From 7abd3ef9875eb2afcdcd4f450680298a2983a55e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 23 May 2006 23:25:53 +0200 Subject: [MTD] Refactor NAND hwcontrol to cmd_ctrl The hwcontrol function enforced a step by step state machine for any kind of hardware chip access. Let the hardware driver know which control bits are set and inform it about a change of the control lines. Let the hardware driver write out the command and address bytes directly. This gives a peformance advantage for address bus controlled chips and simplifies the quirks in the hardware drivers. Signed-off-by: Thomas Gleixner --- drivers/mtd/nand/ams-delta.c | 56 +++++++++---------- drivers/mtd/nand/au1550nd.c | 25 ++++++--- drivers/mtd/nand/autcpu12.c | 77 +++++++++++++++---------- drivers/mtd/nand/cs553x_nand.c | 32 +++-------- drivers/mtd/nand/diskonchip.c | 77 ++++++++++--------------- drivers/mtd/nand/edb7312.c | 42 ++++++-------- drivers/mtd/nand/h1910.c | 40 ++++--------- drivers/mtd/nand/nand_base.c | 115 ++++++++++++++++++-------------------- drivers/mtd/nand/nandsim.c | 76 +++++-------------------- drivers/mtd/nand/ndfc.c | 23 +++----- drivers/mtd/nand/ppchameleonevb.c | 102 ++++++++++++++++++--------------- drivers/mtd/nand/rtc_from4.c | 34 ++++------- drivers/mtd/nand/s3c2410.c | 64 +++++++-------------- drivers/mtd/nand/sharpsl.c | 41 ++++++-------- drivers/mtd/nand/spia.c | 27 +++++---- drivers/mtd/nand/toto.c | 65 ++++++++++----------- drivers/mtd/nand/ts7250.c | 44 +++++++-------- 17 files changed, 413 insertions(+), 527 deletions(-) (limited to 'drivers/mtd/nand') diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index aeaf2de..c0e9686 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -34,13 +34,6 @@ static struct mtd_info *ams_delta_mtd = NULL; #define NAND_MASK (AMS_DELTA_LATCH2_NAND_NRE | AMS_DELTA_LATCH2_NAND_NWE | AMS_DELTA_LATCH2_NAND_CLE | AMS_DELTA_LATCH2_NAND_ALE | AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP) -#define T_NAND_CTL_CLRALE(iob) ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_ALE, 0) -#define T_NAND_CTL_SETALE(iob) ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_ALE, AMS_DELTA_LATCH2_NAND_ALE) -#define T_NAND_CTL_CLRCLE(iob) ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_CLE, 0) -#define T_NAND_CTL_SETCLE(iob) ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_CLE, AMS_DELTA_LATCH2_NAND_CLE) -#define T_NAND_CTL_SETNCE(iob) ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NCE, 0) -#define T_NAND_CTL_CLRNCE(iob) ams_delta_latch2_write(AMS_DELTA_LATCH2_NAND_NCE, AMS_DELTA_LATCH2_NAND_NCE) - /* * Define partitions for flash devices */ @@ -66,25 +59,6 @@ static struct mtd_partition partition_info[] = { .size = 3 * SZ_256K }, }; -/* - * hardware specific access to control-lines -*/ - -static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd) -{ - switch (cmd) { - - case NAND_CTL_SETCLE: T_NAND_CTL_SETCLE(cmd); break; - case NAND_CTL_CLRCLE: T_NAND_CTL_CLRCLE(cmd); break; - - case NAND_CTL_SETALE: T_NAND_CTL_SETALE(cmd); break; - case NAND_CTL_CLRALE: T_NAND_CTL_CLRALE(cmd); break; - - case NAND_CTL_SETNCE: T_NAND_CTL_SETNCE(cmd); break; - case NAND_CTL_CLRNCE: T_NAND_CTL_CLRNCE(cmd); break; - } -} - static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte) { struct nand_chip *this = mtd->priv; @@ -141,6 +115,32 @@ static int ams_delta_verify_buf(struct mtd_info *mtd, const u_char *buf, return 0; } +/* + * Command control function + * + * ctrl: + * NAND_NCE: bit 0 -> bit 2 + * NAND_CLE: bit 1 -> bit 7 + * NAND_ALE: bit 2 -> bit 6 + */ +static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned long bits; + + bits = (~ctrl & NAND_NCE) << 2; + bits |= (ctrl & NAND_CLE) << 7; + bits |= (ctrl & NAND_ALE) << 6; + + ams_delta_latch2_write(0xC2, bits); + } + + if (cmd != NAND_CMD_NONE) + ams_delta_write_byte(mtd, cmd); +} + static int ams_delta_nand_ready(struct mtd_info *mtd) { return omap_get_gpio_datain(AMS_DELTA_GPIO_PIN_NAND_RB); @@ -183,7 +183,7 @@ static int __init ams_delta_init(void) this->write_buf = ams_delta_write_buf; this->read_buf = ams_delta_read_buf; this->verify_buf = ams_delta_verify_buf; - this->hwcontrol = ams_delta_hwcontrol; + this->cmd_ctrl = ams_delta_hwcontrol; if (!omap_request_gpio(AMS_DELTA_GPIO_PIN_NAND_RB)) { this->dev_ready = ams_delta_nand_ready; } else { @@ -200,7 +200,7 @@ static int __init ams_delta_init(void) AMS_DELTA_LATCH2_NAND_NCE | AMS_DELTA_LATCH2_NAND_NWP); - /* Scan to find existance of the device */ + /* Scan to find existance of the device */ if (nand_scan(ams_delta_mtd, 1)) { err = -ENXIO; goto out_mtd; diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 29dde7d..275453e 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -269,6 +269,18 @@ static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) return 0; } +/* Select the chip by setting nCE to low */ +#define NAND_CTL_SETNCE 1 +/* Deselect the chip by setting nCE to high */ +#define NAND_CTL_CLRNCE 2 +/* Select the command latch by setting CLE to high */ +#define NAND_CTL_SETCLE 3 +/* Deselect the command latch by setting CLE to low */ +#define NAND_CTL_CLRCLE 4 +/* Select the address latch by setting ALE to high */ +#define NAND_CTL_SETALE 5 +/* Deselect the address latch by setting ALE to low */ +#define NAND_CTL_CLRALE 6 static void au1550_hwcontrol(struct mtd_info *mtd, int cmd) { @@ -349,7 +361,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i ulong flags; /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); + au1550_hwcontrol(mtd, NAND_CTL_SETCLE); /* * Write out the command to the device. */ @@ -372,10 +384,10 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i this->write_byte(mtd, command); /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + au1550_hwcontrol(mtd, NAND_CTL_CLRCLE); if (column != -1 || page_addr != -1) { - this->hwcontrol(mtd, NAND_CTL_SETALE); + au1550_hwcontrol(mtd, NAND_CTL_SETALE); /* Serially