From a1923f1d4723e5757cefdd60f7c7ab30e472007a Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 18 Jul 2013 19:11:26 +0300 Subject: iwlwifi: add DELL SKU for 5150 HMC This SKU was missing in the list of supported devices https://bugzilla.kernel.org/show_bug.cgi?id=60577 Cc: [all versions] Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/drv.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 81f3ea5..ff13458 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -130,6 +130,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x423C, 0x1306, iwl5150_abg_cfg)}, /* Half Mini Card */ {IWL_PCI_DEVICE(0x423C, 0x1221, iwl5150_agn_cfg)}, /* Mini Card */ {IWL_PCI_DEVICE(0x423C, 0x1321, iwl5150_agn_cfg)}, /* Half Mini Card */ + {IWL_PCI_DEVICE(0x423C, 0x1326, iwl5150_abg_cfg)}, /* Half Mini Card */ {IWL_PCI_DEVICE(0x423D, 0x1211, iwl5150_agn_cfg)}, /* Mini Card */ {IWL_PCI_DEVICE(0x423D, 0x1311, iwl5150_agn_cfg)}, /* Half Mini Card */ -- cgit v1.1 From 5312e54d7e8bfe9716a1ffbc50e0093aadde46b8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 22 Jul 2013 18:26:56 +0200 Subject: iwlwifi: mvm: use only a single GTK in D3 Unfortunately, the firmware only supports replay counters for a single GTK in D3, so that we should only upload the last key and use its replay counters. Since mac80211 key iteration will walk through the keys in order of their addition, simply use the same HW key index (1) for all GTKs, thus overwriting previous ones with newer ones. The replay counters for it are already used. Reviewed-by: Yaron Vaknin Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/d3.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index 7e5e5c2..83da884 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -134,7 +134,7 @@ struct wowlan_key_data { struct iwl_wowlan_rsc_tsc_params_cmd *rsc_tsc; struct iwl_wowlan_tkip_params_cmd *tkip; bool error, use_rsc_tsc, use_tkip; - int gtk_key_idx; + int wep_key_idx; }; static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, @@ -188,8 +188,8 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, wkc.wep_key.key_offset = 0; } else { /* others start at 1 */ - data->gtk_key_idx++; - wkc.wep_key.key_offset = data->gtk_key_idx; + data->wep_key_idx++; + wkc.wep_key.key_offset = data->wep_key_idx; } ret = iwl_mvm_send_cmd_pdu(mvm, WEP_KEY, CMD_SYNC, @@ -316,8 +316,13 @@ static void iwl_mvm_wowlan_program_keys(struct ieee80211_hw *hw, mvm->ptk_ivlen = key->iv_len; mvm->ptk_icvlen = key->icv_len; } else { - data->gtk_key_idx++; - key->hw_key_idx = data->gtk_key_idx; + /* + * firmware only supports TSC/RSC for a single key, + * so if there are multiple keep overwriting them + * with new ones -- this relies on mac80211 doing + * list_add_tail(). + */ + key->hw_key_idx = 1; mvm->gtk_ivlen = key->iv_len; mvm->gtk_icvlen = key->icv_len; } -- cgit v1.1 From bb963c4a43eb5127eb0bbfa16c7a6a209b0af5db Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Tue, 23 Jul 2013 14:13:32 +0300 Subject: iwlwifi: mvm: set SSID bits for passive channels Set SSID bitmap for direct scan even on passive channels, for the passive-to-active feature. Without this patch only the SSID from probe request template is sent on passive channels, after passive-to-active switching, causing us to not find all desired networks. Remove the unused passive scan mask constant. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: David Spinadel Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 1 - drivers/net/wireless/iwlwifi/mvm/scan.c | 11 ++--------- 2 files changed, 2 insertions(+), 10 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index b60d141..365095a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -69,7 +69,6 @@ /* Scan Commands, Responses, Notifications */ /* Masks for iwl_scan_channel.type flags */ -#define SCAN_CHANNEL_TYPE_PASSIVE 0 #define SCAN_CHANNEL_TYPE_ACTIVE BIT(0) #define SCAN_CHANNEL_NARROW_BAND BIT(22) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 268f027..acdff6b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -178,19 +178,12 @@ static void iwl_mvm_scan_fill_channels(struct