From 8275c642ccdce09a2146d0a9eb022e3698ee927e Mon Sep 17 00:00:00 2001 From: Vitaly Wool Date: Sun, 8 Jan 2006 13:34:28 -0800 Subject: [PATCH] spi: use linked lists rather than an array This makes the SPI core and its users access transfers in the SPI message structure as linked list not as an array, as discussed on LKML. From: David Brownell Updates including doc, bugfixes to the list code, add spi_message_add_tail(). Plus, initialize things _before_ grabbing the locks in some cases (in case it grows more expensive). This also merges some bitbang updates of mine that didn't yet make it into the mm tree. Signed-off-by: Vitaly Wool Signed-off-by: Dmitry Pervushin Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/devices/m25p80.c | 50 ++++++++++++++++++------------------- drivers/mtd/devices/mtd_dataflash.c | 28 +++++++++++++-------- 2 files changed, 42 insertions(+), 36 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 71a0721..45108ed 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -245,6 +245,21 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, if (from + len > flash->mtd.size) return -EINVAL; + spi_message_init(&m); + memset(t, 0, (sizeof t)); + + t[0].tx_buf = flash->command; + t[0].len = sizeof(flash->command); + spi_message_add_tail(&t[0], &m); + + t[1].rx_buf = buf; + t[1].len = len; + spi_message_add_tail(&t[1], &m); + + /* Byte count starts at zero. */ + if (retlen) + *retlen = 0; + down(&flash->lock); /* Wait till previous write/erase is done. */ @@ -254,8 +269,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, return 1; } - memset(t, 0, (sizeof t)); - /* NOTE: OPCODE_FAST_READ (if available) is faster... */ /* Set up the write data buffer. */ @@ -264,19 +277,6 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, flash->command[2] = from >> 8; flash->command[3] = from; - /* Byte count starts at zero. */ - if (retlen) - *retlen = 0; - - t[0].tx_buf = flash->command; - t[0].len = sizeof(flash->command); - - t[1].rx_buf = buf; - t[1].len = len; - - m.transfers = t; - m.n_transfer = 2; - spi_sync(flash->spi, &m); *retlen = m.actual_length - sizeof(flash->command); @@ -313,6 +313,16 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, if (to + len > flash->mtd.size) return -EINVAL; + spi_message_init(&m); + memset(t, 0, (sizeof t)); + + t[0].tx_buf = flash->command; + t[0].len = sizeof(flash->command); + spi_message_add_tail(&t[0], &m); + + t[1].tx_buf = buf; + spi_message_add_tail(&t[1], &m); + down(&flash->lock); /* Wait until finished previous write command. */ @@ -321,26 +331,17 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, write_enable(flash); - memset(t, 0, (sizeof t)); - /* Set up the opcode in the write buffer. */ flash->command[0] = OPCODE_PP; flash->command[1] = to >> 16; flash->command[2] = to >> 8; flash->command[3] = to; - t[0].tx_buf = flash->command; - t[0].len = sizeof(flash->command); - - m.transfers = t; - m.n_transfer = 2; - /* what page do we start with? */ page_offset = to % FLASH_PAGESIZE; /* do all the bytes fit onto one page? */ if (page_offset + len <= FLASH_PAGESIZE) { - t[1].tx_buf = buf; t[1].len = len; spi_sync(flash->spi, &m); @@ -352,7 +353,6 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, /* the size of data remaining on the first page */ page_size = FLASH_PAGESIZE - page_offset; - t[1].tx_buf = buf; t[1].len = page_size; spi_sync(flash->spi, &m); diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index a39b3b6..99d3a03 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -147,7 +147,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) { struct dataflash *priv = (struct dataflash *)mtd->priv; struct spi_device *spi = priv->spi; - struct spi_transfer x[1] = { { .tx_dma = 0, }, }; + struct spi_transfer x = { .tx_dma = 0, }; struct spi_message msg; unsigned blocksize = priv->page_size << 3; u8 *command; @@ -162,10 +162,11 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) || (instr->addr % priv->page_size) != 0) return -EINVAL; - x[0].tx_buf = command = priv->command; - x[0].len = 4; - msg.transfers = x; - msg.n_transfer = 1; + spi_message_init(&msg); + + x.tx_buf = command = priv->command; + x.len = 4; + spi_message_add_tail(&x, &msg); down(&priv->lock); while (instr->len > 0) { @@ -256,12 +257,15 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, DEBUG(MTD_DEBUG_LEVEL3, "READ: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); + spi_message_init(&msg); + x[0].tx_buf = command; x[0].len = 8; + spi_message_add_tail(&x[0], &msg); + x[1].rx_buf = buf; x[1].len = len; - msg.transfers = x; - msg.n_transfer = 2; + spi_message_add_tail(&x[1], &msg); down(&priv->lock); @@ -320,9 +324,11 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, if ((to + len) > mtd->size) return -EINVAL; + spi_message_init(&msg); + x[0].tx_buf = command = priv->command; x[0].len = 4; - msg.transfers = x; + spi_message_add_tail(&x[0], &msg); pageaddr = ((unsigned)to / priv->page_size); offset = ((unsigned)to % priv->page_size); @@ -364,7 +370,6 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, DEBUG(MTD_DEBUG_LEVEL3, "TRANSFER: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); - msg.n_transfer = 1; status = spi_sync(spi, &msg); if (status < 0) DEBUG(MTD_DEBUG_LEVEL1, "%s: xfer %u -> %d \n", @@ -385,14 +390,16 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, x[1].tx_buf = writebuf; x[1].len = writelen; - msg.n_transfer = 2; + spi_message_add_tail(x + 1, &msg); status = spi_sync(spi, &msg); + spi_transfer_del(x + 1); if (status < 0) DEBUG(MTD_DEBUG_LEVEL1, "%s: pgm %u/%u -> %d \n", spi->dev.bus_id, addr, writelen, status); (void) dataflash_waitready(priv->spi); + #ifdef CONFIG_DATAFLASH_WRITE_VERIFY /* (3) Compare to Buffer1 */ @@ -405,7 +412,6 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, DEBUG(MTD_DEBUG_LEVEL3, "COMPARE: (%x) %x %x %x\n", command[0], command[1], command[2], command[3]); - msg.n_transfer = 1; status = spi_sync(spi, &msg); if (status < 0) DEBUG(MTD_DEBUG_LEVEL1, "%s: compare %u -> %d \n", -- cgit v1.1