcmf_dbg(PCIE, "Hot resume, continue....\n");
 			brcmf_pcie_select_core(devinfo, BCMA_CORE_PCIE2);
-			brcmf_bus_change_state(bus, BRCMF_BUS_DATA);
+			brcmf_bus_change_state(bus, BRCMF_BUS_UP);
 			brcmf_pcie_intr_enable(devinfo);
 			return 0;
 		}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
index 488a0f6..5e9d208 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -1909,7 +1909,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
 	bus->rxpending = true;
 
 	for (rd->seq_num = bus->rx_seq, rxleft = maxframes;
-	     !bus->rxskip && rxleft && brcmf_bus_ready(bus->sdiodev->bus_if);
+	     !bus->rxskip && rxleft && bus->sdiodev->state == BRCMF_STATE_DATA;
 	     rd->seq_num++, rxleft--) {
 
 		/* Handle glomming separately */
@@ -2415,7 +2415,7 @@ static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
 	}
 
 	/* Deflow-control stack if needed */
-	if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DATA) &&
+	if ((bus->sdiodev->state == BRCMF_STATE_DATA) &&
 	    bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
 		bus->txoff = false;
 		brcmf_txflowblock(bus->sdiodev->dev, false);
@@ -2503,7 +2503,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 		bus->watchdog_tsk = NULL;
 	}
 
-	if (bus_if->state == BRCMF_BUS_DOWN) {
+	if (sdiodev->state != BRCMF_STATE_NOMEDIUM) {
 		sdio_claim_host(sdiodev->func[1]);
 
 		/* Enable clock for device interrupts */
@@ -2756,7 +2756,7 @@ static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
 		brcmf_sdio_sendfromq(bus, framecnt);
 	}
 
-	if (!brcmf_bus_ready(bus->sdiodev->bus_if) || (err != 0)) {
+	if ((bus->sdiodev->state != BRCMF_STATE_DATA) || (err != 0)) {
 		brcmf_err("failed backplane access over SDIO, halting operation\n");
 		atomic_set(&bus->intstatus, 0);
 	} else if (atomic_read(&bus->intstatus) ||
@@ -3411,8 +3411,8 @@ static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
 		goto err;
 	}
 
-	/* Allow HT Clock now that the ARM is running. */
-	brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_LOAD);
+	/* Allow full data communication using DPC from now on. */
+	bus->sdiodev->state = BRCMF_STATE_DATA;
 	bcmerror = 0;
 
 err:
@@ -3558,7 +3558,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus)
 		return;
 	}
 
-	if (!brcmf_bus_ready(bus->sdiodev->bus_if)) {
+	if (bus->sdiodev->state != BRCMF_STATE_DATA) {
 		brcmf_err("bus is down. we have nothing to do\n");
 		return;
 	}
@@ -3581,10 +3581,6 @@ void brcmf_sdio_isr(struct brcmf_sdio *bus)
 
 static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 {
-#ifdef DEBUG
-	struct brcmf_bus *bus_if = dev_get_drvdata(bus->sdiodev->dev);
-#endif	/* DEBUG */
-
 	brcmf_dbg(TIMER, "Enter\n");
 
 	/* Poll period: check device if appropriate. */
@@ -3628,7 +3624,7 @@ static bool brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
 	}
 #ifdef DEBUG
 	/* Poll for console output periodically */
-	if (bus_if && bus_if->state == BRCMF_BUS_DATA &&
+	if (bus->sdiodev->state == BRCMF_STATE_DATA &&
 	    bus->console_interval != 0) {
 		bus->console.count += BRCMF_WD_POLL_MS;
 		if (bus->console.count >= bus->console_interval) {
@@ -3869,11 +3865,6 @@ brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
 		goto fail;
 	}
 
-	/* SDIO register access works so moving
-	 * state from UNKNOWN to DOWN.
-	 */
-	brcmf_bus_change_state(bus->sdiodev->bus_if, BRCMF_BUS_DOWN);
-
 	bus->ci = brcmf_chip_attach(bus->sdiodev, &brcmf_sdio_buscore_ops);
 	if (IS_ERR(bus->ci)) {
 		brcmf_err("brcmf_chip_attach failed!\n");
@@ -4007,18 +3998,16 @@ static void brcmf_sdio_firmware_callback(struct device *dev,
 
 	brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev));
 
-	/* try to download image and nvram to the dongle */
-	if (bus_if->state == BRCMF_BUS_DOWN) {
-		bus->alp_only = true;
-		err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
-		if (err)
-			goto fail;
-		bus->alp_only = false;
-	}
-
 	if (!bus_if->drvr)
 		return;
 
+	/* try to download image and nvram to the dongle */
+	bus->alp_only = true;
+	err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
+	if (err)
+		goto fail;
+	bus->alp_only = false;
+
 	/* Start the watchdog timer */
 	bus->sdcnt.tickcnt = 0;
 	brcmf_sdio_wd_timer(bus, BRCMF_WD_POLL_MS);
@@ -4254,7 +4243,7 @@ void brcmf_sdio_remove(struct brcmf_sdio *bus)
 			destroy_workqueue(bus->brcmf_wq);
 
 		if (bus->ci) {
-			if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
+			if (bus->sdiodev->state != BRCMF_STATE_NOMEDIUM) {
 				sdio_claim_host(bus->sdiodev->func[1]);
 				brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
 				/* Leave the device in state where it is
@@ -4289,7 +4278,7 @@ void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, uint wdtick)
 	}
 
 	/* don't start the wd until fw is loaded */
-	if (bus->sdiodev->bus_if->state != BRCMF_BUS_DATA)
+	if (bus->sdiodev->state != BRCMF_STATE_DATA)
 		return;
 
 	if (wdtick) {
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
index 9c5d42d2..ec2586a 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.h
@@ -155,6 +155,13 @@
 /* watchdog polling interval in ms */
 #define BRCMF_WD_POLL_MS	10
 
+/* The state of the bus */
+enum brcmf_sdio_state {
+	BRCMF_STATE_DOWN,	/* Device available, still initialising */
+	BRCMF_STATE_DATA,	/* Ready for data transfers, DPC enabled */
+	BRCMF_STATE_NOMEDIUM	/* No medium access to dongle possible */
+};
+
 struct brcmf_sdreg {
 	int func;
 	int offset;
@@ -187,6 +194,7 @@ struct brcmf_sdio_dev {
 	char fw_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
 	char nvram_name[BRCMF_FW_PATH_LEN + BRCMF_FW_NAME_LEN];
 	bool wowl_enabled;
+	enum brcmf_sdio_state state;
 };
 
 /* sdio core registers */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 4572def..7e0c9e2 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -576,7 +576,7 @@ brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
 		brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DOWN);
 	} else if (state == BRCMFMAC_USB_STATE_UP) {
 		brcmf_dbg(USB, "DBUS is up\n");
-		brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_DATA);
+		brcmf_bus_change_state(bcmf_bus, BRCMF_BUS_UP);
 	} else {
 		brcmf_dbg(USB, "DBUS current state=%d\n", state);
 	}
-- 
cgit v1.1


From 649f38ae9e482098da94d30f7f802621e66c6b74 Mon Sep 17 00:00:00 2001
From: Hante Meuleman <meuleman@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:36 +0100
Subject: brcmfmac: Reopen netdev queue on bus state data.

During suspend the bus state is put in the down state. When data
is being transmitted during this state then the netdev queue will
be close. This patch will wake the queue on state data if the
queue was closed.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/bus.h  | 10 +++-------
 drivers/net/wireless/brcm80211/brcmfmac/core.c | 21 +++++++++++++++++++++
 2 files changed, 24 insertions(+), 7 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bus.h b/drivers/net/wireless/brcm80211/brcmfmac/bus.h
index 55d36ff..89e6a4d 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bus.h
@@ -185,13 +185,6 @@ void brcmf_bus_wowl_config(struct brcmf_bus *bus, bool enabled)
 		bus->ops->wowl_config(bus->dev, enabled);
 }
 
-static inline void brcmf_bus_change_state(struct brcmf_bus *bus,
-					  enum brcmf_bus_state new_state)
-{
-	brcmf_dbg(TRACE, "%d -> %d\n", bus->state, new_state);
-	bus->state = new_state;
-}
-
 /*
  * interface functions from common layer
  */
@@ -214,6 +207,9 @@ void brcmf_txflowblock(struct device *dev, bool state);
 /* Notify the bus has transferred the tx packet to firmware */
 void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success);
 
+/* Configure the "global" bus state used by upper layers */
+void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state);
+
 int brcmf_bus_start(struct device *dev);
 s32 brcmf_iovar_data_set(struct device *dev, char *name, void *data, u32 len);
 void brcmf_bus_add_txhdrlen(struct device *dev, uint len);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/core.c b/drivers/net/wireless/brcm80211/brcmfmac/core.c
index ff8c97b..b8520c3 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
@@ -1106,6 +1106,27 @@ int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp)
 	return !err;
 }
 
+void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state)
+{
+	struct brcmf_pub *drvr = bus->drvr;
+	struct net_device *ndev;
+	int ifidx;
+
+	brcmf_dbg(TRACE, "%d -> %d\n", bus->state, state);
+	bus->state = state;
+
+	if (state == BRCMF_BUS_UP) {
+		for (ifidx = 0; ifidx < BRCMF_MAX_IFS; ifidx++) {
+			if ((drvr->iflist[ifidx]) &&
+			    (drvr->iflist[ifidx]->ndev)) {
+				ndev = drvr->iflist[ifidx]->ndev;
+				if (netif_queue_stopped(ndev))
+					netif_wake_queue(ndev);
+			}
+		}
+	}
+}
+
 static void brcmf_driver_register(struct work_struct *work)
 {
 #ifdef CONFIG_BRCMFMAC_SDIO
-- 
cgit v1.1


From 86fec35e17c15f466ebf3f942b60d35d47929444 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:37 +0100
Subject: brcmfmac: do not load firmware when device is already running

In brcmf_usb_probe_cb() the device is checked to determine whether
it is already running firmware. However, when no firmware download
is needed it still continues to request the firmware files. This
is fixed by returning after successful setup.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/usb.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 7e0c9e2..1b95729 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -1263,6 +1263,8 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
 		ret = brcmf_usb_bus_setup(devinfo);
 		if (ret)
 			goto fail;
+		/* we are done */
+		return 0;
 	}
 	bus->chip = bus_pub->devid;
 	bus->chiprev = bus_pub->chiprev;
-- 
cgit v1.1


From 31fc436f184dc4219d837d4ffc97ad7c2ca0954d Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:38 +0100
Subject: brcmutil: use define for boardrev string function

Introducing a define that the caller of brcmu_boardrev_str() can
use to allocate enough room for buffer passed to the function.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmsmac/debug.c      | 2 +-
 drivers/net/wireless/brcm80211/brcmutil/utils.c      | 5 +++--
 drivers/net/wireless/brcm80211/include/brcmu_utils.h | 2 ++
 3 files changed, 6 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmsmac/debug.c b/drivers/net/wireless/brcm80211/brcmsmac/debug.c
index c9a8b93..7a1fbb2 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/debug.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/debug.c
@@ -78,7 +78,7 @@ int brcms_debugfs_hardware_read(struct seq_file *s, void *data)
 	struct brcms_hardware *hw = drvr->wlc->hw;
 	struct bcma_device *core = hw->d11core;
 	struct bcma_bus *bus = core->bus;
-	char boardrev[10];
+	char boardrev[BRCMU_BOARDREV_LEN];
 
 	seq_printf(s, "chipnum 0x%x\n"
 		   "chiprev 0x%x\n"
diff --git a/drivers/net/wireless/brcm80211/brcmutil/utils.c b/drivers/net/wireless/brcm80211/brcmutil/utils.c
index 906e89d..34937d8 100644
--- a/drivers/net/wireless/brcm80211/brcmutil/utils.c
+++ b/drivers/net/wireless/brcm80211/brcmutil/utils.c
@@ -267,10 +267,11 @@ char *brcmu_boardrev_str(u32 brev, char *buf)
 	char c;
 
 	if (brev < 0x100) {
-		snprintf(buf, 8, "%d.%d", (brev & 0xf0) >> 4, brev & 0xf);
+		snprintf(buf, BRCMU_BOARDREV_LEN, "%d.%d",
+			 (brev & 0xf0) >> 4, brev & 0xf);
 	} else {
 		c = (brev & 0xf000) == 0x1000 ? 'P' : 'A';
-		snprintf(buf, 8, "%c%03x", c, brev & 0xfff);
+		snprintf(buf, BRCMU_BOARDREV_LEN, "%c%03x", c, brev & 0xfff);
 	}
 	return buf;
 }
diff --git a/drivers/net/wireless/brcm80211/include/brcmu_utils.h b/drivers/net/wireless/brcm80211/include/brcmu_utils.h
index a043e29..197317b 100644
--- a/drivers/net/wireless/brcm80211/include/brcmu_utils.h
+++ b/drivers/net/wireless/brcm80211/include/brcmu_utils.h
@@ -218,6 +218,8 @@ void brcmu_dbg_hex_dump(const void *data, size_t size, const char *fmt, ...)
 }
 #endif
 
+#define BRCMU_BOARDREV_LEN	8
+
 char *brcmu_boardrev_str(u32 brev, char *buf);
 
 #endif				/* _BRCMU_UTILS_H_ */
-- 
cgit v1.1


From 9b1933a3bd7c4568edc4d906bf1cc0e901ce1ec4 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:39 +0100
Subject: brcmfmac: determine chip info when not provided by bus layer

In some scenarios the chip number and revision may not be provided
by the bus layer. If the chip number is not filled, the common
layer will ask the firmware for this information.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/core.c     | 15 ++++++++
 drivers/net/wireless/brcm80211/brcmfmac/fwil.h     |  1 +
 .../net/wireless/brcm80211/brcmfmac/fwil_types.h   | 41 ++++++++++++++++++++++
 3 files changed, 57 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/core.c b/drivers/net/wireless/brcm80211/brcmfmac/core.c
index b8520c3..5f16a7e 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
@@ -948,6 +948,7 @@ int brcmf_bus_start(struct device *dev)
 	struct brcmf_pub *drvr = bus_if->drvr;
 	struct brcmf_if *ifp;
 	struct brcmf_if *p2p_ifp;
+	struct brcmf_rev_info_le revinfo;
 
 	brcmf_dbg(TRACE, "\n");
 
@@ -971,6 +972,20 @@ int brcmf_bus_start(struct device *dev)
 	if (ret < 0)
 		goto fail;
 
+	/* assure we have chipid before feature attach */
+	if (!bus_if->chip) {
+		ret = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_REVINFO, &revinfo,
+					     sizeof(revinfo));
+		if (ret < 0) {
+			brcmf_err("no chipid determined - device may malfunction\n");
+		} else {
+			bus_if->chip = le32_to_cpu(revinfo.chipnum);
+			bus_if->chiprev = le32_to_cpu(revinfo.chiprev);
+			brcmf_dbg(INFO, "firmware revinfo: chip %x (%d) rev %d\n",
+				  bus_if->chip, bus_if->chip,
+				  bus_if->chiprev);
+		}
+	}
 	brcmf_feat_attach(drvr);
 
 	ret = brcmf_fws_init(drvr);
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h
index 37345e7..5434dcf 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwil.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil.h
@@ -59,6 +59,7 @@
 #define BRCMF_C_SET_COUNTRY			84
 #define BRCMF_C_GET_PM				85
 #define BRCMF_C_SET_PM				86
+#define BRCMF_C_GET_REVINFO			98
 #define BRCMF_C_GET_CURR_RATESET		114
 #define BRCMF_C_GET_AP				117
 #define BRCMF_C_SET_AP				118
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
index 619669b..3749209 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h
@@ -539,4 +539,45 @@ struct brcmf_fil_country_le {
 	char ccode[BRCMF_COUNTRY_BUF_SZ];
 };
 
+/**
+ * struct brcmf_rev_info_le - device revision info.
+ *
+ * @vendorid: PCI vendor id.
+ * @deviceid: device id of chip.
+ * @radiorev: radio revision.
+ * @chiprev: chip revision.
+ * @corerev: core revision.
+ * @boardid: board identifier (usu. PCI sub-device id).
+ * @boardvendor: board vendor (usu. PCI sub-vendor id).
+ * @boardrev: board revision.
+ * @driverrev: driver version.
+ * @ucoderev: microcode version.
+ * @bus: bus type.
+ * @chipnum: chip number.
+ * @phytype: phy type.
+ * @phyrev: phy revision.
+ * @anarev: anacore rev.
+ * @chippkg: chip package info.
+ * @nvramrev: nvram revision number.
+ */
+struct brcmf_rev_info_le {
+	__le32 vendorid;
+	__le32 deviceid;
+	__le32 radiorev;
+	__le32 chiprev;
+	__le32 corerev;
+	__le32 boardid;
+	__le32 boardvendor;
+	__le32 boardrev;
+	__le32 driverrev;
+	__le32 ucoderev;
+	__le32 bus;
+	__le32 chipnum;
+	__le32 phytype;
+	__le32 phyrev;
+	__le32 anarev;
+	__le32 chippkg;
+	__le32 nvramrev;
+};
+
 #endif /* FWIL_TYPES_H_ */
-- 
cgit v1.1


From 4862290319ade31237ea9e5d61fae5d01b76c28f Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:40 +0100
Subject: brcmfmac: always obtain device revision info upon intialization

Obtain device revision information and store it.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/common.c | 30 ++++++++++++++++++++++--
 drivers/net/wireless/brcm80211/brcmfmac/core.c   | 16 ++++---------
 drivers/net/wireless/brcm80211/brcmfmac/core.h   | 22 +++++++++++++++++
 3 files changed, 54 insertions(+), 14 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/common.c b/drivers/net/wireless/brcm80211/brcmfmac/common.c
index ddf05af..91213a6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/common.c
@@ -41,6 +41,8 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 	s8 eventmask[BRCMF_EVENTING_MASK_LEN];
 	u8 buf[BRCMF_DCMD_SMLEN];
 	struct brcmf_join_pref_params join_pref_params[2];
+	struct brcmf_rev_info_le revinfo;
+	struct brcmf_rev_info *ri;
 	char *ptr;
 	s32 err;
 
@@ -48,12 +50,36 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 	err = brcmf_fil_iovar_data_get(ifp, "cur_etheraddr", ifp->mac_addr,
 				       sizeof(ifp->mac_addr));
 	if (err < 0) {
-		brcmf_err("Retreiving cur_etheraddr failed, %d\n",
-			  err);
+		brcmf_err("Retreiving cur_etheraddr failed, %d\n", err);
 		goto done;
 	}
 	memcpy(ifp->drvr->mac, ifp->mac_addr, sizeof(ifp->drvr->mac));
 
+	err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_REVINFO,
+				     &revinfo, sizeof(revinfo));
+	if (err < 0) {
+		brcmf_err("retrieving revision info failed, %d\n", err);
+	} else {
+		ri = &ifp->drvr->revinfo;
+		ri->vendorid = le32_to_cpu(revinfo.vendorid);
+		ri->deviceid = le32_to_cpu(revinfo.deviceid);
+		ri->radiorev = le32_to_cpu(revinfo.radiorev);
+		ri->chiprev = le32_to_cpu(revinfo.chiprev);
+		ri->corerev = le32_to_cpu(revinfo.corerev);
+		ri->boardid = le32_to_cpu(revinfo.boardid);
+		ri->boardvendor = le32_to_cpu(revinfo.boardvendor);
+		ri->boardrev = le32_to_cpu(revinfo.boardrev);
+		ri->driverrev = le32_to_cpu(revinfo.driverrev);
+		ri->ucoderev = le32_to_cpu(revinfo.ucoderev);
+		ri->bus = le32_to_cpu(revinfo.bus);
+		ri->chipnum = le32_to_cpu(revinfo.chipnum);
+		ri->phytype = le32_to_cpu(revinfo.phytype);
+		ri->phyrev = le32_to_cpu(revinfo.phyrev);
+		ri->anarev = le32_to_cpu(revinfo.anarev);
+		ri->chippkg = le32_to_cpu(revinfo.chippkg);
+		ri->nvramrev = le32_to_cpu(revinfo.nvramrev);
+	}
+
 	/* query for 'ver' to get version info from firmware */
 	memset(buf, 0, sizeof(buf));
 	strcpy(buf, "ver");
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/core.c b/drivers/net/wireless/brcm80211/brcmfmac/core.c
index 5f16a7e..6406f95 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
@@ -948,7 +948,6 @@ int brcmf_bus_start(struct device *dev)
 	struct brcmf_pub *drvr = bus_if->drvr;
 	struct brcmf_if *ifp;
 	struct brcmf_if *p2p_ifp;
-	struct brcmf_rev_info_le revinfo;
 
 	brcmf_dbg(TRACE, "\n");
 
@@ -974,17 +973,10 @@ int brcmf_bus_start(struct device *dev)
 
 	/* assure we have chipid before feature attach */
 	if (!bus_if->chip) {
-		ret = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_REVINFO, &revinfo,
-					     sizeof(revinfo));
-		if (ret < 0) {
-			brcmf_err("no chipid determined - device may malfunction\n");
-		} else {
-			bus_if->chip = le32_to_cpu(revinfo.chipnum);
-			bus_if->chiprev = le32_to_cpu(revinfo.chiprev);
-			brcmf_dbg(INFO, "firmware revinfo: chip %x (%d) rev %d\n",
-				  bus_if->chip, bus_if->chip,
-				  bus_if->chiprev);
-		}
+		bus_if->chip = drvr->revinfo.chipnum;
+		bus_if->chiprev = drvr->revinfo.chiprev;
+		brcmf_dbg(INFO, "firmware revinfo: chip %x (%d) rev %d\n",
+			  bus_if->chip, bus_if->chip, bus_if->chiprev);
 	}
 	brcmf_feat_attach(drvr);
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/core.h b/drivers/net/wireless/brcm80211/brcmfmac/core.h
index f2f7d3d..db7f35f 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
@@ -71,6 +71,27 @@ struct brcmf_proto;	/* device communication protocol info */
 struct brcmf_cfg80211_dev; /* cfg80211 device info */
 struct brcmf_fws_info; /* firmware signalling info */
 
+/* see struct brcmf_rev_info_le in fwil_types.h */
+struct brcmf_rev_info {
+	u32 vendorid;
+	u32 deviceid;
+	u32 radiorev;
+	u32 chiprev;
+	u32 corerev;
+	u32 boardid;
+	u32 boardvendor;
+	u32 boardrev;
+	u32 driverrev;
+	u32 ucoderev;
+	u32 bus;
+	u32 chipnum;
+	u32 phytype;
+	u32 phyrev;
+	u32 anarev;
+	u32 chippkg;
+	u32 nvramrev;
+};
+
 /* Common structure for module and instance linkage */
 struct brcmf_pub {
 	/* Linkage ponters */
@@ -104,6 +125,7 @@ struct brcmf_pub {
 	u32 feat_flags;
 	u32 chip_quirks;
 
+	struct brcmf_rev_info revinfo;
 #ifdef DEBUG
 	struct dentry *dbgfs_dir;
 #endif
-- 
cgit v1.1


From e749c7d49c2093d05d6f546f1a1a228cf3088e54 Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:41 +0100
Subject: brcmfmac: show firmware release info in ethtool driver info

The ethtool driver info already contained the unique firmware
identifier. This patch adds the firmware release version.

   $ ethtool -i wlan4
   driver: brcmfmac
   version: 6.10.224.22
   firmware-version: 01-32bd010f

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/core.c     |  4 +++-
 drivers/net/wireless/brcm80211/brcmutil/utils.c    | 27 ++++++++++++++++++++++
 .../net/wireless/brcm80211/include/brcmu_utils.h   |  2 ++
 3 files changed, 32 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/core.c b/drivers/net/wireless/brcm80211/brcmfmac/core.c
index 6406f95..8d03588 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
@@ -601,9 +601,11 @@ static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
 {
 	struct brcmf_if *ifp = netdev_priv(ndev);
 	struct brcmf_pub *drvr = ifp->drvr;
+	char drev[BRCMU_DOTREV_LEN];
 
 	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
-	snprintf(info->version, sizeof(info->version), "n/a");
+	strlcpy(info->version, brcmu_dotrev_str(drvr->revinfo.driverrev, drev),
+		sizeof(info->version));
 	strlcpy(info->fw_version, drvr->fwver, sizeof(info->fw_version));
 	strlcpy(info->bus_info, dev_name(drvr->bus_if->dev),
 		sizeof(info->bus_info));
diff --git a/drivers/net/wireless/brcm80211/brcmutil/utils.c b/drivers/net/wireless/brcm80211/brcmutil/utils.c
index 34937d8..0543607 100644
--- a/drivers/net/wireless/brcm80211/brcmutil/utils.c
+++ b/drivers/net/wireless/brcm80211/brcmutil/utils.c
@@ -277,6 +277,33 @@ char *brcmu_boardrev_str(u32 brev, char *buf)
 }
 EXPORT_SYMBOL(brcmu_boardrev_str);
 
+char *brcmu_dotrev_str(u32 dotrev, char *buf)
+{
+	u8 dotval[4];
+
+	if (!dotrev) {
+		snprintf(buf, BRCMU_DOTREV_LEN, "unknown");
+		return buf;
+	}
+	dotval[0] = (dotrev >> 24) & 0xFF;
+	dotval[1] = (dotrev >> 16) & 0xFF;
+	dotval[2] = (dotrev >> 8) & 0xFF;
+	dotval[3] = dotrev & 0xFF;
+
+	if (dotval[3])
+		snprintf(buf, BRCMU_DOTREV_LEN, "%d.%d.%d.%d", dotval[0],
+			dotval[1], dotval[2], dotval[3]);
+	else if (dotval[2])
+		snprintf(buf, BRCMU_DOTREV_LEN, "%d.%d.%d", dotval[0],
+			dotval[1], dotval[2]);
+	else
+		snprintf(buf, BRCMU_DOTREV_LEN, "%d.%d", dotval[0],
+			dotval[1]);
+
+	return buf;
+}
+EXPORT_SYMBOL(brcmu_dotrev_str);
+
 #if defined(DEBUG)
 /* pretty hex print a pkt buffer chain */
 void brcmu_prpkt(const char *msg, struct sk_buff *p0)
diff --git a/drivers/net/wireless/brcm80211/include/brcmu_utils.h b/drivers/net/wireless/brcm80211/include/brcmu_utils.h
index 197317b..4196952 100644
--- a/drivers/net/wireless/brcm80211/include/brcmu_utils.h
+++ b/drivers/net/wireless/brcm80211/include/brcmu_utils.h
@@ -219,7 +219,9 @@ void brcmu_dbg_hex_dump(const void *data, size_t size, const char *fmt, ...)
 #endif
 
 #define BRCMU_BOARDREV_LEN	8
+#define BRCMU_DOTREV_LEN	16
 
 char *brcmu_boardrev_str(u32 brev, char *buf);
+char *brcmu_dotrev_str(u32 dotrev, char *buf);
 
 #endif				/* _BRCMU_UTILS_H_ */
-- 
cgit v1.1


From 7f52c81d02a27943e0c45103d7d10f629b0b58ae Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:42 +0100
Subject: brcmfmac: store revinfo retrieval result

When revinfo retrieval fails we can not show the firmware version
in ethtool driver info. Store the result to be used when handling
ethtool driver info callback.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/common.c |  3 ++-
 drivers/net/wireless/brcm80211/brcmfmac/core.c   |  7 ++++---
 drivers/net/wireless/brcm80211/brcmfmac/core.h   | 10 +++++++++-
 3 files changed, 15 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/common.c b/drivers/net/wireless/brcm80211/brcmfmac/common.c
index 91213a6..fe54844 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/common.c
@@ -57,10 +57,10 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 
 	err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_REVINFO,
 				     &revinfo, sizeof(revinfo));
+	ri = &ifp->drvr->revinfo;
 	if (err < 0) {
 		brcmf_err("retrieving revision info failed, %d\n", err);
 	} else {
-		ri = &ifp->drvr->revinfo;
 		ri->vendorid = le32_to_cpu(revinfo.vendorid);
 		ri->deviceid = le32_to_cpu(revinfo.deviceid);
 		ri->radiorev = le32_to_cpu(revinfo.radiorev);
@@ -79,6 +79,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 		ri->chippkg = le32_to_cpu(revinfo.chippkg);
 		ri->nvramrev = le32_to_cpu(revinfo.nvramrev);
 	}
+	ri->result = err;
 
 	/* query for 'ver' to get version info from firmware */
 	memset(buf, 0, sizeof(buf));
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/core.c b/drivers/net/wireless/brcm80211/brcmfmac/core.c
index 8d03588..2d6e2cc 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.c
@@ -601,11 +601,12 @@ static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
 {
 	struct brcmf_if *ifp = netdev_priv(ndev);
 	struct brcmf_pub *drvr = ifp->drvr;
-	char drev[BRCMU_DOTREV_LEN];
+	char drev[BRCMU_DOTREV_LEN] = "n/a";
 
+	if (drvr->revinfo.result == 0)
+		brcmu_dotrev_str(drvr->revinfo.driverrev, drev);
 	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
-	strlcpy(info->version, brcmu_dotrev_str(drvr->revinfo.driverrev, drev),
-		sizeof(info->version));
+	strlcpy(info->version, drev, sizeof(info->version));
 	strlcpy(info->fw_version, drvr->fwver, sizeof(info->fw_version));
 	strlcpy(info->bus_info, dev_name(drvr->bus_if->dev),
 		sizeof(info->bus_info));
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/core.h b/drivers/net/wireless/brcm80211/brcmfmac/core.h
index db7f35f..fd74a9c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/core.h
@@ -71,8 +71,16 @@ struct brcmf_proto;	/* device communication protocol info */
 struct brcmf_cfg80211_dev; /* cfg80211 device info */
 struct brcmf_fws_info; /* firmware signalling info */
 
-/* see struct brcmf_rev_info_le in fwil_types.h */
+/*
+ * struct brcmf_rev_info
+ *
+ * The result field stores the error code of the
+ * revision info request from firmware. For the
+ * other fields see struct brcmf_rev_info_le in
+ * fwil_types.h
+ */
 struct brcmf_rev_info {
+	int result;
 	u32 vendorid;
 	u32 deviceid;
 	u32 radiorev;
-- 
cgit v1.1


From 4165fe9a9287aa9c8e7e4152c21ee179d49d129e Mon Sep 17 00:00:00 2001
From: Arend van Spriel <arend@broadcom.com>
Date: Sun, 25 Jan 2015 20:31:43 +0100
Subject: brcmfmac: fix nvram processing

The nvram file can hold a key=value combination in which the value
may have spaces, ie. 'RAW1=80 02 fe ff'. The parsing functionality
did not deal with this so it gives an error message:

[621746.311635] brcmfmac: brcmf_nvram_handle_key
	warning: ln=90:col=11: '=' expected, skip invalid key entry

because RAW1=80 is being considerd as key=value pair and it expects
'=' sign after '02' for next key=value pair. This entry can be
completely ignored as firmware does not need it.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/firmware.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
index 1ff787d..9cb9915 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/firmware.c
@@ -103,7 +103,11 @@ static enum nvram_parser_state brcmf_nvram_handle_key(struct nvram_parser *nvp)
 
 	c = nvp->fwnv->data[nvp->pos];
 	if (c == '=') {
-		st = VALUE;
+		/* ignore RAW1 by treating as comment */
+		if (strncmp(&nvp->fwnv->data[nvp->entry], "RAW1", 4) == 0)
+			st = COMMENT;
+		else
+			st = VALUE;
 	} else if (!is_nvram_char(c)) {
 		brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
 			  nvp->line, nvp->column);
-- 
cgit v1.1


From e52a85d383d505ee7654ba993a6a31eeee79f232 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:41:58 +0530
Subject: mwifiex: remove redundant nick_name variable

This is not used anywhere execpt initialization.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/main.c | 1 -
 drivers/net/wireless/mwifiex/main.h | 1 -
 2 files changed, 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 9836df0..99cd360 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -968,7 +968,6 @@ void mwifiex_init_priv_params(struct mwifiex_private *priv,
 	/* Initialize private structure */
 	priv->current_key_index = 0;
 	priv->media_connected = false;
-	memset(&priv->nick_name, 0, sizeof(priv->nick_name));
 	memset(priv->mgmt_ie, 0,
 	       sizeof(struct mwifiex_ie) * MAX_MGMT_IE_INDEX);
 	priv->beacon_idx = MWIFIEX_AUTO_IDX_MASK;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 55273ee..99792b8 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -553,7 +553,6 @@ struct mwifiex_private {
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dfs_dev_dir;
 #endif
-	u8 nick_name[16];
 	u16 current_key_index;
 	struct semaphore async_sem;
 	struct cfg80211_scan_request *scan_request;
-- 
cgit v1.1


From 09f63ae65f907a7fadf7fcf408f80909cbf2af4b Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:41:59 +0530
Subject: mwifiex: set wiphy params only once

RTS threshold, fragmentation threshold are per device properties.
Setting them on any interface would be reflected for all other
interfaces as well. This patch removes unnesessary command download
per interface.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 111 ++++++++++++++------------------
 1 file changed, 48 insertions(+), 63 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 7be1e9b..dd0e410 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -590,77 +590,62 @@ mwifiex_cfg80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
 	struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy);
 	struct mwifiex_private *priv;
 	struct mwifiex_uap_bss_param *bss_cfg;
-	int ret, bss_started, i;
-
-	for (i = 0; i < adapter->priv_num; i++) {
-		priv = adapter->priv[i];
-
-		switch (priv->bss_role) {
-		case MWIFIEX_BSS_ROLE_UAP:
-			bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param),
-					  GFP_KERNEL);
-			if (!bss_cfg)
-				return -ENOMEM;
-
-			mwifiex_set_sys_config_invalid_data(bss_cfg);
-
-			if (changed & WIPHY_PARAM_RTS_THRESHOLD)
-				bss_cfg->rts_threshold = wiphy->rts_threshold;
-			if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
-				bss_cfg->frag_threshold = wiphy->frag_threshold;
-			if (changed & WIPHY_PARAM_RETRY_LONG)
-				bss_cfg->retry_limit = wiphy->retry_long;
-
-			bss_started = priv->bss_started;
-
-			ret = mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP,
-					       HostCmd_ACT_GEN_SET, 0,
-					       NULL, true);
-			if (ret) {
-				wiphy_err(wiphy, "Failed to stop the BSS\n");
-				kfree(bss_cfg);
-				return ret;
-			}
+	int ret;
 
-			ret = mwifiex_send_cmd(priv, HostCmd_CMD_UAP_SYS_CONFIG,
-					       HostCmd_ACT_GEN_SET,
-					       UAP_BSS_PARAMS_I, bss_cfg,
-					       false);
+	priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
 
-			kfree(bss_cfg);
+	switch (priv->bss_role) {
+	case MWIFIEX_BSS_ROLE_UAP:
+		if (priv->bss_started) {
+			dev_err(adapter->dev,
+				"cannot change wiphy params when bss started");
+			return -EINVAL;
+		}
 
-			if (ret) {
-				wiphy_err(wiphy, "Failed to set bss config\n");
-				return ret;
-			}
+		bss_cfg = kzalloc(sizeof(*bss_cfg), GFP_KERNEL);
+		if (!bss_cfg)
+			return -ENOMEM;
 
-			if (!bss_started)
-				break;
+		mwifiex_set_sys_config_invalid_data(bss_cfg);
 
-			ret = mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_START,
-					       HostCmd_ACT_GEN_SET, 0,
-					       NULL, false);
-			if (ret) {
-				wiphy_err(wiphy, "Failed to start BSS\n");
-				return ret;
-			}
+		if (changed & WIPHY_PARAM_RTS_THRESHOLD)
+			bss_cfg->rts_threshold = wiphy->rts_threshold;
+		if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
+			bss_cfg->frag_threshold = wiphy->frag_threshold;
+		if (changed & WIPHY_PARAM_RETRY_LONG)
+			bss_cfg->retry_limit = wiphy->retry_long;
+
+		ret = mwifiex_send_cmd(priv, HostCmd_CMD_UAP_SYS_CONFIG,
+				       HostCmd_ACT_GEN_SET,
+				       UAP_BSS_PARAMS_I, bss_cfg,
+				       false);
+
+		kfree(bss_cfg);
+		if (ret) {
+			wiphy_err(wiphy, "Failed to set wiphy phy params\n");
+			return ret;
+		}
+		break;
 
-			break;
 		case MWIFIEX_BSS_ROLE_STA:
-			if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
-				ret = mwifiex_set_rts(priv,
-						      wiphy->rts_threshold);
-				if (ret)
-					return ret;
-			}
-			if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
-				ret = mwifiex_set_frag(priv,
-						       wiphy->frag_threshold);
-				if (ret)
-					return ret;
-			}
-			break;
+		if (priv->media_connected) {
+			dev_err(adapter->dev,
+				"cannot change wiphy params when connected");
+			return -EINVAL;
+		}
+		if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
+			ret = mwifiex_set_rts(priv,
+					      wiphy->rts_threshold);
+			if (ret)
+				return ret;
 		}
+		if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
+			ret = mwifiex_set_frag(priv,
+					       wiphy->frag_threshold);
+			if (ret)
+				return ret;
+		}
+		break;
 	}
 
 	return 0;
-- 
cgit v1.1


From 4facc34a1f1d6ba8fafc9afdb84f9c6ed4334c4c Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:42:00 +0530
Subject: mwifiex: do not declare wdev as pointer

wdev is used even after del_virtual_interface handler in cfg80211
in nl80211_post_doit. Since we have freed wdev in handling of
del_virtual_intf, this can result into crash while deleting
interface.
Avoid this be not declaring wdev which part of
mwifiex_private structure but struct wireless_dev type.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/11h.c           |  2 +-
 drivers/net/wireless/mwifiex/11n.c           |  4 +-
 drivers/net/wireless/mwifiex/11n_rxreorder.c |  2 +-
 drivers/net/wireless/mwifiex/cfg80211.c      | 70 ++++++++++------------------
 drivers/net/wireless/mwifiex/cfp.c           |  4 +-
 drivers/net/wireless/mwifiex/main.c          |  5 +-
 drivers/net/wireless/mwifiex/main.h          |  2 +-
 drivers/net/wireless/mwifiex/scan.c          | 10 ++--
 drivers/net/wireless/mwifiex/sta_event.c     |  2 +-
 drivers/net/wireless/mwifiex/sta_ioctl.c     |  2 +-
 drivers/net/wireless/mwifiex/txrx.c          |  2 +-
 drivers/net/wireless/mwifiex/util.c          |  2 +-
 12 files changed, 44 insertions(+), 63 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/11h.c b/drivers/net/wireless/mwifiex/11h.c
index 2668e83..f23b647a 100644
--- a/drivers/net/wireless/mwifiex/11h.c
+++ b/drivers/net/wireless/mwifiex/11h.c
@@ -39,7 +39,7 @@ mwifiex_11h_process_infra_join(struct mwifiex_private *priv, u8 **buffer,
 		return;
 
 	radio_type = mwifiex_band_to_radio_type((u8) bss_desc->bss_band);
-	sband = priv->wdev->wiphy->bands[radio_type];
+	sband = priv->wdev.wiphy->bands[radio_type];
 
 	cap = (struct mwifiex_ie_types_pwr_capability *)*buffer;
 	cap->header.type = cpu_to_le16(WLAN_EID_PWR_CAPABILITY);
diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c
index c5c83cf..543148d 100644
--- a/drivers/net/wireless/mwifiex/11n.c
+++ b/drivers/net/wireless/mwifiex/11n.c
@@ -39,7 +39,7 @@ int mwifiex_fill_cap_info(struct mwifiex_private *priv, u8 radio_type,
 {
 	uint16_t ht_ext_cap = le16_to_cpu(ht_cap->extended_ht_cap_info);
 	struct ieee80211_supported_band *sband =
-					priv->wdev->wiphy->bands[radio_type];
+					priv->wdev.wiphy->bands[radio_type];
 
 	if (WARN_ON_ONCE(!sband)) {
 		dev_err(priv->adapter->dev, "Invalid radio type!\n");
@@ -314,7 +314,7 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,
 		return ret_len;
 
 	radio_type = mwifiex_band_to_radio_type((u8) bss_desc->bss_band);
-	sband = priv->wdev->wiphy->bands[radio_type];
+	sband = priv->wdev.wiphy->bands[radio_type];
 
 	if (bss_desc->bcn_ht_cap) {
 		ht_cap = (struct mwifiex_ie_types_htcap *) *buffer;
diff --git a/drivers/net/wireless/mwifiex/11n_rxreorder.c b/drivers/net/wireless/mwifiex/11n_rxreorder.c
index c7ca5b7..a2e8817 100644
--- a/drivers/net/wireless/mwifiex/11n_rxreorder.c
+++ b/drivers/net/wireless/mwifiex/11n_rxreorder.c
@@ -45,7 +45,7 @@ static int mwifiex_11n_dispatch_amsdu_pkt(struct mwifiex_private *priv,
 		skb_trim(skb, le16_to_cpu(local_rx_pd->rx_pkt_length));
 
 		ieee80211_amsdu_to_8023s(skb, &list, priv->curr_addr,
-					 priv->wdev->iftype, 0, false);
+					 priv->wdev.iftype, 0, false);
 
 		while (!skb_queue_empty(&list)) {
 			rx_skb = __skb_dequeue(&list);
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index dd0e410..9710b23 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1590,15 +1590,15 @@ static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv)
 	ie_len = ie_buf[1] + sizeof(struct ieee_types_header);
 
 	band = mwifiex_band_to_radio_type(priv->curr_bss_params.band);
-	chan = __ieee80211_get_channel(priv->wdev->wiphy,
+	chan = __ieee80211_get_channel(priv->wdev.wiphy,
 			ieee80211_channel_to_frequency(bss_info.bss_chan,
 						       band));
 
-	bss = cfg80211_inform_bss(priv->wdev->wiphy, chan,
+	bss = cfg80211_inform_bss(priv->wdev.wiphy, chan,
 				  CFG80211_BSS_FTYPE_UNKNOWN,
 				  bss_info.bssid, 0, WLAN_CAPABILITY_IBSS,
 				  0, ie_buf, ie_len, 0, GFP_KERNEL);
-	cfg80211_put_bss(priv->wdev->wiphy, bss);
+	cfg80211_put_bss(priv->wdev.wiphy, bss);
 	memcpy(priv->cfg_bssid, bss_info.bssid, ETH_ALEN);
 
 	return 0;
@@ -1719,12 +1719,12 @@ done:
 
 		/* Find the BSS we want using available scan results */
 		if (mode == NL80211_IFTYPE_ADHOC)
-			bss = cfg80211_get_bss(priv->wdev->wiphy, channel,
+			bss = cfg80211_get_bss(priv->wdev.wiphy, channel,
 					       bssid, ssid, ssid_len,
 					       WLAN_CAPABILITY_IBSS,
 					       WLAN_CAPABILITY_IBSS);
 		else
-			bss = cfg80211_get_bss(priv->wdev->wiphy, channel,
+			bss = cfg80211_get_bss(priv->wdev.wiphy, channel,
 					       bssid, ssid, ssid_len,
 					       WLAN_CAPABILITY_ESS,
 					       WLAN_CAPABILITY_ESS);
@@ -1781,7 +1781,7 @@ mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 		return -EINVAL;
 	}
 
-	if (priv->wdev && priv->wdev->current_bss) {
+	if (priv->wdev.current_bss) {
 		wiphy_warn(wiphy, "%s: already connected\n", dev->name);
 		return -EALREADY;
 	}
@@ -1839,7 +1839,7 @@ mwifiex_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 static int mwifiex_set_ibss_params(struct mwifiex_private *priv,
 				   struct cfg80211_ibss_params *params)
 {
-	struct wiphy *wiphy = priv->wdev->wiphy;
+	struct wiphy *wiphy = priv->wdev.wiphy;
 	struct mwifiex_adapter *adapter = priv->adapter;
 	int index = 0, i;
 	u8 config_bands = 0;
@@ -2177,7 +2177,6 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 	struct mwifiex_private *priv;
 	struct net_device *dev;
 	void *mdev_priv;
-	struct wireless_dev *wdev;
 
 	if (!adapter)
 		return ERR_PTR(-EFAULT);
@@ -2193,13 +2192,8 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 			return ERR_PTR(-EINVAL);
 		}
 
-		wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
-		if (!wdev)
-			return ERR_PTR(-ENOMEM);
-
-		wdev->wiphy = wiphy;
-		priv->wdev = wdev;
-		wdev->iftype = NL80211_IFTYPE_STATION;
+		priv->wdev.wiphy = wiphy;
+		priv->wdev.iftype = NL80211_IFTYPE_STATION;
 
 		if (type == NL80211_IFTYPE_UNSPECIFIED)
 			priv->bss_mode = NL80211_IFTYPE_STATION;
@@ -2221,13 +2215,8 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 			return ERR_PTR(-EINVAL);
 		}
 
-		wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
-		if (!wdev)
-			return ERR_PTR(-ENOMEM);
-
-		priv->wdev = wdev;
-		wdev->wiphy = wiphy;
-		wdev->iftype = NL80211_IFTYPE_AP;
+		priv->wdev.wiphy = wiphy;
+		priv->wdev.iftype = NL80211_IFTYPE_AP;
 
 		priv->bss_type = MWIFIEX_BSS_TYPE_UAP;
 		priv->frame_type = MWIFIEX_DATA_FRAME_TYPE_ETH_II;
@@ -2246,17 +2235,12 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 			return ERR_PTR(-EINVAL);
 		}
 
-		wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
-		if (!wdev)
-			return ERR_PTR(-ENOMEM);
-
-		priv->wdev = wdev;
-		wdev->wiphy = wiphy;
+		priv->wdev.wiphy = wiphy;
 
 		/* At start-up, wpa_supplicant tries to change the interface
 		 * to NL80211_IFTYPE_STATION if it is not managed mode.
 		 */
-		wdev->iftype = NL80211_IFTYPE_P2P_CLIENT;
+		priv->wdev.iftype = NL80211_IFTYPE_P2P_CLIENT;
 		priv->bss_mode = NL80211_IFTYPE_P2P_CLIENT;
 
 		/* Setting bss_type to P2P tells firmware that this interface
@@ -2272,8 +2256,9 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 		priv->bss_num = 0;
 
 		if (mwifiex_cfg80211_init_p2p_client(priv)) {
-			wdev = ERR_PTR(-EFAULT);
-			goto done;
+			memset(&priv->wdev, 0, sizeof(priv->wdev));
+			priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED;
+			return ERR_PTR(-EFAULT);
 		}
 
 		break;
@@ -2287,9 +2272,10 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 			       IEEE80211_NUM_ACS, 1);
 	if (!dev) {
 		wiphy_err(wiphy, "no memory available for netdevice\n");
+		memset(&priv->wdev, 0, sizeof(priv->wdev));
+		priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED;
 		priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
-		wdev = ERR_PTR(-ENOMEM);
-		goto done;
+		return ERR_PTR(-ENOMEM);
 	}
 
 	mwifiex_init_priv_params(priv, dev);
@@ -2309,7 +2295,7 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 			&wiphy->bands[IEEE80211_BAND_5GHZ]->vht_cap, priv);
 
 	dev_net_set(dev, wiphy_net(wiphy));
-	dev->ieee80211_ptr = priv->wdev;
+	dev->ieee80211_ptr = &priv->wdev;
 	dev->ieee80211_ptr->iftype = priv->bss_mode;
 	memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN);
 	SET_NETDEV_DEV(dev, wiphy_dev(wiphy));
@@ -2330,8 +2316,9 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 		free_netdev(dev);
 		priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
 		priv->netdev = NULL;
-		wdev = ERR_PTR(-EFAULT);
-		goto done;
+		memset(&priv->wdev, 0, sizeof(priv->wdev));
+		priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED;
+		return ERR_PTR(-EFAULT);
 	}
 
 	sema_init(&priv->async_sem, 1);
@@ -2342,13 +2329,7 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 	mwifiex_dev_debugfs_init(priv);
 #endif
 
-done:
-	if (IS_ERR(wdev)) {
-		kfree(priv->wdev);
-		priv->wdev = NULL;
-	}
-
-	return wdev;
+	return &priv->wdev;
 }
 EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf);
 
@@ -2374,8 +2355,7 @@ int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 	/* Clear the priv in adapter */
 	priv->netdev->ieee80211_ptr = NULL;
 	priv->netdev = NULL;
-	kfree(wdev);
-	priv->wdev = NULL;
+	priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED;
 
 	priv->media_connected = false;
 
diff --git a/drivers/net/wireless/mwifiex/cfp.c b/drivers/net/wireless/mwifiex/cfp.c
index f494fc7..e9df882 100644
--- a/drivers/net/wireless/mwifiex/cfp.c
+++ b/drivers/net/wireless/mwifiex/cfp.c
@@ -322,9 +322,9 @@ mwifiex_get_cfp(struct mwifiex_private *priv, u8 band, u16 channel, u32 freq)
 		return cfp;
 
 	if (mwifiex_band_to_radio_type(band) == HostCmd_SCAN_RADIO_TYPE_BG)
-		sband = priv->wdev->wiphy->bands[IEEE80211_BAND_2GHZ];
+		sband = priv->wdev.wiphy->bands[IEEE80211_BAND_2GHZ];
 	else
-		sband = priv->wdev->wiphy->bands[IEEE80211_BAND_5GHZ];
+		sband = priv->wdev.wiphy->bands[IEEE80211_BAND_5GHZ];
 
 	if (!sband) {
 		dev_err(priv->adapter->dev, "%s: cannot find cfp by band %d\n",
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 99cd360..49dec6b 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -1203,8 +1203,9 @@ int mwifiex_remove_card(struct mwifiex_adapter *adapter, struct semaphore *sem)
 			continue;
 
 		rtnl_lock();
-		if (priv->wdev && priv->netdev)
-			mwifiex_del_virtual_intf(adapter->wiphy, priv->wdev);
+		if (priv->netdev &&
+		    priv->wdev.iftype != NL80211_IFTYPE_UNSPECIFIED)
+			mwifiex_del_virtual_intf(adapter->wiphy, &priv->wdev);
 		rtnl_unlock();
 	}
 
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 99792b8..a560179 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -547,7 +547,7 @@ struct mwifiex_private {
 	u32 curr_bcn_size;
 	/* spin lock for beacon buffer */
 	spinlock_t curr_bcn_buf_lock;
-	struct wireless_dev *wdev;
+	struct wireless_dev wdev;
 	struct mwifiex_chan_freq_power cfp;
 	char version_str[128];
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c
index e304f07..0ffdb7c 100644
--- a/drivers/net/wireless/mwifiex/scan.c
+++ b/drivers/net/wireless/mwifiex/scan.c
@@ -496,10 +496,10 @@ mwifiex_scan_create_channel_list(struct mwifiex_private *priv,
 
 	for (band = 0; (band < IEEE80211_NUM_BANDS) ; band++) {
 
-		if (!priv->wdev->wiphy->bands[band])
+		if (!priv->wdev.wiphy->bands[band])
 			continue;
 
-		sband = priv->wdev->wiphy->bands[band];
+		sband = priv->wdev.wiphy->bands[band];
 
 		for (i = 0; (i < sband->n_channels) ; i++) {
 			ch = &sband->channels[i];
@@ -1733,10 +1733,10 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 
 		freq = cfp ? cfp->freq : 0;
 
-		chan = ieee80211_get_channel(priv->wdev->wiphy, freq);
+		chan = ieee80211_get_channel(priv->wdev.wiphy, freq);
 
 		if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
-			bss = cfg80211_inform_bss(priv->wdev->wiphy,
+			bss = cfg80211_inform_bss(priv->wdev.wiphy,
 					    chan, CFG80211_BSS_FTYPE_UNKNOWN,
 					    bssid, timestamp,
 					    cap_info_bitmap, beacon_period,
@@ -1748,7 +1748,7 @@ mwifiex_parse_single_response_buf(struct mwifiex_private *priv, u8 **bss_info,
 			    !memcmp(bssid, priv->curr_bss_params.bss_descriptor
 				    .mac_address, ETH_ALEN))
 				mwifiex_update_curr_bss_params(priv, bss);
-			cfg80211_put_bss(priv->wdev->wiphy, bss);
+			cfg80211_put_bss(priv->wdev.wiphy, bss);
 		}
 	} else {
 		dev_dbg(adapter->dev, "missing BSS channel IE\n");
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index 419e35f..c37e8cb 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -487,7 +487,7 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 
 	case EVENT_REMAIN_ON_CHAN_EXPIRED:
 		dev_dbg(adapter->dev, "event: Remain on channel expired\n");
-		cfg80211_remain_on_channel_expired(priv->wdev,
+		cfg80211_remain_on_channel_expired(&priv->wdev,
 						   priv->roc_cfg.cookie,
 						   &priv->roc_cfg.chan,
 						   GFP_ATOMIC);
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index fb9c5fc..329cd51 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -219,7 +219,7 @@ static int mwifiex_process_country_ie(struct mwifiex_private *priv,
 
 	if (!strncmp(priv->adapter->country_code, &country_ie[2], 2)) {
 		rcu_read_unlock();
-		wiphy_dbg(priv->wdev->wiphy,
+		wiphy_dbg(priv->wdev.wiphy,
 			  "11D: skip setting domain info in FW\n");
 		return 0;
 	}
diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c
index 6ae1333..ac93557 100644
--- a/drivers/net/wireless/mwifiex/txrx.c
+++ b/drivers/net/wireless/mwifiex/txrx.c
@@ -227,7 +227,7 @@ void mwifiex_parse_tx_status_event(struct mwifiex_private *priv,
 			/* consumes ack_skb */
 			skb_complete_wifi_ack(ack_skb, !tx_status->status);
 		} else {
-			cfg80211_mgmt_tx_status(priv->wdev, tx_info->cookie,
+			cfg80211_mgmt_tx_status(&priv->wdev, tx_info->cookie,
 						ack_skb->data, ack_skb->len,
 						!tx_status->status, GFP_ATOMIC);
 			dev_kfree_skb_any(ack_skb);
diff --git a/drivers/net/wireless/mwifiex/util.c b/drivers/net/wireless/mwifiex/util.c
index 70731979..3085506 100644
--- a/drivers/net/wireless/mwifiex/util.c
+++ b/drivers/net/wireless/mwifiex/util.c
@@ -387,7 +387,7 @@ mwifiex_process_mgmt_packet(struct mwifiex_private *priv,
 	pkt_len -= ETH_ALEN + sizeof(pkt_len);
 	rx_pd->rx_pkt_length = cpu_to_le16(pkt_len);
 
-	cfg80211_rx_mgmt(priv->wdev, priv->roc_cfg.chan.center_freq,
+	cfg80211_rx_mgmt(&priv->wdev, priv->roc_cfg.chan.center_freq,
 			 CAL_RSSI(rx_pd->snr, rx_pd->nf), skb->data, pkt_len,
 			 0);
 
-- 
cgit v1.1


From 8d05eb222074169c22c9d2707f607cf762f8d027 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:42:01 +0530
Subject: mwifiex: store permanant mac address in adapter structure

This would be used to set mac address while changing virtual
interface to different types.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 2 +-
 drivers/net/wireless/mwifiex/cmdevt.c   | 4 +---
 drivers/net/wireless/mwifiex/init.c     | 1 +
 drivers/net/wireless/mwifiex/main.c     | 1 +
 drivers/net/wireless/mwifiex/main.h     | 1 +
 5 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 9710b23..85f5019 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2974,7 +2974,7 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 	wiphy->cipher_suites = mwifiex_cipher_suites;
 	wiphy->n_cipher_suites = ARRAY_SIZE(mwifiex_cipher_suites);
 
-	memcpy(wiphy->perm_addr, priv->curr_addr, ETH_ALEN);
+	ether_addr_copy(wiphy->perm_addr, adapter->perm_addr);
 	wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
 	wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
 			WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD |
diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 946a2f7..00586b2 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -1582,9 +1582,7 @@ int mwifiex_ret_get_hw_spec(struct mwifiex_private *priv,
 		le16_to_cpu(hw_spec->hw_if_version),
 		le16_to_cpu(hw_spec->version));
 
-	if (priv->curr_addr[0] == 0xff)
-		memmove(priv->curr_addr, hw_spec->permanent_addr, ETH_ALEN);
-
+	ether_addr_copy(priv->adapter->perm_addr, hw_spec->permanent_addr);
 	adapter->region_code = le16_to_cpu(hw_spec->region_code);
 
 	for (i = 0; i < MWIFIEX_MAX_REGION_CODE; i++)
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 8004d14..44babc3 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -297,6 +297,7 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
 	adapter->ext_scan = false;
 	adapter->key_api_major_ver = 0;
 	adapter->key_api_minor_ver = 0;
+	memset(adapter->perm_addr, 0xff, ETH_ALEN);
 
 	setup_timer(&adapter->wakeup_timer, wakeup_timer_fn,
 		    (unsigned long)adapter);
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 49dec6b..cb9cab2 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -975,6 +975,7 @@ void mwifiex_init_priv_params(struct mwifiex_private *priv,
 	priv->assocresp_idx = MWIFIEX_AUTO_IDX_MASK;
 	priv->rsn_idx = MWIFIEX_AUTO_IDX_MASK;
 	priv->num_tx_timeout = 0;
+	ether_addr_copy(priv->curr_addr, priv->adapter->perm_addr);
 	memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN);
 
 	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA ||
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index a560179..45b40af 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -737,6 +737,7 @@ struct mwifiex_adapter {
 	int winner;
 	struct device *dev;
 	struct wiphy *wiphy;
+	u8 perm_addr[ETH_ALEN];
 	bool surprise_removed;
 	u32 fw_release_number;
 	u16 init_wait_q_woken;
-- 
cgit v1.1


From 1247cc1f43905441821faa56d9a815e852afe235 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:42:02 +0530
Subject: mwifiex: add init parameter to init command routine

FW initialization routine can also be called while changing
virtual interface types.
This patch adds bool parameter "init" to init command routine
so as to differentiate between initialization during driver load
and change virtual interface handler.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/init.c      |  3 ++-
 drivers/net/wireless/mwifiex/main.h      |  2 +-
 drivers/net/wireless/mwifiex/sta_cmd.c   | 13 ++++++++-----
 drivers/net/wireless/mwifiex/sta_ioctl.c |  2 +-
 4 files changed, 12 insertions(+), 8 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 44babc3..2975b51 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -552,7 +552,8 @@ int mwifiex_init_fw(struct mwifiex_adapter *adapter)
 
 	for (i = 0; i < adapter->priv_num; i++) {
 		if (adapter->priv[i]) {
-			ret = mwifiex_sta_init_cmd(adapter->priv[i], first_sta);
+			ret = mwifiex_sta_init_cmd(adapter->priv[i], first_sta,
+						   true);
 			if (ret == -1)
 				return -1;
 
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 45b40af..9686bd8 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -989,7 +989,7 @@ void mwifiex_wmm_del_peer_ra_list(struct mwifiex_private *priv,
 				  const u8 *ra_addr);
 void *mwifiex_process_sta_txpd(struct mwifiex_private *, struct sk_buff *skb);
 void *mwifiex_process_uap_txpd(struct mwifiex_private *, struct sk_buff *skb);
-int mwifiex_sta_init_cmd(struct mwifiex_private *, u8 first_sta);
+int mwifiex_sta_init_cmd(struct mwifiex_private *, u8 first_sta, bool init);
 int mwifiex_cmd_802_11_scan(struct host_cmd_ds_command *cmd,
 			    struct mwifiex_scan_cmd_config *scan_cfg);
 void mwifiex_queue_scan_cmd(struct mwifiex_private *priv,
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index f7b920d..92a66e8 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1911,6 +1911,8 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
  *
  * This is called after firmware download to bring the card to
  * working state.
+ * Function is also called during reinitialization of virtual
+ * interfaces.
  *
  * The following commands are issued sequentially -
  *      - Set PCI-Express host buffer configuration (PCIE only)
@@ -1925,7 +1927,7 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
  *      - Set 11d control
  *      - Set MAC control (this must be the last command to initialize firmware)
  */
-int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
+int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta, bool init)
 {
 	struct mwifiex_adapter *adapter = priv->adapter;
 	int ret;
@@ -2059,9 +2061,6 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 				"11D: failed to enable 11D\n");
 	}
 
-	/* set last_init_cmd before sending the command */
-	priv->adapter->last_init_cmd = HostCmd_CMD_11N_CFG;
-
 	/* Send cmd to FW to configure 11n specific configuration
 	 * (Short GI, Channel BW, Green field support etc.) for transmit
 	 */
@@ -2069,7 +2068,11 @@ int mwifiex_sta_init_cmd(struct mwifiex_private *priv, u8 first_sta)
 	ret = mwifiex_send_cmd(priv, HostCmd_CMD_11N_CFG,
 			       HostCmd_ACT_GEN_SET, 0, &tx_cfg, true);
 
-	ret = -EINPROGRESS;
+	if (init) {
+		/* set last_init_cmd before sending the command */
+		priv->adapter->last_init_cmd = HostCmd_CMD_11N_CFG;
+		ret = -EINPROGRESS;
+	}
 
 	return ret;
 }
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 329cd51..2faa517 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -1162,7 +1162,7 @@ mwifiex_set_bss_role(struct mwifiex_private *priv, u8 bss_role)
 	mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
 			 HostCmd_ACT_GEN_SET, 0, NULL, true);
 
-	return mwifiex_sta_init_cmd(priv, false);
+	return mwifiex_sta_init_cmd(priv, false, false);
 }
 
 /*
-- 
cgit v1.1


From cf0523350c6f12bdffb06c7000326edb296ec450 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:42:03 +0530
Subject: mwifiex: manage virtual interface limits efficiently

Currently interface limits are checked by seeing if bss_mode for
particular priv is set. If bss_mode is not set, interface creation
is allowed. This patch adds framework to initializes maximum virtual
interfaces supported during load time and check current number of
interfaces created agains allowed interface limit during new virtual
interface creation.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 80 ++++++++++++++++++++++++++++-----
 drivers/net/wireless/mwifiex/decl.h     | 10 +++++
 drivers/net/wireless/mwifiex/init.c     |  3 ++
 drivers/net/wireless/mwifiex/main.h     | 21 +++++++++
 4 files changed, 102 insertions(+), 12 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 85f5019..a0221b5 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2185,13 +2185,20 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 	case NL80211_IFTYPE_UNSPECIFIED:
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_ADHOC:
-		priv = adapter->priv[MWIFIEX_BSS_TYPE_STA];
-		if (priv->bss_mode) {
+		if (adapter->curr_iface_comb.sta_intf ==
+		    adapter->iface_limit.sta_intf) {
 			wiphy_err(wiphy,
 				  "cannot create multiple sta/adhoc ifaces\n");
 			return ERR_PTR(-EINVAL);
 		}
 