input address */ if (column != -1) { @@ -400,7 +412,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i */ ce_override = 1; local_irq_save(flags); - this->hwcontrol(mtd, NAND_CTL_SETNCE); + au1550_hwcontrol(mtd, NAND_CTL_SETNCE); } this->write_byte(mtd, (u8)(page_addr >> 8)); @@ -410,7 +422,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i this->write_byte(mtd, (u8)((page_addr >> 16) & 0x0f)); } /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); + au1550_hwcontrol(mtd, NAND_CTL_CLRALE); } /* @@ -443,7 +455,7 @@ static void au1550_command(struct mtd_info *mtd, unsigned command, int column, i udelay(1); /* Release -CE and re-enable interrupts. */ - this->hwcontrol(mtd, NAND_CTL_CLRNCE); + au1550_hwcontrol(mtd, NAND_CTL_CLRNCE); local_irq_restore(flags); return; } @@ -571,7 +583,6 @@ static int __init au1xxx_nand_init(void) nand_width = au_readl(MEM_STCFG3) & (1 << 22); /* Set address of hardware control function */ - this->hwcontrol = au1550_hwcontrol; this->dev_ready = au1550_device_ready; this->select_chip = au1550_select_chip; this->cmdfunc = au1550_command; diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index dbb1b626..fe94ae9a 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -4,7 +4,7 @@ * Copyright (c) 2002 Thomas Gleixner * * Derived from drivers/mtd/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * * $Id: autcpu12.c,v 1.23 2005/11/07 11:14:30 gleixner Exp $ * @@ -42,11 +42,6 @@ * MTD structure for AUTCPU12 board */ static struct mtd_info *autcpu12_mtd = NULL; - -static int autcpu12_io_base = CS89712_VIRT_BASE; -static int autcpu12_fio_pbase = AUTCPU12_PHYS_SMC; -static int autcpu12_fio_ctrl = AUTCPU12_SMC_SELECT_OFFSET; -static int autcpu12_pedr = AUTCPU12_SMC_PORT_OFFSET; static void __iomem *autcpu12_fio_base; /* @@ -94,31 +89,42 @@ static struct mtd_partition partition_info128k[] = { #define NUM_PARTITIONS128K 2 /* * hardware specific access to control-lines -*/ - -static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd) + * + * ALE bit 4 autcpu12_pedr + * CLE bit 5 autcpu12_pedr + * NCE bit 0 fio_ctrl + * + */ +static void autcpu12_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { - switch (cmd) { + struct nand_chip *chip = mtd->priv; - case NAND_CTL_SETCLE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) |= AUTCPU12_SMC_CLE; break; - case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) &= ~AUTCPU12_SMC_CLE; break; + if (ctrl & NAND_CTRL_CHANGE) { + void __iomem *addr + unsigned char bits; - case NAND_CTL_SETALE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) |= AUTCPU12_SMC_ALE; break; - case NAND_CTL_CLRALE: (*(volatile unsigned char *) (autcpu12_io_base + autcpu12_pedr)) &= ~AUTCPU12_SMC_ALE; break; + addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET; + bits = (ctrl & NAND_CLE) << 4; + bits |= (ctrl & NAND_ALE) << 2; + writeb((readb(addr) & ~0x30) | bits, addr); - case NAND_CTL_SETNCE: (*(volatile unsigned char *) (autcpu12_fio_base + autcpu12_fio_ctrl)) = 0x01; break; - case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (autcpu12_fio_base + autcpu12_fio_ctrl)) = 0x00; break; + addr = autcpu12_fio_base + AUTCPU12_SMC_SELECT_OFFSET; + writeb((readb(addr) & ~0x1) | (ctrl & NAND_NCE), addr); } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } /* -* read device ready pin -*/ + * read device ready pin + */ int autcpu12_device_ready(struct mtd_info *mtd) { + void __iomem *addr = CS89712_VIRT_BASE + AUTCPU12_SMC_PORT_OFFSET; - return ((*(volatile unsigned char *)(autcpu12_io_base + autcpu12_pedr)) & AUTCPU12_SMC_RDY) ? 1 : 0; - + return readb(addr) & AUTCPU12_SMC_RDY; } /* @@ -130,7 +136,8 @@ static int __init autcpu12_init(void) int err = 0; /* Allocate memory for MTD device structure and private data */ - autcpu12_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL); + autcpu12_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), + GFP_KERNEL); if (!autcpu12_mtd) { printk("Unable to allocate AUTCPU12 NAND MTD device structure.\n"); err = -ENOMEM; @@ -138,7 +145,7 @@ static int __init autcpu12_init(void) } /* map physical adress */ - autcpu12_fio_base = ioremap(autcpu12_fio_pbase, SZ_1K); + autcpu12_fio_base = ioremap(AUTCPU12_PHYS_SMC, SZ_1K); if (!autcpu12_fio_base) { printk("Ioremap autcpu12 SmartMedia Card failed\n"); err = -EIO; @@ -159,7 +166,7 @@ static int __init autcpu12_init(void) /* Set address of NAND IO lines */ this->IO_ADDR_R = autcpu12_fio_base; this->IO_ADDR_W = autcpu12_fio_base; - this->hwcontrol = autcpu12_hwcontrol; + this->cmd_ctrl = autcpu12_hwcontrol; this->dev_ready = autcpu12_device_ready; /* 20 us command delay time */ this->chip_delay = 20; @@ -179,10 +186,22 @@ static int __init autcpu12_init(void) /* Register the partitions */ switch (autcpu12_mtd->size) { - case SZ_16M: add_mtd_partitions(autcpu12_mtd, partition_info16k, NUM_PARTITIONS16K); break; - case SZ_32M: add_mtd_partitions(autcpu12_mtd, partition_info32k, NUM_PARTITIONS32K); break; - case SZ_64M: add_mtd_partitions(autcpu12_mtd, partition_info64k, NUM_PARTITIONS64K); break; - case SZ_128M: add_mtd_partitions(autcpu12_mtd, partition_info128k, NUM_PARTITIONS128K); break; + case SZ_16M: + add_mtd_partitions(autcpu12_mtd, partition_info16k, + NUM_PARTITIONS16K); + break; + case SZ_32M: + add_mtd_partitions(autcpu12_mtd, partition_info32k, + NUM_PARTITIONS32K); + break; + case SZ_64M: + add_mtd_partitions(autcpu12_mtd, partition_info64k, + NUM_PARTITIONS64K); + break; + case SZ_128M: + add_mtd_partitions(autcpu12_mtd, partition_info128k, + NUM_PARTITIONS128K); + break; default: printk("Unsupported SmartMedia device\n"); err = -ENXIO; @@ -191,7 +210,7 @@ static int __init autcpu12_init(void) goto out; out_ior: - iounmap((void *)autcpu12_fio_base); + iounmap(autcpu12_fio_base); out_mtd: kfree(autcpu12_mtd); out: @@ -209,7 +228,7 @@ static void __exit autcpu12_cleanup(void) nand_release(autcpu12_mtd); /* unmap