From 61b03bd7c3b55498c6180d43bf71b7bf49114b64 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 7 Nov 2005 11:15:49 +0000 Subject: [MTD] NAND: Clean up trailing white spaces Signed-off-by: Thomas Gleixner --- drivers/mtd/nand/rtc_from4.c | 58 ++++++++++++++++++++++---------------------- 1 file changed, 29 insertions(+), 29 deletions(-) (limited to 'drivers/mtd/nand/rtc_from4.c') diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c index 031051c..3a5841c 100644 --- a/drivers/mtd/nand/rtc_from4.c +++ b/drivers/mtd/nand/rtc_from4.c @@ -2,11 +2,11 @@ * drivers/mtd/nand/rtc_from4.c * * Copyright (C) 2004 Red Hat, Inc. - * + * * Derived from drivers/mtd/nand/spia.c * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * - * $Id: rtc_from4.c,v 1.9 2005/01/24 20:40:11 dmarlin Exp $ + * $Id: rtc_from4.c,v 1.10 2005/11/07 11:14:31 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,8 +14,8 @@ * * Overview: * This is a device driver for the AG-AND flash device found on the - * Renesas Technology Corp. Flash ROM 4-slot interface board (FROM_BOARD4), - * which utilizes the Renesas HN29V1G91T-30 part. + * Renesas Technology Corp. Flash ROM 4-slot interface board (FROM_BOARD4), + * which utilizes the Renesas HN29V1G91T-30 part. * This chip is a 1 GBibit (128MiB x 8 bits) AG-AND flash device. */ @@ -105,9 +105,9 @@ const static struct mtd_partition partition_info[] = { }; #define NUM_PARTITIONS 1 -/* +/* * hardware specific flash bbt decriptors - * Note: this is to allow debugging by disabling + * Note: this is to allow debugging by disabling * NAND_BBT_CREATE and/or NAND_BBT_WRITE * */ @@ -141,7 +141,7 @@ static struct nand_bbt_descr rtc_from4_bbt_mirror_descr = { /* the Reed Solomon control structure */ static struct rs_control *rs_decoder; -/* +/* * hardware specific Out Of Band information */ static struct nand_oobinfo rtc_from4_nand_oobinfo = { @@ -200,38 +200,38 @@ static uint8_t revbits[256] = { -/* +/* * rtc_from4_hwcontrol - hardware specific access to control-lines * @mtd: MTD device structure * @cmd: hardware control command * - * Address lines (A5 and A4) are used to control Command and Address Latch + * Address lines (A5 and A4) are used to control Command and Address Latch * Enable on this board, so set the read/write address appropriately. * - * Chip Enable is also controlled by the Chip Select (CS5) and + * Chip Enable is also controlled by the Chip Select (CS5) and * Address lines (A24-A22), so no action is required here. * */ static void rtc_from4_hwcontrol(struct mtd_info *mtd, int cmd) { struct nand_chip* this = (struct nand_chip *) (mtd->priv); - + switch(cmd) { - - case NAND_CTL_SETCLE: + + case NAND_CTL_SETCLE: this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_CLE); break; - case NAND_CTL_CLRCLE: + case NAND_CTL_CLRCLE: this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_CLE); break; - + case NAND_CTL_SETALE: this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W | RTC_FROM4_ALE); break; case NAND_CTL_CLRALE: this->IO_ADDR_W = (void __iomem *)((unsigned long)this->IO_ADDR_W & ~RTC_FROM4_ALE); break; - + case NAND_CTL_SETNCE: break; case NAND_CTL_CLRNCE: @@ -296,7 +296,7 @@ static int rtc_from4_nand_device_ready(struct mtd_info *mtd) * @mtd: MTD device structure * @chip: Chip to select (0 == slot 3, 1 == slot 4) * - * If there was a sudden loss of power during an erase operation, a + * If there was a sudden loss of power during an erase operation, a * "device recovery" operation must be performed when power is restored * to ensure correct operation. This routine performs the required steps * for the requested chip. @@ -312,7 +312,7 @@ static void deplete(struct mtd_info *mtd, int chip) while (!this->dev_ready(mtd)); this->select_chip(mtd, chip); - + /* Send the commands for device recovery, phase 1 */ this->cmdfunc (mtd, NAND_CMD_DEPLETE1, 0x0000, 0x0000); this->cmdfunc (mtd, NAND_CMD_DEPLETE2, -1, -1); @@ -330,7 +330,7 @@ static void deplete(struct mtd_info *mtd, int chip) * @mtd: MTD device structure * @mode: I/O mode; read or write * - * enable hardware ECC for data read or write + * enable hardware ECC for data read or write * */ static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode) @@ -340,7 +340,7 @@ static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode) switch (mode) { case NAND_ECC_READ : - status = RTC_FROM4_RS_ECC_CTL_CLR + status = RTC_FROM4_RS_ECC_CTL_CLR | RTC_FROM4_RS_ECC_CTL_FD_E; *rs_ecc_ctl = status; @@ -353,8 +353,8 @@ static void rtc_from4_enable_hwecc(struct mtd_info *mtd, int mode) break; case NAND_ECC_WRITE : - status = RTC_FROM4_RS_ECC_CTL_CLR - | RTC_FROM4_RS_ECC_CTL_GEN + status = RTC_FROM4_RS_ECC_CTL_CLR + | RTC_FROM4_RS_ECC_CTL_GEN | RTC_FROM4_RS_ECC_CTL_FD_E; *rs_ecc_ctl = status; @@ -411,7 +411,7 @@ static void rtc_from4_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_c static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_char *ecc1, u_char *ecc2) { int i, j, res; - unsigned short status; + unsigned short status; uint16_t par[6], syn[6]; uint8_t ecc[8]; volatile unsigned short *rs_ecc; @@ -430,7 +430,7 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha } /* convert into 6 10bit syndrome fields */ - par[5] = rs_decoder->index_of[(((uint16_t)ecc[0] >> 0) & 0x0ff) | + par[5] = rs_decoder->index_of[(((uint16_t)ecc[0] >> 0) & 0x0ff) | (((uint16_t)ecc[1] << 8) & 0x300)]; par[4] = rs_decoder->index_of[(((uint16_t)ecc[1] >> 2) & 0x03f) | (((uint16_t)ecc[2] << 6) & 0x3c0)]; @@ -456,7 +456,7 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha /* Let the library code do its magic.*/ res = decode_rs8(rs_decoder, (uint8_t *)buf, par, 512, syn, 0, NULL, 0xff, NULL); if (res > 0) { - DEBUG (MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " + DEBUG (MTD_DEBUG_LEVEL0, "rtc_from4_correct_data: " "ECC corrected %d errors on read\n", res); } return res; @@ -470,9 +470,9 @@ static int rtc_from4_correct_data(struct mtd_info *mtd, const u_char *buf, u_cha * @state: state or the operation * @status: status code returned from read status * @page: startpage inside the chip, must be called with (page & this->pagemask) - * - * Perform additional error status checks on erase and write failures - * to determine if errors are correctable. For this device, correctable + * + * Perform additional error status checks on erase and write failures + * to determine if errors are correctable. For this device, correctable * 1-bit errors on erase and write are considered acceptable. * * note: see pages 34..37 of data sheet for details. @@ -633,7 +633,7 @@ int __init rtc_from4_init (void) #ifdef RTC_FROM4_HWECC /* We could create the decoder on demand, if memory is a concern. - * This way we have it handy, if an error happens + * This way we have it handy, if an error happens * * Symbolsize is 10 (bits) * Primitve polynomial is x^10+x^3+1 -- cgit v1.1