From 9f6933be665ce3b049c274c99810ac754edabf19 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 25 Mar 2006 09:05:39 -0300 Subject: V4L/DVB (3599a): Move drivers/usb/media to drivers/media/video Because of historic reasons, there are two separate directories with V4L stuff. Most drivers are located at driver/media/video. However, some code for USB Webcams were inserted under drivers/usb/media. This makes difficult for module authors to know were things should be. Also, makes Kconfig menu confusing for normal users. This patch moves all V4L content under drivers/usb/media to drivers/media/video, and fixes Kconfig/Makefile entries. Signed-off-by: Greg Kroah-Hartman Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sn9c102/sn9c102_sensor.h | 389 +++++++++++++++++++++++++++ 1 file changed, 389 insertions(+) create mode 100644 drivers/media/video/sn9c102/sn9c102_sensor.h (limited to 'drivers/media/video/sn9c102/sn9c102_sensor.h') diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h new file mode 100644 index 0000000..2afd9e9 --- /dev/null +++ b/drivers/media/video/sn9c102/sn9c102_sensor.h @@ -0,0 +1,389 @@ +/*************************************************************************** + * API for image sensors connected to the SN9C10x PC Camera Controllers * + * * + * Copyright (C) 2004-2006 by Luca Risolia * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the Free Software * + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * + ***************************************************************************/ + +#ifndef _SN9C102_SENSOR_H_ +#define _SN9C102_SENSOR_H_ + +#include +#include +#include +#include +#include +#include + +struct sn9c102_device; +struct sn9c102_sensor; + +/*****************************************************************************/ + +/* + OVERVIEW. + This is a small interface that allows you to add support for any CCD/CMOS + image sensors connected to the SN9C10X bridges. The entire API is documented + below. In the most general case, to support a sensor there are three steps + you have to follow: + 1) define the main "sn9c102_sensor" structure by setting the basic fields; + 2) write a probing function to be called by the core module when the USB + camera is recognized, then add both the USB ids and the name of that + function to the two corresponding tables SENSOR_TABLE and ID_TABLE (see + below); + 3) implement the methods that you want/need (and fill the rest of the main + structure accordingly). + "sn9c102_pas106b.c" is an example of all this stuff. Remember that you do + NOT need to touch the source code of the core module for the things to work + properly, unless you find bugs or flaws in it. Finally, do not forget to + read the V4L2 API for completeness. +*/ + +/*****************************************************************************/ + +/* + Probing functions: on success, you must attach the sensor to the camera + by calling sn9c102_attach_sensor() provided below. + To enable the I2C communication, you might need to perform a really basic + initialization of the SN9C10X chip by using the write function declared + ahead. + Functions must return 0 on success, the appropriate error otherwise. +*/ +extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam); +extern int sn9c102_probe_mi0343(struct sn9c102_device* cam); +extern int sn9c102_probe_ov7630(struct sn9c102_device* cam); +extern int sn9c102_probe_pas106b(struct sn9c102_device* cam); +extern int sn9c102_probe_pas202bca(struct sn9c102_device* cam); +extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam); +extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam); +extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam); + +/* + Add the above entries to this table. Be sure to add the entry in the right + place, since, on failure, the next probing routine is called according to + the order of the list below, from top to bottom. +*/ +#define SN9C102_SENSOR_TABLE \ +static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = { \ + &sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */ \ + &sn9c102_probe_pas202bca, /* detection mostly based on USB pid/vid */ \ + &sn9c102_probe_ov7630, /* detection mostly based on USB pid/vid */ \ + &sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */ \ + &sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */ \ + NULL, \ +}; + +/* Device identification */ +extern struct sn9c102_device* +sn9c102_match_id(struct sn9c102_device* cam, const