From 62dd28d0c659db29bdb89cfe9f0aefe42f0adfe9 Mon Sep 17 00:00:00 2001 From: Tony Jago Date: Fri, 12 Aug 2011 00:19:11 -0300 Subject: [media] saa7164: Add support for another HVR2200 hardware revision Hauppauge have released a new model rev, sub id 8940, this adds support. [stoth@kernellabs.com: I modified Tony's patch slightly in relation to the card numbering in saa7164.h, appending rather than inserting the new card - normal practise] Signed-off-by: Tony Jago Signed-off-by: Steven Toth Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7164/saa7164-cards.c | 66 +++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) (limited to 'drivers/media/video/saa7164/saa7164-cards.c') diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c index 69822a4..c713691 100644 --- a/drivers/media/video/saa7164/saa7164-cards.c +++ b/drivers/media/video/saa7164/saa7164-cards.c @@ -203,6 +203,66 @@ struct saa7164_board saa7164_boards[] = { .i2c_reg_len = REGLEN_8bit, } }, }, + [SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = { + .name = "Hauppauge WinTV-HVR2200", + .porta = SAA7164_MPEG_DVB, + .portb = SAA7164_MPEG_DVB, + .portc = SAA7164_MPEG_ENCODER, + .portd = SAA7164_MPEG_ENCODER, + .porte = SAA7164_MPEG_VBI, + .portf = SAA7164_MPEG_VBI, + .chiprev = SAA7164_CHIP_REV3, + .unit = {{ + .id = 0x1d, + .type = SAA7164_UNIT_EEPROM, + .name = "4K EEPROM", + .i2c_bus_nr = SAA7164_I2C_BUS_0, + .i2c_bus_addr = 0xa0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x04, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x05, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1b, + .type = SAA7164_UNIT_TUNER, + .name = "TDA18271-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0xc0 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1c, + .type = SAA7164_UNIT_ANALOG_DEMODULATOR, + .name = "TDA8290-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x84 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1e, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-1", + .i2c_bus_nr = SAA7164_I2C_BUS_1, + .i2c_bus_addr = 0x10 >> 1, + .i2c_reg_len = REGLEN_8bit, + }, { + .id = 0x1f, + .type = SAA7164_UNIT_DIGITAL_DEMODULATOR, + .name = "TDA10048-2", + .i2c_bus_nr = SAA7164_I2C_BUS_2, + .i2c_bus_addr = 0x12 >> 1, + .i2c_reg_len = REGLEN_8bit, + } }, + }, [SAA7164_BOARD_HAUPPAUGE_HVR2250] = { .name = "Hauppauge WinTV-HVR2250", .porta = SAA7164_MPEG_DVB, @@ -426,6 +486,10 @@ struct saa7164_subid saa7164_subids[] = { .subvendor = 0x0070, .subdevice = 0x8851, .card = SAA7164_BOARD_HAUPPAUGE_HVR2250_2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8940, + .card = SAA7164_BOARD_HAUPPAUGE_HVR2200_4, }, }; const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids); @@ -469,6 +533,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev) case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: @@ -549,6 +614,7 @@ void saa7164_card_setup(struct saa7164_dev *dev) case SAA7164_BOARD_HAUPPAUGE_HVR2200: case SAA7164_BOARD_HAUPPAUGE_HVR2200_2: case SAA7164_BOARD_HAUPPAUGE_HVR2200_3: + case SAA7164_BOARD_HAUPPAUGE_HVR2200_4: case SAA7164_BOARD_HAUPPAUGE_HVR2250: case SAA7164_BOARD_HAUPPAUGE_HVR2250_2: case SAA7164_BOARD_HAUPPAUGE_HVR2250_3: -- cgit v1.1