From 15b1c0e822f578306332d4f4c449250db5c5dceb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 7 Dec 2006 15:47:08 -0800 Subject: [AX.25]: Fix default address and broadcast address initialization. Only the callsign but not the SSID part of an AX.25 address is ASCII based but Linux by initializes the SSID which should be just a 4-bit number from ASCII anyway. Fix that and convert the code to use a shared constant for both default addresses. While at it, use the same style for null_ax25_address also. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller --- drivers/net/hamradio/hdlcdrv.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'drivers/net/hamradio/hdlcdrv.c') diff --git a/drivers/net/hamradio/hdlcdrv.c b/drivers/net/hamradio/hdlcdrv.c index dacc768..452873e 100644 --- a/drivers/net/hamradio/hdlcdrv.c +++ b/drivers/net/hamradio/hdlcdrv.c @@ -63,18 +63,6 @@ /* --------------------------------------------------------------------- */ -/* - * The name of the card. Is used for messages and in the requests for - * io regions, irqs and dma channels - */ - -static char ax25_bcast[AX25_ADDR_LEN] = -{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1}; -static char ax25_nocall[AX25_ADDR_LEN] = -{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1}; - -/* --------------------------------------------------------------------- */ - #define KISS_VERBOSE /* --------------------------------------------------------------------- */ @@ -709,8 +697,8 @@ static void hdlcdrv_setup(struct net_device *dev) dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN; dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */ dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */ - memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN); - memcpy(dev->dev_addr, ax25_nocall, AX25_ADDR_LEN); + memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN); + memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN); dev->tx_queue_len = 16; } -- cgit v1.1