From 9a0384c020b055a555500906be8ac314c92f3998 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 22 Mar 2016 22:27:38 +0300 Subject: macb: fix PHY reset The driver calls gpiod_set_value() with GPIOD_OUT_* instead of 0 and 1, as a result the PHY isn't really put back into reset state in macb_remove(). Moreover, the driver assumes that something else has set the GPIO direction to output, so if it has not, the PHY may not be taken out of reset in macb_probe() either... Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/cadence') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 3ce6095..6619178 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -2959,7 +2959,7 @@ static int macb_probe(struct platform_device *pdev) int gpio = of_get_named_gpio(phy_node, "reset-gpios", 0); if (gpio_is_valid(gpio)) bp->reset_gpio = gpio_to_desc(gpio); - gpiod_set_value(bp->reset_gpio, GPIOD_OUT_HIGH); + gpiod_direction_output(bp->reset_gpio, 1); } of_node_put(phy_node); @@ -3029,7 +3029,7 @@ static int macb_remove(struct platform_device *pdev) mdiobus_free(bp->mii_bus); /* Shutdown the PHY if there is a GPIO reset */ - gpiod_set_value(bp->reset_gpio, GPIOD_OUT_LOW); + gpiod_set_value(bp->reset_gpio, 0); unregister_netdev(dev); clk_disable_unprepare(bp->tx_clk); -- cgit v1.1