From 2bf22b39823c1d173dda31111a4eb2ce36daaf39 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Thu, 6 Oct 2011 14:50:33 -0600 Subject: mmc: core: add workaround for controllers with broken multiblock reads Due to hardware bugs, some MMC host controllers don't support multiple-block reads[1]. To resolve, add a new MMC capability flag, MMC_CAP2_NO_MULTI_READ, which can be set by affected host controller drivers. When this capability is set, all reads will be issued one sector at a time. 1. See for example Advisory 2.1.1.128 "MMC: Multiple Block Read Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ Revision F (October 2010) (SPRZ278F), available from http://focus.ti.com/lit/er/sprz278f/sprz278f.pdf Signed-off-by: Paul Walmsley Cc: Dave Hylands Tested-by: Steve Sakoman Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index c0cb225..a1cb21f 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1030,13 +1030,20 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, if (brq->data.blocks > card->host->max_blk_count) brq->data.blocks = card->host->max_blk_count; - /* - * After a read error, we redo the request one sector at a time - * in order to accurately determine which sectors can be read - * successfully. - */ - if (disable_multi && brq->data.blocks > 1) - brq->data.blocks = 1; + if (brq->data.blocks > 1) { + /* + * After a read error, we redo the request one sector + * at a time in order to accurately determine which + * sectors can be read successfully. + */ + if (disable_multi) + brq->data.blocks = 1; + + /* Some controllers can't do multiblock reads due to hw bugs */ + if (card->host->caps2 & MMC_CAP2_NO_MULTI_READ && + rq_data_dir(req) == READ) + brq->data.blocks = 1; + } if (brq->data.blocks > 1 || do_rel_wr) { /* SPI multiblock writes terminate using a special -- cgit v1.1