From 66466797c7e2406579724e42eb9cfe05d53a882b Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 1 Oct 2009 07:11:46 +0000 Subject: sky2: irqname based on pci address This is based on Michal Schmidt fix for skge. Most network drivers request their IRQ when the interface is activated. sky2 does it in ->probe() instead, because it can work with two-port cards where the two net_devices use the same IRQ. This works fine most of the time, except in some situations when the interface gets renamed. Consider this example: 1. modprobe sky2 The card is detected as eth0 and requests IRQ 17. Directory /proc/irq/17/eth0 is created. 2. There is an udev rule which says this interface should be called eth1, so udev renames eth0 -> eth1. 3. modprobe 8139too The Realtek card is detected as eth0. It will be using IRQ 17 too. 4. ip link set eth0 up Now 8139too requests IRQ 17. The result is: WARNING: at fs/proc/generic.c:590 proc_register ... proc_dir_entry '17/eth0' already registered The fix is for sky2 to name the irq based on the pci device, as is done by some other devices DRM, infiniband, ... ie. sky2@pci:0000:00:00 Signed-off-by: Stephen Hemminger Reviewed-by: Michal Schmidt Signed-off-by: David S. Miller --- drivers/net/sky2.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net/sky2.h') diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index e0f23a1..ed54129 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -2085,6 +2085,8 @@ struct sky2_hw { struct timer_list watchdog_timer; struct work_struct restart_work; wait_queue_head_t msi_wait; + + char irq_name[0]; }; static inline int sky2_is_copper(const struct sky2_hw *hw) -- cgit v1.1