From 86a2f415e6cdc5dbb2163b31abf4d36f26f7e3da Mon Sep 17 00:00:00 2001 From: Phil Sutter Date: Thu, 14 Jun 2012 01:18:42 +0000 Subject: usbnet: sanitise overlong driver information strings As seen on smsc75xx, driver_info->description being longer than 32 characters messes up 'ethtool -i' output. Signed-off-by: Phil Sutter Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 9f58330..d4f7256 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -876,9 +876,9 @@ void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); - strncpy (info->driver, dev->driver_name, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); - strncpy (info->fw_version, dev->driver_info->description, + strlcpy (info->driver, dev->driver_name, sizeof info->driver); + strlcpy (info->version, DRIVER_VERSION, sizeof info->version); + strlcpy (info->fw_version, dev->driver_info->description, sizeof info->fw_version); usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); } -- cgit v1.1 From b9f90eb2740203ff2592efe640409ad48335d1c2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 21 Jun 2012 02:45:58 +0000 Subject: net: qmi_wwan: fix Gobi device probing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: Heinrich Siebmanns (Harvey) Cc: # v3.4: 0000188 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: # v3.4: f7142e6 USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: # v3.4 Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 83 ++++++++++++++++++++++------------------------ 1 file changed, 40 insertions(+), 43 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 3b20678..3767a12 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -257,29 +257,6 @@ err: return rv; } -/* Gobi devices uses identical class/protocol codes for all interfaces regardless - * of function. Some of these are CDC ACM like and have the exact same endpoints - * we are looking for. This leaves two possible strategies for identifying the - * correct interface: - * a) hardcoding interface number, or - * b) use the fact that the wwan interface is the only one lacking additional - * (CDC functional) descriptors - * - * Let's see if we can get away with the generic b) solution. - */ -static int qmi_wwan_bind_gobi(struct usbnet *dev, struct usb_interface *intf) -{ - int rv = -EINVAL; - - /* ignore any interface with additional descriptors */ - if (intf->cur_altsetting->extralen) - goto err; - - rv = qmi_wwan_bind_shared(dev, intf); -err: - return rv; -} - static void qmi_wwan_unbind_shared(struct usbnet *dev, struct usb_interface *intf) { struct usb_driver *subdriver = (void *)dev->data[0]; @@ -347,15 +324,15 @@ static const struct driver_info qmi_wwan_shared = { .manage_power = qmi_wwan_manage_power, }; -static const struct driver_info qmi_wwan_gobi = { - .description = "Qualcomm Gobi wwan/QMI device", +static const struct driver_info qmi_wwan_force_int0 = { + .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_gobi, + .bind = qmi_wwan_bind_shared, .unbind = qmi_wwan_unbind_shared, .manage_power = qmi_wwan_manage_power, + .data = BIT(0), /* interface whitelist bitmap */ }; -/* ZTE suck at making USB descriptors */ static const struct driver_info qmi_wwan_force_int1 = { .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, @@ -365,6 +342,15 @@ static const struct driver_info qmi_wwan_force_int1 = { .data = BIT(1), /* interface whitelist bitmap */ }; +static const struct driver_info qmi_wwan_force_int3 = { + .description = "Qualcomm WWAN/QMI device", + .flags = FLAG_WWAN, + .bind = qmi_wwan_bind_shared, + .unbind = qmi_wwan_unbind_shared, + .manage_power = qmi_wwan_manage_power, + .data = BIT(3), /* interface whitelist bitmap */ +}; + static const struct driver_info qmi_wwan_force_int4 = { .description = "Qualcomm WWAN/QMI device", .flags = FLAG_WWAN, @@ -390,16 +376,23 @@ static const struct driver_info qmi_wwan_force_int4 = { static const struct driver_info qmi_wwan_sierra = { .description = "Sierra Wireless wwan/QMI device", .flags = FLAG_WWAN, - .bind = qmi_wwan_bind_gobi, + .bind = qmi_wwan_bind_shared, .unbind = qmi_wwan_unbind_shared, .manage_power = qmi_wwan_manage_power, .data = BIT(8) | BIT(19), /* interface whitelist bitmap */ }; #define HUAWEI_VENDOR_ID 0x12D1 + +/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */ +#define QMI_GOBI1K_DEVICE(vend, prod) \ + USB_DEVICE(vend, prod), \ + .driver_info = (unsigned long)&qmi_wwan_force_int3 + +/* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */ #define QMI_GOBI_DEVICE(vend, prod) \ USB_DEVICE(vend, prod), \ - .driver_info = (unsigned long)&qmi_wwan_gobi + .driver_info = (unsigned long)&qmi_wwan_force_int0 static const struct usb_device_id products[] = { { /* Huawei E392, E398 and possibly others sharing both device id and more... */ @@ -510,20 +503,24 @@ static const struct usb_device_id products[] = { .bInterfaceProtocol = 0xff, .driver_info = (unsigned long)&qmi_wwan_sierra, }, - {QMI_GOBI_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ - {QMI_GOBI_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ - {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ - {QMI_GOBI_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ - {QMI_GOBI_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ - {QMI_GOBI_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ - {QMI_GOBI_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ - {QMI_GOBI_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + + /* Gobi 1000 devices */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ + {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ + {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */ + {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */ + + /* Gobi 2000 and 3000 devices */ {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ -- cgit v1.1 From fb13c47b8e5ce707268bd38cfd082da377eac4b7 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 19 Jun 2012 21:15:51 +0000 Subject: usbnet: clear OPEN flag in failure path Without clearing OPEN flag in failure path, runtime or system resume may submit interrupt/rx URB and start tx queue mistakenly on a interface in DOWN state. Signed-off-by: Ming Lei Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index d4f7256..815493c 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -796,11 +796,13 @@ int usbnet_open (struct net_device *net) if (info->manage_power) { retval = info->manage_power(dev, 1); if (retval < 0) - goto done; + goto done_manage_power_error; usb_autopm_put_interface(dev->intf); } return retval; +done_manage_power_error: + clear_bit(EVENT_DEV_OPEN, &dev->flags); done: usb_autopm_put_interface(dev->intf); done_nopm: -- cgit v1.1 From 5eeb3132eb4c5e9ca92e5247fe4575fe9f8c3efe Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 19 Jun 2012 21:15:52 +0000 Subject: usbnet: decrease suspend count if returning -EBUSY for runtime suspend This patch decreases dev->suspend_count in the -EBUSY failure path of usbnet_suspend. Without the change, the later runtime suspend will do nothing except for increasing dev->suspend_count. Signed-off-by: Ming Lei Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 815493c..1e46f69 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1515,6 +1515,7 @@ int usbnet_suspend (struct usb_interface *intf, pm_message_t message) spin_lock_irq(&dev->txq.lock); /* don't autosuspend while transmitting */ if (dev->txq.qlen && PMSG_IS_AUTO(message)) { + dev->suspend_count--; spin_unlock_irq(&dev->txq.lock); return -EBUSY; } else { -- cgit v1.1 From 65841fd5132c3941cdf5df09e70df3ed28323212 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Tue, 19 Jun 2012 21:15:53 +0000 Subject: usbnet: handle remote wakeup asap If usbnet is resumed by remote wakeup, generally there are some packets comming to be handled, so allocate and submit rx URBs in usbnet_resume to avoid delays introduced by tasklet. Otherwise, usbnet may have been runtime suspended before the usbnet_bh is executed to schedule Rx URBs. Without the patch, usbnet can't recieve any packets from peer in runtime suspend state if runtime PM is enabled and autosuspend_delay is set as zero. Signed-off-by: Ming Lei Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 42 ++++++++++++++++++++++++++---------------- 1 file changed, 26 insertions(+), 16 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 1e46f69..aba769d 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1204,6 +1204,21 @@ deferred: } EXPORT_SYMBOL_GPL(usbnet_start_xmit); +static void rx_alloc_submit(struct usbnet *dev, gfp_t flags) +{ + struct urb *urb; + int i; + + /* don't refill the queue all at once */ + for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) { + urb = usb_alloc_urb(0, flags); + if (urb != NULL) { + if (rx_submit(dev, urb, flags) == -ENOLINK) + return; + } + } +} + /*-------------------------------------------------------------------------*/ // tasklet (work deferred from completions, in_irq) or timer @@ -1243,26 +1258,14 @@ static void usbnet_bh (unsigned long param) !timer_pending (&dev->delay) && !test_bit (EVENT_RX_HALT, &dev->flags)) { int temp = dev->rxq.qlen; - int qlen = RX_QLEN (dev); - - if (temp < qlen) { - struct urb *urb; - int i; - - // don't refill the queue all at once - for (i = 0; i < 10 && dev->rxq.qlen < qlen; i++) { - urb = usb_alloc_urb (0, GFP_ATOMIC); - if (urb != NULL) { - if (rx_submit (dev, urb, GFP_ATOMIC) == - -ENOLINK) - return; - } - } + + if (temp < RX_QLEN(dev)) { + rx_alloc_submit(dev, GFP_ATOMIC); if (temp != dev->rxq.qlen) netif_dbg(dev, link, dev->net, "rxqlen %d --> %d\n", temp, dev->rxq.qlen); - if (dev->rxq.qlen < qlen) + if (dev->rxq.qlen < RX_QLEN(dev)) tasklet_schedule (&dev->bh); } if (dev->txq.qlen < TX_QLEN (dev)) @@ -1572,6 +1575,13 @@ int usbnet_resume (struct usb_interface *intf) spin_unlock_irq(&dev->txq.lock); if (test_bit(EVENT_DEV_OPEN, &dev->flags)) { + /* handle remote wakeup ASAP */ + if (!dev->wait && + netif_device_present(dev->net) && + !timer_pending(&dev->delay) && + !test_bit(EVENT_RX_HALT, &dev->flags)) + rx_alloc_submit(dev, GFP_KERNEL); + if (!(dev->txq.qlen >= TX_QLEN(dev))) netif_tx_wake_all_queues(dev->net); tasklet_schedule (&dev->bh); -- cgit v1.1