From 9f6e0bff2afb52a4c29f5ca8a4db01810357974e Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 6 May 2015 20:31:19 +0200 Subject: mmc: Add support for disabling write-protect detection It is not uncommon to see systems where there is no physical write-protect signal (e.g. when using eMMC or microSD card slots). For some controllers, which have a dedicated write-protection detection logic (like SDHCI controllers), the get_ro() callback can return bogus data in such a case. Instead of handling this on a per controller basis this patch adds a new capability flag to the MMC core that can be set to specify that the result of get_ro() is invalid. When the flag is set the core will not call get_ro() and assume that the card is always read-write. Signed-off-by: Lars-Peter Clausen Signed-off-by: Ulf Hansson --- drivers/mmc/core/sd.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 31a9ef2..8f6864a 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -804,6 +804,28 @@ int mmc_sd_get_csd(struct mmc_host *host, struct mmc_card *card) return 0; } +static int mmc_sd_get_ro(struct mmc_host *host) +{ + int ro; + + /* + * Some systems don't feature a write-protect pin and don't need one. + * E.g. because they only have micro-SD card slot. For those systems + * assume that the SD card is always read-write. + */ + if (host->caps2 & MMC_CAP2_NO_WRITE_PROTECT) + return 0; + + if (!host->ops->get_ro) + return -1; + + mmc_host_clk_hold(host); + ro = host->ops->get_ro(host); + mmc_host_clk_release(host); + + return ro; +} + int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, bool reinit) { @@ -855,13 +877,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, * Check if read-only switch is active. */ if (!reinit) { - int ro = -1; - - if (host->ops->get_ro) { - mmc_host_clk_hold(card->host); - ro = host->ops->get_ro(host); - mmc_host_clk_release(card->host); - } + int ro = mmc_sd_get_ro(host); if (ro < 0) { pr_warn("%s: host does not support reading read-only switch, assuming write-enable\n", -- cgit v1.1