physical adress */ - iounmap((void *)autcpu12_fio_base); + iounmap(autcpu12_fio_base); /* Free the MTD device structure */ kfree(autcpu12_mtd); diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 064f3fe..cd3d7eb 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -131,33 +131,17 @@ static void cs553x_write_byte(struct mtd_info *mtd, u_char byte) writeb(byte, this->IO_ADDR_W + 0x801); } -static void cs553x_hwcontrol(struct mtd_info *mtd, int cmd) +static void cs553x_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { struct nand_chip *this = mtd->priv; void __iomem *mmio_base = this->IO_ADDR_R; - unsigned char ctl; - - switch (cmd) { - case NAND_CTL_SETCLE: - ctl = CS_NAND_CTL_CLE; - break; - - case NAND_CTL_CLRCLE: - case NAND_CTL_CLRALE: - case NAND_CTL_SETNCE: - ctl = 0; - break; - - case NAND_CTL_SETALE: - ctl = CS_NAND_CTL_ALE; - break; - - default: - case NAND_CTL_CLRNCE: - ctl = CS_NAND_CTL_CE; - break; + if (ctrl & NAND_CTRL_CHANGE) { + unsigned char ctl = (ctrl & ~NAND_CTRL_CHANGE ) ^ 0x01; + writeb(ctl, mmio_base + MM_NAND_CTL); } - writeb(ctl, mmio_base + MM_NAND_CTL); + if (cmd != NAND_CMD_NONE) + cs553x_write_byte(mtd, cmd); } static int cs553x_device_ready(struct mtd_info *mtd) @@ -233,7 +217,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) goto out_mtd; } - this->hwcontrol = cs553x_hwcontrol; + this->cmd_ctrl = cs553x_hwcontrol; this->dev_ready = cs553x_device_ready; this->read_byte = cs553x_read_byte; this->write_byte = cs553x_write_byte; diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index f77298f..e4bb6b4 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -95,7 +95,8 @@ static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 }; #define DoC_is_Millennium(doc) ((doc)->ChipID == DOC_ChipID_DocMil) #define DoC_is_2000(doc) ((doc)->ChipID == DOC_ChipID_Doc2k) -static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd); +static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int bitmask); static void doc200x_select_chip(struct mtd_info *mtd, int chip); static int debug = 0; @@ -402,12 +403,10 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) uint16_t ret; doc200x_select_chip(mtd, nr); - doc200x_hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_READID); - doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE); - doc200x_hwcontrol(mtd, NAND_CTL_SETALE); - this->write_byte(mtd, 0); - doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); + doc200x_hwcontrol(mtd, NAND_CMD_READID, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE); + doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* We cant' use dev_ready here, but at least we wait for the * command to complete @@ -425,12 +424,11 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) } ident; void __iomem *docptr = doc->virtadr; - doc200x_hwcontrol(mtd, NAND_CTL_SETCLE); - doc2000_write_byte(mtd, NAND_CMD_READID); - doc200x_hwcontrol(mtd, NAND_CTL_CLRCLE); - doc200x_hwcontrol(mtd, NAND_CTL_SETALE); - doc2000_write_byte(mtd, 0); - doc200x_hwcontrol(mtd, NAND_CTL_CLRALE); + doc200x_hwcontrol(mtd, NAND_CMD_READID, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE); + doc200x_hwcontrol(mtd, NAND_CMD_NONE, + NAND_NCE | NAND_CTRL_CHANGE); udelay(50); @@ -690,54 +688,37 @@ static void doc200x_select_chip(struct mtd_info *mtd, int chip) chip -= (floor * doc->chips_per_floor); /* 11.4.4 -- deassert CE before changing chip */ - doc200x_hwcontrol(mtd, NAND_CTL_CLRNCE); + doc200x_hwcontrol(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); WriteDOC(floor, docptr, FloorSelect); WriteDOC(chip, docptr, CDSNDeviceSelect); - doc200x_hwcontrol(mtd, NAND_CTL_SETNCE); + doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); doc->curchip = chip; doc->curfloor = floor; } -static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd) +#define CDSN_CTRL_MSK (CDSN_CTRL_CE | CDSN_CTRL_CLE | CDSN_CTRL_ALE) + +static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { struct nand_chip *this = mtd->priv; struct doc_priv *doc = this->priv; void __iomem *docptr = doc->virtadr; - switch (cmd) { - case NAND_CTL_SETNCE: - doc->CDSNControl |= CDSN_CTRL_CE; - break; - case NAND_CTL_CLRNCE: - doc->CDSNControl &= ~CDSN_CTRL_CE; - break; - case NAND_CTL_SETCLE: - doc->CDSNControl |= CDSN_CTRL_CLE; - break; - case NAND_CTL_CLRCLE: - doc->CDSNControl &= ~CDSN_CTRL_CLE; - break; - case NAND_CTL_SETALE: - doc->CDSNControl |= CDSN_CTRL_ALE; - break; - case NAND_CTL_CLRALE: - doc->CDSNControl &= ~CDSN_CTRL_ALE; - break; - case NAND_CTL_SETWP: - doc->CDSNControl |= CDSN_CTRL_WP; - break; - case NAND_CTL_CLRWP: - doc->CDSNControl &= ~CDSN_CTRL_WP; - break; + if (ctrl & NAND_CTRL_CHANGE) { + doc->CDSNControl &= ~CDSN_CTRL_MSK; + doc->CDSNControl |= ctrl & CDSN_CTRL_MSK; + if (debug) + printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl); + WriteDOC(doc->CDSNControl, docptr, CDSNControl); + /* 11.4.3 -- 4 NOPs after CSDNControl write */ + DoC_Delay(doc, 4); } - if (debug) - printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl); - WriteDOC(doc->CDSNControl, docptr, CDSNControl); - /* 11.4.3 -- 4 NOPs after CSDNControl write */ - DoC_Delay(doc, 4); + if (cmd != NAND_CMD_NONE) + this->write_byte(mtd, cmd); } static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int column, int page_addr) @@ -1510,7 +1491,7 @@ static inline int __init doc2001plus_init(struct mtd_info *mtd) this->read_buf = doc2001plus_readbuf; this->verify_buf = doc2001plus_verifybuf; this->scan_bbt = inftl_scan_bbt; - this->hwcontrol = NULL; + this->cmd_ctrl = NULL; this->select_chip = doc2001plus_select_chip; this->cmdfunc = doc2001plus_command; this->ecc.hwctl = doc2001plus_enable_hwecc; @@ -1670,7 +1651,7 @@ static int __init doc_probe(unsigned long physadr) nand->priv = doc; nand->select_chip = doc200x_select_chip; - nand->hwcontrol = doc200x_hwcontrol; + nand->cmd_ctrl = doc200x_hwcontrol; nand->dev_ready = doc200x_dev_ready; nand->waitfunc = doc200x_wait; nand->block_bad = doc200x_block_bad; diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c index 8e56570..ba5a217 100644 --- a/drivers/mtd/nand/edb7312.c +++ b/drivers/mtd/nand/edb7312.c @@ -73,32 +73,26 @@ static struct mtd_partition partition_info[] = { /* * hardware specific access to control-lines + * + * NAND_NCE: bit 0 -> bit 7 + * NAND_CLE: bit 1 -> bit 4 + * NAND_ALE: bit 2 -> bit 5 */ -static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd) +static void ep7312_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - switch (cmd) { - - case NAND_CTL_SETCLE: - clps_writeb(clps_readb(ep7312_pxdr) | 0x10, ep7312_pxdr); - break; - case NAND_CTL_CLRCLE: - clps_writeb(clps_readb(ep7312_pxdr) & ~0x10, ep7312_pxdr); - break; - - case NAND_CTL_SETALE: - clps_writeb(clps_readb(ep7312_pxdr) | 0x20, ep7312_pxdr); - break; - case NAND_CTL_CLRALE: - clps_writeb(clps_readb(ep7312_pxdr) & ~0x20, ep7312_pxdr); - break; - - case NAND_CTL_SETNCE: - clps_writeb((clps_readb(ep7312_pxdr) | 0x80) & ~0x40, ep7312_pxdr); - break; - case NAND_CTL_CLRNCE: - clps_writeb((clps_readb(ep7312_pxdr) | 0x80) | 0x40, ep7312_pxdr); - break; + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned char bits; + + bits = (ctrl & (NAND_CLE | NAND_ALE)) << 3; + bits = (ctrl & NAND_NCE) << 7; + + clps_writeb((clps_readb(ep7312_pxdr) & 0xB0) | 0x10, + ep7312_pxdr); } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } /* @@ -159,7 +153,7 @@ static int __init ep7312_init(void) /* insert callbacks */ this->IO_ADDR_R = ep7312_fio_base; this->IO_ADDR_W = ep7312_fio_base; - this->hwcontrol = ep7312_hwcontrol; + this->cmd_ctrl = ep7312_hwcontrol; this->dev_ready = ep7312_device_ready; /* 15 us command delay time */ this->chip_delay = 15; diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c index 06e91fa..2d585d2 100644 --- a/drivers/mtd/nand/h1910.c +++ b/drivers/mtd/nand/h1910.c @@ -56,36 +56,18 @@ static struct mtd_partition partition_info[] = { /* * hardware specific access to control-lines + * + * NAND_NCE: bit 0 - don't care + * NAND_CLE: bit 1 - address bit 2 + * NAND_ALE: bit 2 - address bit 3 */ -static void h1910_hwcontrol(struct mtd_info *mtd, int cmd) +static void h1910_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { - struct nand_chip *this = (struct nand_chip *)(mtd->priv); - - switch (cmd) { - - case NAND_CTL_SETCLE: - this->IO_ADDR_R |= (1 << 2); - this->IO_ADDR_W |= (1 << 2); - break; - case NAND_CTL_CLRCLE: - this->IO_ADDR_R &= ~(1 << 2); - this->IO_ADDR_W &= ~(1 << 2); - break; - - case NAND_CTL_SETALE: - this->IO_ADDR_R |= (1 << 3); - this->IO_ADDR_W |= (1 << 3); - break; - case NAND_CTL_CLRALE: - this->IO_ADDR_R &= ~(1 << 3); - this->IO_ADDR_W &= ~(1 << 3); - break; - - case NAND_CTL_SETNCE: - break; - case NAND_CTL_CLRNCE: - break; - } + struct nand_chip *chip = mtd->priv; + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W | ((ctrl & 0x6) << 1)); } /* @@ -145,7 +127,7 @@ static int __init h1910_init(void) /* insert callbacks */ this->IO_ADDR_R = nandaddr; this->IO_ADDR_W = nandaddr; - this->hwcontrol = h1910_hwcontrol; + this->cmd_ctrl = h1910_hwcontrol; this->dev_ready = NULL; /* unknown whether that was correct or not so we will just do it like this */ /* 15 us command delay time */ this->chip_delay = 50; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index aa2e145..f6997fb 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -276,10 +276,10 @@ static void nand_select_chip(struct mtd_info *mtd, int chip) struct nand_chip *this = mtd->priv; switch (chip) { case -1: - this->hwcontrol(mtd, NAND_CTL_CLRNCE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE); break; case 0: - this->hwcontrol(mtd, NAND_CTL_SETNCE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); break; default: @@ -548,13 +548,12 @@ static void nand_wait_ready(struct mtd_info *mtd) * Send command to NAND device. This function is used for small page * devices (256/512 Bytes per page) */ -static void nand_command(struct mtd_info *mtd, unsigned command, int column, - int page_addr) +static void nand_command(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) { register struct nand_chip *this = mtd->priv; + int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE; - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); /* * Write out the command to the device. */ @@ -572,33 +571,32 @@ static void nand_command(struct mtd_info *mtd, unsigned command, int column, column -= 256; readcmd = NAND_CMD_READ1; } - this->write_byte(mtd, readcmd); + this->cmd_ctrl(mtd, readcmd, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; } - this->write_byte(mtd, command); + this->cmd_ctrl(mtd, command, ctrl); - /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - - if (column != -1 || page_addr != -1) { - this->hwcontrol(mtd, NAND_CTL_SETALE); - - /* Serially input address */ - if (column != -1) { - /* Adjust columns for 16 bit buswidth */ - if (this->options & NAND_BUSWIDTH_16) - column >>= 1; - this->write_byte(mtd, column); - } - if (page_addr != -1) { - this->write_byte(mtd, (uint8_t)(page_addr & 0xff)); - this->write_byte(mtd, (uint8_t)((page_addr >> 8) & 0xff)); - /* One more address cycle for devices > 32MiB */ - if (this->chipsize > (32 << 20)) - this->write_byte(mtd, (uint8_t)((page_addr >> 16) & 0x0f)); - } - /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); + /* + * Address cycle, when necessary + */ + ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE; + /* Serially input address */ + if (column != -1) { + /* Adjust columns for 16 bit buswidth */ + if (this->options & NAND_BUSWIDTH_16) + column >>= 1; + this->cmd_ctrl(mtd, column, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + } + if (page_addr != -1) { + this->cmd_ctrl(mtd, page_addr, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + this->cmd_ctrl(mtd, page_addr >> 8, ctrl); + /* One more address cycle for devices > 32MiB */ + if (this->chipsize > (32 << 20)) + this->cmd_ctrl(mtd, page_addr >> 16, ctrl); } + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * program and erase have their own busy handlers @@ -611,15 +609,16 @@ static void nand_command(struct mtd_info *mtd, unsigned command, int column, case NAND_CMD_ERASE2: case NAND_CMD_SEQIN: case NAND_CMD_STATUS: + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE); return; case NAND_CMD_RESET: if (this->dev_ready) break; udelay(this->chip_delay); - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_STATUS); - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + this->cmd_ctrl(mtd, NAND_CMD_STATUS, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE); while (!