From af7e9069543aabd415d7c543f3f89b143ac1a932 Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Mon, 6 Oct 2014 21:17:14 -0700 Subject: mfd: axp20x: Extend axp20x to support axp288 pmic X-Powers AXP288 is a customized PMIC for Intel Baytrail-CR platforms. Similar to AXP202/209, AXP288 comes with USB charger, more LDO and BUCK channels, and AD converters. It also provides extended status and interrupt reporting capabilities than the devices currently supported in axp20x.c. In addition to feature extension, this patch also adds ACPI binding for enumeration. This consolidated driver should support more X-Powers' PMICs in both device tree and ACPI enumerated platforms. Signed-off-by: Jacob Pan Reviewed-by: Maxime Ripard Reviewed-by: Jonathan Cameron Signed-off-by: Lee Jones --- drivers/mfd/Kconfig | 3 +- drivers/mfd/axp20x.c | 361 +++++++++++++++++++++++++++++++++++++++++++-------- 2 files changed, 308 insertions(+), 56 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index de5abf2..c183edb 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -74,7 +74,8 @@ config MFD_AXP20X select REGMAP_IRQ depends on I2C=y help - If you say Y here you get support for the X-Powers AXP202 and AXP209. + If you say Y here you get support for the X-Powers AXP202, AXP209 and + AXP288 power management IC (PMIC). This driver include only the core APIs. You have to select individual components like regulators or the PEK (Power Enable Key) under the corresponding menus. diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index dee6539..b2fb7f4 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -1,9 +1,9 @@ /* - * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209 + * axp20x.c - MFD core driver for the X-Powers' Power Management ICs * - * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC - * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature - * as well as 4 configurable GPIOs. + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature + * as well as configurable GPIOs. * * Author: Carlo Caione * @@ -25,9 +25,16 @@ #include #include #include +#include #define AXP20X_OFF 0x80 +static const char const *axp20x_model_names[] = { + "AXP202", + "AXP209", + "AXP288", +}; + static const struct regmap_range axp20x_writeable_ranges[] = { regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), @@ -47,6 +54,25 @@ static const struct regmap_access_table axp20x_volatile_table = { .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges), }; +static const struct regmap_range axp288_writeable_ranges[] = { + regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), + regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), +}; + +static const struct regmap_range axp288_volatile_ranges[] = { + regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L), +}; + +static const struct regmap_access_table axp288_writeable_table = { + .yes_ranges = axp288_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges), +}; + +static const struct regmap_access_table axp288_volatile_table = { + .yes_ranges = axp288_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges), +}; + static struct resource axp20x_pek_resources[] = { { .name = "PEK_DBR", @@ -61,6 +87,39 @@ static struct resource axp20x_pek_resources[] = { }, }; +static struct resource axp288_battery_resources[] = { + { + .start = AXP288_IRQ_QWBTU, + .end = AXP288_IRQ_QWBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WBTU, + .end = AXP288_IRQ_WBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_QWBTO, + .end = AXP288_IRQ_QWBTO, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WBTO, + .end = AXP288_IRQ_WBTO, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WL2, + .end = AXP288_IRQ_WL2, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_WL1, + .end = AXP288_IRQ_WL1, + .flags = IORESOURCE_IRQ, + }, +}; + static const struct regmap_config axp20x_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -70,47 +129,96 @@ static const struct regmap_config axp20x_regmap_config = { .cache_type = REGCACHE_RBTREE, }; -#define AXP20X_IRQ(_irq, _off, _mask) \ - [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } +static const struct regmap_config axp288_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .wr_table = &axp288_writeable_table, + .volatile_table = &axp288_volatile_table, + .max_register = AXP288_FG_TUNE5, + .cache_type = REGCACHE_RBTREE, +}; + +#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \ + [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } static const struct regmap_irq axp20x_regmap_irqs[] = { - AXP20X_IRQ(ACIN_OVER_V, 0, 7), - AXP20X_IRQ(ACIN_PLUGIN, 0, 6), - AXP20X_IRQ(ACIN_REMOVAL, 0, 5), - AXP20X_IRQ(VBUS_OVER_V, 0, 4), - AXP20X_IRQ(VBUS_PLUGIN, 0, 3), - AXP20X_IRQ(VBUS_REMOVAL, 0, 