From 67da097e1295071da700862e7faa8a294b182b42 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Fri, 25 Jan 2013 06:19:20 +0000 Subject: ixgbe: fix Tx timeouts with BQL This patch makes sure that TXDCTL.WTHRESH is set to 1 when BQL is enabled and EITR is set to more than 100k interrupts per second to avoid Tx timeouts. Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 33 +++++++++++++++++++----- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 8 +++++- 2 files changed, 34 insertions(+), 7 deletions(-) (limited to 'drivers/net/ethernet') diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index e6cebdc..f4d2e9e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2113,13 +2113,17 @@ static int ixgbe_set_coalesce(struct net_device *netdev, struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_q_vector *q_vector; int i; - u16 tx_itr_param, rx_itr_param; + u16 tx_itr_param, rx_itr_param, tx_itr_prev; bool need_reset = false; - /* don't accept tx specific changes if we've got mixed RxTx vectors */ - if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count - && ec->tx_coalesce_usecs) - return -EINVAL; + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) { + /* reject Tx specific changes in case of mixed RxTx vectors */ + if (ec->tx_coalesce_usecs) + return -EINVAL; + tx_itr_prev = adapter->rx_itr_setting; + } else { + tx_itr_prev = adapter->tx_itr_setting; + } if ((ec->rx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)) || (ec->tx_coalesce_usecs > (IXGBE_MAX_EITR >> 2))) @@ -2145,8 +2149,25 @@ static int ixgbe_set_coalesce(struct net_device *netdev, else tx_itr_param = adapter->tx_itr_setting; + /* mixed Rx/Tx */ + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) + adapter->tx_itr_setting = adapter->rx_itr_setting; + +#if IS_ENABLED(CONFIG_BQL) + /* detect ITR changes that require update of TXDCTL.WTHRESH */ + if ((adapter->tx_itr_setting > 1) && + (adapter->tx_itr_setting < IXGBE_100K_ITR)) { + if ((tx_itr_prev == 1) || + (tx_itr_prev > IXGBE_100K_ITR)) + need_reset = true; + } else { + if ((tx_itr_prev > 1) && + (tx_itr_prev < IXGBE_100K_ITR)) + need_reset = true; + } +#endif /* check the old value and enable RSC if necessary */ - need_reset = ixgbe_update_rsc(adapter); + need_reset |= ixgbe_update_rsc(adapter); for (i = 0; i < adapter->num_q_vectors; i++) { q_vector = adapter->q_vector[i]; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index b0b72fc..68478d6 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2786,13 +2786,19 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, /* * set WTHRESH to encourage burst writeback, it should not be set - * higher than 1 when ITR is 0 as it could cause false TX hangs + * higher than 1 when: + * - ITR is 0 as it could cause false TX hangs + * - ITR is set to > 100k int/sec and BQL is enabled * * In order to avoid issues WTHRESH + PTHRESH should always be equal * to or less than the number of on chip descriptors, which is * currently 40. */ +#if IS_ENABLED(CONFIG_BQL) + if (!ring->q_vector || (ring->q_vector->itr < IXGBE_100K_ITR)) +#else if (!ring->q_vector || (ring->q_vector->itr < 8)) +#endif txdctl |= (1 << 16); /* WTHRESH = 1 */ else txdctl |= (8 << 16); /* WTHRESH = 8 */ -- cgit v1.1