From 105c320f6ac37af30252577d419e47b39edb5843 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 19 Jun 2012 11:21:43 +0300 Subject: mlx4_core: Allow guests to have IB ports Modify mlx4_dev_cap to allow IB support when SR-IOV is active. Modify mlx4_slave_cap to set the "rdma-supported" bit in its flags area, and pass that to the guests (this is done in QUERY_FUNC_CAP and its wrapper). However, we don't activate IB support quite yet -- we leave the error return at the start of mlx4_ib_add in the mlx4_ib driver. In addition, set "protected fmr supported" bit to zero in the QUERY_FUNC_CAP wrapper. Finally, in the QUERY_FUNC_CAP wrapper, we needed to add code which checks for the port type (IB or Ethernet). Previously, this was not an issue, since only Ethernet ports were supported. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/net/ethernet/mellanox/mlx4/fw.c | 78 ++++++++++++++++++++----------- drivers/net/ethernet/mellanox/mlx4/main.c | 26 ++++------- 2 files changed, 59 insertions(+), 45 deletions(-) (limited to 'drivers/net/ethernet/mellanox') diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c index ee9d6b0..5549f6b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/fw.c +++ b/drivers/net/ethernet/mellanox/mlx4/fw.c @@ -174,6 +174,7 @@ int mlx4_QUERY_FUNC_CAP_wrapper(struct mlx4_dev *dev, int slave, #define QUERY_FUNC_CAP_FLAGS_OFFSET 0x0 #define QUERY_FUNC_CAP_NUM_PORTS_OFFSET 0x1 #define QUERY_FUNC_CAP_PF_BHVR_OFFSET 0x4 +#define QUERY_FUNC_CAP_FMR_OFFSET 0x8 #define QUERY_FUNC_CAP_QP_QUOTA_OFFSET 0x10 #define QUERY_FUNC_CAP_CQ_QUOTA_OFFSET 0x14 #define QUERY_FUNC_CAP_SRQ_QUOTA_OFFSET 0x18 @@ -183,25 +184,44 @@ int mlx4_QUERY_FUNC_CAP_wrapper(struct mlx4_dev *dev, int slave, #define QUERY_FUNC_CAP_MAX_EQ_OFFSET 0x2c #define QUERY_FUNC_CAP_RESERVED_EQ_OFFSET 0X30 +#define QUERY_FUNC_CAP_FMR_FLAG 0x80 +#define QUERY_FUNC_CAP_FLAG_RDMA 0x40 +#define QUERY_FUNC_CAP_FLAG_ETH 0x80 + +/* when opcode modifier = 1 */ #define QUERY_FUNC_CAP_PHYS_PORT_OFFSET 0x3 +#define QUERY_FUNC_CAP_RDMA_PROPS_OFFSET 0x8 #define QUERY_FUNC_CAP_ETH_PROPS_OFFSET 0xc +#define QUERY_FUNC_CAP_ETH_PROPS_FORCE_MAC 0x40 +#define QUERY_FUNC_CAP_ETH_PROPS_FORCE_VLAN 0x80 + +#define QUERY_FUNC_CAP_RDMA_PROPS_FORCE_PHY_WQE_GID 0x80 + if (vhcr->op_modifier == 1) { field = vhcr->in_modifier; MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_PHYS_PORT_OFFSET); - field = 0; /* ensure fvl bit is not set */ + field = 0; + /* ensure force vlan and force mac bits are not set */ MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_ETH_PROPS_OFFSET); + /* ensure that phy_wqe_gid bit is not set */ + MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_RDMA_PROPS_OFFSET); + } else if (vhcr->op_modifier == 0) { - field = 1 << 7; /* enable only ethernet interface */ + /* enable rdma and ethernet interfaces */ + field = (QUERY_FUNC_CAP_FLAG_ETH | QUERY_FUNC_CAP_FLAG_RDMA); MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_FLAGS_OFFSET); field = dev->caps.num_ports; MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_NUM_PORTS_OFFSET); - size = 0; /* no PF behavious is set for now */ + size = 0; /* no PF behaviour is set for now */ MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_PF_BHVR_OFFSET); + field = 0; /* protected FMR support not available as yet */ + MLX4_PUT(outbox->buf, field, QUERY_FUNC_CAP_FMR_OFFSET); + size = dev->caps.num_qps; MLX4_PUT(outbox->buf, size, QUERY_FUNC_CAP_QP_QUOTA_OFFSET); @@ -254,11 +274,12 @@ int mlx4_QUERY_FUNC_CAP(struct mlx4_dev *dev, struct mlx4_func_cap *func_cap) outbox = mailbox->buf; MLX4_GET(field, outbox, QUERY_FUNC_CAP_FLAGS_OFFSET); - if (!(field & (1 << 7))) { - mlx4_err(dev, "The host doesn't support eth interface\n"); + if (!