+		priv = mwifiex_get_unused_priv(adapter);
+		if (!priv) {
+			wiphy_err(wiphy,
+				  "could not get free private struct\n");
+			return ERR_PTR(-EFAULT);
+		}
+
 		priv->wdev.wiphy = wiphy;
 		priv->wdev.iftype = NL80211_IFTYPE_STATION;
 
@@ -2208,13 +2215,20 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 
 		break;
 	case NL80211_IFTYPE_AP:
-		priv = adapter->priv[MWIFIEX_BSS_TYPE_UAP];
-
-		if (priv->bss_mode) {
-			wiphy_err(wiphy, "Can't create multiple AP interfaces");
+		if (adapter->curr_iface_comb.uap_intf ==
+		    adapter->iface_limit.uap_intf) {
+			wiphy_err(wiphy,
+				  "cannot create multiple AP ifaces\n");
 			return ERR_PTR(-EINVAL);
 		}
 
+		priv = mwifiex_get_unused_priv(adapter);
+		if (!priv) {
+			wiphy_err(wiphy,
+				  "could not get free private struct\n");
+			return ERR_PTR(-EFAULT);
+		}
+
 		priv->wdev.wiphy = wiphy;
 		priv->wdev.iftype = NL80211_IFTYPE_AP;
 
@@ -2228,15 +2242,21 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 
 		break;
 	case NL80211_IFTYPE_P2P_CLIENT:
-		priv = adapter->priv[MWIFIEX_BSS_TYPE_P2P];
-
-		if (priv->bss_mode) {
-			wiphy_err(wiphy, "Can't create multiple P2P ifaces");
+		if (adapter->curr_iface_comb.p2p_intf ==
+		    adapter->iface_limit.p2p_intf) {
+			wiphy_err(wiphy,
+				  "cannot create multiple P2P ifaces\n");
 			return ERR_PTR(-EINVAL);
 		}
 
-		priv->wdev.wiphy = wiphy;
+		priv = mwifiex_get_unused_priv(adapter);
+		if (!priv) {
+			wiphy_err(wiphy,
+				  "could not get free private struct\n");
+			return ERR_PTR(-EFAULT);
+		}
 
+		priv->wdev.wiphy = wiphy;
 		/* At start-up, wpa_supplicant tries to change the interface
 		 * to NL80211_IFTYPE_STATION if it is not managed mode.
 		 */
@@ -2329,6 +2349,23 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 	mwifiex_dev_debugfs_init(priv);
 #endif
 
+	switch (type) {
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		adapter->curr_iface_comb.sta_intf++;
+		break;
+	case NL80211_IFTYPE_AP:
+		adapter->curr_iface_comb.uap_intf++;
+		break;
+	case NL80211_IFTYPE_P2P_CLIENT:
+		adapter->curr_iface_comb.p2p_intf++;
+		break;
+	default:
+		wiphy_err(wiphy, "type not supported\n");
+		return ERR_PTR(-EINVAL);
+	}
+
 	return &priv->wdev;
 }
 EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf);
@@ -2339,12 +2376,13 @@ EXPORT_SYMBOL_GPL(mwifiex_add_virtual_intf);
 int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(wdev->netdev);
+	struct mwifiex_adapter *adapter = priv->adapter;
 
 #ifdef CONFIG_DEBUG_FS
 	mwifiex_dev_debugfs_remove(priv);
 #endif
 
-	mwifiex_stop_net_dev_queue(priv->netdev, priv->adapter);
+	mwifiex_stop_net_dev_queue(priv->netdev, adapter);
 
 	if (netif_carrier_ok(priv->netdev))
 		netif_carrier_off(priv->netdev);
@@ -2359,6 +2397,24 @@ int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 
 	priv->media_connected = false;
 
+	switch (priv->bss_mode) {
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		adapter->curr_iface_comb.sta_intf++;
+		break;
+	case NL80211_IFTYPE_AP:
+		adapter->curr_iface_comb.uap_intf++;
+		break;
+	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_P2P_GO:
+		adapter->curr_iface_comb.p2p_intf++;
+		break;
+	default:
+		dev_err(adapter->dev, "del_virtual_intf: type not supported\n");
+		break;
+	}
+
 	priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
 
 	if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA ||
diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h
index 7aa988e..4481ac4 100644
--- a/drivers/net/wireless/mwifiex/decl.h
+++ b/drivers/net/wireless/mwifiex/decl.h
@@ -104,6 +104,10 @@
 /* Rate index for OFDM 0 */
 #define MWIFIEX_RATE_INDEX_OFDM0   4
 
+#define MWIFIEX_MAX_STA_NUM		1
+#define MWIFIEX_MAX_UAP_NUM		1
+#define MWIFIEX_MAX_P2P_NUM		1
+
 enum mwifiex_bss_type {
 	MWIFIEX_BSS_TYPE_STA = 0,
 	MWIFIEX_BSS_TYPE_UAP = 1,
@@ -232,4 +236,10 @@ struct mwifiex_histogram_data {
 	atomic_t num_samples;
 };
 
+struct mwifiex_iface_comb {
+	u8 sta_intf;
+	u8 uap_intf;
+	u8 p2p_intf;
+};
+
 #endif /* !_MWIFIEX_DECL_H_ */
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 2975b51..1d1c3c8 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -298,6 +298,9 @@ static void mwifiex_init_adapter(struct mwifiex_adapter *adapter)
 	adapter->key_api_major_ver = 0;
 	adapter->key_api_minor_ver = 0;
 	memset(adapter->perm_addr, 0xff, ETH_ALEN);
+	adapter->iface_limit.sta_intf = MWIFIEX_MAX_STA_NUM;
+	adapter->iface_limit.uap_intf = MWIFIEX_MAX_UAP_NUM;
+	adapter->iface_limit.p2p_intf = MWIFIEX_MAX_P2P_NUM;
 
 	setup_timer(&adapter->wakeup_timer, wakeup_timer_fn,
 		    (unsigned long)adapter);
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 9686bd8..78304a7 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -730,6 +730,8 @@ struct mwifiex_if_ops {
 
 struct mwifiex_adapter {
 	u8 iface_type;
+	struct mwifiex_iface_comb iface_limit;
+	struct mwifiex_iface_comb curr_iface_comb;
 	struct mwifiex_private *priv[MWIFIEX_MAX_BSS_NUM];
 	u8 priv_num;
 	const struct firmware *firmware;
@@ -1150,6 +1152,25 @@ mwifiex_get_priv(struct mwifiex_adapter *adapter,
 }
 
 /*
+ * This function returns the first available unused private structure pointer.
+ */
+static inline struct mwifiex_private *
+mwifiex_get_unused_priv(struct mwifiex_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->priv_num; i++) {
+		if (adapter->priv[i]) {
+			if (adapter->priv[i]->bss_mode ==
+			    NL80211_IFTYPE_UNSPECIFIED)
+				break;
+		}
+	}
+
+	return ((i < adapter->priv_num) ? adapter->priv[i] : NULL);
+}
+
+/*
  * This function returns the driver private structure of a network device.
  */
 static inline struct mwifiex_private *
-- 
cgit v1.1


From 76c504ca1e7de8555cbf18a0ef08d29ee462c8eb Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:42:04 +0530
Subject: mwifiex: handle PS events on AP interface as well

This patch adds support to handle PS events on AP interface as well.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/cmdevt.c    | 36 ++++++++++++-----------------
 drivers/net/wireless/mwifiex/uap_event.c | 39 ++++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+), 22 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c
index 00586b2..c5a14ff 100644
--- a/drivers/net/wireless/mwifiex/cmdevt.c
+++ b/drivers/net/wireless/mwifiex/cmdevt.c
@@ -315,22 +315,19 @@ static int mwifiex_dnld_sleep_confirm_cmd(struct mwifiex_adapter *adapter)
 		adapter->dbg.num_cmd_sleep_cfm_host_to_card_failure++;
 		return -1;
 	}
-	if (GET_BSS_ROLE(mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY))
-	    == MWIFIEX_BSS_ROLE_STA) {
-		if (!le16_to_cpu(sleep_cfm_buf->resp_ctrl))
-			/* Response is not needed for sleep
-			   confirm command */
-			adapter->ps_state = PS_STATE_SLEEP;
-		else
-			adapter->ps_state = PS_STATE_SLEEP_CFM;
-
-		if (!le16_to_cpu(sleep_cfm_buf->resp_ctrl) &&
-		    (adapter->is_hs_configured &&
-		     !adapter->sleep_period.period)) {
-			adapter->pm_wakeup_card_req = true;
-			mwifiex_hs_activated_event(mwifiex_get_priv
-					(adapter, MWIFIEX_BSS_ROLE_STA), true);
-		}
+
+	if (!le16_to_cpu(sleep_cfm_buf->resp_ctrl))
+		/* Response is not needed for sleep confirm command */
+		adapter->ps_state = PS_STATE_SLEEP;
+	else
+		adapter->ps_state = PS_STATE_SLEEP_CFM;
+
+	if (!le16_to_cpu(sleep_cfm_buf->resp_ctrl) &&
+	    (adapter->is_hs_configured &&
+	     !adapter->sleep_period.period)) {
+		adapter->pm_wakeup_card_req = true;
+		mwifiex_hs_activated_event(mwifiex_get_priv
+				(adapter, MWIFIEX_BSS_ROLE_ANY), true);
 	}
 
 	return ret;
@@ -450,6 +447,7 @@ int mwifiex_process_event(struct mwifiex_adapter *adapter)
 				      EVENT_GET_BSS_TYPE(eventcause));
 	if (!priv)
 		priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
+
 	/* Clear BSS_NO_BITS from event */
 	eventcause &= EVENT_ID_MASK;
 	adapter->event_cause = eventcause;
@@ -462,12 +460,6 @@ int mwifiex_process_event(struct mwifiex_adapter *adapter)
 	}
 
 	dev_dbg(adapter->dev, "EVENT: cause: %#x\n", eventcause);
-	if (eventcause == EVENT_PS_SLEEP || eventcause == EVENT_PS_AWAKE) {
-		/* Handle PS_SLEEP/AWAKE events on STA */
-		priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_STA);
-		if (!priv)
-			priv = mwifiex_get_priv(adapter, MWIFIEX_BSS_ROLE_ANY);
-	}
 
 	if (priv->bss_role == MWIFIEX_BSS_ROLE_UAP)
 		ret = mwifiex_process_uap_event(priv);
diff --git a/drivers/net/wireless/mwifiex/uap_event.c b/drivers/net/wireless/mwifiex/uap_event.c
index 96ff397..9b4ca6f 100644
--- a/drivers/net/wireless/mwifiex/uap_event.c
+++ b/drivers/net/wireless/mwifiex/uap_event.c
@@ -178,6 +178,45 @@ int mwifiex_process_uap_event(struct mwifiex_private *priv)
 		dev_dbg(adapter->dev, "event: TX_STATUS Report\n");
 		mwifiex_parse_tx_status_event(priv, adapter->event_body);
 		break;
+	case EVENT_PS_SLEEP:
+		dev_dbg(adapter->dev, "info: EVENT: SLEEP\n");
+
+		adapter->ps_state = PS_STATE_PRE_SLEEP;
+
+		mwifiex_check_ps_cond(adapter);
+		break;
+
+	case EVENT_PS_AWAKE:
+		dev_dbg(adapter->dev, "info: EVENT: AWAKE\n");
+		if (!adapter->pps_uapsd_mode &&
+		    priv->media_connected && adapter->sleep_period.period) {
+				adapter->pps_uapsd_mode = true;
+				dev_dbg(adapter->dev,
+					"event: PPS/UAPSD mode activated\n");
+		}
+		adapter->tx_lock_flag = false;
+		if (adapter->pps_uapsd_mode && adapter->gen_null_pkt) {
+			if (mwifiex_check_last_packet_indication(priv)) {
+				if (adapter->data_sent) {
+					adapter->ps_state = PS_STATE_AWAKE;
+					adapter->pm_wakeup_card_req = false;
+					adapter->pm_wakeup_fw_try = false;
+					break;
+				}
+				if (!mwifiex_send_null_packet
+					(priv,
+					 MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET |
+					 MWIFIEX_TxPD_POWER_MGMT_LAST_PACKET))
+						adapter->ps_state =
+							PS_STATE_SLEEP;
+					return 0;
+			}
+		}
+		adapter->ps_state = PS_STATE_AWAKE;
+		adapter->pm_wakeup_card_req = false;
+		adapter->pm_wakeup_fw_try = false;
+
+		break;
 	default:
 		dev_dbg(adapter->dev, "event: unknown event id: %#x\n",
 			eventcause);
-- 
cgit v1.1


From 047eaaf64503c2902d1e054d5b944de18d14b28c Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:42:05 +0530
Subject: mwifiex: support conversion to any virtual interface type

Currently, we support virtual interface type change from
station<=>adhoc or station <=> p2p client/GO.
This patch adds support to change virtual interface type to
any of the type advertised in interface combinations.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/cfg80211.c  | 331 ++++++++++++++++++++++++++++---
 drivers/net/wireless/mwifiex/main.c      |   2 +-
 drivers/net/wireless/mwifiex/main.h      |   2 -
 drivers/net/wireless/mwifiex/sta_ioctl.c |  30 ---
 4 files changed, 301 insertions(+), 64 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index a0221b5..30ea94a 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -656,9 +656,6 @@ mwifiex_cfg80211_deinit_p2p(struct mwifiex_private *priv)
 {
 	u16 mode = P2P_MODE_DISABLE;
 
-	if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_STA)
-		mwifiex_set_bss_role(priv, MWIFIEX_BSS_ROLE_STA);
-
 	if (mwifiex_send_cmd(priv, HostCmd_CMD_P2P_MODE_CFG,
 			     HostCmd_ACT_GEN_SET, 0, &mode, true))
 		return -1;
@@ -715,12 +712,249 @@ mwifiex_cfg80211_init_p2p_go(struct mwifiex_private *priv)
 			     HostCmd_ACT_GEN_SET, 0, &mode, true))
 		return -1;
 
-	if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP)
-		mwifiex_set_bss_role(priv, MWIFIEX_BSS_ROLE_UAP);
+	return 0;
+}
+
+static int mwifiex_deinit_priv_params(struct mwifiex_private *priv)
+{
+	priv->mgmt_frame_mask = 0;
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_MGMT_FRAME_REG,
+			     HostCmd_ACT_GEN_SET, 0,
+			     &priv->mgmt_frame_mask, false)) {
+		dev_warn(priv->adapter->dev,
+			 "could not unregister mgmt frame rx\n");
+		return -1;
+	}
+
+	mwifiex_deauthenticate(priv, NULL);
+	mwifiex_free_priv(priv);
+	priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED;
+	priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+	priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM;
+
+	return 0;
+}
+
+static int
+mwifiex_init_new_priv_params(struct mwifiex_private *priv,
+			     struct net_device *dev,
+			     enum nl80211_iftype type)
+{
+	mwifiex_init_priv(priv);
+
+	priv->bss_mode = type;
+	priv->wdev.iftype = type;
+
+	mwifiex_init_priv_params(priv, priv->netdev);
+	priv->bss_started = 0;
+
+	switch (type) {
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		priv->bss_role =  MWIFIEX_BSS_ROLE_STA;
+		priv->bss_type = MWIFIEX_BSS_TYPE_STA;
+		break;
+	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_P2P_GO:
+		priv->bss_role =  MWIFIEX_BSS_ROLE_STA;
+		priv->bss_type = MWIFIEX_BSS_TYPE_P2P;
+		break;
+	case NL80211_IFTYPE_AP:
+		priv->bss_type = MWIFIEX_BSS_TYPE_UAP;
+		priv->bss_role = MWIFIEX_BSS_ROLE_UAP;
+		break;
+	default:
+		dev_err(priv->adapter->dev,
+			"%s: changing to %d not supported\n",
+			dev->name, type);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int
+mwifiex_change_vif_to_p2p(struct net_device *dev,
+			  enum nl80211_iftype curr_iftype,
+			  enum nl80211_iftype type, u32 *flags,
+			  struct vif_params *params)
+{
+	struct mwifiex_private *priv;
+	struct mwifiex_adapter *adapter;
+
+	priv = mwifiex_netdev_get_priv(dev);
+
+	if (!priv)
+		return -1;
+
+	adapter = priv->adapter;
+
+	if (adapter->curr_iface_comb.p2p_intf ==
+	    adapter->iface_limit.p2p_intf) {
+		dev_err(adapter->dev,
+			"cannot create multiple P2P ifaces\n");
+		return -1;
+	}
+
+	dev_dbg(priv->adapter->dev, "%s: changing role to p2p\n", dev->name);
+
+	if (mwifiex_deinit_priv_params(priv))
+		return -1;
+	if (mwifiex_init_new_priv_params(priv, dev, type))
+		return -1;
+
+	switch (type) {
+	case NL80211_IFTYPE_P2P_CLIENT:
+		if (mwifiex_cfg80211_init_p2p_client(priv))
+			return -EFAULT;
+		break;
+	case NL80211_IFTYPE_P2P_GO:
+		if (mwifiex_cfg80211_init_p2p_go(priv))
+			return -EFAULT;
+		break;
+	default:
+		dev_err(priv->adapter->dev,
+			"%s: changing to %d not supported\n",
+			dev->name, type);
+		return -EOPNOTSUPP;
+	}
+
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
+			     HostCmd_ACT_GEN_SET, 0, NULL, true))
+		return -1;
+
+	if (mwifiex_sta_init_cmd(priv, false, false))
+		return -1;
+
+	switch (curr_iftype) {
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		adapter->curr_iface_comb.sta_intf--;
+		break;
+	case NL80211_IFTYPE_AP:
+		adapter->curr_iface_comb.uap_intf--;
+		break;
+	default:
+		break;
+	}
+
+	adapter->curr_iface_comb.p2p_intf++;
+	dev->ieee80211_ptr->iftype = type;
 
 	return 0;
 }
 
+static int
+mwifiex_change_vif_to_sta_adhoc(struct net_device *dev,
+				enum nl80211_iftype curr_iftype,
+				enum nl80211_iftype type, u32 *flags,
+				struct vif_params *params)
+{
+	struct mwifiex_private *priv;
+	struct mwifiex_adapter *adapter;
+
+	priv = mwifiex_netdev_get_priv(dev);
+
+	if (!priv)
+		return -1;
+
+	adapter = priv->adapter;
+
+	if ((curr_iftype != NL80211_IFTYPE_P2P_CLIENT &&
+	     curr_iftype != NL80211_IFTYPE_P2P_GO) &&
+	    (adapter->curr_iface_comb.sta_intf ==
+	     adapter->iface_limit.sta_intf)) {
+		dev_err(adapter->dev,
+			"cannot create multiple station/adhoc ifaces\n");
+		return -1;
+	}
+
+	if (type == NL80211_IFTYPE_STATION)
+		dev_notice(adapter->dev,
+			   "%s: changing role to station\n", dev->name);
+	else
+		dev_notice(adapter->dev,
+			   "%s: changing role to adhoc\n", dev->name);
+
+	if (mwifiex_deinit_priv_params(priv))
+		return -1;
+	if (mwifiex_init_new_priv_params(priv, dev, type))
+		return -1;
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
+			     HostCmd_ACT_GEN_SET, 0, NULL, true))
+		return -1;
+	if (mwifiex_sta_init_cmd(priv, false, false))
+		return -1;
+
+	switch (curr_iftype) {
+	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_P2P_GO:
+		adapter->curr_iface_comb.p2p_intf--;
+		break;
+	case NL80211_IFTYPE_AP:
+		adapter->curr_iface_comb.uap_intf--;
+		break;
+	default:
+		break;
+	}
+
+	adapter->curr_iface_comb.sta_intf++;
+	dev->ieee80211_ptr->iftype = type;
+	return 0;
+}
+
+static int
+mwifiex_change_vif_to_ap(struct net_device *dev,
+			 enum nl80211_iftype curr_iftype,
+			 enum nl80211_iftype type, u32 *flags,
+			 struct vif_params *params)
+{
+	struct mwifiex_private *priv;
+	struct mwifiex_adapter *adapter;
+
+	priv = mwifiex_netdev_get_priv(dev);
+
+	if (!priv)
+		return -1;
+
+	adapter = priv->adapter;
+
+	if (adapter->curr_iface_comb.uap_intf ==
+	    adapter->iface_limit.uap_intf) {
+		dev_err(adapter->dev,
+			"cannot create multiple AP ifaces\n");
+		return -1;
+	}
+
+	dev_notice(adapter->dev, "%s: changing role to AP\n", dev->name);
+
+	if (mwifiex_deinit_priv_params(priv))
+		return -1;
+	if (mwifiex_init_new_priv_params(priv, dev, type))
+		return -1;
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
+			     HostCmd_ACT_GEN_SET, 0, NULL, true))
+		return -1;
+	if (mwifiex_sta_init_cmd(priv, false, false))
+		return -1;
+
+	switch (curr_iftype) {
+	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_P2P_GO:
+		adapter->curr_iface_comb.p2p_intf--;
+		break;
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+		adapter->curr_iface_comb.sta_intf--;
+		break;
+	default:
+		break;
+	}
+
+	adapter->curr_iface_comb.uap_intf++;
+	dev->ieee80211_ptr->iftype = type;
+	return 0;
+}
 /*
  * CFG802.11 operation handler to change interface type.
  */
@@ -730,19 +964,32 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 				     enum nl80211_iftype type, u32 *flags,
 				     struct vif_params *params)
 {
-	int ret;
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+	enum nl80211_iftype curr_iftype = dev->ieee80211_ptr->iftype;
 
-	switch (dev->ieee80211_ptr->iftype) {
+	switch (curr_iftype) {
 	case NL80211_IFTYPE_ADHOC:
 		switch (type) {
 		case NL80211_IFTYPE_STATION:
-			break;
+			priv->bss_mode = type;
+			priv->sec_info.authentication_mode =
+						   NL80211_AUTHTYPE_OPEN_SYSTEM;
+			dev->ieee80211_ptr->iftype = type;
+			mwifiex_deauthenticate(priv, NULL);
+			return mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
+						HostCmd_ACT_GEN_SET, 0, NULL,
+						true);
+		case NL80211_IFTYPE_P2P_CLIENT:
+		case NL80211_IFTYPE_P2P_GO:
+			return mwifiex_change_vif_to_p2p(dev, curr_iftype,
+							 type, flags, params);
+		case NL80211_IFTYPE_AP:
+			return mwifiex_change_vif_to_ap(dev, curr_iftype, type,
+							flags, params);
 		case NL80211_IFTYPE_UNSPECIFIED:
 			wiphy_warn(wiphy, "%s: kept type as IBSS\n", dev->name);
 		case NL80211_IFTYPE_ADHOC:	/* This shouldn't happen */
 			return 0;
-		case NL80211_IFTYPE_AP:
 		default:
 			wiphy_err(wiphy, "%s: changing to %d not supported\n",
 				  dev->name, type);
@@ -752,22 +999,25 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 	case NL80211_IFTYPE_STATION:
 		switch (type) {
 		case NL80211_IFTYPE_ADHOC:
-			break;
-		case NL80211_IFTYPE_P2P_CLIENT:
-			if (mwifiex_cfg80211_init_p2p_client(priv))
-				return -EFAULT;
+			priv->bss_mode = type;
+			priv->sec_info.authentication_mode =
+						   NL80211_AUTHTYPE_OPEN_SYSTEM;
 			dev->ieee80211_ptr->iftype = type;
-			return 0;
+			mwifiex_deauthenticate(priv, NULL);
+			return mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
+						HostCmd_ACT_GEN_SET, 0, NULL,
+						true);
+		case NL80211_IFTYPE_P2P_CLIENT:
 		case NL80211_IFTYPE_P2P_GO:
-			if (mwifiex_cfg80211_init_p2p_go(priv))
-				return -EFAULT;
-			dev->ieee80211_ptr->iftype = type;
-			return 0;
+			return mwifiex_change_vif_to_p2p(dev, curr_iftype,
+							 type, flags, params);
+		case NL80211_IFTYPE_AP:
+			return mwifiex_change_vif_to_ap(dev, curr_iftype, type,
+							flags, params);
 		case NL80211_IFTYPE_UNSPECIFIED:
 			wiphy_warn(wiphy, "%s: kept type as STA\n", dev->name);
 		case NL80211_IFTYPE_STATION:	/* This shouldn't happen */
 			return 0;
-		case NL80211_IFTYPE_AP:
 		default:
 			wiphy_err(wiphy, "%s: changing to %d not supported\n",
 				  dev->name, type);
@@ -776,12 +1026,20 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 		break;
 	case NL80211_IFTYPE_AP:
 		switch (type) {
+		case NL80211_IFTYPE_ADHOC:
+		case NL80211_IFTYPE_STATION:
+			return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype,
+							       type, flags,
+							       params);
+			break;
+		case NL80211_IFTYPE_P2P_CLIENT:
+		case NL80211_IFTYPE_P2P_GO:
+			return mwifiex_change_vif_to_p2p(dev, curr_iftype,
+							 type, flags, params);
 		case NL80211_IFTYPE_UNSPECIFIED:
 			wiphy_warn(wiphy, "%s: kept type as AP\n", dev->name);
 		case NL80211_IFTYPE_AP:		/* This shouldn't happen */
 			return 0;
-		case NL80211_IFTYPE_ADHOC:
-		case NL80211_IFTYPE_STATION:
 		default:
 			wiphy_err(wiphy, "%s: changing to %d not supported\n",
 				  dev->name, type);
@@ -792,11 +1050,30 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 	case NL80211_IFTYPE_P2P_GO:
 		switch (type) {
 		case NL80211_IFTYPE_STATION:
-			if (mwifiex_cfg80211_deinit_p2p(priv))
+			if (mwifiex_cfg80211_init_p2p_client(priv))
 				return -EFAULT;
 			dev->ieee80211_ptr->iftype = type;
+			break;
+		case NL80211_IFTYPE_ADHOC:
+			if (mwifiex_cfg80211_deinit_p2p(priv))
+				return -EFAULT;
+			return mwifiex_change_vif_to_sta_adhoc(dev, curr_iftype,
+							       type, flags,
+							       params);
+			break;
+		case NL80211_IFTYPE_AP:
+			if (mwifiex_cfg80211_deinit_p2p(priv))
+				return -EFAULT;
+			return mwifiex_change_vif_to_ap(dev, curr_iftype, type,
+							flags, params);
+		case NL80211_IFTYPE_UNSPECIFIED:
+			wiphy_warn(wiphy, "%s: kept type as P2P\n", dev->name);
+		case NL80211_IFTYPE_P2P_CLIENT:
+		case NL80211_IFTYPE_P2P_GO:
 			return 0;
 		default:
+			wiphy_err(wiphy, "%s: changing to %d not supported\n",
+				  dev->name, type);
 			return -EOPNOTSUPP;
 		}
 		break;
@@ -806,16 +1083,8 @@ mwifiex_cfg80211_change_virtual_intf(struct wiphy *wiphy,
 		return -EOPNOTSUPP;
 	}
 
-	dev->ieee80211_ptr->iftype = type;
-	priv->bss_mode = type;
-	mwifiex_deauthenticate(priv, NULL);
-
-	priv->sec_info.authentication_mode = NL80211_AUTHTYPE_OPEN_SYSTEM;
-
-	ret = mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
-			       HostCmd_ACT_GEN_SET, 0, NULL, true);
 
-	return ret;
+	return 0;
 }
 
 static void
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index cb9cab2..30e5193 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -961,7 +961,7 @@ static const struct net_device_ops mwifiex_netdev_ops = {
  * In addition, the CFG80211 work queue is also created.
  */
 void mwifiex_init_priv_params(struct mwifiex_private *priv,
-						struct net_device *dev)
+			      struct net_device *dev)
 {
 	dev->netdev_ops = &mwifiex_netdev_ops;
 	dev->destructor = free_netdev;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 78304a7..9e839cd 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1261,8 +1261,6 @@ int mwifiex_remain_on_chan_cfg(struct mwifiex_private *priv, u16 action,
 			       struct ieee80211_channel *chan,
 			       unsigned int duration);
 
-int mwifiex_set_bss_role(struct mwifiex_private *priv, u8 bss_role);
-
 int mwifiex_get_stats_info(struct mwifiex_private *priv,
 			   struct mwifiex_ds_get_stats *log);
 
diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c
index 2faa517..0599e41 100644
--- a/drivers/net/wireless/mwifiex/sta_ioctl.c
+++ b/drivers/net/wireless/mwifiex/sta_ioctl.c
@@ -1135,36 +1135,6 @@ mwifiex_remain_on_chan_cfg(struct mwifiex_private *priv, u16 action,
 	return roc_cfg.status;
 }
 
-int
-mwifiex_set_bss_role(struct mwifiex_private *priv, u8 bss_role)
-{
-	if (GET_BSS_ROLE(priv) == bss_role) {
-		dev_dbg(priv->adapter->dev,
-			"info: already in the desired role.\n");
-		return 0;
-	}
-
-	mwifiex_free_priv(priv);
-	mwifiex_init_priv(priv);
-
-	priv->bss_role = bss_role;
-	switch (bss_role) {
-	case MWIFIEX_BSS_ROLE_UAP:
-		priv->bss_mode = NL80211_IFTYPE_AP;
-		break;
-	case MWIFIEX_BSS_ROLE_STA:
-	case MWIFIEX_BSS_ROLE_ANY:
-	default:
-		priv->bss_mode = NL80211_IFTYPE_STATION;
-		break;
-	}
-
-	mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
-			 HostCmd_ACT_GEN_SET, 0, NULL, true);
-
-	return mwifiex_sta_init_cmd(priv, false, false);
-}
-
 /*
  * Sends IOCTL request to get statistics information.
  *
-- 
cgit v1.1


From 6144369f8b4bb8a74a1b0dbe06340df2a69b79c1 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:16 +0530
Subject: mwifiex: do not send regulatory update while starting AP

When regulatory domain changes, cfg80211 already issues request
to change regulatory domain to driver via reg_notifier.
There is no need to set regulatory again during start_ap.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 30ea94a..1acccc5 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1739,7 +1739,6 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 		priv->adapter->config_bands = config_bands;
 
 	mwifiex_set_uap_rates(bss_cfg, params);
-	mwifiex_send_domain_info_cmd_fw(wiphy);
 
 	if (mwifiex_set_secure_params(priv, bss_cfg, params)) {
 		kfree(bss_cfg);
-- 
cgit v1.1


From 35c739b50d78a2e2e5b08c53b3143d2c94d50412 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:17 +0530
Subject: mwifiex: store AP configuration in private structure

Store AP configuration in private structure so that we know
current AP configuration.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 2 ++
 drivers/net/wireless/mwifiex/main.h     | 1 +
 2 files changed, 3 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 1acccc5..8e07564 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1655,6 +1655,7 @@ static int mwifiex_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *dev)
 		wiphy_err(wiphy, "Failed to delete mgmt IEs!\n");
 
 	priv->ap_11n_enabled = 0;
+	memset(&priv->bss_cfg, 0, sizeof(priv->bss_cfg));
 
 	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP,
 			     HostCmd_ACT_GEN_SET, 0, NULL, true)) {
@@ -1782,6 +1783,7 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 		return -1;
 	}
 
+	memcpy(&priv->bss_cfg, bss_cfg, sizeof(priv->bss_cfg));
 	kfree(bss_cfg);
 
 	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_START,
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 9e839cd..673252a 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -577,6 +577,7 @@ struct mwifiex_private {
 	unsigned long csa_expire_time;
 	u8 del_list_idx;
 	bool hs2_enabled;
+	struct mwifiex_uap_bss_param bss_cfg;
 	struct station_parameters *sta_params;
 	struct sk_buff_head tdls_txq;
 	u8 check_tdls_tx;
-- 
cgit v1.1


From b0d4c5ec9730f7544772f50f84dc0dc730b1d551 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:18 +0530
Subject: mwifiex: update IEs after AP has started

This patch moves IE management routine to end of start_ap handler.
IEs now would be updated after AP has started.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 8e07564..ceeaeac 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1681,8 +1681,6 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 
 	if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP)
 		return -1;
-	if (mwifiex_set_mgmt_ies(priv, &params->beacon))
-		return -1;
 
 	bss_cfg = kzalloc(sizeof(struct mwifiex_uap_bss_param), GFP_KERNEL);
 	if (!bss_cfg)
@@ -1783,6 +1781,9 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 		return -1;
 	}
 
+	if (mwifiex_set_mgmt_ies(priv, &params->beacon))
+		return -1;
+
 	memcpy(&priv->bss_cfg, bss_cfg, sizeof(priv->bss_cfg));
 	kfree(bss_cfg);
 
-- 
cgit v1.1


From b654ca182a2f54c3e3ce682420045f7dd79c8187 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:19 +0530
Subject: mwifiex: refactor start_ap handler

Refactor mwifiex_cfg80211_start_ap by creating separate function
to set AP channel and another for configuring other AP parameters
and starting AP.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/cfg80211.c | 68 ++++-----------------------------
 drivers/net/wireless/mwifiex/main.h     |  4 ++
 drivers/net/wireless/mwifiex/uap_cmd.c  | 65 +++++++++++++++++++++++++++++++
 3 files changed, 77 insertions(+), 60 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index ceeaeac..2e0834c 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1677,7 +1677,6 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 {
 	struct mwifiex_uap_bss_param *bss_cfg;
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
-	u8 config_bands = 0;
 
 	if (GET_BSS_ROLE(priv) != MWIFIEX_BSS_ROLE_UAP)
 		return -1;
@@ -1697,6 +1696,11 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 		memcpy(bss_cfg->ssid.ssid, params->ssid, params->ssid_len);
 		bss_cfg->ssid.ssid_len = params->ssid_len;
 	}
+	if (params->inactivity_timeout > 0) {
+		/* sta_ao_timer/ps_sta_ao_timer is in unit of 100ms */
+		bss_cfg->sta_ao_timer = 10 * params->inactivity_timeout;
+		bss_cfg->ps_sta_ao_timer = 10 * params->inactivity_timeout;
+	}
 
 	switch (params->hidden_ssid) {
 	case NL80211_HIDDEN_SSID_NOT_IN_USE:
@@ -1712,31 +1716,7 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 		return -EINVAL;
 	}
 
-	bss_cfg->channel = ieee80211_frequency_to_channel(
-				params->chandef.chan->center_freq);
-
-	/* Set appropriate bands */
-	if (params->chandef.chan->band == IEEE80211_BAND_2GHZ) {
-		bss_cfg->band_cfg = BAND_CONFIG_BG;
-		config_bands = BAND_B | BAND_G;
-
-		if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
-			config_bands |= BAND_GN;
-	} else {
-		bss_cfg->band_cfg = BAND_CONFIG_A;
-		config_bands = BAND_A;
-
-		if (params->chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
-			config_bands |= BAND_AN;
-
-		if (params->chandef.width > NL80211_CHAN_WIDTH_40)
-			config_bands |= BAND_AAC;
-	}
-
-	if (!((config_bands | priv->adapter->fw_bands) &
-	      ~priv->adapter->fw_bands))
-		priv->adapter->config_bands = config_bands;
-
+	mwifiex_uap_set_channel(bss_cfg, params->chandef);
 	mwifiex_set_uap_rates(bss_cfg, params);
 
 	if (mwifiex_set_secure_params(priv, bss_cfg, params)) {
@@ -1760,23 +1740,8 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 
 	mwifiex_set_wmm_params(priv, bss_cfg, params);
 
-	if (params->inactivity_timeout > 0) {
-		/* sta_ao_timer/ps_sta_ao_timer is in unit of 100ms */
-		bss_cfg->sta_ao_timer = 10 * params->inactivity_timeout;
-		bss_cfg->ps_sta_ao_timer = 10 * params->inactivity_timeout;
-	}
-
-	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP,
-			     HostCmd_ACT_GEN_SET, 0, NULL, true)) {
-		wiphy_err(wiphy, "Failed to stop the BSS\n");
-		kfree(bss_cfg);
-		return -1;
-	}
-
-	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_SYS_CONFIG,
-			     HostCmd_ACT_GEN_SET,
-			     UAP_BSS_PARAMS_I, bss_cfg, false)) {
-		wiphy_err(wiphy, "Failed to set the SSID\n");
+	if (mwifiex_config_start_uap(priv, bss_cfg)) {
+		wiphy_err(wiphy, "Failed to start AP\n");
 		kfree(bss_cfg);
 		return -1;
 	}
@@ -1786,23 +1751,6 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 
 	memcpy(&priv->bss_cfg, bss_cfg, sizeof(priv->bss_cfg));
 	kfree(bss_cfg);
-
-	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_START,
-			     HostCmd_ACT_GEN_SET, 0, NULL, false)) {
-		wiphy_err(wiphy, "Failed to start the BSS\n");
-		return -1;
-	}
-
-	if (priv->sec_info.wep_enabled)
-		priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
-	else
-		priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
-
-	if (mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
-			     HostCmd_ACT_GEN_SET, 0,
-			     &priv->curr_pkt_filter, true))
-		return -1;
-
 	return 0;
 }
 
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 673252a..0c75eff 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1321,6 +1321,10 @@ int mwifiex_set_mgmt_ies(struct mwifiex_private *priv,
 			 struct cfg80211_beacon_data *data);
 int mwifiex_del_mgmt_ies(struct mwifiex_private *priv);
 u8 *mwifiex_11d_code_2_region(u8 code);
+void mwifiex_uap_set_channel(struct mwifiex_uap_bss_param *bss_cfg,
+			     struct cfg80211_chan_def chandef);
+int mwifiex_config_start_uap(struct mwifiex_private *priv,
+			     struct mwifiex_uap_bss_param *bss_cfg);
 void mwifiex_uap_del_sta_data(struct mwifiex_private *priv,
 			      struct mwifiex_sta_node *node);
 
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index 0f347fd..baf5314 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -769,3 +769,68 @@ int mwifiex_uap_prepare_cmd(struct mwifiex_private *priv, u16 cmd_no,
 
 	return 0;
 }
+
+void mwifiex_uap_set_channel(struct mwifiex_uap_bss_param *bss_cfg,
+			     struct cfg80211_chan_def chandef)
+{
+	u8 config_bands = 0;
+
+	bss_cfg->channel = ieee80211_frequency_to_channel(
+						     chandef.chan->center_freq);
+
+	/* Set appropriate bands */
+	if (chandef.chan->band == IEEE80211_BAND_2GHZ) {
+		bss_cfg->band_cfg = BAND_CONFIG_BG;
+		config_bands = BAND_B | BAND_G;
+
+		if (chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
+			config_bands |= BAND_GN;
+	} else {
+		bss_cfg->band_cfg = BAND_CONFIG_A;
+		config_bands = BAND_A;
+
+		if (chandef.width > NL80211_CHAN_WIDTH_20_NOHT)
+			config_bands |= BAND_AN;
+
+		if (chandef.width > NL80211_CHAN_WIDTH_40)
+			config_bands |= BAND_AAC;
+	}
+}
+
+int mwifiex_config_start_uap(struct mwifiex_private *priv,
+			     struct mwifiex_uap_bss_param *bss_cfg)
+{
+	if (mwifiex_del_mgmt_ies(priv))
+		dev_err(priv->adapter->dev, "Failed to delete mgmt IEs!\n");
+
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_STOP,
+			     HostCmd_ACT_GEN_SET, 0, NULL, true)) {
+		dev_err(priv->adapter->dev, "Failed to stop the BSS\n");
+		return -1;
+	}
+
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_SYS_CONFIG,
+			     HostCmd_ACT_GEN_SET,
+			     UAP_BSS_PARAMS_I, bss_cfg, false)) {
+		dev_err(priv->adapter->dev, "Failed to set the SSID\n");
+		return -1;
+	}
+
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_UAP_BSS_START,
+			     HostCmd_ACT_GEN_SET, 0, NULL, false)) {
+		dev_err(priv->adapter->dev, "Failed to start the BSS\n");
+		return -1;
+	}
+
+	if (priv->sec_info.wep_enabled)
+		priv->curr_pkt_filter |= HostCmd_ACT_MAC_WEP_ENABLE;
+	else
+		priv->curr_pkt_filter &= ~HostCmd_ACT_MAC_WEP_ENABLE;
+
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_MAC_CONTROL,
+			     HostCmd_ACT_GEN_SET, 0,
+			     &priv->curr_pkt_filter, true))
+		return -1;
+
+	return 0;
+}
-- 
cgit v1.1


From 2ade5667e2e0244549818f16e2520141661e8bcd Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:20 +0530
Subject: mwifiex: separate function for parsing head and tail IEs

Head & Tail IEs are supposed to be added to beacon and probe response.
This patch adds separate function for parsing head and tail IEs from
cfg80211_beacon_data and sets them to FW.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/ie.c   | 81 +++++++++++++++++++++----------------
 drivers/net/wireless/mwifiex/main.c |  2 +-
 drivers/net/wireless/mwifiex/main.h |  2 +-
 3 files changed, 48 insertions(+), 37 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/ie.c b/drivers/net/wireless/mwifiex/ie.c
index b933794..a6af7b8 100644
--- a/drivers/net/wireless/mwifiex/ie.c
+++ b/drivers/net/wireless/mwifiex/ie.c
@@ -317,27 +317,26 @@ done:
 	return ret;
 }
 
-/* This function parses different IEs-tail IEs, beacon IEs, probe response IEs,
- * association response IEs from cfg80211_ap_settings function and sets these IE
- * to FW.
+/* This function parses  head and tail IEs, from cfg80211_beacon_data and sets
+ * these IE to FW.
  */
-int mwifiex_set_mgmt_ies(struct mwifiex_private *priv,
-			 struct cfg80211_beacon_data *info)
+static int mwifiex_uap_set_head_tail_ies(struct mwifiex_private *priv,
+					 struct cfg80211_beacon_data *info)
 {
 	struct mwifiex_ie *gen_ie;
-	struct ieee_types_header *rsn_ie, *wpa_ie = NULL;
-	u16 rsn_idx = MWIFIEX_AUTO_IDX_MASK, ie_len = 0;
+	struct ieee_types_header *rsn_ie = NULL, *wpa_ie = NULL;
+	u16 gen_idx = MWIFIEX_AUTO_IDX_MASK, ie_len = 0;
 	const u8 *vendor_ie;
 
-	if (info->tail && info->tail_len) {
-		gen_ie = kzalloc(sizeof(struct mwifiex_ie), GFP_KERNEL);
-		if (!gen_ie)
-			return -ENOMEM;
-		gen_ie->ie_index = cpu_to_le16(rsn_idx);
-		gen_ie->mgmt_subtype_mask = cpu_to_le16(MGMT_MASK_BEACON |
-							MGMT_MASK_PROBE_RESP |
-							MGMT_MASK_ASSOC_RESP);
+	gen_ie = kzalloc(sizeof(*gen_ie), GFP_KERNEL);
+	if (!gen_ie)
+		return -ENOMEM;
+	gen_ie->ie_index = cpu_to_le16(gen_idx);
+	gen_ie->mgmt_subtype_mask = cpu_to_le16(MGMT_MASK_BEACON |
+						MGMT_MASK_PROBE_RESP |
+						MGMT_MASK_ASSOC_RESP);
 
+	if (info->tail && info->tail_len) {
 		rsn_ie = (void *)cfg80211_find_ie(WLAN_EID_RSN,
 						  info->tail, info->tail_len);
 		if (rsn_ie) {
@@ -357,20 +356,33 @@ int mwifiex_set_mgmt_ies(struct mwifiex_private *priv,
 			ie_len += wpa_ie->len + 2;
 			gen_ie->ie_length = cpu_to_le16(ie_len);
 		}
+	}
 
-		if (rsn_ie || wpa_ie) {
-			if (mwifiex_update_uap_custom_ie(priv, gen_ie, &rsn_idx,
-							 NULL, NULL,
-							 NULL, NULL)) {
-				kfree(gen_ie);
-				return -1;
-			}
-			priv->rsn_idx = rsn_idx;
+	if (rsn_ie || wpa_ie) {
+		if (mwifiex_update_uap_custom_ie(priv, gen_ie, &gen_idx, NULL,
+						 NULL, NULL, NULL)) {
+			kfree(gen_ie);
+			return -1;
 		}
-
-		kfree(gen_ie);
+		priv->gen_idx = gen_idx;
 	}
 
+	kfree(gen_ie);
+	return 0;
+}
+
+/* This function parses different IEs-head & tail IEs, beacon IEs,
+ * probe response IEs, association response IEs from cfg80211_ap_settings
+ * function and sets these IE to FW.
+ */
+int mwifiex_set_mgmt_ies(struct mwifiex_private *priv,
+			 struct cfg80211_beacon_data *info)
+{
+	int ret;
+
+	ret = mwifiex_uap_set_head_tail_ies(priv, info);
+		return ret;
+
 	return mwifiex_set_mgmt_beacon_data_ies(priv, info);
 }
 
@@ -378,25 +390,25 @@ int mwifiex_set_mgmt_ies(struct mwifiex_private *priv,
 int mwifiex_del_mgmt_ies(struct mwifiex_private *priv)
 {
 	struct mwifiex_ie *beacon_ie = NULL, *pr_ie = NULL;
-	struct mwifiex_ie *ar_ie = NULL, *rsn_ie = NULL;
+	struct mwifiex_ie *ar_ie = NULL, *gen_ie = NULL;
 	int ret = 0;
 
-	if (priv->rsn_idx != MWIFIEX_AUTO_IDX_MASK) {
-		rsn_ie = kmalloc(sizeof(struct mwifiex_ie), GFP_KERNEL);
-		if (!rsn_ie)
+	if (priv->gen_idx != MWIFIEX_AUTO_IDX_MASK) {
+		gen_ie = kmalloc(sizeof(*gen_ie), GFP_KERNEL);
+		if (!gen_ie)
 			return -ENOMEM;
 
-		rsn_ie->ie_index = cpu_to_le16(priv->rsn_idx);
-		rsn_ie->mgmt_subtype_mask = cpu_to_le16(MWIFIEX_DELETE_MASK);
-		rsn_ie->ie_length = 0;
-		if (mwifiex_update_uap_custom_ie(priv, rsn_ie, &priv->rsn_idx,
+		gen_ie->ie_index = cpu_to_le16(priv->gen_idx);
+		gen_ie->mgmt_subtype_mask = cpu_to_le16(MWIFIEX_DELETE_MASK);
+		gen_ie->ie_length = 0;
+		if (mwifiex_update_uap_custom_ie(priv, gen_ie, &priv->gen_idx,
 						 NULL, &priv->proberesp_idx,
 						 NULL, &priv->assocresp_idx)) {
 			ret = -1;
 			goto done;
 		}
 
-		priv->rsn_idx = MWIFIEX_AUTO_IDX_MASK;
+		priv->gen_idx = MWIFIEX_AUTO_IDX_MASK;
 	}
 
 	if (priv->beacon_idx != MWIFIEX_AUTO_IDX_MASK) {
@@ -440,7 +452,6 @@ done:
 	kfree(beacon_ie);
 	kfree(pr_ie);
 	kfree(ar_ie);
-	kfree(rsn_ie);
 
 	return ret;
 }
diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c
index 30e5193..7e74b4f 100644
--- a/drivers/net/wireless/mwifiex/main.c
+++ b/drivers/net/wireless/mwifiex/main.c
@@ -973,7 +973,7 @@ void mwifiex_init_priv_params(struct mwifiex_private *priv,
 	priv->beacon_idx = MWIFIEX_AUTO_IDX_MASK;
 	priv->proberesp_idx = MWIFIEX_AUTO_IDX_MASK;
 	priv->assocresp_idx = MWIFIEX_AUTO_IDX_MASK;
-	priv->rsn_idx = MWIFIEX_AUTO_IDX_MASK;
+	priv->gen_idx = MWIFIEX_AUTO_IDX_MASK;
 	priv->num_tx_timeout = 0;
 	ether_addr_copy(priv->curr_addr, priv->adapter->perm_addr);
 	memcpy(dev->dev_addr, priv->curr_addr, ETH_ALEN);
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 0c75eff..c5ac20d 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -567,7 +567,7 @@ struct mwifiex_private {
 	u16 beacon_idx;
 	u16 proberesp_idx;
 	u16 assocresp_idx;
-	u16 rsn_idx;
+	u16 gen_idx;
 	u8 ap_11n_enabled;
 	u8 ap_11ac_enabled;
 	u32 mgmt_frame_mask;
-- 
cgit v1.1


From 85afb18621be393f925ed85f96a80d52e3706578 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:21 +0530
Subject: mwifiex: add cfg80211 start_radar_detection handler

This patch adds support for cfg80211 start_radar_detection handler.
Upon reception of start_radar_detection, driver prepares radar detect
command to FW.

Delayed work is queued for CAC time which sends radar detection finished
event to cfg80211.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/11h.c         | 66 ++++++++++++++++++++++++++++++
 drivers/net/wireless/mwifiex/cfg80211.c    | 59 ++++++++++++++++++++++++++
 drivers/net/wireless/mwifiex/decl.h        |  6 +++
 drivers/net/wireless/mwifiex/fw.h          | 13 ++++++
 drivers/net/wireless/mwifiex/init.c        |  1 +
 drivers/net/wireless/mwifiex/main.h        | 10 +++++
 drivers/net/wireless/mwifiex/sta_cmd.c     |  4 ++
 drivers/net/wireless/mwifiex/sta_cmdresp.c |  2 +
 drivers/net/wireless/mwifiex/uap_cmd.c     |  5 +++
 9 files changed, 166 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/11h.c b/drivers/net/wireless/mwifiex/11h.c
index f23b647a..8832c83 100644
--- a/drivers/net/wireless/mwifiex/11h.c
+++ b/drivers/net/wireless/mwifiex/11h.c
@@ -99,3 +99,69 @@ void mwifiex_11h_process_join(struct mwifiex_private *priv, u8 **buffer,
 		bss_desc->cap_info_bitmap &= ~WLAN_CAPABILITY_SPECTRUM_MGMT;
 	}
 }
+
+/* This is DFS CAC work queue function.
+ * This delayed work emits CAC finished event for cfg80211 if
+ * CAC was started earlier.
+ */
+void mwifiex_dfs_cac_work_queue(struct work_struct *work)
+{
+	struct cfg80211_chan_def chandef;
+	struct delayed_work *delayed_work =
+			container_of(work, struct delayed_work, work);
+	struct mwifiex_private *priv =
+			container_of(delayed_work, struct mwifiex_private,
+				     dfs_cac_work);
+
+	if (WARN_ON(!priv))
+		return;
+
+	chandef = priv->dfs_chandef;
+	if (priv->wdev.cac_started) {
+		dev_dbg(priv->adapter->dev,
+			"CAC timer finished; No radar detected\n");
+		cfg80211_cac_event(priv->netdev, &chandef,
+				   NL80211_RADAR_CAC_FINISHED,
+				   GFP_KERNEL);
+	}
+}
+
+/* This function prepares channel report request command to FW for
+ * starting radar detection.
+ */
+int mwifiex_cmd_issue_chan_report_request(struct mwifiex_private *priv,
+					  struct host_cmd_ds_command *cmd,
+					  void *data_buf)
+{
+	struct host_cmd_ds_chan_rpt_req *cr_req = &cmd->params.chan_rpt_req;
+	struct mwifiex_radar_params *radar_params = (void *)data_buf;
+
+	cmd->command = cpu_to_le16(HostCmd_CMD_CHAN_REPORT_REQUEST);
+	cmd->size = cpu_to_le16(S_DS_GEN);
+	le16_add_cpu(&cmd->size, sizeof(struct host_cmd_ds_chan_rpt_req));
+
+	cr_req->chan_desc.start_freq = cpu_to_le16(MWIFIEX_A_BAND_START_FREQ);
+	cr_req->chan_desc.chan_num = radar_params->chandef->chan->hw_value;
+	cr_req->chan_desc.chan_width = radar_params->chandef->width;
+	cr_req->msec_dwell_time = cpu_to_le32(radar_params->cac_time_ms);
+
+	dev_dbg(priv->adapter->dev,
+		"11h: issuing DFS Radar check for channel=%d\n",
+		radar_params->chandef->chan->hw_value);
+
+	return 0;
+}
+
+/* This function is to abort ongoing CAC upon stopping AP operations
+ * or during unload.
+ */
+void mwifiex_abort_cac(struct mwifiex_private *priv)
+{
+	if (priv->wdev.cac_started) {
+		dev_dbg(priv->adapter->dev,
+			"Aborting delayed work for CAC.\n");
+		cancel_delayed_work_sync(&priv->dfs_cac_work);
+		cfg80211_cac_event(priv->netdev, &priv->dfs_chandef,
+				   NL80211_RADAR_CAC_ABORTED, GFP_KERNEL);
+	}
+}
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 2e0834c..7a969fd 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1651,6 +1651,8 @@ static int mwifiex_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *dev)
 {
 	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
 
+	mwifiex_abort_cac(priv);
+
 	if (mwifiex_del_mgmt_ies(priv))
 		wiphy_err(wiphy, "Failed to delete mgmt IEs!\n");
 
@@ -2383,6 +2385,7 @@ mwifiex_setup_ht_caps(struct ieee80211_sta_ht_cap *ht_info,
 	ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
 }
 
+#define MWIFIEX_MAX_WQ_LEN  30
 /*
  *  create a new virtual interface with the given name
  */
@@ -2396,6 +2399,7 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 	struct mwifiex_private *priv;
 	struct net_device *dev;
 	void *mdev_priv;
+	char dfs_cac_str[MWIFIEX_MAX_WQ_LEN];
 
 	if (!adapter)
 		return ERR_PTR(-EFAULT);
@@ -2560,6 +2564,24 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 		return ERR_PTR(-EFAULT);
 	}
 
+	strcpy(dfs_cac_str, "MWIFIEX_DFS_CAC");
+	strcat(dfs_cac_str, name);
+	priv->dfs_cac_workqueue = alloc_workqueue(dfs_cac_str,
+						  WQ_HIGHPRI |
+						  WQ_MEM_RECLAIM |
+						  WQ_UNBOUND, 1);
+	if (!priv->dfs_cac_workqueue) {
+		wiphy_err(wiphy, "cannot register virtual network device\n");
+		free_netdev(dev);
+		priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+		priv->netdev = NULL;
+		memset(&priv->wdev, 0, sizeof(priv->wdev));
+		priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED;
+		return ERR_PTR(-ENOMEM);
+	}
+
+	INIT_DELAYED_WORK(&priv->dfs_cac_work, mwifiex_dfs_cac_work_queue);
+
 	sema_init(&priv->async_sem, 1);
 
 	dev_dbg(adapter->dev, "info: %s: Marvell 802.11 Adapter\n", dev->name);
@@ -2609,6 +2631,12 @@ int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 	if (wdev->netdev->reg_state == NETREG_REGISTERED)
 		unregister_netdevice(wdev->netdev);
 
+	if (priv->dfs_cac_workqueue) {
+		flush_workqueue(priv->dfs_cac_workqueue);
+		destroy_workqueue(priv->dfs_cac_workqueue);
+		priv->dfs_cac_workqueue = NULL;
+	}
+
 	/* Clear the priv in adapter */
 	priv->netdev->ieee80211_ptr = NULL;
 	priv->netdev = NULL;
@@ -3088,6 +3116,36 @@ mwifiex_cfg80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 }
 
 static int
+mwifiex_cfg80211_start_radar_detection(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       struct cfg80211_chan_def *chandef,
+				       u32 cac_time_ms)
+{
+	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+	struct mwifiex_radar_params radar_params;
+
+	if (priv->adapter->scan_processing) {
+		dev_err(priv->adapter->dev,
+			"radar detection: scan already in process...\n");
+		return -EBUSY;
+	}
+
+	memset(&radar_params, 0, sizeof(struct mwifiex_radar_params));
+	radar_params.chandef = chandef;
+	radar_params.cac_time_ms = cac_time_ms;
+
+	memcpy(&priv->dfs_chandef, chandef, sizeof(priv->dfs_chandef));
+
+	if (mwifiex_send_cmd(priv, HostCmd_CMD_CHAN_REPORT_REQUEST,
+			     HostCmd_ACT_GEN_SET, 0, &radar_params, true))
+		return -1;
+
+	queue_delayed_work(priv->dfs_cac_workqueue, &priv->dfs_cac_work,
+			   msecs_to_jiffies(cac_time_ms));
+	return 0;
+}
+
+static int
 mwifiex_cfg80211_change_station(struct wiphy *wiphy, struct net_device *dev,
 				const u8 *mac,
 				struct station_parameters *params)
@@ -3151,6 +3209,7 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.tdls_oper = mwifiex_cfg80211_tdls_oper,
 	.add_station = mwifiex_cfg80211_add_station,
 	.change_station = mwifiex_cfg80211_change_station,
+	.start_radar_detection = mwifiex_cfg80211_start_radar_detection,
 };
 
 #ifdef CONFIG_PM
diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h
index 4481ac4..68aed4e 100644
--- a/drivers/net/wireless/mwifiex/decl.h
+++ b/drivers/net/wireless/mwifiex/decl.h
@@ -108,6 +108,8 @@
 #define MWIFIEX_MAX_UAP_NUM		1
 #define MWIFIEX_MAX_P2P_NUM		1
 
+#define MWIFIEX_A_BAND_START_FREQ	5000
+
 enum mwifiex_bss_type {
 	MWIFIEX_BSS_TYPE_STA = 0,
 	MWIFIEX_BSS_TYPE_UAP = 1,
@@ -242,4 +244,8 @@ struct mwifiex_iface_comb {
 	u8 p2p_intf;
 };
 
+struct mwifiex_radar_params {
+	struct cfg80211_chan_def *chandef;
+	u32 cac_time_ms;
+} __packed;
 #endif /* !_MWIFIEX_DECL_H_ */
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 15ad776..739151c 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -336,6 +336,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define HostCmd_CMD_11N_ADDBA_RSP                     0x00cf
 #define HostCmd_CMD_11N_DELBA                         0x00d0
 #define HostCmd_CMD_RECONFIGURE_TX_BUFF               0x00d9
+#define HostCmd_CMD_CHAN_REPORT_REQUEST               0x00dd
 #define HostCmd_CMD_AMSDU_AGGR_CTRL                   0x00df
 #define HostCmd_CMD_TXPWR_CFG                         0x00d1
 #define HostCmd_CMD_TX_RATE_CFG                       0x00d6
@@ -1216,6 +1217,17 @@ struct host_cmd_ds_tdls_oper {
 	u8 peer_mac[ETH_ALEN];
 } __packed;
 
+struct mwifiex_chan_desc {
+	__le16 start_freq;
+	u8 chan_width;
+	u8 chan_num;
+} __packed;
+
+struct host_cmd_ds_chan_rpt_req {
+	struct mwifiex_chan_desc chan_desc;
+	__le32 msec_dwell_time;
+} __packed;
+
 struct mwifiex_fixed_bcn_param {
 	__le64 timestamp;
 	__le16 beacon_period;
@@ -1904,6 +1916,7 @@ struct host_cmd_ds_command {
 		struct host_cmd_11ac_vht_cfg vht_cfg;
 		struct host_cmd_ds_coalesce_cfg coalesce_cfg;
 		struct host_cmd_ds_tdls_oper tdls_oper;
+		struct host_cmd_ds_chan_rpt_req chan_rpt_req;
 	} params;
 } __packed;
 
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index 1d1c3c8..aa239a8 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -681,6 +681,7 @@ mwifiex_shutdown_drv(struct mwifiex_adapter *adapter)
 			priv = adapter->priv[i];
 
 			mwifiex_clean_auto_tdls(priv);
+			mwifiex_abort_cac(priv);
 			mwifiex_clean_txrx(priv);
 			mwifiex_delete_bss_prio_tbl(priv);
 		}
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index c5ac20d..e266d99 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -588,6 +588,9 @@ struct mwifiex_private {
 	spinlock_t ack_status_lock;
 	/** rx histogram data */
 	struct mwifiex_histogram_data *hist_data;
+	struct cfg80211_chan_def dfs_chandef;
+	struct workqueue_struct *dfs_cac_workqueue;
+	struct delayed_work dfs_cac_work;
 };
 
 enum mwifiex_ba_status {
@@ -754,6 +757,8 @@ struct mwifiex_adapter {
 	struct work_struct main_work;
 	struct workqueue_struct *rx_workqueue;
 	struct work_struct rx_work;
+	struct workqueue_struct *dfs_workqueue;
+	struct work_struct dfs_work;
 	bool rx_work_enabled;
 	bool rx_processing;
 	bool delay_main_work;
@@ -1376,6 +1381,9 @@ void mwifiex_check_auto_tdls(unsigned long context);
 void mwifiex_add_auto_tdls_peer(struct mwifiex_private *priv, const u8 *mac);
 void mwifiex_setup_auto_tdls_timer(struct mwifiex_private *priv);
 void mwifiex_clean_auto_tdls(struct mwifiex_private *priv);
+int mwifiex_cmd_issue_chan_report_request(struct mwifiex_private *priv,
+					  struct host_cmd_ds_command *cmd,
+					  void *data_buf);
 
 void mwifiex_parse_tx_status_event(struct mwifiex_private *priv,
 				   void *event_body);
@@ -1383,6 +1391,8 @@ void mwifiex_parse_tx_status_event(struct mwifiex_private *priv,
 struct sk_buff *
 mwifiex_clone_skb_for_tx_status(struct mwifiex_private *priv,
 				struct sk_buff *skb, u8 flag, u64 *cookie);
+void mwifiex_dfs_cac_work_queue(struct work_struct *work);
+void mwifiex_abort_cac(struct mwifiex_private *priv);
 
 void mwifiex_hist_data_set(struct mwifiex_private *priv, u8 rx_rate, s8 snr,
 			   s8 nflr);
diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c
index 92a66e8..f7d204f 100644
--- a/drivers/net/wireless/mwifiex/sta_cmd.c
+++ b/drivers/net/wireless/mwifiex/sta_cmd.c
@@ -1897,6 +1897,10 @@ int mwifiex_sta_prepare_cmd(struct mwifiex_private *priv, uint16_t cmd_no,
 	case HostCmd_CMD_TDLS_OPER:
 		ret = mwifiex_cmd_tdls_oper(priv, cmd_ptr, data_buf);
 		break;
+	case HostCmd_CMD_CHAN_REPORT_REQUEST:
+		ret = mwifiex_cmd_issue_chan_report_request(priv, cmd_ptr,
+							    data_buf);
+		break;
 	default:
 		dev_err(priv->adapter->dev,
 			"PREP_CMD: unknown cmd- %#x\n", cmd_no);
diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 65d10a3..39f3176 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -1119,6 +1119,8 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
 	case HostCmd_CMD_TDLS_OPER:
 		ret = mwifiex_ret_tdls_oper(priv, resp);
 		break;
+	case HostCmd_CMD_CHAN_REPORT_REQUEST:
+		break;
 	default:
 		dev_err(adapter->dev, "CMD_RESP: unknown cmd response %#x\n",
 			resp->command);
diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c
index baf5314..f5c2af0 100644
--- a/drivers/net/wireless/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/mwifiex/uap_cmd.c
@@ -761,6 +761,11 @@ int mwifiex_uap_prepare_cmd(struct mwifiex_private *priv, u16 cmd_no,
 		if (mwifiex_cmd_uap_sta_deauth(priv, cmd, data_buf))
 			return -1;
 		break;
+	case HostCmd_CMD_CHAN_REPORT_REQUEST:
+		if (mwifiex_cmd_issue_chan_report_request(priv, cmd_buf,
+							  data_buf))
+			return -1;
+		break;
 	default:
 		dev_err(priv->adapter->dev,
 			"PREP_CMD: unknown cmd %#x\n", cmd_no);
-- 
cgit v1.1