struct usb_device_id *id); + +/* Attach a probed sensor to the camera. */ +extern void +sn9c102_attach_sensor(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor); + +/* + Each SN9C10x camera has proper PID/VID identifiers. + SN9C103 supports multiple interfaces, but we only handle the video class + interface. +*/ +#define SN9C102_USB_DEVICE(vend, prod, intclass) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .bInterfaceClass = (intclass) + +#define SN9C102_ID_TABLE \ +static const struct usb_device_id sn9c102_id_table[] = { \ + { USB_DEVICE(0x0c45, 0x6001), }, /* TAS5110C1B */ \ + { USB_DEVICE(0x0c45, 0x6005), }, /* TAS5110C1B */ \ + { USB_DEVICE(0x0c45, 0x6007), }, \ + { USB_DEVICE(0x0c45, 0x6009), }, /* PAS106B */ \ + { USB_DEVICE(0x0c45, 0x600d), }, /* PAS106B */ \ + { USB_DEVICE(0x0c45, 0x6024), }, \ + { USB_DEVICE(0x0c45, 0x6025), }, /* TAS5130D1B and TAS5110C1B */ \ + { USB_DEVICE(0x0c45, 0x6028), }, /* PAS202BCB */ \ + { USB_DEVICE(0x0c45, 0x6029), }, /* PAS106B */ \ + { USB_DEVICE(0x0c45, 0x602a), }, /* HV7131D */ \ + { USB_DEVICE(0x0c45, 0x602b), }, /* MI-0343 */ \ + { USB_DEVICE(0x0c45, 0x602c), }, /* OV7630 */ \ + { USB_DEVICE(0x0c45, 0x602d), }, \ + { USB_DEVICE(0x0c45, 0x602e), }, /* OV7630 */ \ + { USB_DEVICE(0x0c45, 0x6030), }, /* MI03x */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x6080, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x6082, 0xff), }, /* MI0343 & MI0360 */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x6083, 0xff), }, /* HV7131[D|E1] */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x6088, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x608a, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x608b, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x608c, 0xff), }, /* HV7131/R */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x608e, 0xff), }, /* CIS-VF10 */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x608f, 0xff), }, /* OV7630 */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a0, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a2, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a3, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60a8, 0xff), }, /* PAS106B */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60aa, 0xff), }, /* TAS5130D1B */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ab, 0xff), }, /* TAS5110C1B */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ac, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ae, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60af, 0xff), }, /* PAS202BCB */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b0, 0xff), }, /* OV7630 (?) */ \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b2, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b3, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60b8, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60ba, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60bb, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60bc, 0xff), }, \ + { SN9C102_USB_DEVICE(0x0c45, 0x60be, 0xff), }, \ + { } \ +}; + +/*****************************************************************************/ + +/* + Read/write routines: they always return -1 on error, 0 or the read value + otherwise. NOTE that a real read operation is not supported by the SN9C10X + chip for some of its registers. To work around this problem, a pseudo-read + call is provided instead: it returns the last successfully written value + on the register (0 if it has never been written), the usual -1 on error. +*/ + +/* The "try" I2C I/O versions are used when probing the sensor */ +extern int sn9c102_i2c_try_write(struct sn9c102_device*,struct sn9c102_sensor*, + u8 address, u8 value); +extern int sn9c102_i2c_try_read(struct sn9c102_device*,struct sn9c102_sensor*, + u8 address); + +/* + These must be used if and only if the sensor doesn't implement the standard + I2C protocol. There are a number of good reasons why you must use the + single-byte versions of these functions: do not abuse. The first function + writes n bytes, from data0 to datan, to registers 0x09 - 0x09+n of SN9C10X + chip. The second one programs the registers 0x09 and 0x10 with data0 and + data1, and places the n bytes read from the sensor register table in the + buffer pointed by 'buffer'. Both the functions return -1 on error; the write + version returns 0 on success, while the read version returns the first read + byte. +*/ +extern int