(field & (QUERY_FUNC_CAP_FLAG_ETH | QUERY_FUNC_CAP_FLAG_RDMA))) { + mlx4_err(dev, "The host supports neither eth nor rdma interfaces\n"); err = -EPROTONOSUPPORT; goto out; } + func_cap->flags = field; MLX4_GET(field, outbox, QUERY_FUNC_CAP_NUM_PORTS_OFFSET); func_cap->num_ports = field; @@ -297,17 +318,27 @@ int mlx4_QUERY_FUNC_CAP(struct mlx4_dev *dev, struct mlx4_func_cap *func_cap) if (err) goto out; - MLX4_GET(field, outbox, QUERY_FUNC_CAP_ETH_PROPS_OFFSET); - if (field & (1 << 7)) { - mlx4_err(dev, "VLAN is enforced on this port\n"); - err = -EPROTONOSUPPORT; - goto out; - } + if (dev->caps.port_type[i] == MLX4_PORT_TYPE_ETH) { + MLX4_GET(field, outbox, QUERY_FUNC_CAP_ETH_PROPS_OFFSET); + if (field & QUERY_FUNC_CAP_ETH_PROPS_FORCE_VLAN) { + mlx4_err(dev, "VLAN is enforced on this port\n"); + err = -EPROTONOSUPPORT; + goto out; + } - if (field & (1 << 6)) { - mlx4_err(dev, "Force mac is enabled on this port\n"); - err = -EPROTONOSUPPORT; - goto out; + if (field & QUERY_FUNC_CAP_ETH_PROPS_FORCE_MAC) { + mlx4_err(dev, "Force mac is enabled on this port\n"); + err = -EPROTONOSUPPORT; + goto out; + } + } else if (dev->caps.port_type[i] == MLX4_PORT_TYPE_IB) { + MLX4_GET(field, outbox, QUERY_FUNC_CAP_RDMA_PROPS_OFFSET); + if (field & QUERY_FUNC_CAP_RDMA_PROPS_FORCE_PHY_WQE_GID) { + mlx4_err(dev, "phy_wqe_gid is " + "enforced on this ib port\n"); + err = -EPROTONOSUPPORT; + goto out; + } } MLX4_GET(field, outbox, QUERY_FUNC_CAP_PHYS_PORT_OFFSET); @@ -701,12 +732,7 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave, u8 port_type; int err; -#define MLX4_PORT_SUPPORT_IB (1 << 0) -#define MLX4_PORT_SUGGEST_TYPE (1 << 3) -#define MLX4_PORT_DEFAULT_SENSE (1 << 4) -#define MLX4_VF_PORT_ETH_ONLY_MASK (0xff & ~MLX4_PORT_SUPPORT_IB & \ - ~MLX4_PORT_SUGGEST_TYPE & \ - ~MLX4_PORT_DEFAULT_SENSE) +#define MLX4_VF_PORT_NO_LINK_SENSE_MASK 0xE0 err = mlx4_cmd_box(dev, 0, outbox->dma, vhcr->in_modifier, 0, MLX4_CMD_QUERY_PORT, MLX4_CMD_TIME_CLASS_B, @@ -722,12 +748,10 @@ int mlx4_QUERY_PORT_wrapper(struct mlx4_dev *dev, int slave, MLX4_GET(port_type, outbox->buf, QUERY_PORT_SUPPORTED_TYPE_OFFSET); - /* Allow only Eth port, no link sensing allowed */ - port_type &= MLX4_VF_PORT_ETH_ONLY_MASK; - - /* check eth is enabled for this port */ - if (!(port_type & 2)) - mlx4_dbg(dev, "QUERY PORT: eth not supported by host"); + /* No link sensing allowed */ + port_type &= MLX4_VF_PORT_NO_LINK_SENSE_MASK; + /* set port type to currently operating port type */ + port_type |= (dev->caps.port_type[vhcr->in_modifier] & 0x3); MLX4_PUT(outbox->buf, port_type, QUERY_PORT_SUPPORTED_TYPE_OFFSET); diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 81154a1..58544b7 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -288,29 +288,19 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) /* if only ETH is supported - assign ETH */ if (dev->caps.supported_type[i] == MLX4_PORT_TYPE_ETH) dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH; - /* if only IB is supported, - * assign IB only if SRIOV is off*/ + /* if only IB is supported, assign IB */ else if (dev->caps.supported_type[i] == - MLX4_PORT_TYPE_IB) { - if (dev->flags & MLX4_FLAG_SRIOV) - dev->caps.port_type[i] = - MLX4_PORT_TYPE_NONE; - else - dev->caps.port_type[i] = - MLX4_PORT_TYPE_IB; - /* if IB and ETH are supported, - * first of all check if SRIOV is on */ - } else if (dev->flags & MLX4_FLAG_SRIOV) - dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH; + MLX4_PORT_TYPE_IB) + dev->caps.port_type[i] = MLX4_PORT_TYPE_IB; else { - /* In non-SRIOV mode, we set the port type - * according to user selection of port type, - * if usere selected none, take the FW hint */ - if (port_type_array[i-1] == MLX4_PORT_TYPE_NONE) + /* if IB and ETH are supported, we set the port + * type according to user selection of port type; + * if user selected none, take the FW hint */ + if (port_type_array[i - 1] == MLX4_PORT_TYPE_NONE) dev->caps.port_type[i] = dev->caps.suggested_type[i] ? MLX4_PORT_TYPE_ETH : MLX4_PORT_TYPE_IB; else - dev->caps.port_type[i] = port_type_array[i-1]; + dev->caps.port_type[i] = port_type_array[i - 1]; } } /* -- cgit v1.1