From 0a694d68651b16b307d5ad64acac90d604146bcc Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:22 +0530
Subject: mwifiex: support for channel report for radar detection

This patch adds support for channel report enabling.
Channel report event happens if radar is detected on specified channel
after driver has issued radar detect command within CAC time.
Driver in turn sends RADAR_DETECTED event to cfg80211 to tell radar was
detected within CAC time.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/11h.c       | 51 ++++++++++++++++++++++++++++++++
 drivers/net/wireless/mwifiex/fw.h        | 23 ++++++++++++++
 drivers/net/wireless/mwifiex/main.h      |  2 ++
 drivers/net/wireless/mwifiex/sta_event.c |  5 ++++
 drivers/net/wireless/mwifiex/uap_event.c |  4 +++
 5 files changed, 85 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/11h.c b/drivers/net/wireless/mwifiex/11h.c
index 8832c83..e44cac7 100644
--- a/drivers/net/wireless/mwifiex/11h.c
+++ b/drivers/net/wireless/mwifiex/11h.c
@@ -165,3 +165,54 @@ void mwifiex_abort_cac(struct mwifiex_private *priv)
 				   NL80211_RADAR_CAC_ABORTED, GFP_KERNEL);
 	}
 }
+
+/* This function handles channel report event from FW during CAC period.
+ * If radar is detected during CAC, driver indicates the same to cfg80211
+ * and also cancels ongoing delayed work.
+ */
+int mwifiex_11h_handle_chanrpt_ready(struct mwifiex_private *priv,
+				     struct sk_buff *skb)
+{
+	struct host_cmd_ds_chan_rpt_event *rpt_event;
+	struct mwifiex_ie_types_chan_rpt_data *rpt;
+	u8 *evt_buf;
+	u16 event_len, tlv_len;
+
+	rpt_event = (void *)(skb->data + sizeof(u32));
+	event_len = skb->len - (sizeof(struct host_cmd_ds_chan_rpt_event)+
+				sizeof(u32));
+
+	if (le32_to_cpu(rpt_event->result) != HostCmd_RESULT_OK) {
+		dev_err(priv->adapter->dev, "Error in channel report event\n");
+		return -1;
+	}
+
+	evt_buf = (void *)&rpt_event->tlvbuf;
+
+	while (event_len >= sizeof(struct mwifiex_ie_types_header)) {
+		rpt = (void *)&rpt_event->tlvbuf;
+		tlv_len = le16_to_cpu(rpt->header.len);
+
+		switch (le16_to_cpu(rpt->header.type)) {
+		case TLV_TYPE_CHANRPT_11H_BASIC:
+			if (rpt->map.radar) {
+				dev_notice(priv->adapter->dev,
+					   "RADAR Detected on channel %d!\n",
+					    priv->dfs_chandef.chan->hw_value);
+				cancel_delayed_work_sync(&priv->dfs_cac_work);
+				cfg80211_cac_event(priv->netdev,
+						   &priv->dfs_chandef,
+						   NL80211_RADAR_DETECTED,
+						   GFP_KERNEL);
+			}
+			break;
+		default:
+			break;
+		}
+
+		evt_buf += (tlv_len + sizeof(rpt->header));
+		event_len -= (tlv_len + sizeof(rpt->header));
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 739151c..324ef29 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -158,6 +158,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER {
 #define TLV_TYPE_POWER_GROUP        (PROPRIETARY_TLV_BASE_ID + 84)
 #define TLV_TYPE_BSS_SCAN_RSP       (PROPRIETARY_TLV_BASE_ID + 86)
 #define TLV_TYPE_BSS_SCAN_INFO      (PROPRIETARY_TLV_BASE_ID + 87)
+#define TLV_TYPE_CHANRPT_11H_BASIC  (PROPRIETARY_TLV_BASE_ID + 91)
 #define TLV_TYPE_UAP_RETRY_LIMIT    (PROPRIETARY_TLV_BASE_ID + 93)
 #define TLV_TYPE_WAPI_IE            (PROPRIETARY_TLV_BASE_ID + 94)
 #define TLV_TYPE_UAP_MGMT_FRAME     (PROPRIETARY_TLV_BASE_ID + 104)
@@ -494,6 +495,7 @@ enum P2P_MODES {
 #define EVENT_HOSTWAKE_STAIE		0x0000004d
 #define EVENT_CHANNEL_SWITCH_ANN        0x00000050
 #define EVENT_TDLS_GENERIC_EVENT        0x00000052
+#define EVENT_CHANNEL_REPORT_RDY        0x00000054
 #define EVENT_EXT_SCAN_REPORT           0x00000058
 #define EVENT_REMAIN_ON_CHAN_EXPIRED    0x0000005f
 #define EVENT_TX_STATUS_REPORT		0x00000074
@@ -1228,6 +1230,13 @@ struct host_cmd_ds_chan_rpt_req {
 	__le32 msec_dwell_time;
 } __packed;
 
+struct host_cmd_ds_chan_rpt_event {
+	__le32 result;
+	__le64 start_tsf;
+	__le32 duration;
+	u8 tlvbuf[0];
+} __packed;
+
 struct mwifiex_fixed_bcn_param {
 	__le64 timestamp;
 	__le16 beacon_period;
@@ -1804,6 +1813,20 @@ struct mwifiex_ie_types_rssi_threshold {
 	u8 evt_freq;
 } __packed;
 
+struct meas_rpt_map {
+	u8 rssi:3;
+	u8 unmeasured:1;
+	u8 radar:1;
+	u8 unidentified_sig:1;
+	u8 ofdm_preamble:1;
+	u8 bss:1;
+} __packed;
+
+struct mwifiex_ie_types_chan_rpt_data {
+	struct mwifiex_ie_types_header header;
+	struct meas_rpt_map map;
+} __packed;
+
 struct host_cmd_ds_802_11_subsc_evt {
 	__le16 action;
 	__le16 events;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index e266d99..281a30a 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1384,6 +1384,8 @@ void mwifiex_clean_auto_tdls(struct mwifiex_private *priv);
 int mwifiex_cmd_issue_chan_report_request(struct mwifiex_private *priv,
 					  struct host_cmd_ds_command *cmd,
 					  void *data_buf);
+int mwifiex_11h_handle_chanrpt_ready(struct mwifiex_private *priv,
+				     struct sk_buff *skb);
 
 void mwifiex_parse_tx_status_event(struct mwifiex_private *priv,
 				   void *event_body);
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index c37e8cb..ad5c5e0 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -516,6 +516,11 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 		mwifiex_parse_tx_status_event(priv, adapter->event_body);
 		break;
 
+	case EVENT_CHANNEL_REPORT_RDY:
+		dev_dbg(adapter->dev, "event: Channel Report\n");
+		ret = mwifiex_11h_handle_chanrpt_ready(priv,
+						       adapter->event_skb);
+		break;
 	default:
 		dev_dbg(adapter->dev, "event: unknown event id: %#x\n",
 			eventcause);
diff --git a/drivers/net/wireless/mwifiex/uap_event.c b/drivers/net/wireless/mwifiex/uap_event.c
index 9b4ca6f..e0bdf6a 100644
--- a/drivers/net/wireless/mwifiex/uap_event.c
+++ b/drivers/net/wireless/mwifiex/uap_event.c
@@ -215,7 +215,11 @@ int mwifiex_process_uap_event(struct mwifiex_private *priv)
 		adapter->ps_state = PS_STATE_AWAKE;
 		adapter->pm_wakeup_card_req = false;
 		adapter->pm_wakeup_fw_try = false;
+		break;
 
+	case EVENT_CHANNEL_REPORT_RDY:
+		dev_dbg(adapter->dev, "event: Channel Report\n");
+		mwifiex_11h_handle_chanrpt_ready(priv, adapter->event_skb);
 		break;
 	default:
 		dev_dbg(adapter->dev, "event: unknown event id: %#x\n",
-- 
cgit v1.1


From 3b57c1a713a9dd3b8da74b6df9f16ce1f8f9144b Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:23 +0530
Subject: mwifiex: handle radar detect event from FW

This patch adds support for radar_detected event from FW.
Driver in turn would stop netdev queues to stop TX traffic and
issue RADAR_DETECT event to cfg80211.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/11h.c       | 24 ++++++++++++++++++++++++
 drivers/net/wireless/mwifiex/fw.h        | 20 ++++++++++++++++++++
 drivers/net/wireless/mwifiex/main.h      |  2 ++
 drivers/net/wireless/mwifiex/sta_event.c |  5 +++++
 drivers/net/wireless/mwifiex/uap_event.c |  4 ++++
 5 files changed, 55 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/11h.c b/drivers/net/wireless/mwifiex/11h.c
index e44cac7..08c12ae 100644
--- a/drivers/net/wireless/mwifiex/11h.c
+++ b/drivers/net/wireless/mwifiex/11h.c
@@ -216,3 +216,27 @@ int mwifiex_11h_handle_chanrpt_ready(struct mwifiex_private *priv,
 
 	return 0;
 }
+
+/* Handler for radar detected event from FW.*/
+int mwifiex_11h_handle_radar_detected(struct mwifiex_private *priv,
+				      struct sk_buff *skb)
+{
+	struct mwifiex_radar_det_event *rdr_event;
+
+	rdr_event = (void *)(skb->data + sizeof(u32));
+
+	if (le32_to_cpu(rdr_event->passed)) {
+		dev_notice(priv->adapter->dev,
+			   "radar detected; indicating kernel\n");
+		cfg80211_radar_event(priv->adapter->wiphy, &priv->dfs_chandef,
+				     GFP_KERNEL);
+		dev_dbg(priv->adapter->dev, "regdomain: %d\n",
+			rdr_event->reg_domain);
+		dev_dbg(priv->adapter->dev, "radar detection type: %d\n",
+			rdr_event->det_type);
+	} else {
+		dev_dbg(priv->adapter->dev, "false radar detection event!\n");
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 324ef29..6d433227 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -495,6 +495,7 @@ enum P2P_MODES {
 #define EVENT_HOSTWAKE_STAIE		0x0000004d
 #define EVENT_CHANNEL_SWITCH_ANN        0x00000050
 #define EVENT_TDLS_GENERIC_EVENT        0x00000052
+#define EVENT_RADAR_DETECTED		0x00000053
 #define EVENT_CHANNEL_REPORT_RDY        0x00000054
 #define EVENT_EXT_SCAN_REPORT           0x00000058
 #define EVENT_REMAIN_ON_CHAN_EXPIRED    0x0000005f
@@ -1813,6 +1814,25 @@ struct mwifiex_ie_types_rssi_threshold {
 	u8 evt_freq;
 } __packed;
 
+#define MWIFIEX_DFS_REC_HDR_LEN		8
+#define MWIFIEX_DFS_REC_HDR_NUM		10
+#define MWIFIEX_BIN_COUNTER_LEN		7
+
+struct mwifiex_radar_det_event {
+	__le32 detect_count;
+	u8 reg_domain;  /*1=fcc, 2=etsi, 3=mic*/
+	u8 det_type;  /*0=none, 1=pw(chirp), 2=pri(radar)*/
+	__le16 pw_chirp_type;
+	u8 pw_chirp_idx;
+	u8 pw_value;
+	u8 pri_radar_type;
+	u8 pri_bincnt;
+	u8 bin_counter[MWIFIEX_BIN_COUNTER_LEN];
+	u8 num_dfs_records;
+	u8 dfs_record_hdr[MWIFIEX_DFS_REC_HDR_NUM][MWIFIEX_DFS_REC_HDR_LEN];
+	__le32 passed;
+} __packed;
+
 struct meas_rpt_map {
 	u8 rssi:3;
 	u8 unmeasured:1;
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 281a30a..ad9d679 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -1395,6 +1395,8 @@ mwifiex_clone_skb_for_tx_status(struct mwifiex_private *priv,
 				struct sk_buff *skb, u8 flag, u64 *cookie);
 void mwifiex_dfs_cac_work_queue(struct work_struct *work);
 void mwifiex_abort_cac(struct mwifiex_private *priv);
+int mwifiex_11h_handle_radar_detected(struct mwifiex_private *priv,
+				      struct sk_buff *skb);
 
 void mwifiex_hist_data_set(struct mwifiex_private *priv, u8 rx_rate, s8 snr,
 			   s8 nflr);
diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index ad5c5e0..c03b82c 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -521,6 +521,11 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 		ret = mwifiex_11h_handle_chanrpt_ready(priv,
 						       adapter->event_skb);
 		break;
+	case EVENT_RADAR_DETECTED:
+		dev_dbg(adapter->dev, "event: Radar detected\n");
+		ret = mwifiex_11h_handle_radar_detected(priv,
+							adapter->event_skb);
+		break;
 	default:
 		dev_dbg(adapter->dev, "event: unknown event id: %#x\n",
 			eventcause);
diff --git a/drivers/net/wireless/mwifiex/uap_event.c b/drivers/net/wireless/mwifiex/uap_event.c
index e0bdf6a..f4794cd 100644
--- a/drivers/net/wireless/mwifiex/uap_event.c
+++ b/drivers/net/wireless/mwifiex/uap_event.c
@@ -221,6 +221,10 @@ int mwifiex_process_uap_event(struct mwifiex_private *priv)
 		dev_dbg(adapter->dev, "event: Channel Report\n");
 		mwifiex_11h_handle_chanrpt_ready(priv, adapter->event_skb);
 		break;
+	case EVENT_RADAR_DETECTED:
+		dev_dbg(adapter->dev, "event: Radar detected\n");
+		mwifiex_11h_handle_radar_detected(priv, adapter->event_skb);
+		break;
 	default:
 		dev_dbg(adapter->dev, "event: unknown event id: %#x\n",
 			eventcause);
-- 
cgit v1.1


From 7d652034d1a08bd240c98727bbd55901a174c245 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:24 +0530
Subject: mwifiex: channel switch support for mwifiex

This patch adds cfg80211 channel_switch support for mwifiex.
Upon receiving channel switch request, driver would parse channel
switch announcement IE from beacon_data.
If TX is blocked, netdev queues are stopped. IEs from csa_beacon
are then parsed and set to FW.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/11h.c      | 37 ++++++++++++++
 drivers/net/wireless/mwifiex/cfg80211.c | 85 ++++++++++++++++++++++++++++++++-
 drivers/net/wireless/mwifiex/ie.c       | 12 ++++-
 drivers/net/wireless/mwifiex/main.h     |  5 ++
 4 files changed, 136 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/11h.c b/drivers/net/wireless/mwifiex/11h.c
index 08c12ae..d794686 100644
--- a/drivers/net/wireless/mwifiex/11h.c
+++ b/drivers/net/wireless/mwifiex/11h.c
@@ -240,3 +240,40 @@ int mwifiex_11h_handle_radar_detected(struct mwifiex_private *priv,
 
 	return 0;
 }
+
+/* This is work queue function for channel switch handling.
+ * This function takes care of updating new channel definitin to
+ * bss config structure, restart AP and indicate channel switch success
+ * to cfg80211.
+ */
+void mwifiex_dfs_chan_sw_work_queue(struct work_struct *work)
+{
+	struct mwifiex_uap_bss_param *bss_cfg;
+	struct delayed_work *delayed_work =
+			container_of(work, struct delayed_work, work);
+	struct mwifiex_private *priv =
+			container_of(delayed_work, struct mwifiex_private,
+				     dfs_chan_sw_work);
+
+	if (WARN_ON(!priv))
+		return;
+
+	bss_cfg = &priv->bss_cfg;
+	if (!bss_cfg->beacon_period) {
+		dev_err(priv->adapter->dev,
+			"channel switch: AP already stopped\n");
+		return;
+	}
+
+	mwifiex_uap_set_channel(bss_cfg, priv->dfs_chandef);
+
+	if (mwifiex_config_start_uap(priv, bss_cfg)) {
+		dev_dbg(priv->adapter->dev,
+			"Failed to start AP after channel switch\n");
+		return;
+	}
+
+	dev_notice(priv->adapter->dev,
+		   "indicating channel switch completion to kernel\n");
+	cfg80211_ch_switch_notify(priv->netdev, &priv->dfs_chandef);
+}
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 7a969fd..2d1ea93 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -2399,7 +2399,7 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 	struct mwifiex_private *priv;
 	struct net_device *dev;
 	void *mdev_priv;
-	char dfs_cac_str[MWIFIEX_MAX_WQ_LEN];
+	char dfs_cac_str[MWIFIEX_MAX_WQ_LEN], dfs_chsw_str[MWIFIEX_MAX_WQ_LEN];
 
 	if (!adapter)
 		return ERR_PTR(-EFAULT);
@@ -2582,6 +2582,24 @@ struct wireless_dev *mwifiex_add_virtual_intf(struct wiphy *wiphy,
 
 	INIT_DELAYED_WORK(&priv->dfs_cac_work, mwifiex_dfs_cac_work_queue);
 
+	strcpy(dfs_chsw_str, "MWIFIEX_DFS_CHSW");
+	strcat(dfs_chsw_str, name);
+	priv->dfs_chan_sw_workqueue = alloc_workqueue(dfs_chsw_str,
+						      WQ_HIGHPRI | WQ_UNBOUND |
+						      WQ_MEM_RECLAIM, 1);
+	if (!priv->dfs_chan_sw_workqueue) {
+		wiphy_err(wiphy, "cannot register virtual network device\n");
+		free_netdev(dev);
+		priv->bss_mode = NL80211_IFTYPE_UNSPECIFIED;
+		priv->netdev = NULL;
+		memset(&priv->wdev, 0, sizeof(priv->wdev));
+		priv->wdev.iftype = NL80211_IFTYPE_UNSPECIFIED;
+		return ERR_PTR(-ENOMEM);
+	}
+
+	INIT_DELAYED_WORK(&priv->dfs_chan_sw_work,
+			  mwifiex_dfs_chan_sw_work_queue);
+
 	sema_init(&priv->async_sem, 1);
 
 	dev_dbg(adapter->dev, "info: %s: Marvell 802.11 Adapter\n", dev->name);
@@ -2637,6 +2655,11 @@ int mwifiex_del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev)
 		priv->dfs_cac_workqueue = NULL;
 	}
 
+	if (priv->dfs_chan_sw_workqueue) {
+		flush_workqueue(priv->dfs_chan_sw_workqueue);
+		destroy_workqueue(priv->dfs_chan_sw_workqueue);
+		priv->dfs_chan_sw_workqueue = NULL;
+	}
 	/* Clear the priv in adapter */
 	priv->netdev->ieee80211_ptr = NULL;
 	priv->netdev = NULL;
@@ -3116,6 +3139,62 @@ mwifiex_cfg80211_add_station(struct wiphy *wiphy, struct net_device *dev,
 }
 
 static int
+mwifiex_cfg80211_channel_switch(struct wiphy *wiphy, struct net_device *dev,
+				struct cfg80211_csa_settings *params)
+{
+	struct ieee_types_header *chsw_ie;
+	struct ieee80211_channel_sw_ie *channel_sw;
+	int chsw_msec;
+	struct mwifiex_private *priv = mwifiex_netdev_get_priv(dev);
+
+	if (priv->adapter->scan_processing) {
+		dev_err(priv->adapter->dev,
+			"radar detection: scan in process...\n");
+		return -EBUSY;
+	}
+
+	if (priv->wdev.cac_started)
+		return -EBUSY;
+
+	if (cfg80211_chandef_identical(&params->chandef,
+				       &priv->dfs_chandef))
+		return -EINVAL;
+
+	chsw_ie = (void *)cfg80211_find_ie(WLAN_EID_CHANNEL_SWITCH,
+					   params->beacon_csa.tail,
+					   params->beacon_csa.tail_len);
+	if (!chsw_ie) {
+		dev_err(priv->adapter->dev,
+			"Could not parse channel switch announcement IE\n");
+		return -EINVAL;
+	}
+
+	channel_sw = (void *)(chsw_ie + 1);
+	if (channel_sw->mode) {
+		if (netif_carrier_ok(priv->netdev))
+			netif_carrier_off(priv->netdev);
+		mwifiex_stop_net_dev_queue(priv->netdev, priv->adapter);
+	}
+
+	if (mwifiex_del_mgmt_ies(priv))
+		wiphy_err(wiphy, "Failed to delete mgmt IEs!\n");
+
+	if (mwifiex_set_mgmt_ies(priv, &params->beacon_csa)) {
+		wiphy_err(wiphy, "%s: setting mgmt ies failed\n", __func__);
+		return -EFAULT;
+	}
+
+	memcpy(&priv->dfs_chandef, &params->chandef, sizeof(priv->dfs_chandef));
+	memcpy(&priv->beacon_after, &params->beacon_after,
+	       sizeof(priv->beacon_after));
+
+	chsw_msec = max(channel_sw->count * priv->bss_cfg.beacon_period, 100);
+	queue_delayed_work(priv->dfs_chan_sw_workqueue, &priv->dfs_chan_sw_work,
+			   msecs_to_jiffies(chsw_msec));
+	return 0;
+}
+
+static int
 mwifiex_cfg80211_start_radar_detection(struct wiphy *wiphy,
 				       struct net_device *dev,
 				       struct cfg80211_chan_def *chandef,
@@ -3210,6 +3289,7 @@ static struct cfg80211_ops mwifiex_cfg80211_ops = {
 	.add_station = mwifiex_cfg80211_add_station,
 	.change_station = mwifiex_cfg80211_change_station,
 	.start_radar_detection = mwifiex_cfg80211_start_radar_detection,
+	.channel_switch = mwifiex_cfg80211_channel_switch,
 };
 
 #ifdef CONFIG_PM
@@ -3313,7 +3393,8 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter)
 	wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
 			WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD |
 			WIPHY_FLAG_AP_UAPSD |
-			WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
+			WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
+			WIPHY_FLAG_HAS_CHANNEL_SWITCH;
 
 	if (ISSUPP_TDLS_ENABLED(adapter->fw_cap_info))
 		wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS |
diff --git a/drivers/net/wireless/mwifiex/ie.c b/drivers/net/wireless/mwifiex/ie.c
index a6af7b8..f3b6ed2 100644
--- a/drivers/net/wireless/mwifiex/ie.c
+++ b/drivers/net/wireless/mwifiex/ie.c
@@ -325,6 +325,7 @@ static int mwifiex_uap_set_head_tail_ies(struct mwifiex_private *priv,
 {
 	struct mwifiex_ie *gen_ie;
 	struct ieee_types_header *rsn_ie = NULL, *wpa_ie = NULL;
+	struct ieee_types_header *chsw_ie = NULL;
 	u16 gen_idx = MWIFIEX_AUTO_IDX_MASK, ie_len = 0;
 	const u8 *vendor_ie;
 
@@ -356,9 +357,18 @@ static int mwifiex_uap_set_head_tail_ies(struct mwifiex_private *priv,
 			ie_len += wpa_ie->len + 2;
 			gen_ie->ie_length = cpu_to_le16(ie_len);
 		}
+
+		chsw_ie = (void *)cfg80211_find_ie(WLAN_EID_CHANNEL_SWITCH,
+						   info->tail, info->tail_len);
+		if (chsw_ie) {
+			memcpy(gen_ie->ie_buffer + ie_len,
+			       chsw_ie, chsw_ie->len + 2);
+			ie_len += chsw_ie->len + 2;
+			gen_ie->ie_length = cpu_to_le16(ie_len);
+		}
 	}
 
-	if (rsn_ie || wpa_ie) {
+	if (rsn_ie || wpa_ie || chsw_ie) {
 		if (mwifiex_update_uap_custom_ie(priv, gen_ie, &gen_idx, NULL,
 						 NULL, NULL, NULL)) {
 			kfree(gen_ie);
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index ad9d679..599698c 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -591,6 +591,10 @@ struct mwifiex_private {
 	struct cfg80211_chan_def dfs_chandef;
 	struct workqueue_struct *dfs_cac_workqueue;
 	struct delayed_work dfs_cac_work;
+	struct timer_list dfs_chan_switch_timer;
+	struct workqueue_struct *dfs_chan_sw_workqueue;
+	struct delayed_work dfs_chan_sw_work;
+	struct cfg80211_beacon_data beacon_after;
 };
 
 enum mwifiex_ba_status {
@@ -1394,6 +1398,7 @@ struct sk_buff *
 mwifiex_clone_skb_for_tx_status(struct mwifiex_private *priv,
 				struct sk_buff *skb, u8 flag, u64 *cookie);
 void mwifiex_dfs_cac_work_queue(struct work_struct *work);
+void mwifiex_dfs_chan_sw_work_queue(struct work_struct *work);
 void mwifiex_abort_cac(struct mwifiex_private *priv);
 int mwifiex_11h_handle_radar_detected(struct mwifiex_private *priv,
 				      struct sk_buff *skb);
-- 
cgit v1.1


From cf075eac9ca94ec54b5ae0c0ec798839f962be55 Mon Sep 17 00:00:00 2001
From: Avinash Patil <patila@marvell.com>
Date: Wed, 28 Jan 2015 15:54:25 +0530
Subject: mwifiex: 11h handling for AP interface

This patch enables 11h extensions in FW upon detecting DFS
channel in start radar detection/channel switch handlers.
Patch also takes care of disabling 11h when non DFS channels
are to be set during start_ap handler.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Qingshui Gao <gaoqs@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/11h.c      | 18 +++++++++++++++++-
 drivers/net/wireless/mwifiex/cfg80211.c | 22 ++++++++++++++++++++++
 drivers/net/wireless/mwifiex/decl.h     |  5 +++++
 drivers/net/wireless/mwifiex/fw.h       |  2 ++
 drivers/net/wireless/mwifiex/init.c     |  2 ++
 drivers/net/wireless/mwifiex/main.h     |  5 +++++
 6 files changed, 53 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/11h.c b/drivers/net/wireless/mwifiex/11h.c
index d794686..3ab87a8 100644
--- a/drivers/net/wireless/mwifiex/11h.c
+++ b/drivers/net/wireless/mwifiex/11h.c
@@ -21,6 +21,16 @@
 #include "fw.h"
 
 
+void mwifiex_init_11h_params(struct mwifiex_private *priv)
+{
+	priv->state_11h.is_11h_enabled = true;
+	priv->state_11h.is_11h_active = false;
+}
+
+inline int mwifiex_is_11h_active(struct mwifiex_private *priv)
+{
+	return priv->state_11h.is_11h_active;
+}
 /* This function appends 11h info to a buffer while joining an
  * infrastructure BSS
  */
@@ -69,10 +79,14 @@ mwifiex_11h_process_infra_join(struct mwifiex_private *priv, u8 **buffer,
 }
 
 /* Enable or disable the 11h extensions in the firmware */
-static int mwifiex_11h_activate(struct mwifiex_private *priv, bool flag)
+int mwifiex_11h_activate(struct mwifiex_private *priv, bool flag)
 {
 	u32 enable = flag;
 
+	/* enable master mode radar detection on AP interface */
+	if ((GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) && enable)
+		enable |= MWIFIEX_MASTER_RADAR_DET_MASK;
+
 	return mwifiex_send_cmd(priv, HostCmd_CMD_802_11_SNMP_MIB,
 				HostCmd_ACT_GEN_SET, DOT11H_I, &enable, true);
 }
@@ -91,11 +105,13 @@ void mwifiex_11h_process_join(struct mwifiex_private *priv, u8 **buffer,
 		 * bit
 		 */
 		mwifiex_11h_activate(priv, true);
+		priv->state_11h.is_11h_active = true;
 		bss_desc->cap_info_bitmap |= WLAN_CAPABILITY_SPECTRUM_MGMT;
 		mwifiex_11h_process_infra_join(priv, buffer, bss_desc);
 	} else {
 		/* Deactivate 11h functions in the firmware */
 		mwifiex_11h_activate(priv, false);
+		priv->state_11h.is_11h_active = false;
 		bss_desc->cap_info_bitmap &= ~WLAN_CAPABILITY_SPECTRUM_MGMT;
 	}
 }
diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c
index 2d1ea93..41c8e25 100644
--- a/drivers/net/wireless/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/mwifiex/cfg80211.c
@@ -1742,6 +1742,18 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy,
 
 	mwifiex_set_wmm_params(priv, bss_cfg, params);
 
+	if (mwifiex_is_11h_active(priv) &&
+	    !cfg80211_chandef_dfs_required(wiphy, &params->chandef,
+					   priv->bss_mode)) {
+		dev_dbg(priv->adapter->dev, "Disable 11h extensions in FW\n");
+		if (mwifiex_11h_activate(priv, false)) {
+			dev_err(priv->adapter->dev,
+				"Failed to disable 11h extensions!!");
+			return -1;
+		}
+		priv->state_11h.is_11h_active = true;
+	}
+
 	if (mwifiex_config_start_uap(priv, bss_cfg)) {
 		wiphy_err(wiphy, "Failed to start AP\n");
 		kfree(bss_cfg);
@@ -3209,6 +3221,16 @@ mwifiex_cfg80211_start_radar_detection(struct wiphy *wiphy,
 		return -EBUSY;
 	}
 
+	if (!mwifiex_is_11h_active(priv)) {
+		dev_dbg(priv->adapter->dev, "Enable 11h extensions in FW\n");
+		if (mwifiex_11h_activate(priv, true)) {
+			dev_err(priv->adapter->dev,
+				"Failed to activate 11h extensions!!");
+			return -1;
+		}
+		priv->state_11h.is_11h_active = true;
+	}
+
 	memset(&radar_params, 0, sizeof(struct mwifiex_radar_params));
 	radar_params.chandef = chandef;
 	radar_params.cac_time_ms = cac_time_ms;
diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h
index 68aed4e..88d0ead 100644
--- a/drivers/net/wireless/mwifiex/decl.h
+++ b/drivers/net/wireless/mwifiex/decl.h
@@ -248,4 +248,9 @@ struct mwifiex_radar_params {
 	struct cfg80211_chan_def *chandef;
 	u32 cac_time_ms;
 } __packed;
+
+struct mwifiex_11h_intf_state {
+	bool is_11h_enabled;
+	bool is_11h_active;
+} __packed;
 #endif /* !_MWIFIEX_DECL_H_ */
diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h
index 6d433227..df553e8 100644
--- a/drivers/net/wireless/mwifiex/fw.h
+++ b/drivers/net/wireless/mwifiex/fw.h
@@ -534,6 +534,8 @@ enum P2P_MODES {
 
 #define MWIFIEX_FW_V15		   15
 
+#define MWIFIEX_MASTER_RADAR_DET_MASK BIT(1)
+
 struct mwifiex_ie_types_header {
 	__le16 type;
 	__le16 len;
diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c
index aa239a8..b77ba74 100644
--- a/drivers/net/wireless/mwifiex/init.c
+++ b/drivers/net/wireless/mwifiex/init.c
@@ -152,6 +152,8 @@ int mwifiex_init_priv(struct mwifiex_private *priv)
 	priv->check_tdls_tx = false;
 	memcpy(priv->tos_to_tid_inv, tos_to_tid_inv, MAX_NUM_TID);
 
+	mwifiex_init_11h_params(priv);
+
 	return mwifiex_add_bss_prio_tbl(priv);
 }
 
diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h
index 599698c..f0a6af1 100644
--- a/drivers/net/wireless/mwifiex/main.h
+++ b/drivers/net/wireless/mwifiex/main.h
@@ -595,6 +595,7 @@ struct mwifiex_private {
 	struct workqueue_struct *dfs_chan_sw_workqueue;
 	struct delayed_work dfs_chan_sw_work;
 	struct cfg80211_beacon_data beacon_after;
+	struct mwifiex_11h_intf_state state_11h;
 };
 
 enum mwifiex_ba_status {
@@ -1337,6 +1338,10 @@ int mwifiex_config_start_uap(struct mwifiex_private *priv,
 void mwifiex_uap_del_sta_data(struct mwifiex_private *priv,
 			      struct mwifiex_sta_node *node);
 
+void mwifiex_init_11h_params(struct mwifiex_private *priv);
+int mwifiex_is_11h_active(struct mwifiex_private *priv);
+int mwifiex_11h_activate(struct mwifiex_private *priv, bool flag);
+
 void mwifiex_11h_process_join(struct mwifiex_private *priv, u8 **buffer,
 			      struct mwifiex_bssdescriptor *bss_desc);
 int mwifiex_11h_handle_event_chanswann(struct mwifiex_private *priv);
-- 
cgit v1.1


From a75d46a4f405eb19ff780410b968c8092af3fb1d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Michael=20B=C3=BCsch?= <m@bues.ch>
Date: Mon, 26 Jan 2015 18:26:17 +0100
Subject: b43: Fix locking FIXME in beacon update top half

b43 has a FIXME about locking in the mac80211 set-beacon-int callback for a long time.
As it turns out there actually is a tiny race window that could result in
a use-after-free bug of the 'current_beacon' memory.
Nobody ever reported this, so it probably never happened.

Fix this by adding a spin lock that protects the current_beacon access.
We must not be in atomic context while accessing hardware (due to SDIO),
so the beacon update bottom half has to clone the skb and release the lock
before writing it to hardware.

Let's all hope that this stops the troll who is trying to submit incorrect
fixes for this issue repeatedly.
And let's hope that I'm not a troll, too, who just hides even more evil code
in an even more complex attempt to fix the issue.

Signed-off-by: Michael Buesch <m@bues.ch>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/b43/b43.h  |  1 +
 drivers/net/wireless/b43/main.c | 43 ++++++++++++++++++++++++++++++-----------
 2 files changed, 33 insertions(+), 11 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index bb12586..65b2dd8 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -941,6 +941,7 @@ struct b43_wl {
 	bool beacon1_uploaded;
 	bool beacon_templates_virgin; /* Never wrote the templates? */
 	struct work_struct beacon_update_trigger;
+	spinlock_t beacon_lock;
 
 	/* The current QOS parameters for the 4 queues. */
 	struct b43_qos_params qos_params[B43_QOS_QUEUE_NUM];
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 58a2e88..d1c3971 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1601,12 +1601,26 @@ static void b43_write_beacon_template(struct b43_wldev *dev,
 	unsigned int rate;
 	u16 ctl;
 	int antenna;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(dev->wl->current_beacon);
+	struct ieee80211_tx_info *info;
+	unsigned long flags;
+	struct sk_buff *beacon_skb;
 
-	bcn = (const struct ieee80211_mgmt *)(dev->wl->current_beacon->data);
-	len = min_t(size_t, dev->wl->current_beacon->len,
-		  0x200 - sizeof(struct b43_plcp_hdr6));
+	spin_lock_irqsave(&dev->wl->beacon_lock, flags);
+	info = IEEE80211_SKB_CB(dev->wl->current_beacon);
 	rate = ieee80211_get_tx_rate(dev->wl->hw, info)->hw_value;
+	/* Clone the beacon, so it cannot go away, while we write it to hw. */
+	beacon_skb = skb_clone(dev->wl->current_beacon, GFP_ATOMIC);
+	spin_unlock_irqrestore(&dev->wl->beacon_lock, flags);
+
+	if (!beacon_skb) {
+		b43dbg(dev->wl, "Could not upload beacon. "
+		       "Failed to clone beacon skb.");
+		return;
+	}
+
+	bcn = (const struct ieee80211_mgmt *)(beacon_skb->data);
+	len = min_t(size_t, beacon_skb->len,
+		    0x200 - sizeof(struct b43_plcp_hdr6));
 
 	b43_write_template_common(dev, (const u8 *)bcn,
 				  len, ram_offset, shm_size_offset, rate);
@@ -1674,6 +1688,8 @@ static void b43_write_beacon_template(struct b43_wldev *dev,
 				B43_SHM_SH_DTIMPER, 0);
 	}
 	b43dbg(dev->wl, "Updated beacon template at 0x%x\n", ram_offset);
+
+	dev_kfree_skb_any(beacon_skb);
 }
 
 static void b43_upload_beacon0(struct b43_wldev *dev)
@@ -1790,13 +1806,13 @@ static void b43_beacon_update_trigger_work(struct work_struct *work)
 	mutex_unlock(&wl->mutex);
 }
 
-/* Asynchronously update the packet templates in template RAM.
- * Locking: Requires wl->mutex to be locked. */
+/* Asynchronously update the packet templates in template RAM. */
 static void b43_update_templates(struct b43_wl *wl)
 {
-	struct sk_buff *beacon;
+	struct sk_buff *beacon, *old_beacon;
+	unsigned long flags;
 
-	/* This is the top half of the ansynchronous beacon update.
+	/* This is the top half of the asynchronous beacon update.
 	 * The bottom half is the beacon IRQ.
 	 * Beacon update must be asynchronous to avoid sending an
 	 * invalid beacon. This can happen for example, if the firmware
@@ -1810,12 +1826,17 @@ static void b43_update_templates(struct b43_wl *wl)
 	if (unlikely(!beacon))
 		return;
 
-	if (wl->current_beacon)
-		dev_kfree_skb_any(wl->current_beacon);
+	spin_lock_irqsave(&wl->beacon_lock, flags);
+	old_beacon = wl->current_beacon;
 	wl->current_beacon = beacon;
 	wl->beacon0_uploaded = false;
 	wl->beacon1_uploaded = false;
+	spin_unlock_irqrestore(&wl->beacon_lock, flags);
+
 	ieee80211_queue_work(wl->hw, &wl->beacon_update_trigger);
+
+	if (old_beacon)
+		dev_kfree_skb_any(old_beacon);
 }
 
 static void b43_set_beacon_int(struct b43_wldev *dev, u16 beacon_int)
@@ -5095,7 +5116,6 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw,
 {
 	struct b43_wl *wl = hw_to_b43_wl(hw);
 
-	/* FIXME: add locking */
 	b43_update_templates(wl);
 
 	return 0;
@@ -5585,6 +5605,7 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
 	wl->hw = hw;
 	mutex_init(&wl->mutex);
 	spin_lock_init(&wl->hardirq_lock);
+	spin_lock_init(&wl->beacon_lock);
 	INIT_WORK(&wl->beacon_update_trigger, b43_beacon_update_trigger_work);
 	INIT_WORK(&wl->txpower_adjust_work, b43_phy_txpower_adjust_work);
 	INIT_WORK(&wl->tx_work, b43_tx_work);
-- 
cgit v1.1


From 14c5932805eb7b5a04e771d48065b4d2080750b2 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Wed, 28 Jan 2015 17:54:21 +0530
Subject: ath9k: Update QCA953x initvals

This patch disables HW peak detect calibration for
QCA953x, since it is problematic on a few boards.
Instead, manual calibration will be done in the
driver.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar953x_initvals.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
index 159cc6f..6fc0d07 100644
--- a/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar953x_initvals.h
@@ -358,7 +358,7 @@ static const u32 qca953x_1p0_baseband_postamble[][5] = {
 	{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
 	{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
 	{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
-	{0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcfa10822, 0xcfa10822},
+	{0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcfa10820, 0xcfa10820},
 	{0x00009e44, 0xfe321e27, 0xfe321e27, 0xfe291e27, 0xfe291e27},
 	{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
 	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -378,7 +378,7 @@ static const u32 qca953x_1p0_baseband_postamble[][5] = {
 	{0x0000a284, 0x00000000, 0x00000000, 0x00000010, 0x00000010},
 	{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
 	{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
-	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
 	{0x0000a2cc, 0x18c50033, 0x18c43433, 0x18c41033, 0x18c44c33},
 	{0x0000a2d0, 0x00041982, 0x00041982, 0x00041982, 0x00041982},
 	{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
-- 
cgit v1.1


From 4f6f952b9cdd096f38d2a7dc6f560c630c91b627 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Wed, 28 Jan 2015 17:54:22 +0530
Subject: ath9k: Update AR955x initvals

This patch disables HW peak detect calibration for
AR955x, since it is problematic on a few boards.
Instead, manual calibration will be done in the
driver.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h
index fd6a84c..148562a 100644
--- a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h
@@ -63,7 +63,7 @@ static const u32 ar955x_1p0_baseband_postamble[][5] = {
 	{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
 	{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
 	{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
-	{0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcfa10822, 0xcfa10822},
+	{0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcfa10820, 0xcfa10820},
 	{0x00009e44, 0xfe321e27, 0xfe321e27, 0xfe291e27, 0xfe291e27},
 	{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
 	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -83,7 +83,7 @@ static const u32 ar955x_1p0_baseband_postamble[][5] = {
 	{0x0000a284, 0x00000000, 0x00000000, 0x00000010, 0x00000010},
 	{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
 	{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
-	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
 	{0x0000a2cc, 0x18c50033, 0x18c43433, 0x18c41033, 0x18c44c33},
 	{0x0000a2d0, 0x00041982, 0x00041982, 0x00041982, 0x00041982},
 	{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
-- 
cgit v1.1


From f49c90db4d2351f354c4f6902f6718637cd23393 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Wed, 28 Jan 2015 17:54:23 +0530
Subject: ath9k: Add a macro to identify PCOEM chips

This can be used if we need to apply register settings
for all PCOEM solutions (in the AR9003 family).

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/reg.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index eb2bb0d..3c0b180 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -900,10 +900,13 @@
 	(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485))
 #define AR_SREV_9565(_ah) \
 	(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565))
+#define AR_SREV_9003_PCOEM(_ah) \
+	(AR_SREV_9462(_ah) || AR_SREV_9485(_ah) || AR_SREV_9565(_ah))
 #else
 #define AR_SREV_9462(_ah) 0
 #define AR_SREV_9485(_ah) 0
 #define AR_SREV_9565(_ah) 0
+#define AR_SREV_9003_PCOEM(_ah) 0
 #endif
 
 #define AR_SREV_9485_11_OR_LATER(_ah) \
-- 
cgit v1.1


From 7a722ebc596a572a9b24cfe1466642faa6a8988a Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Wed, 28 Jan 2015 17:54:24 +0530
Subject: ath9k: Fix manual peak calibration initialization

The LNA gain setting override needs to be done
only for AR9330 and PCOEM chips.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 38 +++++++++++++++++++++------
 1 file changed, 30 insertions(+), 8 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 06ab71db..374aef1 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1205,22 +1205,34 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
 	int offset[8] = {0}, total = 0, test;
 	int agc_out, i;
 
+	/*
+	 * Turn off LNA/SW.
+	 */
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_GAINSTAGES(chain),
 		      AR_PHY_65NM_RXRF_GAINSTAGES_RX_OVERRIDE, 0x1);
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_GAINSTAGES(chain),
 		      AR_PHY_65NM_RXRF_GAINSTAGES_LNAON_CALDC, 0x0);
-	if (is_2g)
-		REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_GAINSTAGES(chain),
-			      AR_PHY_65NM_RXRF_GAINSTAGES_LNA2G_GAIN_OVR, 0x0);
-	else
-		REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_GAINSTAGES(chain),
-			      AR_PHY_65NM_RXRF_GAINSTAGES_LNA5G_GAIN_OVR, 0x0);
 
+	if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9330_11(ah)) {
+		if (is_2g)
+			REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_GAINSTAGES(chain),
+				      AR_PHY_65NM_RXRF_GAINSTAGES_LNA2G_GAIN_OVR, 0x0);
+		else
+			REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_GAINSTAGES(chain),
+				      AR_PHY_65NM_RXRF_GAINSTAGES_LNA5G_GAIN_OVR, 0x0);
+	}
+
+	/*
+	 * Turn off RXON.
+	 */
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXTX2(chain),
 		      AR_PHY_65NM_RXTX2_RXON_OVR, 0x1);
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXTX2(chain),
 		      AR_PHY_65NM_RXTX2_RXON, 0x0);
 
+	/*
+	 * Turn on AGC for cal.
+	 */
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
 		      AR_PHY_65NM_RXRF_AGC_AGC_OVERRIDE, 0x1);
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
@@ -1228,10 +1240,11 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
 		      AR_PHY_65NM_RXRF_AGC_AGC_CAL_OVR, 0x1);
 
-	if (AR_SREV_9330_11(ah)) {
+	if (AR_SREV_9330_11(ah))
 		REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
 			      AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0);
-	} else {
+
+	if (AR_SREV_9003_PCOEM(ah)) {
 		if (is_2g)
 			REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
 				      AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR, 0x0);
@@ -1266,10 +1279,19 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
 		REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
 			      AR_PHY_65NM_RXRF_AGC_AGC5G_CALDAC_OVR, total);
 
+	/*
+	 * Turn on LNA.
+	 */
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_GAINSTAGES(chain),
 		      AR_PHY_65NM_RXRF_GAINSTAGES_RX_OVERRIDE, 0);
+	/*
+	 * Turn off RXON.
+	 */
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXTX2(chain),
 		      AR_PHY_65NM_RXTX2_RXON_OVR, 0);
+	/*
+	 * Turn off peak detect calibration.
+	 */
 	REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
 		      AR_PHY_65NM_RXRF_AGC_AGC_CAL_OVR, 0);
 }
-- 
cgit v1.1


From e4e292f3c7df753926ecb411788057e15154189e Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Wed, 28 Jan 2015 17:54:25 +0530
Subject: ath9k: Set correct peak detect threshold

The value is different for PCOEM cards and AR955x/AR953x.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 374aef1..91130c0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1203,7 +1203,12 @@ static void ar9003_hw_tx_iq_cal_reload(struct ath_hw *ah)
 static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
 {
 	int offset[8] = {0}, total = 0, test;
-	int agc_out, i;
+	int agc_out, i, peak_detect_threshold;
+
+	if (AR_SREV_9550(ah) || AR_SREV_9531(ah))
+		peak_detect_threshold = 8;
+	else
+		peak_detect_threshold = 0;
 
 	/*
 	 * Turn off LNA/SW.
@@ -1244,13 +1249,15 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g)
 		REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
 			      AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, 0x0);
 
-	if (AR_SREV_9003_PCOEM(ah)) {
+	if (AR_SREV_9003_PCOEM(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
 		if (is_2g)
 			REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
-				      AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR, 0x0);
+				      AR_PHY_65NM_RXRF_AGC_AGC2G_DBDAC_OVR,
+				      peak_detect_threshold);
 		else
 			REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain),
-				      AR_PHY_65NM_RXRF_AGC_AGC5G_DBDAC_OVR, 0x0);
+				      AR_PHY_65NM_RXRF_AGC_AGC5G_DBDAC_OVR,
+				      peak_detect_threshold);
 	}
 
 	for (i = 6; i > 0; i--) {
-- 
cgit v1.1


From cfbed87b304a517af27c22a7caf2cb345cb063f9 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Wed, 28 Jan 2015 17:54:26 +0530
Subject: ath9k: Enable manual peak detect calibration

On some AR955x/QCA953x boards, noise floor calibration
gets stuck and the cause is a hardware/BB issue. To fix
this, peak detect calibration in the HW is disabled
and is done in the driver instead. There a few differences
with the calibration routine for older chips like
AR9331.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 91130c0..174442b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1640,8 +1640,14 @@ static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
 
 skip_tx_iqcal:
 	if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) {
-		if (AR_SREV_9330_11(ah))
-			ar9003_hw_manual_peak_cal(ah, 0, IS_CHAN_2GHZ(chan));
+		if (AR_SREV_9330_11(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
+			for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+				if (!(ah->rxchainmask & (1 << i)))
+					continue;
+				ar9003_hw_manual_peak_cal(ah, i,
+							  IS_CHAN_2GHZ(chan));
+			}
+		}
 
 		/*
 		 * For non-AR9550 chips, we just trigger AGC calibration
-- 
cgit v1.1


From 86144b01a25185ec092b9301e340ca4f7a8c0d92 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Sun, 25 Jan 2015 14:39:34 +0100
Subject: b43: support bcma core reset on AC-PHY hardware
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

AC-PHY hardware includes new control 0x3 bits that need to be set to the
0x1 by default.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/b43/b43.h  |  2 ++
 drivers/net/wireless/b43/main.c | 17 +++++++++++++++++
 2 files changed, 19 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 65b2dd8..0365524 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -500,6 +500,8 @@ enum {
 #define  B43_BCMA_IOCTL_PHY_BW_10MHZ	0x00000000	/* 10 MHz bandwidth, 40 MHz PHY */
 #define  B43_BCMA_IOCTL_PHY_BW_20MHZ	0x00000040	/* 20 MHz bandwidth, 80 MHz PHY */
 #define  B43_BCMA_IOCTL_PHY_BW_40MHZ	0x00000080	/* 40 MHz bandwidth, 160 MHz PHY */
+#define  B43_BCMA_IOCTL_PHY_BW_80MHZ	0x000000C0	/* 80 MHz bandwidth */
+#define B43_BCMA_IOCTL_DAC		0x00000300	/* Highspeed DAC mode control field */
 #define B43_BCMA_IOCTL_GMODE		0x00002000	/* G Mode Enable */
 
 /* BCMA 802.11 core specific IO status (BCMA_IOST) flags */
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index d1c3971..1784933 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1262,6 +1262,23 @@ static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode)
 		flags |= B43_BCMA_IOCTL_GMODE;
 	b43_device_enable(dev, flags);
 
+	if (dev->phy.type == B43_PHYTYPE_AC) {
+		u16 tmp;
+
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~B43_BCMA_IOCTL_DAC;
+		tmp |= 0x100;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp &= ~B43_BCMA_IOCTL_PHY_CLKEN;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+
+		tmp = bcma_aread32(dev->dev->bdev, BCMA_IOCTL);
+		tmp |= B43_BCMA_IOCTL_PHY_CLKEN;
+		bcma_awrite32(dev->dev->bdev, BCMA_IOCTL, tmp);
+	}
+
 	bcma_core_set_clockmode(dev->dev->bdev, BCMA_CLKMODE_FAST);
 	b43_bcma_phy_reset(dev);
 	bcma_core_pll_ctl(dev->dev->bdev, req, status, true);
-- 
cgit v1.1


From 3f7bb3f34cc880bc35f6c278be16cd8afee7c524 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
Date: Sun, 25 Jan 2015 18:01:37 +0100
Subject: b43: AC-PHY: prepare place for developing new PHY support
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

There are new (not anymore?) Broadcom 802.11ac wireless cards based on
chipsets like BCM4352 and BCM4360. They use a new PHY type (called
simply AC) that will require new specific code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/b43/Kconfig      |  9 ++++
 drivers/net/wireless/b43/Makefile     |  1 +
 drivers/net/wireless/b43/main.c       | 10 ++++
 drivers/net/wireless/b43/phy_ac.c     | 92 +++++++++++++++++++++++++++++++++++
 drivers/net/wireless/b43/phy_ac.h     | 38 +++++++++++++++
 drivers/net/wireless/b43/phy_common.c |  9 +++-
 drivers/net/wireless/b43/phy_common.h |  2 +
 7 files changed, 160 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/b43/phy_ac.c
 create mode 100644 drivers/net/wireless/b43/phy_ac.h

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 64a5b67..759fb8d 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -166,6 +166,15 @@ config B43_PHY_LCN
 
 	  Say N, this is BROKEN and crashes driver.
 
+config B43_PHY_AC
+	bool "Support for AC-PHY (802.11ac) devices (BROKEN)"
+	depends on B43 && B43_BCMA && BROKEN
+	---help---
+	  This PHY type can be found in the following chipsets:
+	  PCI: BCM4352, BCM4360
+
+	  Say N, this is BROKEN and crashes driver.
+
 # This config option automatically enables b43 LEDS support,
 # if it's possible.
 config B43_LEDS
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 9f7965a..c624d4d 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -13,6 +13,7 @@ b43-$(CONFIG_B43_PHY_HT)	+= phy_ht.o
 b43-$(CONFIG_B43_PHY_HT)	+= tables_phy_ht.o
 b43-$(CONFIG_B43_PHY_HT)	+= radio_2059.o
 b43-$(CONFIG_B43_PHY_LCN)	+= phy_lcn.o tables_phy_lcn.o
+b43-$(CONFIG_B43_PHY_AC)	+= phy_ac.o
 b43-y				+= sysfs.o
 b43-y				+= xmit.o
 b43-y				+= dma.o
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 1784933..2c90886 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4544,6 +4544,12 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 			unsupported = 1;
 		break;
 #endif
+#ifdef CONFIG_B43_PHY_AC
+	case B43_PHYTYPE_AC:
+		if (phy_rev > 1)
+			unsupported = 1;
+		break;
+#endif
 	default:
 		unsupported = 1;
 	}
@@ -4640,6 +4646,10 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 		if (radio_id != 0x2064)
 			unsupported = 1;
 		break;
+	case B43_PHYTYPE_AC:
+		if (radio_id != 0x2069)
+			unsupported = 1;
+		break;
 	default:
 		B43_WARN_ON(1);
 	}
diff --git a/drivers/net/wireless/b43/phy_ac.c b/drivers/net/wireless/b43/phy_ac.c
new file mode 100644
index 0000000..e75633d
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_ac.c
@@ -0,0 +1,92 @@
+/*
+ * Broadcom B43 wireless driver
+ * IEEE 802.11ac AC-PHY support
+ *
+ * Copyright (c) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include "b43.h"
+#include "phy_ac.h"
+
+/**************************************************
+ * Basic PHY ops
+ **************************************************/
+
+static int b43_phy_ac_op_allocate(struct b43_wldev *dev)
+{
+	struct b43_phy_ac *phy_ac;
+
+	phy_ac = kzalloc(sizeof(*phy_ac), GFP_KERNEL);
+	if (!phy_ac)
+		return -ENOMEM;
+	dev->phy.ac = phy_ac;
+
+	return 0;
+}
+
+static void b43_phy_ac_op_free(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_ac *phy_ac = phy->ac;
+
+	kfree(phy_ac);
+	phy->ac = NULL;
+}
+
+static void b43_phy_ac_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask,
+				  u16 set)
+{
+	b43_write16f(dev, B43_MMIO_PHY_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_PHY_DATA,
+		    (b43_read16(dev, B43_MMIO_PHY_DATA) & mask) | set);
+}
+
+static u16 b43_phy_ac_op_radio_read(struct b43_wldev *dev, u16 reg)
+{
+	b43_write16f(dev, B43_MMIO_RADIO24_CONTROL, reg);
+	return b43_read16(dev, B43_MMIO_RADIO24_DATA);
+}
+
+static void b43_phy_ac_op_radio_write(struct b43_wldev *dev, u16 reg,
+				      u16 value)
+{
+	b43_write16f(dev, B43_MMIO_RADIO24_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_RADIO24_DATA, value);
+}
+
+static unsigned int b43_phy_ac_op_get_default_chan(struct b43_wldev *dev)
+{
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+		return 11;
+	return 36;
+}
+
+static enum b43_txpwr_result
+b43_phy_ac_op_recalc_txpower(struct b43_wldev *dev, bool ignore_tssi)
+{
+	return B43_TXPWR_RES_DONE;
+}
+
+static void b43_phy_ac_op_adjust_txpower(struct b43_wldev *dev)
+{
+}
+
+/**************************************************
+ * PHY ops struct
+ **************************************************/
+
+const struct b43_phy_operations b43_phyops_ac = {
+	.allocate		= b43_phy_ac_op_allocate,
+	.free			= b43_phy_ac_op_free,
+	.phy_maskset		= b43_phy_ac_op_maskset,
+	.radio_read		= b43_phy_ac_op_radio_read,
+	.radio_write		= b43_phy_ac_op_radio_write,
+	.get_default_chan	= b43_phy_ac_op_get_default_chan,
+	.recalc_txpower		= b43_phy_ac_op_recalc_txpower,
+	.adjust_txpower		= b43_phy_ac_op_adjust_txpower,
+};
diff --git a/drivers/net/wireless/b43/phy_ac.h b/drivers/net/wireless/b43/phy_ac.h
new file mode 100644
index 0000000..d1ca79e
--- /dev/null
+++ b/drivers/net/wireless/b43/phy_ac.h
@@ -0,0 +1,38 @@
+#ifndef B43_PHY_AC_H_
+#define B43_PHY_AC_H_
+
+#include "phy_common.h"
+
+#define B43_PHY_AC_BBCFG			0x001
+#define  B43_PHY_AC_BBCFG_RSTCCA		0x4000	/* Reset CCA */
+#define B43_PHY_AC_BANDCTL			0x003	/* Band control */
+#define  B43_PHY_AC_BANDCTL_5GHZ		0x0001
+#define B43_PHY_AC_TABLE_ID			0x00d
+#define B43_PHY_AC_TABLE_OFFSET			0x00e
+#define B43_PHY_AC_TABLE_DATA1			0x00f
+#define B43_PHY_AC_TABLE_DATA2			0x010
+#define B43_PHY_AC_TABLE_DATA3			0x011
+#define B43_PHY_AC_CLASSCTL			0x140	/* Classifier control */
+#define  B43_PHY_AC_CLASSCTL_CCKEN		0x0001	/* CCK enable */
+#define  B43_PHY_AC_CLASSCTL_OFDMEN		0x0002	/* OFDM enable */
+#define  B43_PHY_AC_CLASSCTL_WAITEDEN		0x0004	/* Waited enable */
+#define B43_PHY_AC_BW1A				0x371
+#define B43_PHY_AC_BW2				0x372
+#define B43_PHY_AC_BW3				0x373
+#define B43_PHY_AC_BW4				0x374
+#define B43_PHY_AC_BW5				0x375
+#define B43_PHY_AC_BW6				0x376
+#define B43_PHY_AC_RFCTL_CMD			0x408
+#define B43_PHY_AC_C1_CLIP			0x6d4
+#define  B43_PHY_AC_C1_CLIP_DIS			0x4000
+#define B43_PHY_AC_C2_CLIP			0x8d4
+#define  B43_PHY_AC_C2_CLIP_DIS			0x4000
+#define B43_PHY_AC_C3_CLIP			0xad4
+#define  B43_PHY_AC_C3_CLIP_DIS			0x4000
+
+struct b43_phy_ac {
+};
+
+extern const struct b43_phy_operations b43_phyops_ac;
+
+#endif /* B43_PHY_AC_H_ */
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index ee27b06..ec2b9c5 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -33,6 +33,7 @@
 #include "phy_lp.h"
 #include "phy_ht.h"
 #include "phy_lcn.h"
+#include "phy_ac.h"
 #include "b43.h"
 #include "main.h"
 
@@ -70,6 +71,11 @@ int b43_phy_allocate(struct b43_wldev *dev)
 		phy->ops = &b43_phyops_lcn;
 #endif
 		break;
+	case B43_PHYTYPE_AC:
+#ifdef CONFIG_B43_PHY_AC
+		phy->ops = &b43_phyops_ac;
+#endif
+		break;
 	}
 	if (B43_WARN_ON(!phy->ops))
 		return -ENODEV;
@@ -572,7 +578,8 @@ void b43_phy_force_clock(struct b43_wldev *dev, bool force)
 	u32 tmp;
 
 	WARN_ON(dev->phy.type != B43_PHYTYPE_N &&
-		dev->phy.type != B43_PHYTYPE_HT);
+		dev->phy.type != B43_PHYTYPE_HT &&
+		dev->phy.type != B43_PHYTYPE_AC);
 
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 3912274..78d8652 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -222,6 +222,8 @@ struct b43_phy {
 		struct b43_phy_ht *ht;
 		/* LCN-PHY specific information */
 		struct b43_phy_lcn *lcn;
+		/* AC-PHY specific information */
+		struct b43_phy_ac *ac;
 	};
 
 	/* Band support flags. */
-- 
cgit v1.1


From 5e752e42f6773c8e4d360b35c72dc1ef73240583 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Mon, 19 Jan 2015 09:53:41 +0100
Subject: ath10k: move wmm param storage to vif

mac80211 already requests WMM per vif but firmware
wasn't able to handle this until now. However new
wmi-tlv firmware for qca6174 is capable of this.

