From 2be7d22f062535de59babdb4b5e9de9ff31e817e Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Thu, 20 Dec 2012 13:13:19 -0800 Subject: wireless: add new wil6210 802.11ad 60GHz driver This adds support for the 60 GHz 802.11ad Wilocity card through a new driver, wil6210. Wilocity implemented the firmware, QCA maintains the device driver. Currently supported: - STA: with security - AP: limited to 1 connected STA, security disabled - Monitor: due to a hardware/firmware limitation either control or non-control frames are monitored Using a STA and AP with this drive, one can assemble a fully functional BSS. Throughput of 1.2Gbps is achieved with iperf. The wil6210 cards have on-board flash memory for the firmware, the cards comes pre-flashed and no firmware download is required. For more details see: http://wireless.kernel.org/en/users/Drivers/wil6210 Signed-off-by: Vladimir Kondratiev Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/wireless/ath/Kconfig') diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig index 1a67a4f..2c02b4e 100644 --- a/drivers/net/wireless/ath/Kconfig +++ b/drivers/net/wireless/ath/Kconfig @@ -30,5 +30,6 @@ source "drivers/net/wireless/ath/ath9k/Kconfig" source "drivers/net/wireless/ath/carl9170/Kconfig" source "drivers/net/wireless/ath/ath6kl/Kconfig" source "drivers/net/wireless/ath/ar5523/Kconfig" +source "drivers/net/wireless/ath/wil6210/Kconfig" endif -- cgit v1.1