From d4e0fe01a38a073568aee541a0247fe734095979 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 7 Apr 2009 14:37:34 +0000 Subject: igbvf: add new driver to support 82576 virtual functions This adds an igbvf driver to handle virtual functions provided by the igb driver when SR-IOV has been enabled. A virtual function is a lightweight pci-e function that supports a single queue and shares resources with the 82576 physical function contained within the igb driver. To spawn virtual functions from the igb driver all that is needed is to enable CONFIG_PCI_IOV and have an 82576 Ethernet adapter on a system that supports SR-IOV in the BIOS. The virtual functions will appear after the interface is loaded. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igbvf/vf.c | 398 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 398 insertions(+) create mode 100644 drivers/net/igbvf/vf.c (limited to 'drivers/net/igbvf/vf.c') diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c new file mode 100644 index 0000000..aa246c9 --- /dev/null +++ b/drivers/net/igbvf/vf.c @@ -0,0 +1,398 @@ +/******************************************************************************* + + Intel(R) 82576 Virtual Function Linux driver + Copyright(c) 2009 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +#include "vf.h" + +static s32 e1000_check_for_link_vf(struct e1000_hw *hw); +static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +static s32 e1000_init_hw_vf(struct e1000_hw *hw); +static s32 e1000_reset_hw_vf(struct e1000_hw *hw); + +static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *, + u32, u32, u32); +static void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32); +static s32 e1000_read_mac_addr_vf(struct e1000_hw *); +static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool); + +/** + * e1000_init_mac_params_vf - Inits MAC params + * @hw: pointer to the HW structure + **/ +s32 e1000_init_mac_params_vf(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + /* VF's have no MTA Registers - PF feature only */ + mac->mta_reg_count = 128; + /* VF's have no access to RAR entries */ + mac->rar_entry_count = 1; + + /* Function pointers */ + /* reset */ + mac->ops.reset_hw = e1000_reset_hw_vf; + /* hw initialization */ + mac->ops.init_hw = e1000_init_hw_vf; + /* check for link */ + mac->ops.check_for_link = e1000_check_for_link_vf; + /* link info */ + mac->ops.get_link_up_info = e1000_get_link_up_info_vf; + /* multicast address update */ + mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_vf; + /* set mac address */ + mac->ops.rar_set = e1000_rar_set_vf; + /* read mac address */ + mac->ops.read_mac_addr = e1000_read_mac_addr_vf; + /* set vlan filter table array */ + mac->ops.set_vfta = e1000_set_vfta_vf; + + return E1000_SUCCESS; +} + +/** + * e1000_init_function_pointers_vf - Inits function pointers + * @hw: pointer to the HW structure + **/ +void e1000_init_function_pointers_vf(struct e1000_hw *hw) +{ + hw->mac.ops.init_params = e1000_init_mac_params_vf; + hw->mbx.ops.init_params = e1000_init_mbx_params_vf; +} + +/** + * e1000_get_link_up_info_vf - Gets link info. + * @hw: pointer to the HW structure + * @speed: pointer to 16 bit value to store link speed. + * @duplex: pointer to 16 bit value to store duplex. + * + * Since we cannot read the PHY and get accurate link info, we must rely upon + * the status register's data which is often stale and inaccurate. + **/ +static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 status; + + status = er32(STATUS); + if (status & E1000_STATUS_SPEED_1000) + *speed = SPEED_1000; + else if (status & E1000_STATUS_SPEED_100) + *speed = SPEED_100; + else + *speed = SPEED_10; + + if (status & E1000_STATUS_FD) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return E1000_SUCCESS; +} + +/** + * e1000_reset_hw_vf - Resets the HW + * @hw: pointer to the HW structure + * + * VF's provide a function level reset. This is done using bit 26 of ctrl_reg. + * This is all the reset we can perform on a VF. + **/ +static s32 e1000_reset_hw_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 timeout = E1000_VF_INIT_TIMEOUT; + u32 ret_val = -E1000_ERR_MAC_INIT; + u32 msgbuf[3]; + u8 *addr = (u8 *)(&msgbuf[1]); + u32 ctrl; + + /* assert vf queue/interrupt reset */ + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_RST); + + /* we cannot initialize while the RSTI / RSTD bits are asserted */ + while (!mbx->ops.check_for_rst(hw) && timeout) { + timeout--; + udelay(5); + } + + if (timeout) { + /* mailbox timeout can now become active */ + mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT; + + /* notify pf of vf reset completion */ + msgbuf[0] = E1000_VF_RESET; + mbx->ops.write_posted(hw, msgbuf, 1); + + msleep(10); + + /* set our "perm_addr" based on info provided by PF */ + ret_val = mbx->ops.read_posted(hw, msgbuf, 3); + if (!ret_val) { + if (msgbuf[0] == (E1000_VF_RESET | E1000_VT_MSGTYPE_ACK)) + memcpy(hw->mac.perm_addr, addr, 6); + else + ret_val = -E1000_ERR_MAC_INIT; + } + } + + return ret_val; +} + +/** + * e1000_init_hw_vf - Inits the HW + * @hw: pointer to the HW structure + * + * Not much to do here except clear the PF Reset indication if there is one. + **/ +static s32 e1000_init_hw_vf(struct e1000_hw *hw) +{ + /* attempt to set and restore our mac address */ + e1000_rar_set_vf(hw, hw->mac.addr, 0); + + return E1000_SUCCESS; +} + +/** + * e1000_hash_mc_addr_vf - Generate a multicast hash value + * @hw: pointer to the HW structure + * @mc_addr: pointer to a multicast address + * + * Generates a multicast address hash value which is used to determine + * the multicast filter table array address and new table value. See + * e1000_mta_set_generic() + **/ +static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr) +{ + u32 hash_value, hash_mask; + u8 bit_shift = 0; + + /* Register count multiplied by bits per register */ + hash_mask = (hw->mac.mta_reg_count * 32) - 1; + + /* + * The bit_shift is the number of left-shifts + * where 0xFF would still fall within the hash mask. + */ + while (hash_mask >> bit_shift != 0xFF) + bit_shift++; + + hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | + (((u16) mc_addr[5]) << bit_shift))); + + return hash_value; +} + +/** + * e1000_update_mc_addr_list_vf - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * @rar_used_count: the first RAR register free to program + * @rar_count: total number of supported Receive Address Registers + * + * Updates the Receive Address Registers and Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + * The parameter rar_count will usually be hw->mac.rar_entry_count + * unless there are workarounds that change this. + **/ +void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count, + u32 rar_used_count, u32 rar_count) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[E1000_VFMAILBOX_SIZE]; + u16 *hash_list = (u16 *)&msgbuf[1]; + u32 hash_value; + u32 cnt, i; + + /* Each entry in the list uses 1 16 bit word. We have 30 + * 16 bit words available in our HW msg buffer (minus 1 for the + * msg type). That's 30 hash values if we pack 'em right. If + * there are more than 30 MC addresses to add then punt the + * extras for now and then add code to handle more than 30 later. + * It would be unusual for a server to request that many multi-cast + * addresses except for in large enterprise network environments. + */ + + cnt = (mc_addr_count > 30) ? 30 : mc_addr_count; + msgbuf[0] = E1000_VF_SET_MULTICAST; + msgbuf[0] |= cnt << E1000_VT_MSGINFO_SHIFT; + + for (i = 0; i < cnt; i++) { + hash_value = e1000_hash_mc_addr_vf(hw, mc_addr_list); + hash_list[i] = hash_value & 0x0FFFF; + mc_addr_list += ETH_ADDR_LEN; + } + + mbx->ops.write_posted(hw, msgbuf, E1000_VFMAILBOX_SIZE); +} + +/** + * e1000_set_vfta_vf - Set/Unset vlan filter table address + * @hw: pointer to the HW structure + * @vid: determines the vfta register and bit to set/unset + * @set: if true then set bit, else clear bit + **/ +static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[2]; + s32 err; + + msgbuf[0] = E1000_VF_SET_VLAN; + msgbuf[1] = vid; + /* Setting the 8 bit field MSG INFO to true indicates "add" */ + if (set) + msgbuf[0] |= 1 << E1000_VT_MSGINFO_SHIFT; + + mbx->ops.write_posted(hw, msgbuf, 