2), - AXP20X_IRQ(VBUS_V_LOW, 0, 1), - AXP20X_IRQ(BATT_PLUGIN, 1, 7), - AXP20X_IRQ(BATT_REMOVAL, 1, 6), - AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5), - AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4), - AXP20X_IRQ(CHARG, 1, 3), - AXP20X_IRQ(CHARG_DONE, 1, 2), - AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1), - AXP20X_IRQ(BATT_TEMP_LOW, 1, 0), - AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7), - AXP20X_IRQ(CHARG_I_LOW, 2, 6), - AXP20X_IRQ(DCDC1_V_LONG, 2, 5), - AXP20X_IRQ(DCDC2_V_LONG, 2, 4), - AXP20X_IRQ(DCDC3_V_LONG, 2, 3), - AXP20X_IRQ(PEK_SHORT, 2, 1), - AXP20X_IRQ(PEK_LONG, 2, 0), - AXP20X_IRQ(N_OE_PWR_ON, 3, 7), - AXP20X_IRQ(N_OE_PWR_OFF, 3, 6), - AXP20X_IRQ(VBUS_VALID, 3, 5), - AXP20X_IRQ(VBUS_NOT_VALID, 3, 4), - AXP20X_IRQ(VBUS_SESS_VALID, 3, 3), - AXP20X_IRQ(VBUS_SESS_END, 3, 2), - AXP20X_IRQ(LOW_PWR_LVL1, 3, 1), - AXP20X_IRQ(LOW_PWR_LVL2, 3, 0), - AXP20X_IRQ(TIMER, 4, 7), - AXP20X_IRQ(PEK_RIS_EDGE, 4, 6), - AXP20X_IRQ(PEK_FAL_EDGE, 4, 5), - AXP20X_IRQ(GPIO3_INPUT, 4, 3), - AXP20X_IRQ(GPIO2_INPUT, 4, 2), - AXP20X_IRQ(GPIO1_INPUT, 4, 1), - AXP20X_IRQ(GPIO0_INPUT, 4, 0), + INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7), + INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6), + INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5), + INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), + INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), + INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), + INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1), + INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), + INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), + INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5), + INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4), + INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), + INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1), + INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0), + INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7), + INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6), + INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5), + INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4), + INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3), + INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1), + INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0), + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7), + INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6), + INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5), + INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4), + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3), + INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2), + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1), + INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0), + INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), + INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6), + INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5), + INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3), + INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2), + INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1), + INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0), +}; + +/* some IRQs are compatible with axp20x models */ +static const struct regmap_irq axp288_regmap_irqs[] = { + INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), + INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), + INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), + + INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), + INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), + INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4), + INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5), + INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), + INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), + + INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0), + INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1), + INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2), + INIT_REGMAP_IRQ(AXP288, WBTU, 2, 3), + INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4), + INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5), + INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6), + INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7), + + INIT_REGMAP_IRQ(AXP288, WL2, 3, 0), + INIT_REGMAP_IRQ(AXP288, WL1, 3, 1), + INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2), + INIT_REGMAP_IRQ(AXP288, OT, 3, 7), + + INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0), + INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1), + INIT_REGMAP_IRQ(AXP288, POKO, 