From 7947d3e075cde1a18e538f2dafbc850aa356ff79 Mon Sep 17 00:00:00 2001 From: Avraham Stern Date: Tue, 5 Jul 2016 15:23:12 +0300 Subject: mac80211: Add support for beacon report radio measurement Add the following to support beacon report radio measurement with the measurement mode field set to passive or active: 1. Propagate the required scan duration to the device 2. Report the scan start time (in terms of TSF) 3. Report each BSS's detection time (also in terms of TSF) TSF times refer to the BSS that the interface that requested the scan is connected to. Signed-off-by: Assaf Krauss Signed-off-by: Avraham Stern [changed ath9k/10k, at76c59x-usb, iwlegacy, wl1251 and wlcore to match the new API] Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg --- drivers/net/wireless/st/cw1200/scan.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/net/wireless/st') diff --git a/drivers/net/wireless/st/cw1200/scan.c b/drivers/net/wireless/st/cw1200/scan.c index 9837881..0a0ff7e 100644 --- a/drivers/net/wireless/st/cw1200/scan.c +++ b/drivers/net/wireless/st/cw1200/scan.c @@ -167,6 +167,10 @@ void cw1200_scan_work(struct work_struct *work) } if (!priv->scan.req || (priv->scan.curr == priv->scan.end)) { + struct cfg80211_scan_info info = { + .aborted = priv->scan.status ? 1 : 0, + }; + if (priv->scan.output_power != priv->output_power) wsm_set_output_power(priv, priv->output_power * 10); if (priv->join_status == CW1200_JOIN_STATUS_STA && @@ -188,7 +192,7 @@ void cw1200_scan_work(struct work_struct *work) cw1200_scan_restart_delayed(priv); wsm_unlock_tx(priv); mutex_unlock(&priv->conf_mutex); - ieee80211_scan_completed(priv->hw, priv->scan.status ? 1 : 0); + ieee80211_scan_completed(priv->hw, &info); up(&priv->scan.lock); return; } else { -- cgit v1.1