From f1b00f4dab29b57bdf1bc03ef12020b280fd2a72 Mon Sep 17 00:00:00 2001 From: Forest Bond Date: Fri, 13 Jul 2012 12:26:06 -0400 Subject: rtlwifi: rtl8192de: Fix phy-based version calculation Commit d83579e2a50ac68389e6b4c58b845c702cf37516 incorporated some changes from the vendor driver that made it newly important that the calculated hardware version correctly include the CHIP_92D bit, as all of the IS_92D_* macros were changed to depend on it. However, this bit was being unset for dual-mac, dual-phy devices. The vendor driver behavior was modified to not do this, but unfortunately this change was not picked up along with the others. This caused scanning in the 2.4GHz band to be broken, and possibly other bugs as well. This patch brings the version calculation logic in parity with the vendor driver in this regard, and in doing so fixes the regression. However, the version calculation code in general continues to be largely incoherent and messy, and needs to be cleaned up. Signed-off-by: Forest Bond Cc: Stable [v3.2+] Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192de/phy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net/wireless/rtlwifi') diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c index 18380a7..4420312 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c @@ -3345,21 +3345,21 @@ void rtl92d_phy_config_macphymode_info(struct ieee80211_hw *hw) switch (rtlhal->macphymode) { case DUALMAC_SINGLEPHY: rtlphy->rf_type = RF_2T2R; - rtlhal->version |= CHIP_92D_SINGLEPHY; + rtlhal->version |= RF_TYPE_2T2R; rtlhal->bandset = BAND_ON_BOTH; rtlhal->current_bandtype = BAND_ON_2_4G; break; case SINGLEMAC_SINGLEPHY: rtlphy->rf_type = RF_2T2R; - rtlhal->version |= CHIP_92D_SINGLEPHY; + rtlhal->version |= RF_TYPE_2T2R; rtlhal->bandset = BAND_ON_BOTH; rtlhal->current_bandtype = BAND_ON_2_4G; break; case DUALMAC_DUALPHY: rtlphy->rf_type = RF_1T1R; - rtlhal->version &= (~CHIP_92D_SINGLEPHY); + rtlhal->version &= RF_TYPE_1T1R; /* Now we let MAC0 run on 5G band. */ if (rtlhal->interfaceindex == 0) { rtlhal->bandset = BAND_ON_5G; -- cgit v1.1