sn9c102_i2c_try_raw_write(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 n, + u8 data0, u8 data1, u8 data2, u8 data3, + u8 data4, u8 data5); +extern int sn9c102_i2c_try_raw_read(struct sn9c102_device* cam, + struct sn9c102_sensor* sensor, u8 data0, + u8 data1, u8 n, u8 buffer[]); + +/* To be used after the sensor struct has been attached to the camera struct */ +extern int sn9c102_i2c_write(struct sn9c102_device*, u8 address, u8 value); +extern int sn9c102_i2c_read(struct sn9c102_device*, u8 address); + +/* I/O on registers in the bridge. Could be used by the sensor methods too */ +extern int sn9c102_write_regs(struct sn9c102_device*, u8* buff, u16 index); +extern int sn9c102_write_reg(struct sn9c102_device*, u8 value, u16 index); +extern int sn9c102_pread_reg(struct sn9c102_device*, u16 index); + +/* + NOTE: there are no exported debugging functions. To uniform the output you + must use the dev_info()/dev_warn()/dev_err() macros defined in device.h, + already included here, the argument being the struct device '&usbdev->dev' + of the sensor structure. Do NOT use these macros before the sensor is + attached or the kernel will crash! However, you should not need to notify + the user about common errors or other messages, since this is done by the + master module. +*/ + +/*****************************************************************************/ + +enum sn9c102_i2c_sysfs_ops { + SN9C102_I2C_READ = 0x01, + SN9C102_I2C_WRITE = 0x02, +}; + +enum sn9c102_i2c_frequency { /* sensors may support both the frequencies */ + SN9C102_I2C_100KHZ = 0x01, + SN9C102_I2C_400KHZ = 0x02, +}; + +enum sn9c102_i2c_interface { + SN9C102_I2C_2WIRES, + SN9C102_I2C_3WIRES, +}; + +#define SN9C102_MAX_CTRLS V4L2_CID_LASTP1-V4L2_CID_BASE+10 + +struct sn9c102_sensor { + char name[32], /* sensor name */ + maintainer[64]; /* name of the mantainer */ + + /* Supported operations through the 'sysfs' interface */ + enum sn9c102_i2c_sysfs_ops sysfs_ops; + + /* + These sensor capabilities must be provided if the SN9C10X controller + needs to communicate through the sensor serial interface by using + at least one of the i2c functions available. + */ + enum sn9c102_i2c_frequency frequency; + enum sn9c102_i2c_interface interface; + + /* + This identifier must be provided if the image sensor implements + the standard I2C protocol. + */ + u8 i2c_slave_id; /* reg. 0x09 */ + + /* + NOTE: Where not noted,most of the functions below are not mandatory. + Set to null if you do not implement them. If implemented, + they must return 0 on success, the proper error otherwise. + */ + + int (*init)(struct sn9c102_device* cam); + /* + This function will be called after the sensor has been attached. + It should be used to initialize the sensor only, but may also + configure part of the SN9C10X chip if necessary. You don't need to + setup picture settings like brightness, contrast, etc.. here, if + the corrisponding controls are implemented (see below), since + they are adjusted in the core driver by calling the set_ctrl() + method after init(), where the arguments are the default values + specified in the v4l2_queryctrl list of supported controls; + Same suggestions apply for other settings, _if_ the corresponding + methods are present; if not, the initialization must configure the + sensor according to the default configuration structures below. + */ + + struct v4l2_queryctrl qctrl[SN9C102_MAX_CTRLS]; + /* + Optional list of default controls, defined as indicated in the + V4L2 API. Menu type controls are not handled by this interface. + */ + + int (*get_ctrl)(struct sn9c102_device* cam, struct v4l2_control* ctrl); + int (*set_ctrl)(struct sn9c102_device* cam, + const struct v4l2_control* ctrl); + /* + You must implement at least the set_ctrl method if you have defined + the list above. The returned value must follow the V4L2 + specifications for the VIDIOC_G|C_CTRL ioctls. V4L2_CID_H|VCENTER + are not supported by this driver, so do not implement them. Also, + you don't have to check whether the passed values are out of bounds, + given that this is done by the core module. + */ + + struct v4l2_cropcap cropcap; + /* + Think the image sensor as a grid of R,G,B monochromatic pixels + disposed according to a particular Bayer pattern, which describes + the complete array of pixels, from (0,0) to (xmax, ymax). We will + use this coordinate system from now on. It is assumed the sensor + chip can be programmed to capture/transmit a subsection of that + array of pixels: we will call this subsection "active window". + It is not always true that the largest achievable active window can + cover the whole array of pixels. The V4L2 API defines another + area called "source rectangle", which, in turn, is a subrectangle of + the active window. The SN9C10X chip is always programmed to read the + source rectangle. + The bounds of both the active window and the source rectangle are + specified in the cropcap substructures 'bounds' and 'defrect'. + By default, the source rectangle should cover the largest possible + area. Again, it is not always true that the largest source rectangle + can cover the entire active window, although it is a rare case for + the hardware we have. The bounds of the source rectangle _must_ be + multiple of 16 and must use the same coordinate system as indicated + before; their centers shall align initially. + If necessary, the sensor chip must be initialized during init() to + set the bounds of the active sensor window; however, by default, it + usually covers the largest achievable area (maxwidth x maxheight) + of pixels, so no particular initialization is needed, if you have + defined the correct default bounds in the structures. + See the V4L2 API for further details. + NOTE: once you have defined the bounds of the active window + (struct cropcap.bounds) you must not change them.anymore. + Only 'bounds' and 'defrect' fields are mandatory, other fields + will be ignored. + */ + + int (*set_crop)(struct sn9c102_device* cam, + const struct v4l2_rect* rect); + /* + To be called on VIDIOC_C_SETCROP. The core module always calls a + default routine which configures the appropriate SN9C10X regs (also + scaling), but you may need to override/adjust specific stuff. + 'rect' contains width and height values that are multiple of 16: in + case you override the default function, you always have to program + the chip to match those values; on error return the corresponding + error code without rolling back. + NOTE: in case, you must program the SN9C10X chip to get rid of + blank pixels or blank lines at the _start_ of each line or + frame after each HSYNC or VSYNC, so that the image starts with + real RGB data (see regs 0x12, 0x13) (having set H_SIZE and, + V_SIZE you don't have to care about blank pixels or blank + lines at the end of each line or frame). + */ + + struct v4l2_pix_format pix_format; + /* + What you have to define here are: 1) initial 'width' and 'height' of + the target rectangle 2) the initial 'pixelformat', which can be + either V4L2_PIX_FMT_SN9C10X (for compressed video) or + V4L2_PIX_FMT_SBGGR8 3) 'priv', which we'll be used to indicate the + number of bits per pixel for uncompressed video, 8 or 9 (despite the + current value of 'pixelformat'). + NOTE 1: both 'width' and 'height' _must_ be either 1/1 or 1/2 or 1/4 + of cropcap.defrect.width and cropcap.defrect.height. I + suggest 1/1. + NOTE 2: The initial compression quality is defined by the first bit + of reg 0x17 during the initialization of the image sensor. + NOTE 3: as said above, you have to program the SN9C10X chip to get + rid of any blank pixels, so that the output of the sensor + matches the RGB bayer sequence (i.e. BGBGBG...GRGRGR). + */ + + int (*set_pix_format)(struct sn9c102_device* cam, + const struct v4l2_pix_format* pix); + /* + To be called on VIDIOC_S_FMT, when switching from the SBGGR8 to + SN9C10X pixel format or viceversa. On error return the corresponding + error code without rolling back. + */ + + /* + Do NOT write to the data below, it's READ ONLY. It is used by the + core module to store successfully updated values of the above + settings, for rollbacks..etc..in case of errors during atomic I/O + */ + struct v4l2_queryctrl _qctrl[SN9C102_MAX_CTRLS]; + struct v4l2_rect _rect; +}; + +/*****************************************************************************/ + +/* Private ioctl's for control settings supported by some image sensors */ +#define SN9C102_V4L2_CID_DAC_MAGNITUDE V4L2_CID_PRIVATE_BASE +#define SN9C102_V4L2_CID_GREEN_BALANCE V4L2_CID_PRIVATE_BASE + 1 +#define SN9C102_V4L2_CID_RESET_LEVEL V4L2_CID_PRIVATE_BASE + 2 +#define SN9C102_V4L2_CID_PIXEL_BIAS_VOLTAGE V4L2_CID_PRIVATE_BASE + 3 +#define SN9C102_V4L2_CID_GAMMA V4L2_CID_PRIVATE_BASE + 4 +#define SN9C102_V4L2_CID_BAND_FILTER V4L2_CID_PRIVATE_BASE + 5 +#define SN9C102_V4L2_CID_BRIGHT_LEVEL V4L2_CID_PRIVATE_BASE + 6 + +#endif /* _SN9C102_SENSOR_H_ */ -- cgit v1.1