2); + + err = mbx->ops.read_posted(hw, msgbuf, 2); + + /* if nacked the vlan was rejected */ + if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK))) + err = -E1000_ERR_MAC_INIT; + + return err; +} + +/** e1000_rlpml_set_vf - Set the maximum receive packet length + * @hw: pointer to the HW structure + * @max_size: value to assign to max frame size + **/ +void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[2]; + + msgbuf[0] = E1000_VF_SET_LPE; + msgbuf[1] = max_size; + + mbx->ops.write_posted(hw, msgbuf, 2); +} + +/** + * e1000_rar_set_vf - set device MAC address + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index receive address array register + **/ +static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[3]; + u8 *msg_addr = (u8 *)(&msgbuf[1]); + s32 ret_val; + + memset(msgbuf, 0, 12); + msgbuf[0] = E1000_VF_SET_MAC_ADDR; + memcpy(msg_addr, addr, 6); + ret_val = mbx->ops.write_posted(hw, msgbuf, 3); + + if (!ret_val) + ret_val = mbx->ops.read_posted(hw, msgbuf, 3); + + /* if nacked the address was rejected, use "perm_addr" */ + if (!ret_val && + (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK))) + e1000_read_mac_addr_vf(hw); +} + +/** + * e1000_read_mac_addr_vf - Read device MAC address + * @hw: pointer to the HW structure + **/ +static s32 e1000_read_mac_addr_vf(struct e1000_hw *hw) +{ + int i; + + for (i = 0; i < ETH_ADDR_LEN; i++) + hw->mac.addr[i] = hw->mac.perm_addr[i]; + + return E1000_SUCCESS; +} + +/** + * e1000_check_for_link_vf - Check for link for a virtual interface + * @hw: pointer to the HW structure + * + * Checks to see if the underlying PF is still talking to the VF and + * if it is then it reports the link state to the hardware, otherwise + * it reports link down and returns an error. + **/ +static s32 e1000_check_for_link_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + u32 in_msg = 0; + + /* + * We only want to run this if there has been a rst asserted. + * in this case that could mean a link change, device reset, + * or a virtual function reset + */ + + /* If we were hit with a reset drop the link */ + if (!mbx->ops.check_for_rst(hw)) + mac->get_link_status = true; + + if (!mac->get_link_status) + goto out; + + /* if link status is down no point in checking to see if pf is up */ + if (!(er32(STATUS) & E1000_STATUS_LU)) + goto out; + + /* if the read failed it could just be a mailbox collision, best wait + * until we are called again and don't report an error */ + if (mbx->ops.read(hw, &in_msg, 1)) + goto out; + + /* if incoming message isn't clear to send we are waiting on response */ + if (!(in_msg & E1000_VT_MSGTYPE_CTS)) { + /* message is not CTS and is NACK we must have lost CTS status */ + if (in_msg & E1000_VT_MSGTYPE_NACK) + ret_val = -E1000_ERR_MAC_INIT; + goto out; + } + + /* the pf is talking, if we timed out in the past we reinit */ + if (!mbx->timeout) { + ret_val = -E1000_ERR_MAC_INIT; + goto out; + } + + /* if we passed all the tests above then the link is up and we no + * longer need to check for link */ + mac->get_link_status = false; + +out: + return ret_val; +} + -- cgit v1.1 From 2d165771062cae75de26fe7bc7cb2d937ff6f1b4 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Thu, 9 Apr 2009 22:49:20 +0000 Subject: igbvf: fix unused external references The igbvbf driver exposed several unused extrnal references due to the fact that code was copied from igb and then some functionality was removed. This changes that so that unused functions are either removed or made static. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igbvf/vf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net/igbvf/vf.c') diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c index aa246c9..2a4faf9 100644 --- a/drivers/net/igbvf/vf.c +++ b/drivers/net/igbvf/vf.c @@ -44,7 +44,7 @@ static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool); * e1000_init_mac_params_vf - Inits MAC params * @hw: pointer to the HW structure **/ -s32 e1000_init_mac_params_vf(struct e1000_hw *hw) +static s32 e1000_init_mac_params_vf(struct e1000_hw *hw) { struct e1000_mac_info *mac = &hw->mac; -- cgit v1.1