From db71b7df76dab261cc9f27525765211bd58345b1 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Sat, 28 Apr 2007 20:08:33 -0300 Subject: V4L/DVB (5574): Pvrusb2: Improve handling of PAL-60 video standard This patch originated with Servaas Vandenberghe and has been further developed a bit (to preserve saa7115 behavior). These changes allow for correct operation of PAL-60 video (Servaas tested this against a PAL-B/G tuner with the video standard overridden as a module option). Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pvrusb2/pvrusb2-encoder.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/media') diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index 5669c8c..20b6144 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -391,22 +391,29 @@ static int pvr2_encoder_prep_config(struct pvr2_hdw *hdw) int pvr2_encoder_configure(struct pvr2_hdw *hdw) { int ret; + int val; pvr2_trace(PVR2_TRACE_ENCODER,"pvr2_encoder_configure" " (cx2341x module)"); hdw->enc_ctl_state.port = CX2341X_PORT_STREAMING; hdw->enc_ctl_state.width = hdw->res_hor_val; hdw->enc_ctl_state.height = hdw->res_ver_val; - hdw->enc_ctl_state.is_50hz = ((hdw->std_mask_cur & - (V4L2_STD_NTSC|V4L2_STD_PAL_M)) ? + hdw->enc_ctl_state.is_50hz = ((hdw->std_mask_cur & V4L2_STD_525_60) ? 0 : 1); ret = 0; ret |= pvr2_encoder_prep_config(hdw); + /* saa7115: 0xf0 */ + val = 0xf0; + if (hdw->hdw_type == PVR2_HDW_TYPE_24XXX) { + /* ivtv cx25840: 0x140 */ + val = 0x140; + } + if (!ret) ret = pvr2_encoder_vcmd( hdw,CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, - 0xf0, 0xf0); + val, val); /* setup firmware to notify us about some events (don't know why...) */ if (!ret) ret = pvr2_encoder_vcmd( -- cgit v1.1