This prepares per-vif WMM param setup.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h    |  2 +-
 drivers/net/wireless/ath/ath10k/mac.c     | 11 ++++++-----
 drivers/net/wireless/ath/ath10k/wmi-ops.h |  4 ++--
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 32 +++++++++++++++----------------
 drivers/net/wireless/ath/ath10k/wmi.c     | 14 +++++++-------
 drivers/net/wireless/ath/ath10k/wmi.h     |  6 +++---
 6 files changed, 35 insertions(+), 34 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 2d9f871..abb3203 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -315,6 +315,7 @@ struct ath10k_vif {
 	bool use_cts_prot;
 	int num_legacy_stations;
 	int txpower;
+	struct wmi_wmm_params_all_arg wmm_params;
 };
 
 struct ath10k_vif_iter {
@@ -577,7 +578,6 @@ struct ath10k {
 	u8 cfg_tx_chainmask;
 	u8 cfg_rx_chainmask;
 
-	struct wmi_pdev_set_wmm_params_arg wmm_params;
 	struct completion install_key_done;
 
 	struct completion vdev_setup_done;
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 02e2bfc..62e8adc 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4092,6 +4092,7 @@ static int ath10k_conf_tx(struct ieee80211_hw *hw,
 			  const struct ieee80211_tx_queue_params *params)
 {
 	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	struct wmi_wmm_params_arg *p = NULL;
 	int ret;
 
@@ -4099,16 +4100,16 @@ static int ath10k_conf_tx(struct ieee80211_hw *hw,
 
 	switch (ac) {
 	case IEEE80211_AC_VO:
-		p = &ar->wmm_params.ac_vo;
+		p = &arvif->wmm_params.ac_vo;
 		break;
 	case IEEE80211_AC_VI:
-		p = &ar->wmm_params.ac_vi;
+		p = &arvif->wmm_params.ac_vi;
 		break;
 	case IEEE80211_AC_BE:
-		p = &ar->wmm_params.ac_be;
+		p = &arvif->wmm_params.ac_be;
 		break;
 	case IEEE80211_AC_BK:
-		p = &ar->wmm_params.ac_bk;
+		p = &arvif->wmm_params.ac_bk;
 		break;
 	}
 
@@ -4129,7 +4130,7 @@ static int ath10k_conf_tx(struct ieee80211_hw *hw,
 	p->txop = params->txop * 32;
 
 	/* FIXME: FW accepts wmm params per hw, not per vif */
-	ret = ath10k_wmi_pdev_set_wmm_params(ar, &ar->wmm_params);
+	ret = ath10k_wmi_pdev_set_wmm_params(ar, &arvif->wmm_params);
 	if (ret) {
 		ath10k_warn(ar, "failed to set wmm params: %d\n", ret);
 		goto exit;
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 80bd28a..6e9e384 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -104,7 +104,7 @@ struct wmi_ops {
 					      const struct wmi_scan_chan_list_arg *arg);
 	struct sk_buff *(*gen_beacon_dma)(struct ath10k_vif *arvif);
 	struct sk_buff *(*gen_pdev_set_wmm)(struct ath10k *ar,
-					    const struct wmi_pdev_set_wmm_params_arg *arg);
+					    const struct wmi_wmm_params_all_arg *arg);
 	struct sk_buff *(*gen_request_stats)(struct ath10k *ar,
 					     enum wmi_stats_id stats_id);
 	struct sk_buff *(*gen_force_fw_hang)(struct ath10k *ar,
@@ -774,7 +774,7 @@ ath10k_wmi_beacon_send_ref_nowait(struct ath10k_vif *arvif)
 
 static inline int
 ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar,
-			       const struct wmi_pdev_set_wmm_params_arg *arg)
+			       const struct wmi_wmm_params_all_arg *arg)
 {
 	struct sk_buff *skb;
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index d3cf91dc..23a3761 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1584,6 +1584,21 @@ ath10k_wmi_tlv_op_gen_vdev_sta_uapsd(struct ath10k *ar, u32 vdev_id,
 	return skb;
 }
 
+static void *ath10k_wmi_tlv_put_wmm(void *ptr,
+				    const struct wmi_wmm_params_arg *arg)
+{
+	struct wmi_wmm_params *wmm;
+	struct wmi_tlv *tlv;
+
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_WMM_PARAMS);
+	tlv->len = __cpu_to_le16(sizeof(*wmm));
+	wmm = (void *)tlv->value;
+	ath10k_wmi_set_wmm_param(wmm, arg);
+
+	return ptr + sizeof(*tlv) + sizeof(*wmm);
+}
+
 static struct sk_buff *
 ath10k_wmi_tlv_op_gen_peer_create(struct ath10k *ar, u32 vdev_id,
 				  const u8 peer_addr[ETH_ALEN])
@@ -1944,24 +1959,9 @@ ath10k_wmi_tlv_op_gen_beacon_dma(struct ath10k_vif *arvif)
 	return skb;
 }
 
-static void *ath10k_wmi_tlv_put_wmm(void *ptr,
-				    const struct wmi_wmm_params_arg *arg)
-{
-	struct wmi_wmm_params *wmm;
-	struct wmi_tlv *tlv;
-
-	tlv = ptr;
-	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_WMM_PARAMS);
-	tlv->len = __cpu_to_le16(sizeof(*wmm));
-	wmm = (void *)tlv->value;
-	ath10k_wmi_pdev_set_wmm_param(wmm, arg);
-
-	return ptr + sizeof(*tlv) + sizeof(*wmm);
-}
-
 static struct sk_buff *
 ath10k_wmi_tlv_op_gen_pdev_set_wmm(struct ath10k *ar,
-				   const struct wmi_pdev_set_wmm_params_arg *arg)
+				   const struct wmi_wmm_params_all_arg *arg)
 {
 	struct wmi_tlv_pdev_set_wmm_cmd *cmd;
 	struct wmi_wmm_params *wmm;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index fb1e2d1..050e508 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4890,8 +4890,8 @@ ath10k_wmi_op_gen_beacon_dma(struct ath10k_vif *arvif)
 	return skb;
 }
 
-void ath10k_wmi_pdev_set_wmm_param(struct wmi_wmm_params *params,
-				   const struct wmi_wmm_params_arg *arg)
+void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
+			      const struct wmi_wmm_params_arg *arg)
 {
 	params->cwmin  = __cpu_to_le32(arg->cwmin);
 	params->cwmax  = __cpu_to_le32(arg->cwmax);
@@ -4903,7 +4903,7 @@ void ath10k_wmi_pdev_set_wmm_param(struct wmi_wmm_params *params,
 
 static struct sk_buff *
 ath10k_wmi_op_gen_pdev_set_wmm(struct ath10k *ar,
-			       const struct wmi_pdev_set_wmm_params_arg *arg)
+			       const struct wmi_wmm_params_all_arg *arg)
 {
 	struct wmi_pdev_set_wmm_params *cmd;
 	struct sk_buff *skb;
@@ -4913,10 +4913,10 @@ ath10k_wmi_op_gen_pdev_set_wmm(struct ath10k *ar,
 		return ERR_PTR(-ENOMEM);
 
 	cmd = (struct wmi_pdev_set_wmm_params *)skb->data;
-	ath10k_wmi_pdev_set_wmm_param(&cmd->ac_be, &arg->ac_be);
-	ath10k_wmi_pdev_set_wmm_param(&cmd->ac_bk, &arg->ac_bk);
-	ath10k_wmi_pdev_set_wmm_param(&cmd->ac_vi, &arg->ac_vi);
-	ath10k_wmi_pdev_set_wmm_param(&cmd->ac_vo, &arg->ac_vo);
+	ath10k_wmi_set_wmm_param(&cmd->ac_be, &arg->ac_be);
+	ath10k_wmi_set_wmm_param(&cmd->ac_bk, &arg->ac_bk);
+	ath10k_wmi_set_wmm_param(&cmd->ac_vi, &arg->ac_vi);
+	ath10k_wmi_set_wmm_param(&cmd->ac_vo, &arg->ac_vo);
 
 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi pdev set wmm params\n");
 	return skb;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 34d8c44..c009393 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -2939,7 +2939,7 @@ struct wmi_wmm_params_arg {
 	u32 no_ack;
 };
 
-struct wmi_pdev_set_wmm_params_arg {
+struct wmi_wmm_params_all_arg {
 	struct wmi_wmm_params_arg ac_be;
 	struct wmi_wmm_params_arg ac_bk;
 	struct wmi_wmm_params_arg ac_vi;
@@ -4869,8 +4869,8 @@ void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
 				    struct wmi_host_mem_chunks *chunks);
 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
 				      const struct wmi_start_scan_arg *arg);
-void ath10k_wmi_pdev_set_wmm_param(struct wmi_wmm_params *params,
-				   const struct wmi_wmm_params_arg *arg);
+void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
+			      const struct wmi_wmm_params_arg *arg);
 void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
 				const struct wmi_channel_arg *arg);
 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
-- 
cgit v1.1


From 6d492fe2d81e84ee49382879bfc13213c6e8e569 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Wed, 28 Jan 2015 09:57:22 +0200
Subject: ath10k: implement per-vdev wmm param setup command

New wmi-tlv firmware for qca6174 supports this.
This will be used soon.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 17 ++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 38 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  4 ++++
 drivers/net/wireless/ath/ath10k/wmi.c     |  3 +++
 drivers/net/wireless/ath/ath10k/wmi.h     |  1 +
 5 files changed, 63 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 6e9e384..987414a 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -78,6 +78,8 @@ struct wmi_ops {
 						  const struct wmi_vdev_spectral_conf_arg *arg);
 	struct sk_buff *(*gen_vdev_spectral_enable)(struct ath10k *ar, u32 vdev_id,
 						    u32 trigger, u32 enable);
+	struct sk_buff *(*gen_vdev_wmm_conf)(struct ath10k *ar, u32 vdev_id,
+					     const struct wmi_wmm_params_all_arg *arg);
 	struct sk_buff *(*gen_peer_create)(struct ath10k *ar, u32 vdev_id,
 					   const u8 peer_addr[ETH_ALEN]);
 	struct sk_buff *(*gen_peer_delete)(struct ath10k *ar, u32 vdev_id,
@@ -601,6 +603,21 @@ ath10k_wmi_vdev_sta_uapsd(struct ath10k *ar, u32 vdev_id,
 }
 
 static inline int
+ath10k_wmi_vdev_wmm_conf(struct ath10k *ar, u32 vdev_id,
+			 const struct wmi_wmm_params_all_arg *arg)
+{
+	struct sk_buff *skb;
+	u32 cmd_id;
+
+	skb = ar->wmi.ops->gen_vdev_wmm_conf(ar, vdev_id, arg);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	cmd_id = ar->wmi.cmd->vdev_set_wmm_params_cmdid;
+	return ath10k_wmi_cmd_send(ar, skb, cmd_id);
+}
+
+static inline int
 ath10k_wmi_peer_create(struct ath10k *ar, u32 vdev_id,
 		       const u8 peer_addr[ETH_ALEN])
 {
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 23a3761..00ca544 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1600,6 +1600,42 @@ static void *ath10k_wmi_tlv_put_wmm(void *ptr,
 }
 
 static struct sk_buff *
+ath10k_wmi_tlv_op_gen_vdev_wmm_conf(struct ath10k *ar, u32 vdev_id,
+				    const struct wmi_wmm_params_all_arg *arg)
+{
+	struct wmi_tlv_vdev_set_wmm_cmd *cmd;
+	struct wmi_wmm_params *wmm;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	size_t len;
+	void *ptr;
+
+	len = (sizeof(*tlv) + sizeof(*cmd)) +
+	      (4 * (sizeof(*tlv) + sizeof(*wmm)));
+	skb = ath10k_wmi_alloc_skb(ar, len);
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	ptr = (void *)skb->data;
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_VDEV_SET_WMM_PARAMS_CMD);
+	tlv->len = __cpu_to_le16(sizeof(*cmd));
+	cmd = (void *)tlv->value;
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*cmd);
+
+	ptr = ath10k_wmi_tlv_put_wmm(ptr, &arg->ac_be);
+	ptr = ath10k_wmi_tlv_put_wmm(ptr, &arg->ac_bk);
+	ptr = ath10k_wmi_tlv_put_wmm(ptr, &arg->ac_vi);
+	ptr = ath10k_wmi_tlv_put_wmm(ptr, &arg->ac_vo);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev wmm conf\n");
+	return skb;
+}
+
+static struct sk_buff *
 ath10k_wmi_tlv_op_gen_peer_create(struct ath10k *ar, u32 vdev_id,
 				  const u8 peer_addr[ETH_ALEN])
 {
@@ -2426,6 +2462,7 @@ static struct wmi_cmd_map wmi_tlv_cmd_map = {
 	.gpio_config_cmdid = WMI_TLV_GPIO_CONFIG_CMDID,
 	.gpio_output_cmdid = WMI_TLV_GPIO_OUTPUT_CMDID,
 	.pdev_get_temperature_cmdid = WMI_TLV_CMD_UNSUPPORTED,
+	.vdev_set_wmm_params_cmdid = WMI_TLV_VDEV_SET_WMM_PARAMS_CMDID,
 };
 
 static struct wmi_pdev_param_map wmi_tlv_pdev_param_map = {
@@ -2569,6 +2606,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_vdev_down = ath10k_wmi_tlv_op_gen_vdev_down,
 	.gen_vdev_set_param = ath10k_wmi_tlv_op_gen_vdev_set_param,
 	.gen_vdev_install_key = ath10k_wmi_tlv_op_gen_vdev_install_key,
+	.gen_vdev_wmm_conf = ath10k_wmi_tlv_op_gen_vdev_wmm_conf,
 	.gen_peer_create = ath10k_wmi_tlv_op_gen_peer_create,
 	.gen_peer_delete = ath10k_wmi_tlv_op_gen_peer_delete,
 	.gen_peer_flush = ath10k_wmi_tlv_op_gen_peer_flush,
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 87db762..3dc43b9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1302,6 +1302,10 @@ struct wmi_tlv_pdev_set_wmm_cmd {
 	__le32 dg_type; /* no idea.. */
 } __packed;
 
+struct wmi_tlv_vdev_set_wmm_cmd {
+	__le32 vdev_id;
+} __packed;
+
 struct wmi_tlv_phyerr_ev {
 	__le32 num_phyerrs;
 	__le32 tsf_l32;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 050e508..81561e4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -5188,6 +5188,7 @@ static const struct wmi_ops wmi_ops = {
 	.gen_vdev_install_key = ath10k_wmi_op_gen_vdev_install_key,
 	.gen_vdev_spectral_conf = ath10k_wmi_op_gen_vdev_spectral_conf,
 	.gen_vdev_spectral_enable = ath10k_wmi_op_gen_vdev_spectral_enable,
+	/* .gen_vdev_wmm_conf not implemented */
 	.gen_peer_create = ath10k_wmi_op_gen_peer_create,
 	.gen_peer_delete = ath10k_wmi_op_gen_peer_delete,
 	.gen_peer_flush = ath10k_wmi_op_gen_peer_flush,
@@ -5251,6 +5252,7 @@ static const struct wmi_ops wmi_10_1_ops = {
 	.gen_vdev_install_key = ath10k_wmi_op_gen_vdev_install_key,
 	.gen_vdev_spectral_conf = ath10k_wmi_op_gen_vdev_spectral_conf,
 	.gen_vdev_spectral_enable = ath10k_wmi_op_gen_vdev_spectral_enable,
+	/* .gen_vdev_wmm_conf not implemented */
 	.gen_peer_create = ath10k_wmi_op_gen_peer_create,
 	.gen_peer_delete = ath10k_wmi_op_gen_peer_delete,
 	.gen_peer_flush = ath10k_wmi_op_gen_peer_flush,
@@ -5313,6 +5315,7 @@ static const struct wmi_ops wmi_10_2_ops = {
 	.gen_vdev_install_key = ath10k_wmi_op_gen_vdev_install_key,
 	.gen_vdev_spectral_conf = ath10k_wmi_op_gen_vdev_spectral_conf,
 	.gen_vdev_spectral_enable = ath10k_wmi_op_gen_vdev_spectral_enable,
+	/* .gen_vdev_wmm_conf not implemented */
 	.gen_peer_create = ath10k_wmi_op_gen_peer_create,
 	.gen_peer_delete = ath10k_wmi_op_gen_peer_delete,
 	.gen_peer_flush = ath10k_wmi_op_gen_peer_flush,
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index c009393..3c48e0d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -551,6 +551,7 @@ struct wmi_cmd_map {
 	u32 gpio_config_cmdid;
 	u32 gpio_output_cmdid;
 	u32 pdev_get_temperature_cmdid;
+	u32 vdev_set_wmm_params_cmdid;
 };
 
 /*
-- 
cgit v1.1


From 7fc979a79d9b9af15052b4c7fd1debd44294ba4f Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Wed, 28 Jan 2015 09:57:28 +0200
Subject: ath10k: use per-vif wmm param setup if possible

New wmi-tlv firmware for qca6174 supports this.

This should fix issues related to multi-vif WMM.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 62e8adc..0c2ccc1 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4129,11 +4129,23 @@ static int ath10k_conf_tx(struct ieee80211_hw *hw,
 	 */
 	p->txop = params->txop * 32;
 
-	/* FIXME: FW accepts wmm params per hw, not per vif */
-	ret = ath10k_wmi_pdev_set_wmm_params(ar, &arvif->wmm_params);
-	if (ret) {
-		ath10k_warn(ar, "failed to set wmm params: %d\n", ret);
-		goto exit;
+	if (ar->wmi.ops->gen_vdev_wmm_conf) {
+		ret = ath10k_wmi_vdev_wmm_conf(ar, arvif->vdev_id,
+					       &arvif->wmm_params);
+		if (ret) {
+			ath10k_warn(ar, "failed to set vdev wmm params on vdev %i: %d\n",
+				    arvif->vdev_id, ret);
+			goto exit;
+		}
+	} else {
+		/* This won't work well with multi-interface cases but it's
+		 * better than nothing.
+		 */
+		ret = ath10k_wmi_pdev_set_wmm_params(ar, &arvif->wmm_params);
+		if (ret) {
+			ath10k_warn(ar, "failed to set wmm params: %d\n", ret);
+			goto exit;
+		}
 	}
 
 	ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd);
-- 
cgit v1.1


From 6e8b188ba782bd04f942b7d489b8b2b81606f690 Mon Sep 17 00:00:00 2001
From: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Date: Wed, 28 Jan 2015 09:57:39 +0200
Subject: ath10k: implement sta keepalive command

New wmi-tlv firmware for qca6174 has STA keepalive
service available. The service can provide
automatic idle connection polling via NullFunc
frames to AP when acting as a client.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 20 ++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 45 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |  7 +++++
 drivers/net/wireless/ath/ath10k/wmi.h     | 10 +++++++
 4 files changed, 82 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 987414a..058f88b 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -143,6 +143,8 @@ struct wmi_ops {
 					      const u8 peer_addr[ETH_ALEN],
 					      const struct wmi_sta_uapsd_auto_trig_arg *args,
 					      u32 num_ac);
+	struct sk_buff *(*gen_sta_keepalive)(struct ath10k *ar,
+					     const struct wmi_sta_keepalive_arg *arg);
 };
 
 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
@@ -1034,4 +1036,22 @@ ath10k_wmi_p2p_go_bcn_ie(struct ath10k *ar, u32 vdev_id, const u8 *p2p_ie)
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->p2p_go_set_beacon_ie);
 }
 
+static inline int
+ath10k_wmi_sta_keepalive(struct ath10k *ar,
+			 const struct wmi_sta_keepalive_arg *arg)
+{
+	struct sk_buff *skb;
+	u32 cmd_id;
+
+	if (!ar->wmi.ops->gen_sta_keepalive)
+		return -EOPNOTSUPP;
+
+	skb = ar->wmi.ops->gen_sta_keepalive(ar, arg);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	cmd_id = ar->wmi.cmd->sta_keepalive_cmd;
+	return ath10k_wmi_cmd_send(ar, skb, cmd_id);
+}
+
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 00ca544..be32db9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1636,6 +1636,50 @@ ath10k_wmi_tlv_op_gen_vdev_wmm_conf(struct ath10k *ar, u32 vdev_id,
 }
 
 static struct sk_buff *
+ath10k_wmi_tlv_op_gen_sta_keepalive(struct ath10k *ar,
+				    const struct wmi_sta_keepalive_arg *arg)
+{
+	struct wmi_tlv_sta_keepalive_cmd *cmd;
+	struct wmi_sta_keepalive_arp_resp *arp;
+	struct sk_buff *skb;
+	struct wmi_tlv *tlv;
+	void *ptr;
+	size_t len;
+
+	len = sizeof(*tlv) + sizeof(*cmd) +
+	      sizeof(*tlv) + sizeof(*arp);
+	skb = ath10k_wmi_alloc_skb(ar, len);
+	if (!skb)
+		return ERR_PTR(-ENOMEM);
+
+	ptr = (void *)skb->data;
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_STA_KEEPALIVE_CMD);
+	tlv->len = __cpu_to_le16(sizeof(*cmd));
+	cmd = (void *)tlv->value;
+	cmd->vdev_id = __cpu_to_le32(arg->vdev_id);
+	cmd->enabled = __cpu_to_le32(arg->enabled);
+	cmd->method = __cpu_to_le32(arg->method);
+	cmd->interval = __cpu_to_le32(arg->interval);
+
+	ptr += sizeof(*tlv);
+	ptr += sizeof(*cmd);
+
+	tlv = ptr;
+	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_STA_KEEPALVE_ARP_RESPONSE);
+	tlv->len = __cpu_to_le16(sizeof(*arp));
+	arp = (void *)tlv->value;
+
+	arp->src_ip4_addr = arg->src_ip4_addr;
+	arp->dest_ip4_addr = arg->dest_ip4_addr;
+	ether_addr_copy(arp->dest_mac_addr.addr, arg->dest_mac_addr);
+
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv sta keepalive vdev %d enabled %d method %d inverval %d\n",
+		   arg->vdev_id, arg->enabled, arg->method, arg->interval);
+	return skb;
+}
+
+static struct sk_buff *
 ath10k_wmi_tlv_op_gen_peer_create(struct ath10k *ar, u32 vdev_id,
 				  const u8 peer_addr[ETH_ALEN])
 {
@@ -2634,6 +2678,7 @@ static const struct wmi_ops wmi_tlv_ops = {
 	.gen_prb_tmpl = ath10k_wmi_tlv_op_gen_prb_tmpl,
 	.gen_p2p_go_bcn_ie = ath10k_wmi_tlv_op_gen_p2p_go_bcn_ie,
 	.gen_vdev_sta_uapsd = ath10k_wmi_tlv_op_gen_vdev_sta_uapsd,
+	.gen_sta_keepalive = ath10k_wmi_tlv_op_gen_sta_keepalive,
 };
 
 /************/
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
index 3dc43b9..de68fe7 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h
@@ -1432,6 +1432,13 @@ struct wmi_tlv_diag_data_ev {
 	__le32 num_items;
 } __packed;
 
+struct wmi_tlv_sta_keepalive_cmd {
+	__le32 vdev_id;
+	__le32 enabled;
+	__le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
+	__le32 interval; /* in seconds */
+} __packed;
+
 void ath10k_wmi_tlv_attach(struct ath10k *ar);
 
 #endif
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 3c48e0d..1a99a7d 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4680,6 +4680,16 @@ struct wmi_sta_keepalive_cmd {
 	struct wmi_sta_keepalive_arp_resp arp_resp;
 } __packed;
 
+struct wmi_sta_keepalive_arg {
+	u32 vdev_id;
+	u32 enabled;
+	u32 method;
+	u32 interval;
+	__be32 src_ip4_addr;
+	__be32 dest_ip4_addr;
+	const u8 dest_mac_addr[ETH_ALEN];
+};
+
 enum wmi_force_fw_hang_type {
 	WMI_FORCE_FW_HANG_ASSERT = 1,
 	WMI_FORCE_FW_HANG_NO_DETECT,
-- 
cgit v1.1


From 46725b15334ca0598f1cc7ea34d2f6963bec11cb Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Wed, 28 Jan 2015 09:57:49 +0200
Subject: ath10k: disable sta keepalive

Firmware revisions providing sta keepalive service
have it enabled by default.

mac80211 already does idle connection polling so
it makes no sense to duplicate this in ath10k.
mac80211 wouldn't even know of the offloaded
keepalive NullFunc frames.

This prevents sending out some extraneous frames
on the air.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 42 +++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h |  5 +++++
 2 files changed, 47 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 0c2ccc1..4ee74f6 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1286,6 +1286,38 @@ static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif)
 	return 0;
 }
 
+static int ath10k_mac_vif_disable_keepalive(struct ath10k_vif *arvif)
+{
+	struct ath10k *ar = arvif->ar;
+	struct wmi_sta_keepalive_arg arg = {};
+	int ret;
+
+	lockdep_assert_held(&arvif->ar->conf_mutex);
+
+	if (arvif->vdev_type != WMI_VDEV_TYPE_STA)
+		return 0;
+
+	if (!test_bit(WMI_SERVICE_STA_KEEP_ALIVE, ar->wmi.svc_map))
+		return 0;
+
+	/* Some firmware revisions have a bug and ignore the `enabled` field.
+	 * Instead use the interval to disable the keepalive.
+	 */
+	arg.vdev_id = arvif->vdev_id;
+	arg.enabled = 1;
+	arg.method = WMI_STA_KEEPALIVE_METHOD_NULL_FRAME;
+	arg.interval = WMI_STA_KEEPALIVE_INTERVAL_DISABLE;
+
+	ret = ath10k_wmi_sta_keepalive(ar, &arg);
+	if (ret) {
+		ath10k_warn(ar, "failed to submit keepalive on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 /**********************/
 /* Station management */
 /**********************/
@@ -3180,6 +3212,16 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	ar->free_vdev_map &= ~(1LL << arvif->vdev_id);
 	list_add(&arvif->list, &ar->arvifs);
 
+	/* It makes no sense to have firmware do keepalives. mac80211 already
+	 * takes care of this with idle connection polling.
+	 */
+	ret = ath10k_mac_vif_disable_keepalive(arvif);
+	if (ret) {
+		ath10k_warn(ar, "failed to disable keepalive on vdev %i: %d\n",
+			    arvif->vdev_id, ret);
+		goto err_vdev_delete;
+	}
+
 	vdev_param = ar->wmi.vdev_param->def_keyid;
 	ret = ath10k_wmi_vdev_set_param(ar, 0, vdev_param,
 					arvif->def_wep_key_idx);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1a99a7d..4b65408 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4665,6 +4665,11 @@ enum wmi_sta_keepalive_method {
 	WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
 };
 
+#define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
+
+/* Firmware crashes if keepalive interval exceeds this limit */
+#define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
+
 /* note: ip4 addresses are in network byte order, i.e. big endian */
 struct wmi_sta_keepalive_arp_resp {
 	__be32 src_ip4_addr;
-- 
cgit v1.1


From d68bb12ab4a306ee76ab33a57b2a0067d4d5092d Mon Sep 17 00:00:00 2001
From: Yanbo Li <yanbol@qti.qualcomm.com>
Date: Fri, 23 Jan 2015 08:18:20 +0800
Subject: ath10k: Enable the MCS8 and MCS9 at 2.4G band

Enable the MCS8 and MCS9 support for 2.4G band, it will
use these data rate with other devices having the same
capability.

Signed-off-by: Yanbo Li <yanbol@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 14 ++++++++++++--
 drivers/net/wireless/ath/ath10k/wmi.h |  2 +-
 2 files changed, 13 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 4ee74f6..f9440de 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1586,6 +1586,10 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
 		return;
 
 	arg->peer_flags |= WMI_PEER_VHT;
+
+	if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ)
+		arg->peer_flags |= WMI_PEER_VHT_2G;
+
 	arg->peer_vht_caps = vht_cap->cap;
 
 	ampdu_factor = (vht_cap->cap &
@@ -1664,7 +1668,12 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
 
 	switch (ar->hw->conf.chandef.chan->band) {
 	case IEEE80211_BAND_2GHZ:
-		if (sta->ht_cap.ht_supported) {
+		if (sta->vht_cap.vht_supported) {
+			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
+				phymode = MODE_11AC_VHT40;
+			else
+				phymode = MODE_11AC_VHT20;
+		} else if (sta->ht_cap.ht_supported) {
 			if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
 				phymode = MODE_11NG_HT40;
 			else
@@ -5301,7 +5310,8 @@ int ath10k_mac_register(struct ath10k *ar)
 		band->bitrates = ath10k_g_rates;
 		band->ht_cap = ht_cap;
 
-		/* vht is not supported in 2.4 GHz */
+		/* Enable the VHT support at 2.4 GHz */
+		band->vht_cap = vht_cap;
 
 		ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
 	}
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 4b65408..20ce360 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4514,7 +4514,7 @@ struct wmi_peer_set_q_empty_callback_cmd {
 #define WMI_PEER_SPATIAL_MUX    0x00200000
 #define WMI_PEER_VHT            0x02000000
 #define WMI_PEER_80MHZ          0x04000000
-#define WMI_PEER_PMF            0x08000000
+#define WMI_PEER_VHT_2G         0x08000000
 
 /*
  * Peer rate capabilities.
-- 
cgit v1.1


From 6c3d7d785966f89bda1be17aef59ad14ce321f38 Mon Sep 17 00:00:00 2001
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Date: Mon, 26 Jan 2015 22:13:06 +0530
Subject: ath10k: fix target wakeup timeout

During drv_start/drv_stop stress testing in ARM platform,
sometimes target is taking more that 5ms to wake up. Similar
behaviour also noted during driver load and unload iterations.
On such cases, the wakup duration lies between 5-6ms. Hence
increasing pci wakup timeout 10ms to be more safer. With this
changes, able to complete power down/up >100 iterations without
any issues.

Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/pci.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h
index ce4a1ef..bddf543 100644
--- a/drivers/net/wireless/ath/ath10k/pci.h
+++ b/drivers/net/wireless/ath/ath10k/pci.h
@@ -194,7 +194,7 @@ static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar)
 
 #define ATH10K_PCI_RX_POST_RETRY_MS 50
 #define ATH_PCI_RESET_WAIT_MAX 10 /* ms */
-#define PCIE_WAKE_TIMEOUT 5000	/* 5ms */
+#define PCIE_WAKE_TIMEOUT 10000	/* 10ms */
 
 #define BAR_NUM 0
 
-- 
cgit v1.1


From 60f1071c22423a6eb937d01148244cae9a68c0fd Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@intel.com>
Date: Wed, 28 Jan 2015 09:00:27 +0200
Subject: iwlwifi: mvm: don't reprobe if we fail during reconfig and fw_restart
 is false

If we don't want to restart the firmware, don't reprobe either in case
of a failure during reconfiguration.  This allows us to debug failures
in the reconfig flow as well.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/ops.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index 8bf8c2a..b1dea68 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -870,7 +870,10 @@ void iwl_mvm_nic_restart(struct iwl_mvm *mvm, bool fw_error)
 	 * If WoWLAN fw asserted, don't restart either, mac80211
 	 * can't recover this since we're already half suspended.
 	 */
-	if (test_and_set_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status)) {
+	if (!mvm->restart_fw && fw_error) {
+		schedule_work(&mvm->fw_error_dump_wk);
+	} else if (test_and_set_bit(IWL_MVM_STATUS_IN_HW_RESTART,
+				    &mvm->status)) {
 		struct iwl_mvm_reprobe *reprobe;
 
 		IWL_ERR(mvm,
@@ -894,16 +897,13 @@ void iwl_mvm_nic_restart(struct iwl_mvm *mvm, bool fw_error)
 		reprobe->dev = mvm->trans->dev;
 		INIT_WORK(&reprobe->work, iwl_mvm_reprobe_wk);
 		schedule_work(&reprobe->work);
-	} else if (mvm->cur_ucode == IWL_UCODE_REGULAR &&
-		   (!fw_error || mvm->restart_fw)) {
+	} else if (mvm->cur_ucode == IWL_UCODE_REGULAR) {
 		/* don't let the transport/FW power down */
 		iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN);
 
 		if (fw_error && mvm->restart_fw > 0)
 			mvm->restart_fw--;
 		ieee80211_restart_hw(mvm->hw);
-	} else if (fw_error) {
-		schedule_work(&mvm->fw_error_dump_wk);
 	}
 }
 
-- 
cgit v1.1


From edbad05131a3d94f997eb6c8040aab40f4fffe48 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Wed, 28 Jan 2015 23:43:24 +0100
Subject: iwlwifi: mvm: remove space padding after sysassert description

There's really no reason to pad out the field with spaces at the
end of the line - they're practically invisible there anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/utils.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index 4eb3cad..02f434d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -432,7 +432,7 @@ static void iwl_mvm_dump_umac_error_log(struct iwl_mvm *mvm)
 			mvm->status, table.valid);
 	}
 
-	IWL_ERR(mvm, "0x%08X | %-28s\n", table.error_id,
+	IWL_ERR(mvm, "0x%08X | %s\n", table.error_id,
 		desc_lookup(table.error_id));
 	IWL_ERR(mvm, "0x%08X | umac branchlink1\n", table.blink1);
 	IWL_ERR(mvm, "0x%08X | umac branchlink2\n", table.blink2);
-- 
cgit v1.1


From 5523d11cc46393a1e61b7ef4a0b2d4e7ed9521e4 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@intel.com>
Date: Thu, 29 Jan 2015 12:48:20 +0200
Subject: iwlwifi: mvm: always use mac color zero

We don't really need to use different mac colors when adding mac
contexts, because they're not used anywhere.  In fact, the firmware
doesn't accept 255 as a valid color, so we get into a SYSASSERT 0x3401
when we reach that.

Remove the color increment to use always zero and avoid reaching 255.

CC: <stable@vger.kernel.org> [3.10+]
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index cef6f33..cfd7bfc 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -707,9 +707,6 @@ static void iwl_mvm_cleanup_iterator(void *data, u8 *mac,
 	mvmvif->uploaded = false;
 	mvmvif->ap_sta_id = IWL_MVM_STATION_COUNT;
 
-	/* does this make sense at all? */
-	mvmvif->color++;
-
 	spin_lock_bh(&mvm->time_event_lock);
 	iwl_mvm_te_clear_data(mvm, &mvmvif->time_event_data);
 	spin_unlock_bh(&mvm->time_event_lock);
-- 
cgit v1.1


From e885c58bf88248a7e033749f532c3718442de22a Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 25 Jan 2015 15:54:40 +0200
Subject: iwlwifi: pcie: don't dump useless data when a TFD queue hangs

Printing all the scratch data of the TFDs of that queue is
useless and stuffed the kernel log with data. Remove that.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/tx.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index d40cd4a..6c7bfe8 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -147,7 +147,6 @@ static void iwl_pcie_free_dma_ptr(struct iwl_trans *trans,
 static void iwl_pcie_txq_stuck_timer(unsigned long data)
 {
 	struct iwl_txq *txq = (void *)data;
-	struct iwl_queue *q = &txq->q;
 	struct iwl_trans_pcie *trans_pcie = txq->trans_pcie;
 	struct iwl_trans *trans = iwl_trans_pcie_get_trans(trans_pcie);
 	u32 scd_sram_addr = trans_pcie->scd_base_addr +
@@ -198,11 +197,6 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data)
 			iwl_read_prph(trans, SCD_QUEUE_WRPTR(i)));
 	}
 
-	for (i = q->read_ptr; i != q->write_ptr;
-	     i = iwl_queue_inc_wrap(i))
-		IWL_ERR(trans, "scratch %d = 0x%08x\n", i,
-			le32_to_cpu(txq->scratchbufs[i].scratch));
-
 	iwl_force_nmi(trans);
 }
 
-- 
cgit v1.1


From 3d44eebf773950dd2e24ad7ac786b589d6522d67 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Fri, 16 Jan 2015 22:37:04 +0200
Subject: iwlwifi: mvm: add beamformer support

VHT Beamformer (BFER) will be used if the peer supports it
and there's a benefit to use it vs. STBC or SISO.
The driver now tells the FW whether BFER and/or STBC are
allowed but the FW will make the decision to use either
or stick to SISO on its own.
BFER is limited to a single remote peer. The driver takes
care of ensuring this to the FW and prioritizes with which
peer BFER will be used.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-fw-file.h   |   2 +
 drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h |  35 ++++--
 drivers/net/wireless/iwlwifi/mvm/mac80211.c  |   7 +-
 drivers/net/wireless/iwlwifi/mvm/rs.c        | 157 ++++++++++++++++++++++++---
 drivers/net/wireless/iwlwifi/mvm/rs.h        |   4 +-
 5 files changed, 177 insertions(+), 28 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
index e4f5898..016d913 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h
@@ -270,6 +270,7 @@ enum iwl_ucode_tlv_api {
  * @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
  * @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
  * @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
+ * @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
  * @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
  * @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
  *	tx power value into TPC Report action frame and Link Measurement Report
@@ -288,6 +289,7 @@ enum iwl_ucode_tlv_capa {
 	IWL_UCODE_TLV_CAPA_D0I3_SUPPORT			= BIT(0),
 	IWL_UCODE_TLV_CAPA_LAR_SUPPORT			= BIT(1),
 	IWL_UCODE_TLV_CAPA_UMAC_SCAN			= BIT(2),
+	IWL_UCODE_TLV_CAPA_BEAMFORMER			= BIT(3),
 	IWL_UCODE_TLV_CAPA_TDLS_SUPPORT			= BIT(6),
 	IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT	= BIT(8),
 	IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT	= BIT(9),
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h
index 6a2a6b0..4c33f27 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h
@@ -308,16 +308,33 @@ enum {
 #define LQ_FLAG_DYNAMIC_BW_POS          6
 #define LQ_FLAG_DYNAMIC_BW_MSK          (1 << LQ_FLAG_DYNAMIC_BW_POS)
 
-/* Single Stream Parameters
- * SS_STBC/BFER_ALLOWED - Controls whether STBC or Beamformer (BFER) is allowed
- * ucode will make a smart decision between SISO/STBC/BFER
- * SS_PARAMS_VALID - if not set ignore the ss_params field.
+/* Single Stream Tx Parameters (lq_cmd->ss_params)
+ * Flags to control a smart FW decision about whether BFER/STBC/SISO will be
+ * used for single stream Tx.
  */
-enum {
-	RS_SS_STBC_ALLOWED = BIT(0),
-	RS_SS_BFER_ALLOWED = BIT(1),
-	RS_SS_PARAMS_VALID = BIT(31),
-};
+
+/* Bit 0-1: Max STBC streams allowed. Can be 0-3.
+ * (0) - No STBC allowed
+ * (1) - 2x1 STBC allowed (HT/VHT)
+ * (2) - 4x2 STBC allowed (HT/VHT)
+ * (3) - 3x2 STBC allowed (HT only)
+ * All our chips are at most 2 antennas so only (1) is valid for now.
+ */
+#define LQ_SS_STBC_ALLOWED_POS          0
+#define LQ_SS_STBC_ALLOWED_MSK		(3 << LQ_SS_STBC_ALLOWED_MSK)
+
+/* 2x1 STBC is allowed */
+#define LQ_SS_STBC_1SS_ALLOWED		(1 << LQ_SS_STBC_ALLOWED_POS)
+
+/* Bit 2: Beamformer (VHT only) is allowed */
+#define LQ_SS_BFER_ALLOWED_POS		2
+#define LQ_SS_BFER_ALLOWED		(1 << LQ_SS_BFER_ALLOWED_POS)
+
+/* Bit 31: ss_params field is valid. Used for FW backward compatibility
+ * with other drivers which don't support the ss_params API yet
+ */
+#define LQ_SS_PARAMS_VALID_POS		31
+#define LQ_SS_PARAMS_VALID		(1 << LQ_SS_PARAMS_VALID_POS)
 
 /**
  * struct iwl_lq_cmd - link quality command
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index cfd7bfc..51e02e6 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -401,10 +401,15 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm)
 	if (mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels)
 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 			&mvm->nvm_data->bands[IEEE80211_BAND_2GHZ];
-	if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels)
+	if (mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels) {
 		hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 			&mvm->nvm_data->bands[IEEE80211_BAND_5GHZ];
 
+		if (mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_BEAMFORMER)
+			hw->wiphy->bands[IEEE80211_BAND_5GHZ]->vht_cap.cap |=
+				IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE;
+	}
+
 	hw->wiphy->hw_version = mvm->trans->hw_id;
 
 	if (iwlmvm_mod_params.power_scheme != IWL_POWER_SCHEME_CAM)
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 9f32f2d..95b718b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -1805,7 +1805,7 @@ static bool rs_stbc_allow(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 	/* Our chip supports Tx STBC and the peer is an HT/VHT STA which
 	 * supports STBC of at least 1*SS
 	 */
-	if (!lq_sta->stbc)
+	if (!lq_sta->stbc_capable)
 		return false;
 
 	if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta))
@@ -2626,7 +2626,7 @@ static void rs_ht_init(struct iwl_mvm *mvm,
 	if (mvm->cfg->ht_params->stbc &&
 	    (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) &&
 	    (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC))
-		lq_sta->stbc = true;
+		lq_sta->stbc_capable = true;
 
 	lq_sta->is_vht = false;
 }
@@ -2645,7 +2645,12 @@ static void rs_vht_init(struct iwl_mvm *mvm,
 	if (mvm->cfg->ht_params->stbc &&
 	    (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) &&
 	    (vht_cap->cap & IEEE80211_VHT_CAP_RXSTBC_MASK))
-		lq_sta->stbc = true;
+		lq_sta->stbc_capable = true;
+
+	if ((mvm->fw->ucode_capa.capa[0] & IWL_UCODE_TLV_CAPA_BEAMFORMER) &&
+	    (num_of_ant(iwl_mvm_get_valid_tx_ant(mvm)) > 1) &&
+	    (vht_cap->cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE))
+		lq_sta->bfer_capable = true;
 
 	lq_sta->is_vht = true;
 }
@@ -2778,11 +2783,12 @@ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
 		rs_get_max_rate_from_mask(lq_sta->active_mimo2_rate);
 
 	IWL_DEBUG_RATE(mvm,
-		       "RATE MASK: LEGACY=%lX SISO=%lX MIMO2=%lX VHT=%d LDPC=%d STBC=%d\n",
+		       "LEGACY=%lX SISO=%lX MIMO2=%lX VHT=%d LDPC=%d STBC=%d BFER=%d\n",
 		       lq_sta->active_legacy_rate,
 		       lq_sta->active_siso_rate,
 		       lq_sta->active_mimo2_rate,
-		       lq_sta->is_vht, lq_sta->ldpc, lq_sta->stbc);
+		       lq_sta->is_vht, lq_sta->ldpc, lq_sta->stbc_capable,
+		       lq_sta->bfer_capable);
 	IWL_DEBUG_RATE(mvm, "MAX RATE: LEGACY=%d SISO=%d MIMO2=%d\n",
 		       lq_sta->max_legacy_rate_idx,
 		       lq_sta->max_siso_rate_idx,
@@ -2916,23 +2922,15 @@ static void rs_build_rates_table(struct iwl_mvm *mvm,
 	u8 valid_tx_ant = 0;
 	struct iwl_lq_cmd *lq_cmd = &lq_sta->lq;
 	bool toggle_ant = false;
-	bool stbc_allowed = false;
 
 	memcpy(&rate, initial_rate, sizeof(rate));
 
 	valid_tx_ant = iwl_mvm_get_valid_tx_ant(mvm);
 
-	stbc_allowed = rs_stbc_allow(mvm, sta, lq_sta);
-	if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LQ_SS_PARAMS) {
-		u32 ss_params = RS_SS_PARAMS_VALID;
-
-		if (stbc_allowed)
-			ss_params |= RS_SS_STBC_ALLOWED;
-		lq_cmd->ss_params = cpu_to_le32(ss_params);
-	} else {
-		/* TODO: remove old API when min FW API hits 14 */
-		rate.stbc = stbc_allowed;
-	}
+	/* TODO: remove old API when min FW API hits 14 */
+	if (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LQ_SS_PARAMS) &&
+	    rs_stbc_allow(mvm, sta, lq_sta))
+		rate.stbc = true;
 
 	if (is_siso(&rate)) {
 		num_rates = IWL_MVM_RS_INITIAL_SISO_NUM_RATES;
@@ -2980,6 +2978,128 @@ static void rs_build_rates_table(struct iwl_mvm *mvm,
 
 }
 
+struct rs_bfer_active_iter_data {
+	struct ieee80211_sta *exclude_sta;
+	struct iwl_mvm_sta *bfer_mvmsta;
+};
+
+static void rs_bfer_active_iter(void *_data,
+				struct ieee80211_sta *sta)
+{
+	struct rs_bfer_active_iter_data *data = _data;
+	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	struct iwl_lq_cmd *lq_cmd = &mvmsta->lq_sta.lq;
+	u32 ss_params = le32_to_cpu(lq_cmd->ss_params);
+
+	if (sta == data->exclude_sta)
+		return;
+
+	/* The current sta has BFER allowed */
+	if (ss_params & LQ_SS_BFER_ALLOWED) {
+		WARN_ON_ONCE(data->bfer_mvmsta != NULL);
+
+		data->bfer_mvmsta = mvmsta;
+	}
+}
+
+static int rs_bfer_priority(struct iwl_mvm_sta *sta)
+{
+	int prio = -1;
+	enum nl80211_iftype viftype = ieee80211_vif_type_p2p(sta->vif);
+
+	switch (viftype) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
+		prio = 3;
+		break;
+	case NL80211_IFTYPE_P2P_CLIENT:
+		prio = 2;
+		break;
+	case NL80211_IFTYPE_STATION:
+		prio = 1;
+		break;
+	default:
+		WARN_ONCE(true, "viftype %d sta_id %d", viftype, sta->sta_id);
+		prio = -1;
+	}
+
+	return prio;
+}
+
+/* Returns >0 if sta1 has a higher BFER priority compared to sta2 */
+static int rs_bfer_priority_cmp(struct iwl_mvm_sta *sta1,
+				struct iwl_mvm_sta *sta2)
+{
+	int prio1 = rs_bfer_priority(sta1);
+	int prio2 = rs_bfer_priority(sta2);
+
+	if (prio1 > prio2)
+		return 1;
+	if (prio1 < prio2)
+		return -1;
+	return 0;
+}
+
+static void rs_set_lq_ss_params(struct iwl_mvm *mvm,
+				struct ieee80211_sta *sta,
+				struct iwl_lq_sta *lq_sta,
+				const struct rs_rate *initial_rate)
+{
+	struct iwl_lq_cmd *lq_cmd = &lq_sta->lq;
+	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	struct rs_bfer_active_iter_data data = {
+		.exclude_sta = sta,
+		.bfer_mvmsta = NULL,
+	};
+	struct iwl_mvm_sta *bfer_mvmsta = NULL;
+	u32 ss_params = LQ_SS_PARAMS_VALID;
+
+	if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta))
+		goto out;
+
+	if (lq_sta->stbc_capable)
+		ss_params |= LQ_SS_STBC_1SS_ALLOWED;
+
+	if (!lq_sta->bfer_capable)
+		goto out;
+
+	ieee80211_iterate_stations_atomic(mvm->hw,
+					  rs_bfer_active_iter,
+					  &data);
+	bfer_mvmsta = data.bfer_mvmsta;
+
+	/* This code is safe as it doesn't run concurrently for different
+	 * stations. This is guaranteed by the fact that calls to
+	 * ieee80211_tx_status wouldn't run concurrently for a single HW.
+	 */
+	if (!bfer_mvmsta) {
+		IWL_DEBUG_RATE(mvm, "No sta with BFER allowed found. Allow\n");
+
+		ss_params |= LQ_SS_BFER_ALLOWED;
+		goto out;
+	}
+
+	IWL_DEBUG_RATE(mvm, "Found existing sta %d with BFER activated\n",
+		       bfer_mvmsta->sta_id);
+
+	/* Disallow BFER on another STA if active and we're a higher priority */
+	if (rs_bfer_priority_cmp(mvmsta, bfer_mvmsta) > 0) {
+		struct iwl_lq_cmd *bfersta_lq_cmd = &bfer_mvmsta->lq_sta.lq;
+		u32 bfersta_ss_params = le32_to_cpu(bfersta_lq_cmd->ss_params);
+
+		bfersta_ss_params &= ~LQ_SS_BFER_ALLOWED;
+		bfersta_lq_cmd->ss_params = cpu_to_le32(bfersta_ss_params);
+		iwl_mvm_send_lq_cmd(mvm, bfersta_lq_cmd, false);
+
+		ss_params |= LQ_SS_BFER_ALLOWED;
+		IWL_DEBUG_RATE(mvm,
+			       "Lower priority BFER sta found (%d). Switch BFER\n",
+			       bfer_mvmsta->sta_id);
+	}
+out:
+	lq_cmd->ss_params = cpu_to_le32(ss_params);
+}
+
 static void rs_fill_lq_cmd(struct iwl_mvm *mvm,
 			   struct ieee80211_sta *sta,
 			   struct iwl_lq_sta *lq_sta,
@@ -3006,6 +3126,9 @@ static void rs_fill_lq_cmd(struct iwl_mvm *mvm,
 
 	rs_build_rates_table(mvm, sta, lq_sta, initial_rate);
 
+	if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LQ_SS_PARAMS)
+		rs_set_lq_ss_params(mvm, sta, lq_sta, initial_rate);
+
 	if (num_of_ant(initial_rate->ant) == 1)
 		lq_cmd->single_stream_ant_msk = initial_rate->ant;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index f8f5bf2..ba57f5a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -293,7 +293,9 @@ struct iwl_lq_sta {
 	u64 last_tx;
 	bool is_vht;
 	bool ldpc;              /* LDPC Rx is supported by the STA */
-	bool stbc;              /* Tx STBC is supported by chip and Rx by STA */
+	bool stbc_capable;      /* Tx STBC is supported by chip and Rx by STA */
+	bool bfer_capable;      /* Remote supports beamformee and we BFer */
+
 	enum ieee80211_band band;
 
 	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
-- 
cgit v1.1


From 1e9c62fa9158f35dfd73ef6231154710154e6e09 Mon Sep 17 00:00:00 2001
From: Eyal Shapira <eyal@wizery.com>
Date: Wed, 28 Jan 2015 14:44:06 +0200
Subject: iwlwifi: mvm: rs: enable forcing single stream Tx decision

In certain testing scenarios we'd like to force a decision
between STBC/BFER/SISO. In the normal scenario this decision
is done by the FW. Enable this option vis debugfs.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h |  8 +++
 drivers/net/wireless/iwlwifi/mvm/rs.c        | 84 ++++++++++++++++++++++++++++
 drivers/net/wireless/iwlwifi/mvm/rs.h        | 10 ++++
 3 files changed, 102 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h
index 4c33f27..0f1ea80 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h
@@ -330,6 +330,14 @@ enum {
 #define LQ_SS_BFER_ALLOWED_POS		2
 #define LQ_SS_BFER_ALLOWED		(1 << LQ_SS_BFER_ALLOWED_POS)
 
+/* Bit 3: Force BFER or STBC for testing
+ * If this is set:
+ * If BFER is allowed then force the ucode to choose BFER else
+ * If STBC is allowed then force the ucode to choose STBC over SISO
+ */
+#define LQ_SS_FORCE_POS			3
+#define LQ_SS_FORCE			(1 << LQ_SS_FORCE_POS)
+
 /* Bit 31: ss_params field is valid. Used for FW backward compatibility
  * with other drivers which don't support the ss_params API yet
  */
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 95b718b..194bd1f 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -39,6 +39,7 @@
 #include "sta.h"
 #include "iwl-op-mode.h"
 #include "mvm.h"
+#include "debugfs.h"
 
 #define RS_NAME "iwl-mvm-rs"
 
@@ -3057,6 +3058,20 @@ static void rs_set_lq_ss_params(struct iwl_mvm *mvm,
 	if (!iwl_mvm_bt_coex_is_mimo_allowed(mvm, sta))
 		goto out;
 
+	/* Check if forcing the decision is configured.
+	 * Note that SISO is forced by not allowing STBC or BFER
+	 */
+	if (lq_sta->ss_force == RS_SS_FORCE_STBC)
+		ss_params |= (LQ_SS_STBC_1SS_ALLOWED | LQ_SS_FORCE);
+	else if (lq_sta->ss_force == RS_SS_FORCE_BFER)
+		ss_params |= (LQ_SS_BFER_ALLOWED | LQ_SS_FORCE);
+
+	if (lq_sta->ss_force != RS_SS_FORCE_NONE) {
+		IWL_DEBUG_RATE(mvm, "Forcing single stream Tx decision %d\n",
+			       lq_sta->ss_force);
+		goto out;
+	}
+
 	if (lq_sta->stbc_capable)
 		ss_params |= LQ_SS_STBC_1SS_ALLOWED;
 
@@ -3502,9 +3517,73 @@ static const struct file_operations rs_sta_dbgfs_drv_tx_stats_ops = {
 	.llseek = default_llseek,
 };
 
+static ssize_t iwl_dbgfs_ss_force_read(struct file *file,
+				       char __user *user_buf,
+				       size_t count, loff_t *ppos)
+{
+	struct iwl_lq_sta *lq_sta = file->private_data;
+	char buf[12];
+	int bufsz = sizeof(buf);
+	int pos = 0;
+	static const char * const ss_force_name[] = {
+		[RS_SS_FORCE_NONE] = "none",
+		[RS_SS_FORCE_STBC] = "stbc",
+		[RS_SS_FORCE_BFER] = "bfer",
+		[RS_SS_FORCE_SISO] = "siso",
+	};
+
+	pos += scnprintf(buf+pos, bufsz-pos, "%s\n",
+			 ss_force_name[lq_sta->ss_force]);
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
+static ssize_t iwl_dbgfs_ss_force_write(struct iwl_lq_sta *lq_sta, char *buf,
+					size_t count, loff_t *ppos)
+{
+	struct iwl_mvm *mvm = lq_sta->pers.drv;
+	int ret = 0;
+
+	if (!strncmp("none", buf, 4)) {
+		lq_sta->ss_force = RS_SS_FORCE_NONE;
+	} else if (!strncmp("siso", buf, 4)) {
+		lq_sta->ss_force = RS_SS_FORCE_SISO;
+	} else if (!strncmp("stbc", buf, 4)) {
+		if (lq_sta->stbc_capable) {
+			lq_sta->ss_force = RS_SS_FORCE_STBC;
+		} else {
+			IWL_ERR(mvm,
+				"can't force STBC. peer doesn't support\n");
+			ret = -EINVAL;
+		}
+	} else if (!strncmp("bfer", buf, 4)) {
+		if (lq_sta->bfer_capable) {
+			lq_sta->ss_force = RS_SS_FORCE_BFER;
+		} else {
+			IWL_ERR(mvm,
+				"can't force BFER. peer doesn't support\n");
+			ret = -EINVAL;
+		}
+	} else {
+		IWL_ERR(mvm, "valid values none|siso|stbc|bfer\n");
+		ret = -EINVAL;
+	}
+	return ret ?: count;
+}
+
+#define MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz) \
+	_MVM_DEBUGFS_READ_WRITE_FILE_OPS(name, bufsz, struct iwl_lq_sta)
+#define MVM_DEBUGFS_ADD_FILE_RS(name, parent, mode) do {		\
+		if (!debugfs_create_file(#name, mode, parent, lq_sta,	\
+					 &iwl_dbgfs_##name##_ops))	\
+			goto err;					\
+	} while (0)
+
+MVM_DEBUGFS_READ_WRITE_FILE_OPS(ss_force, 32);
+
 static void rs_add_debugfs(void *mvm, void *mvm_sta, struct dentry *dir)
 {
 	struct iwl_lq_sta *lq_sta = mvm_sta;
+
 	debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir,
 			    lq_sta, &rs_sta_dbgfs_scale_table_ops);
 	debugfs_create_file("rate_stats_table", S_IRUSR, dir,
@@ -3515,6 +3594,11 @@ static void rs_add_debugfs(void *mvm, void *mvm_sta, struct dentry *dir)
 			  &lq_sta->tx_agg_tid_en);
 	debugfs_create_u8("reduced_tpc", S_IRUSR | S_IWUSR, dir,
 			  &lq_sta->pers.dbg_fixed_txp_reduction);
+
+	MVM_DEBUGFS_ADD_FILE_RS(ss_force, dir, S_IRUSR | S_IWUSR);
+	return;
+err:
+	IWL_ERR((struct iwl_mvm *)mvm, "Can't create debugfs entity\n");
 }
 
 static void rs_remove_debugfs(void *mvm, void *mvm_sta)
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.h b/drivers/net/wireless/iwlwifi/mvm/rs.h
index ba57f5a..dc4ef3d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.h
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.h
@@ -240,6 +240,13 @@ enum rs_column {
 	RS_COLUMN_INVALID,
 };
 
+enum rs_ss_force_opt {
+	RS_SS_FORCE_NONE = 0,
+	RS_SS_FORCE_STBC,
+	RS_SS_FORCE_BFER,
+	RS_SS_FORCE_SISO,
+};
+
 /* Packet stats per rate */
 struct rs_rate_stats {
 	u64 success;
@@ -324,6 +331,9 @@ struct iwl_lq_sta {
 	/* tx power reduce for this sta */
 	int tpc_reduce;
 
+	/* force STBC/BFER/SISO for testing */
+	enum rs_ss_force_opt ss_force;
+
 	/* persistent fields - initialized only once - keep last! */
 	struct lq_sta_pers {
 #ifdef CONFIG_MAC80211_DEBUGFS
-- 
cgit v1.1


From cb6bb128b73ae898d6ee0281c2b2644f70633d58 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 25 Jan 2015 10:36:31 +0200
Subject: iwlwifi: pcie: prepare the enablement of 31 TFD queues

Some devices have 31 TFD queues. Don't enable it yet since
there are still issues with it, but at least prepare the
code for it. There was a bug in the read pointer assignment,
fix that. Also, move the inline functions to iwl-scd.h which
is the right place.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/iwl-prph.h   | 26 ++------------------
 drivers/net/wireless/iwlwifi/iwl-scd.h    | 41 +++++++++++++++++++++++++------
 drivers/net/wireless/iwlwifi/pcie/trans.c |  1 +
 drivers/net/wireless/iwlwifi/pcie/tx.c    |  4 +++
 4 files changed, 40 insertions(+), 32 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index b21fcf0..6221e4d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -252,6 +252,7 @@
 #define SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK		(0x0000007F)
 #define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS	(16)
 #define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK	(0x007F0000)
+#define SCD_GP_CTRL_ENABLE_31_QUEUES		BIT(0)
 
 /* Context Data */
 #define SCD_CONTEXT_MEM_LOWER_BOUND	(SCD_MEM_LOWER_BOUND + 0x600)
@@ -285,32 +286,9 @@
 #define SCD_CHAINEXT_EN		(SCD_BASE + 0x244)
 #define SCD_AGGR_SEL		(SCD_BASE + 0x248)
 #define SCD_INTERRUPT_MASK	(SCD_BASE + 0x108)
+#define SCD_GP_CTRL		(SCD_BASE + 0x1a8)
 #define SCD_EN_CTRL		(SCD_BASE + 0x254)
 
-static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl)
-{
-	if (chnl < 20)
-		return SCD_BASE + 0x18 + chnl * 4;
-	WARN_ON_ONCE(chnl >= 32);
-	return SCD_BASE + 0x284 + (chnl - 20) * 4;
-}
-
-static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl)
-{
-	if (chnl < 20)
-		return SCD_BASE + 0x68 + chnl * 4;
-	WARN_ON_ONCE(chnl >= 32);
-	return SCD_BASE + 0x2B4 + (chnl - 20) * 4;
-}
-
-static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl)
-{
-	if (chnl < 20)
-		return SCD_BASE + 0x10c + chnl * 4;
-	WARN_ON_ONCE(chnl >= 32);
-	return SCD_BASE + 0x384 + (chnl - 20) * 4;
-}
-
 /*********************** END TX SCHEDULER *************************************/
 
 /* Oscillator clock */
diff --git a/drivers/net/wireless/iwlwifi/iwl-scd.h b/drivers/net/wireless/iwlwifi/iwl-scd.h
index 6c622b2..f2353eb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scd.h
+++ b/drivers/net/wireless/iwlwifi/iwl-scd.h
@@ -69,14 +69,6 @@
 #include "iwl-prph.h"
 
 
-static inline void iwl_scd_txq_set_inactive(struct iwl_trans *trans,
-					    u16 txq_id)
-{
-	iwl_write_prph(trans, SCD_QUEUE_STATUS_BITS(txq_id),
-		       (0 << SCD_QUEUE_STTS_REG_POS_ACTIVE)|
-		       (1 << SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
-}
-
 static inline void iwl_scd_txq_set_chain(struct iwl_trans *trans,
 					 u16 txq_id)
 {
@@ -115,4 +107,37 @@ static inline void iwl_scd_enable_set_active(struct iwl_trans *trans,
 {
 	iwl_write_prph(trans, SCD_EN_CTRL, value);
 }
+
+static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl)
+{
+	if (chnl < 20)
+		return SCD_BASE + 0x18 + chnl * 4;
+	WARN_ON_ONCE(chnl >= 32);
+	return SCD_BASE + 0x284 + (chnl - 20) * 4;
+}
+
+static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl)
+{
+	if (chnl < 20)
+		return SCD_BASE + 0x68 + chnl * 4;
+	WARN_ON_ONCE(chnl >= 32);
+	return SCD_BASE + 0x2B4 + chnl * 4;
+}
+
+static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl)
+{
+	if (chnl < 20)
+		return SCD_BASE + 0x10c + chnl * 4;
+	WARN_ON_ONCE(chnl >= 32);
+	return SCD_BASE + 0x334 + chnl * 4;
+}
+
+static inline void iwl_scd_txq_set_inactive(struct iwl_trans *trans,
+					    u16 txq_id)
+{
+	iwl_write_prph(trans, SCD_QUEUE_STATUS_BITS(txq_id),
+		       (0 << SCD_QUEUE_STTS_REG_POS_ACTIVE)|
+		       (1 << SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
+}
+
 #endif
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 1ff8767..eb0ffc1 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -75,6 +75,7 @@
 #include "iwl-trans.h"
 #include "iwl-csr.h"
 #include "iwl-prph.h"
+#include "iwl-scd.h"
 #include "iwl-agn-hw.h"
 #include "iwl-fw-error-dump.h"
 #include "internal.h"
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 6c7bfe8..0a94083 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -892,6 +892,10 @@ int iwl_pcie_tx_init(struct iwl_trans *trans)
 		}
 	}
 
+	if (trans->cfg->base_params->num_of_queues > 20)
+		iwl_set_bits_prph(trans, SCD_GP_CTRL,
+				  SCD_GP_CTRL_ENABLE_31_QUEUES);
+
 	return 0;
 error:
 	/*Upon error, free only if we allocated something */
-- 
cgit v1.1


From cd8f438405032ac8ff88bd8f2eca5e0c0063b14b Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu, 29 Jan 2015 21:34:00 +0200
Subject: iwlwifi: pcie: disable the SCD_BASE_ADDR when we resume from WoWLAN

The base address of the scheduler in the device's memory
(SRAM) comes from two different sources. The periphery
register and the alive notification from the firmware.
We have a check in iwl_pcie_tx_start that ensures that
they are the same.
When we resume from WoWLAN, the firmware may have crashed
for whatever reason. In that case, the whole device may be
reset which means that the periphery register will hold a
meaningless value. When we come to compare
trans_pcie->scd_base_addr (which really holds the value we
had when we loaded the WoWLAN firmware upon suspend) and
the current value of the register, we don't see a match
unsurprisingly.
Trick the check to avoid a loud yet harmless WARN.
Note that when the WoWLAN has crashed, we will see that
in iwl_trans_pcie_d3_resume which will let the op_mode
know. Once the op_mode is informed that the WowLAN firmware
has crashed, it can't do much besides resetting the whole
device.