(this->read_byte(mtd) & NAND_STATUS_READY)) ; return; @@ -648,12 +647,13 @@ static void nand_command(struct mtd_info *mtd, unsigned command, int column, * @column: the column address for this command, -1 if none * @page_addr: the page address for this command, -1 if none * - * Send command to NAND device. This is the version for the new large page devices - * We dont have the separate regions as we have in the small page devices. - * We must emulate NAND_CMD_READOOB to keep the code compatible. + * Send command to NAND device. This is the version for the new large page + * devices We dont have the separate regions as we have in the small page + * devices. We must emulate NAND_CMD_READOOB to keep the code compatible. * */ -static void nand_command_lp(struct mtd_info *mtd, unsigned command, int column, int page_addr) +static void nand_command_lp(struct mtd_info *mtd, unsigned int command, + int column, int page_addr) { register struct nand_chip *this = mtd->priv; @@ -663,34 +663,33 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned command, int column, command = NAND_CMD_READ0; } - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - /* Write out the command to the device. */ - this->write_byte(mtd, (command & 0xff)); - /* End command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + /* Command latch cycle */ + this->cmd_ctrl(mtd, command & 0xff, + NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE); if (column != -1 || page_addr != -1) { - this->hwcontrol(mtd, NAND_CTL_SETALE); + int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE; /* Serially input address */ if (column != -1) { /* Adjust columns for 16 bit buswidth */ if (this->options & NAND_BUSWIDTH_16) column >>= 1; - this->write_byte(mtd, column & 0xff); - this->write_byte(mtd, column >> 8); + this->cmd_ctrl(mtd, column, ctrl); + ctrl &= ~NAND_CTRL_CHANGE; + this->cmd_ctrl(mtd, column >> 8, ctrl); } if (page_addr != -1) { - this->write_byte(mtd, (uint8_t)(page_addr & 0xff)); - this->write_byte(mtd, (uint8_t)((page_addr >> 8) & 0xff)); + this->cmd_ctrl(mtd, page_addr, ctrl); + this->cmd_ctrl(mtd, page_addr >> 8, + NAND_NCE | NAND_ALE); /* One more address cycle for devices > 128MiB */ if (this->chipsize > (128 << 20)) - this->write_byte(mtd, (uint8_t)((page_addr >> 16) & 0xff)); + this->cmd_ctrl(mtd, page_addr >> 16, + NAND_NCE | NAND_ALE); } - /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); } + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); /* * program and erase have their own busy handlers @@ -722,20 +721,14 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned command, int column, if (this->dev_ready) break; udelay(this->chip_delay); - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_STATUS); - this->hwcontrol(mtd, NAND_CTL_CLRCLE); + this->cmd_ctrl(mtd, NAND_CMD_STATUS, NAND_NCE | NAND_CLE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE); while (!(this->read_byte(mtd) & NAND_STATUS_READY)) ; return; case NAND_CMD_READ0: - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - /* Write out the start read command */ - this->write_byte(mtd, NAND_CMD_READSTART); - /* End command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - /* Fall through into ready check */ + this->cmd_ctrl(mtd, NAND_CMD_READSTART, NAND_NCE | NAND_CLE); + this->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE); /* This applies to read commands */ default: diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 22af9b2..ecf727b 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -1071,68 +1071,6 @@ switch_state(struct nandsim *ns) } } -static void -ns_hwcontrol(struct mtd_info *mtd, int cmd) -{ - struct nandsim *ns = (struct nandsim *)((struct nand_chip *)mtd->priv)->priv; - - switch (cmd) { - - /* set CLE line high */ - case NAND_CTL_SETCLE: - NS_DBG("ns_hwcontrol: start command latch cycles\n"); - ns->lines.cle = 1; - break; - - /* set CLE line low */ - case NAND_CTL_CLRCLE: - NS_DBG("ns_hwcontrol: stop command latch cycles\n"); - ns->lines.cle = 0; - break; - - /* set ALE line high */ - case NAND_CTL_SETALE: - NS_DBG("ns_hwcontrol: start address latch cycles\n"); - ns->lines.ale = 1; - break; - - /* set ALE line low */ - case NAND_CTL_CLRALE: - NS_DBG("ns_hwcontrol: stop address latch cycles\n"); - ns->lines.ale = 0; - break; - - /* set WP line high */ - case NAND_CTL_SETWP: - NS_DBG("ns_hwcontrol: enable write protection\n"); - ns->lines.wp = 1; - break; - - /* set WP line low */ - case NAND_CTL_CLRWP: - NS_DBG("ns_hwcontrol: disable write protection\n"); - ns->lines.wp = 0; - break; - - /* set CE line low */ - case NAND_CTL_SETNCE: - NS_DBG("ns_hwcontrol: enable chip\n"); - ns->lines.ce = 1; - break; - - /* set CE line high */ - case NAND_CTL_CLRNCE: - NS_DBG("ns_hwcontrol: disable chip\n"); - ns->lines.ce = 0; - break; - - default: - NS_ERR("hwcontrol: unknown command\n"); - } - - return; -} - static u_char ns_nand_read_byte(struct mtd_info *mtd) { @@ -1359,6 +1297,18 @@ ns_nand_write_byte(struct mtd_info *mtd, u_char byte) return; } +static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask) +{ + struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv; + + ns->lines.cle = bitmask & NAND_CLE ? 