From d9663c8c21491267c064cdb028b767404a39d7c7 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:49:42 -0500 Subject: amd-xgbe-phy: Use phydev advertising field vs supported With ethtool being able to control what is advertised, the advertising field is what should be used for priming the auto-negotiation registers and for various other checks, instead of the supported field. Also, move the initial setting of the supported and advertising fields into the probe function so that they are not reset each time the device is brought up, thus allowing the user to set as desired before bringing the device up. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/phy/amd-xgbe-phy.c | 77 +++++++++++++++++++++--------------------- 1 file changed, 38 insertions(+), 39 deletions(-) (limited to 'drivers/net/phy/amd-xgbe-phy.c') diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index 32efbd4..acb4449 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -932,8 +932,8 @@ static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev) if (amd_xgbe_phy_in_kr_mode(phydev)) { priv->kr_state = AMD_XGBE_RX_ERROR; - if (!(phydev->supported & SUPPORTED_1000baseKX_Full) && - !(phydev->supported & SUPPORTED_2500baseX_Full)) + if (!(phydev->advertising & SUPPORTED_1000baseKX_Full) && + !(phydev->advertising & SUPPORTED_2500baseX_Full)) return AMD_XGBE_AN_NO_LINK; if (priv->kx_state != AMD_XGBE_RX_BPA) @@ -941,7 +941,7 @@ static enum amd_xgbe_phy_an amd_xgbe_an_incompat_link(struct phy_device *phydev) } else { priv->kx_state = AMD_XGBE_RX_ERROR; - if (!(phydev->supported & SUPPORTED_10000baseKR_Full)) + if (!(phydev->advertising & SUPPORTED_10000baseKR_Full)) return AMD_XGBE_AN_NO_LINK; if (priv->kr_state != AMD_XGBE_RX_BPA) @@ -1101,7 +1101,7 @@ static int amd_xgbe_an_init(struct phy_device *phydev) if (ret < 0) return ret; - if (phydev->supported & SUPPORTED_10000baseR_FEC) + if (phydev->advertising & SUPPORTED_10000baseR_FEC) ret |= 0xc000; else ret &= ~0xc000; @@ -1113,13 +1113,13 @@ static int amd_xgbe_an_init(struct phy_device *phydev) if (ret < 0) return ret; - if (phydev->supported & SUPPORTED_10000baseKR_Full) + if (phydev->advertising & SUPPORTED_10000baseKR_Full) ret |= 0x80; else ret &= ~0x80; - if ((phydev->supported & SUPPORTED_1000baseKX_Full) || - (phydev->supported & SUPPORTED_2500baseX_Full)) + if ((phydev->advertising & SUPPORTED_1000baseKX_Full) || + (phydev->advertising & SUPPORTED_2500baseX_Full)) ret |= 0x20; else ret &= ~0x20; @@ -1131,12 +1131,12 @@ static int amd_xgbe_an_init(struct phy_device *phydev) if (ret < 0) return ret; - if (phydev->supported & SUPPORTED_Pause) + if (phydev->advertising & SUPPORTED_Pause) ret |= 0x400; else ret &= ~0x400; - if (phydev->supported & SUPPORTED_Asym_Pause) + if (phydev->advertising & SUPPORTED_Asym_Pause) ret |= 0x800; else ret &= ~0x800; @@ -1212,38 +1212,14 @@ static int amd_xgbe_phy_config_init(struct phy_device *phydev) priv->an_irq_allocated = 1; } - ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_ABILITY); - if (ret < 0) - return ret; - priv->fec_ability = ret & XGBE_PHY_FEC_MASK; - - /* Initialize supported features */ - phydev->supported = SUPPORTED_Autoneg; - phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; - phydev->supported |= SUPPORTED_Backplane; - phydev->supported |= SUPPORTED_10000baseKR_Full; - switch (priv->speed_set) { - case AMD_XGBE_PHY_SPEEDSET_1000_10000: - phydev->supported |= SUPPORTED_1000baseKX_Full; - break; - case AMD_XGBE_PHY_SPEEDSET_2500_10000: - phydev->supported |= SUPPORTED_2500baseX_Full; - break; - } - - if (priv->fec_ability & XGBE_PHY_FEC_ENABLE) - phydev->supported |= SUPPORTED_10000baseR_FEC; - - phydev->advertising = phydev->supported; - /* Set initial mode - call the mode setting routines * directly to insure we are properly configured */ - if (phydev->supported & SUPPORTED_10000baseKR_Full) + if (phydev->advertising & SUPPORTED_10000baseKR_Full) ret = amd_xgbe_phy_xgmii_mode(phydev); - else if (phydev->supported & SUPPORTED_1000baseKX_Full) + else if (phydev->advertising & SUPPORTED_1000baseKX_Full) ret = amd_xgbe_phy_gmii_mode(phydev); - else if (phydev->supported & SUPPORTED_2500baseX_Full) + else if (phydev->advertising & SUPPORTED_2500baseX_Full) ret = amd_xgbe_phy_gmii_2500_mode(phydev); else ret = -EINVAL; @@ -1315,10 +1291,10 @@ static int __amd_xgbe_phy_config_aneg(struct phy_device *phydev) disable_irq(priv->an_irq); /* Start auto-negotiation in a supported mode */ - if (phydev->supported & SUPPORTED_10000baseKR_Full) + if (phydev->advertising & SUPPORTED_10000baseKR_Full) ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KR); - else if ((phydev->supported & SUPPORTED_1000baseKX_Full) || - (phydev->supported & SUPPORTED_2500baseX_Full)) + else if ((phydev->advertising & SUPPORTED_1000baseKX_Full) || + (phydev->advertising & SUPPORTED_2500baseX_Full)) ret = amd_xgbe_phy_set_mode(phydev, AMD_XGBE_MODE_KX); else ret = -EINVAL; @@ -1746,6 +1722,29 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev) sizeof(priv->serdes_dfe_tap_ena)); } + /* Initialize supported features */ + phydev->supported = SUPPORTED_Autoneg; + phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; + phydev->supported |= SUPPORTED_Backplane; + phydev->supported |= SUPPORTED_10000baseKR_Full; + switch (priv->speed_set) { + case AMD_XGBE_PHY_SPEEDSET_1000_10000: + phydev->supported |= SUPPORTED_1000baseKX_Full; + break; + case AMD_XGBE_PHY_SPEEDSET_2500_10000: + phydev->supported |= SUPPORTED_2500baseX_Full; + break; + } + + ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_FEC_ABILITY); + if (ret < 0) + return ret; + priv->fec_ability = ret & XGBE_PHY_FEC_MASK; + if (priv->fec_ability & XGBE_PHY_FEC_ENABLE) + phydev->supported |= SUPPORTED_10000baseR_FEC; + + phydev->advertising = phydev->supported; + phydev->priv = priv; if (!priv->adev || acpi_disabled) -- cgit v1.1 From 65f57cb152ea0ad464793927e79074eb6da0064a Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:49:53 -0500 Subject: amd-xgbe-phy: Use the phy_driver flags field Remove the setting of the transceiver type when retrieving the device settings using ethtool and instead set the transceiver type in the phy_driver structure flags field. Change the transceiver type to be internal, also. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/phy/amd-xgbe-phy.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/phy/amd-xgbe-phy.c') diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index acb4449..4b95caf 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -1816,6 +1816,7 @@ static struct phy_driver amd_xgbe_phy_driver[] = { .phy_id_mask = XGBE_PHY_MASK, .name = "AMD XGBE PHY", .features = 0, + .flags = PHY_IS_INTERNAL, .probe = amd_xgbe_phy_probe, .remove = amd_xgbe_phy_remove, .soft_reset = amd_xgbe_phy_soft_reset, -- cgit v1.1 From 9ae5eecdba7297725b280e81e905f48f85f9ffe7 Mon Sep 17 00:00:00 2001 From: "Lendacky, Thomas" Date: Fri, 20 Mar 2015 11:50:04 -0500 Subject: amd-xgbe-phy: Provide support for auto-negotiation timeout Currently, there is no interrupt code that indicates auto-negotiation has timed out. If the auto-negotiation has timed out then the start of a new auto-negotiation will begin again with a new base page being received. The state machine could be in a state that is not expecting this interrupt code which results in an error during auto-negotiation. Update the code to timestamp when the auto-negotiation starts. Should another page received interrupt code occur before auto-negotiation has completed but after the auto-negotiation timeout, then reset the state machine to allow the auto-negotiation to continue. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller --- drivers/net/phy/amd-xgbe-phy.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/net/phy/amd-xgbe-phy.c') diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index 4b95caf..fb276f6 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -78,6 +78,7 @@ #include #include #include +#include MODULE_AUTHOR("Tom Lendacky "); MODULE_LICENSE("Dual BSD/GPL"); @@ -100,6 +101,8 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); #define XGBE_PHY_SPEED_2500 1 #define XGBE_PHY_SPEED_10000 2 +#define XGBE_AN_MS_TIMEOUT 500 + #define XGBE_AN_INT_CMPLT 0x01 #define XGBE_AN_INC_LINK 0x02 #define XGBE_AN_PG_RCV 0x04 @@ -434,6 +437,7 @@ struct amd_xgbe_phy_priv { unsigned int an_supported; unsigned int parallel_detect; unsigned int fec_ability; + unsigned long an_start; unsigned int lpm_ctrl; /* CTRL1 for resume */ }; @@ -902,8 +906,23 @@ static enum amd_xgbe_phy_an amd_xgbe_an_page_received(struct phy_device *phydev) { struct amd_xgbe_phy_priv *priv = phydev->priv; enum amd_xgbe_phy_rx *state; + unsigned long an_timeout; int ret; + if (!priv->an_start) { + priv->an_start = jiffies; + } else { + an_timeout = priv->an_start + + msecs_to_jiffies(XGBE_AN_MS_TIMEOUT); + if (time_after(jiffies, an_timeout)) { + /* Auto-negotiation timed out, reset state */ + priv->kr_state = AMD_XGBE_RX_BPA; + priv->kx_state = AMD_XGBE_RX_BPA; + + priv->an_start = jiffies; + } + } + state = amd_xgbe_phy_in_kr_mode(phydev) ? &priv->kr_state : &priv->kx_state; @@ -1078,6 +1097,7 @@ again: priv->an_state = AMD_XGBE_AN_READY; priv->kr_state = AMD_XGBE_RX_BPA; priv->kx_state = AMD_XGBE_RX_BPA; + priv->an_start = 0; } if (cur_state != priv->an_state) -- cgit v1.1