From 3fc2389847a84d06263c13a3b6dfe1f1d6eea935 Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Sun, 12 Oct 2008 08:42:28 +0200 Subject: [MTD] [NAND] Bug on atmel_nand HW ECC : OOB info not correctly written The functions that write the OOB info (on hardware ECC only) use the HW_SYNDROME method. This is not correct : the start position is "pos = eccsize + chunk" and should be eccsize. So, the standard (nand_write_oob_std) function should be used. This patch corrects this by using NAND_ECC_HW instead of NAND_ECC_HW_SYNDROME. This has only been tested on small pages nand flash. (if anyone can test it on large pages that would be great). kernel version : 2.6.27-rc2 (current git mtd-2.6) Signed-off-by: Richard Genoud Signed-off-by: David Woodhouse --- drivers/mtd/nand/atmel_nand.c | 58 +++++-------------------------------------- 1 file changed, 6 insertions(+), 52 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 3387e0d..c98c1570 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -174,48 +174,6 @@ static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len) } /* - * write oob for small pages - */ -static int atmel_nand_write_oob_512(struct mtd_info *mtd, - struct nand_chip *chip, int page) -{ - int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad; - int eccsize = chip->ecc.size, length = mtd->oobsize; - int len, pos, status = 0; - const uint8_t *bufpoi = chip->oob_poi; - - pos = eccsize + chunk; - - chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page); - len = min_t(int, length, chunk); - chip->write_buf(mtd, bufpoi, len); - bufpoi += len; - length -= len; - if (length > 0) - chip->write_buf(mtd, bufpoi, length); - - chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); - status = chip->waitfunc(mtd, chip); - - return status & NAND_STATUS_FAIL ? -EIO : 0; - -} - -/* - * read oob for small pages - */ -static int atmel_nand_read_oob_512(struct mtd_info *mtd, - struct nand_chip *chip, int page, int sndcmd) -{ - if (sndcmd) { - chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); - sndcmd = 0; - } - chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); - return sndcmd; -} - -/* * Calculate HW ECC * * function called after a write @@ -235,14 +193,14 @@ static int atmel_nand_calculate(struct mtd_info *mtd, /* get the first 2 ECC bytes */ ecc_value = ecc_readl(host->ecc, PR); - ecc_code[eccpos[0]] = ecc_value & 0xFF; - ecc_code[eccpos[1]] = (ecc_value >> 8) & 0xFF; + ecc_code[0] = ecc_value & 0xFF; + ecc_code[1] = (ecc_value >> 8) & 0xFF; /* get the last 2 ECC bytes */ ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY; - ecc_code[eccpos[2]] = ecc_value & 0xFF; - ecc_code[eccpos[3]] = (ecc_value >> 8) & 0xFF; + ecc_code[2] = ecc_value & 0xFF; + ecc_code[3] = (ecc_value >> 8) & 0xFF; return 0; } @@ -476,14 +434,12 @@ static int __init atmel_nand_probe(struct platform_device *pdev) res = -EIO; goto err_ecc_ioremap; } - nand_chip->ecc.mode = NAND_ECC_HW_SYNDROME; + nand_chip->ecc.mode = NAND_ECC_HW; nand_chip->ecc.calculate = atmel_nand_calculate; nand_chip->ecc.correct = atmel_nand_correct; nand_chip->ecc.hwctl = atmel_nand_hwctl; nand_chip->ecc.read_page = atmel_nand_read_page; nand_chip->ecc.bytes = 4; - nand_chip->ecc.prepad = 0; - nand_chip->ecc.postpad = 0; } nand_chip->chip_delay = 20; /* 20us command delay time */ @@ -514,7 +470,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) goto err_scan_ident; } - if (nand_chip->ecc.mode == NAND_ECC_HW_SYNDROME) { + if (nand_chip->ecc.mode == NAND_ECC_HW) { /* ECC is calculated for the whole page (1 step) */ nand_chip->ecc.size = mtd->writesize; @@ -522,8 +478,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev) switch (mtd->writesize) { case 512: nand_chip->ecc.layout = &atmel_oobinfo_small; - nand_chip->ecc.read_oob = atmel_nand_read_oob_512; - nand_chip->ecc.write_oob = atmel_nand_write_oob_512; ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528); break; case 1024: -- cgit v1.1