CC: <stable@vger.kernel.org>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/pcie/tx.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 0a94083..59aefa4 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -716,7 +716,12 @@ void iwl_trans_pcie_tx_reset(struct iwl_trans *trans)
 	iwl_write_direct32(trans, FH_KW_MEM_ADDR_REG,
 			   trans_pcie->kw.dma >> 4);
 
-	iwl_pcie_tx_start(trans, trans_pcie->scd_base_addr);
+	/*
+	 * Send 0 as the scd_base_addr since the device may have be reset
+	 * while we were in WoWLAN in which case SCD_SRAM_BASE_ADDR will
+	 * contain garbage.
+	 */
+	iwl_pcie_tx_start(trans, 0);
 }
 
 /*
-- 
cgit v1.1


From 5cb1270143668fa72007b52a8be6b4aa2c182809 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 22 Jan 2015 12:19:26 +0200
Subject: iwlwifi: mvm: improve TDLS ch-sw state machine

Add a response-received state and add more limits on allowed requests
in each state of the connection. Previously ch-switch requests from
other peers could interrupt an outgoing active ch-switch. Also stale
packets from the current peer could disrupt the channel switch state.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mvm.h  |  1 +
 drivers/net/wireless/iwlwifi/mvm/tdls.c | 48 +++++++++++++++++++++++----------
 2 files changed, 35 insertions(+), 14 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 7773ffc..fc80b7b 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -532,6 +532,7 @@ enum {
 enum iwl_mvm_tdls_cs_state {
 	IWL_MVM_TDLS_SW_IDLE = 0,
 	IWL_MVM_TDLS_SW_REQ_SENT,
+	IWL_MVM_TDLS_SW_RESP_RCVD,
 	IWL_MVM_TDLS_SW_REQ_RCVD,
 	IWL_MVM_TDLS_SW_ACTIVE,
 };
diff --git a/drivers/net/wireless/iwlwifi/mvm/tdls.c b/drivers/net/wireless/iwlwifi/mvm/tdls.c
index c0e00ba..ea1831c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tdls.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tdls.c
@@ -228,6 +228,8 @@ iwl_mvm_tdls_cs_state_str(enum iwl_mvm_tdls_cs_state state)
 		return "IDLE";
 	case IWL_MVM_TDLS_SW_REQ_SENT:
 		return "REQ SENT";
+	case IWL_MVM_TDLS_SW_RESP_RCVD:
+		return "RESP RECEIVED";
 	case IWL_MVM_TDLS_SW_REQ_RCVD:
 		return "REQ RECEIVED";
 	case IWL_MVM_TDLS_SW_ACTIVE:
@@ -325,17 +327,27 @@ iwl_mvm_tdls_check_action(struct iwl_mvm *mvm,
 			ret = -EINVAL;
 		break;
 	case IWL_MVM_TDLS_SW_REQ_SENT:
+		/* only allow requests from the same peer */
+		if (!same_peer)
+			ret = -EBUSY;
+		else if (type == TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH &&
+			 !peer_initiator)
+			/*
+			 * We received a ch-switch request while an outgoing
+			 * one is pending. Allow it if the peer is the link
+			 * initiator.
+			 */
+			ret = -EBUSY;
+		else if (type == TDLS_SEND_CHAN_SW_REQ)
+			/* wait for idle before sending another request */
+			ret = -EBUSY;
+		break;
+	case IWL_MVM_TDLS_SW_RESP_RCVD:
 		/*
-		 * We received a ch-switch request while an outgoing one is
-		 * pending. Allow it to proceed if the other peer is the same
-		 * one we sent to, and we are not the link initiator.
+		 * we are waiting for the FW to give an "active" notification,
+		 * so ignore requests in the meantime
 		 */
-		if (type == TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH) {
-			if (!same_peer)
-				ret = -EBUSY;
-			else if (!peer_initiator) /* we are the initiator */
-				ret = -EBUSY;
-		}
+		ret = -EBUSY;
 		break;
 	case IWL_MVM_TDLS_SW_REQ_RCVD:
 		/* as above, allow the link initiator to proceed */
@@ -349,9 +361,12 @@ iwl_mvm_tdls_check_action(struct iwl_mvm *mvm,
 		}
 		break;
 	case IWL_MVM_TDLS_SW_ACTIVE:
-		/* we don't allow initiations during active channel switch */
-		if (type == TDLS_SEND_CHAN_SW_REQ)
-			ret = -EINVAL;
+		/*
+		 * the only valid request when active is a request to return
+		 * to the base channel by the current off-channel peer
+		 */
+		if (type != TDLS_MOVE_CH || !same_peer)
+			ret = -EBUSY;
 		break;
 	}
 
@@ -473,6 +488,8 @@ iwl_mvm_tdls_config_channel_switch(struct iwl_mvm *mvm,
 					     type == TDLS_SEND_CHAN_SW_REQ ?
 					     IWL_MVM_TDLS_SW_REQ_SENT :
 					     IWL_MVM_TDLS_SW_REQ_RCVD);
+	} else {
+		iwl_mvm_tdls_update_cs_state(mvm, IWL_MVM_TDLS_SW_RESP_RCVD);
 	}
 
 out:
@@ -657,12 +674,15 @@ iwl_mvm_tdls_recv_channel_switch(struct ieee80211_hw *hw,
 	struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw);
 	enum iwl_tdls_channel_switch_type type;
 	unsigned int delay;
+	const char *action_str =
+		params->action_code == WLAN_TDLS_CHANNEL_SWITCH_REQUEST ?
+		"REQ" : "RESP";
 
 	mutex_lock(&mvm->mutex);
 
 	IWL_DEBUG_TDLS(mvm,
-		       "Received TDLS ch switch action %d from %pM status %d\n",
-		       params->action_code, params->sta->addr, params->status);
+		       "Received TDLS ch switch action %s from %pM status %d\n",
+		       action_str, params->sta->addr, params->status);
 
 	/*
 	 * we got a non-zero status from a peer we were switching to - move to
-- 
cgit v1.1


From b9dccdb33c4dc86922d025d02e91715ad9510732 Mon Sep 17 00:00:00 2001
From: Arik Nemtsov <arik@wizery.com>
Date: Thu, 22 Jan 2015 14:24:44 +0200
Subject: iwlwifi: mvm: ignore stale TDLS ch-switch responses

During out-of-channel activities (e.g. scan) TDLS ch-switch responses from
a peer are kept in FW. These packets arrive only after the out-of-channel
activity is complete, which can be in the order of several seconds.

Since TDLS ch-sw has no dialog-token-like mechanism for distinguishing
sessions, use the GP2 time of the incoming ch-switch response to discern
validity. For this purpose record the GP2 time of an outgoing TDLS ch-sw
request and compare to the Rx time of the ch-sw response.
The methods works in practice since the GP2 time of FW-deferred Rx is
accurate and contains the real Rx timestamp.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mvm.h  |  3 +++
 drivers/net/wireless/iwlwifi/mvm/tdls.c | 15 +++++++++++++--
 2 files changed, 16 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index fc80b7b..ed09726 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -798,6 +798,9 @@ struct iwl_mvm {
 			struct cfg80211_chan_def chandef;
 			struct sk_buff *skb; /* ch sw template */
 			u32 ch_sw_tm_ie;
+
+			/* timestamp of last ch-sw request sent (GP2 time) */
+			u32 sent_timestamp;
 		} peer;
 	} tdls_cs;
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/tdls.c b/drivers/net/wireless/iwlwifi/mvm/tdls.c
index ea1831c..a87b506 100644
--- a/drivers/net/wireless/iwlwifi/mvm/tdls.c
+++ b/drivers/net/wireless/iwlwifi/mvm/tdls.c
@@ -64,6 +64,8 @@
 #include <linux/etherdevice.h>
 #include "mvm.h"
 #include "time-event.h"
+#include "iwl-io.h"
+#include "iwl-prph.h"
 
 #define TU_TO_US(x) (x * 1024)
 #define TU_TO_MS(x) (TU_TO_US(x) / 1000)
@@ -250,6 +252,11 @@ static void iwl_mvm_tdls_update_cs_state(struct iwl_mvm *mvm,
 		       iwl_mvm_tdls_cs_state_str(state));
 	mvm->tdls_cs.state = state;
 
+	/* we only send requests to our switching peer - update sent time */
+	if (state == IWL_MVM_TDLS_SW_REQ_SENT)
+		mvm->tdls_cs.peer.sent_timestamp =
+			iwl_read_prph(mvm->trans, DEVICE_SYSTEM_TIME_REG);
+
 	if (state == IWL_MVM_TDLS_SW_IDLE)
 		mvm->tdls_cs.cur_sta_id = IWL_MVM_STATION_COUNT;
 }
@@ -302,7 +309,7 @@ out:
 static int
 iwl_mvm_tdls_check_action(struct iwl_mvm *mvm,
 			  enum iwl_tdls_channel_switch_type type,
-			  const u8 *peer, bool peer_initiator)
+			  const u8 *peer, bool peer_initiator, u32 timestamp)
 {
 	bool same_peer = false;
 	int ret = 0;
@@ -341,6 +348,9 @@ iwl_mvm_tdls_check_action(struct iwl_mvm *mvm,
 		else if (type == TDLS_SEND_CHAN_SW_REQ)
 			/* wait for idle before sending another request */
 			ret = -EBUSY;
+		else if (timestamp <= mvm->tdls_cs.peer.sent_timestamp)
+			/* we got a stale response - ignore it */
+			ret = -EINVAL;
 		break;
 	case IWL_MVM_TDLS_SW_RESP_RCVD:
 		/*
@@ -399,7 +409,8 @@ iwl_mvm_tdls_config_channel_switch(struct iwl_mvm *mvm,
 
 	lockdep_assert_held(&mvm->mutex);
 
-	ret = iwl_mvm_tdls_check_action(mvm, type, peer, peer_initiator);
+	ret = iwl_mvm_tdls_check_action(mvm, type, peer, peer_initiator,
+					timestamp);
 	if (ret)
 		return ret;
 
-- 
cgit v1.1


From ce71c2f7976881f39fcf14f28bd7633612acd0ef Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun, 11 Jan 2015 17:19:39 +0200
Subject: iwlwifi: mvm: enable watchdog on Tx queues for mvm

This watchdog allows to monitor the transmit queues. When a
queue doesn't progress for a too long time, a timer fires
and then, debug data can be collected.
This watchdog has never been enabled on dvm controlled
devices, so don't enable it there.
In order to have it running on mvm controlled devices, we
need to fix a small issue in the transport layer: mvm
controlled devices use the shadow registers optimization.
In this case, the watchdog wasn't running at all, even if
enabled by the module parameter. Fix that on the way.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/main.c      | 6 +-----
 drivers/net/wireless/iwlwifi/iwl-drv.c       | 5 -----
 drivers/net/wireless/iwlwifi/iwl-modparams.h | 2 --
 drivers/net/wireless/iwlwifi/mvm/mvm.h       | 2 ++
 drivers/net/wireless/iwlwifi/mvm/ops.c       | 9 ++++++---
 drivers/net/wireless/iwlwifi/pcie/tx.c       | 2 +-
 6 files changed, 10 insertions(+), 16 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index de43dd7..a21400c 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -1228,11 +1228,7 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	trans_cfg.no_reclaim_cmds = no_reclaim_cmds;
 	trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds);
 	trans_cfg.rx_buf_size_8k = iwlwifi_mod_params.amsdu_size_8K;
-	if (!iwlwifi_mod_params.wd_disable)
-		trans_cfg.queue_watchdog_timeout =
-			priv->cfg->base_params->wd_timeout;
-	else
-		trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED;
+	trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED;
 	trans_cfg.command_names = iwl_dvm_cmd_strings;
 	trans_cfg.cmd_fifo = IWLAGN_CMD_FIFO_NUM;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-drv.c b/drivers/net/wireless/iwlwifi/iwl-drv.c
index e7c0df6..996e7f1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/iwlwifi/iwl-drv.c
@@ -1367,7 +1367,6 @@ struct iwl_mod_params iwlwifi_mod_params = {
 	.restart_fw = true,
 	.bt_coex_active = true,
 	.power_level = IWL_POWER_INDEX_1,
-	.wd_disable = true,
 	.d0i3_disable = true,
 #ifndef CONFIG_IWLWIFI_UAPSD
 	.uapsd_disable = true,
@@ -1478,10 +1477,6 @@ module_param_named(antenna_coupling, iwlwifi_mod_params.ant_coupling,
 MODULE_PARM_DESC(antenna_coupling,
 		 "specify antenna coupling in dB (default: 0 dB)");
 
-module_param_named(wd_disable, iwlwifi_mod_params.wd_disable, int, S_IRUGO);
-MODULE_PARM_DESC(wd_disable,
-		"Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1)");
-
 module_param_named(nvm_file, iwlwifi_mod_params.nvm_file, charp, S_IRUGO);
 MODULE_PARM_DESC(nvm_file, "NVM file name");
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-modparams.h b/drivers/net/wireless/iwlwifi/iwl-modparams.h
index 2a8cf4b..e8eabd2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-modparams.h
+++ b/drivers/net/wireless/iwlwifi/iwl-modparams.h
@@ -96,7 +96,6 @@ enum iwl_disable_11n {
  *	use IWL_[DIS,EN]ABLE_HT_* constants
  * @amsdu_size_8K: enable 8K amsdu size, default = 0
  * @restart_fw: restart firmware, default = 1
- * @wd_disable: disable stuck queue check, default = 1
  * @bt_coex_active: enable bt coex, default = true
  * @led_mode: system default, default = 0
  * @power_save: enable power save, default = false
@@ -111,7 +110,6 @@ struct iwl_mod_params {
 	unsigned int disable_11n;
 	int amsdu_size_8K;
 	bool restart_fw;
-	int  wd_disable;
 	bool bt_coex_active;
 	int led_mode;
 	bool power_save;
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index ed09726..4a7620c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -119,11 +119,13 @@ extern const struct ieee80211_ops iwl_mvm_hw_ops;
  *	We will register to mac80211 to have testmode working. The NIC must not
  *	be up'ed after the INIT fw asserted. This is useful to be able to use
  *	proprietary tools over testmode to debug the INIT fw.
+ * @tfd_q_hang_detect: enabled the detection of hung transmit queues
  * @power_scheme: CAM(Continuous Active Mode)-1, BPS(Balanced Power
  *	Save)-2(default), LP(Low Power)-3
  */
 struct iwl_mvm_mod_params {
 	bool init_dbg;
+	bool tfd_q_hang_detect;
 	int power_scheme;
 };
 extern struct iwl_mvm_mod_params iwlmvm_mod_params;
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index b1dea68..f801824 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -93,6 +93,7 @@ static const struct iwl_op_mode_ops iwl_mvm_ops;
 
 struct iwl_mvm_mod_params iwlmvm_mod_params = {
 	.power_scheme = IWL_POWER_SCHEME_BPS,
+	.tfd_q_hang_detect = true
 	/* rest of fields are 0 by default */
 };
 
@@ -102,6 +103,10 @@ MODULE_PARM_DESC(init_dbg,
 module_param_named(power_scheme, iwlmvm_mod_params.power_scheme, int, S_IRUGO);
 MODULE_PARM_DESC(power_scheme,
 		 "power management scheme: 1-active, 2-balanced, 3-low power, default: 2");
+module_param_named(tfd_q_hang_detect, iwlmvm_mod_params.tfd_q_hang_detect,
+		   bool, S_IRUGO);
+MODULE_PARM_DESC(tfd_q_hang_detect,
+		 "TFD queues hang detection (default: true");
 
 /*
  * module init and exit functions
@@ -473,10 +478,8 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_DW_BC_TABLE)
 		trans_cfg.bc_table_dword = true;
 
-	if (!iwlwifi_mod_params.wd_disable)
+	if (iwlmvm_mod_params.tfd_q_hang_detect)
 		trans_cfg.queue_watchdog_timeout = cfg->base_params->wd_timeout;
-	else
-		trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED;
 
 	trans_cfg.command_names = iwl_mvm_cmd_strings;
 
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index 59aefa4..bb9dd3e 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -1849,7 +1849,7 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
 
 	/* start timer if queue currently empty */
 	if (q->read_ptr == q->write_ptr) {
-		if (txq->need_update && trans_pcie->wd_timeout)
+		if (trans_pcie->wd_timeout)
 			mod_timer(&txq->stuck_timer,
 				  jiffies + trans_pcie->wd_timeout);
 		IWL_DEBUG_RPM(trans, "Q: %d first tx - take ref\n", q->id);
-- 
cgit v1.1


From 4cf677fd547d7671835d799e4d377b949510c642 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 12 Jan 2015 14:38:29 +0200
Subject: iwlwifi: allow to define the stuck queue timer per queue

Different queue can have different behavior. While it can be
unacceptable for a certain queue to be stuck for 2 seconds
(e.g. the command queue), it can happen that another queue
will stay stuck for even longer (a queue servicing a power
saving client in GO).
The op_mode can even make the timeout be a function of the
listen interval.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/dvm/main.c      |  3 +-
 drivers/net/wireless/iwlwifi/dvm/tx.c        |  2 +-
 drivers/net/wireless/iwlwifi/dvm/ucode.c     |  2 +-
 drivers/net/wireless/iwlwifi/iwl-config.h    |  2 +-
 drivers/net/wireless/iwlwifi/iwl-trans.h     | 29 +++++++++++---------
 drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c  | 10 +++++--
 drivers/net/wireless/iwlwifi/mvm/mvm.h       | 15 ++++++----
 drivers/net/wireless/iwlwifi/mvm/ops.c       |  8 ++++--
 drivers/net/wireless/iwlwifi/mvm/sta.c       | 15 ++++++++--
 drivers/net/wireless/iwlwifi/mvm/utils.c     |  8 ++++--
 drivers/net/wireless/iwlwifi/pcie/internal.h | 10 +++----
 drivers/net/wireless/iwlwifi/pcie/trans.c    |  4 +--
 drivers/net/wireless/iwlwifi/pcie/tx.c       | 41 +++++++++++++++-------------
 13 files changed, 87 insertions(+), 62 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c
index a21400c..c4d6dd7 100644
--- a/drivers/net/wireless/iwlwifi/dvm/main.c
+++ b/drivers/net/wireless/iwlwifi/dvm/main.c
@@ -1228,7 +1228,8 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	trans_cfg.no_reclaim_cmds = no_reclaim_cmds;
 	trans_cfg.n_no_reclaim_cmds = ARRAY_SIZE(no_reclaim_cmds);
 	trans_cfg.rx_buf_size_8k = iwlwifi_mod_params.amsdu_size_8K;
-	trans_cfg.queue_watchdog_timeout = IWL_WATCHDOG_DISABLED;
+	trans_cfg.cmd_q_wdg_timeout = IWL_WATCHDOG_DISABLED;
+
 	trans_cfg.command_names = iwl_dvm_cmd_strings;
 	trans_cfg.cmd_fifo = IWLAGN_CMD_FIFO_NUM;
 
diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c
index d1ce3ce..1e40a12 100644
--- a/drivers/net/wireless/iwlwifi/dvm/tx.c
+++ b/drivers/net/wireless/iwlwifi/dvm/tx.c
@@ -715,7 +715,7 @@ int iwlagn_tx_agg_oper(struct iwl_priv *priv, struct ieee80211_vif *vif,
 	fifo = ctx->ac_to_fifo[tid_to_ac[tid]];
 
 	iwl_trans_txq_enable(priv->trans, q, fifo, sta_priv->sta_id, tid,
-			     buf_size, ssn);
+			     buf_size, ssn, 0);
 
 	/*
 	 * If the limit is 0, then it wasn't initialised yet,
diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c
index d5cee15..4dbef7e 100644
--- a/drivers/net/wireless/iwlwifi/dvm/ucode.c
+++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c
@@ -267,7 +267,7 @@ static int iwl_alive_notify(struct iwl_priv *priv)
 	for (i = 0; i < n_queues; i++)
 		if (queue_to_txf[i] != IWL_TX_FIFO_UNUSED)
 			iwl_trans_ac_txq_enable(priv->trans, i,
-						queue_to_txf[i]);
+						queue_to_txf[i], 0);
 
 	priv->passive_no_rx = false;
 	priv->transport_queue_stop = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h
index 445bff6..4b190d9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-config.h
+++ b/drivers/net/wireless/iwlwifi/iwl-config.h
@@ -126,7 +126,7 @@ enum iwl_led_mode {
 
 /* TX queue watchdog timeouts in mSecs */
 #define IWL_WATCHDOG_DISABLED	0
-#define IWL_DEF_WD_TIMEOUT	2000
+#define IWL_DEF_WD_TIMEOUT	2500
 #define IWL_LONG_WD_TIMEOUT	10000
 #define IWL_MAX_WD_TIMEOUT	120000
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h
index 84d8477..a96bd8d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/iwlwifi/iwl-trans.h
@@ -368,6 +368,7 @@ enum iwl_trans_status {
  * @cmd_queue: the index of the command queue.
  *	Must be set before start_fw.
  * @cmd_fifo: the fifo for host commands
+ * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue.
  * @no_reclaim_cmds: Some devices erroneously don't set the
  *	SEQ_RX_FRAME bit on some notifications, this is the
  *	list of such notifications to filter. Max length is
@@ -378,8 +379,6 @@ enum iwl_trans_status {
  * @bc_table_dword: set to true if the BC table expects the byte count to be
  *	in DWORD (as opposed to bytes)
  * @scd_set_active: should the transport configure the SCD for HCMD queue
- * @queue_watchdog_timeout: time (in ms) after which queues
- *	are considered stuck and will trigger device restart
  * @command_names: array of command names, must be 256 entries
  *	(one for each command); for debugging only
  * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until
@@ -390,13 +389,13 @@ struct iwl_trans_config {
 
 	u8 cmd_queue;
 	u8 cmd_fifo;
+	unsigned int cmd_q_wdg_timeout;
 	const u8 *no_reclaim_cmds;
 	unsigned int n_no_reclaim_cmds;
 
 	bool rx_buf_size_8k;
 	bool bc_table_dword;
 	bool scd_set_active;
-	unsigned int queue_watchdog_timeout;
 	const char *const *command_names;
 
 	u32 sdio_adma_addr;
@@ -511,7 +510,8 @@ struct iwl_trans_ops {
 			struct sk_buff_head *skbs);
 
 	void (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn,
-			   const struct iwl_trans_txq_scd_cfg *cfg);
+			   const struct iwl_trans_txq_scd_cfg *cfg,
+			   unsigned int queue_wdg_timeout);
 	void (*txq_disable)(struct iwl_trans *trans, int queue,
 			    bool configure_scd);
 
@@ -829,19 +829,21 @@ static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue,
 
 static inline void
 iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn,
-			 const struct iwl_trans_txq_scd_cfg *cfg)
+			 const struct iwl_trans_txq_scd_cfg *cfg,
+			 unsigned int queue_wdg_timeout)
 {
 	might_sleep();
 
 	if (unlikely((trans->state != IWL_TRANS_FW_ALIVE)))
 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
 
-	trans->ops->txq_enable(trans, queue, ssn, cfg);
+	trans->ops->txq_enable(trans, queue, ssn, cfg, queue_wdg_timeout);
 }
 
 static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
 					int fifo, int sta_id, int tid,
-					int frame_limit, u16 ssn)
+					int frame_limit, u16 ssn,
+					unsigned int queue_wdg_timeout)
 {
 	struct iwl_trans_txq_scd_cfg cfg = {
 		.fifo = fifo,
@@ -851,11 +853,12 @@ static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
 		.aggregate = sta_id >= 0,
 	};
 
-	iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg);
+	iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout);
 }
 
-static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue,
-					   int fifo)
+static inline
+void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo,
+			     unsigned int queue_wdg_timeout)
 {
 	struct iwl_trans_txq_scd_cfg cfg = {
 		.fifo = fifo,
@@ -865,16 +868,16 @@ static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue,
 		.aggregate = false,
 	};
 
-	iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg);
+	iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout);
 }
 
 static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans,
-						u32 txq_bm)
+						u32 txqs)
 {
 	if (unlikely(trans->state != IWL_TRANS_FW_ALIVE))
 		IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
 
-	return trans->ops->wait_tx_queue_empty(trans, txq_bm);
+	return trans->ops->wait_tx_queue_empty(trans, txqs);
 }
 
 static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans,
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
index 8bf78fa..7bdc622 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c
@@ -462,6 +462,9 @@ exit_fail:
 
 int iwl_mvm_mac_ctxt_init(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 {
+	unsigned int wdg_timeout = iwlmvm_mod_params.tfd_q_hang_detect ?
+					mvm->cfg->base_params->wd_timeout :
+					IWL_WATCHDOG_DISABLED;
 	u32 ac;
 	int ret;
 
@@ -474,16 +477,17 @@ int iwl_mvm_mac_ctxt_init(struct iwl_mvm *mvm, struct ieee80211_vif *vif)
 	switch (vif->type) {
 	case NL80211_IFTYPE_P2P_DEVICE:
 		iwl_mvm_enable_ac_txq(mvm, IWL_MVM_OFFCHANNEL_QUEUE,
-				      IWL_MVM_TX_FIFO_VO);
+				      IWL_MVM_TX_FIFO_VO, wdg_timeout);
 		break;
 	case NL80211_IFTYPE_AP:
 		iwl_mvm_enable_ac_txq(mvm, vif->cab_queue,
-				      IWL_MVM_TX_FIFO_MCAST);
+				      IWL_MVM_TX_FIFO_MCAST, wdg_timeout);
 		/* fall through */
 	default:
 		for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
 			iwl_mvm_enable_ac_txq(mvm, vif->hw_queue[ac],
-					      iwl_mvm_ac_to_tx_fifo[ac]);
+					      iwl_mvm_ac_to_tx_fifo[ac],
+					      wdg_timeout);
 		break;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index 4a7620c..6c69d05 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -1318,11 +1318,13 @@ static inline bool iwl_mvm_vif_low_latency(struct iwl_mvm_vif *mvmvif)
 
 /* hw scheduler queue config */
 void iwl_mvm_enable_txq(struct iwl_mvm *mvm, int queue, u16 ssn,
-			const struct iwl_trans_txq_scd_cfg *cfg);
+			const struct iwl_trans_txq_scd_cfg *cfg,
+			unsigned int wdg_timeout);
 void iwl_mvm_disable_txq(struct iwl_mvm *mvm, int queue, u8 flags);
 
-static inline void iwl_mvm_enable_ac_txq(struct iwl_mvm *mvm, int queue,
-					 u8 fifo)
+static inline
+void iwl_mvm_enable_ac_txq(struct iwl_mvm *mvm, int queue,
+			   u8 fifo, unsigned int wdg_timeout)
 {
 	struct iwl_trans_txq_scd_cfg cfg = {
 		.fifo = fifo,
@@ -1331,12 +1333,13 @@ static inline void iwl_mvm_enable_ac_txq(struct iwl_mvm *mvm, int queue,
 		.frame_limit = IWL_FRAME_LIMIT,
 	};
 
-	iwl_mvm_enable_txq(mvm, queue, 0, &cfg);
+	iwl_mvm_enable_txq(mvm, queue, 0, &cfg, wdg_timeout);
 }
 
 static inline void iwl_mvm_enable_agg_txq(struct iwl_mvm *mvm, int queue,
 					  int fifo, int sta_id, int tid,
-					  int frame_limit, u16 ssn)
+					  int frame_limit, u16 ssn,
+					  unsigned int wdg_timeout)
 {
 	struct iwl_trans_txq_scd_cfg cfg = {
 		.fifo = fifo,
@@ -1346,7 +1349,7 @@ static inline void iwl_mvm_enable_agg_txq(struct iwl_mvm *mvm, int queue,
 		.aggregate = true,
 	};
 
-	iwl_mvm_enable_txq(mvm, queue, ssn, &cfg);
+	iwl_mvm_enable_txq(mvm, queue, ssn, &cfg, wdg_timeout);
 }
 
 /* Assoc status */
diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index f801824..b6181ef 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -478,9 +478,6 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_DW_BC_TABLE)
 		trans_cfg.bc_table_dword = true;
 
-	if (iwlmvm_mod_params.tfd_q_hang_detect)
-		trans_cfg.queue_watchdog_timeout = cfg->base_params->wd_timeout;
-
 	trans_cfg.command_names = iwl_mvm_cmd_strings;
 
 	trans_cfg.cmd_queue = IWL_MVM_CMD_QUEUE;
@@ -489,6 +486,11 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 
 	trans_cfg.sdio_adma_addr = fw->sdio_adma_addr;
 
+	/* Set a short watchdog for the command queue */
+	trans_cfg.cmd_q_wdg_timeout =
+		iwlmvm_mod_params.tfd_q_hang_detect ? IWL_DEF_WD_TIMEOUT :
+						      IWL_WATCHDOG_DISABLED;
+
 	snprintf(mvm->hw->wiphy->fw_version,
 		 sizeof(mvm->hw->wiphy->fw_version),
 		 "%s", fw->fw_version);
diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c
index 14a8484..5c23cdd 100644
--- a/drivers/net/wireless/iwlwifi/mvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/mvm/sta.c
@@ -209,6 +209,9 @@ static int iwl_mvm_tdls_sta_init(struct iwl_mvm *mvm,
 {
 	unsigned long used_hw_queues;
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+	unsigned int wdg_timeout = iwlmvm_mod_params.tfd_q_hang_detect ?
+					mvm->cfg->base_params->wd_timeout :
+					IWL_WATCHDOG_DISABLED;
 	u32 ac;
 
 	lockdep_assert_held(&mvm->mutex);
@@ -232,7 +235,7 @@ static int iwl_mvm_tdls_sta_init(struct iwl_mvm *mvm,
 	/* Found a place for all queues - enable them */
 	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
 		iwl_mvm_enable_ac_txq(mvm, mvmsta->hw_queue[ac],
-				      iwl_mvm_ac_to_tx_fifo[ac]);
+				      iwl_mvm_ac_to_tx_fifo[ac], wdg_timeout);
 		mvmsta->tfd_queue_msk |= BIT(mvmsta->hw_queue[ac]);
 	}
 
@@ -626,13 +629,16 @@ static int iwl_mvm_add_int_sta_common(struct iwl_mvm *mvm,
 
 int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm)
 {
+	unsigned int wdg_timeout = iwlmvm_mod_params.tfd_q_hang_detect ?
+					mvm->cfg->base_params->wd_timeout :
+					IWL_WATCHDOG_DISABLED;
 	int ret;
 
 	lockdep_assert_held(&mvm->mutex);
 
 	/* Map Aux queue to fifo - needs to happen before adding Aux station */
 	iwl_mvm_enable_ac_txq(mvm, mvm->aux_queue,
-			      IWL_MVM_TX_FIFO_MCAST);
+			      IWL_MVM_TX_FIFO_MCAST, wdg_timeout);
 
 	/* Allocate aux station and assign to it the aux queue */
 	ret = iwl_mvm_allocate_int_sta(mvm, &mvm->aux_sta, BIT(mvm->aux_queue),
@@ -965,6 +971,9 @@ int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 {
 	struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
 	struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid];
+	unsigned int wdg_timeout = iwlmvm_mod_params.tfd_q_hang_detect ?
+					mvm->cfg->base_params->wd_timeout :
+					IWL_WATCHDOG_DISABLED;
 	int queue, fifo, ret;
 	u16 ssn;
 
@@ -988,7 +997,7 @@ int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 		return -EIO;
 
 	iwl_mvm_enable_agg_txq(mvm, queue, fifo, mvmsta->sta_id, tid,
-			       buf_size, ssn);
+			       buf_size, ssn, wdg_timeout);
 
 	/*
 	 * Even though in theory the peer could have different
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index 02f434d..8decf99 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -531,7 +531,8 @@ void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm)
 }
 
 void iwl_mvm_enable_txq(struct iwl_mvm *mvm, int queue, u16 ssn,
-			const struct iwl_trans_txq_scd_cfg *cfg)
+			const struct iwl_trans_txq_scd_cfg *cfg,
+			unsigned int wdg_timeout)
 {
 	struct iwl_scd_txq_cfg_cmd cmd = {
 		.scd_queue = queue,
@@ -545,11 +546,12 @@ void iwl_mvm_enable_txq(struct iwl_mvm *mvm, int queue, u16 ssn,
 	};
 
 	if (!iwl_mvm_is_scd_cfg_supported(mvm)) {
-		iwl_trans_txq_enable_cfg(mvm->trans, queue, ssn, cfg);
+		iwl_trans_txq_enable_cfg(mvm->trans, queue, ssn, cfg,
+					 wdg_timeout);
 		return;
 	}
 
-	iwl_trans_txq_enable_cfg(mvm->trans, queue, ssn, NULL);
+	iwl_trans_txq_enable_cfg(mvm->trans, queue, ssn, NULL, wdg_timeout);
 	WARN(iwl_mvm_send_cmd_pdu(mvm, SCD_QUEUE_CFG, 0, sizeof(cmd), &cmd),
 	     "Failed to configure queue %d on FIFO %d\n", queue, cfg->fifo);
 }
diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h
index e5652d8..cae0eb8 100644
--- a/drivers/net/wireless/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/iwlwifi/pcie/internal.h
@@ -216,6 +216,7 @@ struct iwl_pcie_txq_scratch_buf {
  * @need_update: indicates need to update read/write index
  * @active: stores if queue is active
  * @ampdu: true if this queue is an ampdu queue for an specific RA/TID
+ * @wd_timeout: queue watchdog timeout (jiffies) - per queue
  *
  * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
  * descriptors) and required locking structures.
@@ -232,6 +233,7 @@ struct iwl_txq {
 	bool need_update;
 	u8 active;
 	bool ampdu;
+	unsigned long wd_timeout;
 };
 
 static inline dma_addr_t
@@ -259,7 +261,6 @@ iwl_pcie_get_scratchbuf_dma(struct iwl_txq *txq, int idx)
  * @bc_table_dword: true if the BC table expects DWORD (as opposed to bytes)
  * @scd_set_active: should the transport configure the SCD for HCMD queue
  * @rx_page_order: page order for receive buffer size
- * @wd_timeout: queue watchdog timeout (jiffies)
  * @reg_lock: protect hw register access
  * @cmd_in_flight: true when we have a host command in flight
  * @fw_mon_phys: physical address of the buffer for the firmware monitor
@@ -302,6 +303,7 @@ struct iwl_trans_pcie {
 
 	u8 cmd_queue;
 	u8 cmd_fifo;
+	unsigned int cmd_q_wdg_timeout;
 	u8 n_no_reclaim_cmds;
 	u8 no_reclaim_cmds[MAX_NO_RECLAIM_CMDS];
 
@@ -312,9 +314,6 @@ struct iwl_trans_pcie {
 
 	const char *const *command_names;
 
-	/* queue watchdog */
-	unsigned long wd_timeout;
-
 	/*protect hw register */
 	spinlock_t reg_lock;
 	bool cmd_in_flight;
@@ -373,7 +372,8 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr);
 int iwl_pcie_tx_stop(struct iwl_trans *trans);
 void iwl_pcie_tx_free(struct iwl_trans *trans);
 void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int queue, u16 ssn,
-			       const struct iwl_trans_txq_scd_cfg *cfg);
+			       const struct iwl_trans_txq_scd_cfg *cfg,
+			       unsigned int wdg_timeout);
 void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int queue,
 				bool configure_scd);
 int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index eb0ffc1..69935aa 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1269,6 +1269,7 @@ static void iwl_trans_pcie_configure(struct iwl_trans *trans,
 
 	trans_pcie->cmd_queue = trans_cfg->cmd_queue;
 	trans_pcie->cmd_fifo = trans_cfg->cmd_fifo;
+	trans_pcie->cmd_q_wdg_timeout = trans_cfg->cmd_q_wdg_timeout;
 	if (WARN_ON(trans_cfg->n_no_reclaim_cmds > MAX_NO_RECLAIM_CMDS))
 		trans_pcie->n_no_reclaim_cmds = 0;
 	else
@@ -1283,9 +1284,6 @@ static void iwl_trans_pcie_configure(struct iwl_trans *trans,
 	else
 		trans_pcie->rx_page_order = get_order(4 * 1024);
 
-	trans_pcie->wd_timeout =
-		msecs_to_jiffies(trans_cfg->queue_watchdog_timeout);
-
 	trans_pcie->command_names = trans_cfg->command_names;
 	trans_pcie->bc_table_dword = trans_cfg->bc_table_dword;
 	trans_pcie->scd_set_active = trans_cfg->scd_set_active;
diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c
index bb9dd3e..af0bce7 100644
--- a/drivers/net/wireless/iwlwifi/pcie/tx.c
+++ b/drivers/net/wireless/iwlwifi/pcie/tx.c
@@ -163,7 +163,7 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data)
 	spin_unlock(&txq->lock);
 
 	IWL_ERR(trans, "Queue %d stuck for %u ms.\n", txq->q.id,
-		jiffies_to_msecs(trans_pcie->wd_timeout));
+		jiffies_to_msecs(txq->wd_timeout));
 	IWL_ERR(trans, "Current SW read_ptr %d write_ptr %d\n",
 		txq->q.read_ptr, txq->q.write_ptr);
 
@@ -674,7 +674,8 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr)
 		iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
 
 	iwl_trans_ac_txq_enable(trans, trans_pcie->cmd_queue,
-				trans_pcie->cmd_fifo);
+				trans_pcie->cmd_fifo,
+				trans_pcie->cmd_q_wdg_timeout);
 
 	/* Activate all Tx DMA/FIFO channels */
 	iwl_scd_activate_fifos(trans);
@@ -909,10 +910,9 @@ error:
 	return ret;
 }
 
-static inline void iwl_pcie_txq_progress(struct iwl_trans_pcie *trans_pcie,
-					   struct iwl_txq *txq)
+static inline void iwl_pcie_txq_progress(struct iwl_txq *txq)
 {
-	if (!trans_pcie->wd_timeout)
+	if (!txq->wd_timeout)
 		return;
 
 	/*
@@ -922,7 +922,7 @@ static inline void iwl_pcie_txq_progress(struct iwl_trans_pcie *trans_pcie,
 	if (txq->q.read_ptr == txq->q.write_ptr)
 		del_timer(&txq->stuck_timer);
 	else
-		mod_timer(&txq->stuck_timer, jiffies + trans_pcie->wd_timeout);
+		mod_timer(&txq->stuck_timer, jiffies + txq->wd_timeout);
 }
 
 /* Frees buffers until index _not_ inclusive */
@@ -984,7 +984,7 @@ void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn,
 		iwl_pcie_txq_free_tfd(trans, txq);
 	}
 
-	iwl_pcie_txq_progress(trans_pcie, txq);
+	iwl_pcie_txq_progress(txq);
 
 	if (iwl_queue_space(&txq->q) > txq->q.low_mark)
 		iwl_wake_queue(trans, txq);
@@ -1112,7 +1112,7 @@ static void iwl_pcie_cmdq_reclaim(struct iwl_trans *trans, int txq_id, int idx)
 		spin_unlock_irqrestore(&trans_pcie->reg_lock, flags);
 	}
 
-	iwl_pcie_txq_progress(trans_pcie, txq);
+	iwl_pcie_txq_progress(txq);
 }
 
 static int iwl_pcie_txq_set_ratid_map(struct iwl_trans *trans, u16 ra_tid,
@@ -1145,14 +1145,18 @@ static int iwl_pcie_txq_set_ratid_map(struct iwl_trans *trans, u16 ra_tid,
 #define BUILD_RAxTID(sta_id, tid)	(((sta_id) << 4) + (tid))
 
 void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, u16 ssn,
-			       const struct iwl_trans_txq_scd_cfg *cfg)
+			       const struct iwl_trans_txq_scd_cfg *cfg,
+			       unsigned int wdg_timeout)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
+	struct iwl_txq *txq = &trans_pcie->txq[txq_id];
 	int fifo = -1;
 
 	if (test_and_set_bit(txq_id, trans_pcie->queue_used))
 		WARN_ONCE(1, "queue %d already used - expect issues", txq_id);
 
+	txq->wd_timeout = msecs_to_jiffies(wdg_timeout);
+
 	if (cfg) {
 		fifo = cfg->fifo;
 
@@ -1176,7 +1180,7 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, u16 ssn,
 
 			/* enable aggregations for the queue */
 			iwl_scd_txq_enable_agg(trans, txq_id);
-			trans_pcie->txq[txq_id].ampdu = true;
+			txq->ampdu = true;
 		} else {
 			/*
 			 * disable aggregations for the queue, this will also
@@ -1185,14 +1189,14 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, u16 ssn,
 			 */
 			iwl_scd_txq_disable_agg(trans, txq_id);
 
-			ssn = trans_pcie->txq[txq_id].q.read_ptr;
+			ssn = txq->q.read_ptr;
 		}
 	}
 
 	/* Place first TFD at index corresponding to start sequence number.
 	 * Assumes that ssn_idx is valid (!= 0xFFF) */
-	trans_pcie->txq[txq_id].q.read_ptr = (ssn & 0xff);
-	trans_pcie->txq[txq_id].q.write_ptr = (ssn & 0xff);
+	txq->q.read_ptr = (ssn & 0xff);
+	txq->q.write_ptr = (ssn & 0xff);
 	iwl_write_direct32(trans, HBUS_TARG_WRPTR,
 			   (ssn & 0xff) | (txq_id << 8));
 
@@ -1233,7 +1237,7 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, u16 ssn,
 				    txq_id, ssn & 0xff);
 	}
 
-	trans_pcie->txq[txq_id].active = true;
+	txq->active = true;
 }
 
 void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id,
@@ -1498,8 +1502,8 @@ static int iwl_pcie_enqueue_hcmd(struct iwl_trans *trans,
 	trace_iwlwifi_dev_hcmd(trans->dev, cmd, cmd_size, &out_cmd->hdr);
 
 	/* start timer if queue currently empty */
-	if (q->read_ptr == q->write_ptr && trans_pcie->wd_timeout)
-		mod_timer(&txq->stuck_timer, jiffies + trans_pcie->wd_timeout);
+	if (q->read_ptr == q->write_ptr && txq->wd_timeout)
+		mod_timer(&txq->stuck_timer, jiffies + txq->wd_timeout);
 
 	spin_lock_irqsave(&trans_pcie->reg_lock, flags);
 	ret = iwl_pcie_set_cmd_in_flight(trans, cmd);
@@ -1849,9 +1853,8 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb,
 
 	/* start timer if queue currently empty */
 	if (q->read_ptr == q->write_ptr) {
-		if (trans_pcie->wd_timeout)
-			mod_timer(&txq->stuck_timer,
-				  jiffies + trans_pcie->wd_timeout);
+		if (txq->wd_timeout)
+			mod_timer(&txq->stuck_timer, jiffies + txq->wd_timeout);
 		IWL_DEBUG_RPM(trans, "Q: %d first tx - take ref\n", q->id);
 		iwl_trans_pcie_ref(trans);
 	}
-- 
cgit v1.1


From 5a4b2afa77dea0e0ce6aa1c3f0dbf90dd9a681eb Mon Sep 17 00:00:00 2001
From: Haim Dreyfuss <haim.dreyfuss@intel.com>
Date: Tue, 13 Jan 2015 11:54:51 +0200
Subject: iwlwifi: mvm: Fix a few EBS error handling bugs

Last EBS status wasn't set to success in the initialization, which
caused the first scan to be without EBS. Fix that.

When EBS is not enabled by the driver, the FW still sends ebs_status success,
which can override EBS failure state. Consider only EBS failures, to avoid
such override. Last_ebs_success is set back to true upon disconnection.

Last_ebs_success wasn't set in umac scan abort flow, fix that too.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/ops.c  |  3 +++
 drivers/net/wireless/iwlwifi/mvm/scan.c | 13 ++++++++++---
 2 files changed, 13 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c
index b6181ef..2dffc360 100644
--- a/drivers/net/wireless/iwlwifi/mvm/ops.c
+++ b/drivers/net/wireless/iwlwifi/mvm/ops.c
@@ -568,6 +568,9 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg,
 	if (!mvm->scan_cmd)
 		goto out_free;
 
+	/* Set EBS as successful as long as not stated otherwise by the FW. */
+	mvm->last_ebs_successful = true;
+
 	err = iwl_mvm_mac_setup_register(mvm);
 	if (err)
 		goto out_free;
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 3bd5f34..4169e3d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -704,7 +704,8 @@ int iwl_mvm_rx_scan_offload_complete_notif(struct iwl_mvm *mvm,
 		iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
 	}
 
-	mvm->last_ebs_successful = !ebs_status;
+	if (ebs_status)
+		mvm->last_ebs_successful = false;
 
 	return 0;
 }
@@ -2025,7 +2026,9 @@ int iwl_mvm_rx_umac_scan_complete_notif(struct iwl_mvm *mvm,
 		       notif->ebs_status == IWL_SCAN_EBS_SUCCESS ?
 				"success" : "failed");
 
-	mvm->last_ebs_successful = !notif->ebs_status;
+	if (notif->ebs_status)
+		mvm->last_ebs_successful = false;
+
 	mvm->scan_uid[uid_idx] = 0;
 
 	if (!sched) {
@@ -2058,10 +2061,14 @@ static bool iwl_scan_umac_done_check(struct iwl_notif_wait_data *notif_wait,
 
 	/*
 	 * Clear scan uid of scans that was aborted from above and completed
-	 * in FW so the RX handler does nothing.
+	 * in FW so the RX handler does nothing. Set last_ebs_successful here if
+	 * needed.
 	 */
 	scan_done->mvm->scan_uid[uid_idx] = 0;
 
+	if (notif->ebs_status)
+		scan_done->mvm->last_ebs_successful = false;
+
 	return !iwl_mvm_find_scan_type(scan_done->mvm, scan_done->type);
 }
 
-- 
cgit v1.1


From fd66fc1cafd72ddf27dbec3a5e29e99839d1bc84 Mon Sep 17 00:00:00 2001
From: Luciano Coelho <luciano.coelho@intel.com>
Date: Tue, 27 Jan 2015 15:06:57 +0200
Subject: iwlwifi: mvm: fix failure path when power_update fails in
 add_interface

When iwl_mvm_power_update_mac() is called, we have already added the
mac context, so if this call fails we should remove the mac.

CC: <stable@vger.kernel.org> [3.15+]
Fixes: commit e5e7aa8e2561 ('iwlwifi: mvm: refactor power code')
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index 51e02e6..1ff7ec0 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1355,7 +1355,7 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw,
 
 	ret = iwl_mvm_power_update_mac(mvm);
 	if (ret)
-		goto out_release;
+		goto out_remove_mac;
 
 	/* beacon filtering */
 	ret = iwl_mvm_disable_beacon_filter(mvm, vif, 0);
-- 
cgit v1.1


From 4db6558ccc4124d725d4c96eb55720bbbb597112 Mon Sep 17 00:00:00 2001
From: Haim Dreyfuss <haim.dreyfuss@intel.com>
Date: Mon, 5 Jan 2015 15:00:35 +0200
Subject: iwlwifi: mvm: Enable EBS also in single scan on umac interface

Enable EBS on one shot scans if supported by FW.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Reviewed-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/scan.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 4169e3d..8b74ce7 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -1863,6 +1863,13 @@ int iwl_mvm_scan_umac(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 	flags |= IWL_UMAC_SCAN_GEN_FLAGS_PASS_ALL;
 
 	cmd->general_flags = cpu_to_le32(flags);
+
+	if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_SINGLE_SCAN_EBS &&
+	    mvm->last_ebs_successful)
+		cmd->channel_flags = IWL_SCAN_CHANNEL_FLAG_EBS |
+				     IWL_SCAN_CHANNEL_FLAG_EBS_ACCURATE |
+				     IWL_SCAN_CHANNEL_FLAG_CACHE_ADD;
+
 	cmd->n_channels = req->req.n_channels;
 
 	for (i = 0; i < req->req.n_ssids; i++)
-- 
cgit v1.1


From a25d40e27e542b8cd936ef1803e18304a6b2afb8 Mon Sep 17 00:00:00 2001
From: Ilan Peer <ilan.peer@intel.com>
Date: Fri, 23 Jan 2015 21:13:01 +0200
Subject: iwlwifi: mvm: Fix building channels in scan_config_cmd

Use the chanel hw_value and not the center frequency when
building channel array for scan_config_cmd.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/scan.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index 8b74ce7..7e9aa3c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -1683,10 +1683,10 @@ int iwl_mvm_config_scan(struct iwl_mvm *mvm)
 
 	band = &mvm->nvm_data->bands[IEEE80211_BAND_2GHZ];
 	for (i = 0; i < band->n_channels; i++, j++)
-		scan_config->channel_array[j] = band->channels[i].center_freq;
+		scan_config->channel_array[j] = band->channels[i].hw_value;
 	band = &mvm->nvm_data->bands[IEEE80211_BAND_5GHZ];
 	for (i = 0; i < band->n_channels; i++, j++)
-		scan_config->channel_array[j] = band->channels[i].center_freq;
+		scan_config->channel_array[j] = band->channels[i].hw_value;
 
 	cmd.data[0] = scan_config;
 	cmd.len[0] = cmd_size;
-- 
cgit v1.1


From c38740d015577dc0c28b03210050af338d35e1b7 Mon Sep 17 00:00:00 2001
From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Mon, 2 Feb 2015 19:49:43 +0200
Subject: iwlwifi: mvm: don't send a command the firmware doesn't know

-9.ucode doesn't know the command SHARED_MEM_CFG yet.

Fixes: 04fd2c28226f ("iwlwifi: mvm: add rxf and txf to dump data")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/fw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c
index a322a5e..ca38e98 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw.c
+++ b/drivers/net/wireless/iwlwifi/mvm/fw.c
@@ -575,7 +575,8 @@ int iwl_mvm_up(struct iwl_mvm *mvm)
 		goto error;
 	}
 
-	iwl_mvm_get_shared_mem_conf(mvm);
+	if (IWL_UCODE_API(mvm->fw->ucode_ver) >= 10)
+		iwl_mvm_get_shared_mem_conf(mvm);
 
 	ret = iwl_mvm_sf_update(mvm, NULL, false);
 	if (ret)
-- 
cgit v1.1


From b9a641d9cb768177a7c867e382a2fdb6023b06ad Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 2 Feb 2015 13:22:27 +0100
Subject: iwlwifi: mvm: reduce quota threshold

The quota threshold should be reduced to 4 to update the
firmware more frequently.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
---
 drivers/net/wireless/iwlwifi/mvm/constants.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/iwlwifi/mvm/constants.h b/drivers/net/wireless/iwlwifi/mvm/constants.h
index d91c46b..beba375 100644
--- a/drivers/net/wireless/iwlwifi/mvm/constants.h
+++ b/drivers/net/wireless/iwlwifi/mvm/constants.h
@@ -99,7 +99,7 @@
 #define IWL_MVM_BT_COEX_ANTENNA_COUPLING_THRS	30
 #define IWL_MVM_FW_MCAST_FILTER_PASS_ALL	0
 #define IWL_MVM_FW_BCAST_FILTER_PASS_ALL	0
-#define IWL_MVM_QUOTA_THRESHOLD			8
+#define IWL_MVM_QUOTA_THRESHOLD			4
 #define IWL_MVM_RS_RSSI_BASED_INIT_RATE         0
 #define IWL_MVM_RS_DISABLE_P2P_MIMO		0
 #define IWL_MVM_RS_NUM_TRY_BEFORE_ANT_TOGGLE    1
-- 
cgit v1.1


From b661a5da57766f4f565d64238b753d6efc0f5499 Mon Sep 17 00:00:00 2001
From: Troy Tan <troy_tan@realsil.com.cn>
Date: Tue, 20 Jan 2015 11:01:22 -0600
Subject: rtlwifi: rtl8192ee: Fix adhoc fail

When the buffer descriptor index exceeds 2, then a TX HANG condition
will result.

Signed-off-by: Troy Tan <troy_tan@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V3.18]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/rtlwifi/rtl8192ee/fw.c |  6 +-----
 drivers/net/wireless/rtlwifi/rtl8192ee/hw.c | 26 --------------------------
 2 files changed, 1 insertion(+), 31 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/fw.c b/drivers/net/wireless/rtlwifi/rtl8192ee/fw.c
index 45c128b..c5d4b80 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/fw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/fw.c
@@ -666,7 +666,6 @@ void rtl92ee_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
 	struct sk_buff *skb = NULL;
 
 	u32 totalpacketlen;
-	bool rtstatus;
 	u8 u1rsvdpageloc[5] = { 0 };
 	bool b_dlok = false;
 
@@ -728,10 +727,7 @@ void rtl92ee_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
 	memcpy((u8 *)skb_put(skb, totalpacketlen),
 	       &reserved_page_packet, totalpacketlen);
 
-	rtstatus = rtl_cmd_send_packet(hw, skb);
-
-	if (rtstatus)
-		b_dlok = true;
+	b_dlok = true;
 
 	if (b_dlok) {
 		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD ,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c
index 1a87edc..3c27ec2 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c
@@ -85,29 +85,6 @@ static void _rtl92ee_enable_bcn_sub_func(struct ieee80211_hw *hw)
 	_rtl92ee_set_bcn_ctrl_reg(hw, 0, BIT(1));
 }
 
-static void _rtl92ee_return_beacon_queue_skb(struct ieee80211_hw *hw)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
-	struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[BEACON_QUEUE];
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
-	while (skb_queue_len(&ring->queue)) {
-		struct rtl_tx_buffer_desc *entry =
-						&ring->buffer_desc[ring->idx];
-		struct sk_buff *skb = __skb_dequeue(&ring->queue);
-
-		pci_unmap_single(rtlpci->pdev,
-				 rtlpriv->cfg->ops->get_desc(
-				 (u8 *)entry, true, HW_DESC_TXBUFF_ADDR),
-				 skb->len, PCI_DMA_TODEVICE);
-		kfree_skb(skb);
-		ring->idx = (ring->idx + 1) % ring->entries;
-	}
-	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
-}
-
 static void _rtl92ee_disable_bcn_sub_func(struct ieee80211_hw *hw)
 {
 	_rtl92ee_set_bcn_ctrl_reg(hw, BIT(1), 0);
@@ -403,9 +380,6 @@ static void _rtl92ee_download_rsvd_page(struct ieee80211_hw *hw)
 		rtl_write_byte(rtlpriv, REG_DWBCN0_CTRL + 2,
 			       bcnvalid_reg | BIT(0));
 
-		/* Return Beacon TCB */
-		_rtl92ee_return_beacon_queue_skb(hw);
-
 		/* download rsvd page */
 		rtl92ee_set_fw_rsvdpagepkt(hw, false);
 
-- 
cgit v1.1


From 6e5f4436162848289f071be38ee6b87dc8ea653d Mon Sep 17 00:00:00 2001
From: Troy Tan <troy_tan@realsil.com.cn>
Date: Tue, 20 Jan 2015 11:01:23 -0600
Subject: rtlwifi: rtl8192ee: Fix TX hang due to failure to update TX write
 point

Initially, the routine to update the write point in the FIFO buffer was
coded to save CPU time by not doing the calculation every interrupt. This
was an error and results in TX hangs.

Signed-off-by: Troy Tan <troy_tan@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V3.18]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/rtlwifi/rtl8192ee/trx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
index 55d1da5..04b91aa 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
@@ -1027,8 +1027,7 @@ bool rtl92ee_is_tx_desc_closed(struct ieee80211_hw *hw, u8 hw_queue, u16 index)
 	static u8 stop_report_cnt;
 	struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[hw_queue];
 
-	/*checking Read/Write Point each interrupt wastes CPU */
-	if (stop_report_cnt > 15 || !rtlpriv->link_info.busytraffic) {
+	{
 		u16 point_diff = 0;
 		u16 cur_tx_rp, cur_tx_wp;
 		u32 tmpu32 = 0;
-- 
cgit v1.1


From 92ff754240b892cbc16dee5aa080322f3db88b68 Mon Sep 17 00:00:00 2001
From: Troy Tan <troy_tan@realsil.com.cn>
Date: Tue, 20 Jan 2015 11:01:24 -0600
Subject: rtlwifi: rtl8192ee: Fix parsing of received packet

The firmware supplies two kinds of packets via the RX mechanism. Besides the
normal data received over the air, these packets may contain bluetooth status
and other information. The present code fails to detect which kind of
information was received.

Signed-off-by: Troy Tan <troy_tan@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V3.18]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/rtlwifi/rtl8192ee/trx.c | 4 ++++
 drivers/net/wireless/rtlwifi/rtl8192ee/trx.h | 2 ++
 2 files changed, 6 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
index 04b91aa..2b60bdc 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
@@ -354,6 +354,10 @@ bool rtl92ee_rx_query_desc(struct ieee80211_hw *hw,
 	struct ieee80211_hdr *hdr;
 	u32 phystatus = GET_RX_DESC_PHYST(pdesc);
 
+	if (GET_RX_STATUS_DESC_RPT_SEL(pdesc) == 0)
+		status->packet_report_type = NORMAL_RX;
+	else
+		status->packet_report_type = C2H_PACKET;
 	status->length = (u16)GET_RX_DESC_PKT_LEN(pdesc);
 	status->rx_drvinfo_size = (u8)GET_RX_DESC_DRV_INFO_SIZE(pdesc) *
 				  RX_DRV_INFO_SIZE_UNIT;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.h b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.h
index 48504c2..5abb749 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.h
@@ -542,6 +542,8 @@
 	LE_BITS_TO_4BYTE(__pdesc+8, 12, 4)
 #define GET_RX_DESC_RX_IS_QOS(__pdesc)			\
 	LE_BITS_TO_4BYTE(__pdesc+8, 16, 1)
+#define GET_RX_STATUS_DESC_RPT_SEL(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+8, 28, 1)
 
 #define GET_RX_DESC_RXMCS(__pdesc)			\
 	LE_BITS_TO_4BYTE(__pdesc+12, 0, 7)
-- 
cgit v1.1


From 21b39ddb5bb2294fe64fbd29045591fe0707825f Mon Sep 17 00:00:00 2001
From: Troy Tan <troy_tan@realsil.com.cn>
Date: Tue, 20 Jan 2015 11:01:26 -0600
Subject: rtlwifi: rtl8192ee: Fix DMA stalls

There are instances where the DMA engine stalls. The new code detects
such stalls and restarts DMA without needing a power reset.

Signed-off-by: Troy Tan <troy_tan@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.18]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/rtlwifi/rtl8192ee/hw.c  | 140 +++++++++++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192ee/reg.h |   2 +
 2 files changed, 142 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c
index 3c27ec2..b461b31 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/hw.c
@@ -1137,6 +1137,139 @@ void rtl92ee_enable_hw_security_config(struct ieee80211_hw *hw)
 	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
 }
 
+static bool _rtl8192ee_check_pcie_dma_hang(struct rtl_priv *rtlpriv)
+{
+	u8 tmp;
+
+	/* write reg 0x350 Bit[26]=1. Enable debug port. */
+	tmp = rtl_read_byte(rtlpriv, REG_BACKDOOR_DBI_DATA + 3);
+	if (!(tmp & BIT(2))) {
+		rtl_write_byte(rtlpriv, REG_BACKDOOR_DBI_DATA + 3,
+			       tmp | BIT(2));
+		mdelay(100); /* Suggested by DD Justin_tsai. */
+	}
+
+	/* read reg 0x350 Bit[25] if 1 : RX hang
+	 * read reg 0x350 Bit[24] if 1 : TX hang
+	 */
+	tmp = rtl_read_byte(rtlpriv, REG_BACKDOOR_DBI_DATA + 3);
+	if ((tmp & BIT(0)) || (tmp & BIT(1))) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+			 "CheckPcieDMAHang8192EE(): true!!\n");
+		return true;
+	}
+	return false;
+}
+
+static void _rtl8192ee_reset_pcie_interface_dma(struct rtl_priv *rtlpriv,
+						bool mac_power_on)
+{
+	u8 tmp;
+	bool release_mac_rx_pause;
+	u8 backup_pcie_dma_pause;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 "ResetPcieInterfaceDMA8192EE()\n");
+
+	/* Revise Note: Follow the document "PCIe RX DMA Hang Reset Flow_v03"
+	 * released by SD1 Alan.
+	 */
+
+	/* 1. disable register write lock
+	 *	write 0x1C bit[1:0] = 2'h0
+	 *	write 0xCC bit[2] = 1'b1
+	 */
+	tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL);
+	tmp &= ~(BIT(1) | BIT(0));
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL, tmp);
+	tmp = rtl_read_byte(rtlpriv, REG_PMC_DBG_CTRL2);
+	tmp |= BIT(2);
+	rtl_write_byte(rtlpriv, REG_PMC_DBG_CTRL2, tmp);
+
+	/* 2. Check and pause TRX DMA
+	 *	write 0x284 bit[18] = 1'b1
+	 *	write 0x301 = 0xFF
+	 */
+	tmp = rtl_read_byte(rtlpriv, REG_RXDMA_CONTROL);
+	if (tmp & BIT(2)) {
+		/* Already pause before the function for another reason. */
+		release_mac_rx_pause = false;
+	} else {
+		rtl_write_byte(rtlpriv, REG_RXDMA_CONTROL, (tmp | BIT(2)));
+		release_mac_rx_pause = true;
+	}
+
+	backup_pcie_dma_pause = rtl_read_byte(rtlpriv, REG_PCIE_CTRL_REG + 1);
+	if (backup_pcie_dma_pause != 0xFF)
+		rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFF);
+
+	if (mac_power_on) {
+		/* 3. reset TRX function
+		 *	write 0x100 = 0x00
+		 */
+		rtl_write_byte(rtlpriv, REG_CR, 0);
+	}
+
+	/* 4. Reset PCIe DMA
+	 *	write 0x003 bit[0] = 0
+	 */
+	tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	tmp &= ~(BIT(0));
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmp);
+
+	/* 5. Enable PCIe DMA
+	 *	write 0x003 bit[0] = 1
+	 */
+	tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	tmp |= BIT(0);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, tmp);
+
+	if (mac_power_on) {
+		/* 6. enable TRX function
+		 *	write 0x100 = 0xFF
+		 */
+		rtl_write_byte(rtlpriv, REG_CR, 0xFF);
+
+		/* We should init LLT & RQPN and
+		 * prepare Tx/Rx descrptor address later
+		 * because MAC function is reset.
+		 */
+	}
+
+	/* 7. Restore PCIe autoload down bit
+	 *	write 0xF8 bit[17] = 1'b1
+	 */
+	tmp = rtl_read_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL + 2);
+	tmp |= BIT(1);
+	rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL + 2, tmp);
+
+	/* In MAC power on state, BB and RF maybe in ON state,
+	 * if we release TRx DMA here
+	 * it will cause packets to be started to Tx/Rx,
+	 * so we release Tx/Rx DMA later.
+	 */
+	if (!mac_power_on) {
+		/* 8. release TRX DMA
+		 *	write 0x284 bit[18] = 1'b0
+		 *	write 0x301 = 0x00
+		 */
+		if (release_mac_rx_pause) {
+			tmp = rtl_read_byte(rtlpriv, REG_RXDMA_CONTROL);
+			rtl_write_byte(rtlpriv, REG_RXDMA_CONTROL,
+				       (tmp & (~BIT(2))));
+		}
+		rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1,
+			       backup_pcie_dma_pause);
+	}
+
+	/* 9. lock system register
+	 *	write 0xCC bit[2] = 1'b0
+	 */
+	tmp = rtl_read_byte(rtlpriv, REG_PMC_DBG_CTRL2);
+	tmp &= ~(BIT(2));
+	rtl_write_byte(rtlpriv, REG_PMC_DBG_CTRL2, tmp);
+}
+
 int rtl92ee_hw_init(struct ieee80211_hw *hw)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -1162,6 +1295,13 @@ int rtl92ee_hw_init(struct ieee80211_hw *hw)
 		rtlhal->fw_ps_state = FW_PS_STATE_ALL_ON_92E;
 	}
 
+	if (_rtl8192ee_check_pcie_dma_hang(rtlpriv)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "92ee dma hang!\n");
+		_rtl8192ee_reset_pcie_interface_dma(rtlpriv,
+						    rtlhal->mac_func_enable);
+		rtlhal->mac_func_enable = false;
+	}
+
 	rtstatus = _rtl92ee_init_mac(hw);
 
 	rtl_write_byte(rtlpriv, 0x577, 0x03);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/reg.h b/drivers/net/wireless/rtlwifi/rtl8192ee/reg.h
index 3f2a959..1eaa1fa 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/reg.h
@@ -77,9 +77,11 @@
 #define REG_HIMRE				0x00B8
 #define REG_HISRE				0x00BC
 
+#define REG_PMC_DBG_CTRL2			0x00CC
 #define REG_EFUSE_ACCESS			0x00CF
 #define REG_HPON_FSM				0x00EC
 #define REG_SYS_CFG1				0x00F0
+#define REG_MAC_PHY_CTRL_NORMAL			0x00F8
 #define REG_SYS_CFG2				0x00FC
 
 #define REG_CR					0x0100
-- 
cgit v1.1


From ee6f0dd8a836311883fedfe060f23e0da2176950 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 30 Jan 2015 00:40:04 -0800
Subject: mwifiex: correction in wakeup timer handling

Wakeup timer is in sync with 'pm_wakeup_fw_try' flag. It
has been started instead of cancelling at one place. This
patch corrects it.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/sta_event.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/sta_event.c b/drivers/net/wireless/mwifiex/sta_event.c
index c03b82c..80ffe741 100644
--- a/drivers/net/wireless/mwifiex/sta_event.c
+++ b/drivers/net/wireless/mwifiex/sta_event.c
@@ -312,8 +312,7 @@ int mwifiex_process_sta_event(struct mwifiex_private *priv)
 					adapter->ps_state = PS_STATE_AWAKE;
 					adapter->pm_wakeup_card_req = false;
 					adapter->pm_wakeup_fw_try = false;
-					mod_timer(&adapter->wakeup_timer,
-						  jiffies + (HZ*3));
+					del_timer_sync(&adapter->wakeup_timer);
 					break;
 				}
 				if (!mwifiex_send_null_packet
-- 
cgit v1.1


From 7a1f4e61eb6417aecd20822a5f15e72d21c7f3f9 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 30 Jan 2015 00:40:05 -0800
Subject: mwifiex: fix memory leak in mwifiex_send_processed_packet()

Memory is leaked after downloading already processed packet. This
patch fixes the problem by freeing returned skb. Other transmit
paths don't have this problem.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/wmm.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c
index ffffd2c..ef717ac 100644
--- a/drivers/net/wireless/mwifiex/wmm.c
+++ b/drivers/net/wireless/mwifiex/wmm.c
@@ -1228,6 +1228,9 @@ mwifiex_send_processed_packet(struct mwifiex_private *priv,
 	case -EINPROGRESS:
 		if (adapter->iface_type != MWIFIEX_PCIE)
 			adapter->data_sent = false;
+		break;
+	case 0:
+		mwifiex_write_data_complete(adapter, skb, 0, ret);
 	default:
 		break;
 	}
-- 
cgit v1.1


From 0ea3186ce03cfa9b1c5cb8677ac3ffcd19695cd7 Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 30 Jan 2015 00:40:06 -0800
Subject: mwifiex: fix NULL packet downloading issues

This patch makes sure that skb is freed after downloading
NULL packet in error cases. Also, USB chipsets return
-EINPROGRESS after downloading packets, they are freed in
USB completion handler later. We will add missing change
to set tx_lock_flag for USB which blocks further packets.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/sta_tx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/sta_tx.c b/drivers/net/wireless/mwifiex/sta_tx.c
index 1debe76..5ce2d9a 100644
--- a/drivers/net/wireless/mwifiex/sta_tx.c
+++ b/drivers/net/wireless/mwifiex/sta_tx.c
@@ -183,9 +183,13 @@ int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags)
 	}
 	switch (ret) {
 	case -EBUSY:
-		adapter->data_sent = true;
-		/* Fall through FAILURE handling */
+		dev_kfree_skb_any(skb);
+		dev_err(adapter->dev, "%s: host_to_card failed: ret=%d\n",
+			__func__, ret);
+		adapter->dbg.num_tx_host_to_card_failure++;
+		break;
 	case -1:
+		adapter->data_sent = false;
 		dev_kfree_skb_any(skb);
 		dev_err(adapter->dev, "%s: host_to_card failed: ret=%d\n",
 			__func__, ret);
@@ -198,6 +202,7 @@ int mwifiex_send_null_packet(struct mwifiex_private *priv, u8 flags)
 		adapter->tx_lock_flag = true;
 		break;
 	case -EINPROGRESS:
+		adapter->tx_lock_flag = true;
 		break;
 	default:
 		break;
-- 
cgit v1.1


From fc8f0456dcce1701291928febf8410994749d4af Mon Sep 17 00:00:00 2001
From: Amitkumar Karwar <akarwar@marvell.com>
Date: Fri, 30 Jan 2015 00:40:07 -0800
Subject: mwifiex: disable UAPSD mode when AP starts

When AP is started, firmware exits power save mode. This
means power save manager of AP takes priority over station.
Firmware stop sending periodic AWAKE events to host.