iwl_scan_cmd *cmd, struct iwl_scan_channel *chan = (struct iwl_scan_channel *) (cmd->data + le16_to_cpu(cmd->tx_cmd.len)); int i; - __le32 chan_type_value; - - if (req->n_ssids > 0) - chan_type_value = cpu_to_le32(BIT(req->n_ssids) - 1); - else - chan_type_value = SCAN_CHANNEL_TYPE_PASSIVE; for (i = 0; i < cmd->channel_count; i++) { chan->channel = cpu_to_le16(req->channels[i]->hw_value); + chan->type = cpu_to_le32(BIT(req->n_ssids) - 1); if (req->channels[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) - chan->type = SCAN_CHANNEL_TYPE_PASSIVE; - else - chan->type = chan_type_value; + chan->type &= cpu_to_le32(~SCAN_CHANNEL_TYPE_ACTIVE); chan->active_dwell = cpu_to_le16(active_dwell); chan->passive_dwell = cpu_to_le16(passive_dwell); chan->iteration_count = cpu_to_le16(1); -- cgit v1.1 From 2997494fa66a1c94717d69c3cfae0a94462093c6 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 24 Jul 2013 10:19:06 +0300 Subject: iwlwifi: pcie: reset the NIC before the bring up This allows to clean all kinds of bad state it might be in. This solves situation where HW RFkill was switched while the NIC was offline. Until now, we relied on the firmware to do clean the interrupt, but new firmwares don't do that any more. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/trans.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 826c156..96cfcdd 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -670,6 +670,11 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) return err; } + /* Reset the entire device */ + iwl_set_bit(trans, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); + + usleep_range(10, 15); + iwl_pcie_apm_init(trans); /* From now on, the op_mode will be kept updated about RF kill state */ -- cgit v1.1 From ea183d02e1ddfda1996d7df1e55f3a639830e335 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Tue, 23 Jul 2013 14:41:53 +0300 Subject: iwlwifi: mvm: Disable managed PS when GO is added The managed interface PS was not disabled when a GO interface was added. As a consequence, when the station VMAC was in PS, the GO also was not on the medium. Fix this. Signed-off-by: Ilan Peer Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 42 ++++++++++++++--------------- 1 file changed, 21 insertions(+), 21 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 1eedc42..f19baf0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -512,6 +512,27 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, goto out_unlock; /* + * TODO: remove this temporary code. + * Currently MVM FW supports power management only on single MAC. + * If new interface added, disable PM on existing interface. + * P2P device is a special case, since it is handled by FW similary to + * scan. If P2P deviced is added, PM remains enabled on existing + * interface. + * Note: the method below does not count the new interface being added + * at this moment. + */ + if (vif->type != NL80211_IFTYPE_P2P_DEVICE) + mvm->vif_count++; + if (mvm->vif_count > 1) { + IWL_DEBUG_MAC80211(mvm, + "Disable power on existing interfaces\n"); + ieee80211_iterate_active_interfaces_atomic( + mvm->hw, + IEEE80211_IFACE_ITER_NORMAL, + iwl_mvm_pm_disable_iterator, mvm); + } + + /* * The AP binding flow can be done only after the beacon * template is configured (which happens only in the mac80211 * start_ap() flow), and adding the broadcast station can happen @@ -534,27 +555,6 @@ static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, goto out_unlock; } - /* - * TODO: remove this temporary code. - * Currently MVM FW supports power management only on single MAC. - * If new interface added, disable PM on existing interface. - * P2P device is a special case, since it is handled by FW similary to - * scan. If P2P deviced is added, PM remains enabled on existing - * interface. - * Note: the method below does not count the new interface being added - * at this moment. - */ - if (vif->type != NL80211_IFTYPE_P2P_DEVICE) - mvm->vif_count++; - if (mvm->vif_count > 1) { - IWL_DEBUG_MAC80211(mvm, - "Disable power on existing