From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/net/dgrs_plx9060.h | 175 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 175 insertions(+) create mode 100644 drivers/net/dgrs_plx9060.h (limited to 'drivers/net/dgrs_plx9060.h') diff --git a/drivers/net/dgrs_plx9060.h b/drivers/net/dgrs_plx9060.h new file mode 100644 index 0000000..6888ae0 --- /dev/null +++ b/drivers/net/dgrs_plx9060.h @@ -0,0 +1,175 @@ +/* + * PLX 9060 PCI Interface chip + */ + +/* + * PCI configuration registers, same offset on local and PCI sides, + * but on PCI side, must use PCI BIOS calls to read/write. + */ +#define PCI_PLXREGS_BASE_ADDR 0x10 + +#define PCI_PLXREGS_IO_ADDR 0x14 + +#define PCI_SPACE0_BASE_ADDR 0x18 + +#define PCI_ROM_BASE_ADDR 0x30 +# define PCI_ROM_ENABLED 0x00000001 + +#define PCI_INT_LINE 0x3C + +/* + * Registers accessible directly from PCI and local side. + * Offset is from PCI side. Add PLX_LCL_OFFSET for local address. + */ +#define PLX_LCL_OFFSET 0x80 /* Offset of regs from local side */ + +/* + * Local Configuration Registers + */ +#define PLX_SPACE0_RANGE 0x00 /* Range for PCI to Lcl Addr Space 0 */ +#define PLX_SPACE0_BASE_ADDR 0x04 /* Lcl Base address remap */ + +#define PLX_ROM_RANGE 0x10 /* Range for expansion ROM (DMA) */ +#define PLX_ROM_BASE_ADDR 0x14 /* Lcl base address remap for ROM */ + +#define PLX_BUS_REGION 0x18 /* Bus Region Descriptors */ + +/* + * Shared Run Time Registers + */ +#define PLX_MBOX0 0x40 +#define PLX_MBOX1 0x44 +#define PLX_MBOX2 0x48 +#define PLX_MBOX3 0x4C +#define PLX_MBOX4 0x50 +#define PLX_MBOX5 0x54 +#define PLX_MBOX6 0x58 +#define PLX_MBOX7 0x5C + +#define PLX_PCI2LCL_DOORBELL 0x60 + +#define PLX_LCL2PCI_DOORBELL 0x64 + +#define PLX_INT_CSR 0x68 /* Interrupt Control/Status */ +# define PLX_LSERR_ENABLE 0x00000001 +# define PLX_LSERR_PE 0x00000002 +# define PLX_SERR 0x00000004 +# undef PLX_UNUSED /* 0x00000008 */ +# undef PLX_UNUSED /* 0x00000010 */ +# undef PLX_UNUSED /* 0x00000020 */ +# undef PLX_UNUSED /* 0x00000040 */ +# undef PLX_UNUSED /* 0x00000080 */ +# define PLX_PCI_IE 0x00000100 +# define PLX_PCI_DOORBELL_IE 0x00000200 +# define PLX_PCI_ABORT_IE 0x00000400 +# define PLX_PCI_LOCAL_IE 0x00000800 +# define PLX_RETRY_ABORT_ENABLE 0x00001000 +# define PLX_PCI_DOORBELL_INT 0x00002000 +# define PLX_PCI_ABORT_INT 0x00004000 +# define PLX_PCI_LOCAL_INT 0x00008000 +# define PLX_LCL_IE 0x00010000 +# define PLX_LCL_DOORBELL_IE 0x00020000 +# define PLX_LCL_DMA0_IE 0x00040000 +# define PLX_LCL_DMA1_IE 0x00080000 +# define PLX_LCL_DOORBELL_INT 0x00100000 +# define PLX_LCL_DMA0_INT 0x00200000 +# define PLX_LCL_DMA1_INT 0x00400000 +# define PLX_LCL_BIST_INT 0x00800000 +# define PLX_BM_DIRECT_ 0x01000000 +# define PLX_BM_DMA0_ 0x02000000 +# define PLX_BM_DMA1_ 0x04000000 +# define PLX_BM_ABORT_ 0x08000000 +# undef PLX_UNUSED /* 0x10000000 */ +# undef PLX_UNUSED /* 0x20000000 */ +# undef PLX_UNUSED /* 0x40000000 */ +# undef PLX_UNUSED /* 0x80000000 */ + +#define PLX_MISC_CSR 