We may have UAPSD enabled on station which buffers data
packets until AWAKE event from firmware. Data path is
unnecessarily blocked in this case. This patch disables
UAPSD mode to reenable transmit data path.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/mwifiex/sta_cmdresp.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/mwifiex/sta_cmdresp.c b/drivers/net/wireless/mwifiex/sta_cmdresp.c
index 39f3176..5f8da59 100644
--- a/drivers/net/wireless/mwifiex/sta_cmdresp.c
+++ b/drivers/net/wireless/mwifiex/sta_cmdresp.c
@@ -1105,6 +1105,9 @@ int mwifiex_process_sta_cmdresp(struct mwifiex_private *priv, u16 cmdresp_no,
 	case HostCmd_CMD_UAP_SYS_CONFIG:
 		break;
 	case HostCmd_CMD_UAP_BSS_START:
+		adapter->tx_lock_flag = false;
+		adapter->pps_uapsd_mode = false;
+		adapter->delay_null_pkt = false;
 		priv->bss_started = 1;
 		break;
 	case HostCmd_CMD_UAP_BSS_STOP:
-- 
cgit v1.1


From 4895efc9a11ba6a3089b42c5dd4aabf68e467d64 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:21 +0530
Subject: ath9k: Remove ATH9K_HW_WOW_DEVICE_CAPABLE

Enabling WOW based on the chip is incorrect since
it needs to be done for specific sub-devices which
have proper platform support.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/hw.c  | 3 ---
 drivers/net/wireless/ath/ath9k/hw.h  | 2 --
 drivers/net/wireless/ath/ath9k/wow.c | 4 +---
 3 files changed, 1 insertion(+), 8 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 82d8f32..8c2f9e2 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2544,9 +2544,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 			pCap->hw_caps |= ATH9K_HW_CAP_RTT;
 	}
 
-	if (AR_SREV_9462(ah))
-		pCap->hw_caps |= ATH9K_HW_WOW_DEVICE_CAPABLE;
-
 	if (AR_SREV_9300_20_OR_LATER(ah) &&
 	    ah->eep_ops->get_eeprom(ah, EEP_PAPRD))
 			pCap->hw_caps |= ATH9K_HW_CAP_PAPRD;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 450704e..dabc94e 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -248,12 +248,10 @@ enum ath9k_hw_caps {
 #ifdef CONFIG_ATH9K_PCOEM
 	ATH9K_HW_CAP_RTT			= BIT(14),
 	ATH9K_HW_CAP_MCI			= BIT(15),
-	ATH9K_HW_WOW_DEVICE_CAPABLE		= BIT(16),
 	ATH9K_HW_CAP_BT_ANT_DIV			= BIT(17),
 #else
 	ATH9K_HW_CAP_RTT			= 0,
 	ATH9K_HW_CAP_MCI			= 0,
-	ATH9K_HW_WOW_DEVICE_CAPABLE		= 0,
 	ATH9K_HW_CAP_BT_ANT_DIV			= 0,
 #endif
 	ATH9K_HW_CAP_DFS			= BIT(18),
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 5f30e58..4ffaadd 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -352,9 +352,7 @@ void ath9k_init_wow(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
 
-	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_WOW_DEVICE_CAPABLE) &&
-	    (sc->driver_data & ATH9K_PCI_WOW) &&
-	    device_can_wakeup(sc->dev))
+	if ((sc->driver_data & ATH9K_PCI_WOW) && device_can_wakeup(sc->dev))
 		hw->wiphy->wowlan = &ath9k_wowlan_support;
 
 	atomic_set(&sc->wow_sleep_proc_intr, -1);
-- 
cgit v1.1


From 13084c2d18bfee72594ba3a969dfdd972544e644 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:22 +0530
Subject: ath9k: Return early for error conditions

Do not try to cancel work instances and ANI when
the device is not present or WOW triggers are
not configured. Bail out early and use ath_err()
for such error conditions.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/wow.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 4ffaadd..1d5cd88 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -197,21 +197,21 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 
 	mutex_lock(&sc->mutex);
 
-	ath_cancel_work(sc);
-	ath_stop_ani(sc);
-
 	if (test_bit(ATH_OP_INVALID, &common->op_flags)) {
-		ath_dbg(common, ANY, "Device not present\n");
-		ret = -EINVAL;
+		ath_err(common, "Device not present\n");
+		ret = -ENODEV;
 		goto fail_wow;
 	}
 
 	if (WARN_ON(!wowlan)) {
-		ath_dbg(common, WOW, "None of the WoW triggers enabled\n");
+		ath_err(common, "None of the WoW triggers enabled\n");
 		ret = -EINVAL;
 		goto fail_wow;
 	}
 
+	ath_cancel_work(sc);
+	ath_stop_ani(sc);
+
 	if (!device_can_wakeup(sc->dev)) {
 		ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
 		ret = 1;
-- 
cgit v1.1


From 410b4e27992b7bc3ed8064dc9383eb66c1fee04d Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:23 +0530
Subject: ath9k: Remove redundant device_can_wakeup() check

WOW capability is registered with mac80211 only when
the device has the ability to wakeup, so there is no
need to check in the suspend() routine.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/wow.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 1d5cd88..272c05c 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -212,12 +212,6 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 	ath_cancel_work(sc);
 	ath_stop_ani(sc);
 
-	if (!device_can_wakeup(sc->dev)) {
-		ath_dbg(common, WOW, "device_can_wakeup failed, WoW is not enabled\n");
-		ret = 1;
-		goto fail_wow;
-	}
-
 	/*
 	 * none of the sta vifs are associated
 	 * and we are not currently handling multivif
-- 
cgit v1.1


From dc4b277d51599453f9ebf8e117957c26187d5fce Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:24 +0530
Subject: ath9k: Check early for multi-vif/STA conditions

If multiple interfaces are active or there is no
associated station interface, bail out early and
return 1 so that mac80211 can proceed with the normal
suspend routine.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/wow.c | 22 +++++++---------------
 1 file changed, 7 insertions(+), 15 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 272c05c..1799a1d 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -209,29 +209,21 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 		goto fail_wow;
 	}
 
-	ath_cancel_work(sc);
-	ath_stop_ani(sc);
-
-	/*
-	 * none of the sta vifs are associated
-	 * and we are not currently handling multivif
-	 * cases, for instance we have to seperately
-	 * configure 'keep alive frame' for each
-	 * STA.
-	 */
-
-	if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
-		ath_dbg(common, WOW, "None of the STA vifs are associated\n");
+	if (sc->cur_chan->nvifs > 1) {
+		ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
 		ret = 1;
 		goto fail_wow;
 	}
 
-	if (sc->cur_chan->nvifs > 1) {
-		ath_dbg(common, WOW, "WoW for multivif is not yet supported\n");
+	if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
+		ath_dbg(common, WOW, "None of the STA vifs are associated\n");
 		ret = 1;
 		goto fail_wow;
 	}
 
+	ath_cancel_work(sc);
+	ath_stop_ani(sc);
+
 	ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
 
 	ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
-- 
cgit v1.1


From 1331f5a751eb143bc7732c880bbdde4431e90a77 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:25 +0530
Subject: ath9k: Check multi-channel context for WOW

If CONFIG_ATH9K_CHANNEL_CONTEXT is enabled, check whether
multiple contexts are active and if so, return 1 without
enabling WOW since we don't support it in this case.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/wow.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 1799a1d..1b005c6 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -215,6 +215,15 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 		goto fail_wow;
 	}
 
+	if (ath9k_is_chanctx_enabled()) {
+		if (test_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags)) {
+			ath_dbg(common, WOW,
+				"Multi-channel WOW is not supported\n");
+			ret = 1;
+			goto fail_wow;
+		}
+	}
+
 	if (!test_bit(ATH_OP_PRIM_STA_VIF, &common->op_flags)) {
 		ath_dbg(common, WOW, "None of the STA vifs are associated\n");
 		ret = 1;
-- 
cgit v1.1


From 661d25815ea533d06c7535ddd1c4810fa7ab9e22 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:26 +0530
Subject: ath9k: Fix wow init/deinit

Registering the card as a wakeup source needs to
be done once, during initialization. When the WOW
configuration changes, the card's status as wakeup
source needs to be changed too and this is done
via the set_wakeup() callback. Also, make sure
the device is removed properly using ath9k_deinit_wow().

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  4 ++++
 drivers/net/wireless/ath/ath9k/init.c  |  1 +
 drivers/net/wireless/ath/ath9k/wow.c   | 22 ++++++++++++++++++----
 3 files changed, 23 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index e84b576..4209d7b 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -838,6 +838,7 @@ struct ath9k_wow_pattern {
 
 #ifdef CONFIG_ATH9K_WOW
 void ath9k_init_wow(struct ieee80211_hw *hw);
+void ath9k_deinit_wow(struct ieee80211_hw *hw);
 int ath9k_suspend(struct ieee80211_hw *hw,
 		  struct cfg80211_wowlan *wowlan);
 int ath9k_resume(struct ieee80211_hw *hw);
@@ -846,6 +847,9 @@ void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled);
 static inline void ath9k_init_wow(struct ieee80211_hw *hw)
 {
 }
+static inline void ath9k_deinit_wow(struct ieee80211_hw *hw)
+{
+}
 static inline int ath9k_suspend(struct ieee80211_hw *hw,
 				struct cfg80211_wowlan *wowlan)
 {
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 2aef14e..6c6e884 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -996,6 +996,7 @@ void ath9k_deinit_device(struct ath_softc *sc)
 	ath9k_ps_restore(sc);
 
 	ath9k_deinit_debug(sc);
+	ath9k_deinit_wow(hw);
 	ieee80211_unregister_hw(hw);
 	ath_rx_cleanup(sc);
 	ath9k_deinit_softc(sc);
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 1b005c6..8bcbaa9 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -336,20 +336,34 @@ int ath9k_resume(struct ieee80211_hw *hw)
 void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
 {
 	struct ath_softc *sc = hw->priv;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	mutex_lock(&sc->mutex);
-	device_init_wakeup(sc->dev, 1);
 	device_set_wakeup_enable(sc->dev, enabled);
 	mutex_unlock(&sc->mutex);
+
+	ath_dbg(common, WOW, "WoW wakeup source is %s\n",
+		(enabled) ? "enabled" : "disabled");
 }
 
 void ath9k_init_wow(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
 
-	if ((sc->driver_data & ATH9K_PCI_WOW) && device_can_wakeup(sc->dev))
+	if (sc->driver_data & ATH9K_PCI_WOW) {
 		hw->wiphy->wowlan = &ath9k_wowlan_support;
 
-	atomic_set(&sc->wow_sleep_proc_intr, -1);
-	atomic_set(&sc->wow_got_bmiss_intr, -1);
+		atomic_set(&sc->wow_sleep_proc_intr, -1);
+		atomic_set(&sc->wow_got_bmiss_intr, -1);
+
+		device_init_wakeup(sc->dev, 1);
+	}
+}
+
+void ath9k_deinit_wow(struct ieee80211_hw *hw)
+{
+	struct ath_softc *sc = hw->priv;
+
+	if (sc->driver_data & ATH9K_PCI_WOW)
+		device_init_wakeup(sc->dev, 0);
 }
-- 
cgit v1.1


From 249943a2215c4d03c5dacf549b4ef9bf8439f17b Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:27 +0530
Subject: ath9k: Check WOW triggers properly

This patch makes sure that valid WOW triggers
are present before trying to suspend the device.
Also, introduce and use ATH_OP_WOW_ENABLED to
bypass PCI suspend and clear it in resume().

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath.h       |  1 +
 drivers/net/wireless/ath/ath9k/pci.c |  5 +++-
 drivers/net/wireless/ath/ath9k/wow.c | 53 ++++++++++++++++--------------------
 3 files changed, 29 insertions(+), 30 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index ccba4fe..1eebe2e 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -64,6 +64,7 @@ enum ath_op_flags {
 	ATH_OP_HW_RESET,
 	ATH_OP_SCANNING,
 	ATH_OP_MULTI_CHANNEL,
+	ATH_OP_WOW_ENABLED,
 };
 
 enum ath_bus_type {
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index cc5c681..e6fef1b 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -998,9 +998,12 @@ static int ath_pci_suspend(struct device *device)
 	struct pci_dev *pdev = to_pci_dev(device);
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_softc *sc = hw->priv;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
-	if (sc->wow_enabled)
+	if (test_bit(ATH_OP_WOW_ENABLED, &common->op_flags)) {
+		dev_info(&pdev->dev, "WOW is enabled, bypassing PCI suspend\n");
 		return 0;
+	}
 
 	/* The device has to be moved to FULLSLEEP forcibly.
 	 * Otherwise the chip never moved to full sleep,
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 8bcbaa9..c0c564d 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -23,21 +23,21 @@ static const struct wiphy_wowlan_support ath9k_wowlan_support = {
 	.pattern_max_len = MAX_PATTERN_SIZE,
 };
 
-static void ath9k_wow_map_triggers(struct ath_softc *sc,
-				   struct cfg80211_wowlan *wowlan,
-				   u32 *wow_triggers)
+static u8 ath9k_wow_map_triggers(struct ath_softc *sc,
+				 struct cfg80211_wowlan *wowlan)
 {
+	u8 wow_triggers = 0;
+
 	if (wowlan->disconnect)
-		*wow_triggers |= AH_WOW_LINK_CHANGE |
-				 AH_WOW_BEACON_MISS;
+		wow_triggers |= AH_WOW_LINK_CHANGE |
+				AH_WOW_BEACON_MISS;
 	if (wowlan->magic_pkt)
-		*wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
+		wow_triggers |= AH_WOW_MAGIC_PATTERN_EN;
 
 	if (wowlan->n_patterns)
-		*wow_triggers |= AH_WOW_USER_PATTERN_EN;
-
-	sc->wow_enabled = *wow_triggers;
+		wow_triggers |= AH_WOW_USER_PATTERN_EN;
 
+	return wow_triggers;
 }
 
 static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
@@ -45,7 +45,7 @@ static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	int pattern_count = 0;
-	int i, byte_cnt;
+	int i, byte_cnt = 0;
 	u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
 	u8 dis_deauth_mask[MAX_PATTERN_SIZE];
 
@@ -80,12 +80,7 @@ static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
 	 *			    | x:x:x:x:x:x  -- 22 bytes
 	 */
 
-	/* Create Disassociate Pattern first */
-
-	byte_cnt = 0;
-
 	/* Fill out the mask with all FF's */
-
 	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i++)
 		dis_deauth_mask[i] = 0xff;
 
@@ -108,17 +103,13 @@ static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
 	byte_cnt += 6;
 
 	/* copy the bssid, its same as the source mac address */
-
 	memcpy((dis_deauth_pattern + byte_cnt), common->curbssid, ETH_ALEN);
 
 	/* Create Disassociate pattern mask */
-
 	dis_deauth_mask[0] = 0xfe;
 	dis_deauth_mask[1] = 0x03;
 	dis_deauth_mask[2] = 0xc0;
 
-	ath_dbg(common, WOW, "Adding disassoc/deauth patterns for WoW\n");
-
 	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
 				   pattern_count, byte_cnt);
 
@@ -131,7 +122,6 @@ static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
 
 	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
 				   pattern_count, byte_cnt);
-
 }
 
 static void ath9k_wow_add_pattern(struct ath_softc *sc,
@@ -190,7 +180,7 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 	struct ath_softc *sc = hw->priv;
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
-	u32 wow_triggers_enabled = 0;
+	u8 triggers;
 	int ret = 0;
 
 	ath9k_deinit_channel_context(sc);
@@ -230,14 +220,16 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 		goto fail_wow;
 	}
 
+	triggers = ath9k_wow_map_triggers(sc, wowlan);
+	if (!triggers) {
+		ath_dbg(common, WOW, "No valid WoW triggers\n");
+		ret = 1;
+		goto fail_wow;
+	}
+
 	ath_cancel_work(sc);
 	ath_stop_ani(sc);
 
-	ath9k_wow_map_triggers(sc, wowlan, &wow_triggers_enabled);
-
-	ath_dbg(common, WOW, "WoW triggers enabled 0x%x\n",
-		wow_triggers_enabled);
-
 	ath9k_ps_wakeup(sc);
 
 	ath9k_stop_btcoex(sc);
@@ -248,7 +240,7 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 	 */
 	ath9k_wow_add_disassoc_deauth_pattern(sc);
 
-	if (wow_triggers_enabled & AH_WOW_USER_PATTERN_EN)
+	if (triggers & AH_WOW_USER_PATTERN_EN)
 		ath9k_wow_add_pattern(sc, wowlan);
 
 	spin_lock_bh(&sc->sc_pcu_lock);
@@ -273,12 +265,13 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 	synchronize_irq(sc->irq);
 	tasklet_kill(&sc->intr_tq);
 
-	ath9k_hw_wow_enable(ah, wow_triggers_enabled);
+	ath9k_hw_wow_enable(ah, triggers);
 
 	ath9k_ps_restore(sc);
-	ath_dbg(common, ANY, "WoW enabled in ath9k\n");
+	ath_dbg(common, WOW, "Suspend with WoW triggers: 0x%x\n", triggers);
 	atomic_inc(&sc->wow_sleep_proc_intr);
 
+	set_bit(ATH_OP_WOW_ENABLED, &common->op_flags);
 fail_wow:
 	mutex_unlock(&sc->mutex);
 	return ret;
@@ -327,6 +320,8 @@ int ath9k_resume(struct ieee80211_hw *hw)
 	ath_restart_work(sc);
 	ath9k_start_btcoex(sc);
 
+	clear_bit(ATH_OP_WOW_ENABLED, &common->op_flags);
+
 	ath9k_ps_restore(sc);
 	mutex_unlock(&sc->mutex);
 
-- 
cgit v1.1


From c4d0975bba51ac339727703123cfca8034c1aeb3 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:28 +0530
Subject: ath9k: Remove unused BMISS processing

The various variables tracking bmiss interrupts
are not really used anywhere except in a debug
message. Remove them since they have no functional
purpose.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  2 --
 drivers/net/wireless/ath/ath9k/main.c  |  9 ---------
 drivers/net/wireless/ath/ath9k/wow.c   | 18 ------------------
 3 files changed, 29 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 4209d7b..803a7d4 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -1043,8 +1043,6 @@ struct ath_softc {
 	s16 tx99_power;
 
 #ifdef CONFIG_ATH9K_WOW
-	atomic_t wow_got_bmiss_intr;
-	atomic_t wow_sleep_proc_intr; /* in the middle of WoW sleep ? */
 	u32 wow_intr_before_sleep;
 #endif
 };
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 9a72640..98b1e4a 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -556,15 +556,6 @@ irqreturn_t ath_isr(int irq, void *dev)
 	    (status & ATH9K_INT_BB_WATCHDOG))
 		goto chip_reset;
 
-#ifdef CONFIG_ATH9K_WOW
-	if (status & ATH9K_INT_BMISS) {
-		if (atomic_read(&sc->wow_sleep_proc_intr) == 0) {
-			atomic_inc(&sc->wow_got_bmiss_intr);
-			atomic_dec(&sc->wow_sleep_proc_intr);
-		}
-	}
-#endif
-
 	if (status & ATH9K_INT_SWBA)
 		tasklet_schedule(&sc->bcon_tasklet);
 
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index c0c564d..fa60dbb 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -269,7 +269,6 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 
 	ath9k_ps_restore(sc);
 	ath_dbg(common, WOW, "Suspend with WoW triggers: 0x%x\n", triggers);
-	atomic_inc(&sc->wow_sleep_proc_intr);
 
 	set_bit(ATH_OP_WOW_ENABLED, &common->op_flags);
 fail_wow:
@@ -299,19 +298,6 @@ int ath9k_resume(struct ieee80211_hw *hw)
 
 	wow_status = ath9k_hw_wow_wakeup(ah);
 
-	if (atomic_read(&sc->wow_got_bmiss_intr) == 0) {
-		/*
-		 * some devices may not pick beacon miss
-		 * as the reason they woke up so we add
-		 * that here for that shortcoming.
-		 */
-		wow_status |= AH_WOW_BEACON_MISS;
-		atomic_dec(&sc->wow_got_bmiss_intr);
-		ath_dbg(common, ANY, "Beacon miss interrupt picked up during WoW sleep\n");
-	}
-
-	atomic_dec(&sc->wow_sleep_proc_intr);
-
 	if (wow_status) {
 		ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
 			ath9k_hw_wow_event_to_string(wow_status), wow_status);
@@ -347,10 +333,6 @@ void ath9k_init_wow(struct ieee80211_hw *hw)
 
 	if (sc->driver_data & ATH9K_PCI_WOW) {
 		hw->wiphy->wowlan = &ath9k_wowlan_support;
-
-		atomic_set(&sc->wow_sleep_proc_intr, -1);
-		atomic_set(&sc->wow_got_bmiss_intr, -1);
-
 		device_init_wakeup(sc->dev, 1);
 	}
 }
-- 
cgit v1.1


From e094c3375c5179ea30505676fd35e08568a77ee2 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:29 +0530
Subject: ath9k: Remove ath9k_hw_wow_event_to_string

Printing the value of the wakeup status is sufficient.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 15 ---------------
 drivers/net/wireless/ath/ath9k/hw.h         |  5 -----
 drivers/net/wireless/ath/ath9k/wow.c        | 10 +++-------
 3 files changed, 3 insertions(+), 27 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
index 81c88dd..3abc907 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_wow.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -19,21 +19,6 @@
 #include "reg.h"
 #include "hw-ops.h"
 
-const char *ath9k_hw_wow_event_to_string(u32 wow_event)
-{
-	if (wow_event & AH_WOW_MAGIC_PATTERN_EN)
-		return "Magic pattern";
-	if (wow_event & AH_WOW_USER_PATTERN_EN)
-		return "User pattern";
-	if (wow_event & AH_WOW_LINK_CHANGE)
-		return "Link change";
-	if (wow_event & AH_WOW_BEACON_MISS)
-		return "Beacon miss";
-
-	return  "unknown reason";
-}
-EXPORT_SYMBOL(ath9k_hw_wow_event_to_string);
-
 static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index dabc94e..22b0422 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1146,17 +1146,12 @@ ath9k_hw_get_btcoex_scheme(struct ath_hw *ah)
 
 
 #ifdef CONFIG_ATH9K_WOW
-const char *ath9k_hw_wow_event_to_string(u32 wow_event);
 void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
 				u8 *user_mask, int pattern_count,
 				int pattern_len);
 u32 ath9k_hw_wow_wakeup(struct ath_hw *ah);
 void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable);
 #else
-static inline const char *ath9k_hw_wow_event_to_string(u32 wow_event)
-{
-	return NULL;
-}
 static inline void ath9k_hw_wow_apply_pattern(struct ath_hw *ah,
 					      u8 *user_pattern,
 					      u8 *user_mask,
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index fa60dbb..d4cfbc3 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -281,7 +281,7 @@ int ath9k_resume(struct ieee80211_hw *hw)
 	struct ath_softc *sc = hw->priv;
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
-	u32 wow_status;
+	u8 status;
 
 	mutex_lock(&sc->mutex);
 
@@ -296,12 +296,8 @@ int ath9k_resume(struct ieee80211_hw *hw)
 
 	spin_unlock_bh(&sc->sc_pcu_lock);
 
-	wow_status = ath9k_hw_wow_wakeup(ah);
-
-	if (wow_status) {
-		ath_dbg(common, ANY, "Waking up due to WoW triggers %s with WoW status = %x\n",
-			ath9k_hw_wow_event_to_string(wow_status), wow_status);
-	}
+	status = ath9k_hw_wow_wakeup(ah);
+	ath_dbg(common, WOW, "Resume with WoW status: 0x%x\n", status);
 
 	ath_restart_work(sc);
 	ath9k_start_btcoex(sc);
-- 
cgit v1.1


From 8b861715087fe17796fe411eff1c7f7e493d0d10 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:30 +0530
Subject: ath9k: Add a debugfs file for WOW

This can be used to force WOW for cards that
are not present in the supported PCI ID list.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  1 +
 drivers/net/wireless/ath/ath9k/debug.c | 68 ++++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath9k/wow.c   |  4 +-
 3 files changed, 71 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 803a7d4..20216c5 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -1044,6 +1044,7 @@ struct ath_softc {
 
 #ifdef CONFIG_ATH9K_WOW
 	u32 wow_intr_before_sleep;
+	bool force_wow;
 #endif
 };
 
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index dd5d391..50a2e0a 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -1043,6 +1043,69 @@ static const struct file_operations fops_ackto = {
 };
 #endif
 
+#ifdef CONFIG_ATH9K_WOW
+
+static ssize_t read_file_wow(struct file *file, char __user *user_buf,
+			     size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	unsigned int len = 0, size = 32;
+	ssize_t retval;
+	char *buf;
+
+	buf = kzalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	len += scnprintf(buf + len, size - len, "WOW: %s\n",
+			 sc->force_wow ? "ENABLED" : "DISABLED");
+
+	if (len > size)
+		len = size;
+
+	retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+	kfree(buf);
+
+	return retval;
+}
+
+static ssize_t write_file_wow(struct file *file, const char __user *user_buf,
+			      size_t count, loff_t *ppos)
+{
+	struct ath_softc *sc = file->private_data;
+	unsigned long val;
+	char buf[32];
+	ssize_t len;
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len))
+		return -EFAULT;
+
+	buf[len] = '\0';
+	if (kstrtoul(buf, 0, &val))
+		return -EINVAL;
+
+	if (val != 1)
+		return -EINVAL;
+
+	if (!sc->force_wow) {
+		sc->force_wow = true;
+		ath9k_init_wow(sc->hw);
+	}
+
+	return count;
+}
+
+static const struct file_operations fops_wow = {
+	.read = read_file_wow,
+	.write = write_file_wow,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
+#endif
+
 static ssize_t read_file_tpc(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {
@@ -1313,6 +1376,11 @@ int ath9k_init_debug(struct ath_hw *ah)
 			    &fops_btcoex);
 #endif
 
+#ifdef CONFIG_ATH9K_WOW
+	debugfs_create_file("wow", S_IRUSR | S_IWUSR,
+			    sc->debug.debugfs_phy, sc, &fops_wow);
+#endif
+
 #ifdef CONFIG_ATH9K_DYNACK
 	debugfs_create_file("ack_to", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
 			    sc, &fops_ackto);
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index d4cfbc3..4b3b565 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -327,7 +327,7 @@ void ath9k_init_wow(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
 
-	if (sc->driver_data & ATH9K_PCI_WOW) {
+	if ((sc->driver_data & ATH9K_PCI_WOW) || sc->force_wow) {
 		hw->wiphy->wowlan = &ath9k_wowlan_support;
 		device_init_wakeup(sc->dev, 1);
 	}
@@ -337,6 +337,6 @@ void ath9k_deinit_wow(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
 
-	if (sc->driver_data & ATH9K_PCI_WOW)
+	if ((sc->driver_data & ATH9K_PCI_WOW) || sc->force_wow)
 		device_init_wakeup(sc->dev, 0);
 }
-- 
cgit v1.1


From 34d102c921100a70d8262adc1afc09f492782778 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:31 +0530
Subject: ath9k: Simplify user pattern configuration

There is no need to allocate a new structure and
free it for every user pattern, instead use local
variables.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  6 -----
 drivers/net/wireless/ath/ath9k/wow.c   | 49 +++++++++-------------------------
 2 files changed, 12 insertions(+), 43 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 20216c5..0f8e946 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -830,12 +830,6 @@ static inline void ath_fill_led_pin(struct ath_softc *sc)
 /* Wake on Wireless LAN */
 /************************/
 
-struct ath9k_wow_pattern {
-	u8 pattern_bytes[MAX_PATTERN_SIZE];
-	u8 mask_bytes[MAX_PATTERN_SIZE];
-	u32 pattern_len;
-};
-
 #ifdef CONFIG_ATH9K_WOW
 void ath9k_init_wow(struct ieee80211_hw *hw);
 void ath9k_deinit_wow(struct ieee80211_hw *hw);
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 4b3b565..da52b1f 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -128,50 +128,25 @@ static void ath9k_wow_add_pattern(struct ath_softc *sc,
 				  struct cfg80211_wowlan *wowlan)
 {
 	struct ath_hw *ah = sc->sc_ah;
-	struct ath9k_wow_pattern *wow_pattern = NULL;
 	struct cfg80211_pkt_pattern *patterns = wowlan->patterns;
+	u8 wow_pattern[MAX_PATTERN_SIZE];
+	u8 wow_mask[MAX_PATTERN_SIZE];
 	int mask_len;
 	s8 i = 0;
 
-	if (!wowlan->n_patterns)
-		return;
-
-	/*
-	 * Add the new user configured patterns
-	 */
 	for (i = 0; i < wowlan->n_patterns; i++) {
-
-		wow_pattern = kzalloc(sizeof(*wow_pattern), GFP_KERNEL);
-
-		if (!wow_pattern)
-			return;
-
-		/*
-		 * TODO: convert the generic user space pattern to
-		 * appropriate chip specific/802.11 pattern.
-		 */
-
-		mask_len = DIV_ROUND_UP(wowlan->patterns[i].pattern_len, 8);
-		memset(wow_pattern->pattern_bytes, 0, MAX_PATTERN_SIZE);
-		memset(wow_pattern->mask_bytes, 0, MAX_PATTERN_SIZE);
-		memcpy(wow_pattern->pattern_bytes, patterns[i].pattern,
-		       patterns[i].pattern_len);
-		memcpy(wow_pattern->mask_bytes, patterns[i].mask, mask_len);
-		wow_pattern->pattern_len = patterns[i].pattern_len;
-
-		/*
-		 * just need to take care of deauth and disssoc pattern,
-		 * make sure we don't overwrite them.
-		 */
-
-		ath9k_hw_wow_apply_pattern(ah, wow_pattern->pattern_bytes,
-					   wow_pattern->mask_bytes,
+		mask_len = DIV_ROUND_UP(patterns[i].pattern_len, 8);
+		memset(wow_pattern, 0, MAX_PATTERN_SIZE);
+		memset(wow_mask, 0, MAX_PATTERN_SIZE);
+		memcpy(wow_pattern, patterns[i].pattern, patterns[i].pattern_len);
+		memcpy(wow_mask, patterns[i].mask, mask_len);
+
+		ath9k_hw_wow_apply_pattern(ah,
+					   wow_pattern,
+					   wow_mask,
 					   i + 2,
-					   wow_pattern->pattern_len);
-		kfree(wow_pattern);
-
+					   patterns[i].pattern_len);
 	}
-
 }
 
 int ath9k_suspend(struct ieee80211_hw *hw,
-- 
cgit v1.1


From 41fe8837215a82ea3469267d6fac57e830f9e59a Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:32 +0530
Subject: ath9k: Add a HW structure for WOW

This can be used to hold the WOW state in
ath9k_hw.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 10 +++++-----
 drivers/net/wireless/ath/ath9k/hw.h         |  6 +++++-
 2 files changed, 10 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
index 3abc907..bb61417 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_wow.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -137,7 +137,7 @@ void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
 	 * other fields
 	 */
 
-	ah->wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+	ah->wow.wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
 
 	if (pattern_count < 4) {
 		/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
@@ -174,7 +174,7 @@ u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
 	 * register. This mask will clean it up.
 	 */
 
-	val &= ah->wow_event_mask;
+	val &= ah->wow.wow_event_mask;
 
 	if (val) {
 		if (val & AR_WOW_MAGIC_PAT_FOUND)
@@ -218,7 +218,7 @@ u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
 	if (ah->is_pciexpress)
 		ath9k_hw_configpcipowersave(ah, false);
 
-	ah->wow_event_mask = 0;
+	ah->wow.wow_event_mask = 0;
 
 	return wow_status;
 }
@@ -235,7 +235,7 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 	 * are from the 'pattern_enable' in this function and
 	 * 'pattern_count' of ath9k_hw_wow_apply_pattern()
 	 */
-	wow_event_mask = ah->wow_event_mask;
+	wow_event_mask = ah->wow.wow_event_mask;
 
 	/*
 	 * Untie Power-on-Reset from the PCI-E-Reset. When we are in
@@ -402,6 +402,6 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
 
 	ath9k_hw_set_powermode_wow_sleep(ah);
-	ah->wow_event_mask = wow_event_mask;
+	ah->wow.wow_event_mask = wow_event_mask;
 }
 EXPORT_SYMBOL(ath9k_hw_wow_enable);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 22b0422..d36210a 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -270,6 +270,10 @@ enum ath9k_hw_caps {
  * of those types.
  */
 
+struct ath9k_hw_wow {
+	u32 wow_event_mask;
+};
+
 struct ath9k_hw_capabilities {
 	u32 hw_caps; /* ATH9K_HW_CAP_* from ath9k_hw_caps */
 	u16 rts_aggr_limit;
@@ -928,7 +932,7 @@ struct ath_hw {
 	u32 ent_mode;
 
 #ifdef CONFIG_ATH9K_WOW
-	u32 wow_event_mask;
+	struct ath9k_hw_wow wow;
 #endif
 	bool is_clk_25mhz;
 	int (*get_mac_revision)(void);
-- 
cgit v1.1


From 12a444224479597cf49d49aed109389f6da4f2d8 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:33 +0530
Subject: ath9k: Register max WOW patterns

Since the number of patterns that can be configured in
the HW is higher for newer chips, store the chip-specific
value in ath9k_hw_wow.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/hw.c | 7 +++++++
 drivers/net/wireless/ath/ath9k/hw.h | 4 +++-
 2 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8c2f9e2..60aa8d7 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -2548,6 +2548,13 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	    ah->eep_ops->get_eeprom(ah, EEP_PAPRD))
 			pCap->hw_caps |= ATH9K_HW_CAP_PAPRD;
 
+#ifdef CONFIG_ATH9K_WOW
+	if (AR_SREV_9462_20_OR_LATER(ah) || AR_SREV_9565_11_OR_LATER(ah))
+		ah->wow.max_patterns = MAX_NUM_PATTERN;
+	else
+		ah->wow.max_patterns = MAX_NUM_PATTERN_LEGACY;
+#endif
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index d36210a..e1801c9 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -204,7 +204,8 @@
 
 #define MAX_PATTERN_SIZE		256
 #define MAX_PATTERN_MASK_SIZE		32
-#define MAX_NUM_PATTERN			8
+#define MAX_NUM_PATTERN			16
+#define MAX_NUM_PATTERN_LEGACY		8
 #define MAX_NUM_USER_PATTERN		6 /*  deducting the disassociate and
 					      deauthenticate packets */
 
@@ -272,6 +273,7 @@ enum ath9k_hw_caps {
 
 struct ath9k_hw_wow {
 	u32 wow_event_mask;
+	u8 max_patterns;
 };
 
 struct ath9k_hw_capabilities {
-- 
cgit v1.1


From ce6e982bbc1e30ee21fd60c8d7ff238dad7be785 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:34 +0530
Subject: ath9k: Move WOW registers to reg_wow.h

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c |   1 +
 drivers/net/wireless/ath/ath9k/reg.h        | 120 ------------------------
 drivers/net/wireless/ath/ath9k/reg_wow.h    | 136 ++++++++++++++++++++++++++++
 3 files changed, 137 insertions(+), 120 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/reg_wow.h

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
index bb61417..6681a7b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_wow.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -17,6 +17,7 @@
 #include <linux/export.h>
 #include "ath9k.h"
 #include "reg.h"
+#include "reg_wow.h"
 #include "hw-ops.h"
 
 static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 3c0b180..b1b803d 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -2010,126 +2010,6 @@ enum {
 
 #define AR_WOW_BEACON_TIMO_MAX		0xffffffff
 
-/*
- * MAC WoW Registers
- */
-
-#define AR_WOW_PATTERN			0x825C
-#define AR_WOW_COUNT			0x8260
-#define AR_WOW_BCN_EN			0x8270
-#define AR_WOW_BCN_TIMO			0x8274
-#define AR_WOW_KEEP_ALIVE_TIMO		0x8278
-#define AR_WOW_KEEP_ALIVE		0x827c
-#define AR_WOW_US_SCALAR		0x8284
-#define AR_WOW_KEEP_ALIVE_DELAY		0x8288
-#define AR_WOW_PATTERN_MATCH		0x828c
-#define AR_WOW_PATTERN_OFF1		0x8290	/* pattern bytes 0 -> 3 */
-#define AR_WOW_PATTERN_OFF2		0x8294	/* pattern bytes 4 -> 7 */
-
-/* for AR9285 or later version of chips */
-#define AR_WOW_EXACT			0x829c
-#define AR_WOW_LENGTH1			0x8360
-#define AR_WOW_LENGTH2			0X8364
-/* register to enable match for less than 256 bytes packets */
-#define AR_WOW_PATTERN_MATCH_LT_256B	0x8368
-
-#define AR_SW_WOW_CONTROL		0x20018
-#define AR_SW_WOW_ENABLE		0x1
-#define AR_SWITCH_TO_REFCLK		0x2
-#define AR_RESET_CONTROL		0x4
-#define AR_RESET_VALUE_MASK		0x8
-#define AR_HW_WOW_DISABLE		0x10
-#define AR_CLR_MAC_INTERRUPT		0x20
-#define AR_CLR_KA_INTERRUPT		0x40
-
-/* AR_WOW_PATTERN register values */
-#define AR_WOW_BACK_OFF_SHIFT(x)	((x & 0xf) << 28) /* in usecs */
-#define AR_WOW_MAC_INTR_EN		0x00040000
-#define AR_WOW_MAGIC_EN			0x00010000
-#define AR_WOW_PATTERN_EN(x)		(x & 0xff)
-#define AR_WOW_PAT_FOUND_SHIFT	8
-#define AR_WOW_PATTERN_FOUND(x)		(x & (0xff << AR_WOW_PAT_FOUND_SHIFT))
-#define AR_WOW_PATTERN_FOUND_MASK	((0xff) << AR_WOW_PAT_FOUND_SHIFT)
-#define AR_WOW_MAGIC_PAT_FOUND		0x00020000
-#define AR_WOW_MAC_INTR			0x00080000
-#define AR_WOW_KEEP_ALIVE_FAIL		0x00100000
-#define AR_WOW_BEACON_FAIL		0x00200000
-
-#define AR_WOW_STATUS(x)		(x & (AR_WOW_PATTERN_FOUND_MASK | \
-					      AR_WOW_MAGIC_PAT_FOUND	| \
-					      AR_WOW_KEEP_ALIVE_FAIL	| \
-					      AR_WOW_BEACON_FAIL))
-#define AR_WOW_CLEAR_EVENTS(x)		(x & ~(AR_WOW_PATTERN_EN(0xff) | \
-					       AR_WOW_MAGIC_EN | \
-					       AR_WOW_MAC_INTR_EN | \
-					       AR_WOW_BEACON_FAIL | \
-					       AR_WOW_KEEP_ALIVE_FAIL))
-
-/* AR_WOW_COUNT register values */
-#define AR_WOW_AIFS_CNT(x)		(x & 0xff)
-#define AR_WOW_SLOT_CNT(x)		((x & 0xff) << 8)
-#define AR_WOW_KEEP_ALIVE_CNT(x)	((x & 0xff) << 16)
-
-/* AR_WOW_BCN_EN register */
-#define AR_WOW_BEACON_FAIL_EN		0x00000001
-
-/* AR_WOW_BCN_TIMO rgister */
-#define AR_WOW_BEACON_TIMO		0x40000000 /* valid if BCN_EN is set */
-
-/* AR_WOW_KEEP_ALIVE_TIMO register */
-#define AR_WOW_KEEP_ALIVE_TIMO_VALUE
-#define AR_WOW_KEEP_ALIVE_NEVER		0xffffffff
-
-/* AR_WOW_KEEP_ALIVE register  */
-#define AR_WOW_KEEP_ALIVE_AUTO_DIS	0x00000001
-#define AR_WOW_KEEP_ALIVE_FAIL_DIS	0x00000002
-
-/* AR_WOW_KEEP_ALIVE_DELAY register */
-#define AR_WOW_KEEP_ALIVE_DELAY_VALUE	0x000003e8 /* 1 msec */
-
-
-/*
- * keep it long for beacon workaround - ensure no false alarm
- */
-#define AR_WOW_BMISSTHRESHOLD		0x20
-
-/* AR_WOW_PATTERN_MATCH register */
-#define AR_WOW_PAT_END_OF_PKT(x)	(x & 0xf)
-#define AR_WOW_PAT_OFF_MATCH(x)		((x & 0xf) << 8)
-
-/*
- * default values for Wow Configuration for backoff, aifs, slot, keep-alive
- * to be programmed into various registers.
- */
-#define AR_WOW_PAT_BACKOFF	0x00000004 /* AR_WOW_PATTERN_REG */
-#define AR_WOW_CNT_AIFS_CNT	0x00000022 /* AR_WOW_COUNT_REG */
-#define AR_WOW_CNT_SLOT_CNT	0x00000009 /* AR_WOW_COUNT_REG */
-/*
- * Keepalive count applicable for AR9280 2.0 and above.
- */
-#define AR_WOW_CNT_KA_CNT 0x00000008    /* AR_WOW_COUNT register */
-
-/* WoW - Transmit buffer for keep alive frames */
-#define AR_WOW_TRANSMIT_BUFFER	0xe000 /* E000 - EFFC */
-
-#define AR_WOW_TXBUF(i)		(AR_WOW_TRANSMIT_BUFFER + ((i) << 2))
-
-#define AR_WOW_KA_DESC_WORD2	0xe000
-
-#define AR_WOW_KA_DATA_WORD0	0xe030
-
-/* WoW Transmit Buffer for patterns */
-#define AR_WOW_TB_PATTERN(i)	(0xe100 + (i << 8))
-#define AR_WOW_TB_MASK(i)	(0xec00 + (i << 5))
-
-/* Currently Pattern 0-7 are supported - so bit 0-7 are set */
-#define AR_WOW_PATTERN_SUPPORTED	0xff
-#define AR_WOW_LENGTH_MAX		0xff
-#define AR_WOW_LEN1_SHIFT(_i)	((0x3 - ((_i) & 0x3)) << 0x3)
-#define AR_WOW_LENGTH1_MASK(_i)	(AR_WOW_LENGTH_MAX << AR_WOW_LEN1_SHIFT(_i))
-#define AR_WOW_LEN2_SHIFT(_i)	((0x7 - ((_i) & 0x7)) << 0x3)
-#define AR_WOW_LENGTH2_MASK(_i)	(AR_WOW_LENGTH_MAX << AR_WOW_LEN2_SHIFT(_i))
-
 #define AR9271_CORE_CLOCK	117   /* clock to 117Mhz */
 #define AR9271_TARGET_BAUD_RATE	19200 /* 115200 */
 
diff --git a/drivers/net/wireless/ath/ath9k/reg_wow.h b/drivers/net/wireless/ath/ath9k/reg_wow.h
new file mode 100644
index 0000000..3dbe5db
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/reg_wow.h
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2015 Qualcomm Atheros Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef REG_WOW_H
+#define REG_WOW_H
+
+#define AR_WOW_PATTERN                  0x825C
+#define AR_WOW_COUNT                    0x8260
+#define AR_WOW_BCN_EN                   0x8270
+#define AR_WOW_BCN_TIMO                 0x8274
+#define AR_WOW_KEEP_ALIVE_TIMO          0x8278
+#define AR_WOW_KEEP_ALIVE               0x827c
+#define AR_WOW_US_SCALAR                0x8284
+#define AR_WOW_KEEP_ALIVE_DELAY         0x8288
+#define AR_WOW_PATTERN_MATCH            0x828c
+#define AR_WOW_PATTERN_OFF1             0x8290  /* pattern bytes 0 -> 3 */
+#define AR_WOW_PATTERN_OFF2             0x8294  /* pattern bytes 4 -> 7 */
+
+/* for AR9285 or later version of chips */
+#define AR_WOW_EXACT                    0x829c
+#define AR_WOW_LENGTH1                  0x8360
+#define AR_WOW_LENGTH2                  0X8364
+/* register to enable match for less than 256 bytes packets */
+#define AR_WOW_PATTERN_MATCH_LT_256B    0x8368
+
+#define AR_SW_WOW_CONTROL               0x20018
+#define AR_SW_WOW_ENABLE                0x1
+#define AR_SWITCH_TO_REFCLK             0x2
+#define AR_RESET_CONTROL                0x4
+#define AR_RESET_VALUE_MASK             0x8
+#define AR_HW_WOW_DISABLE               0x10
+#define AR_CLR_MAC_INTERRUPT            0x20
+#define AR_CLR_KA_INTERRUPT             0x40
+
+/* AR_WOW_PATTERN register values */
+#define AR_WOW_BACK_OFF_SHIFT(x)        ((x & 0xf) << 28) /* in usecs */
+#define AR_WOW_MAC_INTR_EN              0x00040000
+#define AR_WOW_MAGIC_EN                 0x00010000
+#define AR_WOW_PATTERN_EN(x)            (x & 0xff)
+#define AR_WOW_PAT_FOUND_SHIFT  8
+#define AR_WOW_PATTERN_FOUND(x)         (x & (0xff << AR_WOW_PAT_FOUND_SHIFT))
+#define AR_WOW_PATTERN_FOUND_MASK       ((0xff) << AR_WOW_PAT_FOUND_SHIFT)
+#define AR_WOW_MAGIC_PAT_FOUND          0x00020000
+#define AR_WOW_MAC_INTR                 0x00080000
+#define AR_WOW_KEEP_ALIVE_FAIL          0x00100000
+#define AR_WOW_BEACON_FAIL              0x00200000
+
+#define AR_WOW_STATUS(x)                (x & (AR_WOW_PATTERN_FOUND_MASK | \
+                                              AR_WOW_MAGIC_PAT_FOUND    | \
+                                              AR_WOW_KEEP_ALIVE_FAIL    | \
+                                              AR_WOW_BEACON_FAIL))
+#define AR_WOW_CLEAR_EVENTS(x)          (x & ~(AR_WOW_PATTERN_EN(0xff) | \
+                                               AR_WOW_MAGIC_EN |	\
+                                               AR_WOW_MAC_INTR_EN |	\
+                                               AR_WOW_BEACON_FAIL |	\
+                                               AR_WOW_KEEP_ALIVE_FAIL))
+
+/* AR_WOW_COUNT register values */
+#define AR_WOW_AIFS_CNT(x)              (x & 0xff)
+#define AR_WOW_SLOT_CNT(x)              ((x & 0xff) << 8)
+#define AR_WOW_KEEP_ALIVE_CNT(x)        ((x & 0xff) << 16)
+
+/* AR_WOW_BCN_EN register */
+#define AR_WOW_BEACON_FAIL_EN           0x00000001
+
+/* AR_WOW_BCN_TIMO rgister */
+#define AR_WOW_BEACON_TIMO              0x40000000 /* valid if BCN_EN is set */
+
+/* AR_WOW_KEEP_ALIVE_TIMO register */
+#define AR_WOW_KEEP_ALIVE_TIMO_VALUE
+#define AR_WOW_KEEP_ALIVE_NEVER         0xffffffff
+
+/* AR_WOW_KEEP_ALIVE register  */
+#define AR_WOW_KEEP_ALIVE_AUTO_DIS      0x00000001
+#define AR_WOW_KEEP_ALIVE_FAIL_DIS      0x00000002
+
+/* AR_WOW_KEEP_ALIVE_DELAY register */
+#define AR_WOW_KEEP_ALIVE_DELAY_VALUE   0x000003e8 /* 1 msec */
+
+
+/*
+ * keep it long for beacon workaround - ensure no false alarm
+ */
+#define AR_WOW_BMISSTHRESHOLD           0x20
+
+/* AR_WOW_PATTERN_MATCH register */
+#define AR_WOW_PAT_END_OF_PKT(x)        (x & 0xf)
+#define AR_WOW_PAT_OFF_MATCH(x)         ((x & 0xf) << 8)
+
+/*
+ * default values for Wow Configuration for backoff, aifs, slot, keep-alive
+ * to be programmed into various registers.
+ */
+#define AR_WOW_PAT_BACKOFF      0x00000004 /* AR_WOW_PATTERN_REG */
+#define AR_WOW_CNT_AIFS_CNT     0x00000022 /* AR_WOW_COUNT_REG */
+#define AR_WOW_CNT_SLOT_CNT     0x00000009 /* AR_WOW_COUNT_REG */
+/*
+ * Keepalive count applicable for AR9280 2.0 and above.
+ */
+#define AR_WOW_CNT_KA_CNT 0x00000008    /* AR_WOW_COUNT register */
+
+/* WoW - Transmit buffer for keep alive frames */
+#define AR_WOW_TRANSMIT_BUFFER  0xe000 /* E000 - EFFC */
+
+#define AR_WOW_TXBUF(i)         (AR_WOW_TRANSMIT_BUFFER + ((i) << 2))
+
+#define AR_WOW_KA_DESC_WORD2    0xe000
+
+#define AR_WOW_KA_DATA_WORD0    0xe030
+
+/* WoW Transmit Buffer for patterns */
+#define AR_WOW_TB_PATTERN(i)    (0xe100 + (i << 8))
+#define AR_WOW_TB_MASK(i)       (0xec00 + (i << 5))
+
+/* Currently Pattern 0-7 are supported - so bit 0-7 are set */
+#define AR_WOW_PATTERN_SUPPORTED        0xff
+#define AR_WOW_LENGTH_MAX               0xff
+#define AR_WOW_LEN1_SHIFT(_i)   ((0x3 - ((_i) & 0x3)) << 0x3)
+#define AR_WOW_LENGTH1_MASK(_i) (AR_WOW_LENGTH_MAX << AR_WOW_LEN1_SHIFT(_i))
+#define AR_WOW_LEN2_SHIFT(_i)   ((0x7 - ((_i) & 0x7)) << 0x3)
+#define AR_WOW_LENGTH2_MASK(_i) (AR_WOW_LENGTH_MAX << AR_WOW_LEN2_SHIFT(_i))
+
+#endif /* REG_WOW_H */
-- 
cgit v1.1


From c65fb2637a5c772faaea50e19813bb52e66b0006 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:35 +0530
Subject: ath9k: Remove incorrect register macros

These macros are applicable to pre-AR9003 chips
and the addresses are different for the AR9003
family. Since they are unused anyway, remove them.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/reg_wow.h | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/reg_wow.h b/drivers/net/wireless/ath/ath9k/reg_wow.h
index 3dbe5db..780553a 100644
--- a/drivers/net/wireless/ath/ath9k/reg_wow.h
+++ b/drivers/net/wireless/ath/ath9k/reg_wow.h
@@ -23,14 +23,9 @@
 #define AR_WOW_BCN_TIMO                 0x8274
 #define AR_WOW_KEEP_ALIVE_TIMO          0x8278
 #define AR_WOW_KEEP_ALIVE               0x827c
-#define AR_WOW_US_SCALAR                0x8284
 #define AR_WOW_KEEP_ALIVE_DELAY         0x8288
 #define AR_WOW_PATTERN_MATCH            0x828c
-#define AR_WOW_PATTERN_OFF1             0x8290  /* pattern bytes 0 -> 3 */
-#define AR_WOW_PATTERN_OFF2             0x8294  /* pattern bytes 4 -> 7 */
 
-/* for AR9285 or later version of chips */
-#define AR_WOW_EXACT                    0x829c
 #define AR_WOW_LENGTH1                  0x8360
 #define AR_WOW_LENGTH2                  0X8364
 /* register to enable match for less than 256 bytes packets */
-- 
cgit v1.1


From 404033c16c0a739fba8a5f00a306e33e3a367d19 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:36 +0530
Subject: ath9k: Cleanup reg_wow.h

* Remove unnecessary comments.
* Remove unused macros.
* Indent the macros.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/reg_wow.h | 68 +++++++-------------------------
 1 file changed, 15 insertions(+), 53 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/reg_wow.h b/drivers/net/wireless/ath/ath9k/reg_wow.h
index 780553a..e6de4a3 100644
--- a/drivers/net/wireless/ath/ath9k/reg_wow.h
+++ b/drivers/net/wireless/ath/ath9k/reg_wow.h
@@ -25,10 +25,8 @@
 #define AR_WOW_KEEP_ALIVE               0x827c
 #define AR_WOW_KEEP_ALIVE_DELAY         0x8288
 #define AR_WOW_PATTERN_MATCH            0x828c
-
 #define AR_WOW_LENGTH1                  0x8360
 #define AR_WOW_LENGTH2                  0X8364
-/* register to enable match for less than 256 bytes packets */
 #define AR_WOW_PATTERN_MATCH_LT_256B    0x8368
 
 #define AR_SW_WOW_CONTROL               0x20018
@@ -40,7 +38,6 @@
 #define AR_CLR_MAC_INTERRUPT            0x20
 #define AR_CLR_KA_INTERRUPT             0x40
 
-/* AR_WOW_PATTERN register values */
 #define AR_WOW_BACK_OFF_SHIFT(x)        ((x & 0xf) << 28) /* in usecs */
 #define AR_WOW_MAC_INTR_EN              0x00040000
 #define AR_WOW_MAGIC_EN                 0x00010000
@@ -63,69 +60,34 @@
                                                AR_WOW_BEACON_FAIL |	\
                                                AR_WOW_KEEP_ALIVE_FAIL))
 
-/* AR_WOW_COUNT register values */
 #define AR_WOW_AIFS_CNT(x)              (x & 0xff)
 #define AR_WOW_SLOT_CNT(x)              ((x & 0xff) << 8)
 #define AR_WOW_KEEP_ALIVE_CNT(x)        ((x & 0xff) << 16)
 
-/* AR_WOW_BCN_EN register */
 #define AR_WOW_BEACON_FAIL_EN           0x00000001
-
-/* AR_WOW_BCN_TIMO rgister */
-#define AR_WOW_BEACON_TIMO              0x40000000 /* valid if BCN_EN is set */
-
-/* AR_WOW_KEEP_ALIVE_TIMO register */
-#define AR_WOW_KEEP_ALIVE_TIMO_VALUE
+#define AR_WOW_BEACON_TIMO              0x40000000
 #define AR_WOW_KEEP_ALIVE_NEVER         0xffffffff
-
-/* AR_WOW_KEEP_ALIVE register  */
 #define AR_WOW_KEEP_ALIVE_AUTO_DIS      0x00000001
 #define AR_WOW_KEEP_ALIVE_FAIL_DIS      0x00000002
-
-/* AR_WOW_KEEP_ALIVE_DELAY register */
 #define AR_WOW_KEEP_ALIVE_DELAY_VALUE   0x000003e8 /* 1 msec */
-
-
-/*
- * keep it long for beacon workaround - ensure no false alarm
- */
 #define AR_WOW_BMISSTHRESHOLD           0x20
-
-/* AR_WOW_PATTERN_MATCH register */
 #define AR_WOW_PAT_END_OF_PKT(x)        (x & 0xf)
 #define AR_WOW_PAT_OFF_MATCH(x)         ((x & 0xf) << 8)
-
-/*
- * default values for Wow Configuration for backoff, aifs, slot, keep-alive
- * to be programmed into various registers.
- */
-#define AR_WOW_PAT_BACKOFF      0x00000004 /* AR_WOW_PATTERN_REG */
-#define AR_WOW_CNT_AIFS_CNT     0x00000022 /* AR_WOW_COUNT_REG */
-#define AR_WOW_CNT_SLOT_CNT     0x00000009 /* AR_WOW_COUNT_REG */
-/*
- * Keepalive count applicable for AR9280 2.0 and above.
- */
-#define AR_WOW_CNT_KA_CNT 0x00000008    /* AR_WOW_COUNT register */
-
-/* WoW - Transmit buffer for keep alive frames */
-#define AR_WOW_TRANSMIT_BUFFER  0xe000 /* E000 - EFFC */
-
-#define AR_WOW_TXBUF(i)         (AR_WOW_TRANSMIT_BUFFER + ((i) << 2))
-
-#define AR_WOW_KA_DESC_WORD2    0xe000
-
-#define AR_WOW_KA_DATA_WORD0    0xe030
-
-/* WoW Transmit Buffer for patterns */
-#define AR_WOW_TB_PATTERN(i)    (0xe100 + (i << 8))
-#define AR_WOW_TB_MASK(i)       (0xec00 + (i << 5))
-
-/* Currently Pattern 0-7 are supported - so bit 0-7 are set */
+#define AR_WOW_PAT_BACKOFF              0x00000004
+#define AR_WOW_CNT_AIFS_CNT             0x00000022
+#define AR_WOW_CNT_SLOT_CNT             0x00000009
+#define AR_WOW_CNT_KA_CNT               0x00000008
+
+#define AR_WOW_TRANSMIT_BUFFER          0xe000
+#define AR_WOW_TXBUF(i)                 (AR_WOW_TRANSMIT_BUFFER + ((i) << 2))
+#define AR_WOW_KA_DESC_WORD2            0xe000
+#define AR_WOW_TB_PATTERN(i)            (0xe100 + (i << 8))
+#define AR_WOW_TB_MASK(i)               (0xec00 + (i << 5))
 #define AR_WOW_PATTERN_SUPPORTED        0xff
 #define AR_WOW_LENGTH_MAX               0xff
-#define AR_WOW_LEN1_SHIFT(_i)   ((0x3 - ((_i) & 0x3)) << 0x3)
-#define AR_WOW_LENGTH1_MASK(_i) (AR_WOW_LENGTH_MAX << AR_WOW_LEN1_SHIFT(_i))
-#define AR_WOW_LEN2_SHIFT(_i)   ((0x7 - ((_i) & 0x7)) << 0x3)
-#define AR_WOW_LENGTH2_MASK(_i) (AR_WOW_LENGTH_MAX << AR_WOW_LEN2_SHIFT(_i))
+#define AR_WOW_LEN1_SHIFT(_i)           ((0x3 - ((_i) & 0x3)) << 0x3)
+#define AR_WOW_LENGTH1_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN1_SHIFT(_i))
+#define AR_WOW_LEN2_SHIFT(_i)           ((0x7 - ((_i) & 0x7)) << 0x3)
+#define AR_WOW_LENGTH2_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN2_SHIFT(_i))
 
 #endif /* REG_WOW_H */
-- 
cgit v1.1


From 6af75e4da330bf7ead84566275a9b49fe471bb4d Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Fri, 30 Jan 2015 19:05:37 +0530
Subject: ath9k: Fix max pattern check

Since the maximum number of configurable patterns
is chip-specific, use the HW capability instead
of a fixed value for checking if a free pattern
slot is available.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 12 +++----
 drivers/net/wireless/ath/ath9k/hw.h         | 17 ++++-----
 drivers/net/wireless/ath/ath9k/wow.c        | 53 ++++++++++++++++++++---------
 3 files changed, 51 insertions(+), 31 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
index 6681a7b..d2a4f6f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_wow.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -89,17 +89,16 @@ static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
 
 }
 
-void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
-				u8 *user_mask, int pattern_count,
-				int pattern_len)
+int ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
+			       u8 *user_mask, int pattern_count,
+			       int pattern_len)
 {
 	int i;
 	u32 pattern_val, mask_val;
 	u32 set, clr;
 
-	/* FIXME: should check count by querying the hardware capability */
-	if (pattern_count >= MAX_NUM_PATTERN)
-		return;
+	if (pattern_count >= ah->wow.max_patterns)
+		return -ENOSPC;
 
 	REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
 
@@ -154,6 +153,7 @@ void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
 		REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
 	}
 
+	return 0;
 }
 EXPORT_SYMBOL(ath9k_hw_wow_apply_pattern);
 
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index e1801c9..f51a28f 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1152,18 +1152,19 @@ ath9k_hw_get_btcoex_scheme(struct ath_hw *ah)
 
 
 #ifdef CONFIG_ATH9K_WOW
-void ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
-				u8 *user_mask, int pattern_count,
-				int pattern_len);
+int ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
+			       u8 *user_mask, int pattern_count,
+			       int pattern_len);
 u32 ath9k_hw_wow_wakeup(struct ath_hw *ah);
 void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable);
 #else
-static inline void ath9k_hw_wow_apply_pattern(struct ath_hw *ah,
-					      u8 *user_pattern,
-					      u8 *user_mask,
-					      int pattern_count,
-					      int pattern_len)
+static inline int ath9k_hw_wow_apply_pattern(struct ath_hw *ah,
+					     u8 *user_pattern,
+					     u8 *user_mask,
+					     int pattern_count,
+					     int pattern_len)
 {
+	return 0;
 }
 static inline u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
 {
diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index da52b1f..5092939 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -40,12 +40,12 @@ static u8 ath9k_wow_map_triggers(struct ath_softc *sc,
 	return wow_triggers;
 }
 
-static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
+static int ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	int pattern_count = 0;
-	int i, byte_cnt = 0;
+	int ret, i, byte_cnt = 0;
 	u8 dis_deauth_pattern[MAX_PATTERN_SIZE];
 	u8 dis_deauth_mask[MAX_PATTERN_SIZE];
 
@@ -110,8 +110,10 @@ static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
 	dis_deauth_mask[1] = 0x03;
 	dis_deauth_mask[2] = 0xc0;
 
-	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
-				   pattern_count, byte_cnt);
+	ret = ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+					 pattern_count, byte_cnt);
+	if (ret)
+		goto exit;
 
 	pattern_count++;
 	/*
@@ -120,18 +122,20 @@ static void ath9k_wow_add_disassoc_deauth_pattern(struct ath_softc *sc)
 	 */
 	dis_deauth_pattern[0] = 0xC0;
 
-	ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
-				   pattern_count, byte_cnt);
+	ret = ath9k_hw_wow_apply_pattern(ah, dis_deauth_pattern, dis_deauth_mask,
+					 pattern_count, byte_cnt);
+exit:
+	return ret;
 }
 
-static void ath9k_wow_add_pattern(struct ath_softc *sc,
-				  struct cfg80211_wowlan *wowlan)
+static int ath9k_wow_add_pattern(struct ath_softc *sc,
+				 struct cfg80211_wowlan *wowlan)
 {
 	struct ath_hw *ah = sc->sc_ah;
 	struct cfg80211_pkt_pattern *patterns = wowlan->patterns;
 	u8 wow_pattern[MAX_PATTERN_SIZE];
 	u8 wow_mask[MAX_PATTERN_SIZE];
-	int mask_len;
+	int mask_len, ret = 0;
 	s8 i = 0;
 
 	for (i = 0; i < wowlan->n_patterns; i++) {
@@ -141,12 +145,16 @@ static void ath9k_wow_add_pattern(struct ath_softc *sc,
 		memcpy(wow_pattern, patterns[i].pattern, patterns[i].pattern_len);
 		memcpy(wow_mask, patterns[i].mask, mask_len);
 
-		ath9k_hw_wow_apply_pattern(ah,
-					   wow_pattern,
-					   wow_mask,
-					   i + 2,
-					   patterns[i].pattern_len);
+		ret = ath9k_hw_wow_apply_pattern(ah,
+						 wow_pattern,
+						 wow_mask,
+						 i + 2,
+						 patterns[i].pattern_len);
+		if (ret)
+			break;
 	}
+
+	return ret;
 }
 
 int ath9k_suspend(struct ieee80211_hw *hw,
@@ -213,10 +221,21 @@ int ath9k_suspend(struct ieee80211_hw *hw,
 	 * Enable wake up on recieving disassoc/deauth
 	 * frame by default.
 	 */
-	ath9k_wow_add_disassoc_deauth_pattern(sc);
+	ret = ath9k_wow_add_disassoc_deauth_pattern(sc);
+	if (ret) {
+		ath_err(common,
+			"Unable to add disassoc/deauth pattern: %d\n", ret);
+		goto fail_wow;
+	}
 
-	if (triggers & AH_WOW_USER_PATTERN_EN)
-		ath9k_wow_add_pattern(sc, wowlan);
+	if (triggers & AH_WOW_USER_PATTERN_EN) {
+		ret = ath9k_wow_add_pattern(sc, wowlan);
+		if (ret) {
+			ath_err(common,
+				"Unable to add user pattern: %d\n", ret);
+			goto fail_wow;
+		}
+	}
 
 	spin_lock_bh(&sc->sc_pcu_lock);
 	/*
-- 
cgit v1.1


From a3c74902082c0e77aaf1065b5489867508db44ca Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 1 Feb 2015 10:55:11 +0200
Subject: wil6210: remove old Tx work-around

In the Tx, work around used to force destination index 0
to be used. This is no more necessary, as firmware supports
multiple destinations

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 0499ebc..24c4b9a 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -873,9 +873,6 @@ static int wil_tx_desc_map(struct vring_tx_desc *d, dma_addr_t pa, u32 len,
 	d->mac.d[1] = 0;
 	d->mac.d[2] = 0;
 	d->mac.ucode_cmd = 0;
-	/* use dst index 0 */
-	d->mac.d[1] |= BIT(MAC_CFG_DESC_TX_1_DST_INDEX_EN_POS) |
-		       (0 << MAC_CFG_DESC_TX_1_DST_INDEX_POS);
 	/* translation type:  0 - bypass; 1 - 802.3; 2 - native wifi */
 	d->mac.d[2] = BIT(MAC_CFG_DESC_TX_2_SNAP_HDR_INSERTION_EN_POS) |
 		      (1 << MAC_CFG_DESC_TX_2_L2_TRANSLATION_TYPE_POS);
-- 
cgit v1.1


From e59d16c08b3aa147f5c3c664d5dfda77fa93a827 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 1 Feb 2015 10:55:12 +0200
Subject: wil6210: avoid Tx descriptor double write

Non-cacheable Tx descriptor for the last fragment of
multi-fragment frame used to be written back twice.