interfaces\n"); - ieee80211_iterate_active_interfaces_atomic( - mvm->hw, - IEEE80211_IFACE_ITER_NORMAL, - iwl_mvm_pm_disable_iterator, mvm); - } - ret = iwl_mvm_mac_ctxt_add(mvm, vif); if (ret) goto out_release; -- cgit v1.1 From b6658ff80c43bcf84be0bbe371c88af1452e7776 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 24 Jul 2013 13:55:51 +0200 Subject: iwlwifi: mvm: fix flushing not started aggregation sessions When a not fully started aggregation session is destroyed and flushed, we get a warning, e.g. WARNING: at drivers/net/wireless/iwlwifi/pcie/tx.c:1142 iwl_trans_pcie_txq_disable+0x11c/0x160 queue 16 not used Modules linked in: [...] Pid: 5135, comm: hostapd Tainted: G W O 3.5.0 #10 Call Trace: wlan0: driver sets block=0 for sta 00:03:7f:10:44:d3 [] warn_slowpath_common+0x72/0xa0 [] warn_slowpath_fmt+0x47/0x50 [] iwl_trans_pcie_txq_disable+0x11c/0x160 [iwlwifi] [] iwl_mvm_sta_tx_agg_flush+0xe9/0x150 [iwlmvm] [] iwl_mvm_mac_ampdu_action+0xf3/0x1e0 [iwlmvm] [] ___ieee80211_stop_tx_ba_session+0x193/0x920 [mac80211] [] __ieee80211_stop_tx_ba_session+0x48/0x70 [mac80211] [] ieee80211_sta_tear_down_BA_sessions+0x4f/0x80 [mac80211] [] __sta_info_destroy+0x66/0x370 [mac80211] [] sta_info_destroy_addr_bss+0x44/0x70 [mac80211] [] ieee80211_del_station+0x26/0x50 [mac80211] [] nl80211_del_station+0x85/0x200 [cfg80211] when a station deauthenticated from us without fully setting up the aggregation session. Fix this by checking the aggregation state before removing the hardware queue. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/sta.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index 85d4bbe..563f559 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -915,6 +915,7 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, struct iwl_mvm_sta *mvmsta = (void *)sta->drv_priv; struct iwl_mvm_tid_data *tid_data = &mvmsta->tid_data[tid]; u16 txq_id; + enum iwl_mvm_agg_state old_state; /* * First set the agg state to OFF to avoid calling @@ -924,13 +925,17 @@ int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif, txq_id = tid_data->txq_id; IWL_DEBUG_TX_QUEUES(mvm, "Flush AGG: sta %d tid %d q %d state %d\n", mvmsta->sta_id, tid, txq_id, tid_data->state); + old_state = tid_data->state; tid_data->state = IWL_AGG_OFF; spin_unlock_bh(&mvmsta->lock); - if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true)) - IWL_ERR(mvm, "Couldn't flush the AGG queue\n"); + if (old_state >= IWL_AGG_ON) { + if (iwl_mvm_flush_tx_path(mvm, BIT(txq_id), true)) + IWL_ERR(mvm, "Couldn't flush the AGG queue\n"); + + iwl_trans_txq_disable(mvm->trans, tid_data->txq_id); + } - iwl_trans_txq_disable(mvm->trans, tid_data->txq_id); mvm->queue_to_mac80211[tid_data->txq_id] = IWL_INVALID_MAC80211_QUEUE; -- cgit v1.1 From a53ee0a308b16e392e0219c585b10f329345766b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 25 Jul 2013 13:14:34 +0300 Subject: iwlwifi: pcie: clear RFKILL interrupt in AMPG If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-prph.h | 2 ++ drivers/net/wireless/iwlwifi/pcie/rx.c | 8 ++++++++ 2 files changed, 10 insertions(+) (limited to 'drivers/net/wireless') diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index ff8cc75..a70c7b9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -97,6 +97,8 @@ #define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800) +#define APMG_RTC_INT_STT_RFKILL (0x10000000) + /* Device system time */ #define DEVICE_SYSTEM_TIME_REG 0xA0206C diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index fd848cd..f600e68 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -888,6 +888,14 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id) iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); if (hw_rfkill) { + /* + * Clear the interrupt in APMG if the NIC is going down. + * Note that when the NIC exits RFkill (else branch), we + * can't access prph and the NIC will be reset in + * start_hw anyway. + */ + iwl_write_prph(trans, APMG_RTC_INT_STT_REG, + APMG_RTC_INT_STT_RFKILL); set_bit(STATUS_RFKILL, &trans_pcie->status); if (test_and_clear_bit(STATUS_HCMD_ACTIVE, &trans_pcie->status)) -- cgit v1.1