From 117a55b69d36a19028d1c59a737ad1246a0a75ad Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 18 Jul 2012 05:46:46 -0300 Subject: [media] ad9389b: driver for the Analog Devices AD9389B video encoder Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1741 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - No HDCP repeater support (we don't use that either) I'm sure that there are more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/i2c/Kconfig | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers/media/i2c/Kconfig') diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 322093c..0e0793a 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -387,6 +387,17 @@ config VIDEO_ADV7393 To compile this driver as a module, choose M here: the module will be called adv7393. +config VIDEO_AD9389B + tristate "Analog Devices AD9389B encoder" + depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API + ---help--- + Support for the Analog Devices AD9389B video encoder. + + This is a Analog Devices HDMI transmitter. + + To compile this driver as a module, choose M here: the + module will be called ad9389b. + config VIDEO_AK881X tristate "AK8813/AK8814 video encoders" depends on I2C -- cgit v1.1