Refactor code to always write non-cacheable descriptor
only once

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 24c4b9a..e37cab1 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -981,8 +981,6 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 
 	vring->ctx[i].nr_frags = nr_frags;
 	wil_tx_desc_set_nr_frags(d, nr_frags);
-	if (nr_frags)
-		*_d = *d;
 
 	/* middle segments */
 	for (; f < nr_frags; f++) {
@@ -990,6 +988,7 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 				&skb_shinfo(skb)->frags[f];
 		int len = skb_frag_size(frag);
 
+		*_d = *d;
 		i = (swhead + f + 1) % vring->size;
 		_d = &vring->va[i].tx;
 		pa = skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag),
@@ -1003,7 +1002,6 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 		 * it will succeed here too
 		 */
 		wil_tx_desc_offload_cksum_set(wil, d, skb);
-		*_d = *d;
 	}
 	/* for the last seg only */
 	d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_EOP_POS);
-- 
cgit v1.1


From 5933a06dc96cad21b7c125995791c93a86be7915 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 1 Feb 2015 10:55:13 +0200
Subject: wil6210: fix race between xmit and Tx vring de-allocation

Use spinlock, this should not impact Tx as lock is always free
except for de-allocation.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/txrx.c    | 25 ++++++++++++++++++++++---
 drivers/net/wireless/ath/wil6210/wil6210.h |  1 +
 2 files changed, 23 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index e37cab1..85ecea2 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -671,6 +671,7 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
 	}
 
 	memset(txdata, 0, sizeof(*txdata));
+	spin_lock_init(&txdata->lock);
 	vring->size = size;
 	rc = wil_vring_alloc(wil, vring);
 	if (rc)
@@ -718,8 +719,10 @@ void wil_vring_fini_tx(struct wil6210_priv *wil, int id)
 
 	wil_dbg_misc(wil, "%s() id=%d\n", __func__, id);
 
+	spin_lock_bh(&txdata->lock);
+	txdata->enabled = 0; /* no Tx can be in progress or start anew */
+	spin_unlock_bh(&txdata->lock);
 	/* make sure NAPI won't touch this vring */
-	wil->vring_tx_data[id].enabled = 0;
 	if (test_bit(wil_status_napi_en, wil->status))
 		napi_synchronize(&wil->napi_tx);
 
@@ -935,8 +938,8 @@ static int wil_tx_desc_offload_cksum_set(struct wil6210_priv *wil,
 	return 0;
 }
 
-static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
-			struct sk_buff *skb)
+static int __wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
+			  struct sk_buff *skb)
 {
 	struct device *dev = wil_to_dev(wil);
 	struct vring_tx_desc dd, *d = &dd;
@@ -952,6 +955,9 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 
 	wil_dbg_txrx(wil, "%s()\n", __func__);
 
+	if (unlikely(!txdata->enabled))
+		return -EINVAL;
+
 	if (avail < 1 + nr_frags) {
 		wil_err_ratelimited(wil,
 				    "Tx ring full. No space for %d fragments\n",
@@ -1050,6 +1056,19 @@ static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 	return -EINVAL;
 }
 
+static int wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
+			struct sk_buff *skb)
+{
+	int vring_index = vring - wil->vring_tx;
+	struct vring_tx_data *txdata = &wil->vring_tx_data[vring_index];
+	int rc;
+
+	spin_lock(&txdata->lock);
+	rc = __wil_tx_vring(wil, vring, skb);
+	spin_unlock(&txdata->lock);
+	return rc;
+}
+
 netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
 	struct wil6210_priv *wil = ndev_to_wil(ndev);
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 90dc24f..9461156 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -385,6 +385,7 @@ struct vring_tx_data {
 	u16 agg_timeout;
 	u8 agg_amsdu;
 	bool addba_in_progress; /* if set, agg_xxx is for request in progress */
+	spinlock_t lock;
 };
 
 enum { /* for wil6210_priv.status */
-- 
cgit v1.1


From 5b29c573f3dcb22534489194ba97aeb495cc65ca Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 1 Feb 2015 10:55:14 +0200
Subject: wil6210: more Tx debug

Print Tx descriptors
Print ring index for all Tx related messages
Sort prefixes: Tx for transmit, TxC for completion, added "D"
for descriptor related prints

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 85ecea2..8439f65 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -960,16 +960,16 @@ static int __wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 
 	if (avail < 1 + nr_frags) {
 		wil_err_ratelimited(wil,
-				    "Tx ring full. No space for %d fragments\n",
-				    1 + nr_frags);
+				    "Tx ring[%2d] full. No space for %d fragments\n",
+				    vring_index, 1 + nr_frags);
 		return -ENOMEM;
 	}
 	_d = &vring->va[i].tx;
 
 	pa = dma_map_single(dev, skb->data, skb_headlen(skb), DMA_TO_DEVICE);
 
-	wil_dbg_txrx(wil, "Tx skb %d bytes 0x%p -> %pad\n", skb_headlen(skb),
-		     skb->data, &pa);
+	wil_dbg_txrx(wil, "Tx[%2d] skb %d bytes 0x%p -> %pad\n", vring_index,
+		     skb_headlen(skb), skb->data, &pa);
 	wil_hex_dump_txrx("Tx ", DUMP_PREFIX_OFFSET, 16, 1,
 			  skb->data, skb_headlen(skb), false);
 
@@ -980,7 +980,7 @@ static int __wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 	wil_tx_desc_map(d, pa, skb_headlen(skb), vring_index);
 	/* Process TCP/UDP checksum offloading */
 	if (wil_tx_desc_offload_cksum_set(wil, d, skb)) {
-		wil_err(wil, "VRING #%d Failed to set cksum, drop packet\n",
+		wil_err(wil, "Tx[%2d] Failed to set cksum, drop packet\n",
 			vring_index);
 		goto dma_error;
 	}
@@ -995,6 +995,9 @@ static int __wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 		int len = skb_frag_size(frag);
 
 		*_d = *d;
+		wil_dbg_txrx(wil, "Tx[%2d] desc[%4d]\n", vring_index, i);
+		wil_hex_dump_txrx("TxD ", DUMP_PREFIX_NONE, 32, 4,
+				  (const void *)d, sizeof(*d), false);
 		i = (swhead + f + 1) % vring->size;
 		_d = &vring->va[i].tx;
 		pa = skb_frag_dma_map(dev, frag, 0, skb_frag_size(frag),
@@ -1014,6 +1017,9 @@ static int __wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 	d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_MARK_WB_POS);
 	d->dma.d0 |= BIT(DMA_CFG_DESC_TX_0_CMD_DMA_IT_POS);
 	*_d = *d;
+	wil_dbg_txrx(wil, "Tx[%2d] desc[%4d]\n", vring_index, i);
+	wil_hex_dump_txrx("TxD ", DUMP_PREFIX_NONE, 32, 4,
+			  (const void *)d, sizeof(*d), false);
 
 	/* hold reference to skb
 	 * to prevent skb release before accounting
@@ -1021,15 +1027,13 @@ static int __wil_tx_vring(struct wil6210_priv *wil, struct vring *vring,
 	 */
 	vring->ctx[i].skb = skb_get(skb);
 
-	wil_hex_dump_txrx("Tx ", DUMP_PREFIX_NONE, 32, 4,
-			  (const void *)d, sizeof(*d), false);
-
 	if (wil_vring_is_empty(vring)) /* performance monitoring */
 		txdata->idle += get_cycles() - txdata->last_idle;
 
 	/* advance swhead */
 	wil_vring_advance_head(vring, nr_frags + 1);
-	wil_dbg_txrx(wil, "Tx swhead %d -> %d\n", swhead, vring->swhead);
+	wil_dbg_txrx(wil, "Tx[%2d] swhead %d -> %d\n", vring_index, swhead,
+		     vring->swhead);
 	trace_wil6210_tx(vring_index, swhead, skb->len, nr_frags);
 	iowrite32(vring->swhead, wil->csr + HOSTADDR(vring->hwtail));
 
@@ -1211,10 +1215,10 @@ int wil_tx_complete(struct wil6210_priv *wil, int ringid)
 			trace_wil6210_tx_done(ringid, vring->swtail, dmalen,
 					      d->dma.error);
 			wil_dbg_txrx(wil,
-				     "Tx[%3d] : %d bytes, status 0x%02x err 0x%02x\n",
-				     vring->swtail, dmalen, d->dma.status,
-				     d->dma.error);
-			wil_hex_dump_txrx("TxC ", DUMP_PREFIX_NONE, 32, 4,
+				     "TxC[%2d][%3d] : %d bytes, status 0x%02x err 0x%02x\n",
+				     ringid, vring->swtail, dmalen,
+				     d->dma.status, d->dma.error);
+			wil_hex_dump_txrx("TxCD ", DUMP_PREFIX_NONE, 32, 4,
 					  (const void *)d, sizeof(*d), false);
 
 			wil_txdesc_unmap(dev, d, ctx);
-- 
cgit v1.1


From feeac225bed91c8da221e32a433780a5edcb14e8 Mon Sep 17 00:00:00 2001
From: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Date: Sun, 1 Feb 2015 10:55:15 +0200
Subject: wil6210: print ciphers in debug info

Print (at debug level) all cipher and AKM suites

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c | 37 +++++++++++++++++++----------
 1 file changed, 25 insertions(+), 12 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index e758f43..2d5ea21 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -334,6 +334,30 @@ out:
 	return rc;
 }
 
+static void wil_print_crypto(struct wil6210_priv *wil,
+			     struct cfg80211_crypto_settings *c)
+{
+	int i, n;
+
+	wil_dbg_misc(wil, "WPA versions: 0x%08x cipher group 0x%08x\n",
+		     c->wpa_versions, c->cipher_group);
+	wil_dbg_misc(wil, "Pairwise ciphers [%d] {\n", c->n_ciphers_pairwise);
+	n = min_t(int, c->n_ciphers_pairwise, ARRAY_SIZE(c->ciphers_pairwise));
+	for (i = 0; i < n; i++)
+		wil_dbg_misc(wil, "  [%d] = 0x%08x\n", i,
+			     c->ciphers_pairwise[i]);
+	wil_dbg_misc(wil, "}\n");
+	wil_dbg_misc(wil, "AKM suites [%d] {\n", c->n_akm_suites);
+	n = min_t(int, c->n_akm_suites, ARRAY_SIZE(c->akm_suites));
+	for (i = 0; i < n; i++)
+		wil_dbg_misc(wil, "  [%d] = 0x%08x\n", i,
+			     c->akm_suites[i]);
+	wil_dbg_misc(wil, "}\n");
+	wil_dbg_misc(wil, "Control port : %d, eth_type 0x%04x no_encrypt %d\n",
+		     c->control_port, be16_to_cpu(c->control_port_ethertype),
+		     c->control_port_no_encrypt);
+}
+
 static void wil_print_connect_params(struct wil6210_priv *wil,
 				     struct cfg80211_connect_params *sme)
 {
@@ -348,6 +372,7 @@ static void wil_print_connect_params(struct wil6210_priv *wil,
 		print_hex_dump(KERN_INFO, "  SSID: ", DUMP_PREFIX_OFFSET,
 			       16, 1, sme->ssid, sme->ssid_len, true);
 	wil_info(wil, "  Privacy: %s\n", sme->privacy ? "secure" : "open");
+	wil_print_crypto(wil, &sme->crypto);
 }
 
 static int wil_cfg80211_connect(struct wiphy *wiphy,
@@ -619,18 +644,6 @@ static void wil_print_bcon_data(struct cfg80211_beacon_data *b)
 			     b->assocresp_ies, b->assocresp_ies_len);
 }
 
-static void wil_print_crypto(struct wil6210_priv *wil,
-			     struct cfg80211_crypto_settings *c)
-{
-	wil_dbg_misc(wil, "WPA versions: 0x%08x cipher group 0x%08x\n",
-		     c->wpa_versions, c->cipher_group);
-	wil_dbg_misc(wil, "Pairwise ciphers [%d]\n", c->n_ciphers_pairwise);
-	wil_dbg_misc(wil, "AKM suites [%d]\n", c->n_akm_suites);
-	wil_dbg_misc(wil, "Control port : %d, eth_type 0x%04x no_encrypt %d\n",
-		     c->control_port, be16_to_cpu(c->control_port_ethertype),
-		     c->control_port_no_encrypt);
-}
-
 static int wil_fix_bcon(struct wil6210_priv *wil,
 			struct cfg80211_beacon_data *bcon)
 {
-- 
cgit v1.1


From 7201472ed376882927ecc0d917acec6cc1610c80 Mon Sep 17 00:00:00 2001
From: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Date: Sun, 1 Feb 2015 10:55:16 +0200
Subject: wil6210: Remove msm platform related code

Current implementation depends on msm-bus driver which
is not merged into mainline kernel therefore
this code is removed

Signed-off-by: Hamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/Kconfig           |   9 -
 drivers/net/wireless/ath/wil6210/Makefile          |   1 -
 drivers/net/wireless/ath/wil6210/wil_platform.c    |  12 +-
 .../net/wireless/ath/wil6210/wil_platform_msm.c    | 257 ---------------------
 .../net/wireless/ath/wil6210/wil_platform_msm.h    |  24 --
 5 files changed, 1 insertion(+), 302 deletions(-)
 delete mode 100644 drivers/net/wireless/ath/wil6210/wil_platform_msm.c
 delete mode 100644 drivers/net/wireless/ath/wil6210/wil_platform_msm.h

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/wil6210/Kconfig b/drivers/net/wireless/ath/wil6210/Kconfig
index 481680a..ce8c038 100644
--- a/drivers/net/wireless/ath/wil6210/Kconfig
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
@@ -39,12 +39,3 @@ config WIL6210_TRACING
 	  option if you are interested in debugging the driver.
 
 	  If unsure, say Y to make it easier to debug problems.
-
-config WIL6210_PLATFORM_MSM
-	bool "wil6210 MSM platform specific support"
-	depends on WIL6210
-	depends on ARCH_MSM
-	default y
-	---help---
-	  Say Y here to enable wil6210 driver support for MSM
-	  platform specific features
diff --git a/drivers/net/wireless/ath/wil6210/Makefile b/drivers/net/wireless/ath/wil6210/Makefile
index 8ad4b5f..caa717b 100644
--- a/drivers/net/wireless/ath/wil6210/Makefile
+++ b/drivers/net/wireless/ath/wil6210/Makefile
@@ -14,7 +14,6 @@ wil6210-y += ioctl.o
 wil6210-y += fw.o
 wil6210-$(CONFIG_WIL6210_TRACING) += trace.o
 wil6210-y += wil_platform.o
-wil6210-$(CONFIG_WIL6210_PLATFORM_MSM) += wil_platform_msm.o
 wil6210-y += ethtool.o
 
 # for tracing framework to find trace.h
diff --git a/drivers/net/wireless/ath/wil6210/wil_platform.c b/drivers/net/wireless/ath/wil6210/wil_platform.c
index 8f1d78f..976a071 100644
--- a/drivers/net/wireless/ath/wil6210/wil_platform.c
+++ b/drivers/net/wireless/ath/wil6210/wil_platform.c
@@ -17,10 +17,6 @@
 #include "linux/device.h"
 #include "wil_platform.h"
 
-#ifdef CONFIG_WIL6210_PLATFORM_MSM
-#include "wil_platform_msm.h"
-#endif
-
 /**
  * wil_platform_init() - wil6210 platform module init
  *
@@ -37,13 +33,7 @@ void *wil_platform_init(struct device *dev, struct wil_platform_ops *ops)
 		return NULL;
 	}
 
-#ifdef CONFIG_WIL6210_PLATFORM_MSM
-	handle = wil_platform_msm_init(dev, ops);
-	if (handle)
-		return handle;
-#endif
-
-	/* other platform specific init functions should be called here */
+	/* platform specific init functions should be called here */
 
 	return handle;
 }
diff --git a/drivers/net/wireless/ath/wil6210/wil_platform_msm.c b/drivers/net/wireless/ath/wil6210/wil_platform_msm.c
deleted file mode 100644
index b354a74..0000000
--- a/drivers/net/wireless/ath/wil6210/wil_platform_msm.c
+++ /dev/null
@@ -1,257 +0,0 @@
-/*
- * Copyright (c) 2014 Qualcomm Atheros, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/msm-bus.h>
-
-#include "wil_platform.h"
-#include "wil_platform_msm.h"
-
-/**
- * struct wil_platform_msm - wil6210 msm platform module info
- *
- * @dev: device object
- * @msm_bus_handle: handle for using msm_bus API
- * @pdata: bus scale info retrieved from DT
- */
-struct wil_platform_msm {
-	struct device *dev;
-	uint32_t msm_bus_handle;
-	struct msm_bus_scale_pdata *pdata;
-};
-
-#define KBTOB(a) (a * 1000ULL)
-
-/**
- * wil_platform_get_pdata() - Generate bus client data from device tree
- * provided by clients.
- *
- * dev: device object
- * of_node: Device tree node to extract information from
- *
- * The function returns a valid pointer to the allocated bus-scale-pdata
- * if the vectors were correctly read from the client's device node.
- * Any error in reading or parsing the device node will return NULL
- * to the caller.
- */
-static struct msm_bus_scale_pdata *wil_platform_get_pdata(
-		struct device *dev,
-		struct device_node *of_node)
-{
-	struct msm_bus_scale_pdata *pdata;
-	struct msm_bus_paths *usecase;
-	int i, j, ret, len;
-	unsigned int num_usecases, num_paths, mem_size;
-	const uint32_t *vec_arr;
-	struct msm_bus_vectors *vectors;
-
-	/* first read num_usecases and num_paths so we can calculate
-	 * amount of memory to allocate
-	 */
-	ret = of_property_read_u32(of_node, "qcom,msm-bus,num-cases",
-				   &num_usecases);
-	if (ret) {
-		dev_err(dev, "Error: num-usecases not found\n");
-		return NULL;
-	}
-
-	ret = of_property_read_u32(of_node, "qcom,msm-bus,num-paths",
-				   &num_paths);
-	if (ret) {
-		dev_err(dev, "Error: num_paths not found\n");
-		return NULL;
-	}
-
-	/* pdata memory layout:
-	 *   msm_bus_scale_pdata
-	 *   msm_bus_paths[num_usecases]
-	 *   msm_bus_vectors[num_usecases][num_paths]
-	 */
-	mem_size = sizeof(struct msm_bus_scale_pdata) +
-		   sizeof(struct msm_bus_paths) * num_usecases +
-		   sizeof(struct msm_bus_vectors) * num_usecases * num_paths;
-
-	pdata = kzalloc(mem_size, GFP_KERNEL);
-	if (!pdata)
-		return NULL;
-
-	ret = of_property_read_string(of_node, "qcom,msm-bus,name",
-				      &pdata->name);
-	if (ret) {
-		dev_err(dev, "Error: Client name not found\n");
-		goto err;
-	}
-
-	if (of_property_read_bool(of_node, "qcom,msm-bus,active-only")) {
-		pdata->active_only = 1;
-	} else {
-		dev_info(dev, "active_only flag absent.\n");
-		dev_info(dev, "Using dual context by default\n");
-	}
-
-	pdata->num_usecases = num_usecases;
-	pdata->usecase = (struct msm_bus_paths *)(pdata + 1);
-
-	vec_arr = of_get_property(of_node, "qcom,msm-bus,vectors-KBps", &len);
-	if (vec_arr == NULL) {
-		dev_err(dev, "Error: Vector array not found\n");
-		goto err;
-	}
-
-	if (len != num_usecases * num_paths * sizeof(uint32_t) * 4) {
-		dev_err(dev, "Error: Length-error on getting vectors\n");
-		goto err;
-	}
-
-	vectors = (struct msm_bus_vectors *)(pdata->usecase + num_usecases);
-	for (i = 0; i < num_usecases; i++) {
-		usecase = &pdata->usecase[i];
-		usecase->num_paths = num_paths;
-		usecase->vectors = &vectors[i];
-
-		for (j = 0; j < num_paths; j++) {
-			int index = ((i * num_paths) + j) * 4;
-
-			usecase->vectors[j].src = be32_to_cpu(vec_arr[index]);
-			usecase->vectors[j].dst =
-				be32_to_cpu(vec_arr[index + 1]);
-			usecase->vectors[j].ab = (uint64_t)
-				KBTOB(be32_to_cpu(vec_arr[index + 2]));
-			usecase->vectors[j].ib = (uint64_t)
-				KBTOB(be32_to_cpu(vec_arr[index + 3]));
-		}
-	}
-
-	return pdata;
-
-err:
-	kfree(pdata);
-
-	return NULL;
-}
-
-/* wil_platform API (callbacks) */
-
-static int wil_platform_bus_request(void *handle,
-				    uint32_t kbps /* KBytes/Sec */)
-{
-	int rc, i;
-	struct wil_platform_msm *msm = (struct wil_platform_msm *)handle;
-	int vote = 0; /* vote 0 in case requested kbps cannot be satisfied */
-	struct msm_bus_paths *usecase;
-	uint32_t usecase_kbps;
-	uint32_t min_kbps = ~0;
-
-	/* find the lowest usecase that is bigger than requested kbps */
-	for (i = 0; i < msm->pdata->num_usecases; i++) {
-		usecase = &msm->pdata->usecase[i];
-		/* assume we have single path (vectors[0]). If we ever
-		 * have multiple paths, need to define the behavior */
-		usecase_kbps = div64_u64(usecase->vectors[0].ib, 1000);
-		if (usecase_kbps >= kbps && usecase_kbps < min_kbps) {
-			min_kbps = usecase_kbps;
-			vote = i;
-		}
-	}
-
-	rc = msm_bus_scale_client_update_request(msm->msm_bus_handle, vote);
-	if (rc)
-		dev_err(msm->dev, "Failed msm_bus voting. kbps=%d vote=%d, rc=%d\n",
-			kbps, vote, rc);
-	else
-		/* TOOD: remove */
-		dev_info(msm->dev, "msm_bus_scale_client_update_request succeeded. kbps=%d vote=%d\n",
-			 kbps, vote);
-
-	return rc;
-}
-
-static void wil_platform_uninit(void *handle)
-{
-	struct wil_platform_msm *msm = (struct wil_platform_msm *)handle;
-
-	dev_info(msm->dev, "wil_platform_uninit\n");
-
-	if (msm->msm_bus_handle)
-		msm_bus_scale_unregister_client(msm->msm_bus_handle);
-
-	kfree(msm->pdata);
-	kfree(msm);
-}
-
-static int wil_platform_msm_bus_register(struct wil_platform_msm *msm,
-					 struct device_node *node)
-{
-	msm->pdata = wil_platform_get_pdata(msm->dev, node);
-	if (!msm->pdata) {
-		dev_err(msm->dev, "Failed getting DT info\n");
-		return -EINVAL;
-	}
-
-	msm->msm_bus_handle = msm_bus_scale_register_client(msm->pdata);
-	if (!msm->msm_bus_handle) {
-		dev_err(msm->dev, "Failed msm_bus registration\n");
-		return -EINVAL;
-	}
-
-	dev_info(msm->dev, "msm_bus registration succeeded! handle 0x%x\n",
-		 msm->msm_bus_handle);
-
-	return 0;
-}
-
-/**
- * wil_platform_msm_init() - wil6210 msm platform module init
- *
- * The function must be called before all other functions in this module.
- * It returns a handle which is used with the rest of the API
- *
- */
-void *wil_platform_msm_init(struct device *dev, struct wil_platform_ops *ops)
-{
-	struct device_node *of_node;
-	struct wil_platform_msm *msm;
-	int rc;
-
-	of_node = of_find_compatible_node(NULL, NULL, "qcom,wil6210");
-	if (!of_node) {
-		/* this could mean non-msm platform */
-		dev_err(dev, "DT node not found\n");
-		return NULL;
-	}
-
-	msm = kzalloc(sizeof(*msm), GFP_KERNEL);
-	if (!msm)
-		return NULL;
-
-	msm->dev = dev;
-
-	/* register with msm_bus module for scaling requests */
-	rc = wil_platform_msm_bus_register(msm, of_node);
-	if (rc)
-		goto cleanup;
-
-	memset(ops, 0, sizeof(*ops));
-	ops->bus_request = wil_platform_bus_request;
-	ops->uninit = wil_platform_uninit;
-
-	return (void *)msm;
-
-cleanup:
-	kfree(msm);
-	return NULL;
-}
diff --git a/drivers/net/wireless/ath/wil6210/wil_platform_msm.h b/drivers/net/wireless/ath/wil6210/wil_platform_msm.h
deleted file mode 100644
index 2f2229e..0000000
--- a/drivers/net/wireless/ath/wil6210/wil_platform_msm.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (c) 2014 Qualcomm Atheros, Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef __WIL_PLATFORM__MSM_H__
-#define __WIL_PLATFORM_MSM_H__
-
-#include "wil_platform.h"
-
-void *wil_platform_msm_init(struct device *dev, struct wil_platform_ops *ops);
-
-#endif /* __WIL_PLATFORM__MSM_H__ */
-- 
cgit v1.1


From 627613f8f081928efe2e82100f54c67e17bea72c Mon Sep 17 00:00:00 2001
From: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
Date: Thu, 29 Jan 2015 13:50:38 +0200
Subject: ath10k: prevent setting wrong key idx for station

Ath10k driver sets wrong default key idx that results in
sending unicast frames with multicast key.

The reason for this behavior is that cached broadcast key
is installed for station MAC address on association. After
dot1x completes, unicast key is installed for station
MAC address. Default key idx is set to broadcast key id when
driver tries to send broadcast frame. This causes firmware
to use broadcast key id to transmit unicast frames to stations.

Used TX_USAGE flag to set default key for stations.

Added callback for setting unicast default idx which will be
invoked on every default key idx configuration.

Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |   4 +-
 drivers/net/wireless/ath/ath10k/mac.c  | 161 +++++++++++++++------------------
 2 files changed, 72 insertions(+), 93 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index abb3203..a47b41d 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -285,10 +285,8 @@ struct ath10k_vif {
 	u32 aid;
 	u8 bssid[ETH_ALEN];
 
-	struct work_struct wep_key_work;
 	struct ieee80211_key_conf *wep_keys[WMI_MAX_KEY_INDEX + 1];
-	u8 def_wep_key_idx;
-	u8 def_wep_key_newidx;
+	s8 def_wep_key_idx;
 
 	u16 tx_seq_no;
 
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index f9440de..d3fe1a3 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -37,7 +37,7 @@
 static int ath10k_send_key(struct ath10k_vif *arvif,
 			   struct ieee80211_key_conf *key,
 			   enum set_key_cmd cmd,
-			   const u8 *macaddr)
+			   const u8 *macaddr, bool def_idx)
 {
 	struct ath10k *ar = arvif->ar;
 	struct wmi_vdev_install_key_arg arg = {
@@ -72,6 +72,9 @@ static int ath10k_send_key(struct ath10k_vif *arvif,
 		 * Otherwise pairwise key must be set */
 		if (memcmp(macaddr, arvif->vif->addr, ETH_ALEN))
 			arg.key_flags = WMI_KEY_PAIRWISE;
+
+		if (def_idx)
+			arg.key_flags |= WMI_KEY_TX_USAGE;
 		break;
 	default:
 		ath10k_warn(ar, "cipher %d is not supported\n", key->cipher);
@@ -89,7 +92,7 @@ static int ath10k_send_key(struct ath10k_vif *arvif,
 static int ath10k_install_key(struct ath10k_vif *arvif,
 			      struct ieee80211_key_conf *key,
 			      enum set_key_cmd cmd,
-			      const u8 *macaddr)
+			      const u8 *macaddr, bool def_idx)
 {
 	struct ath10k *ar = arvif->ar;
 	int ret;
@@ -98,7 +101,7 @@ static int ath10k_install_key(struct ath10k_vif *arvif,
 
 	reinit_completion(&ar->install_key_done);
 
-	ret = ath10k_send_key(arvif, key, cmd, macaddr);
+	ret = ath10k_send_key(arvif, key, cmd, macaddr, def_idx);
 	if (ret)
 		return ret;
 
@@ -116,6 +119,7 @@ static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
 	struct ath10k_peer *peer;
 	int ret;
 	int i;
+	bool def_idx;
 
 	lockdep_assert_held(&ar->conf_mutex);
 
@@ -129,9 +133,14 @@ static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif,
 	for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) {
 		if (arvif->wep_keys[i] == NULL)
 			continue;
+		/* set TX_USAGE flag for default key id */
+		if (arvif->def_wep_key_idx == i)
+			def_idx = true;
+		else
+			def_idx = false;
 
 		ret = ath10k_install_key(arvif, arvif->wep_keys[i], SET_KEY,
-					 addr);
+					 addr, def_idx);
 		if (ret)
 			return ret;
 
@@ -165,8 +174,9 @@ static int ath10k_clear_peer_keys(struct ath10k_vif *arvif,
 		if (peer->keys[i] == NULL)
 			continue;
 
+		/* key flags are not required to delete the key */
 		ret = ath10k_install_key(arvif, peer->keys[i],
-					 DISABLE_KEY, addr);
+					 DISABLE_KEY, addr, false);
 		if (ret && first_errno == 0)
 			first_errno = ret;
 
@@ -240,8 +250,8 @@ static int ath10k_clear_vdev_key(struct ath10k_vif *arvif,
 
 		if (i == ARRAY_SIZE(peer->keys))
 			break;
-
-		ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr);
+		/* key flags are not required to delete the key */
+		ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr, false);
 		if (ret && first_errno == 0)
 			first_errno = ret;
 
@@ -1855,7 +1865,8 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw,
 		ath10k_warn(ar, "faield to down vdev %i: %d\n",
 			    arvif->vdev_id, ret);
 
-	arvif->def_wep_key_idx = 0;
+	arvif->def_wep_key_idx = -1;
+
 	arvif->is_up = false;
 }
 
@@ -1914,11 +1925,14 @@ static int ath10k_station_assoc(struct ath10k *ar,
 			}
 		}
 
-		ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
-		if (ret) {
-			ath10k_warn(ar, "failed to install peer wep keys for vdev %i: %d\n",
-				    arvif->vdev_id, ret);
-			return ret;
+		/* Plumb cached keys only for static WEP */
+		if (arvif->def_wep_key_idx != -1) {
+			ret = ath10k_install_peer_wep_keys(arvif, sta->addr);
+			if (ret) {
+				ath10k_warn(ar, "failed to install peer wep keys for vdev %i: %d\n",
+					    arvif->vdev_id, ret);
+				return ret;
+			}
 		}
 	}
 
@@ -2190,69 +2204,6 @@ static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb)
 	}
 }
 
-static void ath10k_tx_wep_key_work(struct work_struct *work)
-{
-	struct ath10k_vif *arvif = container_of(work, struct ath10k_vif,
-						wep_key_work);
-	struct ath10k *ar = arvif->ar;
-	int ret, keyidx = arvif->def_wep_key_newidx;
-
-	mutex_lock(&arvif->ar->conf_mutex);
-
-	if (arvif->ar->state != ATH10K_STATE_ON)
-		goto unlock;
-
-	if (arvif->def_wep_key_idx == keyidx)
-		goto unlock;
-
-	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n",
-		   arvif->vdev_id, keyidx);
-
-	ret = ath10k_wmi_vdev_set_param(arvif->ar,
-					arvif->vdev_id,
-					arvif->ar->wmi.vdev_param->def_keyid,
-					keyidx);
-	if (ret) {
-		ath10k_warn(ar, "failed to update wep key index for vdev %d: %d\n",
-			    arvif->vdev_id,
-			    ret);
-		goto unlock;
-	}
-
-	arvif->def_wep_key_idx = keyidx;
-
-unlock:
-	mutex_unlock(&arvif->ar->conf_mutex);
-}
-
-static void ath10k_tx_h_update_wep_key(struct ieee80211_vif *vif,
-				       struct ieee80211_key_conf *key,
-				       struct sk_buff *skb)
-{
-	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
-	struct ath10k *ar = arvif->ar;
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-
-	if (!ieee80211_has_protected(hdr->frame_control))
-		return;
-
-	if (!key)
-		return;
-
-	if (key->cipher != WLAN_CIPHER_SUITE_WEP40 &&
-	    key->cipher != WLAN_CIPHER_SUITE_WEP104)
-		return;
-
-	if (key->keyidx == arvif->def_wep_key_idx)
-		return;
-
-	/* FIXME: Most likely a few frames will be TXed with an old key. Simply
-	 * queueing frames until key index is updated is not an option because
-	 * sk_buff may need more processing to be done, e.g. offchannel */
-	arvif->def_wep_key_newidx = key->keyidx;
-	ieee80211_queue_work(ar->hw, &arvif->wep_key_work);
-}
-
 static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar,
 				       struct ieee80211_vif *vif,
 				       struct sk_buff *skb)
@@ -2613,7 +2564,6 @@ static void ath10k_tx(struct ieee80211_hw *hw,
 	struct ath10k *ar = hw->priv;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_vif *vif = info->control.vif;
-	struct ieee80211_key_conf *key = info->control.hw_key;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 
 	/* We should disable CCK RATE due to P2P */
@@ -2627,7 +2577,6 @@ static void ath10k_tx(struct ieee80211_hw *hw,
 	/* it makes no sense to process injected frames like that */
 	if (vif && vif->type != NL80211_IFTYPE_MONITOR) {
 		ath10k_tx_h_nwifi(hw, skb);
-		ath10k_tx_h_update_wep_key(vif, key, skb);
 		ath10k_tx_h_add_p2p_noa_ie(ar, vif, skb);
 		ath10k_tx_h_seq_no(vif, skb);
 	}
@@ -3132,7 +3081,6 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 	arvif->ar = ar;
 	arvif->vif = vif;
 
-	INIT_WORK(&arvif->wep_key_work, ath10k_tx_wep_key_work);
 	INIT_LIST_HEAD(&arvif->list);
 
 	if (ar->free_vdev_map == 0) {
@@ -3231,14 +3179,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		goto err_vdev_delete;
 	}
 
-	vdev_param = ar->wmi.vdev_param->def_keyid;
-	ret = ath10k_wmi_vdev_set_param(ar, 0, vdev_param,
-					arvif->def_wep_key_idx);
-	if (ret) {
-		ath10k_warn(ar, "failed to set vdev %i default key id: %d\n",
-			    arvif->vdev_id, ret);
-		goto err_vdev_delete;
-	}
+	arvif->def_wep_key_idx = -1;
 
 	vdev_param = ar->wmi.vdev_param->tx_encap_type;
 	ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
@@ -3358,8 +3299,6 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
 	int ret;
 
-	cancel_work_sync(&arvif->wep_key_work);
-
 	mutex_lock(&ar->conf_mutex);
 
 	spin_lock_bh(&ar->data_lock);
@@ -3731,6 +3670,7 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	const u8 *peer_addr;
 	bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
 		      key->cipher == WLAN_CIPHER_SUITE_WEP104;
+	bool def_idx = false;
 	int ret = 0;
 
 	if (key->keyidx > WMI_MAX_KEY_INDEX)
@@ -3776,7 +3716,14 @@ static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 			ath10k_clear_vdev_key(arvif, key);
 	}
 
-	ret = ath10k_install_key(arvif, key, cmd, peer_addr);
+	/* set TX_USAGE flag for all the keys incase of dot1x-WEP. For
+	 * static WEP, do not set this flag for the keys whose key id
+	 * is  greater than default key id.
+	 */
+	if (arvif->def_wep_key_idx == -1)
+		def_idx = true;
+
+	ret = ath10k_install_key(arvif, key, cmd, peer_addr, def_idx);
 	if (ret) {
 		ath10k_warn(ar, "failed to install key for vdev %i peer %pM: %d\n",
 			    arvif->vdev_id, peer_addr, ret);
@@ -3801,6 +3748,39 @@ exit:
 	return ret;
 }
 
+static void ath10k_set_default_unicast_key(struct ieee80211_hw *hw,
+					   struct ieee80211_vif *vif,
+					   int keyidx)
+{
+	struct ath10k *ar = hw->priv;
+	struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
+	int ret;
+
+	mutex_lock(&arvif->ar->conf_mutex);
+
+	if (arvif->ar->state != ATH10K_STATE_ON)
+		goto unlock;
+
+	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n",
+		   arvif->vdev_id, keyidx);
+
+	ret = ath10k_wmi_vdev_set_param(arvif->ar,
+					arvif->vdev_id,
+					arvif->ar->wmi.vdev_param->def_keyid,
+					keyidx);
+
+	if (ret) {
+		ath10k_warn(ar, "failed to update wep key index for vdev %d: %d\n",
+			    arvif->vdev_id,
+			    ret);
+		goto unlock;
+	}
+
+	arvif->def_wep_key_idx = keyidx;
+unlock:
+	mutex_unlock(&arvif->ar->conf_mutex);
+}
+
 static void ath10k_sta_rc_update_wk(struct work_struct *wk)
 {
 	struct ath10k *ar;
@@ -4966,6 +4946,7 @@ static const struct ieee80211_ops ath10k_ops = {
 	.hw_scan			= ath10k_hw_scan,
 	.cancel_hw_scan			= ath10k_cancel_hw_scan,
 	.set_key			= ath10k_set_key,
+	.set_default_unicast_key        = ath10k_set_default_unicast_key,
 	.sta_state			= ath10k_sta_state,
 	.conf_tx			= ath10k_conf_tx,
 	.remain_on_channel		= ath10k_remain_on_channel,
-- 
cgit v1.1


From 9ad501827bd153dc2865dd60a456e3e43283b507 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 29 Jan 2015 14:29:47 +0200
Subject: ath10k: change dma beacon cmd prototype

The command logic shouldn't really care about
arvif structure.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 14 ++++++++++----
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 20 +++++++++++---------
 drivers/net/wireless/ath/ath10k/wmi.c     | 27 +++++++++++++++++----------
 3 files changed, 38 insertions(+), 23 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 058f88b..de43616 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -104,7 +104,10 @@ struct wmi_ops {
 					 u32 value);
 	struct sk_buff *(*gen_scan_chan_list)(struct ath10k *ar,
 					      const struct wmi_scan_chan_list_arg *arg);
-	struct sk_buff *(*gen_beacon_dma)(struct ath10k_vif *arvif);
+	struct sk_buff *(*gen_beacon_dma)(struct ath10k *ar, u32 vdev_id,
+					  const void *bcn, size_t bcn_len,
+					  u32 bcn_paddr, bool dtim_zero,
+					  bool deliver_cab);
 	struct sk_buff *(*gen_pdev_set_wmm)(struct ath10k *ar,
 					    const struct wmi_wmm_params_all_arg *arg);
 	struct sk_buff *(*gen_request_stats)(struct ath10k *ar,
@@ -768,16 +771,19 @@ ath10k_wmi_peer_assoc(struct ath10k *ar,
 }
 
 static inline int
-ath10k_wmi_beacon_send_ref_nowait(struct ath10k_vif *arvif)
+ath10k_wmi_beacon_send_ref_nowait(struct ath10k *ar, u32 vdev_id,
+				  const void *bcn, size_t bcn_len,
+				  u32 bcn_paddr, bool dtim_zero,
+				  bool deliver_cab)
 {
-	struct ath10k *ar = arvif->ar;
 	struct sk_buff *skb;
 	int ret;
 
 	if (!ar->wmi.ops->gen_beacon_dma)
 		return -EOPNOTSUPP;
 
-	skb = ar->wmi.ops->gen_beacon_dma(arvif);
+	skb = ar->wmi.ops->gen_beacon_dma(ar, vdev_id, bcn, bcn_len, bcn_paddr,
+					  dtim_zero, deliver_cab);
 	if (IS_ERR(skb))
 		return PTR_ERR(skb);
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index be32db9..ba78c18 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2001,13 +2001,15 @@ ath10k_wmi_tlv_op_gen_scan_chan_list(struct ath10k *ar,
 }
 
 static struct sk_buff *
-ath10k_wmi_tlv_op_gen_beacon_dma(struct ath10k_vif *arvif)
+ath10k_wmi_tlv_op_gen_beacon_dma(struct ath10k *ar, u32 vdev_id,
+				 const void *bcn, size_t bcn_len,
+				 u32 bcn_paddr, bool dtim_zero,
+				 bool deliver_cab)
+
 {
-	struct ath10k *ar = arvif->ar;
 	struct wmi_bcn_tx_ref_cmd *cmd;
 	struct wmi_tlv *tlv;
 	struct sk_buff *skb;
-	struct sk_buff *beacon = arvif->beacon;
 	struct ieee80211_hdr *hdr;
 	u16 fc;
 
@@ -2015,24 +2017,24 @@ ath10k_wmi_tlv_op_gen_beacon_dma(struct ath10k_vif *arvif)
 	if (!skb)
 		return ERR_PTR(-ENOMEM);
 
-	hdr = (struct ieee80211_hdr *)beacon->data;
+	hdr = (struct ieee80211_hdr *)bcn;
 	fc = le16_to_cpu(hdr->frame_control);
 
 	tlv = (void *)skb->data;
 	tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_BCN_SEND_FROM_HOST_CMD);
 	tlv->len = __cpu_to_le16(sizeof(*cmd));
 	cmd = (void *)tlv->value;
-	cmd->vdev_id = __cpu_to_le32(arvif->vdev_id);
-	cmd->data_len = __cpu_to_le32(beacon->len);
-	cmd->data_ptr = __cpu_to_le32(ATH10K_SKB_CB(beacon)->paddr);
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	cmd->data_len = __cpu_to_le32(bcn_len);
+	cmd->data_ptr = __cpu_to_le32(bcn_paddr);
 	cmd->msdu_id = 0;
 	cmd->frame_control = __cpu_to_le32(fc);
 	cmd->flags = 0;
 
-	if (ATH10K_SKB_CB(beacon)->bcn.dtim_zero)
+	if (dtim_zero)
 		cmd->flags |= __cpu_to_le32(WMI_BCN_TX_REF_FLAG_DTIM_ZERO);
 
-	if (ATH10K_SKB_CB(beacon)->bcn.deliver_cab)
+	if (deliver_cab)
 		cmd->flags |= __cpu_to_le32(WMI_BCN_TX_REF_FLAG_DELIVER_CAB);
 
 	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv beacon dma\n");
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 81561e4..01c0230 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -956,6 +956,8 @@ err_pull:
 
 static void ath10k_wmi_tx_beacon_nowait(struct ath10k_vif *arvif)
 {
+	struct sk_buff *bcn;
+	struct ath10k_skb_cb *cb;
 	int ret;
 
 	lockdep_assert_held(&arvif->ar->data_lock);
@@ -966,7 +968,12 @@ static void ath10k_wmi_tx_beacon_nowait(struct ath10k_vif *arvif)
 	if (arvif->beacon_sent)
 		return;
 
-	ret = ath10k_wmi_beacon_send_ref_nowait(arvif);
+	bcn = arvif->beacon;
+	cb = ATH10K_SKB_CB(bcn);
+	ret = ath10k_wmi_beacon_send_ref_nowait(arvif->ar, arvif->vdev_id,
+						bcn->data, bcn->len, cb->paddr,
+						cb->bcn.dtim_zero,
+						cb->bcn.deliver_cab);
 	if (ret)
 		return;
 
@@ -4856,12 +4863,12 @@ ath10k_wmi_10_2_op_gen_pdev_get_temperature(struct ath10k *ar)
 
 /* This function assumes the beacon is already DMA mapped */
 static struct sk_buff *
-ath10k_wmi_op_gen_beacon_dma(struct ath10k_vif *arvif)
+ath10k_wmi_op_gen_beacon_dma(struct ath10k *ar, u32 vdev_id, const void *bcn,
+			     size_t bcn_len, u32 bcn_paddr, bool dtim_zero,
+			     bool deliver_cab)
 {
-	struct ath10k *ar = arvif->ar;
 	struct wmi_bcn_tx_ref_cmd *cmd;
 	struct sk_buff *skb;
-	struct sk_buff *beacon = arvif->beacon;
 	struct ieee80211_hdr *hdr;
 	u16 fc;
 
@@ -4869,22 +4876,22 @@ ath10k_wmi_op_gen_beacon_dma(struct ath10k_vif *arvif)
 	if (!skb)
 		return ERR_PTR(-ENOMEM);
 
-	hdr = (struct ieee80211_hdr *)beacon->data;
+	hdr = (struct ieee80211_hdr *)bcn;
 	fc = le16_to_cpu(hdr->frame_control);
 
 	cmd = (struct wmi_bcn_tx_ref_cmd *)skb->data;
-	cmd->vdev_id = __cpu_to_le32(arvif->vdev_id);
-	cmd->data_len = __cpu_to_le32(beacon->len);
-	cmd->data_ptr = __cpu_to_le32(ATH10K_SKB_CB(beacon)->paddr);
+	cmd->vdev_id = __cpu_to_le32(vdev_id);
+	cmd->data_len = __cpu_to_le32(bcn_len);
+	cmd->data_ptr = __cpu_to_le32(bcn_paddr);
 	cmd->msdu_id = 0;
 	cmd->frame_control = __cpu_to_le32(fc);
 	cmd->flags = 0;
 	cmd->antenna_mask = __cpu_to_le32(WMI_BCN_TX_REF_DEF_ANTENNA);
 
-	if (ATH10K_SKB_CB(beacon)->bcn.dtim_zero)
+	if (dtim_zero)
 		cmd->flags |= __cpu_to_le32(WMI_BCN_TX_REF_FLAG_DTIM_ZERO);
 
-	if (ATH10K_SKB_CB(beacon)->bcn.deliver_cab)
+	if (deliver_cab)
 		cmd->flags |= __cpu_to_le32(WMI_BCN_TX_REF_FLAG_DELIVER_CAB);
 
 	return skb;
-- 
cgit v1.1


From af21319fcda4c43aa89186e0d6001432c5d6000e Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 29 Jan 2015 14:29:52 +0200
Subject: ath10k: fix beacon deadlock

This should fix a very rare occurrence of the following deadlock:

  [<ffffffffa018265e>] ath10k_wmi_tx_beacons_nowait+0x1e/0x50 [ath10k_core]
  [<ffffffffa01829b6>] ath10k_wmi_op_ep_tx_credits+0x16/0x40 [ath10k_core]
  [<ffffffffa017d685>] ath10k_htc_send+0x285/0x3d0 [ath10k_core]
  [<ffffffffa0184b81>] ath10k_wmi_cmd_send_nowait+0x81/0x110 [ath10k_core]
  [<ffffffffa0184c61>] ath10k_wmi_tx_beacon_nowait.part.33+0x51/0x90 [ath10k_core]
  [<ffffffffa0184cd0>] ath10k_wmi_tx_beacons_iter+0x30/0x40 [ath10k_core]
  [<ffffffff81882246>] __iterate_active_interfaces+0xa6/0x100
  [<ffffffffa0184ca0>] ? ath10k_wmi_tx_beacon_nowait.part.33+0x90/0x90 [ath10k_core]
  [<ffffffff818822ae>] ieee80211_iterate_active_interfaces_atomic+0xe/0x10
  [<ffffffffa0182676>] ath10k_wmi_tx_beacons_nowait+0x36/0x50 [ath10k_core]
  [<ffffffffa01829b6>] ath10k_wmi_op_ep_tx_credits+0x16/0x40 [ath10k_core]
  [<ffffffffa017d140>] ath10k_htc_rx+0x280/0x410 [ath10k_core]
  [<ffffffffa01bcbf0>] ? ath10k_ce_completed_recv_next+0x60/0x80 [ath10k_pci]
  [<ffffffffa01bc6ab>] ath10k_pci_ce_recv_data+0x11b/0x1d0 [ath10k_pci]
  [<ffffffffa01bcf44>] ath10k_ce_per_engine_service+0x64/0xc0 [ath10k_pci]
  [<ffffffffa01bcfc2>] ath10k_ce_per_engine_service_any+0x22/0x50 [ath10k_pci]
  [<ffffffffa01bc4d0>] ath10k_pci_tasklet+0x30/0x90 [ath10k_pci]
  [<ffffffff81055a55>] tasklet_action+0xc5/0x100

To prevent this make sure to release ar->data_lock
while calling to ath10k_wmi_beacon_send_ref_nowait().

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h |  8 +++-
 drivers/net/wireless/ath/ath10k/mac.c  |  6 ++-
 drivers/net/wireless/ath/ath10k/wmi.c  | 68 +++++++++++++++++++++++-----------
 3 files changed, 58 insertions(+), 24 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index a47b41d..c8ba6bd 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -262,6 +262,12 @@ struct ath10k_sta {
 
 #define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
 
+enum ath10k_beacon_state {
+	ATH10K_BEACON_SCHEDULED = 0,
+	ATH10K_BEACON_SENDING,
+	ATH10K_BEACON_SENT,
+};
+
 struct ath10k_vif {
 	struct list_head list;
 
@@ -272,7 +278,7 @@ struct ath10k_vif {
 	u32 dtim_period;
 	struct sk_buff *beacon;
 	/* protected by data_lock */
-	bool beacon_sent;
+	enum ath10k_beacon_state beacon_state;
 	void *beacon_buf;
 	dma_addr_t beacon_paddr;
 
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index d3fe1a3..d0d882d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -531,10 +531,14 @@ void ath10k_mac_vif_beacon_free(struct ath10k_vif *arvif)
 		dma_unmap_single(ar->dev, ATH10K_SKB_CB(arvif->beacon)->paddr,
 				 arvif->beacon->len, DMA_TO_DEVICE);
 
+	if (WARN_ON(arvif->beacon_state != ATH10K_BEACON_SCHEDULED &&
+		    arvif->beacon_state != ATH10K_BEACON_SENT))
+		return;
+
 	dev_kfree_skb_any(arvif->beacon);
 
 	arvif->beacon = NULL;
-	arvif->beacon_sent = false;
+	arvif->beacon_state = ATH10K_BEACON_SCHEDULED;
 }
 
 static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif)
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 01c0230..d6c5b42 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -956,30 +956,45 @@ err_pull:
 
 static void ath10k_wmi_tx_beacon_nowait(struct ath10k_vif *arvif)
 {
-	struct sk_buff *bcn;
+	struct ath10k *ar = arvif->ar;
 	struct ath10k_skb_cb *cb;
+	struct sk_buff *bcn;
 	int ret;
 
-	lockdep_assert_held(&arvif->ar->data_lock);
+	spin_lock_bh(&ar->data_lock);
 
-	if (arvif->beacon == NULL)
-		return;
+	bcn = arvif->beacon;
 
-	if (arvif->beacon_sent)
-		return;
+	if (!bcn)
+		goto unlock;
 
-	bcn = arvif->beacon;
 	cb = ATH10K_SKB_CB(bcn);
-	ret = ath10k_wmi_beacon_send_ref_nowait(arvif->ar, arvif->vdev_id,
-						bcn->data, bcn->len, cb->paddr,
-						cb->bcn.dtim_zero,
-						cb->bcn.deliver_cab);
-	if (ret)
-		return;
 
-	/* We need to retain the arvif->beacon reference for DMA unmapping and
-	 * freeing the skbuff later. */
-	arvif->beacon_sent = true;
+	switch (arvif->beacon_state) {
+	case ATH10K_BEACON_SENDING:
+	case ATH10K_BEACON_SENT:
+		break;
+	case ATH10K_BEACON_SCHEDULED:
+		arvif->beacon_state = ATH10K_BEACON_SENDING;
+		spin_unlock_bh(&ar->data_lock);
+
+		ret = ath10k_wmi_beacon_send_ref_nowait(arvif->ar,
+							arvif->vdev_id,
+							bcn->data, bcn->len,
+							cb->paddr,
+							cb->bcn.dtim_zero,
+							cb->bcn.deliver_cab);
+
+		spin_lock_bh(&ar->data_lock);
+
+		if (ret == 0)
+			arvif->beacon_state = ATH10K_BEACON_SENT;
+		else
+			arvif->beacon_state = ATH10K_BEACON_SCHEDULED;
+	}
+
+unlock:
+	spin_unlock_bh(&ar->data_lock);
 }
 
 static void ath10k_wmi_tx_beacons_iter(void *data, u8 *mac,
@@ -992,12 +1007,10 @@ static void ath10k_wmi_tx_beacons_iter(void *data, u8 *mac,
 
 static void ath10k_wmi_tx_beacons_nowait(struct ath10k *ar)
 {
-	spin_lock_bh(&ar->data_lock);
 	ieee80211_iterate_active_interfaces_atomic(ar->hw,
 						   IEEE80211_IFACE_ITER_NORMAL,
 						   ath10k_wmi_tx_beacons_iter,
 						   NULL);
-	spin_unlock_bh(&ar->data_lock);
 }
 
 static void ath10k_wmi_op_ep_tx_credits(struct ath10k *ar)
@@ -2459,9 +2472,19 @@ void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb)
 		spin_lock_bh(&ar->data_lock);
 
 		if (arvif->beacon) {
-			if (!arvif->beacon_sent)
-				ath10k_warn(ar, "SWBA overrun on vdev %d\n",
+			switch (arvif->beacon_state) {
+			case ATH10K_BEACON_SENT:
+				break;
+			case ATH10K_BEACON_SCHEDULED:
+				ath10k_warn(ar, "SWBA overrun on vdev %d, skipped old beacon\n",
+					    arvif->vdev_id);
+				break;
+			case ATH10K_BEACON_SENDING:
+				ath10k_warn(ar, "SWBA overrun on vdev %d, skipped new beacon\n",
 					    arvif->vdev_id);
+				dev_kfree_skb(bcn);
+				goto skip;
+			}
 
 			ath10k_mac_vif_beacon_free(arvif);
 		}
@@ -2489,15 +2512,16 @@ void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb)
 		}
 
 		arvif->beacon = bcn;
-		arvif->beacon_sent = false;
+		arvif->beacon_state = ATH10K_BEACON_SCHEDULED;
 
 		trace_ath10k_tx_hdr(ar, bcn->data, bcn->len);
 		trace_ath10k_tx_payload(ar, bcn->data, bcn->len);
 
-		ath10k_wmi_tx_beacon_nowait(arvif);
 skip:
 		spin_unlock_bh(&ar->data_lock);
 	}
+
+	ath10k_wmi_tx_beacons_nowait(ar);
 }
 
 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb)
-- 
cgit v1.1


From 75930d1a80e81052376ffc5298aadfe8a075d9d2 Mon Sep 17 00:00:00 2001
From: Helmut Schaa <helmut.schaa@googlemail.com>
Date: Wed, 28 Jan 2015 11:31:32 +0100
Subject: ath10k: Use TX cksum offload only for CHECKSUM_PARTIAL

Otherwise ath10k will just checksum everything even if it did not
go through the TCP/IP stack (for example bridged frames). In the worst
case this could mean recreating the checksum for incorrect data.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/htt_tx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index c1961e7..cbd2bc9 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -515,8 +515,10 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
 
 	flags1 |= SM((u16)vdev_id, HTT_DATA_TX_DESC_FLAGS1_VDEV_ID);
 	flags1 |= SM((u16)tid, HTT_DATA_TX_DESC_FLAGS1_EXT_TID);
-	flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD;
-	flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD;
+	if (msdu->ip_summed == CHECKSUM_PARTIAL) {
+		flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD;
+		flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD;
+	}
 
 	/* Prevent firmware from sending up tx inspection requests. There's
 	 * nothing ath10k can do with frames requested for inspection so force
-- 
cgit v1.1


From 467210a67b8e4e63dc7fb0bc9aca21e412f32da5 Mon Sep 17 00:00:00 2001
From: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
Date: Thu, 29 Jan 2015 14:36:52 +0530
Subject: ath10k: add log level configuration for fw_dbglog

Introduce an optional log level configuration for the existing debugfs fw_dbglog file. It
allows users to configure the desired log level for firmware dbglog messages.