1 : 0; + ns->lines.ale = bitmask & NAND_ALE ? 1 : 0; + ns->lines.ce = bitmask & NAND_NCE ? 1 : 0; + + if (cmd != NAND_CMD_NONE) + ns_nand_write_byte(mtd, cmd); +} + static int ns_device_ready(struct mtd_info *mtd) { @@ -1514,7 +1464,7 @@ static int __init ns_init_module(void) /* * Register simulator's callbacks. */ - chip->hwcontrol = ns_hwcontrol; + chip->cmd_ctrl = ns_hwcontrol; chip->read_byte = ns_nand_read_byte; chip->dev_ready = ns_device_ready; chip->write_byte = ns_nand_write_byte; diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index e2dc81d..481541a 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -60,22 +60,17 @@ static void ndfc_select_chip(struct mtd_info *mtd, int chip) writel(ccr, ndfc->ndfcbase + NDFC_CCR); } -static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd) +static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct ndfc_controller *ndfc = &ndfc_ctrl; struct nand_chip *chip = mtd->priv; - switch (cmd) { - case NAND_CTL_SETCLE: - chip->IO_ADDR_W = ndfc->ndfcbase + NDFC_CMD; - break; - case NAND_CTL_SETALE: - chip->IO_ADDR_W = ndfc->ndfcbase + NDFC_ALE; - break; - default: - chip->IO_ADDR_W = ndfc->ndfcbase + NDFC_DATA; - break; - } + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writel(cmd & 0xFF, chip->IO_ADDR_W + NDFC_CMD); + else + writel(cmd & 0xFF, chip->IO_ADDR_W + NDFC_ALE); } static int ndfc_ready(struct mtd_info *mtd) @@ -158,7 +153,7 @@ static void ndfc_chip_init(struct ndfc_nand_mtd *mtd) chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA; chip->IO_ADDR_W = ndfc->ndfcbase + NDFC_DATA; - chip->hwcontrol = ndfc_hwcontrol; + chip->cmd_ctrl = ndfc_hwcontrol; chip->dev_ready = ndfc_ready; chip->select_chip = ndfc_select_chip; chip->chip_delay = 50; diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c index 9fab099..22fa65c 100644 --- a/drivers/mtd/nand/ppchameleonevb.c +++ b/drivers/mtd/nand/ppchameleonevb.c @@ -108,54 +108,68 @@ extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partitio /* * hardware specific access to control-lines */ -static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd) +static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd, + unsigned int ctrl) { - switch (cmd) { - - case NAND_CTL_SETCLE: - MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_CLRCLE: - MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_SETALE: - MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_CLRALE: - MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_SETNCE: - MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR); - break; - case NAND_CTL_CLRNCE: - MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR); - break; + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { +#error Missing headerfiles. No way to fix this. -tglx + switch (cmd) { + case NAND_CTL_SETCLE: + MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR); + break; + case NAND_CTL_CLRCLE: + MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR); + break; + case NAND_CTL_SETALE: + MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR); + break; + case NAND_CTL_CLRALE: + MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR); + break; + case NAND_CTL_SETNCE: + MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR); + break; + case NAND_CTL_CLRNCE: + MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR); + break; + } } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } -static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd) +static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd, + unsigned int ctrl) { - switch (cmd) { - - case NAND_CTL_SETCLE: - MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_CLRCLE: - MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_SETALE: - MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_CLRALE: - MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_SETNCE: - MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR); - break; - case NAND_CTL_CLRNCE: - MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR); - break; + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { +#error Missing headerfiles. No way to fix this. -tglx + switch (cmd) { + case NAND_CTL_SETCLE: + MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_CLRCLE: + MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_SETALE: + MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_CLRALE: + MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_SETNCE: + MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR); + break; + case NAND_CTL_CLRNCE: + MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR); + break; + } } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } #ifdef USE_READY_BUSY_PIN @@ -251,7 +265,7 @@ static int __init ppchameleonevb_init(void) /* insert callbacks */ this->IO_ADDR_R = ppchameleon_fio_base; this->IO_ADDR_W = ppchameleon_fio_base; - this->hwcontrol = ppchameleon_hwcontrol; + this->cmd_ctrl = ppchameleon_hwcontrol; #ifdef USE_READY_BUSY_PIN this->dev_ready = ppchameleon_device_ready; #endif @@ -351,7 +365,7 @@ static int __init ppchameleonevb_init(void) /* insert callbacks */ this->IO_ADDR_R = ppchameleonevb_fio_base; this->IO_ADDR_W = ppchameleonevb_fio_base; - this->hwcontrol = ppchameleonevb_hwcontrol; + this->cmd_ctrl = ppchameleonevb_hwcontrol; #ifdef USE_READY_BUSY_PIN this->dev_ready = ppchameleonevb_device_ready; #endif diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c index f8e631c..6c97bfa 100644 --- a/drivers/mtd/nand/rtc_from4.c +++ b/drivers/mtd/nand/rtc_from4.c @@ -208,32 +208,18 @@ static uint8_t revbits[256] = { * Address lines (A24-A22), so no action is required here. * */ -static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd) +static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { - struct nand_chip *this = (struct nand_chip *)(mtd->priv); + struct nand_chip *chip = (mtd->priv); - switch (cmd) { + if (cmd == NAND_CMD_NONE) + return; - case NAND_CTL_SETCLE: - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_CLE); - break; - case NAND_CTL_CLRCLE: - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_CLE); - break; - - case NAND_CTL_SETALE: - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_ALE); - break; - case NAND_CTL_CLRALE: - this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_ALE); - break; - - case NAND_CTL_SETNCE: - break; - case NAND_CTL_CLRNCE: - break; - - } + if (ctrl & NAND_CLE) + writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_CLE); + else + writeb(cmd, chip->IO_ADDR_W | RTC_FROM4_ALE); } /* @@ -559,7 +545,7 @@ static int __init rtc_from4_init(void) this->IO_ADDR_R = rtc_from4_fio_base; this->IO_ADDR_W = rtc_from4_fio_base; /* Set address of hardware control function */ - this->hwcontrol = rtc_from4_hwcontrol; + this->cmd_ctrl = rtc_from4_hwcontrol; /* Set address of chip select function */ this->select_chip = rtc_from4_nand_select_chip; /* command delay time (in us) */ diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 608340a..215227d 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -256,60 +256,36 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) * */ -static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd) +static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigend int ctrl) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); struct nand_chip *chip = mtd->priv; - switch (cmd) { - case NAND_CTL_SETNCE: - case NAND_CTL_CLRNCE: - printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__); - break; - - case NAND_CTL_SETCLE: - chip->IO_ADDR_W = info->regs + S3C2410_NFCMD; - break; - - case NAND_CTL_SETALE: - chip->IO_ADDR_W = info->regs + S3C2410_NFADDR; - break; - - /* NAND_CTL_CLRCLE: */ - /* NAND_CTL_CLRALE: */ - default: - chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; - break; - } + if (cmd == NAND_CMD_NONE) + return; + + if (cmd & NAND_CLE) + writeb(cmd, info->regs + S3C2410_NFCMD); + else + writeb(cmd, info->regs + S3C2410_NFADDR); } /* command and control functions */ -static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd) +static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigend int ctrl) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); struct nand_chip *chip = mtd->priv; - switch (cmd) { - case NAND_CTL_SETNCE: - case NAND_CTL_CLRNCE: - printk(KERN_ERR "%s: called for NCE\n", __FUNCTION__); - break; - - case NAND_CTL_SETCLE: - chip->IO_ADDR_W = info->regs + S3C2440_NFCMD; - break; - - case NAND_CTL_SETALE: - chip->IO_ADDR_W = info->regs + S3C2440_NFADDR; - break; - - /* NAND_CTL_CLRCLE: */ - /* NAND_CTL_CLRALE: */ - default: - chip->IO_ADDR_W = info->regs + S3C2440_NFDATA; - break; - } + if (cmd == NAND_CMD_NONE) + return; + + if (cmd & NAND_CLE) + writeb(cmd, info->regs + S3C2440_NFCMD); + else + writeb(cmd, info->regs + S3C2440_NFADDR); } /* s3c2410_nand_devready() @@ -498,7 +474,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, chip->IO_ADDR_R = info->regs + S3C2410_NFDATA; chip->IO_ADDR_W = info->regs + S3C2410_NFDATA; - chip->hwcontrol = s3c2410_nand_hwcontrol; + chip->cmd_ctrl = s3c2410_nand_hwcontrol; chip->dev_ready = s3c2410_nand_devready; chip->write_buf = s3c2410_nand_write_buf; chip->read_buf = s3c2410_nand_read_buf; @@ -511,7 +487,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, if (info->is_s3c2440) { chip->IO_ADDR_R = info->regs + S3C2440_NFDATA; chip->IO_ADDR_W = info->regs + S3C2440_NFDATA; - chip->hwcontrol = s3c2440_nand_hwcontrol; + chip->cmd_ctrl = s3c2440_nand_hwcontrol; } nmtd->info = info; diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index 5554d0b..45a1da7 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -77,31 +77,26 @@ static struct mtd_partition sharpsl_nand_default_partition_info[] = { /* * hardware specific access to control-lines + * ctrl: + * NAND_CNE: bit 0 -> bit 0 & 4 + * NAND_CLE: bit 1 -> bit 1 + * NAND_ALE: bit 2 -> bit 2 + * */ -static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd) +static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { - switch (cmd) { - case NAND_CTL_SETCLE: - writeb(readb(FLASHCTL) | FLCLE, FLASHCTL); - break; - case NAND_CTL_CLRCLE: - writeb(readb(FLASHCTL) & ~FLCLE, FLASHCTL); - break; - - case NAND_CTL_SETALE: - writeb(readb(FLASHCTL) | FLALE, FLASHCTL); - break; - case NAND_CTL_CLRALE: - writeb(readb(FLASHCTL) & ~FLALE, FLASHCTL); - break; - - case NAND_CTL_SETNCE: - writeb(readb(FLASHCTL) & ~(FLCE0 | FLCE1), FLASHCTL); - break; - case NAND_CTL_CLRNCE: - writeb(readb(FLASHCTL) | (FLCE0 | FLCE1), FLASHCTL); - break; + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned char bits = ctrl & 0x07; + + bits |= (ctrl & 0x01) << 4; + writeb((readb(FLASHCTL) & 0x17) | bits, FLASHCTL); } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; @@ -196,7 +191,7 @@ static int __init sharpsl_nand_init(void) this->IO_ADDR_R = FLASHIO; this->IO_ADDR_W = FLASHIO; /* Set address of hardware control function */ - this->hwcontrol = sharpsl_nand_hwcontrol; + this->cmd_ctrl = sharpsl_nand_hwcontrol; this->dev_ready = sharpsl_nand_dev_ready; /* 15 us command delay time */ this->chip_delay = 15; diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c index 9737f1d..1f6d429 100644 --- a/drivers/mtd/nand/spia.c +++ b/drivers/mtd/nand/spia.c @@ -82,20 +82,27 @@ static const struct mtd_partition partition_info[] = { /* * hardware specific access to control-lines -*/ + * + * ctrl: + * NAND_CNE: bit 0 -> bit 2 + * NAND_CLE: bit 1 -> bit 0 + * NAND_ALE: bit 2 -> bit 1 + */ static void spia_hwcontrol(struct mtd_info *mtd, int cmd) { - switch (cmd) { + struct nand_chip *chip = mtd->priv; - case NAND_CTL_SETCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x01; break; - case NAND_CTL_CLRCLE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x01; break; + if (ctrl & NAND_CTRL_CHANGE) { + void __iomem *addr = spia_io_base + spia_pedr; + unsigned char bits; - case NAND_CTL_SETALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x02; break; - case NAND_CTL_CLRALE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x02; break; - - case NAND_CTL_SETNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) &= ~0x04; break; - case NAND_CTL_CLRNCE: (*(volatile unsigned char *) (spia_io_base + spia_pedr)) |= 0x04; break; + bits = (ctrl & NAND_CNE) << 2; + bits |= (ctrl & NAND_CLE | NAND_ALE) >> 1; + writeb((readb(addr) & ~0x7) | bits, addr); } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } /* @@ -133,7 +140,7 @@ static int __init spia_init(void) this->IO_ADDR_R = (void __iomem *)spia_fio_base; this->IO_ADDR_W = (void __iomem *)spia_fio_base; /* Set address of hardware control function */ - this->hwcontrol = spia_hwcontrol; + this->cmd_ctrl = spia_hwcontrol; /* 15 us command delay time */ this->chip_delay = 15; diff --git a/drivers/mtd/nand/toto.c b/drivers/mtd/nand/toto.c index 50aa6a4..a9cf019 100644 --- a/drivers/mtd/nand/toto.c +++ b/drivers/mtd/nand/toto.c @@ -32,6 +32,8 @@ #include #include +#define CONFIG_NAND_WORKAROUND 1 + /* * MTD structure for TOTO board */ @@ -39,25 +41,6 @@ static struct mtd_info *toto_mtd = NULL; static unsigned long toto_io_base = OMAP_FLASH_1_BASE; -#define CONFIG_NAND_WORKAROUND 1 - -#define NAND_NCE 0x4000 -#define NAND_CLE 0x1000 -#define NAND_ALE 0x0002 -#define NAND_MASK (NAND_CLE | NAND_ALE | NAND_NCE) - -#define T_NAND_CTL_CLRALE(iob) gpiosetout(NAND_ALE, 0) -#define T_NAND_CTL_SETALE(iob) gpiosetout(NAND_ALE, NAND_ALE) -#ifdef CONFIG_NAND_WORKAROUND /* "some" dev boards busted, blue wired to rts2 :( */ -#define T_NAND_CTL_CLRCLE(iob) gpiosetout(NAND_CLE, 0); rts2setout(2, 2) -#define T_NAND_CTL_SETCLE(iob) gpiosetout(NAND_CLE, NAND_CLE); rts2setout(2, 0) -#else -#define T_NAND_CTL_CLRCLE(iob) gpiosetout(NAND_CLE, 0) -#define T_NAND_CTL_SETCLE(iob) gpiosetout(NAND_CLE, NAND_CLE) -#endif -#define T_NAND_CTL_SETNCE(iob) gpiosetout(NAND_NCE, 0) -#define T_NAND_CTL_CLRNCE(iob) gpiosetout(NAND_NCE, NAND_NCE) - /* * Define partitions for flash devices */ @@ -91,25 +74,43 @@ static struct mtd_partition partition_info32M[] = { #define NUM_PARTITIONS32M 3 #define NUM_PARTITIONS64M 4 + /* * hardware specific access to control-lines -*/ - -static void toto_hwcontrol(struct mtd_info *mtd, int cmd) + * + * ctrl: + * NAND_NCE: bit 0 -> bit 14 (0x4000) + * NAND_CLE: bit 1 -> bit 12 (0x1000) + * NAND_ALE: bit 2 -> bit 1 (0x0002) + */ +static void toto_hwcontrol(struct mtd_info *mtd, int cmd, + unsigned int ctrl) { + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned long bits; - udelay(1); /* hopefully enough time for tc make proceding write to clear */ - switch (cmd) { - case NAND_CTL_SETCLE: T_NAND_CTL_SETCLE(cmd); break; - case NAND_CTL_CLRCLE: T_NAND_CTL_CLRCLE(cmd); break; + /* hopefully enough time for tc make proceding write to clear */ + udelay(1); - case NAND_CTL_SETALE: T_NAND_CTL_SETALE(cmd); break; - case NAND_CTL_CLRALE: T_NAND_CTL_CLRALE(cmd); break; + bits = (~ctrl & NAND_NCE) << 14; + bits |= (ctrl & NAND_CLE) << 12; + bits |= (ctrl & NAND_ALE) >> 1; - case NAND_CTL_SETNCE: T_NAND_CTL_SETNCE(cmd); break; - case NAND_CTL_CLRNCE: T_NAND_CTL_CLRNCE(cmd); break; +#warning Wild guess as gpiosetout() is nowhere defined in the kernel source - tglx + gpiosetout(0x5002, bits); + +#ifdef CONFIG_NAND_WORKAROUND + /* "some" dev boards busted, blue wired to rts2 :( */ + rts2setout(2, (ctrl & NAND_CLE) << 1); +#endif + /* allow time to ensure gpio state to over take memory write */ + udelay(1); } - udelay(1); /* allow time to ensure gpio state to over take memory write */ + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } /* @@ -142,7 +143,7 @@ static int __init toto_init(void) /* Set address of NAND IO lines */ this->IO_ADDR_R = toto_io_base; this->IO_ADDR_W = toto_io_base; - this->hwcontrol = toto_hwcontrol; + this->cmd_ctrl = toto_hwcontrol; this->dev_ready = NULL; /* 25 us command delay time */ this->chip_delay = 30; diff --git a/drivers/mtd/nand/ts7250.c b/drivers/mtd/nand/ts7250.c index 70bce1b..a0b4b1e 100644 --- a/drivers/mtd/nand/ts7250.c +++ b/drivers/mtd/nand/ts7250.c @@ -83,31 +83,29 @@ static struct mtd_partition partition_info128[] = { /* * hardware specific access to control-lines + * + * ctrl: + * NAND_NCE: bit 0 -> bit 2 + * NAND_CLE: bit 1 -> bit 1 + * NAND_ALE: bit 2 -> bit 0 */ -static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd) +static void ts7250_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - unsigned long ctrl = TS72XX_NAND_CONTROL_VIRT_BASE; - - switch (cmd) { - case NAND_CTL_SETCLE: - __raw_writeb(__raw_readb(ctrl) | 0x2, ctrl); - break; - case NAND_CTL_CLRCLE: - __raw_writeb(__raw_readb(ctrl) & ~0x2, ctrl); - break; - case NAND_CTL_SETALE: - __raw_writeb(__raw_readb(ctrl) | 0x1, ctrl); - break; - case NAND_CTL_CLRALE: - __raw_writeb(__raw_readb(ctrl) & ~0x1, ctrl); - break; - case NAND_CTL_SETNCE: - __raw_writeb(__raw_readb(ctrl) | 0x4, ctrl); - break; - case NAND_CTL_CLRNCE: - __raw_writeb(__raw_readb(ctrl) & ~0x4, ctrl); - break; + struct nand_chip *chip = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + unsigned long addr = TS72XX_NAND_CONTROL_VIRT_BASE; + unsigned char bits; + + bits = (ctrl & NAND_CNE) << 2; + bits |= ctrl & NAND_CLE; + bits |= (ctrl & NAND_ALE) >> 2; + + __raw_writeb((__raw_readb(addr) & ~0x7) | bits, addr); } + + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); } /* @@ -152,7 +150,7 @@ static int __init ts7250_init(void) /* insert callbacks */ this->IO_ADDR_R = (void *)TS72XX_NAND_DATA_VIRT_BASE; this->IO_ADDR_W = (void *)TS72XX_NAND_DATA_VIRT_BASE; - this->hwcontrol = ts7250_hwcontrol; + this->cmd_ctrl = ts7250_hwcontrol; this->dev_ready = ts7250_device_ready; this->chip_delay = 15; this->ecc.mode = NAND_ECC_SOFT; -- cgit v1.1