0x6c /* EEPROM,PCI,User,Init Control/Status*/ +# define PLX_USEROUT 0x00010000 +# define PLX_USERIN 0x00020000 +# define PLX_EECK 0x01000000 +# define PLX_EECS 0x02000000 +# define PLX_EEWD 0x04000000 +# define PLX_EERD 0x08000000 + +/* + * DMA registers. Offset is from local side + */ +#define PLX_DMA0_MODE 0x100 +# define PLX_DMA_MODE_WIDTH32 0x00000003 +# define PLX_DMA_MODE_WAITSTATES(X) ((X)<<2) +# define PLX_DMA_MODE_NOREADY 0x00000000 +# define PLX_DMA_MODE_READY 0x00000040 +# define PLX_DMA_MODE_NOBTERM 0x00000000 +# define PLX_DMA_MODE_BTERM 0x00000080 +# define PLX_DMA_MODE_NOBURST 0x00000000 +# define PLX_DMA_MODE_BURST 0x00000100 +# define PLX_DMA_MODE_NOCHAIN 0x00000000 +# define PLX_DMA_MODE_CHAIN 0x00000200 +# define PLX_DMA_MODE_DONE_IE 0x00000400 +# define PLX_DMA_MODE_ADDR_HOLD 0x00000800 + +#define PLX_DMA0_PCI_ADDR 0x104 + /* non-chaining mode PCI address */ + +#define PLX_DMA0_LCL_ADDR 0x108 + /* non-chaining mode local address */ + +#define PLX_DMA0_SIZE 0x10C + /* non-chaining mode length */ + +#define PLX_DMA0_DESCRIPTOR 0x110 +# define PLX_DMA_DESC_EOC 0x00000002 +# define PLX_DMA_DESC_TC_IE 0x00000004 +# define PLX_DMA_DESC_TO_HOST 0x00000008 +# define PLX_DMA_DESC_TO_BOARD 0x00000000 +# define PLX_DMA_DESC_NEXTADDR 0xFFFFfff0 + +#define PLX_DMA1_MODE 0x114 +#define PLX_DMA1_PCI_ADDR 0x118 +#define PLX_DMA1_LCL_ADDR 0x11C +#define PLX_DMA1_SIZE 0x110 +#define PLX_DMA1_DESCRIPTOR 0x124 + +#define PLX_DMA_CSR 0x128 +# define PLX_DMA_CSR_0_ENABLE 0x00000001 +# define PLX_DMA_CSR_0_START 0x00000002 +# define PLX_DMA_CSR_0_ABORT 0x00000004 +# define PLX_DMA_CSR_0_CLR_INTR 0x00000008 +# define PLX_DMA_CSR_0_DONE 0x00000010 +# define PLX_DMA_CSR_1_ENABLE 0x00000100 +# define PLX_DMA_CSR_1_START 0x00000200 +# define PLX_DMA_CSR_1_ABORT 0x00000400 +# define PLX_DMA_CSR_1_CLR_INTR 0x00000800 +# define PLX_DMA_CSR_1_DONE 0x00001000 + +#define PLX_DMA_ARB0 0x12C +# define PLX_DMA_ARB0_LATENCY_T 0x000000FF +# define PLX_DMA_ARB0_PAUSE_T 0x0000FF00 +# define PLX_DMA_ARB0_LATENCY_EN 0x00010000 +# define PLX_DMA_ARB0_PAUSE_EN 0x00020000 +# define PLX_DMA_ARB0_BREQ_EN 0x00040000 +# define PLX_DMA_ARB0_PRI 0x00180000 +# define PLX_DMA_ARB0_PRI_ROUND 0x00000000 +# define PLX_DMA_ARB0_PRI_0 0x00080000 +# define PLX_DMA_ARB0_PRI_1 0x00100000 + +#define PLX_DMA_ARB1 0x130 + /* Chan 0: FIFO DEPTH=16 */ +# define PLX_DMA_ARB1_0_P2L_LW_TRIG(X) ( ((X)&15) << 0 ) +# define PLX_DMA_ARB1_0_L2P_LR_TRIG(X) ( ((X)&15) << 4 ) +# define PLX_DMA_ARB1_0_L2P_PW_TRIG(X) ( ((X)&15) << 8 ) +# define PLX_DMA_ARB1_0_P2L_PR_TRIG(X) ( ((X)&15) << 12 ) + /* Chan 1: FIFO DEPTH=8 */ +# define PLX_DMA_ARB1_1_P2L_LW_TRIG(X) ( ((X)& 7) << 16 ) +# define PLX_DMA_ARB1_1_L2P_LR_TRIG(X) ( ((X)& 7) << 20 ) +# define PLX_DMA_ARB1_1_L2P_PW_TRIG(X) ( ((X)& 7) << 24 ) +# define PLX_DMA_ARB1_1_P2L_PR_TRIG(X) ( ((X)& 7) << 28 ) + +typedef struct _dmachain +{ + ulong pciaddr; + ulong lcladdr; + ulong len; + ulong next; +} DMACHAIN; -- cgit v1.1