To configure log level as WARN:

echo 0xffffffff  2 > /sys/kernel/debug/ieee80211/phy0/ath10k/fw_dbglog

The values are:

VERBOSE		0
INFO		1
WARN		2
ERR		3

Signed-off-by: SenthilKumar Jegadeesan <sjegadee@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.h    |  1 +
 drivers/net/wireless/ath/ath10k/debug.c   | 32 ++++++++++++++++++++++---------
 drivers/net/wireless/ath/ath10k/wmi-ops.h |  7 ++++---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |  4 ++--
 drivers/net/wireless/ath/ath10k/wmi.c     |  5 +++--
 5 files changed, 33 insertions(+), 16 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index c8ba6bd..d60e46f 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -350,6 +350,7 @@ struct ath10k_debug {
 
 	/* protected by conf_mutex */
 	u32 fw_dbglog_mask;
+	u32 fw_dbglog_level;
 	u32 pktlog_filter;
 	u32 reg_addr;
 	u32 nf_cal_period;
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 42b2e49..d2281e5 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -1318,10 +1318,10 @@ static ssize_t ath10k_read_fw_dbglog(struct file *file,
 {
 	struct ath10k *ar = file->private_data;
 	unsigned int len;
-	char buf[32];
+	char buf[64];
 
-	len = scnprintf(buf, sizeof(buf), "0x%08x\n",
-			ar->debug.fw_dbglog_mask);
+	len = scnprintf(buf, sizeof(buf), "0x%08x %u\n",
+			ar->debug.fw_dbglog_mask, ar->debug.fw_dbglog_level);
 
 	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
 }
@@ -1331,19 +1331,32 @@ static ssize_t ath10k_write_fw_dbglog(struct file *file,
 				      size_t count, loff_t *ppos)
 {
 	struct ath10k *ar = file->private_data;
-	unsigned long mask;
 	int ret;
+	char buf[64];
+	unsigned int log_level, mask;
 
-	ret = kstrtoul_from_user(user_buf, count, 0, &mask);
-	if (ret)
-		return ret;
+	simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+
+	/* make sure that buf is null terminated */
+	buf[sizeof(buf) - 1] = 0;
+
+	ret = sscanf(buf, "%x %u", &mask, &log_level);
+
+	if (!ret)
+		return -EINVAL;
+
+	if (ret == 1)
+		/* default if user did not specify */
+		log_level = ATH10K_DBGLOG_LEVEL_WARN;
 
 	mutex_lock(&ar->conf_mutex);
 
 	ar->debug.fw_dbglog_mask = mask;
+	ar->debug.fw_dbglog_level = log_level;
 
 	if (ar->state == ATH10K_STATE_ON) {
-		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask);
+		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask,
+					    ar->debug.fw_dbglog_level);
 		if (ret) {
 			ath10k_warn(ar, "dbglog cfg failed from debugfs: %d\n",
 				    ret);
@@ -1685,7 +1698,8 @@ int ath10k_debug_start(struct ath10k *ar)
 			    ret);
 
 	if (ar->debug.fw_dbglog_mask) {
-		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask);
+		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask,
+					    ATH10K_DBGLOG_LEVEL_WARN);
 		if (ret)
 			/* not serious */
 			ath10k_warn(ar, "failed to enable dbglog during start: %d",
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index de43616..04dc4b9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -116,7 +116,8 @@ struct wmi_ops {
 					     enum wmi_force_fw_hang_type type,
 					     u32 delay_ms);
 	struct sk_buff *(*gen_mgmt_tx)(struct ath10k *ar, struct sk_buff *skb);
-	struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u32 module_enable);
+	struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u32 module_enable,
+					  u32 log_level);
 	struct sk_buff *(*gen_pktlog_enable)(struct ath10k *ar, u32 filter);
 	struct sk_buff *(*gen_pktlog_disable)(struct ath10k *ar);
 	struct sk_buff *(*gen_pdev_set_quiet_mode)(struct ath10k *ar,
@@ -846,14 +847,14 @@ ath10k_wmi_force_fw_hang(struct ath10k *ar,
 }
 
 static inline int
-ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable)
+ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable, u32 log_level)
 {
 	struct sk_buff *skb;
 
 	if (!ar->wmi.ops->gen_dbglog_cfg)
 		return -EOPNOTSUPP;
 
-	skb = ar->wmi.ops->gen_dbglog_cfg(ar, module_enable);
+	skb = ar->wmi.ops->gen_dbglog_cfg(ar, module_enable, log_level);
 	if (IS_ERR(skb))
 		return PTR_ERR(skb);
 
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index ba78c18..71614ba 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2126,8 +2126,8 @@ ath10k_wmi_tlv_op_gen_force_fw_hang(struct ath10k *ar,
 }
 
 static struct sk_buff *
-ath10k_wmi_tlv_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable)
-{
+ath10k_wmi_tlv_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable,
+				 u32 log_level) {
 	struct wmi_tlv_dbglog_cmd *cmd;
 	struct wmi_tlv *tlv;
 	struct sk_buff *skb;
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index d6c5b42..fd213d9 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4991,7 +4991,8 @@ ath10k_wmi_op_gen_force_fw_hang(struct ath10k *ar,
 }
 
 static struct sk_buff *
-ath10k_wmi_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable)
+ath10k_wmi_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable,
+			     u32 log_level)
 {
 	struct wmi_dbglog_cfg_cmd *cmd;
 	struct sk_buff *skb;
@@ -5004,7 +5005,7 @@ ath10k_wmi_op_gen_dbglog_cfg(struct ath10k *ar, u32 module_enable)
 	cmd = (struct wmi_dbglog_cfg_cmd *)skb->data;
 
 	if (module_enable) {
-		cfg = SM(ATH10K_DBGLOG_LEVEL_VERBOSE,
+		cfg = SM(log_level,
 			 ATH10K_DBGLOG_CFG_LOG_LVL);
 	} else {
 		/* set back defaults, all modules with WARN level */
-- 
cgit v1.1


From 608b8f736bf520649ced45b0fdabf847be8e5e55 Mon Sep 17 00:00:00 2001
From: Michal Kazior <michal.kazior@tieto.com>
Date: Thu, 29 Jan 2015 13:24:33 +0100
Subject: ath10k: enable qca6174 hw3.2

The 3.2 revision has a different target BMI
version so it wasn't recognized by ath10k (despite
the chip_id rev being on the supported list
already).

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 15 +++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  1 +
 2 files changed, 16 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5e9e1a6..310e12b 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -85,6 +85,21 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
 		},
 	},
+	{
+		.id = QCA6174_HW_3_2_VERSION,
+		.name = "qca6174 hw3.2",
+		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
+		.uart_pin = 6,
+		.fw = {
+			/* uses same binaries as hw3.0 */
+			.dir = QCA6174_HW_3_0_FW_DIR,
+			.fw = QCA6174_HW_3_0_FW_FILE,
+			.otp = QCA6174_HW_3_0_OTP_FILE,
+			.board = QCA6174_HW_3_0_BOARD_DATA_FILE,
+			.board_size = QCA6174_BOARD_DATA_SZ,
+			.board_ext_size = QCA6174_BOARD_EXT_DATA_SZ,
+		},
+	},
 };
 
 static void ath10k_send_suspend_complete(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 5771278..460771f 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -40,6 +40,7 @@
 #define QCA6174_HW_1_3_VERSION		0x05000003
 #define QCA6174_HW_2_1_VERSION		0x05010000
 #define QCA6174_HW_3_0_VERSION		0x05020000
+#define QCA6174_HW_3_2_VERSION		0x05030000
 
 enum qca6174_pci_rev {
 	QCA6174_PCI_REV_1_1 = 0x11,
-- 
cgit v1.1


From d0311314d00298f83aa5450a1d4a92889e7cc2ea Mon Sep 17 00:00:00 2001
From: Troy Tan <troy_tan@realsil.com.cn>
Date: Tue, 3 Feb 2015 11:15:17 -0600
Subject: rtlwifi: rtl8192ee: Fix handling of new style descriptors

The hardware and firmware for the RTL8192EE utilize a FIFO list of
descriptors. There were some problems with the initial implementation.
The worst of these failed to detect that the FIFO was becoming full,
which led to the device needing to be power cycled. As this condition
is not relevant to most of the devices supported by rtlwifi, a callback
routine was added to detect this situation. This patch implements the
necessary changes in the pci handler, and the linkage into the appropriate
rtl8192ee routine.

Signed-off-by: Troy Tan <troy_tan@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V3.18]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/rtlwifi/pci.c           | 31 +++++++++++++++++++++-------
 drivers/net/wireless/rtlwifi/rtl8192ee/sw.c  |  3 +--
 drivers/net/wireless/rtlwifi/rtl8192ee/trx.c | 20 ++++++++++++++++++
 drivers/net/wireless/rtlwifi/rtl8192ee/trx.h |  1 +
 drivers/net/wireless/rtlwifi/wifi.h          |  1 +
 5 files changed, 46 insertions(+), 10 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 846a2e6..88331d7 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -578,6 +578,13 @@ static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio)
 		else
 			entry = (u8 *)(&ring->desc[ring->idx]);
 
+		if (rtlpriv->cfg->ops->get_available_desc &&
+		    rtlpriv->cfg->ops->get_available_desc(hw, prio) <= 1) {
+			RT_TRACE(rtlpriv, (COMP_INTR | COMP_SEND), DBG_DMESG,
+				 "no available desc!\n");
+			return;
+		}
+
 		if (!rtlpriv->cfg->ops->is_tx_desc_closed(hw, prio, ring->idx))
 			return;
 		ring->idx = (ring->idx + 1) % ring->entries;
@@ -641,10 +648,9 @@ static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio)
 
 		ieee80211_tx_status_irqsafe(hw, skb);
 
-		if ((ring->entries - skb_queue_len(&ring->queue))
-				== 2) {
+		if ((ring->entries - skb_queue_len(&ring->queue)) <= 4) {
 
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
 				 "more desc left, wake skb_queue@%d, ring->idx = %d, skb_queue_len = 0x%x\n",
 				 prio, ring->idx,
 				 skb_queue_len(&ring->queue));
@@ -786,7 +792,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
 			rx_remained_cnt =
 				rtlpriv->cfg->ops->rx_desc_buff_remained_cnt(hw,
 								      hw_queue);
-			if (rx_remained_cnt < 1)
+			if (rx_remained_cnt == 0)
 				return;
 
 		} else {	/* rx descriptor */
@@ -834,18 +840,18 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
 			else
 				skb_reserve(skb, stats.rx_drvinfo_size +
 					    stats.rx_bufshift);
-
 		} else {
 			RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
 				 "skb->end - skb->tail = %d, len is %d\n",
 				 skb->end - skb->tail, len);
-			break;
+			dev_kfree_skb_any(skb);
+			goto new_trx_end;
 		}
 		/* handle command packet here */
 		if (rtlpriv->cfg->ops->rx_command_packet &&
 		    rtlpriv->cfg->ops->rx_command_packet(hw, stats, skb)) {
 				dev_kfree_skb_any(skb);
-				goto end;
+				goto new_trx_end;
 		}
 
 		/*
@@ -895,6 +901,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
 		} else {
 			dev_kfree_skb_any(skb);
 		}
+new_trx_end:
 		if (rtlpriv->use_new_trx_flow) {
 			rtlpci->rx_ring[hw_queue].next_rx_rp += 1;
 			rtlpci->rx_ring[hw_queue].next_rx_rp %=
@@ -910,7 +917,6 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
 			rtlpriv->enter_ps = false;
 			schedule_work(&rtlpriv->works.lps_change_work);
 		}
-end:
 		if (rtlpriv->use_new_trx_flow) {
 			_rtl_pci_init_one_rxdesc(hw, (u8 *)buffer_desc,
 						 rxring_idx,
@@ -1672,6 +1678,15 @@ static int rtl_pci_tx(struct ieee80211_hw *hw,
 		}
 	}
 
+	if (rtlpriv->cfg->ops->get_available_desc &&
+	    rtlpriv->cfg->ops->get_available_desc(hw, hw_queue) == 0) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+				 "get_available_desc fail\n");
+			spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock,
+					       flags);
+			return skb->len;
+	}
+
 	if (ieee80211_is_data_qos(fc)) {
 		tid = rtl_get_tid(skb);
 		if (sta) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ee/sw.c
index 9b5a7d5..c31c6bf 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/sw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/sw.c
@@ -113,8 +113,6 @@ int rtl92ee_init_sw_vars(struct ieee80211_hw *hw)
 				  RCR_HTC_LOC_CTRL		|
 				  RCR_AMF			|
 				  RCR_ACF			|
-				  RCR_ADF			|
-				  RCR_AICV			|
 				  RCR_ACRC32			|
 				  RCR_AB			|
 				  RCR_AM			|
@@ -241,6 +239,7 @@ static struct rtl_hal_ops rtl8192ee_hal_ops = {
 	.set_desc = rtl92ee_set_desc,
 	.get_desc = rtl92ee_get_desc,
 	.is_tx_desc_closed = rtl92ee_is_tx_desc_closed,
+	.get_available_desc = rtl92ee_get_available_desc,
 	.tx_polling = rtl92ee_tx_polling,
 	.enable_hw_sec = rtl92ee_enable_hw_security_config,
 	.set_key = rtl92ee_set_key,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
index 2b60bdc..1245e2f 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
@@ -555,6 +555,26 @@ static u16 get_desc_addr_fr_q_idx(u16 queue_index)
 	return desc_address;
 }
 
+u16 rtl92ee_get_available_desc(struct ieee80211_hw *hw, u8 q_idx)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 point_diff = 0;
+	u16 current_tx_read_point = 0, current_tx_write_point = 0;
+	u32 tmp_4byte;
+
+	tmp_4byte = rtl_read_dword(rtlpriv,
+				   get_desc_addr_fr_q_idx(q_idx));
+	current_tx_read_point = (u16)((tmp_4byte >> 16) & 0x0fff);
+	current_tx_write_point = (u16)((tmp_4byte) & 0x0fff);
+
+	point_diff = calc_fifo_space(current_tx_read_point,
+				     current_tx_write_point);
+
+	rtlpci->tx_ring[q_idx].avl_desc = point_diff;
+	return point_diff;
+}
+
 void rtl92ee_pre_fill_tx_bd_desc(struct ieee80211_hw *hw,
 				 u8 *tx_bd_desc, u8 *desc, u8 queue_index,
 				 struct sk_buff *skb, dma_addr_t addr)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.h b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.h
index 5abb749..8f78ac9 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.h
@@ -831,6 +831,7 @@ void rtl92ee_rx_check_dma_ok(struct ieee80211_hw *hw, u8 *header_desc,
 			     u8 queue_index);
 u16	rtl92ee_rx_desc_buff_remained_cnt(struct ieee80211_hw *hw,
 					  u8 queue_index);
+u16 rtl92ee_get_available_desc(struct ieee80211_hw *hw, u8 queue_index);
 void rtl92ee_pre_fill_tx_bd_desc(struct ieee80211_hw *hw,
 				 u8 *tx_bd_desc, u8 *desc, u8 queue_index,
 				 struct sk_buff *skb, dma_addr_t addr);
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index b53d9dd..5157291 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -2182,6 +2182,7 @@ struct rtl_hal_ops {
 	void (*add_wowlan_pattern)(struct ieee80211_hw *hw,
 				   struct rtl_wow_pattern *rtl_pattern,
 				   u8 index);
+	u16 (*get_available_desc)(struct ieee80211_hw *hw, u8 q_idx);
 };
 
 struct rtl_intf_ops {
-- 
cgit v1.1


From 6d4beca3775222884e1ee9d48ef586c438c3dfa1 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Tue, 3 Feb 2015 11:15:18 -0600
Subject: rtlwifi: rtl8192ee: Fix problems with calculating free space in FIFO

This driver utilizes a FIFO buffer for RX descriptors. There are four places
in the code where it calculates the number of free slots. Several of those
locations do the calculation incorrectly. To fix these and to prevent future
mistakes, a common inline routine is created.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [V3.18]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/rtlwifi/pci.h           | 7 +++++++
 drivers/net/wireless/rtlwifi/rtl8192ee/trx.c | 9 +--------
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
index 5e83230..d4567d1 100644
--- a/drivers/net/wireless/rtlwifi/pci.h
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -325,4 +325,11 @@ static inline void pci_write32_async(struct rtl_priv *rtlpriv,
 	writel(val, (u8 __iomem *) rtlpriv->io.pci_mem_start + addr);
 }
 
+static inline u16 calc_fifo_space(u16 rp, u16 wp)
+{
+	if (rp <= wp)
+		return RTL_PCI_MAX_RX_COUNT - 1 + rp - wp;
+	return rp - wp - 1;
+}
+
 #endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
index 1245e2f..d39ee67 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ee/trx.c
@@ -499,14 +499,7 @@ u16 rtl92ee_rx_desc_buff_remained_cnt(struct ieee80211_hw *hw, u8 queue_index)
 	if (!start_rx)
 		return 0;
 
-	if ((last_read_point > (RX_DESC_NUM_92E / 2)) &&
-	    (read_point <= (RX_DESC_NUM_92E / 2))) {
-		remind_cnt = RX_DESC_NUM_92E - write_point;
-	} else {
-		remind_cnt = (read_point >= write_point) ?
-			     (read_point - write_point) :
-			     (RX_DESC_NUM_92E - write_point + read_point);
-	}
+	remind_cnt = calc_fifo_space(read_point, write_point);
 
 	if (remind_cnt == 0)
 		return 0;
-- 
cgit v1.1


From a28815db67a8a27afb4a17d30103e47c6e9e036f Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 2 Feb 2015 18:21:08 +0530
Subject: ath9k: Add support for more WOW patterns

Newer chips like WB222, WB335 support more than
8 user-configurable patterns. This patch adds
support for it by setting up the correct HW
registers.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 48 +++++++++++++----------------
 drivers/net/wireless/ath/ath9k/hw.h         |  1 +
 drivers/net/wireless/ath/ath9k/reg_wow.h    | 34 ++++++++++++++++++++
 3 files changed, 56 insertions(+), 27 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
index d2a4f6f..4b53d0b 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_wow.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -100,9 +100,11 @@ int ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
 	if (pattern_count >= ah->wow.max_patterns)
 		return -ENOSPC;
 
-	REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+	if (pattern_count < MAX_NUM_PATTERN_LEGACY)
+		REG_SET_BIT(ah, AR_WOW_PATTERN, BIT(pattern_count));
+	else
+		REG_SET_BIT(ah, AR_MAC_PCU_WOW4, BIT(pattern_count - 8));
 
-	/* set the registers for pattern */
 	for (i = 0; i < MAX_PATTERN_SIZE; i += 4) {
 		memcpy(&pattern_val, user_pattern, 4);
 		REG_WRITE(ah, (AR_WOW_TB_PATTERN(pattern_count) + i),
@@ -110,47 +112,39 @@ int ath9k_hw_wow_apply_pattern(struct ath_hw *ah, u8 *user_pattern,
 		user_pattern += 4;
 	}
 
-	/* set the registers for mask */
 	for (i = 0; i < MAX_PATTERN_MASK_SIZE; i += 4) {
 		memcpy(&mask_val, user_mask, 4);
 		REG_WRITE(ah, (AR_WOW_TB_MASK(pattern_count) + i), mask_val);
 		user_mask += 4;
 	}
 
-	/* set the pattern length to be matched
-	 *
-	 * AR_WOW_LENGTH1_REG1
-	 * bit 31:24 pattern 0 length
-	 * bit 23:16 pattern 1 length
-	 * bit 15:8 pattern 2 length
-	 * bit 7:0 pattern 3 length
-	 *
-	 * AR_WOW_LENGTH1_REG2
-	 * bit 31:24 pattern 4 length
-	 * bit 23:16 pattern 5 length
-	 * bit 15:8 pattern 6 length
-	 * bit 7:0 pattern 7 length
-	 *
-	 * the below logic writes out the new
-	 * pattern length for the corresponding
-	 * pattern_count, while masking out the
-	 * other fields
-	 */
-
-	ah->wow.wow_event_mask |= BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+	if (pattern_count < MAX_NUM_PATTERN_LEGACY)
+		ah->wow.wow_event_mask |=
+			BIT(pattern_count + AR_WOW_PAT_FOUND_SHIFT);
+	else
+		ah->wow.wow_event_mask2 |=
+			BIT((pattern_count - 8) + AR_WOW_PAT_FOUND_SHIFT);
 
 	if (pattern_count < 4) {
-		/* Pattern 0-3 uses AR_WOW_LENGTH1 register */
 		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
 		       AR_WOW_LEN1_SHIFT(pattern_count);
 		clr = AR_WOW_LENGTH1_MASK(pattern_count);
 		REG_RMW(ah, AR_WOW_LENGTH1, set, clr);
-	} else {
-		/* Pattern 4-7 uses AR_WOW_LENGTH2 register */
+	} else if (pattern_count < 8) {
 		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
 		       AR_WOW_LEN2_SHIFT(pattern_count);
 		clr = AR_WOW_LENGTH2_MASK(pattern_count);
 		REG_RMW(ah, AR_WOW_LENGTH2, set, clr);
+	} else if (pattern_count < 12) {
+		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+		       AR_WOW_LEN3_SHIFT(pattern_count);
+		clr = AR_WOW_LENGTH3_MASK(pattern_count);
+		REG_RMW(ah, AR_WOW_LENGTH3, set, clr);
+	} else if (pattern_count < MAX_NUM_PATTERN) {
+		set = (pattern_len & AR_WOW_LENGTH_MAX) <<
+		       AR_WOW_LEN4_SHIFT(pattern_count);
+		clr = AR_WOW_LENGTH4_MASK(pattern_count);
+		REG_RMW(ah, AR_WOW_LENGTH4, set, clr);
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index f51a28f..c8b3d8f 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -273,6 +273,7 @@ enum ath9k_hw_caps {
 
 struct ath9k_hw_wow {
 	u32 wow_event_mask;
+	u32 wow_event_mask2;
 	u8 max_patterns;
 };
 
diff --git a/drivers/net/wireless/ath/ath9k/reg_wow.h b/drivers/net/wireless/ath/ath9k/reg_wow.h
index e6de4a3..83f27f9 100644
--- a/drivers/net/wireless/ath/ath9k/reg_wow.h
+++ b/drivers/net/wireless/ath/ath9k/reg_wow.h
@@ -25,9 +25,39 @@
 #define AR_WOW_KEEP_ALIVE               0x827c
 #define AR_WOW_KEEP_ALIVE_DELAY         0x8288
 #define AR_WOW_PATTERN_MATCH            0x828c
+
+/*
+ * AR_WOW_LENGTH1
+ * bit 31:24 pattern 0 length
+ * bit 23:16 pattern 1 length
+ * bit 15:8 pattern 2 length
+ * bit 7:0 pattern 3 length
+ *
+ * AR_WOW_LENGTH2
+ * bit 31:24 pattern 4 length
+ * bit 23:16 pattern 5 length
+ * bit 15:8 pattern 6 length
+ * bit 7:0 pattern 7 length
+ *
+ * AR_WOW_LENGTH3
+ * bit 31:24 pattern 8 length
+ * bit 23:16 pattern 9 length
+ * bit 15:8 pattern 10 length
+ * bit 7:0 pattern 11 length
+ *
+ * AR_WOW_LENGTH4
+ * bit 31:24 pattern 12 length
+ * bit 23:16 pattern 13 length
+ * bit 15:8 pattern 14 length
+ * bit 7:0 pattern 15 length
+ */
 #define AR_WOW_LENGTH1                  0x8360
 #define AR_WOW_LENGTH2                  0X8364
+#define AR_WOW_LENGTH3                  0X8380
+#define AR_WOW_LENGTH4                  0X8384
+
 #define AR_WOW_PATTERN_MATCH_LT_256B    0x8368
+#define AR_MAC_PCU_WOW4                 0x8370
 
 #define AR_SW_WOW_CONTROL               0x20018
 #define AR_SW_WOW_ENABLE                0x1
@@ -89,5 +119,9 @@
 #define AR_WOW_LENGTH1_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN1_SHIFT(_i))
 #define AR_WOW_LEN2_SHIFT(_i)           ((0x7 - ((_i) & 0x7)) << 0x3)
 #define AR_WOW_LENGTH2_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN2_SHIFT(_i))
+#define AR_WOW_LEN3_SHIFT(_i)           ((0xb - ((_i) & 0xb)) << 0x3)
+#define AR_WOW_LENGTH3_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN3_SHIFT(_i))
+#define AR_WOW_LEN4_SHIFT(_i)           ((0xf - ((_i) & 0xf)) << 0x3)
+#define AR_WOW_LENGTH4_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN4_SHIFT(_i))
 
 #endif /* REG_WOW_H */
-- 
cgit v1.1


From e68e9c10fbe0d4e49732783aae534ba0a328887f Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 2 Feb 2015 18:21:09 +0530
Subject: ath9k: Register correct WOW details with mac80211

Since the number of user patterns is higher for
newer chips, make sure that this is registered
during initialization.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/wow.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/wow.c b/drivers/net/wireless/ath/ath9k/wow.c
index 5092939..8d0b173 100644
--- a/drivers/net/wireless/ath/ath9k/wow.c
+++ b/drivers/net/wireless/ath/ath9k/wow.c
@@ -16,13 +16,20 @@
 
 #include "ath9k.h"
 
-static const struct wiphy_wowlan_support ath9k_wowlan_support = {
+static const struct wiphy_wowlan_support ath9k_wowlan_support_legacy = {
 	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
 	.n_patterns = MAX_NUM_USER_PATTERN,
 	.pattern_min_len = 1,
 	.pattern_max_len = MAX_PATTERN_SIZE,
 };
 
+static const struct wiphy_wowlan_support ath9k_wowlan_support = {
+	.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT,
+	.n_patterns = MAX_NUM_PATTERN - 2,
+	.pattern_min_len = 1,
+	.pattern_max_len = MAX_PATTERN_SIZE,
+};
+
 static u8 ath9k_wow_map_triggers(struct ath_softc *sc,
 				 struct cfg80211_wowlan *wowlan)
 {
@@ -320,9 +327,14 @@ void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled)
 void ath9k_init_wow(struct ieee80211_hw *hw)
 {
 	struct ath_softc *sc = hw->priv;
+	struct ath_hw *ah = sc->sc_ah;
 
 	if ((sc->driver_data & ATH9K_PCI_WOW) || sc->force_wow) {
-		hw->wiphy->wowlan = &ath9k_wowlan_support;
+		if (AR_SREV_9462_20_OR_LATER(ah) || AR_SREV_9565_11_OR_LATER(ah))
+			hw->wiphy->wowlan = &ath9k_wowlan_support;
+		else
+			hw->wiphy->wowlan = &ath9k_wowlan_support_legacy;
+
 		device_init_wakeup(sc->dev, 1);
 	}
 }
-- 
cgit v1.1


From bb6313140b3c8356cf36675a8edbf6782dc6c3d0 Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 2 Feb 2015 18:21:10 +0530
Subject: ath9k: Fix issues with WoW enable

This patch addresses several issues with the
ath9k_hw_wow_enable() routine:

* The usage of set/clr variables is removed. Writing
  the required values to registers is cleaner.

* The shift value of 28 for the contention window field
  in AR_WOW_PATTERN is incorrect, change it to 27.

* Disabling Keep Alive needs to be done based on the
  LINK_CHANGE option. This is done unconditionally now,
  fix this.

* The workaround for the D1/D3 issue is required only
  for AR9462.

* The bitfield for enabling pattern matching for packets
  less than 256 bytes has expanded for new chips, handle
  this accordingly.

* General cleanup.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 181 ++++++++++++++--------------
 drivers/net/wireless/ath/ath9k/hw.h         |   2 +-
 drivers/net/wireless/ath/ath9k/reg_wow.h    |   5 +-
 3 files changed, 93 insertions(+), 95 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
index 4b53d0b..6ffa0e0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_wow.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -222,14 +222,9 @@ EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
 void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 {
 	u32 wow_event_mask;
+	u32 keep_alive, magic_pattern, host_pm_ctrl;
 	u32 set, clr;
 
-	/*
-	 * wow_event_mask is a mask to the AR_WOW_PATTERN register to
-	 * indicate which WoW events we have enabled. The WoW events
-	 * are from the 'pattern_enable' in this function and
-	 * 'pattern_count' of ath9k_hw_wow_apply_pattern()
-	 */
 	wow_event_mask = ah->wow.wow_event_mask;
 
 	/*
@@ -249,152 +244,154 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 	}
 
 	/*
-	 * set the power states appropriately and enable PME
+	 * AR_PMCTRL_HOST_PME_EN - Override PME enable in configuration
+	 *                         space and allow MAC to generate WoW anyway.
+	 *
+	 * AR_PMCTRL_PWR_PM_CTRL_ENA - ???
+	 *
+	 * AR_PMCTRL_AUX_PWR_DET - PCI core SYS_AUX_PWR_DET signal,
+	 *                         needs to be set for WoW in PCI mode.
+	 *
+	 * AR_PMCTRL_WOW_PME_CLR - WoW Clear Signal going to the MAC.
+	 *
+	 * Set the power states appropriately and enable PME.
+	 *
+	 * Set and clear WOW_PME_CLEAR for the chip
+	 * to generate next wow signal.
 	 */
-	set = AR_PMCTRL_HOST_PME_EN | AR_PMCTRL_PWR_PM_CTRL_ENA |
-	      AR_PMCTRL_AUX_PWR_DET | AR_PMCTRL_WOW_PME_CLR;
+	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_HOST_PME_EN |
+		    			 AR_PMCTRL_PWR_PM_CTRL_ENA |
+		    			 AR_PMCTRL_AUX_PWR_DET |
+		    			 AR_PMCTRL_WOW_PME_CLR);
+	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, AR_PMCTRL_WOW_PME_CLR);
 
 	/*
-	 * set and clear WOW_PME_CLEAR registers for the chip
-	 * to generate next wow signal.
+	 * Random Backoff.
+	 *
+	 * 31:28 in AR_WOW_PATTERN : Indicates the number of bits used in the
+	 *                           contention window. For value N,
+	 *                           the random backoff will be selected between
+	 *                           0 and (2 ^ N) - 1.
 	 */
-	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
-	clr = AR_PMCTRL_WOW_PME_CLR;
-	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
+	REG_SET_BIT(ah, AR_WOW_PATTERN,
+		    AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF));
 
 	/*
-	 * Setup for:
-	 *	- beacon misses
-	 *	- magic pattern
-	 *	- keep alive timeout
-	 *	- pattern matching
+	 * AIFS time, Slot time, Keep Alive count.
 	 */
-
+	REG_SET_BIT(ah, AR_WOW_COUNT, AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
+		    		      AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
+		    		      AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT));
 	/*
-	 * Program default values for pattern backoff, aifs/slot/KAL count,
-	 * beacon miss timeout, KAL timeout, etc.
+	 * Beacon timeout.
 	 */
-	set = AR_WOW_BACK_OFF_SHIFT(AR_WOW_PAT_BACKOFF);
-	REG_SET_BIT(ah, AR_WOW_PATTERN, set);
-
-	set = AR_WOW_AIFS_CNT(AR_WOW_CNT_AIFS_CNT) |
-	      AR_WOW_SLOT_CNT(AR_WOW_CNT_SLOT_CNT) |
-	      AR_WOW_KEEP_ALIVE_CNT(AR_WOW_CNT_KA_CNT);
-	REG_SET_BIT(ah, AR_WOW_COUNT, set);
-
 	if (pattern_enable & AH_WOW_BEACON_MISS)
-		set = AR_WOW_BEACON_TIMO;
-	/* We are not using beacon miss, program a large value */
+		REG_WRITE(ah, AR_WOW_BCN_TIMO, AR_WOW_BEACON_TIMO);
 	else
-		set = AR_WOW_BEACON_TIMO_MAX;
-
-	REG_WRITE(ah, AR_WOW_BCN_TIMO, set);
+		REG_WRITE(ah, AR_WOW_BCN_TIMO, AR_WOW_BEACON_TIMO_MAX);
 
 	/*
-	 * Keep alive timo in ms except AR9280
+	 * Keep alive timeout in ms.
 	 */
 	if (!pattern_enable)
-		set = AR_WOW_KEEP_ALIVE_NEVER;
+		REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, AR_WOW_KEEP_ALIVE_NEVER);
 	else
-		set = KAL_TIMEOUT * 32;
-
-	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, set);
+		REG_WRITE(ah, AR_WOW_KEEP_ALIVE_TIMO, KAL_TIMEOUT * 32);
 
 	/*
-	 * Keep alive delay in us. based on 'power on clock',
-	 * therefore in usec
+	 * Keep alive delay in us.
 	 */
-	set = KAL_DELAY * 1000;
-	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, set);
+	REG_WRITE(ah, AR_WOW_KEEP_ALIVE_DELAY, KAL_DELAY * 1000);
 
 	/*
-	 * Create keep alive pattern to respond to beacons
+	 * Create keep alive pattern to respond to beacons.
 	 */
 	ath9k_wow_create_keep_alive_pattern(ah);
 
 	/*
-	 * Configure MAC WoW Registers
+	 * Configure keep alive register.
 	 */
-	set = 0;
+	keep_alive = REG_READ(ah, AR_WOW_KEEP_ALIVE);
+
 	/* Send keep alive timeouts anyway */
-	clr = AR_WOW_KEEP_ALIVE_AUTO_DIS;
+	keep_alive &= ~AR_WOW_KEEP_ALIVE_AUTO_DIS;
 
-	if (pattern_enable & AH_WOW_LINK_CHANGE)
+	if (pattern_enable & AH_WOW_LINK_CHANGE) {
+		keep_alive &= ~AR_WOW_KEEP_ALIVE_FAIL_DIS;
 		wow_event_mask |= AR_WOW_KEEP_ALIVE_FAIL;
-	else
-		set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
+	} else {
+		keep_alive |= AR_WOW_KEEP_ALIVE_FAIL_DIS;
+	}
 
-	set = AR_WOW_KEEP_ALIVE_FAIL_DIS;
-	REG_RMW(ah, AR_WOW_KEEP_ALIVE, set, clr);
+	REG_WRITE(ah, AR_WOW_KEEP_ALIVE, keep_alive);
 
 	/*
-	 * we are relying on a bmiss failure. ensure we have
-	 * enough threshold to prevent false positives
+	 * We are relying on a bmiss failure, ensure we have
+	 * enough threshold to prevent false positives.
 	 */
 	REG_RMW_FIELD(ah, AR_RSSI_THR, AR_RSSI_THR_BM_THR,
 		      AR_WOW_BMISSTHRESHOLD);
 
-	set = 0;
-	clr = 0;
-
 	if (pattern_enable & AH_WOW_BEACON_MISS) {
-		set = AR_WOW_BEACON_FAIL_EN;
 		wow_event_mask |= AR_WOW_BEACON_FAIL;
+		REG_SET_BIT(ah, AR_WOW_BCN_EN, AR_WOW_BEACON_FAIL_EN);
 	} else {
-		clr = AR_WOW_BEACON_FAIL_EN;
+		REG_CLR_BIT(ah, AR_WOW_BCN_EN, AR_WOW_BEACON_FAIL_EN);
 	}
 
-	REG_RMW(ah, AR_WOW_BCN_EN, set, clr);
-
-	set = 0;
-	clr = 0;
 	/*
-	 * Enable the magic packet registers
+	 * Enable the magic packet registers.
 	 */
+	magic_pattern = REG_READ(ah, AR_WOW_PATTERN);
+	magic_pattern |= AR_WOW_MAC_INTR_EN;
+
 	if (pattern_enable & AH_WOW_MAGIC_PATTERN_EN) {
-		set = AR_WOW_MAGIC_EN;
+		magic_pattern |= AR_WOW_MAGIC_EN;
 		wow_event_mask |= AR_WOW_MAGIC_PAT_FOUND;
 	} else {
-		clr = AR_WOW_MAGIC_EN;
+		magic_pattern &= ~AR_WOW_MAGIC_EN;
 	}
-	set |= AR_WOW_MAC_INTR_EN;
-	REG_RMW(ah, AR_WOW_PATTERN, set, clr);
 
+	REG_WRITE(ah, AR_WOW_PATTERN, magic_pattern);
+
+	/*
+	 * Enable pattern matching for packets which are less
+	 * than 256 bytes.
+	 */
 	REG_WRITE(ah, AR_WOW_PATTERN_MATCH_LT_256B,
 		  AR_WOW_PATTERN_SUPPORTED);
 
 	/*
-	 * Set the power states appropriately and enable PME
+	 * Set the power states appropriately and enable PME.
 	 */
-	clr = 0;
-	set = AR_PMCTRL_PWR_STATE_D1D3 | AR_PMCTRL_HOST_PME_EN |
-	      AR_PMCTRL_PWR_PM_CTRL_ENA;
+	host_pm_ctrl = REG_READ(ah, AR_PCIE_PM_CTRL);
+	host_pm_ctrl |= AR_PMCTRL_PWR_STATE_D1D3 |
+			AR_PMCTRL_HOST_PME_EN |
+			AR_PMCTRL_PWR_PM_CTRL_ENA;
+	host_pm_ctrl &= ~AR_PCIE_PM_CTRL_ENA;
 
-	clr = AR_PCIE_PM_CTRL_ENA;
-	REG_RMW(ah, AR_PCIE_PM_CTRL, set, clr);
+	if (AR_SREV_9462(ah)) {
+		/*
+		 * This is needed to prevent the chip waking up
+		 * the host within 3-4 seconds with certain
+		 * platform/BIOS.
+		 */
+		host_pm_ctrl &= ~AR_PMCTRL_PWR_STATE_D1D3;
+		host_pm_ctrl |= AR_PMCTRL_PWR_STATE_D1D3_REAL;
+	}
+
+	REG_WRITE(ah, AR_PCIE_PM_CTRL, host_pm_ctrl);
 
 	/*
-	 * this is needed to prevent the chip waking up
-	 * the host within 3-4 seconds with certain
-	 * platform/BIOS. The fix is to enable
-	 * D1 & D3 to match original definition and
-	 * also match the OTP value. Anyway this
-	 * is more related to SW WOW.
+	 * Enable sequence number generation when asleep.
 	 */
-	clr = AR_PMCTRL_PWR_STATE_D1D3;
-	REG_CLR_BIT(ah, AR_PCIE_PM_CTRL, clr);
-
-	set = AR_PMCTRL_PWR_STATE_D1D3_REAL;
-	REG_SET_BIT(ah, AR_PCIE_PM_CTRL, set);
-
 	REG_CLR_BIT(ah, AR_STA_ID1, AR_STA_ID1_PRESERVE_SEQNUM);
 
-	/* to bring down WOW power low margin */
-	set = BIT(13);
-	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, set);
+	/* To bring down WOW power low margin */
+	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, BIT(13));
+
 	/* HW WoW */
-	clr = BIT(5);
-	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, clr);
+	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, BIT(5));
 
 	ath9k_hw_set_powermode_wow_sleep(ah);
 	ah->wow.wow_event_mask = wow_event_mask;
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index c8b3d8f..e82e570 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -199,7 +199,7 @@
 #define KAL_NUM_DESC_WORDS	12
 #define KAL_ANTENNA_MODE	1
 #define KAL_TO_DS		1
-#define KAL_DELAY		4	/*delay of 4ms between 2 KAL frames */
+#define KAL_DELAY		4	/* delay of 4ms between 2 KAL frames */
 #define KAL_TIMEOUT		900
 
 #define MAX_PATTERN_SIZE		256
diff --git a/drivers/net/wireless/ath/ath9k/reg_wow.h b/drivers/net/wireless/ath/ath9k/reg_wow.h
index 83f27f9..3abfca5 100644
--- a/drivers/net/wireless/ath/ath9k/reg_wow.h
+++ b/drivers/net/wireless/ath/ath9k/reg_wow.h
@@ -68,7 +68,7 @@
 #define AR_CLR_MAC_INTERRUPT            0x20
 #define AR_CLR_KA_INTERRUPT             0x40
 
-#define AR_WOW_BACK_OFF_SHIFT(x)        ((x & 0xf) << 28) /* in usecs */
+#define AR_WOW_BACK_OFF_SHIFT(x)        ((x & 0xf) << 27) /* in usecs */
 #define AR_WOW_MAC_INTR_EN              0x00040000
 #define AR_WOW_MAGIC_EN                 0x00010000
 #define AR_WOW_PATTERN_EN(x)            (x & 0xff)
@@ -113,7 +113,8 @@
 #define AR_WOW_KA_DESC_WORD2            0xe000
 #define AR_WOW_TB_PATTERN(i)            (0xe100 + (i << 8))
 #define AR_WOW_TB_MASK(i)               (0xec00 + (i << 5))
-#define AR_WOW_PATTERN_SUPPORTED        0xff
+#define AR_WOW_PATTERN_SUPPORTED_LEGACY 0xff
+#define AR_WOW_PATTERN_SUPPORTED        0xffff
 #define AR_WOW_LENGTH_MAX               0xff
 #define AR_WOW_LEN1_SHIFT(_i)           ((0x3 - ((_i) & 0x3)) << 0x3)
 #define AR_WOW_LENGTH1_MASK(_i)         (AR_WOW_LENGTH_MAX << AR_WOW_LEN1_SHIFT(_i))
-- 
cgit v1.1


From b6f68b1ecbffc0aec1704c731c3b99acbe3becfd Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 2 Feb 2015 18:21:11 +0530
Subject: ath9k: Program AR_WA correctly

Setting the required configuration in the PCIE
WorkAround register needs to be done after all the
WoW parameters have been set.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 39 ++++++++++++++++-------------
 1 file changed, 22 insertions(+), 17 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
index 6ffa0e0..cf45b91 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_wow.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -219,31 +219,34 @@ u32 ath9k_hw_wow_wakeup(struct ath_hw *ah)
 }
 EXPORT_SYMBOL(ath9k_hw_wow_wakeup);
 
+static void ath9k_hw_wow_set_arwr_reg(struct ath_hw *ah)
+{
+	u32 wa_reg;
+
+	if (!ah->is_pciexpress)
+		return;
+
+	/*
+	 * We need to untie the internal POR (power-on-reset)
+	 * to the external PCI-E reset. We also need to tie
+	 * the PCI-E Phy reset to the PCI-E reset.
+	 */
+	wa_reg = REG_READ(ah, AR_WA);
+	wa_reg &= ~AR_WA_UNTIE_RESET_EN;
+	wa_reg |= AR_WA_RESET_EN;
+	wa_reg |= AR_WA_POR_SHORT;
+
+	REG_WRITE(ah, AR_WA, wa_reg);
+}
+
 void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 {
 	u32 wow_event_mask;
 	u32 keep_alive, magic_pattern, host_pm_ctrl;
-	u32 set, clr;
 
 	wow_event_mask = ah->wow.wow_event_mask;
 
 	/*
-	 * Untie Power-on-Reset from the PCI-E-Reset. When we are in
-	 * WOW sleep, we do want the Reset from the PCI-E to disturb
-	 * our hw state
-	 */
-	if (ah->is_pciexpress) {
-		/*
-		 * we need to untie the internal POR (power-on-reset)
-		 * to the external PCI-E reset. We also need to tie
-		 * the PCI-E Phy reset to the PCI-E reset.
-		 */
-		set = AR_WA_RESET_EN | AR_WA_POR_SHORT;
-		clr = AR_WA_UNTIE_RESET_EN | AR_WA_D3_L1_DISABLE;
-		REG_RMW(ah, AR_WA, set, clr);
-	}
-
-	/*
 	 * AR_PMCTRL_HOST_PME_EN - Override PME enable in configuration
 	 *                         space and allow MAC to generate WoW anyway.
 	 *
@@ -390,6 +393,8 @@ void ath9k_hw_wow_enable(struct ath_hw *ah, u32 pattern_enable)
 	/* To bring down WOW power low margin */
 	REG_SET_BIT(ah, AR_PCIE_PHY_REG3, BIT(13));
 
+	ath9k_hw_wow_set_arwr_reg(ah);
+
 	/* HW WoW */
 	REG_CLR_BIT(ah, AR_PCU_MISC_MODE3, BIT(5));
 
-- 
cgit v1.1


From 23ee7c33aa7caae5985a919e597ba2e355d540ea Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 2 Feb 2015 18:21:12 +0530
Subject: ath9k: Clear TSF2 properly

Chips in the AR9003 family have a second TSF, which
needs to be cleared when putting the card to
sleep.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 9 +++++++++
 drivers/net/wireless/ath/ath9k/reg.h        | 2 ++
 2 files changed, 11 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
index cf45b91..2dc50a0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_wow.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -35,6 +35,15 @@ static void ath9k_hw_set_powermode_wow_sleep(struct ath_hw *ah)
 		return;
 	}
 
+	if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) {
+		if (!REG_READ(ah, AR_MAC_PCU_GEN_TIMER_TSF_SEL))
+			REG_CLR_BIT(ah, AR_DIRECT_CONNECT, AR_DC_TSF2_ENABLE);
+	} else if (AR_SREV_9485(ah)){
+		if (!(REG_READ(ah, AR_NDP2_TIMER_MODE) &
+		      AR_GEN_TIMERS2_MODE_ENABLE_MASK))
+			REG_CLR_BIT(ah, AR_DIRECT_CONNECT, AR_DC_TSF2_ENABLE);
+	}
+
 	REG_WRITE(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_ON_INT);
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index b1b803d..9587ec6 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1883,6 +1883,7 @@ enum {
 #define AR_FIRST_NDP_TIMER                  7
 #define AR_NDP2_PERIOD                      0x81a0
 #define AR_NDP2_TIMER_MODE                  0x81c0
+#define AR_GEN_TIMERS2_MODE_ENABLE_MASK     0x000000FF
 
 #define AR_GEN_TIMERS(_i)                   (0x8200 + ((_i) << 2))
 #define AR_NEXT_TBTT_TIMER                  AR_GEN_TIMERS(0)
@@ -1978,6 +1979,7 @@ enum {
 
 #define AR_DIRECT_CONNECT                              0x83a0
 #define AR_DC_AP_STA_EN                                0x00000001
+#define AR_DC_TSF2_ENABLE                              0x00000001
 
 #define AR_AES_MUTE_MASK0       0x805c
 #define AR_AES_MUTE_MASK0_FC    0x0000FFFF
-- 
cgit v1.1


From c20bbda32a1f5b8293abae9bc39ad964d017afea Mon Sep 17 00:00:00 2001
From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 2 Feb 2015 18:21:13 +0530
Subject: ath9k: Choose correct rate for 2GHz channel

Set the transmit rate for the keep-alive frames
as 1M/CCK when the current channel is in the
2GHz band.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/ar9003_wow.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_wow.c b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
index 2dc50a0..86bfc96 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_wow.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_wow.c
@@ -62,11 +62,15 @@ static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
 	/* set the transmit buffer */
 	ctl[0] = (KAL_FRAME_LEN | (MAX_RATE_POWER << 16));
 	ctl[1] = 0;
-	ctl[3] = 0xb;	/* OFDM_6M hardware value for this rate */
 	ctl[4] = 0;
 	ctl[7] = (ah->txchainmask) << 2;
 	ctl[2] = 0xf << 16; /* tx_tries 0 */
 
+	if (IS_CHAN_2GHZ(ah->curchan))
+		ctl[3] = 0x1b;	/* CCK_1M */
+	else
+		ctl[3] = 0xb;	/* OFDM_6M */
+
 	for (i = 0; i < KAL_NUM_DESC_WORDS; i++)
 		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + i * 4), ctl[i]);
 
-- 
cgit v1.1


From 8bfae4f9938b6c1f033a5159febe97e441d6d526 Mon Sep 17 00:00:00 2001
From: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Date: Wed, 4 Feb 2015 00:21:13 +0300
Subject: ath5k: fix spontaneus AR5312 freezes

Sometimes while CPU have some load and ath5k doing the wireless
interface reset the whole WiSoC completely freezes. Set of tests shows
that using atomic delay function while we wait interface reset helps to
avoid such freezes.

The easiest way to reproduce this issue: create a station interface,
start continous scan with wpa_supplicant and load CPU by something. Or
just create multiple station interfaces and put them all in continous
scan.

This patch partially reverts the commit 1846ac3dbec0 ("ath5k: Use
usleep_range where possible"), which replaces initial udelay()
by usleep_range().

I do not know actual source of this issue, but all looks like that HW
freeze is caused by transaction on internal SoC bus, while wireless
block is in reset state.

Also I should note that I do not know how many chips are affected, but I
did not see this issue with chips, other than AR5312.

CC: Jiri Slaby <jirislaby@gmail.com>
CC: Nick Kossifidis <mickflemm@gmail.com>
CC: Luis R. Rodriguez <mcgrof@do-not-panic.com>
Fixes: 1846ac3dbec0 ("ath5k: Use usleep_range where possible")
Reported-by: Christophe Prevotaux <c.prevotaux@rural-networks.com>
Tested-by: Christophe Prevotaux <c.prevotaux@rural-networks.com>
Tested-by: Eric Bree <ebree@nltinc.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath5k/reset.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index a3399c4..b9b651e 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -478,7 +478,7 @@ ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
 	regval = ioread32(reg);
 	iowrite32(regval | val, reg);
 	regval = ioread32(reg);
-	usleep_range(100, 150);
+	udelay(100);	/* NB: should be atomic */
 
 	/* Bring BB/MAC out of reset */
 	iowrite32(regval & ~val, reg);
-- 
cgit v1.1


From 4d24550112311a2c053c539b0ea0521c42fc9305 Mon Sep 17 00:00:00 2001
From: Nicholas Mc Guire <hofrat@osadl.org>
Date: Wed, 4 Feb 2015 02:39:49 -0500
Subject: cw1200: use msecs_to_jiffies for conversion

This is only an API consolidation to make things more readable.
Instances of  HZ / CONST  are replaced by appropriate msecs_to_jiffies().

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/cw1200/scan.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/cw1200/scan.c b/drivers/net/wireless/cw1200/scan.c
index f2e276f..bff81b8 100644
--- a/drivers/net/wireless/cw1200/scan.c
+++ b/drivers/net/wireless/cw1200/scan.c
@@ -39,9 +39,9 @@ static int cw1200_scan_start(struct cw1200_common *priv, struct wsm_scan *scan)
 	cancel_delayed_work_sync(&priv->clear_recent_scan_work);
 	atomic_set(&priv->scan.in_progress, 1);
 	atomic_set(&priv->recent_scan, 1);
-	cw1200_pm_stay_awake(&priv->pm_state, tmo * HZ / 1000);
+	cw1200_pm_stay_awake(&priv->pm_state, msecs_to_jiffies(tmo));
 	queue_delayed_work(priv->workqueue, &priv->scan.timeout,
-			   tmo * HZ / 1000);
+			   msecs_to_jiffies(tmo));
 	ret = wsm_scan(priv, scan);
 	if (ret) {
 		atomic_set(&priv->scan.in_progress, 0);
@@ -386,8 +386,8 @@ void cw1200_probe_work(struct work_struct *work)
 	if (down_trylock(&priv->scan.lock)) {
 		/* Scan is already in progress. Requeue self. */
 		schedule();
-		queue_delayed_work(priv->workqueue,
-				   &priv->scan.probe_work, HZ / 10);
+		queue_delayed_work(priv->workqueue, &priv->scan.probe_work,
+				   msecs_to_jiffies(100));
 		mutex_unlock(&priv->conf_mutex);
 		return;
 	}
-- 
cgit v1.1


From ab458cc85fa23fd6367493b0668e126a6a552f32 Mon Sep 17 00:00:00 2001
From: Nicholas Mc Guire <hofrat@osadl.org>
Date: Wed, 4 Feb 2015 03:07:39 -0500
Subject: orinoco: orinoco_plx use msecs_to_jiffies for conversion

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/orinoco/orinoco_plx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c
index b8f6e5c..8b04523 100644
--- a/drivers/net/wireless/orinoco/orinoco_plx.c
+++ b/drivers/net/wireless/orinoco/orinoco_plx.c
@@ -121,7 +121,7 @@ static int orinoco_plx_cor_reset(struct orinoco_private *priv)
 	mdelay(1);
 
 	/* Just in case, wait more until the card is no longer busy */
-	timeout = jiffies + (PLX_RESET_TIME * HZ / 1000);
+	timeout = jiffies + msecs_to_jiffies(PLX_RESET_TIME);
 	reg = hermes_read_regn(hw, CMD);
 	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
 		mdelay(1);
-- 
cgit v1.1


From 3427da4597ae2bf909a7f6f0c7bc48b07215c009 Mon Sep 17 00:00:00 2001
From: Nicholas Mc Guire <hofrat@osadl.org>
Date: Wed, 4 Feb 2015 03:07:40 -0500
Subject: orinoco: orinoco_pci use msecs_to_jiffies for conversion

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/orinoco/orinoco_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c
index b6bdad6..74219d5 100644
--- a/drivers/net/wireless/orinoco/orinoco_pci.c
+++ b/drivers/net/wireless/orinoco/orinoco_pci.c
@@ -94,7 +94,7 @@ static int orinoco_pci_cor_reset(struct orinoco_private *priv)
 	mdelay(HERMES_PCI_COR_OFFT);
 
 	/* The card is ready when it's no longer busy */
-	timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000);
+	timeout = jiffies + msecs_to_jiffies(HERMES_PCI_COR_BUSYT);
 	reg = hermes_read_regn(hw, CMD);
 	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
 		mdelay(1);
-- 
cgit v1.1


From c1f1f6663b3c749dd9eba9eaeb178859080104e2 Mon Sep 17 00:00:00 2001
From: Nicholas Mc Guire <hofrat@osadl.org>
Date: Wed, 4 Feb 2015 03:07:41 -0500
Subject: orinoco: orinoco_tmd use msecs_to_jiffies for conversion

This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/orinoco/orinoco_tmd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c
index 79d0e33..20ce569 100644
--- a/drivers/net/wireless/orinoco/orinoco_tmd.c
+++ b/drivers/net/wireless/orinoco/orinoco_tmd.c
@@ -71,7 +71,7 @@ static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
 	mdelay(1);
 
 	/* Just in case, wait more until the card is no longer busy */
-	timeout = jiffies + (TMD_RESET_TIME * HZ / 1000);
+	timeout = jiffies + msecs_to_jiffies(TMD_RESET_TIME);
 	reg = hermes_read_regn(hw, CMD);
 	while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
 		mdelay(1);
-- 
cgit v1.1


From df970d39b90e0c316c62a9db6d796edef2a31526 Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 4 Feb 2015 16:32:15 +0100
Subject: cw1200: Delete an unnecessary check before the function call
 "release_firmware"

The release_firmware() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/cw1200/fwio.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/cw1200/fwio.c b/drivers/net/wireless/cw1200/fwio.c
index 6f1b9aa..581dfde 100644
--- a/drivers/net/wireless/cw1200/fwio.c
+++ b/drivers/net/wireless/cw1200/fwio.c
@@ -246,8 +246,7 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 
 error:
 	kfree(buf);
-	if (firmware)
-		release_firmware(firmware);
+	release_firmware(firmware);
 	return ret;
 
 #undef APB_WRITE
-- 
cgit v1.1


From ee4ddad82356116351660b0adfcb8e837eda371f Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 4 Feb 2015 17:28:41 +0100
Subject: cw1200: Less function calls in cw1200_load_firmware_cw1200() after
 error detection

The functions kfree() and release_firmware() were called in a few cases
by the cw1200_load_firmware_cw1200() function during error handling even if
the passed variables contained still a null pointer.

Corresponding implementation details could be improved by adjustments for
jump targets.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/cw1200/fwio.c | 37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/cw1200/fwio.c b/drivers/net/wireless/cw1200/fwio.c
index 581dfde..30e7646 100644
--- a/drivers/net/wireless/cw1200/fwio.c
+++ b/drivers/net/wireless/cw1200/fwio.c
@@ -66,25 +66,31 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 	do { \
 		ret = cw1200_apb_write_32(priv, CW1200_APB(reg), (val)); \
 		if (ret < 0) \
-			goto error; \
+			goto exit; \
+	} while (0)
+#define APB_WRITE2(reg, val) \
+	do { \
+		ret = cw1200_apb_write_32(priv, CW1200_APB(reg), (val)); \
+		if (ret < 0) \
+			goto free_buffer; \
 	} while (0)
 #define APB_READ(reg, val) \
 	do { \
 		ret = cw1200_apb_read_32(priv, CW1200_APB(reg), &(val)); \
 		if (ret < 0) \
-			goto error; \
+			goto free_buffer; \
 	} while (0)
 #define REG_WRITE(reg, val) \
 	do { \
 		ret = cw1200_reg_write_32(priv, (reg), (val)); \
 		if (ret < 0) \
-			goto error; \
+			goto exit; \
 	} while (0)
 #define REG_READ(reg, val) \
 	do { \
 		ret = cw1200_reg_read_32(priv, (reg), &(val)); \
 		if (ret < 0) \
-			goto error; \
+			goto exit; \
 	} while (0)
 
 	switch (priv->hw_revision) {
@@ -142,14 +148,14 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 	ret = request_firmware(&firmware, fw_path, priv->pdev);
 	if (ret) {
 		pr_err("Can't load firmware file %s.\n", fw_path);
-		goto error;
+		goto exit;
 	}
 
 	buf = kmalloc(DOWNLOAD_BLOCK_SIZE, GFP_KERNEL | GFP_DMA);
 	if (!buf) {
 		pr_err("Can't allocate firmware load buffer.\n");
 		ret = -ENOMEM;
-		goto error;
+		goto firmware_release;
 	}
 
 	/* Check if the bootloader is ready */
@@ -163,7 +169,7 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 	if (val32 != DOWNLOAD_I_AM_HERE) {
 		pr_err("Bootloader is not ready.\n");
 		ret = -ETIMEDOUT;
-		goto error;
+		goto free_buffer;
 	}
 
 	/* Calculcate number of download blocks */
@@ -171,7 +177,7 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 
 	/* Updating the length in Download Ctrl Area */
 	val32 = firmware->size; /* Explicit cast from size_t to u32 */
-	APB_WRITE(DOWNLOAD_IMAGE_SIZE_REG, val32);
+	APB_WRITE2(DOWNLOAD_IMAGE_SIZE_REG, val32);
 
 	/* Firmware downloading loop */
 	for (block = 0; block < num_blocks; block++) {
@@ -183,7 +189,7 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 		if (val32 != DOWNLOAD_PENDING) {
 			pr_err("Bootloader reported error %d.\n", val32);
 			ret = -EIO;
-			goto error;
+			goto free_buffer;
 		}
 
 		/* loop until put - get <= 24K */
@@ -198,7 +204,7 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 		if ((put - get) > (DOWNLOAD_FIFO_SIZE - DOWNLOAD_BLOCK_SIZE)) {
 			pr_err("Timeout waiting for FIFO.\n");
 			ret = -ETIMEDOUT;
-			goto error;
+			goto free_buffer;
 		}
 
 		/* calculate the block size */
@@ -220,12 +226,12 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 		if (ret < 0) {
 			pr_err("Can't write firmware block @ %d!\n",
 			       put & (DOWNLOAD_FIFO_SIZE - 1));
-			goto error;
+			goto free_buffer;
 		}
 
 		/* update the put register */
 		put += block_size;
-		APB_WRITE(DOWNLOAD_PUT_REG, put);
+		APB_WRITE2(DOWNLOAD_PUT_REG, put);
 	} /* End of firmware download loop */
 
 	/* Wait for the download completion */
@@ -238,18 +244,21 @@ static int cw1200_load_firmware_cw1200(struct cw1200_common *priv)
 	if (val32 != DOWNLOAD_SUCCESS) {
 		pr_err("Wait for download completion failed: 0x%.8X\n", val32);
 		ret = -ETIMEDOUT;
-		goto error;
+		goto free_buffer;
 	} else {
 		pr_info("Firmware download completed.\n");
 		ret = 0;
 	}
 
-error:
+free_buffer:
 	kfree(buf);
+firmware_release:
 	release_firmware(firmware);
+exit:
 	return ret;
 
 #undef APB_WRITE
+#undef APB_WRITE2
 #undef APB_READ
 #undef REG_WRITE
 #undef REG_READ
-- 
cgit v1.1


From c0420ea0b598021302b1e1f0f28d621f93968e5d Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 4 Feb 2015 18:48:28 +0100
Subject: ath9k: Delete an unnecessary check before the function call
 "relay_close"

The relay_close() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/ath/ath9k/common-spectral.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath9k/common-spectral.c b/drivers/net/wireless/ath/ath9k/common-spectral.c
index ec93ddf..5cee231 100644
--- a/drivers/net/wireless/ath/ath9k/common-spectral.c
+++ b/drivers/net/wireless/ath/ath9k/common-spectral.c
@@ -582,7 +582,7 @@ static struct rchan_callbacks rfs_spec_scan_cb = {
 
 void ath9k_cmn_spectral_deinit_debug(struct ath_spec_scan_priv *spec_priv)
 {
-	if (config_enabled(CONFIG_ATH9K_DEBUGFS) && spec_priv->rfs_chan_spec_scan) {
+	if (config_enabled(CONFIG_ATH9K_DEBUGFS)) {
 		relay_close(spec_priv->rfs_chan_spec_scan);
 		spec_priv->rfs_chan_spec_scan = NULL;
 	}
-- 
cgit v1.1


From 71b9d0aeac4c7070229f309bc901382422ab5708 Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 4 Feb 2015 19:53:11 +0100
Subject: orinoco: Delete an unnecessary check before the function call "kfree"

The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/orinoco/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 38ec8d1..c410180 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -2342,7 +2342,7 @@ void free_orinocodev(struct orinoco_private *priv)
 	list_for_each_entry_safe(sd, sdtemp, &priv->scan_list, list) {
 		list_del(&sd->list);
 
-		if ((sd->len > 0) && sd->buf)
+		if (sd->len > 0)
 			kfree(sd->buf);
 		kfree(sd);
 	}
-- 
cgit v1.1


From 6f24fe305986afcb9eb2bde1031798b3b2ebf649 Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 4 Feb 2015 20:06:39 +0100
Subject: hostap: Delete an unnecessary check before the function call "kfree"

The kfree() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/hostap/hostap_ap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 5965255..fd8d83d 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -145,7 +145,7 @@ static void ap_free_sta(struct ap_data *ap, struct sta_info *sta)
 	if (sta->aid > 0)
 		ap->sta_aid[sta->aid - 1] = NULL;
 
-	if (!sta->ap && sta->u.sta.challenge)
+	if (!sta->ap)
 		kfree(sta->u.sta.challenge);
 	del_timer_sync(&sta->timer);
 #endif /* PRISM2_NO_KERNEL_IEEE80211_MGMT */
-- 
cgit v1.1


From 297540f69fa9c7292c9866e71cb22a7bc4c5003b Mon Sep 17 00:00:00 2001
From: Markus Elfring <elfring@users.sourceforge.net>
Date: Wed, 4 Feb 2015 20:28:49 +0100
Subject: brcm80211: Delete unnecessary checks before two function calls

The functions brcmu_pkt_buf_free_skb() and usb_free_urb() test whether
their argument is NULL and then return immediately. Thus the test around
the call is not needed.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
 drivers/net/wireless/brcm80211/brcmfmac/sdio.c | 3 +--
 drivers/net/wireless/brcm80211/brcmfmac/usb.c  | 2 +-
 2 files changed, 2 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
index 5e9d208..faec35c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio.c
@@ -2538,8 +2538,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
 	brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
 
 	/* Clear any held glomming stuff */
-	if (bus->glomd)
-		brcmu_pkt_buf_free_skb(bus->glomd);
+	brcmu_pkt_buf_free_skb(bus->glomd);
 	brcmf_sdio_free_glom(bus);
 
 	/* Clear rx control and wake any waiters */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
index 1b95729..5df6aa7 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c
@@ -421,7 +421,7 @@ fail:
 	brcmf_err("fail!\n");
 	while (!list_empty(q)) {
 		req = list_entry(q->next, struct brcmf_usbreq, list);
-		if (req && req->urb)
+		if (req)
 			usb_free_urb(req->urb);
 		list_del(q->next);
 	}
-- 
cgit v1.1