4, 2), + INIT_REGMAP_IRQ(AXP288, POKL, 4, 3), + INIT_REGMAP_IRQ(AXP288, POKS, 4, 4), + INIT_REGMAP_IRQ(AXP288, POKN, 4, 5), + INIT_REGMAP_IRQ(AXP288, POKP, 4, 6), + INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), + + INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0), + INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), }; static const struct of_device_id axp20x_of_match[] = { @@ -128,16 +236,39 @@ static const struct i2c_device_id axp20x_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id); +static struct acpi_device_id axp20x_acpi_match[] = { + { + .id = "INT33F4", + .driver_data = AXP288_ID, + }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match); + static const struct regmap_irq_chip axp20x_regmap_irq_chip = { .name = "axp20x_irq_chip", .status_base = AXP20X_IRQ1_STATE, .ack_base = AXP20X_IRQ1_STATE, .mask_base = AXP20X_IRQ1_EN, - .num_regs = 5, + .mask_invert = true, + .init_ack_masked = true, .irqs = axp20x_regmap_irqs, .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs), + .num_regs = 5, + +}; + +static const struct regmap_irq_chip axp288_regmap_irq_chip = { + .name = "axp288_irq_chip", + .status_base = AXP20X_IRQ1_STATE, + .ack_base = AXP20X_IRQ1_STATE, + .mask_base = AXP20X_IRQ1_EN, .mask_invert = true, .init_ack_masked = true, + .irqs = axp288_regmap_irqs, + .num_irqs = ARRAY_SIZE(axp288_regmap_irqs), + .num_regs = 6, + }; static const char * const axp20x_supplies[] = { @@ -161,36 +292,155 @@ static struct mfd_cell axp20x_cells[] = { }, }; +static struct resource axp288_adc_resources[] = { + { + .name = "GPADC", + .start = AXP288_IRQ_GPADC, + .end = AXP288_IRQ_GPADC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource axp288_charger_resources[] = { + { + .start = AXP288_IRQ_OV, + .end = AXP288_IRQ_OV, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_DONE, + .end = AXP288_IRQ_DONE, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_CHARGING, + .end = AXP288_IRQ_CHARGING, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_SAFE_QUIT, + .end = AXP288_IRQ_SAFE_QUIT, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_SAFE_ENTER, + .end = AXP288_IRQ_SAFE_ENTER, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_QCBTU, + .end = AXP288_IRQ_QCBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_CBTU, + .end = AXP288_IRQ_CBTU, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_QCBTO, + .end = AXP288_IRQ_QCBTO, + .flags = IORESOURCE_IRQ, + }, + { + .start = AXP288_IRQ_CBTO, + .end = AXP288_IRQ_CBTO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell axp288_cells[] = { + { + .name = "axp288_adc", + .num_resources = ARRAY_SIZE(axp288_adc_resources), + .resources = axp288_adc_resources, + }, + { + .name = "axp288_charger", + .num_resources = ARRAY_SIZE(axp288_charger_resources), + .resources = axp288_charger_resources, + }, + { + .name = "axp288_battery", + .num_resources = ARRAY_SIZE(axp288_battery_resources), + .resources = axp288_battery_resources, + }, +}; + static struct axp20x_dev *axp20x_pm_power_off; static void axp20x_power_off(void) { + if (axp20x_pm_power_off->variant == AXP288_ID) + return; + regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL, AXP20X_OFF); } +static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev) +{ + const struct acpi_device_id *acpi_id; + const struct of_device_id *of_id; + + if (dev->of_node) { + of_id = of_match_device(axp20x_of_match, dev); + if (!of_id) { + dev_err(dev, "Unable to match OF ID\n"); + return -ENODEV; + } + axp20x->variant = (long) of_id->data; + } else { + acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); + if (!acpi_id || !acpi_id->driver_data) { + dev_err(dev, "Unable to match ACPI ID and data\n"); + return -ENODEV; + } + axp20x->variant = (long) acpi_id->driver_data; + } + + switch (axp20x->variant) { + case AXP202_ID: + case AXP209_ID: + axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); + axp20x->cells = axp20x_cells; + axp20x->regmap_cfg = &axp20x_regmap_config; + axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; + break; + case AXP288_ID: + axp20x->cells = axp288_cells; + axp20x->nr_cells = ARRAY_SIZE(axp288_cells); + axp20x->regmap_cfg = &axp288_regmap_config; + axp20x->regmap_irq_chip = &axp288_regmap_irq_chip; + break; + default: + dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant); + return -EINVAL; + } + dev_info(dev, "AXP20x variant %s found\n", + axp20x_model_names[axp20x->variant]); + + return 0; +} + static int axp20x_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct axp20x_dev *axp20x; - const struct of_device_id *of_id; int ret; axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL); if (!axp20x) return -ENOMEM; - of_id = of_match_device(axp20x_of_match, &i2c->dev); - if (!of_id) { - dev_err(&i2c->dev, "Unable to setup AXP20X data\n"); - return -ENODEV; - } - axp20x->variant = (long) of_id->data; + ret = axp20x_match_device(axp20x, &i2c->dev); + if (ret) + return ret; axp20x->i2c_client = i2c; axp20x->dev = &i2c->dev; dev_set_drvdata(axp20x->dev, axp20x); - axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config); + axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg); if (IS_ERR(axp20x->regmap)) { ret = PTR_ERR(axp20x->regmap); dev_err(&i2c->dev, "regmap init failed: %d\n", ret); @@ -199,15 +449,15 @@ static int axp20x_i2c_probe(struct i2c_client *i2c, ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq, IRQF_ONESHOT | IRQF_SHARED, -1, - &axp20x_regmap_irq_chip, + axp20x->regmap_irq_chip, &axp20x->regmap_irqc); if (ret) { dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret); return ret; } - ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells, - ARRAY_SIZE(axp20x_cells), NULL, 0, NULL); + ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells, + axp20x->nr_cells, NULL, 0, NULL); if (ret) { dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret); @@ -245,6 +495,7 @@ static struct i2c_driver axp20x_i2c_driver = { .name = "axp20x", .owner = THIS_MODULE, .of_match_table = of_match_ptr(axp20x_of_match), + .acpi_match_table = ACPI_PTR(axp20x_acpi_match), }, .probe = axp20x_i2c_probe, .remove = axp20x_i2c_remove, -- cgit v1.1 From ff3bbc5c637ab0843b3a9df717b6cca4e8243f0c Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Tue, 11 Nov 2014 11:30:09 -0800 Subject: mfd/axp20x: avoid irq numbering collision IRQ numbers in axp20x devices are defined with high-order bit first in each IRQ enable/status registers. On Intel platforms it is more common to number IRQs with least significant bit first. Therefore, sharing IRQ# between the two is very difficult. Since AXP288 is a customized PMIC for Intel platform and the amount of shared IRQs are very small, we use separate IRQ numbering. This also fixes collision and a duplicate in WBTO interrupt. e.g. For the 16 interrupts controlled in IRQ enabled registers 1 & 2, on axp20x for ARM, the PMIC local IRQ numbers and register bits are mapped as: IRQ#: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 --------------------------------------------------------- ARM: 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 Intel: 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 Signed-off-by: Todd Brandt Signed-off-by: Jacob Pan Acked-by: Jonathan Cameron Signed-off-by: Lee Jones --- drivers/mfd/axp20x.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers/mfd') diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index b2fb7f4..9c4714e 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -183,21 +183,21 @@ static const struct regmap_irq axp20x_regmap_irqs[] = { /* some IRQs are compatible with axp20x models */ static const struct regmap_irq axp288_regmap_irqs[] = { - INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2), - INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3), - INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4), + INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2), + INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3), + INIT_REGMAP_IRQ(AXP288, OV, 0, 4), - INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2), - INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3), + INIT_REGMAP_IRQ(AXP288, DONE, 1, 2), + INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3), INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4), INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5), - INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6), - INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7), + INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6), + INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7), INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0), INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1), INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2), - INIT_REGMAP_IRQ(AXP288, WBTU, 2, 3), + INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3), INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4), INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5), INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6), @@ -215,7 +215,7 @@ static const struct regmap_irq axp288_regmap_irqs[] = { INIT_REGMAP_IRQ(AXP288, POKS, 4, 4), INIT_REGMAP_IRQ(AXP288, POKN, 4, 5), INIT_REGMAP_IRQ(AXP288, POKP, 4, 6), - INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7), + INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7), INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0), INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1), -- cgit v1.1